The mechanism of high affinity pentasaccharide binding to antithrombin,insights from Gaussian accelerated molecular dynamics simulations

Abstract

The activity of antithrombin (AT), a serpin protease inhibitor, is enhanced by heparin and heparin analogs against its target proteases, mainly thrombin, factors Xa and IXa. Considerable amount of information is available on the multistep mechanism of the heparin pentasaccharide binding and conformational activation. However, much of the details were inferred from ‘static’ structures obtained by X-ray diffraction. Moreover, limited information is available for the early steps of binding mechanism other than kinetic studies with various ligands. To gain insights into these processes, we performed enhanced sampling molecular dynamics (MD) simulations using the Gaussian Accelerated Molecular Dynamics (GAMD) method, applied previously in drug binding studies. We were able to observe the binding of the pentasaccharide idraparinux to a ‘non-activated’ AT conformation in two separate trajectories with low root mean square deviation (RMSD) values compared to X-ray structures of the bound state. These trajectories along with further simulations of the AT-pentasaccharide complex provided insights into the mechanisms of multiple conformational transitions, including the expulsion of the hinge region, the extension of helix D and the conformational behavior of the reactive center loop (RCL). We could also confirm the high stability of helix P in non-activated AT conformations, such states might play an important role in heparin binding. ‘Generalized correlation’ matrices revealed possible paths of allosteric signal propagation to the binding sites for the target proteases, factors Xa and IXa. Enhanced MD simulations of ligand binding to AT may assist the design of new anticoagulant drugs.

Communicated by Ramaswamy H. Sarma     

Disruption of a tight cluster surrounding tyrosine 131 in the native conformation of antithrombin III activates it for factor Xa inhibition

The native conformation of antithrombin III (ATIII) is a poor inhibitor of its coagulation pathway target enzymes because of the partial insertion of its reactive center loop (RCL) in its central A beta-sheet. This study focused on tyrosine 131, which is located at the helix D-sheet A interface, adjacent to the ATIII pentasaccharide and heparin cofactor-binding sites and some 17A away from the RCL insertion. Crystallographic structures show that the Tyr(131) ring is buried in native ATIII and then becomes exposed when pentasaccharide binds to the inhibitor and activates it. This change suggested that Tyr(131) might serve as a switch for ATIII conformational activation. The hypothesis is supported by results from this study, which progressively removed atoms from the Tyr(131) side chain. Rates of heparin-independent Y131L and Y131A factor Xa inhibition were 25 and 29 times faster than for the control and Y131F, suggesting that Tyr(131) ring interactions with neighboring helix D and strand 2A residues shift the uncatalyzed native-to-activated conformational equilibrium toward the RCL-inserted state. Thermal denaturation experiments showed Y131A and Y131L were less stable than the control and Y131F, implying an increased tendency toward A-sheet mobility in these genetically activated molecules. Thus, the tight Tyr(131)-Asn(127)-Leu(130)-Leu(140)-Ser(142) cluster at the helix D-strand 2A interface of native antithrombin contributes significantly to the stability of the ground state conformation, and tyrosine 131 serves as a heparin-responsive molecular switch during the allosteric activation of ATIII anticoagulant activity.     

Antithrombin conformational modulation by D-myo-inositol 3,4,5,6-tetrakisphosphate (TMI), a novel scaffold for the development of antithrombotic agents

Antithrombin (AT) is a serpin that inhibits mainly thrombin and fXa after being activated by binding to glycosaminoglycans as heparin and heparan sulfate. Upon binding, the native AT conformation, relatively inactive as a protease inhibitor, is converted to an activated form. Recently, a new compound, named TMI, was discovered in our group with nanomolar affinity to antithrombin, and shown to be able to induce a partial activation of antithrombin. As TMI represents an original scaffold for structural optimizations aiming the development of new antithrombotic drugs, the present work demonstrated, through a series of molecular dynamics simulations, that TMI is able to modulate AT reactive center loop flexibility similarly to what is observed to heparin, as well as exposing AT P1 residue, Arg393. These results represent the first atomic level indication of AT conformational activation by TMI, and may offer a predictive basis for future studies aiming TMI structural optimization.     

Kinetic evidence that allosteric activation of antithrombin by heparin is mediated by two sequential conformational changes

The serpin, antithrombin, requires allosteric activation by a sequence-specific pentasaccharide unit of heparin or heparan sulfate glycosaminoglycans to function as an anticoagulant regulator of blood clotting proteases. Surprisingly, X-ray structures have shown that the pentasaccharide produces similar induced-fit changes in the heparin binding site of native and latent antithrombin despite large differences in the heparin affinity and global conformation of these two forms. Here we present kinetic evidence for similar induced-fit mechanisms of pentasaccharide binding to native and latent antithrombins and kinetic simulations which together support a three-step mechanism of allosteric activation of native antithrombin involving two successive conformational changes. Equilibrium binding studies of pentasaccharide interactions with native and latent antithrombins and the salt dependence of these interactions suggest that each conformational change is associated with distinct spectroscopic changes and is driven by a progressively better fit of the pentasaccharide in the binding site. The observation that variant antithrombins that cannot undergo the second conformational change bind the pentasaccharide like latent antithrombin and are partially activated suggests that both conformational changes contribute to allosteric activation, in agreement with a recently proposed model of allosteric activation.     

Crystal structure of antithrombin in a heparin-bound intermediate state

Antithrombin is activated as an inhibitor of the coagulation proteases through its specific interaction with a heparin pentasaccharide. The binding of heparin induces a global conformational change in antithrombin which results in the freeing of its reactive center loop for interaction with target proteases and a 1000-fold increase in heparin affinity. The allosteric mechanism by which the properties of antithrombin are altered by its interactions with the specific pentasaccharide sequence of heparin is of great interest to the medical and protein biochemistry communities. Heparin binding has previously been characterized as a two-step, three-state mechanism where, after an initial weak interaction, antithrombin undergoes a conformational change to its high-affinity state. Although the native and heparin-activated states have been determined through protein crystallography, the number and magnitude of conformational changes render problematic the task of determining which account for the improved heparin affinity and how the heparin binding region is linked to the expulsion of the reactive center loop. Here we present the structure of an intermediate pentasaccharide-bound conformation of antithrombin which has undergone all of the conformational changes associated with activation except loop expulsion and helix D elongation. We conclude that the basis of the high-affinity state is not improved interaction with the pentasaccharide but a lowering of the global free energy due to conformational changes elsewhere in antithrombin. We suggest a mechanism in which the role of helix D elongation is to lock antithrombin in the five-stranded fully activated conformation.     

Helix D elongation and allosteric activation of antithrombin.

Antithrombin requires allosteric activation by heparin for efficient inhibition of its target protease, factor Xa. A pentasaccharide sequence found in heparin activates antithrombin by inducing conformational changes that affect the reactive center of the inhibitor resulting in optimal recognition by factor Xa. The mechanism of transmission of the activating conformational change from the heparin-binding region to the reactive center loop remains unresolved. To investigate the role of helix D elongation in the allosteric activation of antithrombin, we substituted a proline residue for Lys(133). Heparin binding affinity was reduced by 25-fold for the proline variant compared with the control, and a significant decrease in the associated intrinsic fluorescence enhancement was also observed. Rapid kinetic studies revealed that the main reason for the reduced affinity for heparin was an increase in the rate of the reverse conformational change step. The pentasaccharide-accelerated rate of factor Xa inhibition for the proline variant was 10-fold lower than control, demonstrating that the proline variant cannot be fully activated toward factor Xa. We conclude that helix D elongation is critical for the full conversion of antithrombin to its high affinity, activated state, and we propose a mechanism to explain how helix D elongation is coupled to allosteric activation.     

Crystal structure of monomeric native antithrombin reveals a novel reactive center loop conformation

The poor inhibitory activity of circulating antithrombin (AT) is critical to the formation of blood clots at sites of vascular damage. AT becomes an efficient inhibitor of the coagulation proteases only after binding to a specific heparin pentasaccharide, which alters the conformation of the reactive center loop (RCL). The molecular basis of this activation event lies at the heart of the regulation of hemostasis and accounts for the anticoagulant properties of the low molecular weight heparins. Although several structures of AT have been solved, the conformation of the RCL in native AT remains unknown because of the obligate crystal contact between the RCL of native AT and its latent counterpart. Here we report the crystallographic structure of a variant of AT in its monomeric native state. The RCL shifted approximately 20 A, and a salt bridge was observed between the P1 residue (Arg-393) and Glu-237. This contact explains the effect of mutations at the P1 position on the affinity of AT for heparin and also the properties of AT-Truro (E237K). The relevance of the observed conformation was verified through mutagenesis studies and by solving structures of the same variant in different crystal forms. We conclude that the poor inhibitory activity of the circulating form of AT is partially conferred by intramolecular contacts that restrain the RCL, orient the P1 residue away from attacking proteases, and additionally block the exosite utilized in protease recognition.     

Monoclonal antibodies against antithrombin III. Identification of their epitopes and effects on antithrombin III activities

Four monoclonal antibodies with distinct epitopes were prepared against antithrombin III. None of them is directed against the heparin-binding region nor the active site, yet two mAb namely A36 and B108, interfere with antithrombin III inhibition of thrombin. The epitope of monoclonal antibody A36 is located within amino acid residues 1-393, at a site different from the active site since it recognizes antithrombin III and antithrombin-III-thrombin complexes with the same affinity. A36 partially prevents the intrinsic antithrombin III activity and has no effect on the heparin-enhanced antithrombin III activity when added to the antithrombin-III--heparin complex. If A36 is first reacted with antithrombin III and then heparin is added to the reaction mixture, A36 fixes the conformation of antithrombin III so that heparin binds to antithrombin III, but is not able to induce the conformational change in the antithrombin III molecule required for the enhanced activity. The epitope for monoclonal antibody B108 is located within residues 282-393, close to the active site. It does not recognize antithrombin-III-thrombin complexes by solid-phase radioimmunoassay. Its binding to antithrombin III induces a conformational change that enhances antithrombin III activity in a manner that resembles the heparin effect, but its effect is additive to the heparin effect, since when it was added to a reaction mixture which contained a saturating amount of heparin, inhibition of thrombin was enhanced. The epitope for monoclonal antibody A5 is located within residues 1-393, and its recognition of antithrombin III or antithrombin-III-thrombin is strongly dependent on the integrity of the disulfide bonds. A5 has no effect on antithrombin III activities. The epitope for monoclonal antibody A10 is well defined within a narrow range of 55 amino acid residues, 339-393, on the antithrombin III molecule, close to the active site, yet it has no effect on antithrombin III inhibitory activity. These monoclonal antibodies may be developed for various diagnostic or clinical purposes and offer a powerful tool for studying the conformational changes and structure/activity relationships in the antithrombin III molecule.     

The role of tryptophan residues in heparin-antithrombin interactions

A single tryptophan residue on antithrombin has been modified with dimethyl-(2-hydroxy-5-nitrobenzyl)sulfonium bromide. This alteration led to a 500-fold reduction in the heparin-dependent acceleration of thrombin-modified antithrombin interactions, as well as a 10-fold decrease in the avidity of the modified protease inhibitor for mucopolysaccharide. Preincubation of antithrombin with the octasaccharide binding domain of heparin prior to treatment with dimethyl-(2-hydroxy-5-nitrobenzyl)sulfonium bromide was able to suppress modification of the critical tryptophan and preserve the functional capacities of the protease inhibitor. Fluorescence quenching experiments indicated that the modifiable tryptophan groups of antithrombin were exposed to the solvent environment. Based upon these data, it was proposed that the loss of “heparin cofactor” activity of antithrombin must be predominantly due to an inability of the modified protease inhibitor to undergo a conformational transition required for mucopolysaccharide-dependent “activation” of the macromolecule.     

The structure of a mutant insulin uncouples receptor binding from protein allostery. An electrostatic block to the TR transition

The zinc insulin hexamer undergoes allosteric reorganization among three conformational states, designated T(6), T(3)R(3)(f), and R(6). Although the free monomer in solution (the active species) resembles the classical T-state, an R-like conformational change is proposed to occur upon receptor binding. Here, we distinguish between the conformational requirements of receptor binding and the crystallographic TR transition by design of an active variant refractory to such reorganization. Our strategy exploits the contrasting environments of His(B5) in wild-type structures: on the T(6) surface but within an intersubunit crevice in R-containing hexamers. The TR transition is associated with a marked reduction in His(B5) pK(a), in turn predicting that a positive charge at this site would destabilize the R-specific crevice. Remarkably, substitution of His(B5) (conserved among eutherian mammals) by Arg (occasionally observed among other vertebrates) blocks the TR transition, as probed in solution by optical spectroscopy. Similarly, crystallization of Arg(B5)-insulin in the presence of phenol (ordinarily a potent inducer of the TR transition) yields T(6) hexamers rather than R(6) as obtained in control studies of wild-type insulin. The variant structure, determined at a resolution of 1.3A, closely resembles the wild-type T(6) hexamer. Whereas Arg(B5) is exposed on the protein surface, its side chain participates in a solvent-stabilized network of contacts similar to those involving His(B5) in wild-type T-states. The substantial receptor-binding activity of Arg(B5)-insulin (40% relative to wild type) demonstrates that the function of an insulin monomer can be uncoupled from its allosteric reorganization within zinc-stabilized hexamers.     

The Allosteric Mechanism of Activation of Antithrombin as an Inhibitor of Factor IXa and Factor Xa: HEPARIN-INDEPENDENT FULL ACTIVATION THROUGH MUTATIONS ADJACENT TO HELIX D*

Allosteric conformational changes in antithrombin induced by binding a specific heparin pentasaccharide result in very large increases in the rates of inhibition of factors IXa and Xa but not of thrombin. These are accompanied by CD, fluorescence, and NMR spectroscopic changes. X-ray structures show that heparin binding results in extension of helix D in the region 131–136 with coincident, and possibly coupled, expulsion of the hinge of the reactive center loop. To examine the importance of helix D extension, we have introduced strong helix-promoting mutations in the 131–136 region of antithrombin (YRKAQK to LEEAAE). The resulting variant has endogenous fluorescence indistinguishable from WT antithrombin yet, in the absence of heparin, shows massive enhancements in rates of inhibition of factors IXa and Xa (114- and 110-fold, respectively), but not of thrombin, together with changes in near- and far-UV CD and ¹H NMR spectra. Heparin binding gives only ∼3–4-fold further rate enhancement but increases tryptophan fluorescence by ∼23% without major additional CD or NMR changes. Variants with subsets of these mutations show intermediate activation in the absence of heparin, again with basal fluorescence similar to WT and large increases upon heparin binding. These findings suggest that in WT antithrombin there are two major complementary sources of conformational activation of antithrombin, probably involving altered contacts of side chains of Tyr-131 and Ala-134 with core hydrophobic residues, whereas the reactive center loop hinge expulsion plays only a minor additional role.     

Role of arginine 129 in heparin binding and activation of antithrombin

The contribution of Arg(129) of the serpin, antithrombin, to the mechanism of allosteric activation of the protein by heparin was determined from the effect of mutating this residue to either His or Gln. R129H and R129Q antithrombins bound pentasaccharide and full-length heparins containing the antithrombin recognition sequence with similar large reductions in affinity ranging from 400- to 2500-fold relative to the control serpin, corresponding to a loss of 28-35% of the binding free energy. The salt dependence of pentasaccharide binding showed that the binding defect of the mutant serpin resulted from the loss of approximately 2 ionic interactions, suggesting that Arg(129) binds the pentasaccharide cooperatively with other residues. Rapid kinetic studies showed that the mutation minimally affected the initial low affinity binding of heparin to antithrombin, but greatly affected the subsequent conformational activation of the serpin leading to high affinity heparin binding, although not enough to disfavor activation. Consistent with these findings, the mutant antithrombin was normally activated by heparin for accelerated inhibition of factor Xa and thrombin. These results support an important role for Arg(129) in an induced-fit mechanism of heparin activation of antithrombin wherein conformational activation of the serpin positions Arg(129) and other residues for cooperative interactions with the heparin pentasaccharide so as to lock the serpin in the activated state.     

Reactivities of the S2 and S3 subsite residues of thrombin with the native and heparin-induced conformers of antithrombin.

A pentasaccharide (PS) fragment of heparin capable of activating antithrombin (AT) markedly accelerates the inhibition of factor Xa by AT, but has insignificant effect on inhibition of thrombin. For inhibition of thrombin, the bridging function of a longer polysaccharide chain is required to accelerate the reaction. To study the basis for the similar reactivity of thrombin with the native or heparin-activated conformers of AT, several residues surrounding the active site pocket of thrombin were targeted for mutagenesis study. Leu99 and Glu192, the variant residues influencing the S2 and S3 subsite specificity of thrombin were replaced with Tyr and Gln. The Tyr60a, Pro60b, Pro60c, and Trp60d residues forming part of the S2 specificity pocket were deleted from the B-insertion loop of the wild-type and Leu99/Glu192 --> Tyr/Gln thrombins. Kinetic studies indicated that the reactivities of all mutants with AT were moderately or severely impaired. Although heparin largely corrected the defect in reactivities, it also markedly elevated the stoichiometries of inhibition with the mutants. Interestingly, PS also accelerated AT inhibition of the mutants 5-68-fold, suggesting that the mutants are able to discriminate between the native and activated conformers of AT. Based on these results and the recent crystal structure determination of AT in complex with PS, a model for thrombin-AT interaction is proposed in which the S2 and S3 subsite residues of thrombin are critical for recognition of the P2 and P3 residues of AT in the native conformation. In the activated conformation, other residues are made accessible for interaction with the protease, and the similar reactivity of thrombin with the native and heparin-activated conformers of AT may be coincidental. The results further suggest that the S2 and S3 subsite residues are crucial in controlling the partitioning of the thrombin-AT intermediate into the alternative inhibitory or substrate pathways of the reaction.     

A strained DNA binding helix is conserved for site recognition,folding nucleation,and conformational modulation

Nucleic acid recognition is often mediated by α‐helices or disordered regions that fold into α‐helix on binding. A peptide bearing the DNA recognition helix of HPV16 E2 displays type II polyproline (PII) structure as judged by pH, temperature, and solvent effects on the CD spectra. NMR experiments indicate that the canonical α‐helix is stabilized at the N‐terminus, while the PII forms at the C‐terminus half of the peptide. Re‐examination of the dihedral angles of the DNA binding helix in the crystal structure and analysis of the NMR chemical shift indexes confirm that the N‐terminus half is a canonical α‐helix, while the C‐terminal half adopts a 3₁₀ helix structure. These regions precisely match two locally driven folding nucleii, which partake in the native hydrophobic core and modulate a conformational switch in the DNA binding helix. The peptide shows only weak and unspecific residual DNA binding, 10⁴‐fold lower affinity, and 500‐fold lower discrimination capacity compared with the domain. Thus, the precise side chain conformation required for modulated and tight physiological binding by HPV E2 is largely determined by the noncanonical strained α‐helix conformation, “presented” by this unique architecture. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 432–443, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Roles of N-terminal region residues Lys11, Arg13, and Arg24 of antithrombin in heparin recognition and in promotion and stabilization of the heparin-induced conformational change

The N-terminal region residues, Lys11, Arg13, and Arg24, of the plasma coagulation inhibitor, antithrombin, have been implicated in binding of the anticoagulant polysaccharide, heparin, from the identification of natural mutants with impaired heparin binding or by the X-ray structure of a complex of the inhibitor with a high-affinity heparin pentasaccharide. Mutations of Lys11 or Arg24 to Ala in this work each reduced the affinity for the pentasaccharide approximately 40-fold, whereas mutation of Arg13 to Ala led to a decrease of only approximately 7-fold. All three substitutions resulted in the loss of one ionic interaction with the pentasaccharide and those of Lys11 or Arg24 also in 3-5-fold losses in affinity of nonionic interactions. Only the mutation of Lys11 affected the initial, weak interaction step of pentasaccharide binding, decreasing the affinity of this step approximately 2-fold. The mutations of Lys11 and Arg13 moderately, 2-7-fold, altered both rate constants of the second, conformational change step, whereas the substitution of Arg24 appreciably, approximately 25-fold, reduced the reverse rate constant of this step. The N-terminal region of antithrombin is thus critical for high-affinity heparin binding, Lys11 and Arg24 being responsible for maintaining appreciable and comparable binding energy, whereas Arg13 is less important. Lys11 is the only one of the three residues that is involved in the initial recognition step, whereas all three residues participate in the conformational change step. Lys11 and Arg13 presumably bind directly to the heparin pentasaccharide by ionic, and in the case of Lys11, also nonionic interactions. However, the role of Arg24 most likely is indirect, to stabilize the heparin-induced P-helix by interacting intramolecularly with Glu113 and Asp117, thereby positioning the crucial Lys114 residue for optimal ionic and nonionic interactions with the pentasaccharide. Together, these findings show that N-terminal residues of antithrombin make markedly different contributions to the energetics and dynamics of binding of the pentasaccharide ligand to the native and activated conformational states of the inhibitor that could not have been predicted from the X-ray structure.     

Importance of tryptophan 49 of antithrombin in heparin binding and conformational activation

Tryptophan 49 of antithrombin, the primary inhibitor of blood clotting proteinases, has previously been implicated in binding the allosteric activator, heparin, by chemical modification and mutagenesis studies. However, the X-ray cocrystal structure of the antithrombin-pentasaccharide complex shows that Trp49 does not contact the bound saccharide. Here, we provide a detailed thermodynamic and kinetic characterization of heparin binding to a Trp49 to Lys variant of antithrombin and suggest a model for how Trp49 participates in heparin binding and activation. Mutation of Trp49 to Lys resulted in substantial losses of 16-24% in heparin-binding energy at pH 7.4, I 0.15, and 25 degrees C. These losses were due to both the loss of one ionic interaction ( approximately 30%) and the loss of nonionic interactions ( approximately 70%). Rapid kinetics analyses showed that the mutation minimally affected the initial weak binding of heparin to antithrombin or the rate constant for the subsequent conformational activation of the serpin. Rather, the principal effect of the mutation was to increase the rate constant for reversal of the conformational activation step by 70-100-fold, thereby destabilizing the activated conformation. This destabilization could be accounted for by the disruption of a network of interactions involving Trp49, Glu50, and Lys53 of helix A and Ser112 of helix P, which stabilizes the activated conformation.     

两例抗凝血蛋白缺乏患者的基因诊断

目的:探讨导致蛋白C、蛋白S、抗凝血酶缺乏症的分子发病机制。方法:检测蛋白C活性(PC:C)、蛋白S活性(PS:C)以及抗凝血酶活性(AT:C);PCR法分别扩增患者PC、PS、AT基因序列,寻找突变点。结果:蛋白C合并蛋白S合并抗凝血酶AT缺乏患者PC基因启动子区域存在C4867T杂合突变(NG_016323.1),为蛋白C基因的多态性位点;在蛋白S基因第四号外显子区域有G68395T杂合突变(NG_009813.1),导致Arg90Leu(NP_000304.2),为国际首次报道。遗传性PS缺陷在家系:四名家系成员均检测到PS基因第四号外显子区域一个杂合(错义)突变,G68395T(NG_009813.1)。结论:PC基因启动子的多态性位点C4867T杂合突变(NG_016323.1),PS基因第四号外显子区域的G68395T杂合突变(NG_009813.1),可能是导致患者PC、PS联合缺乏的原因。PS基因第四号外显子区域G68395T(NG_009813.1)杂合突变,可能是导致PS缺陷症家系成员PS缺乏的原因。     

Allosteric activation of antithrombin is independent of charge neutralization or reversal in the heparin binding site

We investigate the hypothesis that heparin activates antithrombin (AT) by relieving electrostatic strain within helix D. Mutation of residues K125 and R129 to either Ala or Glu abrogated heparin binding, but did not activate AT towards inhibition of factors IXa or Xa. However, substitution of residues C-terminal to helix D (R132 and K133) to Ala had minimal effect on heparin affinity but resulted in appreciable activation. We conclude that charge neutralization or reversal in the heparin binding site does not drive the activating conformational change of AT, and that the role of helix D elongation is to stabilize the activated state.     

Molecular mechanisms of antithrombin–heparin regulation of blood clotting proteinases. A paradigm for understanding proteinase regulation by serpin family protein proteinase inhibitors

Serpin family protein proteinase inhibitors regulate the activity of serine and cysteine proteinases by a novel conformational trapping mechanism that may itself be regulated by cofactors to provide a finely-tuned time and location-dependent control of proteinase activity. The serpin, antithrombin, together with its cofactors, heparin and heparan sulfate, perform a critical anticoagulant function by preventing the activation of blood clotting proteinases except when needed at the site of a vascular injury. Here, we review the detailed molecular understanding of this regulatory mechanism that has emerged from numerous X-ray crystal structures of antithrombin and its complexes with heparin and target proteinases together with mutagenesis and functional studies of heparin–antithrombin–proteinase interactions in solution. Like other serpins, antithrombin achieves specificity for its target blood clotting proteinases by presenting recognition determinants in an exposed reactive center loop as well as in exosites outside the loop. Antithrombin reactivity is repressed in the absence of its activator because of unfavorable interactions that diminish the favorable RCL and exosite interactions with proteinases. Binding of a specific heparin or heparan sulfate pentasaccharide to antithrombin induces allosteric activating changes that mitigate the unfavorable interactions and promote template bridging of the serpin and proteinase. Antithrombin has thus evolved a sophisticated means of regulating the activity of blood clotting proteinases in a time and location-dependent manner that exploits the multiple conformational states of the serpin and their differential stabilization by glycosaminoglycan cofactors.     

On the functional role of Arg172 in substrate binding and allosteric transition in Escherichia coli glucosamine-6-phosphate deaminase

Glucosamine-6-phosphate deaminase from Escherichia coli (EC 3.5.99.6) is an allosteric enzyme, activated by N-acetylglucosamine 6-phosphate, which converts glucosamine-6-phosphate into fructose 6-phosphate and ammonia. X-ray crystallographic structural models have showed that Arg172 and Lys208, together with the segment 41-44 of the main chain backbone, are involved in binding the substrate phospho group when the enzyme is in the R activated state. A set of mutants of the enzyme involving the targeted residues were constructed to analyze the role of Arg172 and Lys208 in deaminase allosteric function. The mutant enzymes were characterized by kinetic, chemical, and spectrometric methods, revealing conspicuous changes in their allosteric properties. The study of these mutants indicated that Arg172 which is located in the highly flexible motif 158-187 forming the active site lid has a specific role in binding the substrate to the enzyme in the T state. The possible role of this interaction in the conformational coupling of the active and the allosteric sites is discussed.