A novel approach to prepare extended DNA fibers in plants.

BACKGROUND: The extended DNA fiber preparation procedure is still imperfect in plants due to the existence of a hard cell wall; thus, high quality of extended DNA fibers for fluorescence in situ hybridization (FISH) analysis is often difficult to be obtained rapidly and efficiently. In this study we have developed a fast and widely effective method to prepare DNA fibers from various plant species and the fibers are suitable for fiber FISH mapping. METHODS: Fresh young leaves were chopped with a sharp sterile scalpel in a Petri dish that contained ice-cold nucleus isolation buffer followed by filtration through 33-mum nylon mesh. Nuclei were obtained by centrifuging the filtrates at high speed (16,000g) for 40 s. Nucleus lysis buffer (0.5% sodium dodecylsulfate, 5 mM ethylenediaminetetraacetic acid, 100 mM Tris, pH7.0) was added to nuclei on slides, and DNA fibers were dragged and extended with a clean coverslip. RESULTS: The key of this method is that liquid nitrogen grinding of leaves is replaced by chopping with a blade in ice-cold nucleus isolation buffer. With the liquid nitrogen method, over- or under-grinding of leaves occurs more frequently, and DNA fibers with the desired quality are not obtained easily. In contrast, it is easier to release nuclei from cells in nucleus isolation buffer by chopping, which results in fewer nuclei being destroyed. Highly extended, intact, and long DNA fibers can be generated to a great probability with this method. In addition, this method is very simple and rapid, requiring only 20 min for the entire process, and is also safe because poisonous mercaptoethanol is replaced by dithiothreitol. The results of fiber-FISH with maize genomic DNA and 45S rDNA as probes showed that DNA fiber size as long as 1.96 Mb could be measured. The successful and reliable preparation of maize, wild rice, and barley DNA fibers suitable for FISH mapping proves that this technique is a widely effective approach for obtaining extended DNA fibers in plants. CONCLUSIONS: A simple, rapid, safe, and widely effective method for getting extended DNA fibers has been developed in plants. (c) 2005 Wiley-Liss, Inc.     

Thermodynamics of single strand DNA base stacking

The thermodynamics of the stacking to unstacking transitions of 24 single-stranded DNA sequences (ssDNA), 10-12 bases in length, in sodium phosphate buffer were determined from 10 to 95 degrees C, using differential scanning calorimetry (DSC). An additional 22 ssDNA sequences did not exhibit an S<-->U transition in this temperature range. The transition properties of the ssDNA sequences with 相似文献   

Characterization of the base stacking interactions in DNA by means of Lennard-Jones empirical potentials

Three empirical potentials of the Lennard-Jones type taken from literature were used to calculate van der Waals contributions to the base-pair couples stacking energies in B-DNA and A-DNA type double helical conformations. The information obtained can be summarized as follows: (1) Purine-pyrimidine and purine-purine (pyrimidine-pyrimidine in the complementary strand) sequences preferred right-handed helical arrangement, whereas pyrimidine-purine sequences favoured left-handed (C-G) or unwound (T-A) stacking geometry; in the latter case this only held for B- but not A-DNA (the C-G sequence was not studied in A-DNA owing to difficulties (see below) with the G amino group in B-DNA); (2) Positive propeller twist of base-pairs was stable in both B- and A-DNA; the thymine methyl group promoted the propeller and this effect was strongest in the A-T step; (3) Tilt of base pairs occurred around zero in B-DNA and between 15-20 degrees C in A-DNA, in agreement with the experimental observations; (4) Vertical separation of base pairs was optimal within 0.33-0.34 nm for B-DNA and around 0.29 nm for A-DNA using the 9-6 potential. The 12-6 potential gave similar results with B-DNA as the 9-6 potential if, however, base pairs were separated by 0.35-0.36 nm; (5) The calculated effect of the guanine amino group was substantially stronger than expected on the basis of data derived from X-ray diffraction studies of oligonucleotide single crystals; (6) In comparison with the 9-6 potential, the 12-6 potential provided more strict energy minima. In summary, the empirical potentials reproduce, at least semiquantitatively, many but not all DNA properties; this should be taken into account whenever the potentials are used for prediction purposes.     

Efficiency of coaxial stacking depends on the DNA duplex structure

Thermodynamic parameters of coaxial stacking at complementary helix-helix interfaces GX*pYG/CZVC (X,Y=A,C,T,G;*-nick) created by contiguous oligonucleotide hybridization were determined. The data obtained were compared to the thermodynamic parameters of coaxial stacking at the interfaces CX*pYC/GZVG. Multiple linear regression analysis has revealed that the free-energy increments of interaction for the contacts GX*pYG/CZVC and CX*pYC/GZVG can be described by a set of uniform Delta G degrees(X*pY/ZV) values. The difference in the observed free-energy of the coaxial stacking between the two sets is defined by the contribution from the factors reflecting structural differences between compared DNA duplexes.     

Evaluating the contribution of base stacking during translesion DNA replication

Despite the nontemplating nature of the abasic site, dAMP is often preferentially inserted opposite the lesion, a phenomenon commonly referred to as the "A-rule". We have evaluated the molecular mechanism accounting for this unique behavior using a thorough kinetic approach to evaluate polymerization efficiency during translesion DNA replication. Using the bacteriophage T4 DNA polymerase, we have measured the insertion of a series of modified nucleotides and have demonstrated that increasing the size of the nucleobase does not correlate with increased insertion efficiency opposite an abasic site. One analogue, 5-nitroindolyl-2'-deoxyriboside triphosphate, was unique as it was inserted opposite the lesion with approximately 1000-fold greater efficiency compared to that for dAMP insertion. Pre-steady-state kinetic measurements yield a kpol value of 126 s(-1) and a Kd value of 18 microM for the insertion of 5-nitroindolyl-2'-deoxyriboside triphosphate opposite the abasic site. These values rival those associated with the enzymatic formation of a natural Watson-Crick base pair. These results not only reiterate that hydrogen bonding is not necessary for nucleotide insertion but also indicate that the base-stacking and/or desolvation capabilities of the incoming nucleobase may indeed play the predominant role in generating efficient DNA polymerization. A model accounting for the increase in catalytic efficiency of this unique nucleobase is provided and invokes pi-pi stacking interactions of the aromatic moiety of the incoming nucleobase with aromatic amino acids present in the polymerase's active site. Finally, differences in the rate of 5-nitroindolyl-2'-deoxyriboside triphosphate insertion opposite an abasic site are measured between the bacteriophage T4 DNA polymerase and the Klenow fragment. These kinetic differences are interpreted with regard to the differences in various structural components between the two enzymes and are consistent with the proposed model for DNA polymerization.     

Poor base stacking at DNA lesions may initiate recognition by many repair proteins

A fundamental question in DNA repair is how a mismatched or modified base is detected when embedded in millions to billions of normal base pairs. A survey of the literature and structural database reveals a common feature in all repair protein-DNA complexes: the DNA double helix is discontinuous at a lesion site due to base unstacking, kinking and/or nucleotide extrusion. Lesions induce destabilization and distortion of short linear DNAs, and underwinding in negatively supercoiled DNA presumably could compound the reduced stability caused by a lesion. A hypothesis is thus put forward that DNA lesion recognition occurs in two steps. Repair proteins initially recognize the weakened base stacking, and thus a flexible hinge at a DNA lesion. Sampling of flexible hinges rather than all DNA base pairs can reduce the task of finding a lesion by two to three orders of magnitude, from searching millions base pairs to thousands. After the initial encounter, a repair protein scrutinizes the shape, hydrogen bonding and electrostatic potentials of bases at the flexible hinge and dissociates if it is not a correct substrate. MutS, which has a broad range of substrates, actively dissociates from non-specific binding via an ATP-dependent proofreading mechanism. A single lesion may thus be sampled by BER, NER and MMR proteins until repaired. This proposition immediately suggests a mechanism for crosstalk between different repair and signaling pathways. It also raises the possibility that sampling of a lesion by one protein could facilitate loading of another by direct protein-protein or DNA mediated interactions.     

Parallel multiplex thermodynamic analysis of coaxial base stacking in DNA duplexes by oligodeoxyribonucleotide microchips

Parallel thermodynamic analysis of the coaxial stacking effect of two bases localized in one strand of DNA duplexes has been performed. Oligonucleotides were immobilized in an array of three-dimensional polyacrylamide gel pads of microchips (MAGIChips‘). The stacking effect was studied for all combinations of two bases and assessed by measuring the increase in melting temperature and in the free energy of duplexes formed by 5mers stacked to microchip-immobilized 10mers. For any given interface, the effect was studied for perfectly paired bases, as well as terminal mismatches, single base overlaps, single and double gaps, and modified terminal bases. Thermodynamic parameters of contiguous stacking determined by using microchips closely correlated with data obtained in solution. The extension of immobilized oligonucleotides with 5,6-dihydroxyuridine, a urea derivative of deoxyribose, or by phosphate, decreased the stacking effect moderately, while extension with FITC or Texas Red virtually eliminated stacking. The extension of the immobilized oligonucleotides with either acridine or 5-nitroindole increased stacking to mispaired bases and in some GC-rich interfaces. The measurements of stacking parameters were performed in different melting buffers. Although melting temperatures of AT- and GC-rich oligonucleotides in 5 M tetramethylammonium chloride were equalized, the energy of stacking interaction was significantly diminished.     

Hydrogen bonding versus stacking stabilization by modified nucleobases incorporated in PNA·DNA duplexes

The effects of incorporation of the modified nucleobases, 2,6-diaminopurine (D) (substituting for adenine) and 7-chloro-1,8-naphthyridin-2-(1H)-one (bicyclic thymine, bT) (substituting for thymine), that stabilize PNA·DNA duplex formation by increasing hydrogen bonding and/or base pair stacking interactions have been studied by thermal denaturation in terms of thermodynamics. Although the stabilizing effect of the bT base (in contrast to that of D base) is abolished upon addition of dimethyl formamide, thereby indicating that the stabilization is predominantly due to hydrophobic stacking forces, duplex stabilization was found to be enthalpic for both nucleobases. Increased stabilization (although not fully linearly) was observed with increasing numbers of modified bases, and single base sequence discrimination was only slightly compromised, but showed significant dependence on the sequence context.     

Direct transfer of extended groups from synthetic cofactors by DNA methyltransferases

S-Adenosyl-L-methionine (AdoMet) is the major methyl donor for biological methylation reactions catalyzed by methyltransferases. We report the first chemical synthesis of AdoMet analogs with extended carbon chains replacing the methyl group and their evaluation as cofactors for all three classes of DNA methyltransferases. Extended groups containing a double or triple bond in the beta position to the sulfonium center were transferred onto DNA in a catalytic and sequence-specific manner, demonstrating a high utility of such synthetic cofactors for targeted functionalization of biopolymers.     

Reaction potentials of the constituent bases of DNA and the effects of base stacking

Reaction potential maps (RPM's) around the constituent bases of DNA have been plotted using the CNDO/2 method. The maps were drawn to evaluate site selectivity in electrophilic attack on the bases of DNA as a function of two considerations: base sequence and the nature of the attacking reagent. It was found that base sequence does have a substantial effect on a site's reactivity and that a change in the nature of the attacking reagent can alter site selectivity of the electrophile. The former result was applied in a specific case to offer a plausible explanation for some results of a recent study of the mutagenic effects of arylating metabolites of nitrofluorenes in the Salmonella tester strains TA98 and TA97. These strains differ in the arrangement of guanine and cytosine residues at the mutational target ("hot spot"). The results also suggest that the "hot spot" for TA98, which consists of a run of alternating guanine and cytosine base pairs, does not exist in the Z-configuration.     

Role of base stacking and sequence context in the inhibition of yeast DNA polymerase eta by pyrene nucleotide

The Y family DNA polymerase yeast pol eta inserts pyrene deoxyribose monophosphate (dPMP) in preference to A opposite an abasic site, the 3'-T of a thymine dimer, and a normal T with almost equal efficiency. In contrast, pol A family polymerases such as Klenow fragment and T7 DNA polymerase only insert dPMP efficiently opposite an abasic site and the 3'-T of a thymine dimer but not opposite undamaged DNA. Pyrene nucleotide is also an efficient chain-terminating inhibitor of DNA synthesis by pol eta but not by Klenow fragment or T7 DNA polymerase. To better understand the origin of the efficiency and sequence specificity of dPMP insertion by pol eta, the kinetics of dPMP insertion opposite various templates have been determined. In one sequence context, the efficiency of dPMP insertion increases 4.6-fold opposite G < A < T < C, suggesting that the templating nucleotide modulates dPMP insertion efficiency by having to destack prior to dPTP binding. The efficiency of insertion of dPMP opposite T in the same sequence context increases 7-fold for primers terminating in G < A < C < T and is similar to that observed for nontemplated blunt-end extension, suggesting that stacking interactions between the pyrene and the primer terminus are also important. On heterogeneous templates, the average selectivity for dPMP insertion relative to the complementary dNMP decreases in the order of dAMP > dGMP > dTMP > dCMP, from a high of 5.8 when dAMP is to be inserted following a T to a low of 0.5 when dCMP is to be inserted following a C. The relative preference for dPMP insertion at a given site can be largely explained by the energetic cost of destacking the templating base and stacking of pyrene nucleotide relative to that of stacking and base pairing the complementary nucleotide. Thus, pyrene nucleotide represents a novel class of nucleotide-based chain-terminating DNA synthesis inhibitors whose base portion consists of a hydrophobic, non-hydrogen bonding, base-pair mimic.     

A-like guanine-guanine stacking in the aqueous DNA duplex of d(GGGGCCCC)

We have used CD spectroscopy, NMR spectroscopy and unrestrained molecular dynamics to study conformational properties of a DNA duplex formed by the self-complementary octamer d(GGGGCCCC). Its unusual CD spectrum contains features indicating A-like stacking of half of the bases, whereas the other half stack in a B-like fashion. Unrestrained molecular dynamics simulations converged to a stable B-like double-helix of d(GGGGCCCC). However, the double-helix contained a central hole whose size was half of that occurring in structure A. In the canonical structure B, the hole does not exist at all because the base-pairs cross the double-helix centre. The cytosine bases were stacked in the duplex of d(GGGGCCCC) as in structure B, while stacking of the guanine bases displayed features characteristic for structure A. NMR spectroscopy revealed that the A-like guanine-guanine stacking was accompanied by an increased tendency of the deoxyribose rings attached to the guanine bases to be puckered in an A-like fashion. Otherwise, the duplex of d(GGGGCCCC) showed no clash, no bend and no other significant deviation from structure B. The present analysis demonstrates a remarkable propensity of the guanine runs to stack in an A-like fashion even within the B-DNA framework. This property explains why the oligo(dG). oligo(dC) tracts switch into structure A so easily. Secondly, this property may influence replication, because structure A is replicated more faithfully than structure B. Thirdly, the oligo(dG) runs might have played an important role in early evolution, when DNA took on functions that originally evolved on RNA. Fourthly, the present study extends the vocabulary of DNA secondary structures by the heteronomous duplex of d(GGGGCCCC) in which the B-like strand of oligo(dC) is bound to the A-like strand of oligo(dG).     

Colored noise in the fluctuations of an extended DNA molecule detected by optical trapping

We studied fluctuations of an optically trapped bead connected to a single DNA molecule anchored between the bead and a cover glass or between two optically trapped beads. Power spectral densities of the bead position for different extensions of the molecule were compared with the power spectral density of the position fluctuations of the same bead without the molecule attached. Experiments showed that the fluctuations of the DNA molecule extended up to 80% by a force of 3 pN include the colored noise contribution with spectral dependence 1/f ^α with α ∼ 0.75.     

Thermodynamic analysis of stacking hybridization of oligonucleotides with DNA template.

Contiguous stacking hybridization of oligodeoxyribonucleotides with DNA as template was investigated using three types of complexes: oligonucleotide contiguously stacked with the stem of the preformed minihairpin (complexes I), oligonucleotide tandems containing two (complexes II) or three (complexes III) short oligomers with a common DNA template. Enthalpy Delta H degrees and entropy Delta S degrees of the coaxial stacking of adjacent duplexes were determined for GC/G*pC, GT/A*pC, AC/G*pT, AT/A*pT, CT/A*pG, AG/C*pT, AA/T*pT and TT/A*pA nicked (*) dinucleotide base pairs. The maximal efficiency of co-operative interaction was found for the GC/G*pC interface (Delta G degrees(NN/N*pN)=-2.7 kcal/mol) and the minimal one for the AA/T*pT interface (Delta G degrees(NN/N*pN)=-1.2 kcal/mol) at 37 degrees C. As a whole, the efficiency of the base pairs interaction Delta G degrees(NN/N*pN) in the nick is not lower than that within the intact DNA helix (Delta G degrees(NN/NN)).These observed Delta G degrees(NN/N*pN) values are proposed may include the effect of the partial removal of fraying at the adjacent helix ends additionally to the effect of the direct stacking of the terminal base pairs in the duplex junction (Delta G degrees(NN/NN). The thermodynamic parameters have been found to describe adequately the formation of all tandem complexes of the II and III types with oligonucleotides of various length and hybridization properties. The performed thermodynamic analysis reveals features of stacking oligonucleotide hybridization which allow one to predict the temperature dependence of association of oligonucleotides and the DNA template within tandem complexes as well as to determine optimal concentration for formation of these complexes characterized by high co-operativity level.     

DNA sequencing by hybridization to microchip octa-and decanucleotides extended by stacked pentanucleotides.

The efficiency of sequencing by hybridization to an oligonucleotide microchip grows with an increase in the number and in the length of the oligonucleotides; however, such increases raise enormously the complexity of the microchip and decrease the accuracy of hybridization. We have been developing the technique of contiguous stacking hybridization (CSH) to circumvent these shortcomings. Stacking interactions between adjacent bases of two oligonucleotides stabilize their contiguous duplex with DNA. The use of such stacking increases the effective length of microchip oligonucleotides, enhances sequencing accuracy and allows the sequencing of longer DNA. The effects of mismatches, base composition, length and other factors on the stacking are evaluated. Contiguous stacking hybridization of DNA with immobilized 8mers and one or two 5mers labeled with two different fluorescent dyes increases the effective length of sequencing oligonucleotides from 8 to 13 and 18 bases, respectively. The incorporation of all four bases or 5-nitroindole as a universal base into different positions of the 5mers permitted a decrease in the number of additional rounds of hybridization. Contiguous stacking hybridization appears to be a promising approach to significantly increasing the efficiency of sequencing by hybridization.     

A nonlinear dynamic model of DNA with a sequence-dependent stacking term

No simple model exists that accurately describes the melting behavior and breathing dynamics of double-stranded DNA as a function of nucleotide sequence. This is especially true for homogenous and periodic DNA sequences, which exhibit large deviations in melting temperature from predictions made by additive thermodynamic contributions. Currently, no method exists for analysis of the DNA breathing dynamics of repeats and of highly G/C- or A/T-rich regions, even though such sequences are widespread in vertebrate genomes. Here, we extend the nonlinear Peyrard–Bishop–Dauxois (PBD) model of DNA to include a sequence-dependent stacking term, resulting in a model that can accurately describe the melting behavior of homogenous and periodic sequences. We collect melting data for several DNA oligos, and apply Monte Carlo simulations to establish force constants for the 10 dinucleotide steps (CG, CA, GC, AT, AG, AA, AC, TA, GG, TC). The experiments and numerical simulations confirm that the GG/CC dinucleotide stacking is remarkably unstable, compared with the stacking in GC/CG and CG/GC dinucleotide steps. The extended PBD model will facilitate thermodynamic and dynamic simulations of important genomic regions such as CpG islands and disease-related repeats.     

Remarkable stabilization of antiparallel DNA triplexes by strong stacking effects of consecutively modified nucleobases containing thiocarbonyl groups

The consecutive arrangement of 2′-deoxy-6-thioguanosines (s⁶Gs) and 4-thiothymidines (s⁴Ts) in antiparallel triplex-forming oligonucleotides (TFOs) considerably stabilized the resulting antiparallel triplexes with high base recognition ability by the strong stacking effects of thiocarbonyl groups. This result was remarkable because chemical modifications of the sugar moieties and nucleobases of antiparallel TFOs generally destabilize triplex structures. Moreover, in comparison with unmodified TFOs, it was found that TFOs containing s⁶Gs and s⁴Ts could selectively bind to the complementary DNA duplex but not to mismatched DNA duplexes or single-stranded RNA.     

Rice chloroplast DNA molecules are heterogeneous as revealed by DNA sequences of a cluster of genes.

We describe the isolation of two rice chloroplast HindIII fragments (9.5 kb and 5.3 kb) each containing a gene cluster coding for the large subunit of ribulose-1,5-bisphosphate carboxylase (rbcL), beta and epsilon subunits of ATPase (atpB and atpE), tRNAmet (trnM) and tRNAval (trnV). All five genes contained in the 9.5 kb fragment are potentially functional, whereas in the 5.3 kb fragment, rbcL is truncated and atpB is frame-shift mutated. The copy number of the 9.5 kb fragment is 10 times that of the 5.3 kb fragment, indicating that the two fragments are probably located on different chloroplast genomes and represent two different (major and minor) genomic populations. Thus, the rice chloroplast genome appears to be heterogeneous, contrary to general belief. We also describe the isolation of a rice mitochondrial HindIII fragment (6.9 kb) which contains an almost complete transferred copy of this chloroplast gene cluster. In this transferred copy, the coding sequences of rbcL, atpE and trnM contain perfectly normal reading frames, whereas atpB has become grossly defective and trnV is truncated.