Complex-Formation of Ethidium Bromide with Poly[d(A-T)]·Poly[d(A-T)]

Abstract

The interaction of Ethidium Bromide (EtBr) with double-stranded (ds-) and single-stranded (ss-) poly[d(A-T)] was studied in different ionic strengths solutions. Optical spectroscopy and Scatchard analysis results indicate that the ligand interacts to both helix and coiled structures of the polynucleotide by “strong” and “weak” binding modes. The association parameters (binding constant—K—and the number of nucleotides corresponding to a binding site—n) of the strong type of interaction were found to be independent of Na+ concentration. Weak interaction occurs at low ionic strength and/or high EtBr concentration. Estimated binding parameters of EtBr with ss- and ds-polynucleotide are in good agreement with those for EtBr-B-DNA complexes. Data obtained provided an evidence for a stacking interaction of EtBr with single stranded poly[d(A-T)].     

A kinetic model for the B–Z transition of poly[d(G-C)]·poly[d(G-C)] and poly[d(G-m5C)]·poly[d(G-m5C)]

The analysis of the kinetic data of the B-Z conformational changes induced by salt in sized double-stranded poly[d(G-C)].poly[d(G-C)] and poly[d(G-m5C)].poly[d(G-m5C)] polymers indicated that there exists a salt threshold which reveals some largely, as yet, unrecognised characteristics of the transition. It was observed that there is a direct correlation between the length of the polymer and the rate of the B-Z transition when the salt concentration in the polymer solution is lower than the salt threshold. The correlation is inverse when the salt concentration is higher than the salt threshold. Thus, the molecular mechanism of the B- to Z-DNA transition varies depending on whether the salt concentration is higher or lower than the threshold. In this context, we have found that the contrasting results reported in the literature describing the rate of the B-Z transition are not contradictory but complementary. The finding of a salt threshold leads to the establishment of a relationship between the cooperativity index of the B-Z transition and the polymer chain length. That relationship is dependent on the chemical structure of the polymer but is temperature independent.     

Thermodynamics of B-Z Transition of Poly[d(G-C)] in a Water-Ethanol Solution. The “Tie Calorimetry”

Abstract

Poly[d(G-C)] in a 55% ethanol solution undergoes a transition from the Z form to the B form when the temperature is increased from 20° to 50°C. The enthalpy of the transition, ΔH_BA =—1.4 kcal/mol, has been determined with a “tie” polyamine which stabilizes the Z conformation. This value has been shown to be practically independent of ionic strength within the range of 5 x 10⁴ M—2 x 10³ M NaCl.     

Interactions of bis-[μ-chloro-chlorotricarbonylruthenium(II)] and poly-[μ-dichloro-dicarbonylruthenium(II)] with nucleosides

The interactions of dimeric complex bis-[μ-chloro-chlorotricarbonylruthenium(II)], [Ru(CO)₃Cl₂]₂, and the polymeric complex poly-[μ-dichlorodicarbonylruthenium(II)], [Ru(CO)₂Cl₂]_x, with nucleosides (Nucl) in a 1:1 Ru:Nucl molar ratio for the dimer and 1:2 Ru:Nucl for the polymer, resulted in formation of the monomeric mononucleoside [Ru(CO)₃(Nucl)Cl₂] and bis-nucleoside [Ru(CO)₂(Nucl)₂Cl₂] complexes, respectively. The dimer [Ru(CO)₃Cl₂]₂ also gave the ionic bis-nucleoside complexes [Ru(CO)₃(Nucl)₂Cl]Cl in the molar ratio 1:2 Ru:Nucl. The mononucleoside complexes are stable in solution while the bis-nucleoside complexes tend to lose one nucleoside in strong complexing solvents, probably by solvent substitution. The complexes [Ru(CO)₃(Nucl)Cl₂] and [Ru(CO)₂(Nucl)₂Cl₂] with one N(1)H ionizable imino proton undergo ionization in alkaline solution and the complexes [Ru(CO)₃(NuclH⁺)Cl] and [Ru(CO)₂(NuclH⁺)₂], respectively, were isolated. In these deprotonated complexes the nucleosides behave as bidentate ligands, while in the protonated ones they act as monodentate. All Complexes were characterized by elemental analyses and various spectroscopic methods.     

Structure of Poly (dT)·Poly (dA)·Poly (dT)

Abstract

The molecular structure of poly (dT)·poly (dA)·poly (dT) has been determined and refined using the continuous x-ray intensity data on layer lines in the diffraction pattern obtained from an oriented fiber of the DNA. The final R-value for the preferred structure is 0.29 significantly lower than that for plausible alternatives. The molecule forms a 12-fold right- handed triple-helix of pitch 38.4 Å and each base triplet is stabilized by a set of four Crick-Watson-Hoogsteen hydrogen bonds. The deoxyribose rings in all the three strands have C2′-endo conformations. The grooveless cylindrical shape of the triple-helix is consistent with the lack of lateral organization in the fiber.     

Structure of Poly(dA)·Poly(dT) is not Identical to the AT Rich Regions of the Single Crystal Structure of CGCGAATTBrCGCG. The Consequence of this to Netropsin Binding to Poly(dA)·Poly(dT)

Abstract

The basic assumption of Dickerson and Kopka (J. Biomole. Str. Dyns. 2, 423, 1985) that the conformation of poly(dA)·poly(dT) in solution is identical to the AT rich region of the single crystal structure of the Dickerson dodecamer is not supported by any experimental data. In poly(dA)·poly(dT), NOE and Raman studies indicate that the dA and dT units are conformationally equivalent and display the (anti-S-type sugar)-conformation; incorporation of this nucleotide geometry into a double helix leads to a conventional regular B-helix in which the width of the minor groove is 8A. The derived structure is consistent with all available experimental data on poly(dA)·poly(dT) obtained under solution conditions. In the crystal structure of the dodecamer, the dA and dT units have distinctly different conformations—dA residues adopt (anti, S-type sugar pucker), while dT residues belong to (low anti, N-type sugar pucker). These different conformations of the dA and dT units along with the large propeller twist can be accommodated in a double helix in which the minor groove is shrunk from 8A to less than 4A. In the conventional right handed B-form of poly(dA)·poly(dT) with the 8A wide minor groove, netropsin has to bind asymmetrically along the dA strand to account for the NOE and chemical shift data and to generate a stereochemically sound structure (Sarma et al, J. Biomole. Str. Dyns. 2, 1085, 1985).     

The mechanism of antimalarial action of the ruthenium(II)–chloroquine complex [RuCl2(CQ)]2

The mechanism of antimalarial action of the ruthenium-chloroquine complex [RuCl(2)(CQ)](2) (1), previously shown by us to be active in vitro against CQ-resistant strains of Plasmodium falciparum and in vivo against P. berghei, has been investigated. The complex is rapidly hydrolyzed in aqueous solution to [RuCl(OH(2))(3)(CQ)](2)[Cl](2), which is probably the active species. This compound binds to hematin in solution and inhibits aggregation to beta-hematin at pH approximately 5 to a slightly lower extent than chloroquine diphosphate; more importantly, the heme aggregation inhibition activity of complex 1 is significantly higher than that of CQ when measured at the interface of n-octanol-aqueous acetate buffer mixtures under acidic conditions modeling the food vacuole of the parasite. Partition coefficient measurements confirmed that complex 1 is considerably more lipophilic than CQ in n-octanol-water mixtures at pH approximately 5. This suggests that the principal target of complex 1 is the heme aggregation process, which has recently been reported to be fast and spontaneous at or near water-lipid interfaces. The enhanced antimalarial activity of complex 1 is thus probably due to a higher effective concentration of the drug at or near the interface compared with that of CQ, which accumulates strongly in the aqueous regions of the vacuole under those conditions. Furthermore, the activity of complex 1 against CQ-resistant strains of P. falciparum is probably related to its greater lipophilicity, in line with previous reports indicating a lowered ability of the mutated transmembrane transporter PfCRT to promote the efflux of highly lipophilic drugs. The metal complex also interacts with DNA by intercalation, to a comparable extent and in a similar manner to uncomplexed CQ and therefore DNA binding does not appear to be an important part of the mechanism of antimalarial action in this case.     

Interaction of a dimeric distamycin analog with poly(dA)poly(dT), poly[d(A–T)]poly[d(A–T)], and duplex O<Subscript>23</Subscript> at the origin of replication of the herpes simplex virus

The binding of a dimeric distamycin analog (Pt–bis–Dst) to poly[d(A–T)]poly[d(A–T)], poly(dA)poly(dT), and duplex O₂₃ with the sequence 5’-GCCAATATATATATATTATTAGG-3’, which occurs at the origin of replication (OriS) of the herpes simplex virus, was studied via UV and CD spectroscopy. The synthetic polyamide differs from the natural antibiotic in having two distamycin moieties that are linked via a glycine cis-diamino platinum group. The Pt–bis–Dst binding to poly[d(A–T)]poly[d(A–T)] and poly(dA)poly(dT) reached saturation at approximately one ligand molecule per eight bp. As the ligand–base pair ratio further increased, the maximum wavelength band tended to shift toward longer wavelengths in the CD spectra of complexes with poly[d(A–T)]poly[d(A–T)] and a shoulder appeared in the 290–310 nm spectral region that was absent from the CD spectra of complexes with lower ligand coverages. At higher ligand–oligonucleotide molar ratios, Pt–bis–Dst could bind to poly[d(A–T)]poly[d(A–T)] in the form of hairpins or associations that result from interactions between the distamycin moieties of two neighbor Pt–bis–Dst molecules. The structures of the complexes were stabilized by interactions between the pirrolcarboxamide moieties of two Pt–bis–Dst molecules absorbed on adjacent overlapping binding sites. The interactions could also be responsible for the concentration-dependent spectral changes that were observed during the formation of a complex between Pt–bis–Dst and poly[d(A–T)]poly[d(A–T)]. Spectral changes were almost absent in the case of Pt–bis–Dst binding to poly(dA)poly(dT). The binding of Pt–bis–Dst to duplex O₂₃ reached saturation at two ligand molecules per duplex, which contained a cluster of 18 AT pairs. At higher molar-concentration ratios, duplex CD spectra underwent changes similar to those that were observed for Pt–bis–Dst binding to poly[d(A–T)]poly[d(A–T)]. Testing Pt–bis–Dst for antiviral activity identified 1.5 μg/mL as a concentration that halved the cytopathic effect of the herpes simplex virus on Vero E6 cells; the selectivity index of antiviral action was 65; cytotoxicity was relatively low. The Pt–bis–Dst concentration that caused the death of approximately half of the cells was estimated at 100 μg/mL.     

Four- versus five-coordination in platinum(II) complexes of α-diimines and the crystal structure of [PtClMe(i-PrNCHCHNi-Pr)]

The complex [PtCIMe(i-PrNCHCHNi-Pr)] and its unstable five-coordinate ethylene adduct have been prepared and characterized by ¹H NMR. The crystal and molecular structure of the former has been determined. The complex crystallizes in the orthorhombic space group Pca2 ₁, with a = 12.138(6), b = 9.601(6), c = 10.586(6)Å, Z = 4. Refinement converged to a final R index of 0.059. The geometrical parameters of the structure are compared with those of a related complex and discussed in relation to the stability of the five-coordinate olefin adducts.     

Structures of the Laccase-catalyzed Oxidation Products of Hydroxy-benzoic Acids in the Presence of ABTS [2,2′-Azino-di-(3-ethylbenzothiazoline-6-sulfonic Acid)]

Esters selected from the combination of tricycloalkanecarboxylic acids and some representative pyrethroidal alcohols were prepared, and their insecticidal activities were measured by topical application on housefly, mosquito and German cockroach. Both the exo- and endo-isomers of 2,3-trimethylenenorbornane-2-carboxylic acid exhibited a high level of activity when esterified with m-phenoxymandelonitrile. Piperonyl butoxide showed a strong synergistic effect on some of the esters. Several structural resemblances were found among these active tricyclic acids and the chrysanthemummonocarboxylic acids, which were suggested to be related to insecticidal activity.     

The Complex of Poly(dG) · Poly(dC) with Arginine: Stabilization of the B Form and Transition to Multistranded Structures

Abstract

We have studied by X-ray diffraction fibers of complexes of poly(dG)·poly(dC) with N-α-acetyl-L-arginine ethylamide. Although these polynucleotides favour the A form of DNA, in this complex it is never found, thus confirming that arginine prevents the appearance of this form of DNA At high relative humidity the B form is present. Upon dehydration two new structures appear. One of them is a triple helix, most likely formed by poly(dC⁺) · poly(dG) · poly(dC). The other structure found also has features which indicate a multistranded conformation.     

Kinetics and mechanism of the reaction between the di-μ-cyanobis[tetracyanoferrate(III)] complex ion and sulfite in aqueous solution

The kinetics of the stepwise reduction of the title complex [Fe₂(CN)₁₀]⁴⁻ by sulfite have been studied in the presence of air as a function of pH, sulfite concentration, temperature and ionic strength using stopped-flow and conventional spectrophotometric techniques. The k_obs versus pH profile shows a marked increase in rate with increase of pH over the range 3.7 ? pH ? 6.1 due to the increase in concentration of the more reactive sulfite species . The reaction proceeds in several stages, the first of which involves a one electron transfer process with the formation of the radical anion This then adds on in a rapid stage to form a species . The second and third stages also involve one electron transfer. In the third, or possibly a fourth stage cleavage occurs, the final product being [Fe^II(CN)₅(SO₃)]⁵⁻. The reaction rate is sensitive to the nature of the cation present with a reactivity sequence .     

Dose Responsiveness and Variation Among Inbred Strains of Mice in Production of Interferon After Treatment with Poly (I)· Poly (C) [Poly-d-Lysine] Complexes

Poly-d-lysine forms a stochiometric complex with poly(I) . poly(C) which has a higher T(m) (83 C in 0.15 m NaCl) than the uncomplexed double-stranded polyribo-nucleotide (63 C). The complex was superior to poly(I) . poly(C) alone as an interferon inducer in vivo. Significant serum interferon titers were attained in Swiss mice during a 24-hr period after intraperitoneal injection of 10 to 300 mug of poly(I) . poly(C) [1.0 poly-d-lysine] complex, at concentrations of 100 to 1,000 mug/ml. The serum interferon responses (average and maximum titers) of a series of inbred strains of mice to a single intraperitoneal injection of 100 mug of complex decreased in the order: Swiss > DBA/2 > C3H > BALB/c > CF-1 > AKR, C57Bl/6, NZB > SJL > NZW and varied by a factor of approximately 100 from the most to the least responsive.     

The Structure of Triple Helical Poly(U)·Poly(A)·Poly(U) Studied by Raman Spectroscopy

Abstract

Using Raman spectroscopy, we examined the ribose-phosphate backbone conformation, the hydrogen bonding interactions, and the stacking of the bases of the poly(U)·poly(A) ·poly(U) triple helix. We compared the Raman spectra of poly(U)·poly(A)·poly(U) in H₂O and D₂O with those obtained for single-stranded poly(A) and poly(U) and for double-stranded poly(A)·poly(U). The presence of a Raman band at 863 cm^?1 indicated that the backbone conformations of the two poly(U) chains are different in the triple helix. The sugar conformation of the poly(U) chain held to the poly(A) by Watson-Crick base pairing is C3′ endo; that of the second poly(U) chain may be C2′ endo. Raman hypochromism of the bands associated with base vibrations demonstrated that uracil residues stack to the same extent in double helical poly(A)·poly(U) and in the triple-stranded structure. An increase in the Raman hypochromism of the bands associated with adenine bases indicated that the stacking of adenine residues is greater in the triple helix than in the double helical form. Our data further suggest that the environment of the carbonyls of the uracil residues is different for the different strands.     

A Mössbauer spectroscopic study of [phthalocyaninato tin(IV) tetracarbonyl iron(0)]

The action of Na₂Fe(CO)₄ and bis(chloro)phthalocyaninato tin(IV) yields phthalocyaninato tin(IV) tetracarbonyl iron(0). Mössbauer spectroscopic studies on the product indicate no change in formal oxidation state need be invoked to account for the formation of the metal-metal bond.