Cationic metals promote sequence-directed DNA bending

A DNA segment of approximately 200 base pairs (bp) from Crithidia fasciculata kinetoplast minicircles was previously shown by electron microscopy (EM) to bend into a small circle due to its unique nucleotide sequence containing repeated blocks of 4-6 A's. When this segment was flanked by 207 bp of plasmid DNA on one side and 460 bp on the other, the resulting 890-bp DNA was found to appear either relatively straight or extremely bent as visualized by EM. The bend was located one-third the distance from one end. The fraction of molecules with the most extreme bend increased from approximately 2% to 50-60% following incubation of the DNA with increasing concentrations of Zn2+, Co2+, Ba2+, and Mn2+. These observations suggest that sequence-directed bending in DNA is an inducible and not a static phenomenon. Possible roles of transitions between the bent and straight conformations in the control of gene expression are discussed.     

Construction and molecular dynamics simulation of calmodulin in the extended and in a bent conformation.

Analysis of sequence similarity and comparison of the three-dimensional (3D) structures of troponin C and calmodulin have revealed a sequence in the central helix of calmodulin with a high probability for bending. The three amino acids known to form a bend in the N-terminal portion of troponin C are also found in the central helix of calmodulin. The modelling of a bent calmodulin structure, using the dihedral angles of the three residues in the bend of troponin C as a 3D template, results in a conformation of calmodulin where the N- and C-terminal domains are able to form contacts. Dynamics simulations starting from the X-ray structure of calmodulin and from the modelled bent calmodulin were carried out to compare flexibility and correlated movements of Ca2+ in the binding loops. Both conformations of calmodulin remained stable during the period of simulation. In the simulation of calmodulin in the extended form, the motions of the Ca2+ atoms in the two domains (Ca2+1 and Ca2+2 in one domain, and Ca2+3 and Ca2+4 in the other) are correlated. In the simulation of the bent form, an additional correlation between the Ca atoms in the two different domains is observed. The results are compatible with the occurrence of a bent conformation of calmodulin in the presence of targets, and with increased Ca2+ affinity and cooperativity of the Ca(2+)-binding loops in the calmodulin-peptide complexes.     

HU binding to bent DNA: a fluorescence resonance energy transfer and anisotropy study

HU, an architectural DNA-binding protein, either stabilizes DNA in a bent conformation or induces a bend upon binding to give other proteins access to the DNA. In this study, HU binding affinity for a bent DNA sequence relative to a linear sequence was investigated using fluorescence anisotropy measurements. A static bend was achieved by the introduction of two phased A4T4 tracts in a 20 bp duplex. Binding affinity for 20 bp duplexes containing two phased A-tracts in either a 5'-3' or 3'-5' orientation was found to be almost 10-fold higher than HU binding to a random sequence 20 bp duplex (6.1 vs 0.68 microM(-1)). The fluorescence technique of resonance energy transfer was used to quantitatively determine the static bend of the DNA duplexes and the HU-induced bend. DNA molecules were 5'-end labeled with fluorescein as the donor or rhodamine as the acceptor. From the efficiency of energy transfer, the end-to-end distance of the DNA duplexes was calculated. The end-to-end distance relative to DNA contour length (R/R(C)) yields a bend angle for the A-tract duplex of 45 +/- 7 degrees in the absence of HU and 70 +/- 3 degrees in the presence of HU. The bend angle calculated for the T4A4 tract duplex was 62 +/- 4 degrees after binding two HU dimers. Fluorescence anisotropy measurements reveal that HU binds in a 1:1 stoichiometry to the A4T4 tract duplex but a 2:1 stoichiometry to the T4A4 tract and random sequence duplex. These findings suggest that HU binding and recognition of DNA may be governed by a structural mechanism.     

Hydroxyl radical footprints reveal novel structural features around the NF I binding site in adenovirus DNA.

We have identified a number of as yet unknown structural abnormalities of the NF I-DNA binding site within the inverted terminal repetition of adenovirus DNA by probing it with a hydroxyl radical footprinting technique. NF I binding alters the accessibility of the deoxyribose moieties to hydroxyl radicals both at the 3' and at the 5' side of the recognition sequence 5'-TGG(N)6GCCAA-3'. A smooth bend at the 5' side of the binding sequence is already present in naked linear DNA and it is further enhanced by protein binding. This could be demonstrated not only by hydroxyl radical footprinting but also by studying the temperature dependent mobility during gel electrophoresis of DNA fragments carrying the NF I binding site at circularly permutated positions. We propose that the bent conformation at this site is responsible for facilitating protein/DNA interactions.     

A-Tract bending: insights into experimental structures by computational models

While solution structures of adenine tract (A-tract) oligomers have indicated a unique bend direction equivalent to negative global roll (commonly termed "minor-groove bending"), crystallographic data have not unambiguously characterized the bend direction; nevertheless, many features are shared by all A-tract crystal and solution structures (e.g. propeller twisting, narrow minor grooves, and localized water spines). To examine the origin of bending and to relate findings to the crystallographic and solution data, we analyze molecular dynamics trajectories of two solvated A-tract dodecamers: 1D89, d(CGCGA(6)CG), and 1D98, d(CGCA(6)GCG), using a new general global bending framework for analyzing bent DNA and DNA/protein complexes. It is significant that the crystallographically-based initial structures are converted from dissimilar to similar bend directions equivalent to negative global roll, with the average helical-axis bend ranging from 10.5 degrees to 14.1 degrees. The largest bend occurs as positive roll of 12 degrees on the 5' side of the A-tracts (supporting a junction model) and is reinforced by gradual curvature at each A-tract base-pair (bp) step (supporting a wedge model). The precise magnitude of the bend is subtly sequence dependent (consistent with a curved general sequence model). The conversion to negative global roll only requires small local changes at each bp, accumulated over flexible moieties both outside and inside the A-tract. In contrast, the control sequence 1BNA, d(CGCGA(2)TTCGCG), bends marginally (only 6.9 degrees ) with no preferred direction. The molecular features that stabilize the bend direction in the A-tract dodecamers include propeller twisting of AT base-pairs, puckering differences between A and T deoxyriboses, a narrow minor groove, and a stable water spine (that extends slightly beyond the A-tract, with lifetimes approaching 0.2 ns). The sugar conformations, in particular, are proposed as important factors that support bent DNA. It is significant that all these curvature-stabilizing features are also observed in the crystallographic structures, but yield overall different bending paths, largely due to the effects of sequences outside the A-tract. These results merge structural details reported for A-tract structures by experiment and theory and lead to structural and dynamic insights into sequence-dependent DNA flexibility, as highlighted by the effect of an A-tract variant of a TATA-box element on bending and flexibility required for TBP binding.     

Sequence-dependent anisotropic flexibility of B-DNA. A conformational study

Bending flexibility of the six tetrameric duplexes was investigated d(AAAA):d(TTTT), d(AATT)2, d(TTAA)2, d(GGGG):d(CCCC), d(GGCC)2 and d(CCGG)2,. The tetramers were extended in the both directions by regular double helices. The stiffness of the B-DNA double helix when bent into the both grooves proved to be less than that in the perpendicular direction by an order of magnitude. Such an anisotropy is a property of the sugar-phosphate backbone structure. The calculated fluctuations of the DNA bending along the dyad axis, 5-7 degree, are in agreement with experimental value of the DNA persistence length. Anisotropy of the double helix is sequence-dependent: most easily bent into the minor groove are the tetramers with purine-pyrimidine dimer (RY) in the middle. In contrast, YR dinucleotides prefer bending into the major groove. Moreover, they have an equilibrium bend of 6-12 degree into this groove. The above inequality is caused by stacking interaction of the bases. The bend in the central dimer is distributed to some extent between the adjacent links, though the main fraction of the bend remains within the central link. Variation of the sugar-phosphate geometry in the bent helix is inessential, so that DNA remains within the B-family of forms: namely, when the helical axis is bent by 20 degree. the backbone dihedral angles vary by no more than 15 degree. The obtained results are in accord with x-ray structure of the B-DNA dodecamer; they further substantiate our early model of DNA wrapping in the nucleosome by means of "mini-kinks" separated by a half-pitch of the double helix, i.e. by 5-6 b.p. Sequence-dependent anisotropy of DNA presumably dictates the three-dimensional structure of DNA in solution as well. We have found that nonrandom allocation of YR dimers leads to the systematic bends in equilibrium structure of certain DNA fragments.     

Oxidation-sensitive residues mediate the DNA bending abilities of the architectural MC1 protein

The Methanosarcina thermophila MC1 protein is a small basic protein that is able to bend DNA sharply. When this protein is submitted to oxidative stress through gamma irradiation, it loses its original DNA interaction properties. The protein can still bind DNA but its ability to bend DNA is decreased dramatically. Here, we used different approaches to determine the oxidations that are responsible for this inactivation. Through a combination of proteolysis and mass spectrometry we have identified the three residues that are oxidized preferentially. We show by site directed mutagenesis that two of these residues, Trp74 and Met75, are involved in the DNA binding. Their substitution by alanine leads to a strong reduction in the protein capacity to bend DNA, and a total loss of its ability to recognize bent DNA. Taken together, these results show that oxidation of both these residues is responsible for the protein inactivation. Furthermore, the results confirm the strong relationship between DNA bending and recognition of DNA sequences by the MC1 protein.     

Anisotropic flexibility of DNA depends on the base sequence. Conformation calculations of double-stranded tetranucleotides AAAA:TTTT, (AATT)2, (TTAA)2, GGGG:CCCC, (GGCC)2, (CCGG)2

The bending flexibility of six tetramers was studied in an assumption that they were extended in the both directions by regular double helices. The bends of B-DNA in different directions were considered. The stiffness of the B-DNA double helix when bent into the both grooves proved to be less pronounced than in the perpendicular direction by the order of magnitude. Such an anisotropy is a feature of the sugar-phosphate backbone structure. The calculated fluctuations of the DNA bending along the dyad axis, 5-7 degrees, are in agreement with the experimental value of DNA persistence length. Anisotropy of the double helix is sequence-dependent: most easily bent into the minor groove are the tetramers with purine-pyrimidine dimer (RY) in the middle. In contrast, YR dinucleotides prefer bending into the major groove, moreover, they have an equilibrium bend of 6-12 degrees into this groove. The above inequality is caused by the stacking interaction of the bases. The bend in the central dimers is distributed to some extent between the adjacent links, though the main fraction of the bend remains within the central link. Variation of the sugar-phosphate geometry in the bent helix is unessential, so that DNA remains within the limits of the B-family of forms: namely, when the helical axis is bent by 20 degrees the backbone dihedral angles vary by no more than 15 degrees. The obtained results are in accord with the X-ray structure of B-DNA dodecamer; they further substantiate our earlier model of DNA wrapping in the nucleosome by means of "mini-kinks" separated by a half-pitch of the double helix, i.e. by 5-6 b. p. Sequence-dependent anisotropy of DNA presumably dictates the three-dimensional structure of DNA in solution as well. We have found that nonrandom allocation of YR dimers leads to the systematic bends in the equilibrium structure of certain DNA fragments. To the four "Calladine rules" two more can be added: the minor-groove steric clash of purines in the YR sequences are avoided by: (1) bending of the helix into the major groove; (2) increasing the distance between the base pairs (stretching the double helix).     

Bent DNA for gene regulation and DNA packaging

Recent work on kinetoplast DNA and on CAP-DNA and Eco RI-DNA complexes shows that certain sequences cause DNA to be highly bent, and that other sequences bend in response to the sequence-specific binding of proteins. These results demonstrate that alterations of DNA structure may facilitate gene regulation and DNA packaging.     

Sequence-Dependent Anisotropic Flexibility of B-DNA A Conformational Study

Abstract

Bending flexibility of the six tetrameric duplexes was investigated d(AAAA):d(TTTT), d(AATT)₂, d(TTAA) ₂, d(GGGG):d(CCCC), d(GGCC) ₂ and d(CCGG) ₂. The tetramers were extended in the both directions by regular double helices. The stiffness of the B-DNA double helix when bent into the both grooves proved to be less than that in the perpendicular direction by an order of magnitude. Such an anisotropy is a property of the sugar-phosphate backbone structure. The calculated fluctuations of the DNA bending along the dyad axis, 5–7°, are in agreement with experimental value of the DNA persistence length.

Anisotropy of the double helix is sequence-dependent: most easily bent into the minor groove are the tetramers with purine-pyrimidine dimer (RY) in the middle. In contrast, YR dinucleotides prefer bending into the major groove. Moreover, they have an equilibrium bend of 6–12° into this groove. The above inequality is caused by stacking interaction of the bases.

The bend in the central dimer is distributed to some extent between the adjacent links, though the main fraction of the bend remains within the central link. Variation of the sugar-phosphate geometry in the bent helix is inessential, so that DNA remains within the B-family of forms: namely, when the helical axis is bent by 20°, the backbone dihedral angles vary by no more than 15°.

The obtained results are in accord with x-ray structure of the B-DNA dodecamer; they further substantiate our early model of DNA wrapping in the nucleosome by means of “mini-kinks” separated by a half-pitch of the double helix, i.e. by 5–6 b.p. Sequence-dependent anisotropy of DNA presumably dictates the three-dimentional structure of DNA in solution as well. We have found that nonrandom allocation of YR dimers leads to the systematic bends in equilibrium structure of certain DNA fragments.     

Selective DNA bending by a variety of bZIP proteins.

We have investigated DNA bending by bZIP family proteins that can bind to the AP-1 site. DNA bending is widespread, although not universal, among members of this family. Different bZIP protein dimers induced distinct DNA bends. The DNA bend angles ranged from virtually 0 to greater than 40 degrees as measured by phasing analysis and were oriented toward both the major and the minor grooves at the center of the AP-1 site. The DNA bends induced by the various heterodimeric complexes suggested that each component of the complex induced an independent DNA bend as previously shown for Fos and Jun. The Fos-related proteins Fra1 and Fra2 bent DNA in the same orientation as Fos but induced smaller DNA bend angles. ATF2 also bent DNA toward the minor groove in heterodimers formed with Fos, Fra2, and Jun. CREB and ATF1, which favor binding to the CRE site, did not induce significant DNA bending. Zta, which is a divergent member of the bZIP family, bent DNA toward the major groove. A variety of DNA structures can therefore be induced at the AP-1 site through combinatorial interactions between different bZIP family proteins. This diversity of DNA structures may contribute to regulatory specificity among the plethora of proteins that can bind to the AP-1 site.     

Two mutations of basic residues within the N-terminus of HMG-1 B domain with different effects on DNA supercoiling and binding to bent DNA

High mobility group (HMG) 1 protein and its two homologous DNA-binding domains, A and B ("HMG-boxes"), can bend and supercoil DNA in the presence of topoisomerase I, as well as recognize differently bent and distorted DNA structures, including four-way DNA junctions, supercoiled DNA and DNA modified with anticancer drug cisplatin. Here we show that the lysine-rich part of the linker region between A and B domains of HMG-1, the (85)TKKKFKD(91) sequence that is attached to the N-terminus of the B domain within HMG-1, is a prerequisite for a preferential binding of the B domain to supercoiled DNA. The above sequence is also essential for a high-affinity binding of the B domain to DNA containing a site-specific major 1,2-d(GpG) intrastrand DNA adduct of cisplatin. Mutation of Arg(97), but not Lys(90) [Lys(90) forms a specific cross-link with platinum(II) in major groove of cisplatin-modified DNA; Kane, S. A., and Lippard, S. J. (1996) Biochemistry 35, 2180--2188], to alanine significantly (>40-fold) reduces affinity of the B domain to cisplatin-modified DNA, inhibits the ability of the B domain to bend (ligase-mediated circularization) or supercoil DNA, and results in a loss of the preferential binding of the B domain to supercoiled DNA without affecting the structural-specificity of the HMG-box for four-way DNA junctions. Some of the reported activities of the B domain are enhanced when the B domain is covalently linked to the A domain. We propose that binding of the A/B linker region within the major DNA groove helps the two HMG-1 domains to anchor to the minor DNA groove to facilitate their DNA binding and other activities.     

Characterization of a Transcriptional Activator Controlling Trichothecene Toxin Biosynthesis

Trichothecene biosynthetic pathway genes are localized within a gene cluster in Fusarium sporotrichioides and require the zinc-finger containing protein, TRI6, for expression. We show here that TRI6 is able to bind within the promoter regions of nine different pathway genes and that TRI6 binding is involved in pathway gene activation. TRI6 binding occurs at three distinct sites in the TRI5 promoter, all of which contain the sequence TNAGGCCT. DNA fragments from the promoter regions of six other pathway genes containing this sequence are also substrates for TRI6 binding. Specific nucleotide changes in the TNAGGCCT sequence dramatically reduced TRI6 binding. Analysis of TRI6 binding within the TRI3 and TRI11 promoters and the TRI4-TRI6 intergenic region which do not contain the TNAGGCCT motif suggests that the minimum sequence required for TRI6 binding is YNAGGCC. Two potential TRI6 binding sites, T4A and T4B, were identified within the intergenic region for the divergently transcribed TRI4 and TRI6 genes. Alteration or deletion of the T4A site resulted in the loss of nearly all in vitro TRI6 binding and was correlated with the loss of promoter activity in vivo as measured by the expression of mutant TRI4(p)/GUS fusions. This establishes a physiological role for TRI6 binding and demonstrates that TRI6 is directly involved in the regulation of pathway gene expression. To determine if a predicted Cys2His2 zinc-finger motif at the C-terminus of TRI6 is involved in DNA binding, a C187A mutant was constructed in TRI6 using site-directed mutagenesis. The C187A mutant did not bind promoter DNA fragments, supporting the role of C187 in DNA binding. In addition, a TRI6 homologue in the distantly related macrocyclic trichothecene pathway of Myrothecium roridum (MRTRI6) was also shown to bind to the same TRI5 and TRI4 promoter fragments bound by TRI6. Together, these data confirm our previous proposal that TRI6 is an activator of trichothecene pathway gene expression and that DNA binding employs the C-terminal region of TRI6 containing three predicted Cys2His2 zinc fingers.