Poly(DMAEMA-NVP)-b-PEG-galactose as gene delivery vector for hepatocytes

A block copolymer composed of cationic polymer and poly(ethylene glycol) (PEG) was used as a DNA carrier. Poly(2-(dimethylamino)ethyl methacrylate (DMAEMA)-co-N-vinyl-2-pyrrolidone (NVP)) having a terminal carboxylic group was synthesized by free radical polymerization using an initiator, 4,4'-azobis(4-cyanovaleric acid). The terminal carboxylic acid was activated by N-hydroxysuccinimide (NHS) with dicyclohexylcarbodiimide (DCC) and then conjugated with PEG-bis(amine). For specific gene targeting to asialoglycoprotein receptor of hepatocytes, a galactose moiety was incorporated into the PEG terminal end of poly(DMAEMA-NVP)-b-PEG by reductive coupling using lactose and sodium cyanoborohydride. RSV luciferase plasmid was used as a reporter gene, and in vitro gene transfection efficiency was measured in HepG2 human hepatocarcinoma cells. Poly(DMAEMA-NVP)-b-PEG-galactose/DNA complexes formed at 0.5-2 polymer/plasmid weight ratio had compacted structures around 200 nm particle size and exhibited slightly negative surface charge. These complexes were coated with a cationic, pH sensitive, endosomolytic peptide, KALA, to generate positively charged poly(DMAEMA-NVP)-b-PEG-galactose/DNA/KALA complex particles. In the presence of serum proteins, both the PEG block and the galactose moiety of poly(DMAEMA-NVP)-b-PEG-galactose greatly enhanced the gene transfection efficiency, which was very close to that of Lipofectamine plus. Irrespective of the presence of serum proteins, as the KALA/DNA weight ratio increased, the transfection efficiency of poly(DMAEMA-NVP)-b-PEG-galactose was enhanced due to the pH dependent endosomal disruptive property of KALA. This study demonstrates that sufficient transfection efficiency as high as that of commercial agent could be attained by judicious formulation of molecular engineered poly(DMAEMA-NVP)-b-PEG-galactose in combination with an endosomolytic peptide, KALA.     

Highly efficient gene transfer with degradable poly(ester amine) based on poly(ethylene glycol) diacrylate and polyethylenimine in vitro and in vivo

BACKGROUND: Polyethylenimine (PEI) is toxic although it is one of the most successful and widely used gene delivery polymers with the aid of the proton sponge effect. Therefore, development of new novel gene delivery carriers having high efficiency with less toxicity is necessary. METHODS: In this study, a degradable poly(ester amine) carrier based on poly(ethylene glycol) diacrylate (PEGDA) and low molecular weight linear PEI was prepared. Furthermore, we compared the gene expression of the polymer/DNA complexes using two delivery methods: intravenous administration as an invasive method and aerosol as a non-invasive method. RESULTS: The synthesized polymer had a relatively small molecular weight (MW = 7980) with 25 h half-life in vitro. The polymer/DNA complexes were formed at an N/P ratio of 9. The particle sizes and zeta-potentials of the complexes were dependent on N/P ratio. Compared to PEI 25K, the newly synthesized polymer exhibited high transfection efficiency with low toxicity. Poly(ester amine)-mediated gene expression in the lung and liver was higher than that of the conventional PEI carrier. Interestingly, non-invasive aerosol delivery induced higher gene expression in all organs compared to intravenous method in an in vivo mice study. Such an expressed gene via a single aerosol administration in the lung and liver remained unchanged for 7 days. CONCLUSIONS: Our study demonstrates that poly(ester amine) may be applied as an useful gene carrier.     

Degradable poly(amino alcohol esters) as potential DNA vectors with low cytotoxicity

The synthesis of a new degradable polymer system, poly(amino alcohol esters) and the resulting polymers' potential for use in gene transfection vectors are reported. The polymerization proceeded in a one step reaction from commercially available bis(secondary amines) monomers (N,N'-dimethyl-1,3-propanediamine and N,N'-dimethyl-1,6-hexanediamine, respectively) through nucleophilic addition to the diglycidyl ester of dicarboxylic acid (diglycidyl adipate). Poly(amino alcohol ester) 1 and 2 were synthesized with a yield of 89% and 91% with Mn = 24,800 and Mn = 36,400, respectively. Poly(amino alcohol ester) 1 degraded hydrolytically in phosphate buffer at pH 7.4 with a half-life of approximately 5 days. Both polymers readily self-assembled with plasmid DNA into nanometer-sized DNA/polymer complexes less than 180 nm diameter and are significantly less cytotoxic than the commonly used DNA delivery polymer, poly(ethylene imine) (PEI).     

Endosomal escape of polymeric gene delivery complexes is not always enhanced by polymers buffering at low pH

One of the crucial steps in gene delivery with cationic polymers is the escape of the polymer/DNA complexes ("polyplexes") from the endosome. A possible way to enhance endosomal escape is the use of cationic polymers with a pKa around or slightly below physiological pH ("proton sponge"). We synthesized a new polymer with two tertiary amine groups in each monomeric unit [poly(2-methyl-acrylic acid 2-[(2-(dimethylamino)-ethyl)-methyl-amino]-ethyl ester), abbreviated as pDAMA]. One pKa of the monomer is approximately 9, providing cationic charge at physiological pH, and thus DNA binding properties, the other is approximately 5 and provides endosomal buffering capacity. Using dynamic light scattering and zeta potential measurements, it was shown that pDAMA is able to condense DNA in small particles with a surface charge depending on the polymer/DNA ratio. pDAMA has a substantial lower toxicity than other polymeric transfectants, but in vitro, the transfection activity of the pDAMA-based polyplexes was very low. The addition of a membrane disruptive peptide to pDAMA-based polyplexes considerably increased the transfection efficiency without adversely affecting the cytotoxicity of the system. This indicates that the pDAMA-based polyplexes alone are not able to mediate escape from the endosomes via the proton sponge mechanism. Our observations imply that the proton sponge hypothesis is not generally applicable for polymers with buffering capacity at low pH and gives rise to a reconsideration of this hypothesis.     

Low molecular weight linear polyethylenimine-b-poly(ethylene glycol)-b-polyethylenimine triblock copolymers: synthesis, characterization, and in vitro gene transfer properties

Novel ABA triblock copolymers consisting of low molecular weight linear polyethylenimine (PEI) as the A block and poly(ethylene glycol) (PEG) as the B block were prepared and evaluated as polymeric transfectant. The cationic polymerization of 2-methyl-2-oxazoline (MeOZO) using PEG-bis(tosylate) as a macroinitiator followed by acid hydrolysis afforded linear PEI-PEG-PEI triblock copolymers with controlled compositions. Two copolymers, PEI-PEG-PEI 2100-3400-2100 and 4000-3400-4000, were synthesized. Both copolymers were shown to interact with and condense plasmid DNA effectively to give polymer/DNA complexes (polyplexes) of small sizes (<100 nm) and moderate zeta-potentials (approximately +10 mV) at polymer/plasmid weight ratios > or =1.5/1. These polyplexes were able to efficiently transfect COS-7 cells and primary bovine endothelial cells (BAECs) in vitro. For example, PEI-PEG-PEI 4000-3400-4000 based polyplexes showed a transfection efficiency comparable to polyplexes of branched PEI 25000. The transfection activity of polyplexes of PEI-PEG-PEI 4000-3400-4000 in BAECs using luciferase as a reporter gene was 3-fold higher than that for linear PEI 25000/DNA formulations. Importantly, the presence of serum in the transfection medium had no inhibitive effect on the transfection activity of the PEI-PEG-PEI polyplexes. These PEI-PEG-PEI triblock copolymers displayed also an improved safety profile in comparison with high molecular weight PEIs, since the cytotoxicity of the polyplex formulations was very low under conditions where high transgene expression was found. Therefore, linear PEI-PEG-PEI triblock copolymers are an attractive novel class of nonviral gene delivery systems.     

An acid-labile block copolymer of PDMAEMA and PEG as potential carrier for intelligent gene delivery systems

Intelligent gene delivery systems based on physiologically triggered reversible shielding technology have evinced enormous interest due to their potential in vivo applications. In the present work, an acid-labile block copolymer consisting of poly(ethylene glycol) and poly(2-(dimethylamino)ethyl methacrylate) segments connected through a cyclic ortho ester linkage (PEG- a-PDMAEMA) was synthesized by atom transfer radical polymerization of DMAEMA using a PEG macroinitiator with an acid-cleavable end group. PEG- a-PDMAEMA condensed with plasmid DNA formed polyplex nanoparticles with an acid-triggered reversible PEG shield. The pH-dependent shielding/deshielding effect of PEG chains on the polyplex particles were evaluated by zeta potential and size measurements. At pH 7.4, polyplexes generated from PEG- a-PDMAEMA exhibited smaller particle size, lower surface charge, reduced interaction with erythrocytes, and less cytotoxicity compared to PDMAEMA-derived polyplexes. At pH 5.0, zeta potential of polyplexes formed from PEG- a-PDMAEMA increased, leveled up after 2 h of incubation and gradual aggregation occurred in the presence of bovine serum albumin (BSA). In contrast, the stably shielded polyplexes formed by DNA and an acid-stable block copolymer, PEG- b-PDMAEMA, did not change in size and zeta potential in 6 h. In vitro transfection efficiency of the acid-labile copolymer greatly increased after 6 h incubation at pH 5.0, approaching the same level of PDMAEMA, whereas there was only slight increase in efficiency for the stable copolymer, PEG- b-PDMAEMA.     

Toll-like receptors as adjuvant receptors

Poly(ethylene glycol)-lipid (PEG-lipid) conjugates are widely used in the field of liposomal drug delivery to provide a polymer coat that can confer favorable pharmacokinetic characteristics on particles in the circulation. More recently these lipids have been employed as an essential component in the self-assembly of cationic and neutral lipids with polynucleic acids to form small, stable lipid/DNA complexes that exhibit long circulation times in vivo and accumulate at sites of disease. However, the presence of a steric barrier lipid might be expected to inhibit the transfection activity of lipid/DNA complexes by reducing particle-membrane contact. In this study we examine what effect varying the size of the hydrophobic anchor and hydrophilic head group of PEG-lipids has on both gene and antisense delivery into cells in culture. Lipid/DNA complexes were made using unilamellar vesicles composed of 5 mole% PEG-lipids in combination with equimolar dioleoylphosphatidylethanolamine and the cationic lipid dioleyldimethylammonium chloride. Using HeLa and HepG2 cells we show that under the conditions employed PEG-lipids had a minimal effect on the binding and subsequent endocytosis of lipid/DNA complexes but they severely inhibited active gene transfer and the endosomal release of antisense oligodeoxynucleotides into the cytoplasm. Decreasing the size of the hydrophobic anchor or the size of the grafted hydrophilic PEG moiety enhanced DNA transfer by the complexes.     

Characterization of the inhibitory effect of PEG-lipid conjugates on the intracellular delivery of plasmid and antisense DNA mediated by cationic lipid liposomes

Poly(ethylene glycol)-lipid (PEG-lipid) conjugates are widely used in the field of liposomal drug delivery to provide a polymer coat that can confer favorable pharmacokinetic characteristics on particles in the circulation. More recently these lipids have been employed as an essential component in the self-assembly of cationic and neutral lipids with polynucleic acids to form small, stable lipid/DNA complexes that exhibit long circulation times in vivo and accumulate at sites of disease. However, the presence of a steric barrier lipid might be expected to inhibit the transfection activity of lipid/DNA complexes by reducing particle-membrane contact. In this study we examine what effect varying the size of the hydrophobic anchor and hydrophilic head group of PEG-lipids has on both gene and antisense delivery into cells in culture. Lipid/DNA complexes were made using unilamellar vesicles composed of 5 mole% PEG-lipids in combination with equimolar dioleoylphosphatidylethanolamine and the cationic lipid dioleyldimethylammonium chloride. Using HeLa and HepG2 cells we show that under the conditions employed PEG-lipids had a minimal effect on the binding and subsequent endocytosis of lipid/DNA complexes but they severely inhibited active gene transfer and the endosomal release of antisense oligodeoxynucleotides into the cytoplasm. Decreasing the size of the hydrophobic anchor or the size of the grafted hydrophilic PEG moiety enhanced DNA transfer by the complexes.     

Development of a nonviral gene delivery vehicle for systemic application

Polycation vehicles used for in vitro gene delivery require alteration for successful application in vivo. Modification of polycations by direct grafting of additional components, e.g., poly(ethylene glycol) (PEG), either before or after DNA complexation, tend to interfere with polymer/DNA binding interactions; this is a particular problem for short polycations such as linear, beta-cyclodextrin-containing polycations (betaCDPs). Here, a new method of betaCDP polyplex (polycation/DNA composite structures) modification is presented that exploits the ability to form inclusion complexes between cyclodextrins and adamantane. Surface-PEGylated betaCDP polyplexes are formed by self-assembly of the polyplexes with adamantane-PEG conjugates. While unmodified polyplexes rapidly aggregate and precipitate in salt solutions, the PEGylated betaCDP polyplexes are stable at conditions of physiological salt concentration. Addition of targeting ligands to the adamantane-PEG conjugates allows for receptor-mediated delivery; galactosylated betaCDP-based particles reveal selective targeting to hepatocytes via the asialoglycoprotein receptor. Galactosylated particles transfect hepatoma cells with 10-fold higher efficiency than glucosylated particles (control), but show no preferential transfection in a cell line lacking the asialoglycoprotein receptor. Thus, surface modification of betaCDP-based polyplexes through the use of cyclodextrin/adamantane host/guest interactions endows the particles with properties appropriate for systemic application.     

Novel shielded transferrin-polyethylene glycol-polyethylenimine/DNA complexes for systemic tumor-targeted gene transfer

Tumor-targeting DNA complexes which can readily be generated by the mixing of stable components and freeze-thawed would be very advantageous for their subsequent application as medical products. Complexes were generated by the mixing of plasmid DNA, linear polyethylenimine (PEI22, 22 kDa) as the main DNA condensing agent, PEG-PEI (poly(ethylene glycol)-conjugated PEI) for surface shielding, and Tf-PEG-PEI (transferrin-PEG-PEI) to provide a ligand for receptor-mediated cell uptake. Within the shielding conjugates, PEG chains of varying size (5, 20, or 40 kDa) were conjugated with either linear PEI22 (22 kDa) or branched PEI25 (25 kDa). The three polymer components were mixed together at various ratios with DNA; particle size, surface charge, in vitro transfection activity, and systemic gene delivery to tumors was investigated. In general, increasing the proportion of shielding conjugate in the complex reduced surface charge, particle size, and in vitro transfection efficiency in transferrin receptor-rich K562 cells. The particle size or surface charge of the complexes containing the PEG-PEI conjugate did not significantly change after freeze-thawing, while complexes without the shielding conjugate aggregated. Complexes containing PEG-PEI conjugate efficiently transfected K562 cells after freeze-thawing. Furthermore the systemic application of freeze-thawed complexes exhibited in vivo tumor targeted expression. For complexes containing the luciferase reporter gene the highest expression was found in tumor tissue of mice. An optimum formulation for in vivo application, PEI22/Tf-PEG-PEI/PEI22-PEG5, containing plasmid DNA encoding for the tumor necrosis factor (TNF-alpha), inhibited tumor growth in three different murine tumor models. These new DNA complexes offer simplicity and convenience, with tumor targeting activity in vivo after freeze-thawing.     

Synthesis and characterization of the novel transfection reagent poly(amino ester glycol urethane)

Poly(ester urethane) (PEU) is a class of biodegradable polymer that has been applied as tissue-engineering scaffolds with minimum toxicity. Despite its unique biocompatibility, there have been no reports in modifying the PEU backbone to design a soluble, PEU-based DNA carrier. We have developed a method of incorporating tertiary amines and poly(ethylene glycol) (PEG) into PEU to synthesize a soluble poly(amino ester glycol urethane) (PaEGU) as a novel transfection reagent. Parallel to this, we have synthesized poly(amino ester) (PaE) and poly(amino ester urethane) (PaEU) as the control polymers. The test transfection reagent PaEGU and the control PaE were similar in their properties of being soluble and buffering pH in water and their capabilities of self-assembling with DNA and transfecting the target cells. Significantly, PaEGU exhibited faster hydrolysis kinetics than PaE, half-lives of 19 and 36 h for PaEGU and PaE, respectively, underlying PaEGU's unique property of low cytotoxicity. However, in comparison to PaEGU, the other control polymer, PaEU, was not readily dissolved in water, indicating the importance of PEG units in PaEGU in increasing polymer hydrophilicity. This study demonstrated a useful synthesis scheme for the PEU-based transfection reagent PaEGU. The combination of tertiary amine, ester, PEG, and urethane units in the polymer backbone constitutes a feasible approach for the future design of low-toxicity gene transfer vectors.     

Effects of the incorporation of a hydrophobic middle block into a PEG-polycation diblock copolymer on the physicochemical and cell interaction properties of the polymer-DNA complexes

One-component homopolymers of cationic monomers (polycations) and diblock copolymers comprising poly(ethylene glycol) (PEG) and a polycation block have been the most widely used types of polymers for the formulation of polymer-based gene delivery systems. In this study, we incorporate a hydrophobic middle block into the conventional PEG-polycation architecture and investigate the effects of this hydrophobic modification on the physicochemical and cell-level biological properties of the polymer-DNA complexes that are relevant to gene delivery applications. The ABC-type triblock copolymer used in this study consists of (A) PEG, (B) hydrophobic poly( n-butyl acrylate) (PnBA), and (C) cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) component polymers. The properties of the triblock copolymer/DNA complexes are compared with those of two other more conventional DNA carriers derived, respectively, using a PDMAEMA homopolymer and a PEG-PDMAEMA diblock copolymer that had comparable molecular weights for individual blocks. In aqueous solution, the PEG-PnBA-PDMAEMA polymer forms positively charged spherical micelles. The electrostatic complexation of these micelles with plasmid DNA molecules results in the formation of stable small-sized DNA particles that are coated with a micelle monolayer, as confirmed by agarose gel electrophoresis, dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM). Proton nuclear magnetic resonance ( (1)H NMR) spectroscopy measurements indicate that the whole micelle-DNA assembly (named "micelleplex" for convenience) is shielded predominantly by the PEG chains. DLS and optical microscopy imaging measurements indicate that compared with PDMAEMA-DNA polyplexes, the micelleplexes have a significantly lower tendency to aggregate under physiological salt concentrations and show reduced interactions with negatively charged components in serum such as albumin and erythrocytes. While the micelleplexes are comparable to the PEG-PDMAEMA-based DNA polyplexes in terms of their stability against aggregation under high salt concentrations and in the presence of the albumin protein, they have a slightly higher tendency to interact with erythrocytes than the diblock copolymer polyplexes. Agarose gel electrophoresis measurements indicate that relative to the PEG-PDMAEMA polyplexes, the micelleplexes provide better protection of the encapsulated DNA from enzymatic degradation and also exhibit greater stability against disintegration induced by polyanionic additives; in these respects, the PDMAEMA homopolymer-based polyplexes show the best performance. In vitro studies in HeLa cells indicate that the PDMAEMA polyplexes show the highest gene transfection efficiency among the three different gene delivery systems. Between the micelleplexes and the PEG-PDMAEMA polyplexes, a higher gene transfection efficiency is observed with the latter system. All three formulations show comparable levels of cytotoxicity in HeLa cells.     

Development of novel poly(ethylene glycol)-based vehicles for gene delivery

The purpose of this research was to develop and characterize a gene delivery vehicle with a poly(ethylene glycol) (PEG) backbone with the aim of overcoming limitations, such as cytotoxicity and rapid clearance, associated with current commonly used non-viral carriers. PEG was functionalized with DNA-binding peptides (DBPs) to make a vehicle (DBP-PEG) capable of condensing DNA. Complexes of plasmid DNA and DBP-PEG were formed and characterized by measuring particle size, zeta potential, and transfection efficiency as a function of N:P charge ratios (DBP-PEG amino groups:DNA phosphate). Dynamic light scattering showed that DBP-PEG was able to condense DNA efficiently resulting in a population of particles in the range of 250-300 nm. Neutral or slightly positive zeta potentials were measured for charge ratios of 3.5:1 and greater. DBP-PEG/DNA complexes, made with plasmids encoding the green fluorescent protein (GFP) and beta-Galactosidase (beta-Gal) genes, were used to transfect Chinese hamster ovary (CHO) cells. DBP-PEG/DNA was capable of transfecting cells and maximum transfection efficiency was observed for N:P ratios from 4:1 to 5:1, corresponding to zeta potentials from -4 to +1.6 mV. The effect of the DBP-PEG vehicle on cell viability was assayed. DBP-PEG was associated with a higher percentage of viable cells ( approximately 95%) than either polyethylenimine (PEI) or poly-L-lysine (PLL), and with transfection efficiency greater than PLL, but with somewhat lower than PEI. The results of this work demonstrate that PEG can be used as the backbone for gene delivery vehicles.     

Synthesis and characterization of folate-PEG-grafted-hyperbranched-PEI for tumor-targeted gene delivery

A great challenge for gene therapy is to develop a high efficient gene delivery system with low toxicity. Nonviral vectors are still attractive although the current agents displayed some disadvantages (i.e., low transfection efficiency, high toxicity). To overcome the high toxicity of poly(ethylene imine) (PEI) and low transfection efficiency of PEGylated PEI (PEG-PEI), we linked a cell specific target molecule folate (FA) on poly(ethylene glycol) (PEG) and then grafted the FA-PEG onto hyperbranched PEI 25 kDa. The FA-PEG- grafted-hyperbranched-PEI (FA-PEG-PEI) effectively condensed plasmid DNA (pDNA) into nanoparticles with positive surface charge under a suitable N/P ratio. Tested in deferent cell lines (i.e., HEK 293T, glioma C6 and hepatoma HepG2 cells), no significant cytotoxicity of FA-PEG-PEI was added to PEG-PEI. More importantly, significant transfection efficiency was exhibited in FA-targeted cells. Reporter assay showed that FA-PEG-PEI/pDNA complexes had significantly higher transgene activity than that of PEI/pDNA in folate-receptor (FR) positive (HEK 293T and C6) cells but not FR-negative (HepG2) cells. These results indicated that FA-PEG-PEI might be a promising candidate for gene delivery with the characteristics of good biocompatibility, potential biodegradability, and relatively high gene transfection efficiency.     

Development of multicomponent DNA delivery systems based upon poly(amidoamine)-PEG co-polymers

PEGylated polyamidoamine (PAA) polymers were investigated for the production of sterically stabilised DNA delivery systems. Comparison of a PEGylated polymer (NG47) with a non-PEGylated polymer (NG49) showed similar binding of co-polymer to DNA by displacement of ethidium bromide (EB) and DNA melting studies. Gel electrophoresis, turbidimetric analysis and PCS demonstrated differences in the colloidal properties of the complexes, which were attributable to the formation of soluble complexes by the PEGylated co-polymer. However, transmission electron microscopy (TEM) showed that the resulting complexes containing poly(ethylene glycol) (PEG) were not well condensed, susceptible to degradation by nucleases, and thus not suited for in vivo delivery. The poor properties of the PEGylated co-polymer were attributed to an excess of PEG. However, polymer blends of NG47 and NG49 at defined ratios of polymer to co-polymer and total repeating units (RUs) to nucleotide, spontaneously formed complexes with a range of desirable properties. These included small size and polydispersity, high particle density, low surface charge and resistance to nuclease degradation. Complexes made with PEGylated polymer alone, and the polymer blends both suffered from a reduced polyfection activity. This was attributed to a low surface charge on the complex, which reduced interactions with the cell membrane and consequent uptake of the particles into the cell.     

Structure-activity relationships of water-soluble cationic methacrylate/methacrylamide polymers for nonviral gene delivery.

A number of water-soluble cationic carriers was evaluated as transfectant. Almost all studied cationic methacrylate/methacrylamide polymers were able to condense the structure of plasmid DNA, yielding polymer/plasmid complexes (polyplexes) with a size of 0.1-0.3 micron and a slightly positive zeta-potential, which can be taken up by cells, e.g., via endocytosis. However, the transfection efficiency and the cytotoxicity of the polymers differed widely: the highest transfection efficiency and cytotoxicity were observed for poly[2-(dimethylamino)ethyl methacrylate], p(DMAEMA). Assuming that polyplexes enter cells via endocytosis, p(DMAEMA) apparently has advantageous properties to escape the endosome. A possible explanation is that, due to its average pK(a) value of 7.5, p(DMAEMA) is partially protonated at physiological pH and might behave as a proton sponge. This might cause a disruption of the endosome, which results in the release of both the polyplexes and cytotoxic endosomal/lysosomal enzymes into the cytosol. On the other hand, the analogues of p(DMAEMA) studied here have a higher average pKa value and have, consequently, a higher degree of protonation and a lower buffering capacity. This might be associated with a lower tendency to destabilize the endosome, resulting in both a lower transfection efficiency and a lower cytotoxicity. Furthermore, molecular modeling showed that, of all studied polymers, p(DMAEMA) has the lowest number of interactions with DNA. We therefore hypothesized that the superior transfection efficiency of p(DMAEMA) containing polyplexes can be ascribed to an intrinsic property of p(DMAEMA) to destabilize endosomes combined with an easy dissociation of the polyplex once present in the cytosol and/or the nucleus.     

Ternary complexes comprising polyphosphoramidate gene carriers with different types of charge groups improve transfection efficiency

To understand the influence of charge groups on transfection mediated by polymer complexes, we have synthesized a series of biodegradable and cationic polyphosphoramidates (PPAs) with an identical backbone but different side chains. Our previous study showed that PPA with a spermidine side chain (PPA-SP) showed high transfection efficiency in culture, whereas PPAs with secondary, tertiary, and quaternary amino groups were significantly less efficient. To investigate whether the coexistence of 1 degrees amino charge groups with 3 degrees and 2 degrees amino charge groups in the DNA/polymer complexes would enhance their transfection efficiency, we evaluated a ternary complex system containing DNA and PPAs with 1 degrees amino groups (PPA-SP) and 3 degrees amino groups (PPA-DMA) and a quaternary complex system containing DNA and PPAs with 1 degrees and 2 degrees and 3 degrees amino groups (PPA-EA/PPA-MEA/PPA-DMA), respectively. Ternary complexes mediated 20 and 160 times higher transfection efficiency in COS-7 cells than complexes of DNA with PPA-SP or PPA-DMA alone, respectively. Similarly, quaternary complexes exhibited 8-fold higher transfection efficiency than PPA-EA/DNA complexes. The mechanism of enhancement in transfection efficiency by the mixture carriers appears to be unrelated to the particle size, zeta potential, or DNA uptake. The titration characterization and the transfection experiments using a proton pump inhibitor suggest that the enhancement effect is unlikely due to the slightly improved buffering capacity of the mixture over PPA-SP. This approach represents a simple strategy of developing polymeric gene carriers and understanding the mechanisms of polymer-mediated gene transfer.     

RGD conjugation to polyethyleneimine does not improve DNA delivery to bone marrow stromal cells

Bone marrow stromal cells (BMSC) modified with therapeutic genes are being actively pursued for gene therapy protocols. To develop safe and effective nonviral methods for BMSC modification, the cationic polymer polyethyleneimine (PEI) has been utilized to condense plasmid DNA for intracellular delivery. This study was conducted to explore the feasibility of increasing the PEI's effectiveness by coupling integrin-binding arginine-glycine-aspartic acid (RGD) peptides to the polymer. BMSC from rats were isolated and expanded in culture for gene transfer studies. In contrast to our expectations, RGD-conjugated PEI did not exhibit an enhanced binding to BMSC. This was the case where the peptides were conjugated to PEI by short, disulfide linkages or long poly(ethylene glycol) linkages. Using a reporter gene for the enhanced green fluorescent protein, the transfection efficiency of RGD-conjugated PEI was also lower than the delivery by the native PEI, which exhibited equivalent transfection efficiency to that of an adenovirus. We conclude that native PEI was sufficient for the transformation of BMSC and that coupling of the integrin-binding RGD-peptides did not improve the effectiveness of this polymer for BMSC transfection.     

Linear polyethyleneimine grafted to a hyperbranched poly(ethylene glycol)-like core: a copolymer for gene delivery

A block copolymer of a hyperbranched poly(ethylene glycol)-like core and linear polyethylenimine (HBP) was synthesized by a facile synthetic route that included (1) a single-step cationic copolymerization of diepoxy and polyhydroxyl monomers, (2) derivatization of hydroxyl groups of the core HBPEG copolymer with either tosyl or chloromethylbenzoyl chlorides resulting in a corresponding macroinitiator, and (3) synthesis of HBPEG-block-poly(alkyl oxazolines). HBPEG-block-linear polyethyleneimine (HBP) was obtained by hydrolysis of HBPEG-block-poly(alkyl oxazolines). Linear PEI-bearing hyperbranched polycations (HBP) had lower inherent toxicity in cell culture than PEG-grafted linear polyethyleneimines (PEGLPEI). PEGLPEI formed a complex with DNA with an average diameter of 250 nm. The complexes were loosely condensed and formed aggregates and precipitates during storage. By contrast, hyperbranched polycations (HBP) formed approximately 50 nm nanocomplexes with DNA that were stable for several weeks and showed resistance to DNAse I-mediated degradation. The 'inverted' block copolymers showed several orders of magnitude higher transfection efficiency than PEGLPEI in vitro. Because of the biocompatibility and higher transfection efficiency, the 'inverted' block copolymer merits further investigation as a gene carrier.