Light meromyosin paracrystal formation

Studies of paracrystal formation by column purified light meromyosin (LMM) prepared in a variety of ways led to the following conclusions: (a) different portions of the myosin rod may be coded for different stagger relationships. This was concluded from observations that paracrystals with different axial repeat periodicities could be obtained either with LMM framents of different lengths prepared with the same enzyme, or with LMM fragments of identical lengths but prepared with different enzymes. (b) Paracrystals with a 14-nm axial repeat periodicity are most likely formed by the aggregation of sheets with a 44-nm axial repeat within the sheets which are staggered by 14 nm. All of the axial repeat patterns expected from one sheet or aggregates of more than one sheet, on this basis, were observed in the same electron micrograph. (c) C-protein binding probably occurs preferentially to LMM molecules related in some specific way. This was concluded from the observation that the same axial repeat pattern was obtained in paracrystals formed from different LMM preparations in the presence of C-protein, regardless of differences in the axial repeat obtained in the absence of C-protein. (d) Nucleic acid is responsible for the 43-nm axial repeat patterns observed in paracrystals formed by the ethanol-resistant fraction of LMM. In the absence of nuclei acid, paracrystals with a 14nm axial repeat are obtained. (e) The 43-nm axial repeat pattern observed with the ethanol-resistant fraction of LMM is different for LMM preparations obtained by trypsin and papain digestions.     

The axial repeats in paracrystals of light meromyosin and its complex with C-protein

We examined the axial repeats in electron micrographs of three types of negatively stained paracrystals (two tactoid- and one sheet-like type) of rabbit light meromyosin (LMM) and its complex with C-protein characterized previously by similar axial period of about 43.0 nm. Assuming for the axial repeat in type II tactoids the value of 42.93 +/- 0.05 nm as it was determined by X-ray diffraction technique (Yagi and Offer 1981), we found average axial repeats in type I tactoid and in sheet-like paracrystal of 42.93 +/- 0.75 nm and 43.50 +/- 0.62 nm respectively. Analyzing the micrographs where the two types paracrystals are located side-by-side we determined rather accurately the average ratio of axial repeat in sheet-like paracrystal to that in type I tactoid (1.013 +/- 0.002). Taking 42.93 nm as the axial repeat in type I tactoid, the axial repeat in sheet-like paracrystal was found to be 43.50 +/- 0.08 nm. C-protein binds to LMM with the period of the underlying LMM paracrystals and independently of the value of their axial repeats. Two different axial repeats (42.9 nm and 43.5 nm) revealed for LMM paracrystals in this study precisely coincide with the average repeat periods of myosin crossbridges along the thick filaments found for different physiological states of skeletal muscles (Lednev and Kornev 1987). Molecular basis for the appearance of two structural states in LMM paracrystals and in the shafts of thick filaments are discussed.     

Effect of H-protein on the formation of myosin filaments and light meromyosin paracrystals

H-protein is a component of the thick filaments of skeletal myofibrils. Its effects on the assembly of myosin into filaments and on the formation of light meromyosin (LMM) paracrystals at low ionic strength have been investigated. H-protein reduced the turbidities of myosin filament and LMM paracrystal suspensions. Electron microscopic observation showed that the appearances of the filaments prepared in the presence and absence of H-protein were different. The filament length was not substantially changed by H-protein, but the diameter of the myosin filament was markedly reduced. H-protein bound to LMM and co-sedimented with it at low ionic strength upon centrifugation. Two types of paracrystals, spindle-shaped and sheet-like, were observed in LMM suspensions. H-protein altered the structure of the LMM paracrystals, especially the spindle-shaped ones. The thickness of the spindle-shaped paracrystals was reduced when H-protein was present during LMM paracrystal formation. On the other hand, periodic features along the long axis of the sheet-like paracrystals were retained even at high ratios of H-protein to LMM. However, there were fewer sheet-like paracrystals in the LMM suspensions containing H-protein than in the control. These results suggest that H-protein interferes with self-association of myosin molecule into filaments due to its binding to the tail portion of the myosin. However, H-protein does not have a length-determining effect on the formation of myosin filaments.     

Order-disorder structural transitions in synthetic filaments of fast and slow skeletal muscle myosins under relaxing and activating conditions

In the previous study (Podlubnaya et al., 1999, J. Struc. Biol. 127, 1-15) Ca2+-induced reversible structural transitions in synthetic filaments of pure fast skeletal and cardiac muscle myosins were observed under rigor conditions (-Ca2+/+Ca2+). In the present work these studies have been extended to new more order-producing conditions (presence of ATP in the absence of Ca2+) aimed at arresting the relaxed structure in synthetic filaments of both fast and slow skeletal muscle myosin. Filaments were formed from column-purified myosins (rabbit fast skeletal muscle and rabbit slow skeletal semimebranosusproprius muscle). In the presence of 0.1 mM free Ca2+, 3 mM Mg2+ and 2 mM ATP (activating conditions) these filaments had a spread structure with a random arrangement of myosin heads and subfragments 2 protruding from the filament backbone. Such a structure is indistinguishable from the filament structures observed previously for fast skeletal, cardiac (see reference cited above) and smooth (Podlubnaya et al., 1999, J. Muscle Res. Cell Motil. 20, 547-554) muscle myosins in the presence of 0.1 mM free Ca2+. In the absence of Ca2+ and in the presence of ATP (relaxing conditions) the filaments of both studied myosins revealed a compact ordered structure. The fast skeletal muscle myosin filaments exhibited an axial periodicity of about 14.5 nm and which was much more pronounced than under rigor conditions in the absence of Ca2+ (see the first reference cited). The slow skeletal muscle myosin filaments differ slightly in their appearance from those of fast muscle as they exhibit mainly an axial repeat of about 43 nm while the 14.5 nm repeat is visible only in some regions. This may be a result of a slightly different structural properties of slow skeletal muscle myosin. We conclude that, like other filaments of vertebrate myosins, slow skeletal muscle myosin filaments also undergo the Ca2+-induced structural order-disorder transitions. It is very likely that all vertebrate muscle myosins possess such a property.     

The myosin filament. XIII. The sensitivity of LMM assembly to Mg.ATP

An LMM fragment (Mr 62,000) of myosin has been prepared which has aggregation properties that are sensitive to the presence of Mg.ATP. Aggregation of the LMM by reducing the ionic strength in the presence of 1 mM Mg.ATP produces non-periodic aggregates which gradually rearrange to paracrystals with a 43 nm axial repeat pattern. This fragment includes the C-terminal end of the myosin rod starting at residue 1376. Therefore, at least one of the Mg.ATP binding sites responsible for this effect is located somewhere along this region of the myosin rod. Although assembly of the rod fragment of myosin into paracrystals does not show sensitivity to Mg.ATP, assembly of intact myosin molecules to form filaments does show sensitivity to Mg.ATP. For myosin filaments, assembly initially gives a broad distribution around a mean length of 1.5 microns, which sharpens around the mean length with time. The rearrangement of the LMM rods and intact myosin molecules both induced by the presence of Mg.ATP are probably related. These findings highlight the complexity of the cooperative interactions between different portions of the myosin molecule that are involved in determining the assembly properties of the intact molecule.     

Axial arrangement of the myosin rod in vertebrate thick filaments: immunoelectron microscopy with a monoclonal antibody to light meromyosin

A monoclonal antibody, MF20, which has been shown previously to bind the myosin heavy chain of vertebrate striated muscle, has been proven to bind the light meromyosin (LMM) fragment by solid phase radioimmune assay with alpha-chymotryptic digests of purified myosin. Epitope mapping by electron microscopy of rotary-shadowed, myosin-antibody complexes has localized the antibody binding site to LMM at a point approximately 92 nm from the C-terminus of the myosin heavy chain. Since this epitope in native thick filaments is accessible to monoclonal antibodies, we used this antibody as a high affinity ligand to analyze the packing of LMM along the backbone of the thick filament. By immunofluorescence microscopy, MF20 was shown to bind along the entire A-band of chicken pectoralis myofibrils, although the epitope accessibility was greater near the ends than at the center of the A-bands. Thin-section, transmission electron microscopy of myofibrils decorated with MF20 revealed 50 regularly spaced, cross-striations in each half A-band, with a repeat distance of approximately 13 nm. These were numbered consecutively, 1-50, from the A-band to the last stripe, approximately 68 nm from the filament tips. These same striations could be visualized by negative staining of native thick filaments labeled with MF20. All 50 striations were of a consecutive, uninterrupted repeat which approximated the 14-15-nm axial translation of cross-bridges. Each half M-region contained five MF20 striations (approximately 13 nm apart) with a distance between stripes 1 and 1', on each half of the bare zone, of approximately 18 nm. This is compatible with a packing model with full, antiparallel overlap of the myosin rods in the bare zone region. Differences in the spacings measured with negatively stained myofilaments and thin-sectioned myofibrils have been shown to arise from specimen shrinkage in the fixed and embedded preparations. These observations provide strong support for Huxley's original proposal for myosin packing in thick filaments of vertebrate muscle (Huxley, H. E., 1963, J. Mol. Biol., 7:281-308) and, for the first time, directly demonstrate that the 14-15-nm axial translation of LMM in the thick filament backbone corresponds to the cross-bridge repeat detected with x-ray diffraction of living muscle.     

Role of magnesium binding to myosin in controlling the state of cross-bridges in skeletal rabbit muscle

The effect of Mg2+ on the disposition of myosin cross-bridges was studied on myofibrils and synthetic myosin and rod filaments by employing chymotryptic digestion and chemical cross-linking methods. In the presence of low Mg2+ concentrations (0.1 mM), the proteolytic susceptibility at the heavy meromyosin/light meromyosin (HMM/LMM) junction in these three systems sharply increases over the pH range from 7.0 to 8.2. Such a change has been previously associated with the release of myosin cross-bridges from the filament surface [Ueno, H., & Harrington, W.F. (1981) J. Mol. Biol. 149, 619-640]. Millimolar concentrations of Mg2+ block or reverse this charge-dependent transition. Rod filaments show the same behavior as myosin filaments, indicating that the low-affinity binding sites for Mg2+ are located on the rod portion of myosin. The interpretation of these results in terms of Mg2+-mediated binding of cross-bridges to the filament backbone is supported by cross-linking experiments. The normalized rate of S-2 cross-linking in rod filaments at pH 8.0, kS-2/kLMM, increases upon addition of Mg2+ from 0.30 to 0.65 and approaches the cross-linking rate measured at pH 7.0 (0.75), when the cross-bridges are close to the filament surface. In rod filaments prepared from oxidized rod particles, chymotryptic digestion proceeds both at the S-2/LMM junction and at a new cleavage site located in the N-terminal portion of the molecule. Kinetic analysis of digestion rates at these two sites reveals that binding of Mg2+ to oxidized myosin rods has a similar effect at both sites over the pH range from 7.0 to 8.0.(ABSTRACT TRUNCATED AT 250 WORDS)     

Electron microscopy of synthetic myosin filaments. Evidence for cross- bridge. Flexibility and copolymer formation

Electron micrographs of negatively stained synthetic myosin filaments reveal that surface projections, believed to be the heads of the constituent myosin molecules, can exist in two configurations. Some filaments have the projections disposed close to the filament backbone. Other filaments have all of their projections widely spread, tethered to the backbone by slender threads. Filaments formed from the myosins of skeletal muscle, smooth muscle, and platelets each have distinctive features, particularly their lengths. Soluble mixtures of skeletal muscle myosin with either smooth muscle myosin or platelet myosin were dialyzed against 0.1 M KC1 at pH 7 to determine whether the simultaneous presence of two types of myosin would influence the properties of the filaments formed. In every case, a single population of filaments formed from the mixtures. The resulting filaments are thought to be copolymers of the two types of myosin, for several reasons: (a) their length-frequency distribution is unimodal and differs from that predicted for a simple mixture of two types of myosin filaments; (b) their mean length is intermediate between the mean lengths of the filaments formed separately from the two myosins in the mixture; (c) each of the filaments has structural features characteristic of both of the myosins in the mixture; and (d) their size and shape are determined by the proportion of the two myosins in the mixture.     

The single nuclear lamin of Caenorhabditis elegans forms in vitro stable intermediate filaments and paracrystals with a reduced axial periodicity

The lamins of the tunicate Ciona intestinalis and the nematode Caenorhabditis elegans show unusual sequence features when compared to the more than 35 metazoan lamin sequences currently known. We therefore analyzed the in vitro assembly of these two lamins by electron microscopy using chicken lamin B2 as a control. While lamin dimers usually appear as a rod carrying two globules at one end, these globules are absent from Ciona lamin, which lacks the central 105-residue region of the tail domain. The deletion of 14 residues or two heptads from the coiled coil rod domain of the single C.elegans lamin results in a 1.5-nm shortening of the dimer rod. Similarly, the paracrystals assembled from the C.elegans lamin exhibit a 3.1-nm reduction of the true axial repeat compared to that of chicken lamin B2 paracrystals. We speculate that the banding pattern in the C.elegans lamin paracrystals arises from a relative stagger between dimers and/or a positioning of the globular tail domain relative to the central rod that is distinct from that observed in chicken lamin B2 paracrystals. Here we show that a nuclear lamin can assemble in vitro into 10-nm intermediate filaments (IFs). C.elegans lamin in low ionic strength Tris-buffers at a pH of 7.2-7.4 provides a stable population of lamin IFs. Some implications of this filament formation are discussed.     

Interaction of tropomyosin with troponin components.

1. The TN-T and TN-I components of troponin both interact with tropomyosin and cause its precipitation in 0.1 M KC1 at neutral pH. The precipitate contains both end-to-end and side-by-side aggregates of tropomyosin molecules. 2. The TN-T and TN-I components change the band pattern of tropomyosin paracrystals formed in MgC1(2) solutions, although in different ways. TN-T causes the formation of hexagonal net structures, double-stranded net or paracrystals which result from the collapse of the double-stranded net. TN-I at pH 7.9 causes the formation of paracrystals with a 400 A periodic band pattern and a 200 A repeat. The same band pattern can also be seen in tropomyosin paracrystals formed at pH values below 6.0. 3. The TN-C component does not precipitate tropomyosin in 0.1 M KC1. The aggregates of tropomyosin obtained with either TN-T or TN-I can be solubilized by the addition of TN-C. No interaction of TN-C was observed with tropomyosin paracrystals formed in the presence of MgC12.     

A kinetic model for the molecular basis of the contractile activity of Acanthamoeba myosins IA and IB

Acanthamoeba myosins IA and IB are single-headed, monomeric molecules consisting of one heavy chain and one light chain. Both have high actin-activated Mg2+-ATPase activity, when the heavy chain is phosphorylated, but neither seems to be able to form the bipolar filaments that are generally thought to be required for actomyosin-dependent contractility. In this paper, we show that, at fixed F-actin concentration, the actin-activated Mg2+-ATPase activities of myosins IA and IB increase about 5-fold in specific activity in a cooperative manner as the myosin concentration is increased. The myosin concentration range over which this cooperative change occurs depends on the actin concentration. More myosin I is required for the cooperative increase in activity at high concentrations of F-actin. The cooperative increase in specific activity at limiting actin concentrations is caused by a decrease in the KATPase for F-actin. The high and low KATPase states of the myosin have about the same Vmax at infinite actin concentration. Both myosins are completely bound to the F-actin long before the Vmax values are reached. Therefore, much of the actin activation must be the result of interactions between F-actin and actomyosin. These kinetic data can be explained by a model in which the cooperative shift of myosin I from the high KATPase to the low KATPase state results from the cross-linking of actin filaments by myosin I. Cross-linking might occur either through two actin-binding sites on a single molecule or by dimers or oligomers of myosin I induced to form by the interaction of myosin I monomers with the actin filaments. The ability of Acanthamoeba myosins IA and IB to cross-link actin filaments is demonstrated in the accompanying paper (Fujisaki, H., Albanesi, J.P., and Korn, E.D. (1985) J. Biol. Chem. 260, 11183-11189).     

Purified thick filaments from the nematode Caenorhabditis elegans: evidence for multiple proteins associated with core structures

The thick filaments of the nematode, Caenorhabditis elegans, arising predominantly from the body-wall muscles, contain two myosin isoforms and paramyosin as their major proteins. The two myosins are located in distinct regions of the surfaces, while paramyosin is located within the backbones of the filaments. Tubular structures constitute the cores of the polar regions, and electron-dense material is present in the cores of the central regions (Epstein, H.F., D.M. Miller, I. Ortiz, and G.C. Berliner. 1985. J. Cell Biol. 100:904-915). Biochemical, genetic, and immunological experiments indicate that the two myosins and paramyosin are not necessary core components (Epstein, H.F., I. Ortiz, and L.A. Traeger Mackinnon. 1986. J. Cell Biol. 103:985-993). The existence of the core structures suggests, therefore, that additional proteins may be associated with thick filaments in C. elegans. To biochemically detect minor associated proteins, a new procedure for the isolation of thick filaments of high purity and structural preservation has been developed. The final step, glycerol gradient centrifugation, yielded fractions that are contaminated by, at most, 1-2% with actin, tropomyosin, or ribosome-associated proteins on the basis of Coomassie Blue staining and electron microscopy. Silver staining and radioautography of gel electrophoretograms of unlabeled and 35S-labeled proteins, respectively, revealed at least 10 additional bands that cosedimented with thick filaments in glycerol gradients. Core structures prepared from wild-type thick filaments contained at least six of these thick filament-associated protein bands. The six proteins also cosedimented with thick filaments purified by gradient centrifugation from CB190 mutants lacking myosin heavy chain B and from CB1214 mutants lacking paramyosin. For these reasons, we propose that the six associated proteins are potential candidates for putative components of core structures in the thick filaments of body-wall muscles of C. elegans.     

Heat-induced Gelation of Myosin from Leg and Breast Muscles of Chicken

Heat-induced gelation of myosin from leg and breast muscles of chicken was studied in 0.6 m KC1. Gel strength of breast myosin was higher than that of leg myosin between pH 5.2 and 6.0. Turbidity of breast myosin increased below pH 6.0 but that of leg myosin did not increase at pH 5.7. Turbidity of leg myosin was higher than that of breast myosin below pH 5.6. Viscosity of breast myosin increased between pH 5.5 and 6.0 as the pH decreases, although that of leg myosin decreased. The breast myosin assembled to form long filaments at pH 5.7, but leg myosin failed to form long filaments. At pH 5.4, breast myosin filaments became longer and leg myosin assembled into filaments though they were shorter than breast myosin filaments. The strength of heat-induced gel formed from the filamentous leg and breast myosins at acidic region was not influenced by F-actin. These results indicate that the strength of heat-induced gel of both myosins is closely related to their morphological properties.     

Interaction of aldolase with actin-containing filaments. Structural studies.

Electron micrographs of the paracrystals formed when fructose bisphosphate aldolase (EC 4.1.2.13) is added to actin-containing filaments were analysed by computer methods so that ultrastructural changes could be correlated with the various stoicheiometries of binding determined in the preceding paper [Walsh, Winzor, Clarke, Masters & Morton (1980) Biochem. J. 186, 89-98]. Paracrystals formed with aldolase and either F-actin or F-actin-tropomyosin have a single light transverse band every 38 nm, which is due to aldolase molecules cross-linking the filaments. In contrast, the paracrystals formed between aldolase and F-actin-tropomyosin-troponin filaments show two transverse bands every 38 nm: a major band, interpreted as aldolase binding to troponin, and a minor band, interpreted as aldolase cross-linking the filaments. The intensity of the minor band varies with Ca2+ concentration, being greatest when the Ca2+ concentration is low. A model for the different paracrystal structures which relates the various patterns and binding stoicheiometries to structural changes in the actin-containing filaments is proposed.     

Distribution of epinemin in colloidal gold-labelled, quick-frozen, deep- etched cytoskeletons

In this study I describe the ultrastructural distribution of epinemin (Lawson, D., 1983, J. Cell Biol., 97:1891-1905) in antibody-labelled, helium-cooled, quick-frozen, deep-etched cytoskeletons. This technique reveals that epinemin is expressed asymmetrically at discrete sites on the vimentin core polymer and that usually one (occasionally two or three) antiepinemin molecules are found at each of these discrete foci. Single receptor-bound antiepinemin (IgM) molecules are easily identified in deep-etched cytoskeletons by the use of colloidal gold. Epinemin does not cross-link adjacent intermediate filaments and is not associated with the many 2-3-nm filaments found associated with intermediate filaments in these preparations. The directional changes and interactions undergone by microtubules in taxol-stabilized, antibody-labelled cytoskeletons are also discussed.     

Role of the C-terminal extremities of the smooth muscle myosin heavy chains: implication for assembly properties.

The two light meromyosin isoforms from rabbit smooth muscle were prepared as recombinant proteins in Escherichia coli. These species which differed only by their C-terminal extremity showed the same circular dichroism spectra and endotherms in measurements of differential scanning calorimetry. Their solubility properties were different at pH 7.0 in the absence of monovalent salts. Their paracrystals formed at low pH differed by their aspect and number. These data suggest a role for the C-terminal extremity of myosin heavy chains in the assembly of myosin molecules in filaments and consequently in the contractility of smooth muscles.     

Visualization of monoclonal antibody binding to tropomyosin on native smooth muscle thin filaments by electron microscopy

We have used three different monoclonal antibodies (LCK16, JLH2 and JLF15) to tropomyosin for the localization of tropomyosin molecules within smooth muscle thin filaments. Thin filaments were incubated with monoclonal antibodies and visualized by negative staining electron microscopy. All three monoclonal antibodies caused the aggregation of thin filaments into ordered bundles, which displayed cross-striations with a periodicity of 37 ± 1 nm. In contrast, conventional rabbit antiserum to tropomyosin distorted and aggregated the thin filaments without generating cross-striations. Therefore, monoclonal antibodies to tropomyosin allow us, for the first time, to observe directly the distribution of tropomyosin molecules along the thin filaments of smooth muscle cells. The binding sites of the antibodies to skeletal muscle tropomyosin were examined by decorating tropomyosin paracrystals with monoclonal antibodies. The LCK16 monoclonal antibody binds the narrow band of tropomyosin paracrystals, whereas the JLF15 antibody binds the wide band of tropomyosin paracrystals.     

SOME PROPERTIES OF EMBRYONIC MYOSIN

Myosins from the following sources were purified by diethylaminoethyl-Sephadex chromatography: moytubes grown in vitro for 7–8 days, prepared from pectoralis muscles of 10-day old embryos, and breast and leg muscles from 16-day old embryos. The adenosine triphosphatase activities of these myosins were close to that of adult m. pectoralis myosin. The light chains of the embryonic myosins had the same mobilities in sodium dodecyl sulfate electrophoresis as those in adult pectoralis muscle myosin and were clearly distinguishable from those in myosin from tonic muscle m. latissimus dorsi anterior. The fastest light chain in embryonic muscle myosin—apparent mol wt 16,000—was present in smaller amounts than in adult myosin. The negative staining pattern of paracrystals of embryonic light meromyosin (LMM) was indistinguishable from that of adult fast muscle LMM. The significance of these results for differentiation of various muscle types has been discussed.     

Myosin monomer density and exchange in synthetic thick filaments investigated using fluorescence microscopy with single molecule sensitivity

The number of myosin molecules in synthetic thick filaments, prepared by dialysis at 0.12 M NaCl and pH 7.0, was estimated to be between 400 and 800 molecules per micrometre under conditions appropriate for in vitro motility assays. This estimate was based on a number count of Cy3-labelled myosin molecules incorporated into filaments at a nominal ratio of 1:1000. At this dilution, single fluorescent spots were resolved corresponding to individual labelled myosins. The spots usually bleached with a one- or two-step profile but, in around 30% of the cases, fluctuations were observed indicating that additional photophysical or photochemical events had occurred. Myosin molecules were shown to exchange between filaments in suspension on a time-scale of several hours at 4 degrees C, but the reaction was only 75% complete after 48 h, suggesting a non-exchangeable core. However, myosin exchange does not appear to be the predominant source of the fluctuations in fluorescence intensity in the single molecule assays.     

Inhibition of smooth muscle myosin's activity and assembly by an anti-rod monoclonal antibody.

Monoclonal antibodies specific for the rod region can affect smooth muscle myosin's motor properties. Actin movement by phosphorylated myosin was inhibited by an antibody (LMM.4) which binds to the COOH-terminal end of the coiled-coil rod, a region thought to be involved in filament assembly. The actin-activated ATPase activity of the myosin-antibody LMM.4 complex was also reduced 10-fold at actin concentrations that gave maximal turnover rates with filamentous myosin. Metal-shadowing of the phosphorylated myosin-antibody complex at low ionic strength showed small bundles of parallel extended molecules, instead of filaments. Five other anti-rod antibodies had little or no effect on myosin's ability to act as a motor. This is the first demonstration that a muscle myosin's activity is affected by its state of assembly. A common theme that emerges from the studies on both muscle and non-muscle myosins is that assembly into a filamentous structure stimulates the activity of the individual myosin molecules.