Extracellular production of beta-amylase by a halophilic isolate, <Emphasis Type="Italic">Halobacillus</Emphasis> sp. LY9

A moderately halophilic strain LY9 with high amylolytic activity was isolated from soil sample obtained from Yuncheng, China. Biochemical and physiological characterization along with 16S rRNA sequence analysis placed the isolate in the genus Halobacillus. Amylase production started from the post-exponential phase of bacterial growth and reached a maximum level during the early-stationary phase. The isolate LY9 was found to secrete the amylase, the production of which depended on the salinity of the growth medium. Maximum amylase production was observed in the presence of 10% KCl or 10% NaCl. Maltose was the main product of soluble starch hydrolysis, indicating a β-amylase activity. The enzyme showed optimal activity at 60°C, pH 8.0, and 10–12.5% of NaCl. It was highly active over broad temperature (50–70°C), NaCl concentration (5.0–20.0%), and pH (4.0–12.0) ranges, indicating its thermoactive and alkali-stable nature. However, activity dropped off dramatically at low NaCl concentrations, showing the amylase was halophilic. Ca²⁺ was found to stimulate the β-amylase activity, whereas ethylenediaminetetraacetic acid (EDTA), phenylarsine oxide (PAO), and diethyl pyrocarbonate (DEPC) strongly inhibited the enzyme, indicating it probably was a metalloenzyme with cysteine and histidine residues located in its active site. Moreover, the enzyme exhibited remarkable stability towards sodium dodecyl sulfate (SDS) and Triton X-100. This is the first report of β-amylase production from moderate halophiles. The present study indicates that the extracellular β-amylase of Halobacillus sp. LY9 may have considerable potential for industrial application owing to its properties.     

Characterization of an organic solvent-tolerant α-amylase from a halophilic isolate, <Emphasis Type="Italic">Thalassobacillus</Emphasis> sp. LY18

A halophilic isolate Thalassobacillus sp. LY18 producing extracellular amylase was isolated from the saline soil of Yuncheng Salt Lake, China. Production of the enzyme was synchronized with bacterial growth and reached a maximum level during the early stationary phase. The amylase was purified to homogeneity with a molecular mass of 31 kDa. Major products of soluble starch hydrolysis were maltose and maltotriose, indicating an α-amylase activity. Optimal enzyme activity was found to be at 70°C, pH 9.0, and 10 % NaCl. The α-amylase was highly stable over broad temperature (30–90°C), pH (6.0–12.0), and NaCl concentration (0–20 %) ranges, showing excellent thermostable, alkalistable, and halotolerant nature. The enzyme was stimulated by Ca²⁺, but greatly inhibited by EDTA, indicating it was a metalloenzyme. Complete inhibition by diethyl pyrocarbonate and β-mercaptoethanol revealed that histidine residue and disulfide bond were essential for enzyme catalysis. The surfactants tested had no significant effects on the amylase activity. Furthermore, it showed high activity and stability in the presence of water-insoluble organic solvents with log P _ow ≥ 2.13.     

Production,optimization and purification of a novel extracellular protease from the moderately halophilic bacterium <Emphasis Type="Italic">Halobacillus karajensis</Emphasis>

The production of a protease was investigated under conditions of high salinity by the moderately halophilic bacterium Halobacillus karajensis strain MA-2 in a basal medium containing peptone, beef extract, maltose and NaCl when the culture reached the stationary growth phase. Effect of various temperatures, initial pH, salt and different nutrient sources on protease production revealed that the maximum secretion occurred at 34°C, pH 8.0–8.5, and in the presence of gelatin. Replacement of NaCl by various concentrations of sodium nitrate in the basal medium also increased the protease production. The secreted protease was purified 24-fold with 68% recovery by a simple approach including a combination of acetone precipitation and Q-Sepharose ion exchange chromatography. The enzyme revealed a monomeric structure with a relative molecular mass of 36 kDa by running on SDS-PAGE. Maximum caseinolytic activity of the enzyme was observed at 50°C, pH 9.0 and 0.5 M NaCl, although at higher salinities (up to 3 M) activity still remained. The maximum enzyme activity was obtained at a broad pH range of 8.0–10.0, with 55 and 50% activity remaining at pH 6 and 11, respectively. Moreover, the enzyme activity was strongly inhibited by phenylmethylsulfonyl fluoride (PMSF), Pefabloc SC and EDTA; indicating that it probably belongs to the subclass of serine metalloproteases. These findings suggest that the protease secreted by Halobacillus karajensis has a potential for biotechnological applications from its haloalkaline properties point of view.     

Purification and stability characteristics of an alkaline serine protease from a newly isolated Haloalkaliphilic bacterium sp. AH-6

An alkaline protease secreting Haloalkaliphilic bacterium (Gene bank accession number EU118361) was isolated from the Saurashtra Coast in Western India. The alkaline protease was purified by a single step chromatography on phenyl sepharose 6 FF with 28% yield. The molecular mass was 40 kDa as judged by SDS-PAGE. The enzyme displayed catalysis and stability over pH 8–13, optimally at 9–11. It was stable with 0–4 M NaCl and required 150 mM NaCl for optimum catalysis at 37 °C; however, the salt requirement for optimal catalysis increased with temperature. While crude enzyme was active at 25–80 °C (optimum at 50 °C), the purified enzyme had temperature optimum at 37 °C, which shifted to 80 °C in the presence of 2 M NaCl. The NaCl not only shifted the temperature profile but also enhanced the substrate affinity of the enzyme as reflected by the increase in the catalytic constant (K _cat). The enzyme was also calcium dependent and with 2 mM Ca⁺², the activity reached to maximum at 50 °C. The crude enzyme was highly thermostable (37–90 °C); however, the purified enzyme lost its stability above 50 °C and its half life was enhanced by 30 and sevenfold at 60 °C with 1 M NaCl and 50 mM Ca⁺², respectively. The activity of the enzyme was inhibited by PMSF, indicating its serine type. While the activity was slightly enhanced by Tween-80 (0.2%) and Triton X-100 (0.05%), it marginally decreased with SDS. In addition, the enzyme was highly stable with oxidizing-reducing agents and commercial detergents and was affected by metal ions to varying extent. The study assumes significance due to the enzyme stability under the dual extremities of pH and salt coupled with moderate thermal tolerance. Besides, the facts emerged on the enzyme stability would add to the limited information on this enzyme from Haloalkaliphilic bacteria.     

Salt-activated endoglucanase of a strain of alkaliphilic Bacillus agaradhaerens

An endoglucanase was purified to homogeneity from an alkaline culture broth of a strain isolated from␣seawater and identified here as Bacillus agaradhaerens JAM-KU023. The molecular mass was around 38-kDa and the N-terminal 19 amino acids of the purified enzyme exhibited 100% sequence identity to Cel5A of B. agaradhaerens DSM8721^T. The enzyme activity increased around 4-fold by the addition of 0.2–2.0 M NaCl in 0.1 M glycine–NaOH buffer (pH 9.0). KCl, Na₂SO₄, NaBr, NaNO₃, CH₃COONa, LiCl, NH₄NO₃, and NH₄Cl also activated the enzyme up to 2- to 4-fold. The optimal pH and temperature values were pH 7–9.4 and 60 °C with 0.2 M NaCl, but pH 6.5–7 and 50 °C without NaCl; enzyme activity increased approximately 6-fold at 60 °C with 0.2 M NaCl compared to that at 50 °C without NaCl in 0.1 M glycine–NaOH buffer (pH 9.0). The thermostability and pH stability of the enzyme were not affected by NaCl. The enzyme was very stable to several chemical compounds, surfactants and metal ions (except for Fe²⁺ and Hg²⁺ ions), regardless whether NaCl was present or not. * The nucleotide sequence of 16S rRNA of this strain has been submitted to DDBJ, EMBL, and GenBank databases under accession no. AB211544.     

Purification and characterization of an endoxylanase from the culture broth of <Emphasis Type="Italic">Bacillus cereus</Emphasis> BSA1

An extracellular xylanase from the fermented broth of Bacillus cereus BSA1 was purified and characterized. The enzyme was purified to 3.43 fold through ammonium sulphate precipitation, DEAE cellulose chromatography and followed by gel filtration through Sephadex-G-100 column. The molecular mass of the purified xylanse was about 33 kDa. The enzyme was an endoxylanase as it initially degraded xylan to xylooligomers. The purified enzyme showed optimum activity at 55°C and at pH 7.0 and remained reasonably stable in a wide range of pH (5.0–8.0) and temperature (40–65°C). The K _m and V _max values were found to be 8.2 mg/ml and 181.8 μmol/(min mg), respectively. The enzyme had no apparent requirement of cofactors, and its activity was strongly inhibited by Cu²⁺, Hg²⁺. It was also a salt tolerant enzyme and stable upto 2.5 M of NaCl and retained its 85% activity at 3.0 M. For stability and substrate binding, the enzyme needed hydrophobic interaction that revealed when most surfactants inhibited xylanase activity. Since the enzyme was active over wide range of pH, temperature and remained active in higher salt concentration, it could find potential uses in biobleaching process in paper industries.     

Optimization of culture conditions for the production of halothermophilic protease from halophilic bacterium <Emphasis Type="Italic">Chromohalobacter</Emphasis> sp. TVSP101

An extremely halophilic Chromohalobacter sp. TVSP101 was isolated from solar salterns and screened for the production of extracellular halothermophilic protease. Identification of the bacterium was done based upon biochemical tests and the 16S rRNA sequence. The partially purified enzyme displayed maximum activity at pH 8 and required 4.5 M of NaCl for optimum proteolytic activity. In addition, this enzyme was thermophilic and active in broad range of temperature 60–80°C with 80°C as optimum. The Chromohalobacter sp. required 4 M NaCl for its optimum growth and protease secretion and no growth was observed below 1 M of NaCl. The initial pH of the medium for growth and enzyme production was in the range 7.0–8.0 with optimum at pH 7.2. Various cations at 1 mM concentration in the growth medium had no significant effect in enhancing the growth and enzyme production but 0.5 M MgCl₂ concentration enhanced enzyme production. Casein or skim milk powder 1% (w/v) along with 1% peptone proved to be the best nitrogen sources for maximum biomass and enzyme production. The carbon sources glucose and glycerol repressed the protease secretion. Immobilization of whole cells in absence of NaCl proved to be useful for continuous production of halophilic protease.     

Purification and properties of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis><Emphasis Type="Italic">S</Emphasis>-adenosylmethionine synthetase expressed in recombinant <Emphasis Type="Italic">Pichia pastoris</Emphasis>

An intracellular S-adenosylmethionine synthetase (SAM-s) was purified from the fermentation broth of Pichia pastoris GS115 by a sequence chromatography column. It was purified to apparent homogeneity by (NH₄)₂SO₄ fractionation (30–60%), anion exchange, hydrophobic interaction, anion exchange and gel filtration chromatography. HPLC showed the purity of purified SAM-s was 91.2%. The enzyme was purified up to 49.5-fold with a final yield of 20.3%. The molecular weight of the homogeneous enzyme was 43.6 KDa, as determined by electro-spray ionization mass spectrometry (ESI-MS). Its isoelectric point was approximately 4.7, indicating an acidic character. The optimum pH and temperature for the enzyme reaction were 8.5 and 35 °C, respectively. The enzyme was stable at pH 7.0–9.0 and was easy to inactivate in acid solution (pH ≤ 5.0). The temperature stability was up to 45 °C. Metal ions, such as, Mn²⁺ and K⁺ at the concentration of 5 mM had a slight activation effect on the enzyme activity and the Mg²⁺ activated the enzyme significantly. The enzyme activity was strongly inhibited by heavy metal ions (Cu²⁺ and Ag²⁺) and EDTA. The purified enzyme from the transformed Pichia pastoris synthesized S-adenosylmethionine (SAM) from ATP and l-methionine in vitro with a K _m of 120 and 330 μM and V _max of 8.1 and 23.2 μmol/mg/min for l-methionine and ATP, respectively.     

Partial purification and properties of a laundry detergent compatible alkaline protease from a newly isolated <Emphasis Type="Italic">Bacillus</Emphasis> species Y

Alkaline protease production by a newly isolated Bacillus species from laundry soil was studied for detergent biocompatibility. From its morphological and nucleotide sequence (about 1.5 kb) of its 16S rDNA it was identified as Bacillus species with similarity to Bacillus species Y (Gen Bank entry: ABO 55095), and close homology with Bacillus cohnii YN-2000 (Gen Bank entry: ABO23412). Partial purification of the enzyme by ammonium sulfate (50–70% saturation) yielded 8-fold purity. Casein zymography and Sodium dodecylsulphate-Polyacrylamide gel electrophoresis (SDS-PAGE) of the partially purified enzyme revealed two isozymes of molecular sizes approximately 66 kDa and 18 kDa, respectively. The enzyme was most active at pH 12 and 50°C. At pH 12 the enzyme was stable for 5 h and retained 60% activity. The enzyme retained 44% activity at 50°C up to 2 h. The protease showed good hydrolysis specificity with different substrates tested. The presence of Mn²⁺, Co²⁺ and ethylenediaminetetracetic acid (EDTA) showed profound increase in protease activity. The protease of Bacillus species Y showed excellent stability and compatibility with three locally available detergents (Kite, Tide and Aerial) up to 3 h retaining almost 70–80% activity and 10–20% activity at room temperature (30°C) and 50°C, respectively, indicating the potential role of this enzyme for detergent application.     

A novel thermostable and halostable carboxymethylcellulase from marine bacterium <Emphasis Type="Italic">Bacillus licheniformis</Emphasis>AU01

A novel thermostable, halostable carboxymethylcellulase (CMCase) from a marine bacterium Bacillus licheniformisAU01 was purified 10.4-fold with 18% yield with a specific activity of 88.43 U/mg and the molecular weight was estimated as 37 kDa. The enzyme was optimally active at pH 9–10 and temperature 50–60°C and it was most stable up to pH 12 and 20–30% of NaCl concentration. The enzyme activity was reduced when treated with Hg²⁺, Fe²⁺ and EDTA and stimulated by Co²⁺, Mn²⁺, Mg²⁺ and Ca²⁺. Various cationic, anionic detergents and commercial detergents were not much affected CMCase activity.     

Purification and biological characterization of a halophilic thermostable protease from <Emphasis Type="Italic">Haloferax lucentensis</Emphasis> VKMM 007

An extremely halophilic archaeon Haloferax lucentensis VKMM 007, isolated from a solar saltern, was found to produce a protease. This extracellular enzyme consisted of a single polypeptide chain of 57.8 kDa as determined by SDS–PAGE and was purified by a combination of ultrafiltration, bacitracin–Sepharose affinity chromatography and Sephadex G-100 gel filtration. The purified protein was stable in a wide range of temperatures (20–70°C), NaCl concentrations (0.85–5.13 M) and pH (5.0–9.0) with maximal activity observed at 60°C, 4.3 M NaCl and pH 8.0. Proteolytic activity was enhanced by Ca²⁺, K⁺, Mg²⁺, Na⁺, and Fe²⁺ ions and the protein was classified as a trypsin-like serine protease. Further assays indicated highest degree of specificity when hemoglobin was used as an enzyme substrate. Most importantly, the proteolytic activity remained stable or only marginally inhibited in the presence of various polar and non-polar solvents, surfactants and reducing agents thus emphasizing the biotechnological potential of this novel halophilic protease.     

Production and characterization of a collagenolytic serine proteinase by <Emphasis Type="Italic">Penicillium aurantiogriseum</Emphasis> URM 4622: A factorial study

A 2⁴ full factorial design was used to identify the main effects and interactions of the initial medium pH, soybean flour concentration, temperature and orbital agitation speed on extracellular collagenase production by Penicillium aurantiogriseum URM4622. The most significant variables for collagenase production were soybean flour concentration and initial medium pH that had positive main effects, and temperature that had a negative one. Protein concentration in soybean flour revealed to be a significant factor for the production of a collagenase serine proteinase. The most favorable production conditions were found to be 0.75% soybean flour, pH 8.0, 200 rpm, and 28°C, which led to a collagenase activity of 164 U. The enzyme showed an optimum activity at 37°C and pH 9.0, was stable over wide ranges of pH and temperature (6.0 ∼ 10.0 and 25 ∼ 45°C, respectively) and was strongly inhibited by 10 mM phenylmethylsulphonylfluoride. The firstorder rate constants for collagenase inactivation in the crude extract, calculated from semi-log plots of the residual activity versus time, were used in Arrhenius and Eyring plots to estimate the main thermodynamic parameters of thermoinactivation (E* _d = 107.4 kJ/mol and ΔH* _d = 104.7 kJ/mol). The enzyme is probably an extracellular neutral serine collagenase effective on azocoll, gelatin and collagen decomposition.     

Isolation,purification, and characterization of haloalkaline xylanase from a marine <Emphasis Type="Italic">Bacillus pumilus</Emphasis> strain,GESF-1

A haloalkalitolerant xylanase-producing Bacillus pumilus strain, GESF1 was isolated from an experimental salt farm of CSMCRI. Birch wood xylan and xylose induced maximum xylanase production with considerable activity seen in wheat straw and no activity at all with caboxymethyl cellulose (CMC). A three step purification yielded 21.21-fold purification with a specific activity of 112.42 U/mg protein (unit expressed as μmole of xylose released per min). Xylanase produced showed an optimum activity at pH 8.0, with approximately 50 and 30% relative activity at a pH 6.0 and 10.0, respectively. The temperature optimum was 40°C and kinetic properties such as K_m and V_max were 5.3 mg/mL and 0.42 μmol/min/mL (6593.4 μmol/min/mg protein). Xylanase activity (160∼ 120%) was considerably enhanced in 2.5 to 7.5% NaCl with 87 and 73% retention of activity in 10 and 15% of NaCl. Enzyme activity was enhanced by Ca²⁺, Mn²⁺, Mg²⁺, and Na⁺ but strongly inhibited by heavy metals such as Hg²⁺, Fe³⁺, Cu²⁺, Cd²⁺, and Zn²⁺. Organic reagents such as β-Mercaptoethanol enhanced xylanase activity whereas EDTA strongly inhibited its activity. Xylanase, purified from the Bacillus pumilus strain, GESF1 could have potential biotechnological applications.     

Extracellular production of <Emphasis Type="Italic">Streptomyces exfoliatus</Emphasis> poly(3-hydroxybutyrate) depolymerase in <Emphasis Type="Italic">Rhodococcus</Emphasis> sp. T104: determination of optimal biocatalyst conditions

The phaZ _Sex gene encoding poly(3-hydroxybutyrate) depolymerase from Streptomyces exfoliatus has been successfully cloned and expressed in Rhodococcus sp. T104 for the first time. Likewise, the recombinant enzyme was efficiently produced as an extracellular active form and purified to homogeneity by two hydrophobic chromatographic steps. MALDI-TOF analysis showed that the native enzyme is a monomer. Circular dichroism studies have revealed a secondary structure showing 25.6% α-helix, 21.4% β-sheet, 17.1% β-turns, and 35.2% random coil, with a midpoint transition temperature (T _m) of 55.8 °C. Magnesium and calcium ions enhanced the enzyme activity, whereas manganese inhibited it. EDTA moderately decreased the activity, and the enzyme was completely deactivated at 3 M NaCl. Chemical modification studies indicated the presence of the catalytic triad serine–histidine–carboxylic acid in the active site. High-performance liquid chromatography (HPLC)–mass spectrometry (MS) analysis of PHB products of enzymatic hydrolysis showed monomers and dimers of 3-hydroxybutyric acid, demonstrating that PHB depolymerase is an exo-hydrolase. Addition of methyl-β-cyclodextrin simultaneously increased the activity as well as preserved the enzyme during lyophilization. Finally, thermoinactivation studies showed that the enzyme is highly stable at 40 °C. All these features support the potential industrial application of this recombinant enzyme in the production of (R)-3-hydroxyalkanoic acid derivatives as well as in the degradation of bioplastics.     

Purification and characterization of a β-glucosidase fromAspergillus niger

The high-molar mass from of β-glucosidase fromAspergillus niger strain NIAB280 was purified to homogeneity with a 46-fold increase in purification by a combination of ammonium sulfate precipitation, hydrophobic interaction, ion-exchange and gel-filtration chromatography. The native and subunit molar mass was 330 and 110 kDa, respectively. The pH and temperature optima were 4.6–5.3 and 70°C, respectively. TheK _m andk _cat for 4-nitrophenyl β-d-glucopyranoside at 40°C and pH 5 were 1.11 mmol/L and 4000/min, respectively. The enzyme was activated by low and inhibited by high concentrations of NaCl. Ammonium sulfate inhibited the enzyme. Thermolysin periodically inhibited and activated the enzyme during the course of reaction and after 150 min of proteinase treatment only 10% activity was lost with concomitant degradation of the enzyme into ten low-molar-mass active bands. When subjected to 0–9 mol/L transverse urea-gradient-PAGE for 105 min at 12°C, the nonpurified β-glucosidase showed two major bands which denatured at 4 and 8 mol/L urea, respectively, with half-lives of 73 min.     

Extracellular deoxyribonuclease production by a thermophile, Streptomyces thermonitrificans

A thermophilic bacterial strain, Streptomyces thermonitrificans, produced high levels of extracellular deoxyribonuclease (DNase) when grown on NBG medium (containing 1% peptone, 0.3% beef extract, 1% glucose and 0.5% NaCl). Maximum DNase activity (140 U ml⁻¹) was obtained, in 24 h, when the culture was grown on modified NBG medium (containing 1.3% beef extract, 1% glucose, 0.5% NaCl and 50 μM Mn²⁺ at 45°C. The crude enzyme showed higher activity on native DNA than on sonicated and heat denatured DNA. Moreover, addition of Mn²⁺ in the assay mixture resulted in a significant stimulation (10–15 fold) of the enzyme activity. Received 24 November 1998/ Accepted in revised form 25 April 1999     

Production,purification and characterization of <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE7 xylanase and its application in eucalyptus Kraft pulp biobleaching

Production of extracellular xylanase from Bacillus sp. GRE7 using a bench-top bioreactor and solid-state fermentation (SSF) was attempted. SSF using wheat bran as substrate and submerged cultivation using oat-spelt xylan as substrate resulted in an enzyme productivity of 3,950 IU g⁻¹ bran and 180 IU ml⁻¹, respectively. The purified enzyme had an apparent molecular weight of 42 kDa and showed optimum activity at 70°C and pH 7. The enzyme was stable at 60–80°C at pH 7 and pH 5–11 at 37°C. Metal ions Mn²⁺ and Co²⁺ increased activity by twofold, while Cu²⁺ and Fe²⁺ reduced activity by fivefold as compared to the control. At 60°C and pH 6, the K _m for oat-spelt xylan was 2.23 mg ml⁻¹ and V _max was 296.8 IU mg⁻¹ protein. In the enzymatic prebleaching of eucalyptus Kraft pulp, the release of chromophores, formation of reducing sugars and brightness was higher while the Kappa number was lower than the control with increased enzyme dosage at 30% reduction of the original chlorine dioxide usage. The thermostability, alkali-tolerance, negligible presence of cellulolytic activity, ability to improve brightness and capacity to reduce chlorine dioxide usage demonstrates the high potential of the enzyme for application in the biobleaching of Kraft pulp.     

Characterization of an extracellular alkaline serine protease from marine <Emphasis Type="Italic">Engyodontium album</Emphasis> BTMFS10

An alkaline protease from marine Engyodontium album was characterized for its physicochemical properties towards evaluation of its suitability for potential industrial applications. Molecular mass of the enzyme by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) analysis was calculated as 28.6 kDa. Isoelectric focusing yielded pI of 3–4. Enzyme inhibition by phenylmethylsulfonyl fluoride (PMSF) and aprotinin confirmed the serine protease nature of the enzyme. K _m, V _max, and K _cat of the enzyme were 4.727 × 10⁻² mg/ml, 394.68 U, and 4.2175 × 10⁻² s⁻¹, respectively. Enzyme was noted to be active over a broad range of pH (6–12) and temperature (15–65°C), with maximum activity at pH 11 and 60°C. CaCl₂ (1 mM), starch (1%), and sucrose (1%) imparted thermal stability at 65°C. Hg²⁺, Cu²⁺, Fe³⁺, Zn²⁺, Cd⁺, and Al³⁺ inhibited enzyme activity, while 1 mM Co²⁺ enhanced enzyme activity. Reducing agents enhanced enzyme activity at lower concentrations. The enzyme showed considerable storage stability, and retained its activity in the presence of hydrocarbons, natural oils, surfactants, and most of the organic solvents tested. Results indicate that the marine protease holds potential for use in the detergent industry and for varied applications.     

Purification and characterization of an intracellular β-glucosidase from the protoplast fusant of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> and <Emphasis Type="Italic">Aspergillus niger</Emphasis>

Protoplasts of Aspergillus oryzae 3.481 and Aspergillus niger 3.316 were prepared using cellulose and snail enzyme with 0.6 M NaCl as osmotic stabilizer. Protoplast fusion has been performed using 35% polyethylene glycol 4,000 with 0.01 mM CaCl₂. The fused protoplasts have been regenerated on regeneration medium and fusants were selected for further studies. An intracellular (β-glucosidase (EC 3.2.1.21) was purified from the protoplast fusant of Aspergillus oryzae 3.481 and Aspergillus niger 3.316 and characterized. The enzyme was purified 138.85-fold by ammonium sulphate precipitation, DE-22 ion exchange and Sephadex G-150 gel filtration chromatography with a specific activity of 297.14 U/mg of protein. The molecular mass of the purified enzyme was determined to be about 125 kDa by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The enzyme had an optimum pH of 5.4 and temperature of 65°C, respectively. This enzyme showed relatively high stability against pH and temperature and was stable in the pH range of 3.0–6.6. Na⁺, K⁺, Ca²⁺, Mg²⁺ and EDTA completely inhibited the enzyme activity at a concentration of 10 mM. The enzyme activity was accelerated by Fe³⁺. The enzyme activity was strongly inhibited by glucose, the end product of glucoside hydrolysis. The K _m and V _max values against salicin as substrate were 0.035 mM and 1.7215 μmol min⁻¹, respectively.     

Purification,characterization and cloning of aldehyde dehydrogenase from <Emphasis Type="Italic">Rhodococcus erythropolis</Emphasis> UPV-1

The enzyme responsible for formaldehyde removal in industrial wastewaters by cells of Rhodococcus erythropolis UPV-1 was identified as a broad-specific aldehyde dehydrogenase (EC 1.2.1.3). The enzyme was purified to electrophoretic homogeneity from ethanol-grown cells with a specific activity of 19.5 U mg⁻¹ protein and an activity recovery of 56%. The enzyme showed an isoelectric point (pI) of 5.3 and was a trimer of 162 kDa consisting of three identical 54-kDa subunits. It was specific for NAD⁺ and showed hyperbolic kinetics for this coenzyme (K _m=90 μM), but sigmoidal kinetics for the aliphatic aldehydes used as substrates. The enzyme affinity for aldehydes increased with their hydrocarbon chain length, ranging from 333 μM for formaldehyde to 85 nM for n-octanal. The corresponding calculated Hill coefficients were in the 1.55–2.77 range. With n-propanal as substrate, the optimum pH and temperature for activity were 9.5–10.0 and 47.5°C, respectively, with an E _a for catalysis of 28.6 kJ mol⁻¹. NAD⁺ protected the enzyme against thermal inactivation, but aldehydes were ineffective. The activity was severely inhibited by p-hydroxymercuribenzoate, indicating that a thiol was essential for catalysis. The 1,524-bp aldhR gene encoding a 507-amino-acid protein was expressed in cells of Escherichia coli M15 as a hexahistidine-tagged protein.