Cellular internalization of poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymer micelles

Poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) block copolymers self-assemble into micelles in aqueous solution. We have examined whether these micelles can internalize into P19 cells in vitro. Fluorescently labeled PEO(45)-b-PCL(23) block copolymer was prepared by conjugating a tetramethylrhodamine molecule to the end of the hydrophobic PCL block. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies yielded 24 +/- 2 and 25 +/- 2 nm, respectively, for the diameters of the micelles. The studies also showed that chemical labeling did not effect the morphology or size. When the rhodamine-labeled PEO(45)-b-PCL(23) block copolymer micelles were tested in vitro, time-, concentration-, and pH-dependence of the internalization process suggested that internalization proceeded by endocytosis. The results from these studies provide the first direct evidence for the internalization of PEO(45)-b-PCL(23) micelles. Future studies will utilize multiple labeling of these micelles, allowing questions to be addressed related to the fate of internalized micelles as drug carriers, the destination of the incorporated drugs or fluorescent probes released from micelles, and the identification of the subcellular localization of the whole drug-carrier system within cells, both in vitro and in vivo.     

Epidermal growth factor-conjugated poly(ethylene glycol)-block- poly(delta-valerolactone) copolymer micelles for targeted delivery of chemotherapeutics

Epidermal growth factor (EGF)-conjugated copolymer micelles were prepared from a mixture of diblock copolymers of methoxy poly(ethylene glycol)-block-poly(delta-valerolactone) (MePEG-b-PVL) and EGF-PEG-b-PVL for targeted delivery to EGF receptor (EGFR)-overexpressing cancers. The block copolymers and functionalized block copolymers were synthesized using PEG as the macroinitiator and HCl-diethyl ether as the catalyst. The MePEG-b-PVL and the carboxyl-terminated PEG-b-PVL (HOOC-PEG-b-PVL) copolymers were found to have molecular weights of 5940 and 5900, respectively, as determined by gel permeation chromatography (GPC) analyses. The HOOC-PEG-b-PVL copolymers were then activated by N-hydroxysuccinimide and subsequently reacted with EGF to form the EGF-PEG-b-PVL copolymers. The efficiency for the conjugation of EGF to the copolymer was found to be 60.9%. A hydrophobic fluorescent probe, CM-DiI, was loaded into both the nontargeted MePEG-b-PVL micelles and the targeted EGF-conjugated PEG-b-PVL micelles. The effective mean diameters of the CMDiI-loaded nontargeted and the CMDiI-loaded targeted micelles were found to be 32 +/- 1 nm and 45 +/- 2 nm, respectively, as determined by dynamic light scattering (DLS). The zeta potentials for the nontargeted micelles (no CM-DiI-loaded), CM-DiI-loaded nontargeted micelles, and CM-DiI-loaded targeted micelles were found to be -6.5, -8.7, and - 13.5 mV, respectively. Evaluation of the in vitro release of CM-DiI from the MePEG-b-PVL micelles in phosphate buffer saline (0.01 M, pH = 7.4) containing 10% (v/v) fetal bovine serum at 37 degrees C revealed that approximately 20% of the probe was released within the first 2 h. Confocal laser scanning microscopy (CLSM) analysis revealed that the targeted micelles containing CM-DiI accumulated intracellularly in EGFR-overexpressing MDA-MB-468 breast cancer cells following a 2 h incubation period, while no detectable cell uptake was observed for the nontargeted micelles. Results obtained from the confocal images were confirmed in an independent study by measuring the intracellular CM-DiI fluorescence in cell lysate. In addition, the presence of free EGF was found to decrease the extent of uptake of the targeted micelles. Nuclear staining of the cells with Hoechst 33258 indicated that the targeted micelles mainly localized in the perinuclear region and some of the micelles were localized in the nucleus. These results demonstrate that the EGF-conjugated copolymer micelles developed in this study have potential as vehicles for targeting hydrophobic drugs to EGFR-overexpressing cancers.     

Synthesis and evaluation of a star amphiphilic block copolymer from poly(epsilon-caprolactone) and poly(ethylene glycol) as a potential drug delivery carrier

A star polymer composed of amphiphilic block copolymer arms has been synthesized and characterized. The core of the star polymer is polyamidoamine (PAMAM) dendrimer, the inner block in the arm is lipophilic poly(epsilon-caprolactone) (PCL), and the outer block in the arm is hydrophilic poly(ethylene glycol) (PEG). The star-PCL polymer was synthesized first by ring-opening polymerization of epsilon-caprolactone with a PAMAM-OH dendrimer as initiator. The PEG polymer was then attached to the PCL terminus by an ester-forming reaction. Characterization with SEC, (1)H NMR, FTIR, TGA, and DSC confirmed the star structure of the polymers. The micelle formation of the star copolymer (star-PCL-PEG) was studied by fluorescence spectroscopy. Hydrophobic dyes and drugs can be encapsulated in the micelles. A loading capacity of up to 22% (w/w) was achieved with etoposide, a hydrophobic anticancer drug. A cytotoxicity assay demonstrated that the star-PCL-PEG copolymer is nontoxic in cell culture. This type of block copolymer can be used as a drug delivery carrier.     

pH-responsive poly(styrene-alt-maleic anhydride) alkylamide copolymers for intracellular drug delivery

Many macromolecular therapeutics such as peptides, proteins, antisense oligodeoxynucleotides (ASODN), and short interfering RNA (siRNA) are active only in the cytoplasm or nucleus of targeted cells. Endocytosis is the primary route for cellular uptake of these molecules, which results in their accumulation in the endosomal-lysosomal trafficking pathway and loss of therapeutic activity. In this article, we describe the synthesis and pH-dependent membrane-destabilizing activity of a new "smart" polymer family that can be utilized to enhance the intracellular delivery of therapeutic macromolecules through the endosomal membrane barrier into the cytoplasm of targeted cells. These polymers are propylamine, butylamine, and pentylamine derivatives of poly(styrene-alt-maleic anhydride) (PSMA) copolymers. The PSMA-alkylamide derivatives are hydrophilic and membrane-inactive at physiological pH; however, they become hydrophobic and membrane-disruptive in response to endosomal pH values as measured by their hemolytic activity. Results show that the pH-dependent membrane-destabilizing activity of PSMA derivatives can be controlled by varying the length of the alkylamine group, the degree of modification of the copolymer, and the molecular weight of the PSMA copolymer backbone. Butylamine and pentylamine derivatives of PSMA copolymers exhibited more than 80% hemolysis at endosomal pH values, which suggests their potential as a platform of "smart" polymeric carriers for enhanced cytoplasmic delivery of a variety of therapeutic macromolecules.     

Ketal cross-linked poly(ethylene glycol)-poly(amino acid)s copolymer micelles for efficient intracellular delivery of doxorubicin

A biocompatible, robust polymer micelle bearing pH-hydrolyzable shell cross-links was developed for efficient intracellular delivery of doxorubicin (DOX). The rationally designed triblock copolymer of poly(ethylene glycol)-poly(L-aspartic acid)-poly(L-phenylalanine) (PEG-PAsp-PPhe) self-assembled to form polymer micelles with three distinct domains of the PEG outer corona, the PAsp middle shell, and the PPhe inner core. Shell cross-linking was performed by the reaction of ketal-containing cross-linkers with Asp moieties in the middle shells. The shell cross-linking did not change the micelle size and the spherical morphology. Fluorescence quenching experiments confirmed the formation of shell cross-linked diffusion barrier, as judged by the reduced Stern-Volmer quenching constant (K(SV)). Dynamic light scattering and fluorescence spectroscopy experiments showed that shell cross-linking improved the micellar physical stability even in the presence of micelle disrupting surfactants, sodium dodecyl sulfate (SDS). The hydrolysis kinetics study showed that the hydrolysis half-life (t(1/2)) of ketal cross-links was estimated to be 52 h at pH 7.4, whereas 0.7 h at pH 5.0, indicating the 74-fold faster hydrolysis at endosomal pH. Ketal cross-linked micelles showed the rapid DOX release at endosomal pH, compared to physiological pH. Confocal laser scanning microscopy (CLSM) showed that ketal cross-linked micelles were taken up by the MCF-7 breast cancer cells via endocytosis and transferred into endosomes to hydrolyze the cross-links by lowered pH and finally facilitate the DOX release to inhibit proliferation of cancer cells. This ketal cross-linked polymer micelle is promising for enhanced intracellular delivery efficiency of many hydrophobic anticancer drugs.     

Polycationic block copolymers of poly(ethylene oxide) and poly(propylene oxide) for cell transfection

A facile, one-step synthesis of cationic block copolymers of poly(2-N-(dimethylaminoethyl) methacrylate) (pDMAEMA) and copolymers of poly(propylene oxide) (PPO) and poly(ethylene oxide) (PEO) has been developed. The PEO-PPO-PEO-pDMAEMA (L92-pDMAEMA) and PEO-pDMAEMA copolymers were obtained via free radical polymerization of DMAEMA initiated by polyether radicals generated by cerium(IV). Over 95% of the copolymer fraction was of molecular mass ranging from 6.9 to 7.1 kDa in size, indicating the prevalence of the polyether-monoradical initiation mechanism. The L92-pDMAEMA copolymers possess parent surfactant-like surface activity. In contrast, the PEO-pDMAEMA copolymers lack significant surface activity. Both copolymers can complex with DNA. Hydrodynamic radii of the complexes of the L92-pDMAEMA and PEO-pDMAEMA with plasmid DNA ranged in size from 60 to 400 nm, depending on the copolymer/DNA ratio. Addition of Pluronic P123 to the L92-pDMAEMA complexes with DNA masked charges and decreased the tendency of the complex to aggregate, even at stoichiometric polycation/DNA ratios. The transfection efficiency of the L92-pDMAEMA copolymer was by far greater than that of the PEO-pDMAEMA copolymer. An extra added Pluronic P123 further increased the transfecton efficacy of L92-pDMAEMA, but did not affect that of PEO-pDMAEMA.     

Conjugation of arginine-glycine-aspartic acid peptides to poly(ethylene oxide)-b-poly(epsilon-caprolactone) micelles for enhanced intracellular drug delivery to metastatic tumor cells

An arginine-glycine-aspartic acid (RGD) containing model peptide was conjugated to the surface of poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) micelles as a ligand that can recognize adhesion molecules overexpressed on the surface of metastatic cancer cells, that is, integrins, and that can enhance the micellar delivery of encapsulated hydrophobic drug into a tumor cell. Toward this goal, PEO-b-PCL copolymers bearing acetal groups on the PEO end were synthesized, characterized, and assembled to polymeric micelles. The acetal group on the surface of the PEO-b-PCL micelles was converted to reactive aldehyde under acidic condition at room temperature. An RGD-containing linear peptide, GRGDS, was conjugated on the surface of the aldehyde-decorated PEO-b-PCL micelles by incubation at room temperature. A hydrophobic fluorescent probe, that is, DiI, was physically loaded in prepared polymeric micelles to imitate hydrophobic drugs loaded in micellar carrier. The cellular uptake of DiI loaded GRGDS-modified micelles by melanoma B16-F10 cells was investigated at 4 and 37 degrees C by fluorescent spectroscopy and confocal microscopy techniques and was compared to the uptake of DiI loaded valine-PEO-b-PCL micelles (as the irrelevant ligand decorated micelles) and free DiI. GRGDS conjugation to polymeric micelles significantly facilitated the cellular uptake of encapsulated hydrophobic DiI most probably by intergrin-mediated cell attachment and endocytosis. The results indicate that acetal-terminated PEO-b-PCL micelles are amenable for introducing targeting moieties on the surface of polymeric micelles and that RGD-peptide conjugated PEO-b-PCL micelles are promising ligand-targeted carriers for enhanced drug delivery to metastatic tumor cells.     

Methoxy poly(ethylene glycol)-block-poly(delta-valerolactone) copolymer micelles for formulation of hydrophobic drugs

Six amphiphilic diblock copolymers based on methoxy poly(ethylene glycol) (MePEG) and poly(delta-valerolactone) (PVL) with varying hydrophilic and hydrophobic block lengths were synthesized via a metal-free cationic polymerization method. MePEG-b-PVL copolymers were synthesized using MePEG with Mn = 2000 or Mn = 5000 as the macroinitiator. 1H NMR and GPC analyses confirmed the synthesis of diblock copolymers with relatively narrow molecular weight distributions (Mn/Mw = 1.05-1.14). DSC analysis revealed that the melting temperatures (Tm) of the copolymers (47-58 degrees C) approach the Tm of MePEG as the PVL content is decreased. MePEG-b-PVL copolymer aggregates loaded with the hydrophobic anti-cancer drug paclitaxel were found to have effective mean diameters ranging from 31 to 970 nm depending on the composition of the copolymers. A MePEG-b-PVL copolymer of a specific composition was found to form drug-loaded micelles of 31 nm in diameter with a narrow size distribution and improve the apparent aqueous solubility of paclitaxel by more than 9000-fold. The biological activity of paclitaxel formulated in the MePEG-b-PVL micelles was confirmed in human MCF-7 breast and A2780 ovarian cancer cells. Furthermore, the biocompatibility of the copolymers was established in CHO-K1 fibroblast cells using a cell viability assay. The in vitro hydrolytic and enzymatic degradation of the micelles was also evaluated over a period of one month. The present study indicates that the MePEG-b-PVL copolymers are suitable biomaterials for hydrophobic drug formulation and delivery.     

Solubilization of docetaxel in poly(ethylene oxide)-block-poly(butylene/styrene oxide) micelles

Poly(ethylene oxide)-block-poly(styrene oxide) (PEO-b-PSO) and PEO-b-poly(butylene oxide) (PEO-b-PBO) of different chain lengths were synthesized and characterized for their self-assembling properties in water by dynamic/static light scattering, spectrofluorimetry, and transmission electron microscopy. The resulting polymeric micelles were evaluated for their ability to solubilize and protect the anticancer drug docetaxel (DCTX) from degradation. The drug release kinetics as well as the cytotoxicity of the loaded micelles were assessed in vitro. All polymers formed micelles with a highly viscous core at low critical association concentrations (<10 mg/L). Micelle morphology depended on the nature of the hydrophobic block, with PBO- and PSO-based micelles yielding monodisperse spherical and cylindrical nanosized aggregates, respectively. The maximum solubilization capacity for DCTX ranged from 0.7 to 4.2% and was the highest for PSO micelles exhibiting the longest hydrophobic segment. Despite their high affinity for DCTX, PEO-b-PSO micelles were not able to efficiently protect DCTX against hydrolysis under accelerated stability testing conditions. Only PEO-b-PBO bearing 24 BO units afforded significant protection against degradation. In vitro, DCTX was released slower from the latter micelles, but all formulations possessed a similar cytotoxic effect against PC-3 prostate cancer cells. These data suggest that PEO-b-P(SO/BO) micelles could be used as alternatives to conventional surfactants for the solubilization of taxanes.     

Protein partitioning in aqueous two-phase systems composed of a pH-responsive copolymer and poly(ethylene glycol)

The effect of pH and salt concentration on the partitioning behavior of bovine serum albumin (BSA) and cytochrome c in an aqueous two-phase polymer system containing a novel pH-responsive copolymer that mimics the structure of proteins and poly(ethylene glycol) (PEG) was investigated. The two-phase system has low viscosity. Depending on pH and salt concentration, the cytochrome c was found to preferentially partition into the pH-responsive copolymer-rich (bottom) phase under all conditions of pH and salt concentrations considered in the study. This was caused by the attraction between the positively charged protein and negatively charged copolymer. BSA partitioning showed a more complex behavior and partitioned either to the PEG phase or copolymer phase depending on the pH and ionic strength. Extremely high partitioning levels (partition coefficient of 0.004) and very high separation ratios of the two proteins (up to 48) were recorded in the new systems. This was attributed to strong electrostatic interactions between the proteins and the charged copolymer.     

Phosphorylcholine-based pH-responsive diblock copolymer micelles as drug delivery vehicles: light scattering, electron microscopy, and fluorescence experiments

The micellization behavior of a diblock copolymer comprising a highly hydrophilic and biocompatible poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) corona-forming block and a pH-sensitive poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) core-forming block (PMPC-b-PDPA) has been studied by static and dynamic light scattering (SDLS), transmission electron microscopy (TEM), and potentiometry. Self-assembly of PMPC-b-PDPA copolymers with two different DPA volume fractions (phi(DPA)) leads to narrowly distributed and structurally distinct spherical micelles, as evidenced by their molecular weight (M(w,mic)), aggregation number (N(agg)), hydrodynamic radius (R(H)), corona width (W), and core radius (R(c)). The excellent potential of these pH-responsive micelles as nanosized drug delivery vehicles was illustrated by the encapsulation of dipyridamole (DIP), a model hydrophobic drug that dissolves in acid solutions and becomes insoluble above pH 5.8, which is comparable to the pK(a) of the PDPA block. The influence of micelle structure (namely M(w,mic), N(agg), R(H), W, and R(c)) on drug loading content, drug loading efficiency, partition coefficient, and release kinetics was investigated and confirmed by fluorescence spectroscopy studies. The maximum dipyridamole loadings within PMPC(30)-b-PDPA(30) (R(H) = 14.0 nm; W = 4.8 nm; R(c) = 9.2 nm) and PMPC(30)-b-PDPA(60) (R(H) = 27.1 nm; W = 11.0 nm; R(c) = 16.1 nm) micelles were 7 and 12% w/w(p), respectively. This preferential solubilization of DIP into micelles formed by copolymer chains having longer core-forming blocks (i.e., possessing larger core volumes) reflects the larger partition coefficient (K(V)) of DIP between the aqueous phase and PMPC(30)-b-PDPA(60) micelles (K(V) = 5.7 x 10(4)) compared to PMPC(30)-b-PDPA(30) micelles (K(V) = 1.1 x 10(4)). This enhanced ability of PMPC(30)-b-PDPA(60) aggregates to entrap/stabilize small hydrophobic molecules also produces slower release kinetics. Rapid release can be triggered by lowering the pH to induce micellar dissociation.     

Cross-linked nanoassemblies from poly(ethylene glycol)-poly(aspartate) block copolymers as stable supramolecular templates for particulate drug delivery

Block copolymer cross-linked nanoassemblies (CNAs) were developed as stable supramolecular templates for particulate drug delivery. Poly(ethylene glycol)-poly(aspartate) [PEG-p(Asp)] block copolymers, consisting of PEG (5 or 12 kDa) and Asp (5, 14, 25, 33, and 37 repeating units), were used as scaffolds and grafts in combination to prepare a nanoassembly library of grafted nanoassemblies (GNAs) and CNAs. Four synthesis routes were tested to maximize the number of drug-binding Asp units per nanoassembly. Grafting-onto-scaffold and grafting-from-scaffold methods were used for GNA synthesis. Either partially or completely deprotected PEG-p(Asp) was cross-linked with diamine compounds to prepare CNAs. (1)H NMR and GPC measurements showed that GNAs and CNAs contained the maximum 183 and 253 Asp units, respectively. Initial screening of the nanoassemblies revealed that GNAs would be impractical for further development as drug carriers due to variable grafting efficiency and low product yields. CNAs were obtained in high yields and identified as a promising supramolecular template that can entrap and release ionizable drugs (doxorubicin), enhancing the particle stability of nanoassemblies in the pharmaceutically relevant pH ranges between 4 and 9. Light scattering measurements demonstrated that the particle size of CNAs remained uniform before and after drug entrapment, causing neither aggregation nor dissociation (<5 mg/mL).     

Biodegradable polymeric nanospheres formed by temperature-induced phase transition in a mixture of poly(lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer

The mixture of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer(F-127) and PLGA (poly(lactide-co-gycolide)) forms a liquid state above their phase transition temperatures, and the phase-separated state is induced by decreasing the temperature below the phase transition temperature. On the basis of the temperature-induced phase transition behavior in the mixture of F-127 and PLGA, a novel method for the preparation of drug-loaded PLGA nanospheres was designed and characterized by measuring the loading amount, the encapsulation efficiency, and the drug release pattern. Paclitaxel, used as a potent anticancer drug, was selected as a model drug.     

Self-assembled micelles of biodegradable triblock copolymers based on poly(ethyl ethylene phosphate) and poly(-caprolactone) as drug carriers

A series of novel amphiphilic triblock copolymers of poly(ethyl ethylene phosphate) and poly(-caprolactone) (PEEP-PCL-PEEP) with various PEEP and PCL block lengths were synthesized and characterized. These triblock copolymers formed micelles composed of a hydrophobic core of poly(-caprolactone) (PCL) and a hydrophilic shell of poly(ethyl ethylene phosphate) (PEEP) in aqueous solution. The micelle morphology was spherical, determined by transmission electron microscopy. It was found that the size and critical micelle concentration values of the micelles depended on both hydrophobic PCL block length and PEEP hydrophilic block length. The in vitro degradation characteristics of the triblock copolymers were investigated in micellar form, showing that these copolymers were completely biodegradable under enzymatic catalysis of Pseudomonas lipase and phosphodiesterase I. These triblock copolymers were used for paclitaxel (PTX) encapsulation to demonstrate the potential in drug delivery. PTX was successfully loaded into the micelles, and the in vitro release profile was found to be correlative to the polymer composition. These biodegradable triblock copolymer micelles are potential as novel carriers for hydrophobic drug delivery.     

Micropatterns of cell adhesive proteins with poly(ethylene oxide)-block-Poly(4-vinylpyridine) diblock copolymer

Control of cell shape and behavior through the micropattern technique by spatial immobilization of adhesive proteins on a surface has provided novel insights in several aspects of cell biology, such as tissue morphogenesis, cell growth and cell differentiation, and apoptosis. In this work, we present the use of poly(ethylene oxide-block-poly(4-vinylpyridine) (PEO-b-P4VP) as a non-adhesive background to construct micropatterns of cell adhesive proteins. In the method presented, PEO-b-P4VP is used for its antifouling properties and at the same time, as a photosensitive material to define the micropatterns. The irradiation of PEO-b-P4VP with a short wavelength UV light through photolithographic mask, causes the polymer to crosslink and immobilize in the areas exposed. In the areas non-exposed the polymer can be removed. These areas can be subsequent back filled with the adhesive protein of interest to produce the final micropatterned cell chips.     

Improvement of retroviral vectors by coating with poly(ethylene glycol)-poly(L-lysine) block copolymer (PEG-PLL)

BACKGROUND: Although some cationic reagents, such as polybrene, improve gene transduction in vitro, their use in vivo is prohibited due to their toxicity to the exposed cells. This paper demonstrates that a new cationic reagent, poly(ethylene glycol)-poly(L-lysine) block copolymer (PEG-PLL), improves gene transduction with retroviral vectors without increasing cell toxicity. METHODS: A retroviral vector derived from the Moloney leukemia virus, containing the lacZ gene, was modified with PEG-PLL prior to transduction into NIH3T3, Lewis lung carcinoma, and primary cultured mouse brain cells. LacZ transduction efficacy was evaluated by counting the number of X-Gal-positive cells. RESULTS: We have demonstrated that PEG-PLL is able to stably modify the viral particle surface due to the affinity of the PEG moiety to the biomembrane, and neutralizes negative charges by the cationic nature of the poly-lysine residue. Thus, PEG-PLL increased the gene transduction efficiency and minimized cell toxicity because free PEG-PLL was removable by centrifugation. We have shown that PEG-PLL increased the viral gene transduction efficiency 3- to 7-fold with NIH3T3 or Lewis lung carcinoma cell lines without increasing cytotoxicity. It improved retroviral gene transduction efficacy even against labile cells, such as primary cultured brain cells. CONCLUSIONS: PEG-PLL is a novel reagent that improves retroviral gene transduction efficacy without increasing cytotoxicity.     

Bioreducible micelles self-assembled from amphiphilic hyperbranched multiarm copolymer for glutathione-mediated intracellular drug delivery

A new type of biodegradable micelles for glutathione-mediated intracellular drug delivery was developed on the basis of an amphiphilic hyperbranched multiarm copolymer (H40-star-PLA-SS-PEP) with disulfide linkages between the hydrophobic polyester core and hydrophilic polyphosphate arms. The resulting copolymers were characterized by nuclear magnetic resonance (NMR), Fourier transformed infrared (FTIR), gel permeation chromatography (GPC), and differential scanning calorimeter (DSC) techniques. Benefiting from amphiphilic structure, H40-star-PLA-SS-PEP was able to self-assemble into micelles in aqueous solution with an average diameter of 70 nm. Moreover, the hydrophilic polyphosphate shell of these micelles could be detached under reduction-stimulus by in vitro evaluation, which resulted in a rapid drug release due to the destruction of micelle structure. The glutathione-mediated intracellular drug delivery was investigated against a Hela human cervical carcinoma cell line. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements demonstrated that H40-star-PLA-SS-PEP micelles exhibited a faster drug release in glutathione monoester (GSH-OEt) pretreated Hela cells than that in the nonpretreated cells. Cytotoxicity assay of the doxorubicin-loaded (DOX-loaded) micelles indicated the higher cellular proliferation inhibition against 10 mM of GSH-OEt pretreated Hela cells than that of the nonpretreated ones. As expected, the DOX-loaded micelles showed lower inhibition against 0.1 mM of buthionine sulfoximine (BSO) pretreated Hela cells. These reduction-responsive and biodegradable micelles show a potential to improve the antitumor efficacy of hydrophobic chemotherapeutic drugs.     

Cellular internalization of PCL(20)-b-PEO(44) block copolymer micelles

The cellular internalization of polycaprolactone-b-poly(ethylene oxide) (PCL(20)-b-PEO(44)) copolymer micelles were investigated in PC12 cells cultures. The micelles were found to be internalized into PC12 cells when followed over the 4-h incubation period. Also, the internalization process was found to fulfill the basic criteria for endocytotic uptake in that it was time, temperature, pH and energy dependent. In addition, the use of other pharmacological manipulations (hypertonic treatment, Brefeldin A) provide further evidence that the mode of cellular internalization is in fact endocytotic.     

PEG-SS-PPS: reduction-sensitive disulfide block copolymer vesicles for intracellular drug delivery

Under appropriate conditions, block copolymeric macroamphiphiles will self-assemble in water to form vesicles, referred to as polymersomes. We report here polymersomes that can protect biomolecules in the extracellular environment, are taken up by endocytosis, and then suddenly burst within the early endosome, releasing their contents prior to exposure to the harsh conditions encountered after lysosomal fusion. Specifically, block copolymers of the hydrophile poly(ethylene glycol) (PEG) and the hydrophobe poly(propylene sulfide) (PPS) were synthesized with an intervening disulfide, PEG17-SS-PPS30. Polymersomes formed from this block copolymer were demonstrated to disrupt in the presence of intracellular concentrations of cysteine. In cellular experiments, uptake, disruption, and release were observed within 10 min of exposure to cells, well within the time frame of the early endosome of endolysosomal processing. This system may be useful in cytoplasmic delivery of biomolecular drugs such as peptides, proteins, oligonucleotides, and DNA.     

Synthesis and characterization of biodegradable poly(ethylene glycol)-block-poly(5-benzyloxy-trimethylene carbonate) copolymers for drug delivery

Amphiphilic diblock copolymers with various block compositions were synthesized with monomethoxy-terminated poly(ethylene glycol) (MePEG) as the hydrophilic block and poly(5-benzyloxy-trimethylene carbonate) (PBTMC) as the hydrophobic block. When the copolymerization was conducted using MePEG as a macroinitiator and stannous 2-ethylhexanoate (Sn(Oct)2) as a catalyst, the molecular weight of the second block was uncontrollable, and the method only afforded a mixture of homopolymer and copolymer with a broad molecular weight distribution. By contrast, the use of the triethylaluminum-MePEG initiator yielded block copolymers with controllable molecular weight and a more narrow molecular weight distribution than the copolymers obtained using Sn(Oct)2. GPC and 1H NMR studies confirmed that the macroinitiator was consumed and the copolymer composition was as predicted. Two of the newly synthesized MePEG-b-PBTMC copolymers were evaluated in terms of properties primarily relating to their use in micellar drug delivery. MePEG-b-PBTMC micelles with a narrow monomodal size distribution were prepared using a high-pressure extrusion technique. The MePEG-b-PBTMC copolymers were also confirmed to be biodegradable and noncytotoxic.