Sub-micron particle behaviour and capture at an immuno-sensor surface in an ultrasonic standing wave

The capture of 200 nm biotinylated latex beads from suspensions of concentration 10(7) to 2.5 x 10(8) particle/ml on an immuno-coated surface of the acoustic reflector in an ultrasound standing wave (USW) resonator has been studied while the acoustic pathlength was less than one half wavelength (lambda/2). The particles were delivered to the reflector's surface by acoustically induced flow. The capture dependencies on suspension concentration, duration of experiments and acoustic pressure have been established at 1.09, 1.46 and 1.75 MHz. Five-fold capture increase has been obtained at 1.75 MHz in comparison to the control (no ultrasound) situation. The contrasting behaviours of 1, 0.5 and 0.2 mum fluorescent latex beads in a lambda/4 USW resonator at 1.46 MHz have been characterized. The particle movements were observed with an epi-fluorescent microscope and the velocities of the particles were measured by particle image velocimetry (PIV). The experiments showed that whereas the trajectories of 1 mum particles were mainly affected by the direct radiation force, 0.5 mum particles were influenced both by the radiation force and acoustic streaming. The 0.2 mum latex beads followed acoustic streaming in the chamber and were not detectably affected by the radiation force. The streaming-associated behaviour of the 200 nm particles has implications for enhanced immunocapture of viruses and macromolecules (both of which are also too small to experience significant acoustic radiation force).     

Three-Dimensional Mid-Air Acoustic Manipulation by Ultrasonic Phased Arrays

The essence of levitation technology is the countervailing of gravity. It is known that an ultrasound standing wave is capable of suspending small particles at its sound pressure nodes. The acoustic axis of the ultrasound beam in conventional studies was parallel to the gravitational force, and the levitated objects were manipulated along the fixed axis (i.e. one-dimensionally) by controlling the phases or frequencies of bolted Langevin-type transducers. In the present study, we considered extended acoustic manipulation whereby millimetre-sized particles were levitated and moved three-dimensionally by localised ultrasonic standing waves, which were generated by ultrasonic phased arrays. Our manipulation system has two original features. One is the direction of the ultrasound beam, which is arbitrary because the force acting toward its centre is also utilised. The other is the manipulation principle by which a localised standing wave is generated at an arbitrary position and moved three-dimensionally by opposed and ultrasonic phased arrays. We experimentally confirmed that expanded-polystyrene particles of 0.6 mm, 1 mm, and 2 mm in diameter could be manipulated by our proposed method.     

Sub-micron particle manipulation in an ultrasonic standing wave: Applications in detection of clinically important biomolecules

Separation of particles from the suspending phase is of interest, among others, to clinical analysts. A system that enables manipulation of sub-micron sized particles in suspensions of analytical scale volume (10–50 l) using a non-cavitating ultrasonic standing wave is described. Particle suspensions, contained in glass capillary tubes of 1–2 mm internal dimension, are treated on the axis of a tubular transducer generating a radial standing wave field at 4.5 MHz. Microparticles (of average diameter range 0.3–10 m) suspended in buffer are concentrated within seconds at preferred regions separated by submillimetre distances. Concentration of suspended latex particles was inhibited in solutions containing protein at levels similar to those occurring in clinical specimens when the suspensions were sonicated in capillaries of circular cross-section. This effect was associated with acoustic streaming of the suspending fluid. Silica microparticles (more dense and less compressible than latex) could be concentrated in the presence of streaming. Latex particles concentrated readily in square cross-section capillaries where no streaming was observed. With sub-micron particles, the geometry of the sample chamber, the suspending phase composition and the size, density and compressibility of the microparticles all influence particle manipulation. The radial standing wave system has been used to enhance agglutination of antibody-coated latex microparticles in the presence of antigen allowing rapid and highly sensitive detection of clinically important biomolecules. The sensitivity of conventional diagnostic tests for microbial antigen has been improved by application of ultrasound and clinical utility has been demonstrated, in particular, for detection of meningitis-causing bacteria.     

Dynamic Response of Model Lipid Membranes to Ultrasonic Radiation Force

Low-intensity ultrasound can modulate action potential firing in neurons in vitro and in vivo. It has been suggested that this effect is mediated by mechanical interactions of ultrasound with neural cell membranes. We investigated whether these proposed interactions could be reproduced for further study in a synthetic lipid bilayer system. We measured the response of protein-free model membranes to low-intensity ultrasound using electrophysiology and laser Doppler vibrometry. We find that ultrasonic radiation force causes oscillation and displacement of lipid membranes, resulting in small (<1%) changes in membrane area and capacitance. Under voltage-clamp, the changes in capacitance manifest as capacitive currents with an exponentially decaying sinusoidal time course. The membrane oscillation can be modeled as a fluid dynamic response to a step change in pressure caused by ultrasonic radiation force, which disrupts the balance of forces between bilayer tension and hydrostatic pressure. We also investigated the origin of the radiation force acting on the bilayer. Part of the radiation force results from the reflection of the ultrasound from the solution/air interface above the bilayer (an effect that is specific to our experimental configuration) but part appears to reflect a direct interaction of ultrasound with the bilayer, related to either acoustic streaming or scattering of sound by the bilayer. Based on these results, we conclude that synthetic lipid bilayers can be used to study the effects of ultrasound on cell membranes and membrane proteins.     

Application of ultrasound to selectively localize nanodroplets for targeted imaging and therapy

Lipid-coated perfluorocarbon nanodroplets are submicrometer-diameter liquid-filled droplets with proposed applications in molecularly targeted therapeutics and ultrasound (US) imaging. Ultrasonic molecular imaging is unique in that the optimal application of these agents depends not only on the surface chemistry, but also on the applied US field, which can increase receptor-ligand binding and membrane fusion. Theory and experiments are combined to demonstrate the displacement of perfluorocarbon nanoparticles in the direction of US propagation, where a traveling US wave with a peak pressure on the order of megapascals and frequency in the megahertz range produces a particle translational velocity that is proportional to acoustic intensity and increases with increasing center frequency. Within a vessel with a diameter on the order of hundreds of micrometers or larger, particle velocity on the order of hundreds of micrometers per second is produced and the dominant mechanism for droplet displacement is shown to be bulk fluid streaming. A model for radiation force displacement of particles is developed and demonstrates that effective particle displacement should be feasible in the microvasculature. In a flowing system, acoustic manipulation of targeted droplets increases droplet retention. Additionally, we demonstrate the feasibility of US-enhanced particle internalization and therapeutic delivery.     

Viscous effects in the acoustic manipulation of algae for biofuel production

Microalgae are emerging as a promising source for environmentally friendly biofuels. Acoustic manipulation of algal cells using standing waves is a relatively new method for dewatering and/or sorting algae harvests. Recent work in the field has shown that acoustic dewatering methods may be more efficient and economical than traditional methods. Optimization of acoustic algal cell manipulation requires a knowledge of the acoustic radiation force upon the cells. Previous work in the field does not account for viscosity of the algal cells or surrounding fluid. We have implemented inviscid and viscous acoustic force models for standing waves incident upon algal cells in salt and freshwater. The results presented in this paper show that significant viscous effects can occur at certain frequencies and/or cell sizes and may need to be taken into account in the development of efficient experimental techniques.     

Microwave-induced thermoelastic pressure wave propagation in the cat brain

This paper presents direct measurements of acoustic pressure wave propagation in cat brains irradiated with pulsed 2.45-GHz microwaves. Short rectangular microwave pulses (2 microseconds, 15 kW peak power) were applied singly through a direct-contact applicator located at the occipital pole of a cat's head. Acoustic pressure waves were detected by using a small hydrophone transducer, which was inserted stereotaxically into the brain of an anesthetized animal through a matrix of holes drilled on the skull. The measurements clearly indicate that pulsed microwaves induce acoustic pressure waves which propagate with an acoustic wave velocity of 1523 m/s.     

Mechanobiological modulation of cytoskeleton and calcium influx in osteoblastic cells by short-term focused acoustic radiation force

Mechanotransduction has demonstrated potential for regulating tissue adaptation in vivo and cellular activities in vitro. It is well documented that ultrasound can produce a wide variety of biological effects in biological systems. For example, pulsed ultrasound can be used to noninvasively accelerate the rate of bone fracture healing. Although a wide range of studies has been performed, mechanism for this therapeutic effect on bone healing is currently unknown. To elucidate the mechanism of cellular response to mechanical stimuli induced by pulsed ultrasound radiation, we developed a method to apply focused acoustic radiation force (ARF) (duration, one minute) on osteoblastic MC3T3-E1 cells and observed cellular responses to ARF using a spinning disk confocal microscope. This study demonstrates that the focused ARF induced F-actin cytoskeletal rearrangement in MC3T3-E1 cells. In addition, these cells showed an increase in intracellular calcium concentration following the application of focused ARF. Furthermore, passive bending movement was noted in primary cilium that were treated with focused ARF. Cell viability was not affected. Application of pulsed ultrasound radiation generated only a minimal temperature rise of 0.1°C, and induced a streaming resulting fluid shear stress of 0.186 dyne/cm(2), suggesting that hyperthermia and acoustic streaming might not be the main causes of the observed cell responses. In conclusion, these data provide more insight in the interactions between acoustic mechanical stress and osteoblastic cells. This experimental system could serve as basis for further exploration of the mechanosensing mechanism of osteoblasts triggered by ultrasound.     

Integration of Acoustic Radiation Force and Optical Imaging for Blood Plasma Clot Stiffness Measurement

Despite the life-preserving function blood clotting serves in the body, inadequate or excessive blood clot stiffness has been associated with life-threatening diseases such as stroke, hemorrhage, and heart attack. The relationship between blood clot stiffness and vascular diseases underscores the importance of quantifying the magnitude and kinetics of blood’s transformation from a fluid to a viscoelastic solid. To measure blood plasma clot stiffness, we have developed a method that uses ultrasound acoustic radiation force (ARF) to induce micron-scaled displacements (1-500 μm) on microbeads suspended in blood plasma. The displacements were detected by optical microscopy and took place within a micro-liter sized clot region formed within a larger volume (2 mL sample) to minimize container surface effects. Modulation of the ultrasound generated acoustic radiation force allowed stiffness measurements to be made in blood plasma from before its gel point to the stage where it was a fully developed viscoelastic solid. A 0.5 wt % agarose hydrogel was 9.8-fold stiffer than the plasma (platelet-rich) clot at 1 h post-kaolin stimulus. The acoustic radiation force microbead method was sensitive to the presence of platelets and strength of coagulation stimulus. Platelet depletion reduced clot stiffness 6.9 fold relative to platelet rich plasma. The sensitivity of acoustic radiation force based stiffness assessment may allow for studying platelet regulation of both incipient and mature clot mechanical properties.     

Spore and micro-particle capture on an immunosensor surface in an ultrasound standing wave system

The capture of Bacillus subtilis var. niger spores on an antibody-coated surface can be enhanced when that coated surface acts as an acoustic reflector in a quarter wavelength ultrasonic (3 MHz) standing wave resonator. Immunocapture in such a resonator has been characterised here for both spores and 1 microm diameter biotinylated fluorescent microparticles. A mean spatial acoustic pressure amplitude of 460 kPa and a frequency of 2.82 MHz gave high capture efficiencies. It was shown that capture was critically dependent on reflector thickness. The time dependence of particle deposition on a reflector in a batch system was broadly consistent with a calculated time of 35 s to bring 95% of particles to the coated surface. A suspension flow rate of 0.1 ml/min and a reflector thickness of 1.01 mm gave optimal capture in a 2 min assay. The enhancement of particle detection compared with the control (no ultrasound) situation was x 70. The system detects a total of five particles in 15 fields of view in a 2 min assay when the suspending phase concentration was 10(4) particles/ml. A general expression for the dependence of minimum concentration detectable on; number of fields examined, sample volume flowing through the chamber and assay time shows that, for a practical combination of these variables, the threshold detection concentration can be two orders of magnitude lower.     

Quantification of risk from fetal exposure to diagnostic ultrasound

Biomedical ultrasound may induce adverse effects in patients by either thermal or non-thermal means. Temperatures above normal can adversely affect biological systems, but effects also may be produced without significant heating. Thermally induced teratogenesis has been demonstrated in many animal species as well as in a few controlled studies in humans. Various maximum ‘safe’ temperature elevations have been proposed, although the suggested values range from 0.0 to 2.5° C. Factors relevant to thermal effects are considered, including the nature of the acoustic field in situ, the state of perfusion of the embryo/fetus, and the variation of sensitivity to thermal insult with gestational stage of development. Non-thermal mechanisms of action considered include acoustic cavitation, radiation force, and acoustic streaming. While cavitation can be quite destructive, it is extremely unlikely in the absence of stabilized gas bodies, and although the remaining mechanisms may occur in utero, they have not been shown to induce adverse effects. For example, pulsed, diagnostic ultrasound can increase fetal activity during exposure, apparently due to stimulation of auditory perception by radiation forces on the fetal head or auditory structures. In contrast, pulsed ultrasound also produces vascular damage near developing bone in the late-gestation mouse, but by a unknown mechanism and at levels above current US FDA output limits. It is concluded that: (1) thermal rather than nonthermal mechanisms are more likely to induce adverse effects in utero, and (2) while the probability of an adverse thermal event is usually small, under some conditions it can be disturbingly high.     

Acoustic radiation force on a long cylinder,and potential sound transduction by tomato trichomes

Acoustic transduction by plants has been proposed as a mechanism to enable just-in-time up-regulation of metabolically expensive defensive compounds. Although the mechanisms by which this “hearing” occurs are unknown, mechanosensation by elongated plant hair cells known as trichomes is suspected. To evaluate this possibility, we developed a theoretical model to evaluate the acoustic radiation force that an elongated cylinder can receive in response to sounds emitted by animals, including insect herbivores, and applied it to the long, cylindrical stem trichomes of the tomato plant Solanum lycopersicum. Based on perturbation theory and validated by finite element simulations, the model quantifies the effects of viscosity and frequency on this acoustic radiation force. Results suggest that acoustic emissions from certain animals, including insect herbivores, may produce acoustic radiation force sufficient to trigger stretch-activated ion channels.     

Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles

Acoustophoresis refers to the displacement of suspended objects in response to directional forces from sound energy. Given that the suspended objects must be smaller than the incident wavelength of sound and the width of the fluidic channels are typically tens to hundreds of micrometers across, acoustofluidic devices typically use ultrasonic waves generated from a piezoelectric transducer pulsating at high frequencies (in the megahertz range). At characteristic frequencies that depend on the geometry of the device, it is possible to induce the formation of standing waves that can focus particles along desired fluidic streamlines within a bulk flow. Here, we describe a method for the fabrication of acoustophoretic devices from common materials and clean room equipment. We show representative results for the focusing of particles with positive or negative acoustic contrast factors, which move towards the pressure nodes or antinodes of the standing waves, respectively. These devices offer enormous practical utility for precisely positioning large numbers of microscopic entities (e.g., cells) in stationary or flowing fluids for applications ranging from cytometry to assembly.     

Ultrasonic deposition of cells on a surface

Bacteria in water have been driven to a glass surface by an ultrasonic standing wave. On an antibody coated surface capture of Bacillus subtilis var niger (BG) spores (6.6 x 10(6) ml(-1)) was increased more than 200-fold over above the efficiency in the absence of ultrasound. In microfluidic (non-turbulent) systems detection of particles by sensors operating at a surface is diffusion limited. This results in very low detection abilities particularly for particles with diameters greater than 1 microm. Ultrasound is used here to drive bacterial spores to a wall and overcome this limitation. The results confirm: (1) pressure nodes can be formed close to the water-glass interface when the glass thickness is near half the ultrasonic wavelength; (2) the antibody used was able to capture spores in the presence of an ultrasonic standing wave.     

Improvement in separation characteristics of protein precipitates by acoustic conditioning

The effect of acoustic conditioning on the particle size distribution of isoelectric and calcium-ion-precipitated soya protein has been examined in low-residence-time chambers. In a previous study a beat frequency of 5 Hz obtained using a dual-source system of opposing vibrators was determined as giving optimal improvement in particle-settling characteristics for isoelectric soya protein precipitate. In this study the effect of amplitude of vibration, a measure of acoustic power input, and residence time of acoustic conditioning has been examined.Acoustic power input changed the flow pattern in the conditioning chamber from laminar streamline flow to a well-mixed, turbulent pattern. Such a mixing effect promoted the rapid aggregation of fine particles, a process that was modeled on the basis of orthokinetically controlled collisions. The rate of removal of fine particles due to acoustic conditioning was shown to be proportional to a mixing effect that was releated to the acoustic power dissipated per unit volume.The consequences of fine-particle aggregation on the centrifugal recovery of the precipitate are discussed.     

Fluid and solid mechanics in a poroelastic network induced by ultrasound

We made a theoretical analysis on the fluid and solid mechanics in a poroelastic medium induced by low-power ultrasound. Using a perturbative approach, we were able to linearize the governing equations and obtain analytical solutions. We found that ultrasound could propagate in the medium as a mechanical wave, but would dissipate due to frictional forces between the fluid and the solid phase. The amplitude of the wave depends on the ultrasonic power input. We applied this model to the problem of drug delivery to soft biological tissues by low-power ultrasound and proposed a mechanism for enhanced drug penetration. We have also found the coexistence of two acoustic waves under certain circumstances and pointed out the importance of very accurate experimental determination of the high-frequency properties of brain tissue.     

Swimming Using Surface Acoustic Waves

Microactuation of free standing objects in fluids is currently dominated by the rotary propeller, giving rise to a range of potential applications in the military, aeronautic and biomedical fields. Previously, surface acoustic waves (SAWs) have been shown to be of increasing interest in the field of microfluidics, where the refraction of a SAW into a drop of fluid creates a convective flow, a phenomenon generally known as SAW streaming. We now show how SAWs, generated at microelectronic devices, can be used as an efficient method of propulsion actuated by localised fluid streaming. The direction of the force arising from such streaming is optimal when the devices are maintained at the Rayleigh angle. The technique provides propulsion without any moving parts, and, due to the inherent design of the SAW transducer, enables simple control of the direction of travel.     

Concurrent Visualization of Acoustic Radiation Force Displacement and Shear Wave Propagation with 7T MRI

Manual palpation is a common and very informative diagnostic tool based on estimation of changes in the stiffness of tissues that result from pathology. In the case of a small lesion or a lesion that is located deep within the body, it is difficult for changes in mechanical properties of tissue to be detected or evaluated via palpation. Furthermore, palpation is non-quantitative and cannot be used to localize the lesion. Magnetic Resonance-guided Focused Ultrasound (MRgFUS) can also be used to evaluate the properties of biological tissues non-invasively. In this study, an MRgFUS system combines high field (7T) MR and 3 MHz focused ultrasound to provide high resolution MR imaging and a small ultrasonic interrogation region (~0.5 x 0.5 x 2 mm), as compared with current clinical systems. MR-Acoustic Radiation Force Imaging (MR-ARFI) provides a reliable and efficient method for beam localization by detecting micron-scale displacements induced by ultrasound mechanical forces. The first aim of this study is to develop a sequence that can concurrently quantify acoustic radiation force displacements and image the resulting transient shear wave. Our motivation in combining these two measurements is to develop a technique that can rapidly provide both ARFI and shear wave velocity estimation data, making it suitable for use in interventional radiology. Secondly, we validate this sequence in vivo by estimating the displacement before and after high intensity focused ultrasound (HIFU) ablation, and we validate the shear wave velocity in vitro using tissue-mimicking gelatin and tofu phantoms. Such rapid acquisitions are especially useful in interventional radiology applications where minimizing scan time is highly desirable.     

Theory of the acoustic instability and behavior of the phase velocity of acoustic waves in a weakly ionized plasma

The amplification of acoustic waves due to the transfer of thermal energy from electrons to the neutral component of a glow discharge plasma is studied theoretically. It is shown that, in order for acoustic instability (sound amplification) to occur, the amount of energy transferred should exceed the threshold energy, which depends on the plasma parameters and the acoustic wave frequency. The energy balance equation for an electron gas in the positive column of a glow discharge is analyzed for conditions typical of experiments in which acoustic wave amplification has been observed. Based on this analysis, one can affirm that, first, the energy transferred to neutral gas in elastic electron-atom collisions is substantially lower than the threshold energy for acoustic wave amplification and, second, that the energy transferred from electrons to neutral gas in inelastic collisions is much higher than that transferred in elastic collisions and thus may exceed the threshold energy. It is also shown that, for amplification to occur, there should exist some heat dissipation mechanism more efficient than gas heat conduction. It is suggested that this may be convective radial mixing within a positive column due to acoustic streaming in the field of an acoustic wave. The features of the phase velocity of sound waves in the presence of acoustic instability are investigated.     

Breakdown of immobilisation/separation and morphology changes of yeast suspended in water-rich ethanol mixtures exposed to ultrasonic plane standing waves

Some physiological/morphological changes have been reported before, when suspended yeasts have been irradiated with well-defined ultrasonic standing, as well as propagating, plane waves around 2.2 MHz, as used in ultrasonic coagulation, e.g., for cell filtering. Thus we used yeast as a biological model to explore the reasons for both those morphology changes and some unusual macroscopic behaviour in the case of water-rich ethanol mixtures when used as carrier liquid. When the cells were suspended in 12% (v/v) ethanol–water mixture separation was greatly reduced; the yeast cells were not retained in the pressure nodal planes of the standing wave, but mixed turbulently through the separation system. How this behaviour alters the efficiency of retention/immobilisation was measured. As the viability of the yeast was decreased as well the morphology of the cells was examined using transmission electron microscopy. Two effects, according to the type of assessment, were evident; a disruption of the cells vacuole and also damage to the cell wall/membrane complex. The extent of the alterations in vacuole structure with sonication time, utilising a fluorescent vacuole membrane dye, was measured. Transient cavitation was not detected and thus could be excluded as being responsible for the observed effects. Other possible reasons for the disruption of the intracellular compartments may be acoustic pressure, displacement or other, secondary effects like (sub) harmonic cavitation. The investigations contribute to a better understanding of the physical conditions experienced when a cell is stressed in a high-frequency ultrasonic wave in the MHz range.