Nanostructured metal coatings on polymers increase osteoblast attachment

Bioactive coatings are in high demand to increase the functions of cells for numerous medical devices. The objective of this in vitro study was to characterize osteoblast (bone-forming cell) adhesion on several potential orthopedic polymeric materials (specifically, polyetheretherketone, ultra-high molecular weight polyethylene, and polytetrafluoroethylene) coated with either titanium or gold using a novel Ionic Plasma Deposition process which creates a surface-engineered nanostructure (with features below 100 nm). Results demonstrated that compared to currently-used titanium and uncoated polymers, polymers coated with either titanium or gold using Ionic Plasma Deposition significantly increased osteoblast adhesion. Qualitative cell morphology results supported quantitative adhesion results as increased osteoblast cell spreading was observed on coated polymers compared to uncoated polymers. In this manner, this in vitro study strongly suggests that Ionic Plasma Deposition should be further studied for creating nanometer surface features on a wide variety of materials to enhance osteoblast functions necessary for orthopedic applications.     

Multifunctional peptide fibrils for biomedical materials

The Ile-Lys-Val-Ala-Val (IKVAV) containing peptide, A208 (AASIKVAVSADR, mouse laminin alpha1 chain 2097-2108), was recently found to form amyloid-like fibrils. Fibril formation is critical for its biological activities, including promotion of cell adhesion and neurite outgrowth. In the present study, we designed multifunctional peptide fibrils using the A208 peptide and an Arg-Gly-Asp (RGD)-containing fibronectin active sequence for biomedical applications. The fibronectin active sequence GRGDS (FN) or a scrambled sequence RSGGD (SC) were conjugated to either A208 or to A208S (AASVVIAKSADR), a scrambled peptide of A208, with a glycine as a spacer. The FN-A208 and SC-A208 peptides formed a gel and were stained with Congo red similar to that of A208, but FN-A208S and SC-A208S did not form a gel. These results indicate that FN-A208 and SC-A208 form amyloid-like fibrils similar to A208. A208 and SC-A208 promoted cell attachment with filopodia formation, and this adhesion was inhibited by the IKVAV-containing peptide, but not by EDTA or a GRGDS peptide. FN-A208 promoted cell attachment with well-organized actin stress fibers, and this adhesion was partially inhibited by either EDTA, GRGDS, or IKVAV. These data suggest that A208 binds to only IKVAV receptor(s) while the FN-A208 interacts with both integrins and the IKVAV receptor(s). We conclude that multifunctional peptide fibrils can be designed by conjugation of active peptides on A208 and that this construct has potential to serve as a bioadhesive for tissue regeneration and engineering.     

Enhanced osteoblast adhesion to drug-coated anodized nanotubular titanium surfaces

Current orthopedic implants have functional lifetimes of only 10-15 years due to a variety of reasons including infection, extensive inflammation, and overall poor osseointegration (or a lack of prolonged bonding of the implant to juxtaposed bone). To improve properties of titanium for orthopedic applications, this study anodized and subsequently coated titanium with drugs known to reduce infection (penicillin/streptomycin) and inflammation (dexamethasone) using simple physical adsorption and the deposition of such drugs from simulated body fluid (SBF). Results showed improved drug elution from anodized nanotubular titanium when drugs were coated in the presence of SBF for up to 3 days. For the first time, results also showed that the simple physical adsorption of both penicillin/streptomycin and dexamethasone on anodized nanotubular titanium improved osteoblast numbers after 2 days of culture compared to uncoated unanodized titanium. In addition, results showed that depositing such drugs in SBF on anodized titanium was a more efficient method to promote osteoblast numbers compared to physical adsorption for up to 2 days of culture. In addition, osteoblast numbers increased on anodized titanium coated with drugs in SBF for up to 2 days of culture compared to unanodized titanium. In summary, compared to unanodized titanium, this preliminary study provided unexpected evidence of greater osteoblast numbers on anodized titanium coated with either penicillin/streptomycin or dexamethasone using simple physical adsorption or when coated with SBF; results which suggest the need for further research on anodized titanium orthopedic implants possessing drug-eluting nanotubes.     

Effect of synthetic polycation polyallylamine on adhesion and viability of CHL V-79 RJK Chinese hamster fibroblasts with various heat resistance

The effects of synthetic polycation polyallylamine (PAA) on the adhesion of CHL V-79 RJK fibroblasts and CHL V-79 RJK40 cells resistant to 40°C and the attachment of these cells to polycation immobilized on a polystyrene surface have been studied. We also investigated PAA cytotoxicity. It was shown that cell adhesion on polystyrene plastic coated with PAA depended on the PAA dose and did not depend on the heat resistance of the cells. The effect of PAA on cell adhesion to uncoated polystyrene surface after cell exposure to PAA depended not only on the polycation concentration but also on cell heat resistance. Pretreatment of cells with nontoxic concentrations of PAA inhibited CHL V-79 RJK cell adhesion and did not change adhesive properties of thermotolerant cells. PAA is toxic for CHL V-79 RJK and CHL V-79 RJK40 cells only at concentration of 100 μg/ml (MTT assay). PAA-induced acute toxicity was accompanied by necrotic-like cell death. Possible mechanisms of the PAA effect on the behavior of cells with different metabolic characteristics defined by heat resistance are discussed.     

Poly(styrenesulfonate)/poly(allylamine) multilayers: a route to favor endothelial cell growth on expanded poly(tetrafluoroethylene) vascular grafts

Small-diameter synthetic vascular grafts of expanded poly(tetrafluoroethylene) (ePTFE) polymer concern one of the most common alternatives for the replacement of diseased vessels. However, high failure rates arise especially due to the lack of endothelial cells (ECs). EC seeding was developed to build a monolayer on the luminal surface. Because ECs show little or no adhesion on synthetic prostheses, it is necessary to promote their retention. On ePTFE surfaces we successfully deposited polyelectrolyte multilayer films (PMFs) consisting of poly(ethylenimine) (PEI), poly(sodium 4-styrenesulfonate) (PSS), and poly(allylamine hydrochloride) (PAH) to obtain PEI-(PSS-PAH)3 films. EC adhesion and spreading on modified ePTFE were assessed by scanning electron and confocal microscopies. Cell viability was evaluated by Alamar Blue assay. After 7 days of culture, the ePTFE modified with PMF exhibited improvements of EC viability as compared to that of the controls (nonmodified ePTFE) or even ePTFE coated by a PAH monolayer (p < 0.05). Moreover, the spreading of ECs was largely enhanced compared to that of the same controls, resulting in a healthy confluent cell monolayer formation. Positive staining for the von Willebrand factor confirmed the EC phenotype. Promoting EC attachment and function on ePTFE modified with PMFs could become in the future a promising treatment for synthetic small-diameter vascular grafts.     

Amphiphilic cationic peptides mediate cell adhesion to plastic surfaces

Four amphiphilic peptides, each with net charges of +2 or more at neutrality and molecular weights under 4 kilodaltons, were found to mediate the adhesion of normal rat kidney fibroblasts to polystyrene surfaces. Two of these peptides, a model for calcitonin (peptide 1, MCT) and melittin (peptide 2, MEL), form amphiphilic alpha-helical structures at aqueous/nonpolar interfaces. The other two, a luteinizing hormone-releasing hormone model (peptide 3, LHM) and a platelet factor model (peptide 4, MPF) form beta-strand structures in amphiphilic environments. Although it contains only 10 residues, LHM mediated adhesion to surfaces coated with solutions containing as little as 10 pmoles/ml of peptide. All four of these peptides were capable of forming monolayers at air-buffer interfaces with collapse pressures greater than 20 dynes/cm. None of these four peptides contains the tetrapeptide sequence Arg-Gly-Asp-Ser, which has been associated with fibronectin-mediated cell adhesion. Ten polypeptides that also lacked the sequence Arg-Gly-Asp-Ser but were nonamphiphilic and/or had net charges less than +2 at neutrality were all incapable of mediating cell adhesion (Pierschbacher and Ruoslahti, 1984). The morphologies of NRK cells spread on polystyrene coated with peptide LHM resemble the morphologies on fibronectin-coated surfaces, whereas cells spread on surfaces coated with MCT or MEL exhibit strikingly different morphologies. The adhesiveness of MCT, MEL, LHM, and MPF implies that many amphiphilic cationic peptides could prove useful as well defined adhesive substrata for cell culture and for studies of the mechanism of cell adhesion.     

Multilayer rat hepatocyte aggregates formed on expanded polytetrafluoroethylene surface

Feasibility of using a macroporous membrane material, expanded polytetrafluoroethylene (ePTFE), for culturing hepatocytes on its surface was examined. Adult rat hepatocytes were attached to an ePTFE surface and cultured in a hormonally defined medium supplemented with or without fetal calf serum (FCS, 10%) or bovine serum albumin (BSA, 0.03–3%). When cultured in a FCS-suplemented medium, hepatocytes reorganized themselves into multilayer cell aggregates on an ePTFE surface. The morphological characteristics of hepatocytes were influenced by the modification of the ePTFE surface as well as the culture medium. Hepatocytes cultured on a polyvinylalcohol (PVA)-coated ePTFE surface formed many more multilayer cell aggregates than those cultured on an uncoated ePTFE surface. Such highly multilayered hepatocyte aggregates were also noted when the cells were cultivated in a BSA-supplemented medium. On the other hand, when cultured in a FCS- or BSA-free medium, hepatocytes formed cell monolayers on both PVA-coated and uncoated ePTFE surfaces as did the cells on a collagen-coated polystyrene surface. The hepatocytes in the aggregates exhibited high albumin expression capability and low DNA synthesis rate as compared with those in monolayer cultures. The multilayer hepatocyte aggregates, as immobilized on a PVA-coated ePTFE surface in a serum-supplemented medium, are shown to be not only morphologically, but functionally differentiated, and will provide us a model system for the development of a bioreactor using hepatocytes, particularly for a hybrid-type artificial liver. This revised version was published online in June 2006 with corrections to the Cover Date.     

The all-D-configuration segment containing the IKVAV sequence of laminin A chain has similar activities to the all-L-peptide in vitro and in vivo.

Laminin is a basement membrane glycoprotein that has diverse biological activities. A sequence on the A chain containing IKVAV (Ile-Lys-Val-Ala-Val) has been shown to promote neurite outgrowth, cell adhesion, and tumor growth and metastasis. Here we have determined the structural requirements of this synthetic peptide for biological activity. Twelve-amino acid-long all-L- (LAM-L) and all-D-peptide (LAM-D) segments as well as an alternating D- and L-amino acid-containing peptide (LAM-DL), which included the IKVAV sequence (residues 2097-2108), were synthesized. Circular dichroism spectral analysis revealed a mirror image conformation of LAM-D and LAM-L with mainly beta-sheet and to a minor extent alpha-helical structure. LAM-DL did not exhibit any significant ordered conformational features. LAM-D and LAM-L showed similar cell attachment activities for rat pheochromocytoma cells (PC12), whereas LAM-DL was inactive. A peptide analog with randomized IKVAV sequence (LAM-RM) was also inactive. A similar trend was observed in competition experiments of the four peptides with laminin in analogous cell attachment assays. In in vivo experiments, both LAM-D and LAM-L were capable of increasing tumor growth when subcutaneously injected into mice with murine melanoma cells B16F10. Results indicate that the conformational status of the IKVAV domain is a contributing factor in determining the biological activity but that there is no strict requirement for a specific chirality. There is a likely sequence specificity to the IKVAV region.     

自组装IKVAV多肽纳米纤维支架凝胶及其对嗅鞘细胞的作用

旨在观察自组装IKVAV多肽纳米纤维支架凝胶对鼠嗅鞘细胞(OECs)的作用。通过调整IKVAV溶液pH值并加入培养液触发多肽自组装为支架凝胶, 用原子力显微镜检测IKVAV分子可以自组装成编织状纳米纤维(直径为3~5 nm)。采用原代分离培养方法获得OECs单细胞悬液后, 使用差速贴壁法两次纯化OECs且在第12天通过免疫染色计数OECs纯度为85%。将IKVAV多肽纳米纤维支架凝胶与OECs复合培养, 倒置显微镜下观察OECs生长良好, Calcein-AM/PI活、死细胞染色表明活细胞数达95%。CCK-8法间接细胞计数证实IKVAV多肽可促进OECs的黏附, 对OECs增殖没有影响。由此可见IKVAV多肽可以自组装成纳米纤维支架凝胶且对OECs有良好的生物相容性及黏附作用, 可作为神经组织工程支架材料。     

The effect of synthetic polycation polyallylamine on adhesion and viability of CHL V-79 RJK Chinese hamster fibroblasts with different heat resistance

The effects of synthetic polycation polyallylamine (PAA) on adhesion of CHL V-79 RJK fibroblasts and CHL V-79 RJK40 cells resistant to 40 degrees C, and attachment to these cells to polycation immobilized on polystyrene surface were studied. We have also investigated the cytotoxicity of PAA. It was shown that cell adherence to polystyrene plastic coated with PAA was enhanced or decreased in dependence of the PAA concentration used for surface coating and did not depend on heat resistance of investigated cell lines. The effect of PAA on cell adhesion to uncoated polystyrene surface after cell exposure with PAA depended not only on the polycation concentration, but also on the extent of heat resistance of investigated cell lines. Pretreatment of CHL V-79 RJK cells with PAA at the nontoxic concentrations led to inhibition of cell adhesion, and no change in adhesive properties of thermoresistant cells was found under the same conditions. PAA was toxic for CHL V-79 RJK and CHL V-79 RJK40 cells only at concentrations of 100 microg/ml (MTT assay). PAA-induced acute toxicity was accompanied by necrotic-like cell damage. Possible mechanisms of the PAA effect on the behaviour of cells with different structural and metabolic characteristics that are due to the temperature of cell cultivation are discussed.     

Prostaglandin E2 receptor modulation affects tumor cell adhesion to laminin.

We have shown previously that murine mammary adenocarcinoma cells both synthesize prostaglandin E2 (PGE2) and have a high affinity receptor for this ligand. Modulation of either PGE synthesis or PGE receptor function changes the metastatic potential of these cells. Because of the importance of laminin and laminin receptors to the metastatic process, we asked whether or not the PGE receptor participates in tumor cell-laminin interactions. As has been reported for many other tumor cells, laminin and the laminin-derived peptide PA22-2, containing the sequence IKVAV, mediate attachment of line 410.4 mammary tumor cells in vitro. We now demonstrate that the attachment of 410.4 cells to laminin or peptide PA22-2 was significantly inhibited by three PGE receptor antagonists, LE0101, SC19220, and sodium meclofenamate. LE0101 was most active, inhibiting tumor cell adhesion in a dose-dependent manner in the absence of nonspecific toxicity. These receptor antagonists had no effect on the PA22-2-mediated attachment of a PGE receptor negative tumor cell line, except at the highest concentration of LE0101 tested. No inhibition of adhesion to Type I collagen was seen. These results indicate that the PGE2 receptor modulates tumor cell adhesion to laminin which may subsequently affect the in vivo process of metastasis.     

Cells,growth factors and bioactive surface properties in a mechanobiological model of implant healing

Interface conditions are of prime importance for implant fixation in the early post-operative period and modelling of specific biochemical interactions at implant surface is still missing. We hypothesized that updating osteoblast adhesion properties and growth factor source in an active zone located at the implant surface was relevant to model biochemical interactions of implant with its environment. We proposed an innovative set of diffusive–convective–reactive equations which relevant parameters were the cell decay factor, the cell motility and the growth factor balance.Initial comparison with histomorphometic results from a stable PMMA canine implant model provided an encouraging base to implement a numerical sensitivity analysis to evaluate the role of three types of bioactive surfaces: acid-etched titanium, coarse grit-blasted acid-etched titanium and coarse grit-blasted acid-etched titanium with RGDS peptide. We found that cell diffusion decrease (acid-etched+RGDS peptide vs. PMMA), and increase of local growth factor fraction (PMMA vs. acid-etched+RGDS peptide), significantly improved the amount of mineralized tissue on the implant surface. When the variation of structural fraction to cell motility and growth factor synthesis was investigated, an envelope pattern with an optimum was obtained but this could be exceeded for strong surface modifications and/or for high growth factor concentrations. The model also confirmed that implant bioactive properties should play a limited role to reduce heterogeneity of new-formed tissue. In conclusion, we suggested that our innovative theoretical approach was relevant to investigate implant fixation and could potentially help in reduction of implant revision.     

Collagen type I together with fibronectin provide a better support for endothelialization

Endothelialization of vascular implants is limited by the inability of cells to retain adhesion when exposed to flow. Extracellular matrix proteins, including fibronectin and collagen, enhance cell adherence on materials. This study investigated the behaviour of Human Umbilical Vein Endothelial Cells (HUVEC) on extracellular matrix coated polystyrene. Collagen and fibronectin were coated as single and double layers to analyse differences in cell proliferation, morphology, and cell-protein interactions. Significantly higher endothelial cell proliferation and migration rates were observed on the collagen and collagen+fibronectin coating compared to the uncoated or fibronectin-coated sample. Immmunofluorescent microscopy showed evidence of extracellular matrix remodelling in the double, collagen+fibronectin coating. These results strongly suggest that a double coating of collagen+fibronectin provides a better support structure for endothelial cell growth and contributes to improve the ability of vascular implants to become and remain endothelialized.     

Alterations in the adhesion behavior of osteoblasts by titanium particle loading: inhibition of cell function and gene expression

Total joint replacement prostheses are required to withstand corrosive environments and sustain millions of loading and articulation cycles during their term of implantation. Wear debris generation has been implicated as one of the primary causes of periprosthetic osteolysis and subsequent implant loosening in total joint replacements. Particulate debris consisting of metals, polyethylene, ceramics, and bone cement have each been shown to provoke a biological response in joint tissues. The major cell types within the interfacial granulomatous fibrous tissues consist of fibroblasts, macrophages, lymphocytes, and foreign-body giant cells. Osteoblasts are one of the principal cell types in the bone tissue adjacent to prostheses, maintaining physiologic bone remodeling through the balanced coordination of bone formation and resorption in concert with osteoclasts. To date the phenomenon of osteoblast phagocytosis of titanium particles has been suggested, but has not been sufficiently studied or confirmed. This study seeks to clarify the influence of titanium particles on osteoblast adhesion, deformability, proliferation, and gene expression profile. These studies were accomplished by performing biorheological testing, Northern blot analysis and RNase protection assay. The uptake of metallic particles by the osteoblast resulted in a particle-filament complex formation, which induced a series of variations in cell function. Understanding these variations is critical to expanding our knowledge of implant loosening and elucidating the nature of prosthetic joint failure. This study suggests that the impact of titanium particles on osteoblast function and subsequent implant loosening may have been previously underestimated.     

In vitro assays for adhesion and migration of osteoblastic cells (Saos-2) on titanium surfaces

The first event occurring at the boundary between a metal implant and living tissue is the attachment of cells onto the metal surface of the implant. The attachment characteristics of the metal in this situation are critical in determining its biocompatibility and usefulness as artificial bone and tooth implants. Using the human osteosarcoma cell line Saos-2, we attempted to establish simple and reliable methods for evaluating the attachment of cultured osteoblastic cells onto titanium samples that had been subjected to various surface treatments. Fluorescence actin imaging showed that cells cultured on titanium with hydrofluoric acid etching (HF-Ti) exhibited delayed spreading of their cytoplasm, as compared to cells cultured for the same length of time on nitrided titanium or physically polished titanium. The HF-Ti-cultured cells also exhibited poor assembly of focal contacts, as visualized by vinculin immunofluorescence. Furthermore, in motility assays based on an in vitro wound model, cells cultured on HF-Ti migrated more slowly than cells cultured on other titanium surfaces. These data suggest that Saos-2 cells attach less effectively to the HF-Ti surface. The methods described in this study should be useful for assessing the initial interactions of cultured cells with various materials, including metals.S.G. is the recipient of a grant awarded to foreign students by the government of Japan. This study was supported by the Integrated Center for Science (INCS) at Ehime University.     

Effect of extracellular matrix proteins on in vitro testosterone production by rat Leydig cells

The aim of this study was to detect the effect of extracellular matrix (ECM) proteins on rat Leydig cell shape, adhesion, expression of integrin subunits and testosterone production, in vitro. Leydig cells isolated from adult rats were cultured on plates uncoated or coated with different concentrations of laminin-1, fibronectin, or type IV collagen in the presence or absence of hCG for 3 or 24 hr. A significant increase of cell adhesion and of alpha3, alpha5, and beta1 integrin subunit expression was observed when cells were cultured on ECM proteins, compared to those grown on uncoated plates. Leydig cells cultured on glass coverslips coated with ECM proteins for 24 hr exhibited elongated shapes with long cell processes (spreading), while cells cultured on uncoated plates showed few cell processes. A significant decrease in testosterone production was observed when basal and hCG-stimulated Leydig cells were cultured for 3 or 24 hr on plates coated with type IV collagen (12 and 24 microg/cm(2)) compared to uncoated plates. A significant though a slighter decrease in testosterone production was also observed in cells cultured on plates coated with fibronectin (12 and 24 microg/cm(2)), compared to uncoated plates. Laminin-1 did not modify testosterone production under basal or hCG stimulated conditions. These results suggest that ECM proteins are able to modulate Leydig cell steroidogenesis, in vitro.     

Osteoblast Behavior on Hierarchical Micro-/Nano-Structured Titanium Surface

In the present work, osteoblast behavior on a hierarchical micro-/nano-structured titanium surface was investigated. A hierarchical hybrid micro-/nano-structured titanium surface topography was produced via Electrolytic Etching (EE). MG-63 cells were cultured on disks for 2 h to 7 days. The osteoblast response to the hierarchical hybrid micro-/nano-structured titanium surface was evaluated through the osteoblast cell morphology, attachment and proliferation. For comparison, MG-63 cells were also cultured on Sandblasted and Acid-etched (SLA) as well as Machined (M) surfaces respectively. The results show significant differences in the adhesion rates and proliferation levels of MG-63 cells on EE, SLA, and M surfaces. Both adhesion rate and proliferation level on EE surface are higher than those on SLA and M surfaces. Therefore, we may expect that, comparing with SLA and M surfaces, bone growth on EE surface could be accelerated and bone formation could be promoted at an early stage, which could be applied in the clinical practices for immediate and early-stage loadings.     

Mechanics and electrostatics of the interactions between osteoblasts and titanium surface

Due to oxidation and adsorption of chloride and hydroxyl anions, the surface of titanium (Ti) implants is negatively charged. A possible mechanism of the attractive interaction between the negatively charged Ti surface and the negatively charged osteoblasts is described theoretically. It is shown that adhesion of positively charged proteins with internal charge distribution may give rise to attractive interaction between the Ti surface and the osteoblast membrane. A dynamic model of the osteoblast attachment is presented in order to study the impact of geometrically structured Ti surfaces on the osteoblasts attachment. It is indicated that membrane-bound protein complexes (PCs) may increase the membrane protrusion growth between the osteoblast and the grooves on titanium (Ti) surface and thereby facilitate the adhesion of osteoblasts to the Ti surface. On the other hand, strong local adhesion due to electrostatic forces may locally trap the osteoblast membrane and hinder the further spreading of osteointegration boundary. We suggest that the synergy between these two processes is responsible for successful osteointegration along the titanium surface implant.     

Improving Osteoblast Response In Vitro by a Nanostructured Thin Film with Titanium Carbide and Titanium Oxides Clustered around Graphitic Carbon

Introduction

Recently, we introduced a new deposition method, based on Ion Plating Plasma Assisted technology, to coat titanium implants with a thin but hard nanostructured layer composed of titanium carbide and titanium oxides, clustered around graphitic carbon. The nanostructured layer has a double effect: protects the bulk titanium against the harsh conditions of biological tissues and in the same time has a stimulating action on osteoblasts.

Results

The aim of this work is to describe the biological effects of this layer on osteoblasts cultured in vitro. We demonstrate that the nanostructured layer causes an overexpression of many early genes correlated to proteins involved in bone turnover and an increase in the number of surface receptors for α3β1 integrin, talin, paxillin. Analyses at single-cell level, by scanning electron microscopy, atomic force microscopy, and single cell force spectroscopy, show how the proliferation, adhesion and spreading of cells cultured on coated titanium samples are higher than on uncoated titanium ones. Finally, the chemistry of the layer induces a better formation of blood clots and a higher number of adhered platelets, compared to the uncoated cases, and these are useful features to improve the speed of implant osseointegration.

Conclusion

In summary, the nanostructured TiC film, due to its physical and chemical properties, can be used to protect the implants and to improve their acceptance by the bone.     

Design of a synthetic adhesion protein by grafting RGD tailed cyclic peptides on bovine serum albumin

A synthetic adhesion protein was designed by chemical grafting of the RGD tailed cyclic peptide cyclo[-d-Val-Arg-Gly-Asp-Glu(-Ahx-Tyr-Cys-NH₂)-] on the carrier protein bovine serum albumin (BSA). The cyclic conformation of the RGD motif grafted on the protein mimics the conformation of the motif displayed in native adhesion proteins such as fibronectin. The adhesion of the cells on polystyrene coated with the conjugate BSA–peptide was similar or even better than the one obtained when the proadhesive protein fibronectin was coated on the plates. Results also indicated that covalent coupling of the peptide on BSA is not absolutely required, since simple adsorption of the peptide on the protein coated on plates was efficient for enhancing cell adhesion. These results show that polystyrene support can be reconditioned with conformationally constrained RGD peptides to enhance cell adhesion on solid supports. The same methodology can be adapted for the development of new biomaterials based on the recognition of specific peptides.