Selectivity and delignification kinetics for oxidative short‐term lime pretreatment of poplar wood,part I: Constant‐pressure

Kinetic models applied to oxygen bleaching of paper pulp focus on the degradation of polymers, either lignin or carbohydrates. Traditionally, they separately model different moieties that degrade at three different rates: rapid, medium, and slow. These models were successfully applied to lignin and carbohydrate degradation of poplar wood submitted to oxidative pretreatment with lime at the following conditions: temperature 110–180°C, total pressure 7.9–21.7 bar, and excess lime loading of 0.5 g Ca(OH)₂ per gram dry biomass. These conditions were held constant for 1–6 h. The models properly fit experimental data and were used to determine pretreatment selectivity in two fashions: differential and integral. By assessing selectivity, the detrimental effect of pretreatment on carbohydrates at high temperatures and at low lignin content was determined. The models can be used to identify pretreatment conditions that selectively remove lignin while preserving carbohydrates. Lignin removal ≥50% with glucan preservation ≥90% was observed for differential glucan selectivities between ～10 and ～30 g lignin degraded per gram glucan degraded. Pretreatment conditions complying with these reference values were preferably observed at 140°C, total pressure ≥14.7 bars, and for pretreatment times between 2 and 6 h depending on the total pressure (the higher the pressure, the less time). They were also observed at 160°C, total pressure of 14.7 and 21.7 bars, and pretreatment time of 2 h. Generally, at 110°C lignin removal is insufficient and at 180°C carbohydrates do not preserve well. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Lime pretreatment and enzymatic hydrolysis of corn stover

Corn stover was pretreated with an excess of calcium hydroxide (0.5 g Ca(OH)2/g raw biomass) in non-oxidative and oxidative conditions at 25, 35, 45, and 55 degrees C. The optimal condition is 55 degrees C for 4 weeks with aeration. Glucan (91.3%) and xylan (51.8%) were converted to glucose and xylose respectively, when the treated corn stover was enzymatically hydrolyzed with 15 FPU/g cellulose. Only 0.073 g Ca(OH)2 was consumed per g of raw corn stover. Of the initial lignin, 87.5% was maximally removed. Almost all acetyl groups were removed. After 4 weeks at 55 degrees C with aeration, some cellulose and hemicellulose were solubilized as monomers and oligomers in the pretreatment liquor. When considering the dissolved fragments of glucan and xylan in the pretreatment liquor, the overall yields of glucose and xylose were 93.2% and 79.5% at 15 FPU/g cellulose. The pretreatment liquor has no inhibitory effect on ethanol fermentation.     

Fungal decomposition of Abies needle and Betula leaf litter

The effect of litter type and incubation temperature on the ability of fungi to decompose leaf litter of subalpine trees was examined by a pure-culture test. Mass loss of Abies needle and Betula leaf litter and utilization patterns of lignin and carbohydrates were investigated under two temperature conditions (20 C and 10 C) and compared for 29 species in basidiomycetes, ascomycetes and zygomycetes. The decomposing ability was generally higher in basidiomycetes than in ascomycetes and zygomycetes. Mass loss (% original mass) of litter was higher in Betula than in Abies and higher at 20 C than at 10 C. The 29 fungi were divided into lignocellulose decomposers, cellulose decomposers and sugar fungi based on their substrate utilization in Abies and Betula litter. Mass loss of lignin and carbohydrates by lignocellulose and cellulose decomposers was higher in Betula than in Abies. Mass loss of carbohydrates was higher at 20 C than at 10 C, but the temperature did not influence mass loss of lignin, indicating lignin decomposition by fungi was less sensitive to temperature than carbohydrate decomposition. Lignin/carbohydrate loss ratio (L/C) of Collybia spp. that caused selective delignification was lower at 20 C than at 10 C. These results indicate that the decomposability of litter, lignin and carbohydrate was different between Abies and Betula and that temperature affected not only the rate at which fungi decompose litter but also the ability of fungi to use lignin and carbohydrates.     

Understanding the Physicochemical Characteristics and the Improved Enzymatic Saccharification of Corn Stover Pretreated with Aqueous and Gaseous Ammonia

Physicochemical characteristics of corn stover pretreated by soaking in aqueous ammonia (SAA) and low-moisture anhydrous ammonia (LMAA) were compared and investigated. The glucan digestibility of the treated biomass reached 90 % (SAA) and 84 % (LMAA). The LMAA pretreatment enhanced the digestibility by cleaving cross-linkages between cell wall components, whereas the SAA pretreatment additionally improved the digestibility by efficiently removing a major portion of the lignin under mild reaction conditions without significant loss of carbohydrates. Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and gel permeation chromatography (GPC) revealed the structural and chemical transformations of lignin during the pretreatments. Both pretreatments effectively cleaved ferulate cell wall cross-linking that is associated with the recalcitrance of grass lignocellulosics toward enzymatic saccharification. Extracted lignin from SAA pretreatment was extensively depolymerized but retained “native” character, as evidenced by the retention of β-ether linkages.     

Advanced biorefinery in lower termite-effect of combined pretreatment during the chewing process

Background

Currently the major barrier in biomass utilization is the lack of an effective pretreatment of plant cell wall so that the carbohydrates can subsequently be hydrolyzed into sugars for fermentation into fuel or chemical molecules. Termites are highly effective in degrading lignocellulosics and thus can be used as model biological systems for studying plant cell wall degradation.

Results

We discovered a combination of specific structural and compositional modification of the lignin framework and partial degradation of carbohydrates that occurs in softwood with physical chewing by the termite, Coptotermes formosanus, which are critical for efficient cell wall digestion. Comparative studies on the termite-chewed and native (control) softwood tissues at the same size were conducted with the aid of advanced analytical techniques such as pyrolysis gas chromatography mass spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy and thermogravimetry. The results strongly suggest a significant increase in the softwood cellulose enzymatic digestibility after termite chewing, accompanied with utilization of holocellulosic counterparts and an increase in the hydrolysable capacity of lignin collectively. In other words, the termite mechanical chewing process combines with specific biological pretreatment on the lignin counterpart in the plant cell wall, resulting in increased enzymatic cellulose digestibility in vitro. The specific lignin unlocking mechanism at this chewing stage comprises mainly of the cleavage of specific bonds from the lignin network and the modification and redistribution of functional groups in the resulting chewed plant tissue, which better expose the carbohydrate within the plant cell wall. Moreover, cleavage of the bond between the holocellulosic network and lignin molecule during the chewing process results in much better exposure of the biomass carbohydrate.

Conclusion

Collectively, these data indicate the participation of lignin-related enzyme(s) or polypeptide(s) and/or esterase(s), along with involvement of cellulases and hemicellulases in the chewing process of C. formosanus, resulting in an efficient pretreatment of biomass through a combination of mechanical and enzymatic processes. This pretreatment could be mimicked for industrial biomass conversion.     

川西高海拔增温和加氮对红杉凋落物有机组分释放的影响

对川西高山树线红杉新鲜凋落物中有机组分于11月进行自然条件(对照)、加氮(2 g N·m^-2)、增温(顶开式培养室)、加氮+增温4个处理的原位培养,并监测凋落物中有机组分的分解动态.结果表明: 在试验开始后4个月内,增温、加氮以及加氮+增温处理比对照显著促进了红杉凋落物中水溶性糖、水溶性酚和多酚的分解,但随着培养时间的延长,累积分解量的差异逐渐缩小.与对照相比,增温、加氮和增温+加氮处理均抑制红杉凋落物中CH₂Cl₂提取组分、酸溶碳水化合物、酸溶木质素和非酸溶木质素分解,其中增温处理抑制作用最强,加氮处理抑制效果最弱,增温+加氮处理介于二者之间;增温处理对非酸溶木质素和CH₂Cl₂提取组分的半分解周期延长1倍以上,热水溶组分的半分解周期延长50%以上.在原位培养条件下,红杉新鲜凋落物中水溶性糖、水溶性酚、多酚、酸溶碳水化合物、酸溶木质素是较容易分解的有机组分,半分解周期分别为182、159、127、154和190 d;热水溶组分、CH₂Cl₂提取组分和非酸溶木质素是较难分解的有机组分,半分解周期分别是209、302和318 d;尽管低温季节(11月至次年3月)极其寒冷,气温均低于0 ℃,常被认为是微生物活性最弱、有机物分解最慢的时期,但结果显示低温季节期间红杉凋落物各有机组分却分解最快.因此,氮沉降和升温将迟滞该区域高寒红杉林凋落物的分解.这将有利于高寒森林生态系统的土壤碳固持.     

Lignocellulose solubilization and conversion by extremely thermophilic Caldicellulosiruptor bescii improves by maintaining metabolic activity

The extreme thermophile Caldicellulosiruptor bescii solubilizes and metabolizes the carbohydrate content of lignocellulose, a process that ultimately ceases because of biomass recalcitrance, accumulation of fermentation products, inhibition by lignin moieties, and reduction of metabolic activity. Deconstruction of low loadings of lignocellulose (5 g/L), either natural or transgenic, whether unpretreated or subjected to hydrothermal processing, by C. bescii typically results in less than 40% carbohydrate solubilization. Mild alkali pretreatment (up to 0.09 g NaOH/g biomass) improved switchgrass carbohydrate solubilization by C. bescii to over 70% compared to less than 30% for no pretreatment, with two-thirds of the carbohydrate content in the treated switchgrass converted to acetate and lactate. C. bescii grown on high loadings of unpretreated switchgrass (50 g/L) retained in a pH-controlled bioreactor slowly purged (τ = 80 hr) with growth media without a carbon source improved carbohydrate solubilization to over 40% compared to batch culture at 29%. But more significant was the doubling of solubilized carbohydrate conversion to fermentation products, which increased from 40% in batch to over 80% in the purged system, an improvement attributed to maintaining the bioreactor culture in a metabolically active state. This strategy should be considered for optimizing solubilization and conversion of lignocellulose by C. bescii and other lignocellulolytic microorganisms.     

Biomass Production and Composition of Perennial Grasses Grown for Bioenergy in a Subtropical Climate Across Florida, USA

Carbohydrate and lignin composition of feedstock materials are major factors in determining their bioenergy potential. This study was conducted to quantify dry biomass yield and the carbohydrate and lignin composition of six potential biofuel grasses (elephantgrass, energycane, sweetcane, giant reed, giant miscanthus, and sugarcane) across three sites in Florida for plant (2009) and first ratoon (2010) crops. Dry biomass yields ranged from about 30 to 50 Mg ha^?1 and were generally greatest for elephantgrass, energycane, sweetcane, and sugarcane. Accordingly, total plant carbohydrate yields (20 to 25 Mg ha^?1) were comparable among sugarcane, energycane, sweetcane, and elephantgrass, but were generally less for giant reed and even less for giant miscanthus. However, the contribution of total extractable carbohydrates and total fiber carbohydrates to total plant carbohydrate yields differed among species. Sugarcane had the highest concentrations of extractable carbohydrates (219 to 356 mg g^?1), followed by energycane, then sweetcane, elephantgrass, and giant reed, with giant miscanthus having the lowest. Energycane and elephantgrass tended to have significantly more fiber glucose, and elephantgrass less xylose, than other species. Variability in total lignin concentrations on a fiber basis was relatively modest (250 to 285 mg g^?1) across species, but was generally highest in sweetcane and giant reed. Overall, elephantgrass and energycane were prime regional candidates for cellulosic conversion using fermentation processes due to high yields and favorable fiber characteristics, although energycane tended to have higher extractable carbohydrates.     

Hydrothermal pretreatment of sugarcane bagasse using response surface methodology improves digestibility and ethanol production by SSF

Sugarcane bagasse was characterized as a feedstock for the production of ethanol using hydrothermal pretreatment. Reaction temperature and time were varied between 160 and 200°C and 5–20 min, respectively, using a response surface experimental design. The liquid fraction was analyzed for soluble carbohydrates and furan aldehydes. The solid fraction was analyzed for structural carbohydrates and Klason lignin. Pretreatment conditions were evaluated based on enzymatic extraction of glucose and xylose and conversion to ethanol using a simultaneous saccharification and fermentation scheme. SSF experiments were conducted with the washed pretreated biomass. The severity of the pretreatment should be sufficient to drive enzymatic digestion and ethanol yields, however, sugars losses and especially sugar conversion into furans needs to be minimized. As expected, furfural production increased with pretreatment severity and specifically xylose release. However, provided that the severity was kept below a general severity factor of 4.0, production of furfural was below an inhibitory concentration and carbohydrate contents were preserved in the pretreated whole hydrolysate. There were significant interactions between time and temperature for all the responses except cellulose digestion. The models were highly predictive for cellulose digestibility (R ² = 0.8861) and for ethanol production (R ² = 0.9581), but less so for xylose extraction. Both cellulose digestion and ethanol production increased with severity, however, high levels of furfural generated under more severe pretreatment conditions favor lower severity pretreatments. The optimal pretreatment condition that gave the highest conversion yield of ethanol, while minimizing furfural production, was judged to be 190°C and 17.2 min. The whole hydrolysate was also converted to ethanol using SSF. To reduce the concentration of inhibitors, the liquid fraction was conditioned prior to fermentation by removing inhibitory chemicals using the fungus Coniochaeta ligniaria.     

Characterization and chemodynamics of plant constituents during maturation,senescence and humus genesis in spruce ecosystems

Spruce needles of different age, litter materials and soil samples from the L-, O-and A-horizons of a mor profile were analysed by temperature-programmed pyrolysis (Py) in combination with field ionization mass spectrometry (FIMS). The integrated Py-FI mass spectra give characteristic fingerprints of the biomaterials investigated. The application of principal component analysis to the mass spectral data results in a clear discrimination and classification of the samples reflecting the chemical modifications and transformations of organic matter by biochemical and biogeochemical processes. The chemical compositions are determined by processes such as enrichment and/or translocation of plant constituents (e.g. carbohydrates, lignin, lipids, suberin, and aliphatic polymers) during maturation and senescence of needles; amendment of new components; decomposition; selective preservation and humification processes in the soil environment.During needle maturation, major chemical changes include the decrease of carbohydrate content, condensation of lignin, and crosslinking of waxes. Senescent needles are characterized by lower contents of carbohydrates and lower yields of monomeric pyrolysis products from lignin. The contribution of different litter materials to the humus layer can be estimated by differences in chemical composition. During litter decomposition and humification on the forest floor, carbohydrate content decreases rapidly. The lignin content remains almost constant but some subunits are continuously oxidized. Wax material accumulates until the mechnical disintegration of the needle occurs. In the O-horizons polymeric aliphatic materials are enriched in humified plant remains. A constant increase of aryl-alkyl esters from suberin in the O-horizons is due to both root input and selective preservation. In general, mainly aliphatic polymers and aryl-alkyl esters accumulate during the genesis of mor profiles under conifers.     

Production of bioethanol from sugarcane bagasse using NH<Subscript>4</Subscript>OH-H<Subscript>2</Subscript>O<Subscript>2</Subscript> pretreatment and simultaneous saccharification and co-fermentation

In this study, we investigated the production of bioethanol from sugarcane bagasse (SCB) using an NH₄OH-H₂O₂ pretreatment and simultaneous saccharification and co-fermentation (SScF). Response surface methodology and a 2³ Box-Behnken design were used to evaluate the effect of different liquid mixture concentrations, liquid-to-solid ratios (LSRs) and pretreatment temperatures on the production of ethanol. The liquid mixture concentration and LSR significantly influenced the fermentation efficiency. Based on ridge max analysis, the following pretreatment conditions resulted in a fermentation efficiency of 95.79 ± 0.01%: liquid mixture concentration 53%, LSR 28, and a temperature of 63°C. A morphological analysis performed using scanning electron microscopy (SEM) and chemical characterization revealed that these pretreatment conditions were effective in disrupting the sugarcane fibers and removing lignin. Ethanol fermentation with the pretreated SCB using SScF in yeast SHY 07-1 resulted in an ethanol concentration of 14.65 ± 0.17 g/L, an ethanol yield of 0.48 ± 0.01 g/g, and an ethanol productivity of 0.12 ± 0.01 g/(L/h), which represents increases of 106.02, 89.98, and 107.02%, respectively, over the values obtained from SScF with untreated SCB.     

Microbial pretreatment of cotton stalks by solid state cultivation of Phanerochaete chrysosporium

White rot fungi degrade lignin and have biotechnological applications in conversion of lignocellulose to valuable products. Pretreatment is an important processing step to increase the accessibility of cellulosic material in plant biomass, impacting efficiency of subsequent hydrolysis and fermentation. This study investigated microbial pretreatment of cotton stalks by solid state cultivation (SSC) using Phanerochaete chrysosporium to facilitate the conversion into ethanol. The effects of substrate moisture content (M.C.; 65%, 75% and 80% wet-basis), inorganic salt concentration (no salts, modified salts without Mn(2+), modified salts with Mn(2+)) and culture time (0-14 days) on lignin degradation (LD), solids recovery (SR) and availability of carbohydrates (AOC) were examined. Moisture content significantly affected lignin degradation, with 75% and 80% M.C. degrading approximately 6% more lignin than 65% M.C. after 14 days. Within the same moisture content, treatments supplemented with salts were not statistically different than those without salts for LD and AOC. Within the 14day pretreatment, additional time resulted in greater lignin degradation, but indicated a decrease in SR and AOC. Considering cost, solid state cultivation at 75% M.C. without salts was the most preferable pretreatment resulting in 27.6% lignin degradation, 71.1% solids recovery and 41.6% availability of carbohydrates over a period of 14 days. Microbial pretreatment by solid state cultivation has the potential to be a low cost, environmentally friendly alternative to chemical approaches. Moisture relationships will be significant to the design of an effective microbial pretreatment process using SSC technology.     

The potential value of the seaweed Ceylon moss (Gelidium amansii) as an alternative bioenergy resource

Sea weed (Ceylon moss) possesses comparable bioenergy production potential to that of land plants. Ceylon moss has high content of carbohydrates, typically galactose (23%) and glucose (20%). We have explored the possibility of sodium chlorite in Ceylon moss pretreatment that can ultimately increase the efficiency of enzymatic saccharification. In an acidic medium, chlorite generates ClO₂ molecules that transform lignin into soluble compounds without any significant loss of carbohydrate content and this procedure is widely used as an analytical method for holocellulose determination. Sodium chlorite-pretreated samples resulted in glucose yield up to 70% with contrast of only 5% was obtained from non-pretreated samples.The efficiency of enzymatic hydrolysis is significantly improved by sodium chlorite pretreatment, and thus sodium chlorite pretreatment is potentially a very useful tool in the utilisation of Ceylon moss biomass for ethanol production or bioenergy purposes.     

Differential Effect of Denervation on Free-Radical Scavenging Enzymes in Slow and Fast Muscle of Rat

To determine the effect of denervation on the free-radical scavenging systems in relation to the mitochondrial oxidative metabolism in the slow-twitch soleus and fast-twitch extensor digitorum longus (EDL) muscles, the sciatic nerve of the rat was crushed in the midthigh region and the muscle tissue levels of five enzymes were studied 2 and 5 weeks following crush. Recently developed radioimmunoassays were utilized for the selective measurement of cuprozinc (cytosolic) and mangano (mitochondrial) superoxide dismutases. Total tissue content of cuprozinc superoxide dismutase showed a mild decrease after denervation in slow but not in fast muscle. Manganosuperoxide dismutase and fumarase decreased markedly at 2 weeks and returned toward control levels by 5 weeks, the changes appearing to be greater in slow than in fast muscle. At 2 weeks, cytochrome c oxidase decreased significantly in slow, but not in fast muscle. GSH-peroxidase at baseline was 10-fold higher in slow than in fast muscle, markedly decreased at 2 weeks in slow muscle, and returned toward control levels at 5 weeks, whereas the total enzyme activity in fast muscle did not change through 5 weeks. These data represent the first systematic report of free radical scavenging systems in slow and fast muscles in response to denervation. Selective modification of cuprozinc and manganosuperoxide dismutases and differential regulation of GSH-peroxidase was demonstrated in slow and fast muscle.     

Study of lignin biotransformation by Aspergillus fumigatus and white-rot fungi using (14)C-labeled and unlabeled kraft lignins

The biodegradation of lignin by fungi was studied in shake flasks using (14)C-labeled kraft lignin and in a deep-tank fermentor using unlabeled kraft lignin. Among the fungi screened, A. fumigatus-isolated in our laboratories-was most potent in lignin biotransformation. Dialysis-type fermentation, designed to study possible accumulation of low MW lignin-derived products, showed no such accumulation. Recalcitrant carbohydrates like mi-crocrystalline cellulose supported higher lignolytic activity than easily metabolized carbohydrates like cellobiose. An assay developed to distinguish between CO(2) evolved from lignin and carbohydrate substrates demonstrated no stoichiometric correlation between the metabolism of the two cosubstrates. The submerged fermentations with unlabeled lignin are difficult to monitor since chemical assays do not give accurate and true results. Lignolytic efficiencies that allowed monitoring of such fermentations were defined. Degraded lignins were analyzed for structural modifications. A. fumigatus was clearly superior to C. versicolor in all aspects of lignin degradation; A. fumigatus brought about substantial demethoxylation and dehydroxylation, whereas C. versicolor degraded lignins closely resembled undegraded kraft lignin. There was a good agreement among the different indices of lignin degradation, namely, (14)CO evolution, OCH(3) loss, OH loss, and monomer and dimer yield after permanganate oxidation.     

Pretreatment of hybrid poplar by aqueous ammonia

Enzymatic hydrolysis of hybrid poplar treated by ammonia recycle percolation (ARP) was studied applying cellulase enzyme supplemented with additional xylanase or pectinase. The effect of xylanase addition was much more significant than pectinase addition. Conversion of ARP‐treated hybrid poplar to ethanol was carried out by simultaneous saccharification and fermentation (SSF) and SS and cofermentation (SSCF). The maximum ethanol yield observed from the SSCF experiment was 78% of theoretical maximum based on the total carbohydrate (glucan + xylan). The same feedstock was also treated by soaking in aqueous ammonia (SAA), a batch pretreatment process with lower severity than ARP. The test results indicated that relatively high severity is required to attain acceptable level of digestibility of hybrid poplar. In order to lower the severity of the pretreatment, addition of H₂O₂ was attempted in the SAA. Addition of H₂O₂ significantly enhanced delignification of hybrid poplar due to its oxidative degradation of lignin. Several different H₂O₂ feeding schemes and different temperature profiles were attempted in operation of the SAA to investigate the effects of H₂O₂ on degradation of lignin and carbohydrates in hybrid poplar. More than 60% of lignin in hybrid poplar was removed with stepwise‐increase of temperature (60–120°C after 4h of reaction). Increase of carbohydrate degradation was also observed under this condition. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Enhancing alfalfa conversion efficiencies for sugar recovery and ethanol production by altering lignin composition

Alfalfa (Medicago sativa L.) biomass was evaluated for biochemical conversion into ethanol using dilute-acid and ammonia pretreatments. The two alfalfa lines compared were a reduced S-lignin transgenic cultivar generated through down regulation of the caffeic acid O-methyltransferase gene and a wild-type control. Both were harvested at two maturities. All the samples had similar carbohydrate contents including a mean composition of 316 g glucan and 497 g total neutral carbohydrates per kg dry biomass, which corresponds to a theoretic ethanol yield of 382 l/ton. Ethanol yields for alfalfa stems pretreated with dilute-acid were significantly impacted by harvest maturity and lignin composition, whereas when pretreated with dilute-ammonia, yield was solely affected by lignin composition. Use of a recombinant xylose-fermenting Saccharomyces strain, for converting the ammonia pretreated alfalfa samples, further increased ethanol yields. Ethanol yields for the xylose-fermenting yeast were 232-278 l/ton and were significantly enhanced for the reduced S lignin cultivars.     

Effect of structural features on enzyme digestibility of corn stover

Corn stover was pretreated with excess calcium hydroxide (0.5 g Ca(OH)2/g raw biomass) in non-oxidative and oxidative conditions at 25, 35, 45, and 55 degrees C. The enzymatic digestibility of lime-treated corn stover was affected by the change of structural features (acetylation, lignification, and crystallization) resulting from the treatment. Extensive delignification required oxidative treatment and additional consumption of lime (up to 0.17 g Ca(OH)2/g biomass). Deacetylation reached a plateau within 1 week and there were no significant differences between non-oxidative and oxidative conditions at 55 degrees C; both conditions removed approximately 90% of the acetyl groups in 1 week at all temperatures studied. Delignification highly depended on temperature and the presence of oxygen. Lignin and hemicellulose were selectively removed (or solubilized), but cellulose was not affected by lime pretreatment in mild temperatures (25-55 degrees C), even though corn stover was contacted with alkali for a long time, 16 weeks. The degree of crystallinity slightly increased from 43% to 60% with delignification because amorphous components (lignin, hemicellulose) were removed. However, the increased crystallinity did not negatively affect the 3-d sugar yield of enzymatic hydrolysis. Oxidative lime pretreatment lowered the acetyl and lignin contents to obtain high digestibility, regardless of crystallinity. The non-linear models for 3-d hydrolysis yields of glucan (Y(g)), xylan (Y(x)), and holocellulose (Y(gx)) were empirically established as a function of the residual lignin (L) for the corn stover pretreated with lime and air.     

Field testing of transgenic aspen from large greenhouse screening identifies unexpected winners

Trees constitute promising renewable feedstocks for biorefinery using biochemical conversion, but their recalcitrance restricts their attractiveness for the industry. To obtain trees with reduced recalcitrance, large-scale genetic engineering experiments were performed in hybrid aspen blindly targeting genes expressed during wood formation and 32 lines representing seven constructs were selected for characterization in the field. Here we report phenotypes of five-year old trees considering 49 traits related to growth and wood properties. The best performing construct considering growth and glucose yield in saccharification with acid pretreatment had suppressed expression of the gene encoding an uncharacterized 2-oxoglutarate-dependent dioxygenase (2OGD). It showed minor changes in wood chemistry but increased nanoporosity and glucose conversion. Suppressed levels of SUCROSE SYNTHASE, (SuSy), CINNAMATE 4-HYDROXYLASE (C4H) and increased levels of GTPase activating protein for ADP-ribosylation factor ZAC led to significant growth reductions and anatomical abnormalities. However, C4H and SuSy constructs greatly improved glucose yields in saccharification without and with pretreatment, respectively. Traits associated with high glucose yields were different for saccharification with and without pretreatment. While carbohydrates, phenolics and tension wood contents positively impacted the yields without pretreatment and growth, lignin content and S/G ratio were negative factors, the yields with pretreatment positively correlated with S lignin and negatively with carbohydrate contents. The genotypes with high glucose yields had increased nanoporosity and mGlcA/Xyl ratio, and some had shorter polymers extractable with subcritical water compared to wild-type. The pilot-scale industrial-like pretreatment of best-performing 2OGD construct confirmed its superior sugar yields, supporting our strategy.     

Efficient bioconversion of rice straw to ethanol with TiO2/UV pretreatment

Rice straw is a lignocellulosic biomass that constitutes a renewable organic substance and alternative source of energy; however, its structure confounds the liberation of monosaccharides. Pretreating rice straw using a TiO(2)/UV system facilitated its hydrolysis with Accellerase 1000(?), suggesting that hydroxyl radicals (OH·) from the TiO(2)/UV system could degrade lignin and carbohydrates. TiO(2)/UV pretreatment was an essential step for conversion of hemicellulose to xylose; optimal conditions for this conversion were a TiO(2) concentration of 0.1% (w/v) and an irradiation time of 2 h with a UV-C lamp at 254 nm. After enzymatic hydrolysis, the sugar yields from rice straw pretreated with these parameters were 59.8 ± 0.7% of the theoretical for glucose (339 ± 13 mg/g rice straw) and 50.3 ± 2.8% for xylose (64 ± 3 mg/g rice straw). The fermentation of enzymatic hydrolysates containing 10.5 g glucose/L and 3.2 g xylose/L with Pichia stipitis produced 3.9 g ethanol/L with a corresponding yield of 0.39 g/g rice straw. The maximum possible ethanol conversion rate is 76.47%. TiO(2)/UV pretreatment can be performed at room temperature and atmospheric pressure and demonstrates potential in large-scale production of fermentable sugars.