Energetics of liposomes encapsulating silica nanoparticles

Nanoparticles may be taken up into cells via endocytotic processes whereby the foreign particles are encapsulated in vesicles formed by lipid bilayers. After uptake into these endocytic vesicles, intracellular targeting processes and vesicle fusion might cause transfer of the vesicle cargo into other vesicle types, e.g., early or late endosomes, lysosomes, or others. In addition, nanoparticles might be taken up as single particles or larger agglomerates and the agglomeration state of the particles might change during vesicle processing. In this study, liposomes are regarded as simple models for intracellular vesicles. We compared the energetic balance between two liposomes encapsulating each a single silica nanoparticle and a large liposome containing two silica nanoparticles. Analytical expressions were derived that show how the energy of the system depends on the particle size and the distance between the particles. We found that the electrostatic contributions to the total energy of the system are negligibly small. In contrast, the van der Waals term strongly favors arrangements where the liposome snugly fits around the nanoparticle(s). Thus the two separated small liposomes have a more favorable energy than a larger liposome encapsulating two nanoparticles.     

Techniques for encapsulating bioactive agents into liposomes

As a prerequisite for the use of liposomes for delivery of biologically active agents, techniques are required for the efficient and rapid entrapment of such agents in liposomes. Here we review the variety of procedures available for trapping hydrophilic and hydrophobic compounds. Considerations which are addressed include factors influencing the choice of a particular liposomal system and techniques for the passive entrapment of drugs in multilamellar vesicles and unilamellar vesicles. Attention is also paid to active trapping procedures relying on the presence of (negatively) charged lipid or transmembrane ion gradients. Such gradients are particularly useful for concentrating lipophilic cationic drugs inside liposomes, allowing trapping efficiencies approaching 100%.     

Hydrogen peroxide production from reactive liposomes encapsulating enzymes.

Reactive cationic and anionic liposomes have been prepared from mixtures of dimyristoylphosphatidylcholine (DMPC) and cholesterol incorporating dimethyldioctadecylammonium bromide and DMPC incorporating phosphatidylinositol, respectively. The liposomes were prepared by the vesicle extrusion technique and had the enzymes glucose oxidase (GO) encapsulated in combination with horseradish peroxidase (HRP) or lactoperoxidase (LPO). The generation of hydrogen peroxide from the liposomes in response to externally added D-glucose substrate was monitored using a Rank electrode system polarised to +650 mV, relative to a standard silver-silver chloride electrode. The effects of encapsulated enzyme concentration, enzyme combinations (GO+HRP, GO+LPO), substrate concentration, electron donor and temperature on the production of hydrogen peroxide have been investigated. The electrode signal (peroxide production) was found to increase linearly with GO incorporation, was reduced on addition of HRP and an electron donor (o-dianisidine) and showed a maximum at the lipid chain-melting temperature from the anionic liposomes containing no cholesterol. To aid interpretation of the results, the permeability of the non-reactive substrate (methyl glucoside) across the bilayer membranes was measured. It was found that the encapsulation of the enzymes effected the permeability coefficients of methyl glucoside, increasing them in the case of anionic liposomes and decreasing them in the case of cationic liposomes. These observations are discussed in terms of enzyme bilayer interactions.     

Physicochemical characterization of stealth liposomes encapsulating an organophosphate hydrolyzing enzyme

The present studies were focused on the preparation and characterization of stericaly stabilized liposomes (SLs) encapsulating a recombinant organophosphorus hydrolyzing phosphotriesterase (OPH) enzyme for the antagonism of organophosphorus intoxication. Earlier results indicate that the liposomal carrier system provides an enhanced protective effect against the organophosphorus molecule paraoxon, presenting a more effective therapy with less toxicity than the most commonly used antidotes. Physicochemical characterization of the liposomal OPH delivery system is essential in order to get information on its in vitro stability and in vivo fate. Osmolarity, pH, viscosity, and encapsulation efficiency of the SL preparation and the surface potential of the vesicles were determined. The membrane rigidity and the impact of OPH enzyme on it was studied by electron-paramagnetic resonance spectroscopy, using spin probes. The in vitro stability of the liposomal preparations, the vesicle size distribution, and its alteration during a 3-week storage were followed by dynamic light-scattering measurements. Further, the stability of encapsulated and nonencapsulated OPH was compared in puffer and plasma.     

Polymerization of actin by positively charged liposomes

By cosedimentation, spectrofluorimetry, and electron microscopy, we have established that actin is induced to polymerize at low salt concentrations by positively charged liposomes. This polymerization occurs only at the surface of the liposomes, and thus monomers not in direct contact with the liposome remain monomeric. The integrity of the liposome membrane is necessary to maintain actin in its polymerized state since disruption of the liposome depolymerizes actin. Actin polymerized at the surface of the liposome is organized into two filamentous structures: sheets of parallel filaments in register and a netlike organization. Spectrofluorimetric analysis with the probe N-pyrenyl-iodoacetamide shows that actin is in the F conformation, at least in the environment of the probe. However, actin assembly induced by the liposome is not accompanied by full ATP hydrolysis as observed in vitro upon addition of salts.     

Tissue distribution and cellular distribution of liposomes encapsulating muramyltripeptide phosphatidyl ethanolamide

In previous studies it was shown that administration of liposome-encapsulated MTPPE (LE-MTPPE) led to resistance againstKlebsiella pneumoniae infection. To get more insight in the cell types that are involved in this by LE-MTPPE induced antibacterial resistance, the tissue distribution of liposomes encapsulating MTPPE and the distribution over the cells in the main target organs were investigated. After intravenous injection of the liposomes in mice a substantial amount was recovered from liver and spleen and a smaller amount from the lung. In the liver 83% of the liposomes was taken up by the macrophages. In the spleen also most liposomes were taken up by macrophages of the red and white pulp as well as by dendrocytes. The liver and spleen were also the organs in which, after intravenous inoculation,K. pneumoniae was trapped. It was observed that cells containing LE-MTPPE often had not taken up bacteria. Most bacteria, about 73%, were found in cells not containing liposomes. The capacity of the liposome-containing cells to take up bacteria did not change with time. This suggests that the by LE-MTPPE immunostimulating effect is due to the production of cytokines by the cells that take up LE-MTPPE. These cytokines might stimulate other cells to the killing of bacteria.     

Bundling of actin filaments by alpha-actinin depends on its molecular length

Cross-linking of actin filaments (F-actin) into bundles and networks was investigated with three different isoforms of the dumbbell-shaped alpha-actinin homodimer under identical reaction conditions. These were isolated from chicken gizzard smooth muscle, Acanthamoeba, and Dictyostelium, respectively. Examination in the electron microscope revealed that each isoform was able to cross-link F-actin into networks. In addition, F-actin bundles were obtained with chicken gizzard and Acanthamoeba alpha-actinin, but not Dictyostelium alpha-actinin under conditions where actin by itself polymerized into disperse filaments. This F-actin bundle formation critically depended on the proper molar ratio of alpha-actinin to actin, and hence F-actin bundles immediately disappeared when free alpha-actinin was withdrawn from the surrounding medium. The apparent dissociation constants (Kds) at half-saturation of the actin binding sites were 0.4 microM at 22 degrees C and 1.2 microM at 37 degrees C for chicken gizzard, and 2.7 microM at 22 degrees C for both Acanthamoeba and Dictyostelium alpha-actinin. Chicken gizzard and Dictyostelium alpha-actinin predominantly cross-linked actin filaments in an antiparallel fashion, whereas Acanthamoeba alpha-actinin cross-linked actin filaments preferentially in a parallel fashion. The average molecular length of free alpha-actinin was 37 nm for glycerol-sprayed/rotary metal-shadowed and 35 nm for negatively stained chicken gizzard; 46 and 44 nm, respectively, for Acanthamoeba; and 34 and 31 nm, respectively, for Dictyostelium alpha-actinin. In negatively stained preparations we also evaluated the average molecular length of alpha-actinin when bound to actin filaments: 36 nm for chicken gizzard and 35 nm for Acanthamoeba alpha-actinin, a molecular length roughly coinciding with the crossover repeat of the two-stranded F-actin helix (i.e., 36 nm), but only 28 nm for Dictyostelium alpha-actinin. Furthermore, the minimal spacing between cross-linking alpha-actinin molecules along actin filaments was close to 36 nm for both smooth muscle and Acanthamoeba alpha-actinin, but only 31 nm for Dictyostelium alpha-actinin. This observation suggests that the molecular length of the alpha-actinin homodimer may determine its spacing along the actin filament, and hence F-actin bundle formation may require "tight" (i.e., one molecule after the other) and "untwisted" (i.e., the long axis of the molecule being parallel to the actin filament axis) packing of alpha-actinin molecules along the actin filaments.     

Dynamic actin remodeling during epithelial-mesenchymal transition depends on increased moesin expression

Remodeling of actin filaments is necessary for epithelial-mesenchymal transition (EMT); however, understanding of how this is regulated in real time is limited. We used an actin filament reporter and high-resolution live-cell imaging to analyze the regulated dynamics of actin filaments during transforming growth factor-β-induced EMT of mammary epithelial cells. Progressive changes in cell morphology were accompanied by reorganization of actin filaments from thin cortical bundles in epithelial cells to thick, parallel, contractile bundles that disassembled more slowly but remained dynamic in transdifferentiated cells. We show that efficient actin filament remodeling during EMT depends on increased expression of the ezrin/radixin/moesin (ERM) protein moesin. Cells suppressed for moesin expression by short hairpin RNA had fewer, thinner, and less stable actin bundles, incomplete morphological transition, and decreased invasive capacity. These cells also had less α-smooth muscle actin and phosphorylated myosin light chain in cortical patches, decreased abundance of the adhesion receptor CD44 at membrane protrusions, and attenuated autophosphorylation of focal adhesion kinase. Our findings suggest that increased moesin expression promotes EMT by regulating adhesion and contractile elements for changes in actin filament organization. We propose that the transciptional program driving EMT controls progressive remodeling of actin filament architectures.     

The dimensionality of stability depends on disturbance type

Ecosystems respond in various ways to disturbances. Quantifying ecological stability therefore requires inspecting multiple stability properties, such as resistance, recovery, persistence and invariability. Correlations among these properties can reduce the dimensionality of stability, simplifying the study of environmental effects on ecosystems. A key question is how the kind of disturbance affects these correlations. We here investigated the effect of three disturbance types (random, species‐specific, local) applied at four intensity levels, on the dimensionality of stability at the population and community level. We used previously parameterized models that represent five natural communities, varying in species richness and the number of trophic levels. We found that disturbance type but not intensity affected the dimensionality of stability and only at the population level. The dimensionality of stability also varied greatly among species and communities. Therefore, studying stability cannot be simplified to using a single metric and multi‐dimensional assessments are still to be recommended.     

Velocity of myosin-based actin sliding depends on attachment and detachment kinetics and reaches a maximum when myosin-binding sites on actin saturate

Molecular motors such as kinesin and myosin often work in groups to generate the directed movements and forces critical for many biological processes. Although much is known about how individual motors generate force and movement, surprisingly, little is known about the mechanisms underlying the macroscopic mechanics generated by multiple motors. For example, the observation that a saturating number, N, of myosin heads move an actin filament at a rate that is influenced by actin–myosin attachment and detachment kinetics is accounted for neither experimentally nor theoretically. To better understand the emergent mechanics of actin–myosin mechanochemistry, we use an in vitro motility assay to measure and correlate the N-dependence of actin sliding velocities, actin-activated ATPase activity, force generation against a mechanical load, and the calcium sensitivity of thin filament velocities. Our results show that both velocity and ATPase activity are strain dependent and that velocity becomes maximized with the saturation of myosin-binding sites on actin at a value that is 40% dependent on attachment kinetics and 60% dependent on detachment kinetics. These results support a chemical thermodynamic model for ensemble motor mechanochemistry and imply molecularly explicit mechanisms within this framework, challenging the assumption of independent force generation.     

Interaction of alkylphospholipid liposomes with MT-3 breast-cancer cells depends critically on cholesterol concentration

We have investigated interaction of alkyphospholipid (APL) liposomes consisting of 1,1-dimethylpiperidin-1-ium-4-yl) octadecyl phosphate (OPP) and different concentrations of cholesterol (CH) with human MT-3 breast-cancer cells using electron paramagnetic resonance method (EPR) with advanced characterization of EPR spectra of spin labeled liposome membranes. After incubation of OPP liposomes with MT-3 cells, a reduction of liposome entrapped, water soluble spin-probe tempocholine (ASL) was observed, indicating that ASL is released from liposomes and is reduced by oxy-redoxy systems inside the cells. This process is fast if cholesterol content in the bilayer was 29 or 45 mol%, whereas at 56 mol% cholesterol the process is almost stopped. The rate of spin-probe reduction in first 10 min after incubation with cells is even faster as for the free ASL, indicating that liposomes with low amount of cholesterol accelerate penetration of ASL into the cells. A faster release of hydrophilic material from liposomes with low cholesterol content coincides with the presence of domains with highly disordered alkyl chain motion that disappears at 50 mol% of cholesterol. We propose that these highly fluid domains are responsible for interaction of OPP liposomes with cells and fast release of the entrapped material into the cells. These results suggest that micelles are not the only reason for cytotoxic effect of OPP liposome formulations, as it was suggested before. OPP in liposomes, containing 45 mol% cholesterol or less, also contributes to the cytotoxic effect, due to their fast interaction with breast-cancer cells.     

Spindle orientation in Saccharomyces cerevisiae depends on the transport of microtubule ends along polarized actin cables

Microtubules and actin filaments interact and cooperate in many processes in eukaryotic cells, but the functional implications of such interactions are not well understood. In the yeast Saccharomyces cerevisiae, both cytoplasmic microtubules and actin filaments are needed for spindle orientation. In addition, this process requires the type V myosin protein Myo2, the microtubule end-binding protein Bim1, and Kar9. Here, we show that fusing Bim1 to the tail of the Myo2 is sufficient to orient spindles in the absence of Kar9, suggesting that the role of Kar9 is to link Myo2 to Bim1. In addition, we show that Myo2 localizes to the plus ends of cytoplasmic microtubules, and that the rate of movement of these cytoplasmic microtubules to the bud neck depends on the intrinsic velocity of Myo2 along actin filaments. These results support a model for spindle orientation in which a Myo2-Kar9-Bim1 complex transports microtubule ends along polarized actin cables. We also present data suggesting that a similar process plays a role in orienting cytoplasmic microtubules in mating yeast cells.     

Hydrolysis of ATP by polymerized actin depends on the bound divalent cation but not profilin.

Growing evidence suggests that the nucleotide bound to actin filaments serves as a timer to control actin filament turnover during cell motility (Pollard, T. D., Blanchoin, L., and Mullins, R. D. (2000) Annu. Rev. Biophys. Biomol. Struct. 29, 545-576). We re-examined the hydrolysis of ATP by polymerized actin using mechanical quenched-flow methods to improve temporal resolution. The rate constant for ATP hydrolysis by polymerized Mg actin is 0.3 s(-1), 3-fold faster than that measured manually. The ATP hydrolysis rate is similar when Mg ATP actin elongates either the pointed end or the barbed end of filaments. Polymerized Ca actin hydrolyzes ATP at 0.05 s(-1). Mg ATP actin saturated with profilin can elongate barbed ends at >60 s(-1), 2 orders of magnitude faster than ATP hydrolysis (0.3 s(-1)). Given that profilin binds to a surface on actin that is buried in the Holmes model of the actin filament, we expect that profilin will block subunit addition at the barbed end of a filament. Profilin must move from this site at rates much faster than it dissociates from monomers (4 s(-1)). ATP hydrolysis is not required for this movement.     

负载噬菌体qdvp001的阳离子脂质体的制备及热稳定性和抗菌活性

[背景]副溶血弧菌噬菌体qdvp001在防治副溶血弧菌污染方面具有巨大的应用潜力,但其对温度的敏感性较高,在较高的温度环境下会失活.[目的]利用阳离子脂质体包埋保护噬菌体qdvp001以提高其热稳定性,同时探究其脂质体包被液的抗菌活性.[方法]制备和表征负载副溶血弧菌噬菌体qdvp001的阳离子脂质体,测定阳离子脂质体...     

Eukaryotic cell locomotion depends on the propagation of self-organized reaction-diffusion waves and oscillations of actin filament assembly

Actin filament (F-actin) assembly kinetics determines the locomotion and shape of crawling eukaryotic cells, but the nature of these kinetics and their determining reactions are unclear. Live BHK21 fibroblasts, mouse melanoma cells, and Dictyostelium amoebae, locomoting on glass and expressing Green Fluorescent Protein-actin fusion proteins, were examined by confocal microscopy. The cells demonstrated three-dimensional bands of F-actin, which propagated throughout the cytoplasm at rates usually ranging between 2 and 5 microm/min in each cell type and produced lamellipodia or pseudopodia at the cell boundary. F-actin's dynamic behavior and supramolecular spatial patterns resembled in detail self-organized chemical waves in dissipative, physico-chemical systems. On this basis, the present observations provide the first evidence of self-organized, and probably autocatalytic, chemical reaction-diffusion waves of reversible actin filament assembly in vertebrate cells and a comprehensive record of wave and locomotory dynamics in vegetative-stage Dictyostelium cells. The intensity and frequency of F-actin wavefronts determine locomotory cell projections and the rotating oscillatory waves, which structure the cell surface. F-actin assembly waves thus provide a fundamental, deterministic, and nonlinear mechanism of cell locomotion and shape, which complements mechanisms based exclusively on stochastic molecular reaction kinetics.     

Involvement of actin cytoskeleton in macrophage apoptosis induced by cationic liposomes

We clarified whether actin cytoskeleton is involved in the macrophage apoptosis induced by cationic liposomes composed of stearylamine (SA-liposomes). Externalization of phosphatidylserine induced by SA-liposomes was suppressed by cytochalasin D, a specific inhibitor of polymerization of F-actin. Furthermore, activation of PKCδ and reactive oxygen species (ROS) generation, which could be involved in the macrophage apoptosis, were inhibited by cytochalasin D. Microscopical observation revealed the co-localization of 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI)-labeled SA-liposomes and fluorescein-labeled phalloidin, which specifically binds to F-actin, and this co-localization was also inhibited by cytochalasin D. Co-localization of SA-liposomes and F-actin was also inhibited by the pre-treatment of cells with chondroitinase ABC. These findings could be the first observation concerning the contribution of the proteoglycan-actin cytoskeleton-ROS generation pathway to apoptosis induced by SA-liposomes in macrophages.     

Segregation of GM1 and GM3 clusters in the cell membrane depends on the intact actin cytoskeleton

Gangliosides have been implicated in exerting multiple physiological functions, and it is important to understand how their distribution is regulated in the cell membrane. By using freeze-fracture immunolabeling electron microscopy, we showed that GM1 and GM3 make independent clusters that are significantly reduced by cholesterol depletion. In the present study, we examined the effects of actin depolymerization/polymerization and Src-family kinase inhibition on the GM1 and GM3 clusters. Both GM1 and GM3 clustering was reduced when the actin cytoskeleton was perturbed by latrunculin A or jasplakinolide, but the decrease was less significant than that induced by cholesterol depletion. On the other hand, inhibition of Src-family kinases decreased GM3 clustering more drastically than did cholesterol depletion, whereas its effect on GM1 clustering was less significant. GM1 and GM3 were segregated from each other in unperturbed cells, but co-clustering increased significantly after actin depolymerization. Our results indicate that the GM1 and GM3 clusters in the cell membrane are regulated in different ways and that segregation of the two gangliosides depends on the intact actin cytoskeleton.     

Protein encapsulation in liposomes: efficiency depends on interactions between protein and phospholipid bilayer.

Background  

We investigated the encapsulation mechanism of enzymes into liposomes. The existing protocols to achieve high encapsulation efficiencies are basically optimized for chemically stable molecules. Enzymes, however, are fragile and encapsulation requires in addition the preservation of their functionality. Using acetylcholinesterase as a model, we found that most protocols lead to a rapid denaturation of the enzyme with loss in the functionality and therefore inappropriate for such an application. The most appropriate method is based on lipid film hydration but had a very low efficiency.