Solid-state fermentation increases secretome complexity in Aspergillus brasiliensis

Aspergillus is used for the industrial production of enzymes and organic acids, mainly by submerged fermentation (SmF). However, solid-state fermentation (SSF) offers several advantages over SmF. Although differences related to lower catabolite repression and substrate inhibition, as well as higher extracellular enzyme production in SSF compared to SmF have been shown, the mechanisms undelaying such differences are still unknown. To explain some differences among SSF and SmF, the secretome of Aspergillus brasiliensis obtained from cultures in a homogeneous physiological state with high glucose concentrations was analyzed. Of the regulated proteins produced by SmF, 74% were downregulated by increasing the glucose concentration, whereas all those produced by SSF were upregulated. The most abundant and upregulated protein found in SSF was the transaldolase, which could perform a moonlighting function in fungal adhesion to the solid support. This study evidenced that SSF: (i) improves the kinetic parameters in relation to SmF, (ii) prevents the catabolite repression, (iii) increases the branching level of hyphae and oxidative metabolism, as well as the concentration and diversity of secreted proteins, and (iv) favors the secretion of typically intracellular proteins that could be involved in fungal adhesion. All these differences can be related to the fact that molds are more specialized to growth in solid materials because they mimic their natural habitat.     

Production of bacterial exopolysaccharides by solid substrate fermentation

In a comparison of submerged cultivation (SC) with solid substrate fermentation (SSF) for the production of bacterial exopolysaccharides (EPS), the latter technique yielded 2 to 4.7 times more polymer than the former, on the laboratory scale. SSF was performed using inert solid particles (spent malt grains) impregnated with a liquid medium. The polymer yields obtained from SSFs, as referred to the impregnating liquid volumes, were as follows: 38.8 g/litre xanthan from Xanthomonas campestris, 21.8 g/litre succinoglycan from Rhizobium hedysari and 20.3 g/litre succinoglycan from Agrobacterium tumefaciens PT45. These results make this technique promising for a potential application on the industrial scale. A further advantage with this fermentation process is found in the availability and low cost of substrates, which are obtained as by-products or wastes from the agriculture or food industry.     

Laccase production in solid‐state and submerged fermentation by Pleurotus ostreatus

A solid‐state fermentation (SSF) system for production of an industrially important enzyme laccase by Pleurotus ostreatus was developed by using potato dextrose yeast extract medium and polyurethane foam as a supporting material. The maximum laccase production in the SSF system was as high as 3×10⁵ U/L. Addition of inducers, such as copper and ferulic acid, further enhanced the laccase production in SSF. Moreover, the time required for the maximum laccase production was reduced to 6 days compared to 10 days reported earlier. The improvement achieved by the SSF system was investigated by comparing it to a submerged fermentation system (SmF), both experimentally and by using a standard theoretical model along with a parameter sensitivity analysis. Laccase production in SSF was found to be twice of that in SmF. One of the main reasons for higher laccase production in SSF compared to SmF was possibly due to the presence of higher proteolytic activity in SmF. Strong proteolytic activity in SmF presumably caused subsequent laccase degradation, which lowered the ultimate laccase production in SmF compared to SSF.     

Phytase isozymes from Aspergillus niger NCIM 563 under solid state fermentation: Biochemical characterization and their correlation with submerged phytases

Aspergillus niger NCIM 563 produces dissimilar phytase isozymes under solid state and submerged fermentation conditions. Biochemical characterization and applications of phytase Phy III and Phy IV in SSF and their comparison with submerged fermentation Phy I and Phy III were studied. SSF phytases have a higher metabolic potential as compared to SmF. Phy I is tetramer and Phy II, III and IV are monomers. Phy I and IV have pH optima of 2.5 and Phy II and III have pH optima of 5.0 and 5.6, respectively. Phy I, III and IV exhibited very broad substrate specificity while Phy II was more specific for sodium phytate. SSF phytase is less thermostable as compared to SmF phytase. Phy I and II show homology with other known phytases while Phy III and IV show no homology with SmF phytases and any other known phytases from the literature suggesting their unique nature. This is the first report about differences among phytase produced under SSF and SmF by A. niger and this study provides basis for explanation of the stability and catalytic differences observed for these enzymes. Exclusive biochemical characteristics and multilevel application of SSF native phytases determine their efficacy and is exceptional.     

Beta-fructofuranosidase production by 2-deoxyglucose resistant mutants of aspergillus niger in submerged and solid-state fermentation

Aspergillus niger produces extracellular beta-fructofuranosidase under submerged (SmF) and solid state fermentation (SSF) conditions. After UV mutagenesis of conidiospores of A. niger, 2-deoxyglucose (10 g/l) resistant mutants were isolated on Czapek's minimal medium containing glycerol as a carbon source and the mutants were examined for improved production of beta-fructofuranosidase in SmF and SSF conditions. One of such mutant DGRA-1 overproduced beta-fructofuranosidase in both SmF and SSF conditions. In SmF, the mutant DGRA-1 showed higher beta-fructofuranosidase productivity (110.8 U/l/hr) than the wild type (48.3 U/l/hr). While in SSF the same strain produced 322 U/l/hr of beta-fructofuranosidase, 2 times higher than that of wild type (154.2 U/l/hr). In SmF, both wild type and mutants produced relatively low level of beta-fructofuranosidase in medium containing sucrose with glucose than from the sucrose medium. However in SSF, the DGRA-1 mutant grown in sucrose and sucrose+ glucose did not show any difference with respect to beta-fructofuranosidase production. These results indicate that the catabolite repression of beta-fructofuranosidase synthesis is observed in SmF whereas in SSF such regulation was not prominent.     

Comparative production of cellulases by mutants of Penicillium janthinellum NCIM 1171 and its application in hydrolysis of Avicel and cellulose

Mutants of Penicillium janthinellum NCIM 1171 were evaluated for cellulase production using both submerged fermentation (SmF) and solid state fermentation (SSF). Mutant EU2D-21 gave highest yields of cellulases in both SmF and SSF. Hydrolysis of Avicel and cellulose were compared using SmF and SSF derived enzyme preparations obtained from EU2D-21. Surprisingly, the use of SSF derived preparation gave less hydrolysis compared to SmF derived enzymes. This may be due to inactivation of β-glucosidase at 50 °C in SSF derived enzyme preparations. SmF derived enzyme preparations contained both thermostable and thermosensitive β-glucosidases where as SSF derived enzyme preparations contained predominantly thermosensitive β-glucosidase. This is the first report on less thermostability of SSF derived β-glucosidase which is the main reason for getting less hydrolysis.     

Optimization of media for β-fructofuranosidase production by Aspergillus niger in submerged and solid state fermentation

The kinetics of β-fructofuranosidase (Ffase) production by Aspergillus niger in submerged (SmF) and solid-state fermentation (SSF) systems was investigated. The maximum productivity of Ffase (81.8 U/l per h) was obtained in SSF for 72 h while it was 18.3 U/l per h in SmF for 120 h. The productivity of extra cellular Ffase produced in SSF was 5-fold higher than in SmF. Optimization of fermentation medium for Ffase production was carried out using De Meo's fractional factorial design with seven components such as (NH₄)₂SO₄, KH₂PO₄, FeSO₄, MgSO₄ · 7H₂O, sucrose, urea and yeast extract. The media designed for SmF after two steps of optimization supported the growth of A. niger and higher productivity of Ffase (58.3 U/l per h) than with the medium before optimization. The optimized medium of SmF when used in SSF, did not improve the Ffase productivity and therefore medium for SSF was optimized independent of SmF. After two optimization steps, the media was defined for SSF which supported the growth and high level of Ffase productivity (149.1 U/l per h) in SSF compared to the medium before optimization (81.8 U/l per h) and optimized medium for SmF (58.3 U/l per h). Our results suggested that the optimized media for SmF and SSF for the production of Ffase have to be different.     

Gibberellic acid by solid state fermentation: Consistent and improved yields

Five strains each of Gibberella fujikuroi and Fusarium monoliforme were screened to select G. fujikuroi P-3, a strain capable of giving consistent production of gibberellic acid (GA(3)) by solid state fermentation (SSF). The comparative production of GA(3) by SSF and submerged fermentation (SmF) indicated better productivity with the former technique. The accumulation of GA(3) was 1.626 times higher in the case of SSF. On the basis of available carbohydrates in the media, the percent conversions were 0.096 and 0.156 in SmF and SSF, respectively. The use of coarse wheat bran of the particle size of 0.3-0.4 cm resulted in an increase of 2.5 times in the yield of GA(3). The enrichment of commercial wheat bran with soluble starch gave enhanced accumulation to an extent of 3.5 times. The relation between GA(3) production and cell growth in SSF was similar to that encountered in SmF. The consistent and improved yields to a tune of 1.22 g GA(3) per kilogram dry moldy bran (DMB) establish the potential and feasibility of SSF for the production of GA(3) by G. fujikuroi P-3. On preliminary cost analysis, a net savings of about 60% and 50% on fermentation medium cost and the expenditure on down-stream processing, respectively, as compared to the presently employed SmF technique was evident.     

Production of amyloglucosidase by Aspergillus niger under different cultivation regimens

Amyloglucosidase (AMG) was produced by Aspergillus niger in solid-state fermentation (SSF), submerged fermentation (SmF) and an aqueous, two-phase system of polyethyleneglycol (PEG) and salt. In SSF, a fed-batch mode of operation gave a yield of 64 U/ml compared with 44 U/ml in batch mode. Similar trends were observed for SmF, where fed-batch cultivation gave a yield of 102 U/ml compared with 66 U/ml in batch. Shorter cultivation times (66 h) were required for SmF than for SSF (96 h). In the aqueous, two-phase cultivation, the productivity and yield of AMG were both twice those in the control fermentation.M. Ramadas is with the Department of Biochemistry, Faculty of Medicine, University of Jaffna, Kokuvil, Sri Lanka. O. Holst and B. Mattiasson are with the Department of Biotechnology, Chemical Center, Lund University, Box 124, S-221 00 Lund, Sweden     

Lipase production and Penicillium simplicissimum morphology in solid-state and submerged fermentations

A comparative study of Penicillium simplicissimum morphology and lipase production was performed using solid-state (SSF) and submerged (SmF) fermentation. SSF was carried out on babassu cake as culture medium and SmF on a semi-synthetic medium and a medium based on suspended babassu cake grains. Yield of product on biomass, specific activity and conidia production were 3.3-, 1.3- and 2-fold higher in SSF. In SmF, the type of fungus growth differed according to the medium. Using the semi-synthetic medium, the fungus formed densely interwoven mycelial masses without conidia production, whereas using the babassu-based medium the fungus formed free mycelia and adhered to the surfaces of the grains, producing conidia. The results show that babassu cake induces conidiation in SmF. In SSF, the fungus not only grew on the surface of the grains, producing conidia abundantly, but also effectively colonized and penetrated the babassu particles. The high conidia production and lipase productivity in SSF may be related to the low availability of nutrients or to other stimuli associated with this type of fermentation. Thus, the high production of the thermostable P. simplicissimum lipase, using a non-supplemented, low-cost agro-industrial residue as the culture medium, demonstrates the biotechnological potential of SSF for the production of industrial enzymes.     

Aspergillus oryzae in solid-state and submerged fermentations. Progress report on a multi-disciplinary project

We report the progress of a multi-disciplinary research project on solid-state fermentation (SSF) of the filamentous fungus Aspergillus oryzae. The molecular and physiological aspects of the fungus in submerged fermentation (SmF) and SSF are compared and we observe a number of differences correlated with the different growth conditions. First, the aerial hyphae which occur only in SSFs are mainly responsible for oxygen uptake. Second, SSF is characterised by gradients in temperature, water activity and nutrient concentration, and inside the hyphae different polyols are accumulating. Third, pelleted growth in SmF and mycelial growth in SSF show different gene expression and protein secretion patterns. With this approach we aim to expand our knowledge of mechanisms of fungal growth on solid substrates and to exploit the biotechnological applications.     

New perspectives of gibberellic acid production: a review

The gibberellins (GAs) are an important group of hormones which exert various effects on promoter and regulator of plant growth. Gibberellic acid (GA(3)) is a natural plant hormone, with great economical and industrial importance. It affects stem elongation, germination, elimination of dormancy, flowering, sex expression, enzyme induction and leaf and fruit senescence. Despite its diverse applications, the use of GA(3) is limited due to its high production costs. The industrial process currently used for the production of GA(3) is based on submerged fermentation (SmF) techniques. As an alternative for its production, solid state fermentation (SSF) has also been investigated for its ability to increase the yields of GA(3) with the use of agro-industrial wastes as support/substrate, which contributes to the decreased production costs. This review describes GA(3)'s physical, chemical and biological properties, its production by fermentation and new advances that are being carried out with special interest on the SSF technique.     

Production of tannase by Aspergillus niger Aa-20 in submerged and solid-state fermentation: influence of glucose and tannic acid

Tannase production by Aspergillus niger Aa-20 was studied in submerged (SmF) and solid-state (SSF) fermentation systems with different tannic acid and glucose concentrations. Tannase activity and productivity were at least 2.5 times higher in SSF than in SmF. Addition of high tannic acid concentrations increased total tannase activity in SSF, while in SmF it was decreased. In SmF, total tannase activity increased from 0.57 to 1.03 IU/mL, when the initial glucose concentration increased from 6.25 to 25 g/L, but a strong catabolite repression of tannase synthesis was observed in SmF when an initial glucose concentration of 50 g/L was used. In SSF, maximal values of total tannase activity decreased from 7.79 to 2.51 IU when the initial glucose concentration was increased from 6.25 to 200 g/L. Kinetic results on tannase production indicate that low tannase activity titers in SmF could be associated to an enzyme degradation process which is not present in SSF. Tannase titers produced by A. niger Aa-20 are fermentation system-dependent, favoring SSF over SmF. Journal of Industrial Microbiology & Biotechnology (2001) 26, 296–302. Received 07 July 2000/ Accepted in revised form 15 February 2001     

Mycophenolic acid production in solid-state fermentation using a packed-bed bioreactor

Mycophenolic acid (MPA) was produced from Penicillium brevicompactum by solid-state fermentation (SSF) using pearl barley, and submerged fermentation (SmF) using mannitol. It was found that SSF was superior to SmF in terms of MPA concentration (1219 mg/L vs. 60 mg/L after 144 h fermentation), and the product yields were 6.1 mg/g pearl barley for SSF and 1.2 mg/g mannitol for SmF. The volumetric productivities were 8.5 and 0.42 mg/L h for SSF and SmF, respectively.The optimum solid substrate of SSF for MPA production was pearl barley, producing 5470 mg/kg compared with wheat bran (1601 mg/kg), oat (3717 mg/kg) and rice (2597 mg/kg). The optimum moisture content, incubation time and inoculum concentrations were 70%, 144 h and 6%, respectively. Neither the addition of mannitol or (NH4)₂HPO₄ nor adjustment of media pH within the range of 3–7 significantly enhanced MPA production.MPA production by SSF using a packed-bed bioreactor was performed and an increased maximum production of MPA 6.9 mg/g was achieved at 168 h incubation time. The higher volumetric productivity and concentrations makes SSF an attractive alternative to SmF for MPA production.     

Novel Characteristics of Bifidobacterium bifidum in Solid State Fermentation System

Summary The characteristics of Bifidobacterium bifidum grown in solid state fermentation (SSF) system (water content of media 54.5 and 68.8%) was compared with the submerged fermentation (SmF) system (water content of medium: 89.8%). Besides lactic acid (lactate) and acetic acid (acetate), the bacterium was able to secrete propionic acid (propionate) and butyric acid (butyrate) under SSF conditions. However, it only produced lactate and acetate under SmF conditions. The ratio of lactate to acetate was 1.26–1.62:1 in SSF but it was 1:2 in SmF. A higher content of C16:0 and C18:1 as well as a lower content of C18:0 cell membrane fatty acids were observed in SSF than in SmF. There was a lower growth rate, a lower viable count and a longer logarithmic growth phase for B. bifidum cultivated in SSF than in SmF.     

Productivity of laccase in solid substrate fermentation of selected agro-residues by Pycnoporus sanguineus

A comparative study on solid substrate fermentation (SSF) of sago 'hampas', oil palm frond parenchyma tissue (OPFPt) and rubberwood sawdust with Pycnoporus sanguineus for laccase production was carried out. Optimal mycelial growth of Pyc. sanguineus was observed on all the substrates studied over a 21 days time-course fermentation. Laccase productivity was highest during degradation of sago 'hampas' and OPFPt and a range from 7.5 to 7.6 U/g substrate on the 11th day of fermentation compared to degradation of rubberwood sawdust with a maximum laccase productivity of 5.7 U/g substrate on day 11 of SSF. Further optimization of laccase production was done by varying the inoculum age, density and nitrogen supplementation. SSF of OPFPt by Pyc. sanguineus gave maximum productivity of laccase of 46.5 U/g substrate on day 6 of fermentation with a 30% (w/w) of 4 weeks old inoculum and 0.92% nitrogen in the form of urea supplemented in the substrate. The extraction of laccase was also optimized in this study. Recovery of laccase was fourfold higher at 30.6 U/g substrate on day 10 of SSF using unadjusted tap water at pH 8.0 as extraction medium at 25+/-2 degrees C compared to laccase recovery of 7.46 U/g substrate using sodium acetate buffer at pH 4.8 at 4 degrees C. Further optimization showed that laccase recovery was increased by 50% with a value of 46.5 U/g substrate on day 10 of SSF when the extraction medium was tap water adjusted to pH 5.0 at 25+/-2 degrees C.     

Solid-state production of lignin peroxidase (LiP) and manganese peroxidase (MnP) by Phanerochaete chrysosporium using steam-exploded straw as substrate

In the used media mainly consisting of steam-exploded wheat straw, the straw, which could replace expensive veratryl alcohol, might act not only as nutrient, but also as inducer of lignin enzymes. The activities of the enzymes lignin peroxidase (LiP) and manganese peroxidase (MnP) in solid-state fermentation (SSF) were far higher than in submerged fermentation (SmF). Under optimal conditions of SSF, the maximum activities of the enzymes Lip and MnP were 2600 and 1375 U/L, respectively. Thus, this would pave the way for production and application of lignin enzymes on a large scale.     

Production and Regulation of Lipase Activity from <Emphasis Type="Italic">Penicillium restrictum</Emphasis> in Submerged and Solid-State Fermentations

Different carbon (C) sources, mainly carbohydrates and lipids, have been screened for their capacity to support growth and lipase production by Penicillium restrictum in submerged fermentation (SmF) and in solid-state fermentation (SSF). Completely different physiological behaviors were observed after the addition of easily (oleic acid and glucose) and complex (olive oil and starch) assimilable C sources to the liquid and solid media. Maximal lipolytic activities (12.1 U/mL and 17.4 U/g) by P. restrictum were obtained with olive oil in SmF and in SSF, respectively. Biomass levels in SmF (12.2–14.1 mg/mL) and SSF (7.0–8.0 mg/g) did not varied greatly with the distinct C sources used. High lipase production (12.3 U/g) using glucose was only attained in SSF, perhaps due to the ability of this fermentation process to minimize catabolite repression.     

New perspectives of gibberellic acid production: a review

The gibberellins (GAs) are an important group of hormones which exert various effects on promoter and regulator of plant growth. Gibberellic acid (GA₃) is a natural plant hormone, with great economical and industrial importance. It affects stem elongation, germination, elimination of dormancy, flowering, sex expression, enzyme induction and leaf and fruit senescence. Despite its diverse applications, the use of GA₃ is limited due to its high production costs. The industrial process currently used for the production of GA₃ is based on submerged fermentation (SmF) techniques. As an alternative for its production, solid state fermentation (SSF) has also been investigated for its ability to increase the yields of GA₃ with the use of agro-industrial wastes as support/substrate, which contributes to the decreased production costs. This review describes GA₃’s physical, chemical and biological properties, its production by fermentation and new advances that are being carried out with special interest on the SSF technique.