Production of fungal chitosan by solid substrate fermentation followed by enzymatic extraction

An improved method is described for the production of chitosan from mycelia of the fungus Gongronella butleri, grown by solid substrate fermentation on sweet potato. The chitosan was extracted subsequently by 11 M NaOH at 45 °C, and 0.35 M acetic acid at 95 °C. The resulting extract was clarified using a heat-stable, commercial -amylase. The yield (4–6 g/100 g mycelia) and relative number average molecular weight (44–54 kDa) of the chitosan increased with increasing duration of fungal growth up to the sixth day.     

Chitosan bicomponent nanofibers and nanoporous fibers

Nanofibers with average diameters between 20 and 100nm have been prepared by electrospinning of 82.5% deacetylated chitosan (Mv=1600 kDa) mixed with poly(vinyl alcohol) (PVA, Mw=124-186 kDa) in 2% (v/v) aqueous acetic acid. The formation of bicomponent fibers was feasible with 3% concentration of solution containing up to an equal mass of chitosan. Finer fibers, fewer beaded structures and more efficient fiber formation were observed with increasing PVA contents. Nanoporous fibers could be generated by removing the PVA component in the 17/83 chitosan/PVA bicomponent fibers with 1M NaOH (12 h). Fiber formation efficiency and composition uniformity improved significantly when the molecular weight of chitosan was halved by alkaline hydrolysis (50 wt% aqueous NaOH, 95 degrees C, 48 h). The improved uniform distribution of chitosan and PVA in the bicomponent fibers was attributed to better mixing mostly due to the reduced molecular weight and to the increased deacetylation of the chitosan.     

Effect of the degree of acetylation of chitosan on its enzymatic hydrolysis with the preparation Celloviridin G20x

The degree of acetylation exerted only insignificant effects on the enzymatic hydrolysis of chitosan, while affecting the composition of the resulting hydrolysates and their water solubility. Chitosan with various degrees of acetylation was produced by reacetylation of the original chitosan (the solvents, methanol and 2% acetic acid, were present at a ratio of 54:51 v/v; the amount of acetic anhydride was in the range 0.1-2.0 mmol per 1 g chitosan). Hydrolysis by the enzymatic preparation Celloviridin G20x was performed at the enzyme to substrate ratio of 1:400 in sodium-acetate buffer, pH 5.2 (55 degrees C) for 1 h.     

Levels of sulfhydryls and disulfides in proteins from Neurospora crassa conidia and mycelia

Proteins extracted with 6 M guanidine at 90 degrees C from conidia (asexual spores) of Neurospora crassa contained ca. 25% more total protein thiol and a fivefold-higher content of disulfide bonds than proteins extracted from mycelia, as determined by labeling with iodo[14C]acetic acid. The total thiol content was 88 mumol/g of protein in conidia and 70 mumol/g of protein in mycelia. The level of protein disulfide was 18.5 mumol/g of protein in conidia and 3.5 mumol/g of protein in mycelia, by the iodo[14C]acetic acid labeling method. Confirmatory results were obtained with 5'5-dithio-bis-2-nitrobenzoic acid titration of protein thiol groups in 1% sodium dodecyl sulfate as well as by amino acid analysis of cysteic acid derivatives. Buffer-extracted proteins from conidia, but not mycelia, were found to contain enriched levels of protein thiols and disulfides per gram of protein as compared with guanidine hydrochloride extracts. It was demonstrated that the high disulfide content of crude conidial extracts was not due to measurable levels of mixed disulfides formed between protein sulfhydryl groups and cysteine. During germination of the conidia, the high disulfide levels of the conidial proteins remained constant. These data suggest that, unlike the disulfides of glutathione, the bulk of conidial protein disulfides were not reduced, excreted, or extensively degraded during germination.     

培养基及培养条件对冬虫夏草菌固体发酵产分生孢子的影响

为获得冬虫夏草菌固体发酵产分生孢子的最优工艺,以野生分离的冬虫夏草菌为材料,对其固体发酵产分生孢子的培养基及培养条件进行了研究。试验结果表明：泥炭土为最佳基础培养基,该培养基中冬虫夏草菌气生菌丝生长一般,但产分生孢子最多,可达4.2×10³个/g;泥炭土培养基中添加0.1‰ IAA（吲哚乙酸）、0.1‰ IBA（吲哚丁酸）和0.1‰ NAA（萘乙酸）能促进冬虫夏草菌气生菌丝的生长和分生孢子的产生,其分生孢子达8.1×10³个/g;该基础培养基中,冬虫夏草菌于18℃培养30d后,在10℃、相对湿度45%、蓝光照射进行诱导,分生孢子可达1.0×10⁴个/g。本研究建立了一种大量获取冬虫夏草菌分生孢子的方法,为冬虫夏草繁育奠定了基础。     

Structure of insect chitin isolated from beetle larva cuticle and silkworm (Bombyx mori) pupa exuvia

Chitin samples in a alpha-form structure were isolated from beetle larva cuticle and silkworm (Bombyx mori) pupa exuvia by treatment with 1 N HCl and 1 N NaOH. Chitosan was prepared by treating them in 40% NaOH containing NaBH(4). Chitin and chitosan were analyzed by X-ray, [13C]CP/MAS NMR, [13C]FT-NMR, and scanning electron microscopy (SEM) methods. Insect chitin degraded more readily than shrimp chitin when treated with 6 N HCl and the enzyme-chitinase. After treatment with 2 N HCl at 100 degrees C, the insect chitin crystallinity increased. N-deacetylation of insect chitin was easier than that of crustaceous chitin, and about 94% of the N-acetyl groups were removed in one treatment with 40% NaOH for 4 h at 110 degrees C. After treatment with 2 N HCl, 55% of the N-acetyl groups of silkworm chitin were removed under the same conditions. Beetle chitin showed a higher affinity for chitinase than shrimp chitin.     

Studies on chitosan: 2. Solution stability and reactivity of partially N-acetylated chitosan derivatives in aqueous media

The stability of the solutions of partially N-acetylated chitosans was studied by two methods: (1) 1% solutions of the chitosan derivatives in 0.1 M aqueous acetic acid were added dropwise to buffer solutions with pH from 8.6 to 12 and to a 0.1 M NaOH solution; (2) to each 0.5% solution of the derivatives in 0.1 M acetic acid was added the desired amount of a 1 M NaOH solution. The stability data obtained were summarized with respect to the degree of N-acetylation. It was found that the solutions of the derivatives with more than 50% acetyl content were stable even in alkaline conditions and the gelation and precipitation of the solutions did not occur. The reactivity of the derivatives with the degree of N-acetylation of more than 50% was studied using methyl 4-azidobenzoimidate (MABI) and ethylene glycol diglycidyl ether in homogeneous states. It was found that MABI reacted with amino groups of the chitosans only at neutral pH and glycidyl groups reacted at neutral and alkaline pH. It seems that these unique properties of chitosans with a degree of N-acetylation of more than 50% will enable us to prepare new chitosan derivatives.     

Stability of glucose oxidase and catalase adsorbed on variously activated 13X zeolite

The use of 13X zeolite (0.1-0.4-mm granules), treated with 2N and 0.01N HCI, 0.01M citric acid, 0.1M citric-phosphate buffer (pH 3.6), and in untreated form to adsorb glucose oxidase of fungal origin and microbial catalase was examined. Physicochemical analysis of the support demonstrated that its crystalline structure, greatly altered by the HCl and buffer, could be partially maintained with citric acid. The specific adsorption of the enzymes increased with decreasing pH and proved to be considerable for all the supports. The stability with storage at 25 degrees C is strictly correlated with the titrable acidity of the activated zeolite expressed as meq NaOH/g and with pH value of the activation solution. It proved to be lower than 55 h for both enzymes if adsorbed on zeolite treated with 2N HCl, and 15-fold and 30-fold higher for glucose oxidase and catalase adsorbed, respectively, on zeolite treated with the 0.1M citric-phosphate buffer and 0.01M citric acid. The specific adsorption of glucose oxidase and catalase was, respectively, 1840 U/g at pH 3.0 and 6910 U/g at pH 5.0. Their half-life at 25 degrees C with storage at pH 3.5 for the former and at pH 5.0 for the latter was 800 and 1560 h vs. 40 and 110 h for the corresponding free enzymes.     

Effect of the Degree of Acetylation of Chitosan on Its Enzymatic Hydrolysis with the Preparation Celloviridin G20kh

The degree of acetylation was shown to exert only insignificant effects on the enzymatic hydrolysis of chitosan, while affecting the composition of the resulting hydrolysates and their water solubility. Chitosan with various degrees of acetylation was produced by reacetylation of the initial chitosan (the solvents, methanol and 2% acetic acid, were present in a ratio of 54 : 51 v/v; the amount of acetic anhydride was in the range 0.1–2.0 mmol per gram chitosan). Hydrolysis by the enzymatic preparation Celloviridin G20kh was performed at an enzyme-to-substrate ratio of 1 : 400 in sodium–acetate buffer, pH 5.2 (55°C) for 1 h.     

Extraction and precipitation of chitosan from cell wall of zygomycetes fungi by dilute sulfuric acid

A new method was developed in this work for extraction of chitosan from the zygomycetes cell wall. It is based on the temperature-dependent solubility of chitosan in dilute sulfuric acid. Chitin is soluble in neither cold nor hot dilute sulfuric acid. Similarly chitosan is not soluble at room temperature but is dissolved in 1% H 2SO 4 at 121 degrees C within 20 min. The new method was developed to measure the chitosan content of the biomass and cell wall. The procedures were investigated by measuring phosphate, protein, ash, glucuronic acid, and degree of acetylation. The cell wall derivatives of fungus Rhizomucor pusillus were then examined by this new method. The results indicated 8% of the biomass as chitosan. After treatment with NaOH, the alkali-insoluble material (AIM) contained 45.3% chitosan. Treatment of AIM with acetic acid resulted in 16.5% acetic-acid-soluble material (AcSM) and 79.0% alkali- and acid-insoluble material (AAIM). AcSM is usually cited as pure chitosan, but the new method shows major impurities by, for example, phosphate. Furthermore, AAIM is usually considered to be the chitosan-free fraction, whereas the new method shows more than 76% of the chitosan present in AIM is found in AAIM. It might indicate the inability of acetic acid to separate chitosan from the cell wall.     

G.l.c. of O-methyloxime and alditol acetate derivatives of neutral sugars, hexosamines, and sialic acids: "one-pot" quantitative determination of the carbohydrate constituents of glycoproteins and a study of the selectivity of alkaline borohydride reductions

A new procedure for the quantification by g.l.c. of the carbohydrate constituents of glycoproteins is proposed which involves (a) simultaneous action of neuraminidase and neuraminic acid aldolase, (b) hydrolysis with 4M trifluoroacetic acid at 125 degrees for 1 h, and (c) conversion of the products into O-methyloxime acetates and g.l.c. The procedure has been successfully tested on fetuin, transferrin, alpha 1-acid glycoprotein, and mucin. The g.l.c. conditions used also enabled the complete separation of O-methyloxime and alditol acetate derivatives in one run, so that the release of carbohydrate chains from glycoproteins by treatment with alkaline borohydride can be investigated conveniently. There was complete release of O-linked oligosaccharides from fetuin on treatment with 0.1M NaOH/0.8M NaBH4 (68 h, 37 degrees) or 0.05M KOH/M KBH4 (24 h, 45 degrees) and also release of approximately 75% and 35-40%, respectively, of N-asparagine-linked chains. Reduced oligosaccharides were formed only from O-linked chains; the mechanism by which N-linked chains were released is still not clear.     

Allenic derivatives of nucleic acid components and their transformation products: a new class of biologically active nucleoside analogues

Reaction of adenine (1a) or cytosine (1b) with excess 1,4-dichloro-2-butyne catalyzed by K2CO3 in (CH3)2SO gave the 4-chloro-2-butynyl derivatives 2a and 2b. The latter were converted to the 4-hydroxy-2-butynyl compounds 3a and 3b by refluxing in 0.1 M HCl. Isomerization of 3a in 0.1 M NaOH at 100 degrees C for 1 h gave an equilibrium mixture of 3a and allene 4a. Pure 4a was obtained by column chromatography. Similarly, compound 3b was transformed/0.1 M NaOH, 20% aq. dioxane, 9 h, 100 degrees C/ to a mixture of 3b and 4b from which pure 4b was obtained by chromatography and crystallization. By contrast, reflux of 3a or 3b in 1 M NaOH in 50% aq. dioxane for 1 h afforded cyclized products - dihydrofuryl derivatives 5a and 5b. Hydrogenation of 4a and 5a gave 9-(4-hydroxybutyl)adenine (6a) and 9-(tetrahydro-2-furyl)adenine (7a), respectively. Scope and limitations of allenic isomerization in nucleic acid base series, spectroscopy and biological activity of the obtained products will be discussed.     

Chitin deacetylase product inhibition

Chitin deacetylase is the only known enzyme catalyzing the hydrolysis of the acetamino linkage in the N-acetylglucosamine units of chitin and chitosan. This reaction can play an important role in enzymatic production of chitosan from chitin, or in enzymatic modification of chitosan, which has applications in medicine, pharmacy or plant protection. It was previously shown that acetic acid, a product of the deacetylation process, may act as an inhibitor of chitin deacetylase. Here we show the mechanism of inhibition of chitin deacetylase isolated from Absidia orchidis vel coerulea by acetic acid released during the deacetylation process. The process follows competitive inhibition with respect to acetic acid with an inhibition constant of K(i) = 0.286 mmol/L. These results will help to find the optimal system to carry out the enzymatic deacetylation process for industrial applications.     

Optimization of physiological factors for direct saccharification of cassava starch to glucose by Rhizopus oligosporus 145f

Direct saccharification of 2.64% cassava starch by Rhizopus oligosporus 145F was attempted under various cultural conditions. Maximum glucose yield of 18.0 g/L culture filtrate was obtained with an initial pH 3.8, 2% (v/v) inoculum of R. oligosporus spores, and an incubation temperature of 45 degrees C in shake flask cultures for 48 h. This concomitantly produced 2.7 g mycelia/100g cassava starch containing 20.2% true protein. The production of glucose and mycelia was accomplished with 92.8% starch saccharification having 67.9% starch to glucose conversion efficiency.     

Chitosan production from hemicellulose hydrolysate of corn straw: impact of degradation products on Rhizopus oryzae growth and chitosan fermentation

Aims: To examine the potential use of hemicellulose hydrolysate (HH) for the production of chitosan by Rhizopus oryzae and investigate the influence of contents in HH on mycelia growth and chitosan synthesis. Methods and Results: Compared to xylose medium, HH enhanced mycelia growth, chitosan content and production of R. oryzae by 10·2, 64·5 and 82·1%, respectively. During sulfuric acid hydrolysis of corn straw, sugars (glucose, galactose, etc) and inhibitors (formic acid, acetic acid and furfural) were generated. Acetic acid (2·14 g l^?1) and formic acid (0·83 g l^?1) were stimulative, while furfural (0·55 g l^?1) was inhibitory. Inhibitors, at different concentrations, increased the mycelia growth and chitosan production by 24·5–37·8 and 60·1–207·1%. Conclusions: HH of corn straw is a good source for chitosan production. Inhibitors in HH, at proper concentrations, can enhance chitosan production greatly. Significance and Impact of the Study: This work for the first time reported chitosan production from HH. Chitosan production can be greatly enhanced by cheap chemicals such as inhibitors in HH.     

Biosorption of heavy metals using whole mold mycelia and parts thereof.

Biosorption of heavy metals was carried out using whole mycelia and selected components of Aspergillus niger, Rhizopus oryzae and Mucor rouxii. Binding of copper, cadmium, nickel and zinc was considerably improved by treating the cell wall fraction with 4 M NaOH at 121 degrees C. Chitosan contributed most to the biosorptive capacity. 0.96 mmol copper was bound by 1 g of the treated mycelium of M. rouxii DSM 1191.     

Reactions of 4 methylphenyl isocyanate with amino acids

Arylisocyanates are important intermediates in the chemical industry. Amongst the main damage after low levels of isocyanate exposure are lung sensitization and asthma. Protein adducts of isocyanates might be involved in the aetiology of sensitization reactions. Blood protein adducts are used as dosimeters for modifications of macromolecules in the target organs where the disease develops. To develop methods for the quantitation of protein adducts we reacted 4 methylphenyl isocyanate 4MPI with the tripeptide valyl glycyl glycine and with single amino acids yielding N 4 methylphenyl carbamoyl L valyl glycyl glycine 4MPI Val Gly Gly, N 4 methylphenyl carbamoyl L valine 4MPI Val, N 4 methylphenyl carbamoyl L aspartic acid 4MPI Asp, N acetyl S 4 methylphenyl carbamoyl L cysteine 4MPI AcCys, N acetyl N 4 methylphenyl carbamoyl lysine 4MPI AcLys, N acetyl O 4 methylphenyl carbamoyl tyrosine 4MPI AcTyr and N acetyl O 4 methylphenyl carbamoyl D,L serine 4MPI AcSer. The hydrolysis of the adducts was tested under acidic and basic conditions, to obtain the maximum yield of 4 methylaniline 4MA. The isocyanates were hydrolysed for 1 h, 3h and 24h at 100 C with 6 M HCl in and or 0.1 M NaOH at room temperature, following methods applied for the analyses of biological samples of arylisocyanate exposed workers. In addition, we applied a new protocol: the adducts were hydrolyzed for 1-24 h in 0.3 M NaOH at 100 C. The hydrolysates were analysed using HPLC with UV detection and quantified against the internal standard, 4 fluoroaniline or 4 chloroaniline. 4MA was obtained with the best yields using 0.3M NaOH; after 24 h all amino acid adducts were cleaved under these conditions. Acid hydrolysis of 4MPI Val and 4MPI Asp yielded the respective hydantoins 3 4 methylphenyl 5 isopropyl 1,3 imidazoline 2,4 dione and 2 1 4 methylphenyl 2,5 dioxoperhydro 4 imidazolyl acetic acid. For future studies, we propose to hydrolyse biological samples with 0.3 M NaOH at 100 C to release the maximum amount of 4MA from the adducts. However, in biological samples from workers, hydrolysable adducts can also result from arylamine exposure. Therefore, we propose to analyse the N terminal adducts of isocyanates with blood protein to distinguish between arylamine and arylisocyanate exposure.     

Reactions of 4 methylphenyl isocyanate with amino acids

Arylisocyanates are important intermediates in the chemical industry. Amongst the main damage after low levels of isocyanate exposure are lung sensitization and asthma. Protein adducts of isocyanates might be involved in the aetiology of sensitization reactions. Blood protein adducts are used as dosimeters for modifications of macromolecules in the target organs where the disease develops. To develop methods for the quantitation of protein adducts we reacted 4 methylphenyl isocyanate 4MPI with the tripeptide valyl glycyl glycine and with single amino acids yielding N 4 methylphenyl carbamoyl L valyl glycyl glycine 4MPI Val Gly Gly , N 4 methylphenyl carbamoyl L valine 4MPI Val , N 4 methylphenyl carbamoyl L aspartic acid 4MPI Asp , N acetyl S 4 methylphenyl carbamoyl L cysteine 4MPI AcCys , N acetyl N 4 methylphenyl carbamoyl lysine 4MPI AcLys , N acetyl O 4 methylphenyl carbamoyl tyrosine 4MPI AcTyr and N acetyl O 4 methylphenyl carbamoyl D,L serine 4MPI AcSer . The hydrolysis of the adducts was tested under acidic and basic conditions, to obtain the maximum yield of 4 methylaniline 4MA . The isocyanates were hydrolysed for 1 h, 3h and 24h at 100 C with 6 M HCl in and or 0.1 M NaOH at room temperature, following methods applied for the analyses of biological samples of arylisocyanate exposed workers. In addition, we applied a new protocol: the adducts were hydrolyzed for 1-24 h in 0.3 M NaOH at 100 C. The hydrolysates were analysed using HPLC with UV detection and quantified against the internal standard, 4 fluoroaniline or 4 chloroaniline. 4MA was obtained with the best yields using 0.3M NaOH; after 24 h all amino acid adducts were cleaved under these conditions. Acid hydrolysis of 4MPI Val and 4MPI Asp yielded the respective hydantoins 3 4 methylphenyl 5 isopropyl 1,3 imidazoline 2,4 dione and 2 1 4 methylphenyl 2,5 dioxoperhydro 4 imidazolyl acetic acid. For future studies, we propose to hydrolyse biological samples with 0.3 M NaOH at 100 C to release the maximum amount of 4MA from the adducts. However, in biological samples from workers, hydrolysable adducts can also result from arylamine exposure. Therefore, we propose to analyse the N terminal adducts of isocyanates with blood protein to distinguish between arylamine and arylisocyanate exposure.     

Chelating,film-forming,and coagulating ability of the chitosan–glucan complex from Aspergillus niger industrial wastes

Waste mycelia of Aspergillus niger from a citric acid production plant are simply treated with boiling 30–40% NaOH aqueous solutions for 4–6 hr to obtain the insoluble chitosan-glucan complex whose infrared, ESR, and x-ray diffraction spectra are reported. A number of transition- and post-transition-metal are chelated and collected by chitosan-glucan with higher yields than by animal chitosan. Immediate flocculation occur upon mixing chitosan-glucan dispersions with alginate and polymolybdate solutions. Membranes are also obtained from chitosan–glucan dispersions in acetic acid or in chloral and dimethyl formamide mixtures.     

Ethanol production from cotton-based waste textiles

Ethanol production from cotton linter and waste of blue jeans textiles was investigated. In the best case, alkali pretreatment followed by enzymatic hydrolysis resulted in almost complete conversion of the cotton and jeans to glucose, which was then fermented by Saccharomyces cerevisiae to ethanol. If no pretreatment applied, hydrolyses of the textiles by cellulase and beta-glucosidase for 24 h followed by simultaneous saccharification and fermentation (SSF) in 4 days, resulted in 0.140-0.145 g ethanol/g textiles, which was 25-26% of the corresponding theoretical yield. A pretreatment with concentrated phosphoric acid prior to the hydrolysis improved ethanol production from the textiles up to 66% of the theoretical yield. However, the best results obtained from alkali pretreatment of the materials by NaOH. The alkaline pretreatment of cotton fibers were carried out with 0-20% NaOH at 0 degrees C, 23 degrees C and 100 degrees C, followed by enzymatic hydrolysis up to 4 days. In general, higher concentration of NaOH resulted in a better yield of the hydrolysis, whereas temperature had a reverse effect and better results were obtained at lower temperature. The best conditions for the alkali pretreatment of the cotton were obtained in this study at 12% NaOH and 0 degrees C and 3 h. In this condition, the materials with 3% solid content were enzymatically hydrolyzed at 85.1% of the theoretical yield in 24 h and 99.1% in 4 days. The alkali pretreatment of the waste textiles at these conditions and subsequent SSF resulted in 0.48 g ethanol/g pretreated textiles used.