Restriction endonuclease BamHI cleaves bacteriophage Mu DNA within cistrons E and F

We have cleaved phage Mu DNA with restriction endonucleases EcoRI and BamHI and have cloned three specific DNA fragments from the middle of the Mu genome into vector plasmid pBR322. By marker rescue experiments, we have determined that the two BamHI cleavage sites in Mu DNA occur within cistrons E and F.     

The bacteriophage Mu transposase protein can form high-affinity protein-DNA complexes with the ends of transposable elements of the Tn 3 family

The 37 kb transposable bacteriophage Mu genome encodes a transposase protein which can recognize and bind to a consensus sequence repeated three times at each extremity of its genome. A subset of this consensus sequence (5'-PuCGAAA(A)-3') is found in the ends of many class II prokaryotic transposable elements. These elements, like phage Mu, cause 5 bp duplications at the site of element insertion, and transpose by a cointegrate mechanism. Using the band retardation assay, we have found that crude protein extracts containing overexpressed Mu transposase can form high-affinity protein-DNA complexes with Mu att R and the ends of the class II elements Tn 3 (right) and IS101. No significant protein-DNA complex formation was observed with DNA fragments containing the right end of the element IS102, or a non-specific pBR322 fragment of similar size. These results suggest that the Mu transposase protein can specifically recognize the ends of other class II transposable elements and that these elements may be evolutionarily related.     

Regulation of the ColV plasmid-determined iron (III)-aerobactin transport system in Escherichia coli.

Regulation by iron was studied in Escherichia coli strains whose iron supply was entirely dependent on the iron(III)-aerobactin system determined by the ColV plasmid. By the insertion of phage Mu (Ap lac) into the ColV plasmid, mutants were selected that could no longer grow in iron-limited media. The inserted Mu (Ap lac) strongly reduced the amount of aerobactin and he cloacin receptor protein formed by the cells. Their production was no longer subject to regulation by iron. The Mu (Ap lac) insertion apparently led to a polar effect on the expression of the presumably closely linked genes that control the synthesis of aerobactin and the cloacin receptor protein. The expression of the beta-galactosidase gene on the inserted phage genome came under the control of the iron state of the cells. Under iron-limited growth conditions, the amount of beta-galactosidase synthesized was, depending on the strain studied, 6 to 30 times higher than under iron-sufficient growth conditions. In fur mutants with an impaired iron regulation of ll iron supply systems studied so far, high amounts of beta-galactosidase were synthesized independent of the cells' iron supply. The results demonstrate an iron-controlled promoter on the ColV plasmid which is subject to regulation by the chromosomal fur gene.     

Construction and characterization of new cloning vehicles. III. Derivatives of plasmid pBR322 carrying unique Eco RI sites for selection of Eco RI generated recombinant DNA molecules.

In vitro recombinant DNA techniques were used to construct two new cloning vehicles, pBR324 and pBR235. These vectors, derived from plasmid pBR322, are relaxed replicating elements. Plasmid pBR324 carries the genes from pBR322 coding for resistance to the antibiotics ampicillin (Apr) and tetracycline (Tcr) and the colicin E1 structural and immunity genes derived from plasmid pMBI. Plasmid pBR325 carries the Apr and Tcr genes from pBR322 and the cloramphenicol resistance gene (Cmr) from phage P1Cm. In these plasmids the unique EcoRI restriction site present in the DNA molecule is located either in the colicin E1 structural gene (pBR324) or in the Cmr gene (pBR325). These vectors were constructed in order to have a single EcoRI site located in the middle of a structural gene which when inactivated would allow, for the easy selection of plasmid recombinant DNA molecules. These plasmids permit the molecular cloning and easy selection of EcoRI, BamHI, HindIII, PstI, HincII, SalI, (XamI), Smal, (XmaI), BglII and DpnII restriction generated DNA molecules.     

A set of synthetic oligodeoxyribonucleotide primers for DNA sequencing in the plasmid vector pBR322

Seven oligonucleotide primers complementary to the plasmid vector pBR322 at positions adjacent to five of the unique restriction endonuclease cleavage sites (EcoRI, HindIII, BamHI, SalI and PstI) have been chemically synthesized. The polarity of the primers is such that any DNA inserted at one or a combination of two of the above restriction sites may be sequenced by the chain termination method using one of the synthetic DNA primers. One of the primers for sequencing inserts at the PstI site of pBR322 is also complementary to the M13 phage vector designated bla6. This set of universal primers is useful for rapid sequence determination of DNA cloned into pBR322 or M13bla6.     

In vitro and in vivo manipulations of bacteriophage Mu DNA: cloning of Mu ends and construction of mini-Mu's carrying selectable markers

Recombinant plasmids carrying one or both ends of the bacteriophage Mu genome were constructed by molecular cloning. Transposable mini-Mu's with selectable markers (ampicillin resistance, kanamycin resistance or the entire lac operon of Escherichia coli) inserted between the Mu ends were also constructed. As a source of lac operon DNA, a pBR322 derivative with a 27 kb insert containing the lac operon was constructed. The plasmids with both ends of Mu (mini-Mu's) conferred full Mu immunity upon the host cells. However, the same mini-Mu's containing kan or lac inserts were defective in immunity. A summary of the construction and physical characterization, including restriction endonuclease cleavage maps and some of the biological properties of the plasmids, is presented.     

The plasmid cloning vector pBR325 contains a 482 base-pair-long inverted duplication

The plasmid pBR325 is a cloning vector constructed in vitro by addition of the chloramphenicol resistance (Cmr) gene of an IS1-flanked transposon to pBR322 (Bolivar, 1978). It is a 5 995 bp plasmid carrying no sequence originating from IS1. DNA-sequence data suggest that its Cmr segment was derived from a Cm transposon longer than Tn9. The plasmid pBR325 carries between the Cmr and Tcr genes a 482 bp sequence which duplicates, in the opposite orientation, a section pf pBR322 located at the end of the tcr gene. The same structure was found in pBR328, a deletion derivative of pBR325 (Soberon et al., 1980). The possible implications of this inverted duplication on cloning experiments are discussed.     

Cloning vectors that yield high levels of single-stranded DNA for rapid DNA sequencing

We have constructed chimeric plasmid vectors with the origin and intergenic region from M13 phage cloned into the PvuII ( pZ145 ) and AhaIII ( pZ150 , pZ152 ) sites of pBR322. In the absence of M13 phage, these plasmids replicate like any other ColE1-derived plasmid and confer both ampicillin and tetracycline resistance (Amp, Tet). Upon infection with M13 phage, the viral origin present on the plasmids permits phage-directed plasmid replication and results in high yields of single-stranded (ss) plasmid DNA in M13-like particles. This ssDNA, which represents only one of the plasmid strands, is useful as a substrate for rapid DNA sequence determination by the dideoxy sequencing method described by Sanger et al. (1977). Since these plasmids contain an intact pBR322, the intergenic region can be transferred onto most pBR322 derivatives to yield ss plasmid DNA without affecting the recipient plasmid for further studies. We also constructed a deletion derivative of pZ145 , plasmid pZ146 , that does not exhibit interference with the growth of the M13 helper, although this plasmid is encapsidated into phage particles. This result confirms the theory that the intergenic region consists of two domains: one domain being a segment involved in phage morphogenesis and the other being a region of functional origin which interferes with M13 replication.     

IS30, a new insertion sequence of Escherichia coli K12

Summary Three independent spontaneous mutations of prophage P1 affecting the ability of the phage to reproduce vegetatively are due to the insertion of a mobile genetic element, called IS 30. The same sequence is also carried in the R plasmid NR 1-Basel, but not in the parental plasmid NR 1. Southern hybridisation study indicates that the Escherichia coli K 12 chromosome carries several copies of IS 30 as a normal resident. IS 30 is 1.2 kb long and contains unique restriction cleavage sites for Bg/II, ClaI, HindIII, NciI and HincII, and it is cleaved twice by the enzymes HpaII and TaqI. The ends of IS 30 are formed by 26 bp long inverted repeats with 3 bases mismatched. Upon transposition IS 30 generates a duplication of only 2 bp of the target. The following observations suggest a pronounced specificity in target selection by IS 30. In transposition to the phage P 1 genome a single integration site was used three times independently, and in both orientations. A short region of sequence homology has been identified between the P 1 and NR 1-Basel insertion sites. IS 30 has mediated cointegration as well as deletion. The entire IS 30 sequences were duplicated in the cointegrates between a pBR 322 derivative containing IS 30 and the genome of phage P 1–15, and several loci on the P1–15 genome served as fusion sites, some of which were used more than once.     

An inverted repeat sequence of the IncFI plasmid ColV2-K94 increases multimerization-mediated plasmid instability

A detailed physical map of the region of the IncFI plasmid ColV2-K94 containing the Rep1 replicon, a Tn903 transposon, and an inverted repeat structure (X1) with unknown properties was prepared by cloning restriction fragments into pBR325. Inserts carrying the 1.2 kb repeated sequence of X1, but not the IS903 sequence of Tn903, had a destabilizing effect on pBR325 and pBR322 plasmid maintenance. One of these derivatives, pWS139, was studied further and was shown to have elevated levels of multimeric DNA forms; this resulted in decreased copy number and plasmid instability, as multimerization reduces the effective number of randomly segregating plasmids per cell. A ColV2-K94 miniplasmid, which has a copy number much lower than that of ColE1-derived vectors, was also less stably inherited if it contained the X1 structure. This destabilizing effect of the X1 repeat sequence was dependent on the RecA function, but not the RecB or the RecC functions of the host. These results suggest that the inverted repeat sequence of the X1 structure serves as a 'hot-spot' for generalized recombination. Thus, when present in cis, this sequence can generate plasmid instability because plasmid molecules are readily converted into multimeric forms through enhanced recombination at this site.     

The site-specific deletion in plasmid pBR322

The formation of a deletion derivative of plasmid pBR322, designated pBR322 delta 1, was observed during cloning of various eukaryotic DNAs, when the BamHI site of the plasmid vector was used for construction of the recombinant molecules. The restriction analysis of six independently isolated pBR322 delta 1 plasmids allowed establishment of their complete identity. Similar deletion derivatives were also formed as a result of transformation of Escherichia coli cells by the linear form of vector pBR322 produced by BamHI cleavage, but not by SalI or HindIII. The endpoints of the deletion in one of the pBR322 delta 1 plasmids occurred at positions 375 and 16666 bp from the EcoRI site, as determined by sequence analysis. Formation of pBR322 delta 1 is most probably due to site-specific recombination between the sequence in the 1666-1670 bp region and the BamHI end of the linear pBR322 molecule. THe deletion was not controlled by the recA system of the host bacteria.     

Recombination between bacteriophage T4 and plasmid pBR322 molecules containing cloned T4 DNA

Reciprocal recombination between T4 DNA cloned in plasmid pBR322 and homologous sequences in bacteriophage T4 genomes leads to integration of complete plasmid molecules into phage genomes. Indirect evidence of this integration comes from two kinds of experiments. Packaging of pBR322 DNA into mature phage particles can be detected by a DNA--DNA hybridization assay only when a T4 restriction fragment is cloned in the plasmid. The density of the pBR322 DNA synthesized after phage infection is also consistent with integration of plasmid vector DNA into vegetative phage genomes. Direct evidence of plasmid integration into phage genomes in the region of DNA homology comes from genetic and biochemical analysis of cytosine-containing DNA isolated from mature phage particles. Agarose gel electrophoresis of restriction endonuclease-digested DNA, followed by Southern blot analysis with nick-translated probes, shows that entire plasmid molecules become integrated into phage genomes in the region of T4 DNA homology. In addition, this analysis shows that genomes containing multiple copies of complete plasmid molecules are also formed. Among phage particles containing at least one integrated copy, the average number of integrated plasmid molecules is almost ten. A cloning experiment done with restricted DNA confirms these conclusions and illustrates a method for walking along the T4 genome.     

The nucleotide sequence of IS5 from Escherichia coli

A 3-kb fragment of Haemophilus haemolyticus DNA which carries the HhaII restriction (r) and modification (m) genes has been cloned into the PstI site of pBR322 (Mann et al., 1978). When propagated in Escherichia coli, it was observed that spontaneous insertions of IS5 inactivated the restriction gene, producing r- mutants at a frequency of 10(-6). Electron microscopy, restriction-site mapping and sequence analysis of two r- plasmids have demonstrated the presence of IS5 at a single target site in both possible orientations. The complete nucleotide sequence of IS5 has been determined. It is 1195 bp long and has inverted terminal repeats of 16 bp. The target site for IS5 in this plasmid is 5'-CTAG. Approx. ten copies of IS5 were found to be present at about the same locations on the E. coli chromosome in various K-12 strains, using Southern hybridization analysis.     

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.     

Bacteriophage lambda and plasmid vectors, allowing fusion of cloned genes in each of the three translational phases.

We have constructed vectors from bacteriophage lambda and from plasmid pBR322 having a single EcoRI restriction site which is immediately downstream from the lac UV5 promotor. Each vector allows the fusion of a cloned gene to the lac Z gene in a different phase relative to the translation initiation codon of the lac Z gene. These vectors were constructed through modification of the initial EcoRI restriction site by S1 endonuclease treatment and then addition of octadeoxyribonucleotides (EcoRI linkers), which shifted the restriction site by 2 or 4 nucleotides. Used in combination these vectors should allow translation of a cloned gene in any one of the three coding phases. The bacteriophages vectors are certified as B2 (EK2) safety level vectors by the French "recombinaison génétique in vitro" committee (D.G.R.S.T.).     

Structural instability of co-integrates formed during interaction of plasmid R57 with pB322 and RP1. Possible role of IS1 element in the degradation of co-integrates

The conjugative plasmid R57 determines resistance to ampicillin and chloramphenicol. Earlier it was shown that R57 encodes site-specific recA-independent recombinase, which acts in cis and resolves IS1-mediated cointegrates arising in the Escherichia coli recA cells between R57 and pBR322. In the present work the properties of the cointegrates between R57 and pBR322 or RP1 arising in the E. coli rec+ strains were studied. It was found that the cointegrates between R57 and pBR322, obtained by mating of the respective biplasmid donors of E. coli rec+ and the rec+ recipients, lost as a result of deletion a large DNA segment of R57 containing determinant Cmr. The resulting hybrid replicons preserved determinants Apr and Tcr of pBR322 and the R57 conjugative properties and were structurally identical. By using plasmid RP1ts12, which is temperature-sensitive in replication, it was demonstrated that in cells rec+ the cointegrates between R57 and RP1 are extremely unstable. On storage they undergo structural degradation mainly affecting the RP1 replicon. The degradation products of the hydrid complex had lost their RP1 genes but preserved the R57 functional determinants. For elucidation of the observed phenomena the properties of the IS1-mediated cointegrates between pBR322:Tn9 and plasmid pBR3.1--deletion derivative of RP1 were studied. It was found that insertion of IS1 sometimes resulted in formation of unstable cointegrates capable of resolving and loosing determinant Cmr with a high frequency. It was suggested that IS1 encodes the site-specific recombinase responsible for resolution of the IS1-mediated cointegrates and deletion generation. Expression of this recombinase appears to be dependent on structure of the insertion sites. The possible role of IS1 and recombinase encoded by it in resolution and structural instability of the cointegrates between R57 and pBR322 or RP1 is discussed.