The pH-dependence of the Escherichia coli RNase HII-catalysed reaction suggests that an active site carboxylate group participates directly in catalysis

RNase HII specifically catalyses the hydrolysis of phosphate diester linkages contained within the RNA portion of DNA/RNA hybrids. The catalytic parameters of the enzyme derived from Escherichia coli BL21 have been measured using 5'-fluorescent oligodeoxynucleotide substrates containing embedded ribonucleotides. The products of the reaction and the chemistry of phosphate diester hydrolysis were assigned unequivocally using mass spectrometry. The pH-dependence of the catalytic parameters was measured under conditions of optimal magnesium ion concentration. The logarithm of the turnover number of the enzyme increases steeply with pH until a pH-independent region is reached close to neutrality. The slope of the pH-dependent region is 2, indicating that the catalytically proficient form of RNase HII is di-anionic. The pH-dependence of log 1/K(M) is a sigmoidal curve reaching a maximal value at higher pH, suggesting deprotonation of a residue stabilises substrate binding. Possible mechanisms for the RNase HII-catalysed reaction consistent with the pH-dependent behaviour of the enzyme are discussed. The active sites of RNase H enzymes contain a cluster of four strictly conserved carboxylate groups. Together, the data suggest a requirement for ionisation of an active site carboxylic acid for metal ion binding or correct positioning of metal ion(s) in the enzyme-substrate complex and a role for a second active site carboxylate in general base catalysis.     

Structures of the neuronal and endothelial nitric oxide synthase heme domain with D-nitroarginine-containing dipeptide inhibitors bound

In a continuing effort to unravel the structural basis for isoform-selective inhibition of nitric oxide synthase (NOS) by various inhibitors, we have determined the crystal structures of the nNOS and eNOS heme domain bound with two D-nitroarginine-containing dipeptide inhibitors, D-Lys-D-Arg(NO)2-NH(2) and D-Phe-D-Arg(NO)2-NH(2). These two dipeptide inhibitors exhibit similar binding modes in the two constitutive NOS isozymes, which is consistent with the similar binding affinities for the two isoforms as determined by K(i) measurements. The D-nitroarginine-containing dipeptide inhibitors are not distinguished by the amino acid difference between nNOS and eNOS (Asp 597 and Asn 368, respectively) which is key in controlling isoform selection for nNOS over eNOS observed for the L-nitroarginine-containing dipeptide inhibitors reported previously [Flinspach, M., et al. (2004) Nat. Struct. Mol. Biol. 11, 54-59]. The lack of a free alpha-amino group on the D-nitroarginine moiety makes the dipeptide inhibitor steer away from the amino acid binding pocket near the active site. This allows the inhibitor to extend into the solvent-accessible channel farther away from the active site, which enables the inhibitors to explore new isoform-specific enzyme-inhibitor interactions. This might be the structural basis for why these D-nitroarginine-containing inhibitors are selective for nNOS (or eNOS) over iNOS.     

The structure of pepsin. II. Structure of the enzyme active site (at 2 angstroms resolution)

Detailed structure of the pepsin active site in the region of the active aspartic acid residues and substrate binding S1 and S1' sites is considered. At the active site of the enzyme crystals studied several molecules of ethanol were detected, which interact with active groups. The catalytic properties of aspartyl proteinases towards dipeptide substrates were explained on the base of the specific structure of S1 and S1' binding sites.     

Novel inhibition of porcine pepsin by a substituted piperidine. Preference for one of the enzyme conformers

Pepsin inhibition by 3-alkoxy-4-arylpiperidine (substituted piperidine; (3R,4R)-3-(4-bromobenzyloxy)-4-[4-(2-naphthalen-1-yl-2-oxo-ethoxy)phenyl]piperidine) has been studied using steady-state kinetic and pre-equilibrium binding methods. Data were compared with pepstatin A, a well known competitive inhibitor of pepsin. Steady-state analysis reveals that the substituted piperidine likewise behaves as a competitive inhibitor. Pre-equilibrium binding studies indicate that the substituted piperidine can displace a fluorescently labeled statine inhibitor from the enzyme active site. Simulation of the stopped-flow fluorescence transients provided estimates of the K(d) values of 1.4 +/- 0.2 microm and 39 +/- 2 nm for the piperidine and the fluorescently labeled statine, respectively. The effects of combinations of these two inhibitors resulted in a series of parallel lines when plotted by the method of Yonetani and Theorell (Yonetani, T., and Theorell, H. (1964) Arch. Biochem. Biophys. 106, 234-251), suggesting that the two inhibitors bind in a mutually exclusive fashion to pepsin. Fitting of the entire data set to the appropriate equation yielded an alpha factor of 8 +/- 1. The magnitude of this factor ( infinity > alpha > 1) can be explained by a conformational distinction between the enzyme species that bind each inhibitor. The effects of pH on the inhibition constants for pepstatin A and the substituted piperidine also suggest that the inhibitors bind to distinct conformational forms of the enzyme. No inhibition by the piperidine was observed at acidic pH, while pepstatin A inhibition is maximal at low pH values. Inhibition by the piperidine was maximal when a group with pK 4.8 +/- 0.2 was deprotonated and another group with pK 5.9 +/- 0.2 was protonated. Most likely these two groups are the catalytic aspartates with perturbed ionization properties as a result of a significant and unique conformational change. Taken together, these data suggest that the enzyme can readily interconvert between two conformers, one capable of binding substrate and pepstatin A and the other capable of binding the substituted piperidine.     

Modulation of the catalytic activity of cruzipain, the major cysteine proteinase from Trypanosoma cruzi, by temperature and pH.

Cysteine proteinases are relevant to several aspects of the parasite life cycle and of parasite-host relationships. Here, a quantitative investigation of the effect of temperature and pH on the total substrate inhibition of cruzipain, the major papain-like cysteine proteinase from Trypanosoma cruzi, is reported. Values of the apparent catalytic and inhibition parameters Km, Vmax, Vmax/Km, and K(i) for the cruzipain-catalysed hydrolysis of N-alpha-benzyloxycarbonyl-L-phenylalanyl-L-arginine-(7-amino-4-methylcoumarin) (Z-Phe-Arg-AMC) and azocasein were determined between 10.0 degrees C and 40.0 degrees C and between pH 4.5 and 8.5. Values of Km were independent of temperature and pH, whereas values of Vmax, Vmax/Km, and K(i) were temperature-dependent and pH-dependent. Over the whole pH range explored, values of logVmax, log(Vmax/Km), and logK(i) increased linearly with respect to T(-1). Values of Vmax and Vmax/Km were affected by the acid-base equilibrium of one temperature-independent ionizing group (i.e. pK(unl)' = pK(lig)' = 5.7 +/- 0.1, at 25.0 degrees C). Moreover, values of K(i) were affected by the alkaline pK shift of one ionizing group of active cruzipain (from pK(unl)" = 5.7 +/- 0.1 to pK(lig)" = 6.1 +/- 0.1, at 25.0 degrees C) upon Z-Phe-Arg-AMC binding. Values of logK(unl)', logK(lig)', and logK(lig)" were temperature-independent. Conversely, values of logK(unl)" were linearly dependent on T(-1). As a whole, total substrate inhibition of cruzipain decreased with increasing temperature and pH. These data suggest that both synthetic and protein substrates can bind to the unique active centre of cruzipain either productively or following a binding mode which results in enzyme inhibition. However, allosteric effect(s) cannot be excluded.     

The structure and function of acid proteases. VIII. Purification and characterization of cathepsins D from Japanese monkey lung.

Two kinds of cathepsin D were found in Japanese monkey lung and were named cathepsins D-I and D-II. Cathepsin D-I was partially purified by ammonium sulfate fractionation and DEAE-cellulose column chromatography. It had properties common to other ordinary cathepsins D in terms of the elution position from a DEAE-cellulose column at pH 8.0, the pH-dependence of activity toward acid-denatured hemoglobin, and the molecular weight of 35,000 as determined by Sephadex G-100 gel filtration. On the other hand, cathepsin D-II was purified about 1,000-fold by a combination of ammonium sulfate fractionation and column chromatographies on DEAE-cellulose and Sephadex G-100. It was a very acidic protein as judged from its elution position from a DEAE-cellulose column at pH 8.0, and the high mobility toward the anode on disc gel electrophoresis at pH 8.6. Its molecular weight was determined to be 35,000 by Sephadex G-100 gel filtration and 39,000 by SDS-polyacrylamide gel electrophoresis. It was optimally active at pH 2.8 against acid-denatured hemoglobin as a substrate, showing 80% of the optimal activity at pH 1.0, and almost no activity above pH 4.0. This pH-profile of activity was similar to that of monkey pepsin C (gastricsin). It did not hydrolyze N-acetyl-L-phenylalanyl-3,5-diiodo-L-tyrosine, a synthetic substrate for pepsin, but was inhibited by a series of pepsin inhibitors such as pepstatin, 1,2-epoxy-3-(p-nitrophenoxy)propane, p-bromophenacyl bromide, and diazoacetyl-DL-norleucine methyl ester, although the diazo reagent was a rather weak inhibitor of the enzyme. The amino acid composition of cathepsin D-II was found to be fairly different from those of other cathepsins D. However, it showed a striking resemblance to that of Japanese monkey pepsinogen C, suggesting some evolutionary relationship between them.     

Cloning, expression and characterisation of Erwinia carotovora L-asparaginase

Bacterial L-asparaginases (E.C. 3.5.1.1) have been used as therapeutic agents in the treatment of acute childhood lymphoblastic leukaemia. L-asparaginase from Erwinia carotovora NCYC 1526 (ErA) was cloned and expressed in E. coli. The enzyme was purified to homogeneity by a two-step procedure comprising cation-exchange chromatography and affinity chromatography on immobilised L-asparagine. The enzymatic properties of the recombinant enzyme were investigated and the kinetic parameters (K(m), k(cat)) for a number of substrates were determined. Molecular modelling studies were also employed to create a model of ErA, based on the known structure of the Erwinia chrysanthemi enzyme. The molecular model was used to help interpret biochemical data concerning substrate specificity and catalytic mechanism of the enzyme. The kinetic parameters of selected substrates were determined at various pH values, and the pH-dependence profiles of V(max) and V(max)/K(m) were analyzed. The pH-dependence of V(max) shows one transition in the acidic pH range with pK(a)=5.4, and the pH-dependence of V(max)/K(m) exhibits two transitions with pK(a)=5.4 and 8.5. Based on analysis of alternative substrates and molecular modelling studies, it was concluded that the pK(a) at the acidic pH range corresponds to the active site residues Asp115 or Glu82, whereas the pK(a) observed at the alkaline pH range is not due to substrate amino group ionisation, but rather is the result of enzyme ionisation. The effect of temperature and viscosity on the catalytic activity of the enzyme was also investigated and it was concluded that the rate-limiting step of the catalytic reaction is relevant to structural transitions of the protein. Thermodynamic analysis of the activity data showed that the activation energies are dependent on the substrate, and entropy changes appear to be the main determinant contributing to substrate specificity.     

L-aspartase from Escherichia coli: substrate specificity and role of divalent metal ions

The enzyme L-aspartase from Escherichia coli has an absolute specificity for its amino acid substrate. An examination of a wide range of structural analogues of L-aspartic acid did not uncover any alternate substrates for this enzyme. A large number of competitive inhibitors of the enzyme have been characterized, with inhibition constants ranging over 2 orders of magnitude. A divalent metal ion is required for enzyme activity above pH 7, and this requirement is met by many transition and alkali earth metals. The binding stoichiometry has been established to be one metal ion bound per subunit. Paramagnetic relaxation studies have shown that the divalent metal ion binds at the recently discovered activator site on L-aspartase and not at the enzyme active site. Enzyme activators are bound within 5 A of the enzyme-bound divalent metal ion. The activator site is remote from the active site of the enzyme, since the relaxation of inhibitors that bind at the active site is not affected by paramagnetic metal ions bound at the activator site.     

Kinetics and comparative reactivity of human class I and class IIb histone deacetylases

Histone deacetylase (HDAC) enzymes modulate gene expression through the deacetylation of acetylated lysine residues on histone proteins. They operate in biological systems as part of multiprotein corepressor complexes. To understand the reactivity of isolated HDACs and the contribution of cofactor binding to reactivity, the reaction kinetics of isolated, recombinant human HDACs 1, 2, 3, 6, 8, and 10 were measured using a novel, continuous protease-coupled enzyme assay. Values of k(cat) and k(cat)/K(m) and the pH dependence of these values were determined for the reactions of each isozyme with acetyl-Gly-Ala-(N(epsilon)-acetyl-Lys)-AMC. Values of k(cat) spanned the range of 0.006-2.8 s(-1), and k(cat)/K(m) values ranged from 60 to 110000 M(-1) s(-1). The pH profiles for both k(cat) and k(cat)/K(m) were bell-shaped for all of the HDAC isozymes, with pH optima at approximately pH 8. Values of K(i) for the inhibitor trichostatin A were determined for each isozyme. The inhibition constants were generally similar for all HDAC isozymes, except that the value for HDAC8 was significantly higher than that for the other isozymes. The reaction of HDAC8 with an alternative substrate was performed to assess the steric requirements of the HDAC8 active site, and the effect of phosphorylation on HDAC1 activity was examined. The results are discussed in terms of the biological roles of the HDAC enzymes and the proposed reaction mechanism of acetyllysine hydrolysis by these enzymes.     

Characterization of kinetics and thermostability of Acremonium strictum glucooligosaccharide oxidase

The kinetic and thermostability properties of a glucooligosaccharide oxidase from Acremonium strictum were determined. This enzyme produces only maltobionic acid from maltose. It is most active at pH 9 to 10.5, and is most stable at pH 6.5. Values of both K(M) and V(max) on maltose are highest at pH 10. The highest values of K(M) and V(max) occur with glucose, maltopentaose, and maltoheptaose, whereas the lowest values of K(M) are with maltotriose and of V(max) are with maltohexaose. Values of K(M) with any substrate and at any pH are always substantially above 1 mM. Activation energies for catalysis and thermoinactivation are 23 kJ/mol and 421 kJ/mol, respectively. The N-terminal sequence is not homologous with any other oxidase, but has some homology with other proteins having different functions. These unusual properties suggest that glucooligosaccharides may not be the primary substrates of this enzyme.     

Synthesis of chloromethyl ketone derivatives of fatty acids. Their use as specific inhibitors of acetoacetyl-coenzyme A thiolase, cholesterol biosynthesis and fatty acid synthesis.

A general route for the synthesis of chloromethyl ketone derivatives of fatty acids is described. 5-Chloro-4-oxopentanoic acid, 7-chloro-6-oxoheptanoic acid, 9-chloro-8-oxononanoic acid and 11-chloro-10-oxoundecanoic acid were synthesized by this method and tested as covalent inhibitors of pig heart acetoacetyl-CoA thiolase. The K1 decreased by approx. 20-fold for each pair of methylenes added to the chain length, showing that the initial stage in inhibitor binding occurs at a non-polar region of the protein. This region is probably located at the enzyme active site, since inhibition was prevented by acetoacetyl-CoA or acetyl-CoA but not by CoA. The site of modification by chloromethyl ketone derivatives of fatty acids is restricted to a thiol group, since inactivation of the enzyme was prevented by reversible thiomethylation of the active-site thiol. In contrast, an amino-directed reagent, citraconic anhydride, still inactivated the enzyme, even when the active-site thiol was protected. Evidence that the enzyme thiol was particularly reactive came from studies on the pH-dependence of the alkylation reaction and thiol-competition experiments. Inhibition of the enzyme proceeded suprisingly well at acidic pH values and a 10(5) molar excess of external thiol over active-site thiol was required to prevent inhibition by 0.3 mM-9-chloro-8-oxononanoic acid. In addition to inhibiting isolated acetoacetyl-CoA thiolase, in hepatocytes the chloromethyl ketone derivatives of fatty acids also inhibited chloresterol synthesis, which uses this enzyme as an early step in the biosynthetic pathway. In isolated cells, the chloromethyl ketone derivatives of fatty acids were considerably less specific in their inhibitory action compared with 3-acetylenic derivatives of fatty acids, which act as suicide inhibitors of acetoacetyl-CoA thiolase. However, 9-chloro-8-oxononanoic acid was also an effective inhibitor of both hepatic cholesterol and fatty acid synthesis in mice in vivo, whereas the acetylenic fatty acid derivative, dec-3-ynoic acid, was completely ineffective. The effective inhibitory dose of 9-chloro-8-oxononanoic acid (2.5-5 mg/kg) was substantially lower than the estimated LD50 for the inhibitor (100 mg/kg).     

Characterization of a rhodanese from the cyanogenic bacterium Pseudomonas aeruginosa

Pseudomonas aeruginosa, the rRNA group I type species of genus Pseudomonas, is a Gram-negative, aerobic bacterium responsible for serious infection in humans. P. aeruginosa pathogenicity has been associated with the production of several virulence factors, including cyanide. Here, the biochemical characterization of recombinant P. aeruginosa rhodanese (Pa RhdA), catalyzing the sulfur transfer from thiosulfate to a thiophilic acceptor, e.g., cyanide, is reported. Sequence homology analysis of Pa RhdA predicts the sulfur-transfer reaction to occur through persulfuration of the conserved catalytic Cys230 residue. Accordingly, the titration of active Pa RhdA with cyanide indicates the presence of one extra sulfur bound to the Cys230 Sgamma atom per active enzyme molecule. Values of K(m) for thiosulfate binding to Pa RhdA are 1.0 and 7.4mM at pH 7.3 and 8.6, respectively, and 25 degrees C. However, the value of K(m) for cyanide binding to Pa RhdA (=14 mM, at 25 degrees C) and the value of V(max) (=750 micromol min(-1)mg(-1), at 25 degrees C) for the Pa RhdA-catalyzed sulfur-transfer reaction are essentially pH- and substrate-independent. Therefore, the thiosulfate-dependent Pa RhdA persulfuration is favored at pH 7.3 (i.e., the cytosolic pH of the bacterial cell) rather than pH 8.6 (i.e., the standard pH for rhodanese activity assay). Within this pH range, conformational change(s) occur at the Pa RhdA active site during the catalytic cycle. As a whole, rhodanese may participate in multiple detoxification mechanisms protecting P. aeruginosa from endogenous and environmental cyanide.     

Exploring the active site of tripeptidyl-peptidase II through studies of pH dependence of reaction kinetics

Tripeptidyl-peptidase II (TPP II) is a subtilisin-like serine protease which forms a large enzyme complex (>4MDa). It is considered a potential drug target due to its involvement in specific physiological processes. However, information is scarce concerning the kinetic characteristics of TPP II and its active site features, which are important for design of efficient inhibitors. To amend this, we probed the active site by determining the pH dependence of TPP II catalysis. Access to pure enzyme is a prerequisite for kinetic investigations and herein we introduce the first efficient purification system for heterologously expressed mammalian TPP II. The pH dependence of kinetic parameters for hydrolysis of two different chromogenic substrates, Ala-Ala-Phe-pNA and Ala-Ala-Ala-pNA, was determined for murine, human and Drosophila melanogaster TPP II as well as mutant variants thereof. The investigation demonstrated that TPP II, in contrast to subtilisin, has a bell-shaped pH dependence of k(cat)(app)/K(M) probably due to deprotonation of the N-terminal amino group of the substrate at higher pH. Since both the K(M) and k(cat)(app) are lower for cleavage of AAA-pNA than for AAF-pNA we propose that the former can bind non-productively to the active site of the enzyme, a phenomenon previously observed with some substrates for subtilisin. Two mutant variants, H267A and D387G, showed bell-shaped pH-dependence of k(cat)(app), possibly due to an impaired protonation of the leaving group. This work reveals previously unknown differences between TPP II orthologues and subtilisin as well as features that might be conserved within the entire family of subtilisin-like serine peptidases.     

Inhibition of angiotensin-converting enzyme by angiotensin I analogue peptide inhibitors. A kinetic study

Angiotensin I analogues with a phosphonic acid group replacing the C-terminal carboxyl group were shown to be competitive inhibitors of angiotensin-converting enzyme. This new class of inhibitors was used to study the binding requirements of the angiotensin I-like ligands to the enzyme's active site. These studies indicate that angiotensin-converting enzyme recognizes at least five amino acid residues at the C-terminus of the peptide. The effect of pH on the binding of the most potent inhibitor peptide was compared to Captopril. The two inhibitors showed similar Ki-pH profiles despite their structural differences. Chloride enhanced the binding of the peptide inhibitor at both pH 9.0 and pH 6.5. At pH 9.0 the inhibitor peptide and the anion bind randomly to the enzyme, while at pH 6.5 the mechanism is ordered. In the latter case, the anion binds first to the enzyme.     

Detailed structural analysis of glycosidase/inhibitor interactions: complexes of Cex from Cellulomonas fimi with xylobiose-derived aza-sugars

Detailed insights into the mode of binding of a series of tight-binding aza-sugar glycosidase inhibitors of two fundamentally different classes are described through X-ray crystallographic studies of complexes with the retaining family 10 xylanase Cex from Cellulomonas fimi. Complexes with xylobiose-derived aza-sugar inhibitors of the substituted "amidine" class (xylobio-imidazole, K(i) = 150 nM; xylobio-lactam oxime, K(i) = 370 nM) reveal lateral interaction of the "glycosidic" nitrogen with the acid/base catalyst (Glu127) and hydrogen bonding of the sugar 2-hydroxyl with the catalytic nucleophile (Glu233), as expected. Tight binding of xylobio-isofagomine (K(i) = 130 nM) appears to be a consequence of strong interactions of the ring nitrogen with the catalytic nucleophile while, surprisingly, no direct protein contacts are made with the ring nitrogen of the xylobio-deoxynojirimycin analogue (K(i) = 5800 nM). Instead the nitrogen interacts with two ordered water molecules, thereby accounting for its relatively weaker binding, though it still binds some 1200-fold more tightly than does xylobiose, presumably as a consequence of electrostatic interactions at the active site. Dramatically weaker binding of these same inhibitors to the family 11 xylanase Bcx from Bacillus circulans (K(i) from 0.5 to 1.5 mM) is rationalized for the substituted amidines on the basis that this enzyme utilizes a syn protonation trajectory and likely hydrolyzes via a (2,5)B boat transition state. Weaker binding of the deoxynojirimycin and isofagomine analogues likely reflects the energetic penalty for distortion of these analogues to a (2,5)B conformation, possibly coupled with destabilizing interactions with Tyr69, a conserved, catalytically essential active site residue.     

Chemical mechanism of beta-xylosidase from Trichoderma reesei QM 9414: pH-dependence of kinetic parameters.

The variation of kinetic parameters of beta-xylosidase from Trichoderma reesei QM 9414 with pH was used to elucidate the chemical mechanism of the p-nitrophenyl beta-D-xylopyranoside hydrolysis. The pH-dependence of V and V/K(m) showed that a group on the enzyme with a pK value of 3.20 must be unprotonated and a group with a pK value of 5.20 must be protonated for activity and both are involved in catalysis. Solvent-perturbation studies indicated that these groups are neutral acid type. Temperature dependence of kinetic parameters suggested the stickiness of the substrate at lower temperatures than the optimum and the calculated ionization enthalpies pointed to carboxyl groups as responsible for both pKs. Chemical modification with triethyloxonium tetrafluoroborate and protection with the substrate studies demonstrated essential carboxyl groups on the enzyme. Profiles of pK(i) for D-gluconic acid lactone indicated that a group with a pK value of 3.45 must be protonated for binding and it has been assigned to the carboxyl group of D-gluconic acid formed by lactone ring breakdown in solution.     

Cathepsin B, the lysosomal thiol proteinase of calf liver

Cathepsin B from calf liver was obtained by a method involving preparation of a lysosomal-mitochondrial pellet and treatment of this pellet with acetone. The material was extracted with an acid buffer, pH4.0, and then precipitated from the extract with acetone. The precipitate was dissolved in phosphate buffer, pH7.4, and subjected to gel filtration on Sephadex G-200 and G-100. The cathepsin B emerged in a range of molecular weight much lower than 50000 as a well-defined component. The purity of this material was checked by electrophoresis. To obtain maximum activity the enzyme had to be activated with a chelating agent and a reducing agent (i.e. EDTA and cysteine). A number of different substrates were used. The enzyme was active for the hydrolysis of both peptide bonds and ester bonds and had approximately equal reactivity in the two cases. The pH-dependence of the hydrolysis was the same with both substrates. The binding of the substrates was half-maximal at pH4.5 and at pH6.8. A thiol group occurred in the active centre but this group ought to have a much higher pK than that found in this enzyme.     

Borate inhibits activation of inactive dinitrogenase reductase from Rhodospirillum rubrum

Borate and aminophenylboronic acid were tested as inhibitors of activation of inactive dinitrogenase reductase from Rhodospirillum rubrum. Inhibition was specific for activation because activity of the active form of the enzyme was not inhibited. Inhibition showed the pH-dependence expected if borate inhibits by binding to cis-hydroxy groups of the modifying group found on the inactive enzyme.     

Structural study on the active site of porcine pepsin and Rhizopus chinensis acid protease. Spin labeling with diazoketone reagents

To investigate the active site structures of porcine pepsin and Rhizopus chinensis acid protease (RAP), spin label techniques were applied for these enzymes. Comparison of spin labeled porcine pepsin and RAP suggested that the active site cleft of porcine pepsin was narrower at the top, but wider at the bottom than that of RAP. Addition of pepstatin restricted the motion of the labeled nitroxide radicals. Under alkaline conditions, the enzymes changed their conformation discontinuously and irreversibly to open the active site clefts and to lose the binding ability for pepstatin. The denaturation points of both the enzymes were determined to be pH 6.2.     

Computer-aided molecular modeling of cathepsin E,a possible endothelin-converting enzyme

A three-dimensional model of human cathepsin E, a possible endothelin-converting enzyme, is constructed using computer-aided molecular modeling techniques. The structure of porcine pepsin, another aspartic protease, was used as a template. The final structure, after all gaps and deletions were made, was optimized using the AMBER-4 package. A dipeptide (Trp-Val) representing the substrate was docked in the putative active site and the whole structure was optimized after several runs of minimization and dynamics calculations. The result of this modeling study showed that the structure of cathepsin E is similar to that of porcine pepsin and has three disulfide bonds that are conserved in both enzymes. There are two Asp-Thr-Gly sequences at the active site of enzyme. The active site cavity is large enough to accommodate its substrate.