首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 796 毫秒
1.
We have constructed two miniplasmids, derived from the resistance plasmid R100.1. In one of these plasmids 400 bp of R100.1 DNA have been replaced by DNA from the transposon Tn1000 (gamma-delta). This substitution removes the amino-terminal end of the repA2 coding sequence of R100.1 and results in an increased copy number of the plasmid carrying the substitution. The copy number of the substituted plasmid is reduced to normal levels in the presence of R100.1. The repA2 gene thus encodes a trans-acting repressor function involved in the control of plasmid replication.  相似文献   

2.
A 24-kb plasmid with 21 open reading frames (ORFs) was newly isolated from Corynebacterium glutamicum ATCC 14997 and named pCGR2. Three of its ORFs were indispensable for stable autonomous replication of pCGR2 in C. glutamicum: in the absence of selective pressure, deletion derivatives of pCGR2 containing the three ORFs showed stability in C. glutamicum for over 50 generations. The first of these ORFs encoded replicase repA whose gene product revealed high amino acid sequence similarity to corresponding gene products of C. glutamicum pCG1-family plasmids in general, and to that of pTET3 plasmid repA in particular. The other two ORFs were located upstream of repA and exhibited high sequence similarity to pTET3 parA and parB, respectively. Interestingly, plasmids based on the pCGR2 were compatible not only with those based on different family plasmids (pBL1, pCASE1) but also with those based on pCG1-family plasmid. Plasmids comprising pCGR2 repA showed a copy number of four in C. glutamicum. The number increased to 240 upon introduction of a mutation within the repA origin of the putative promoter for counter-transcribed RNA. This 60-fold increase in copy number should immensely contribute towards enhanced expression of desired genes in C. glutamicum.  相似文献   

3.
Song JY  Choi SH  Byun EY  Lee SG  Park YH  Park SG  Lee SK  Kim KM  Park JU  Kang HL  Baik SC  Lee WK  Cho MJ  Youn HS  Ko GH  Bae DW  Rhee KH 《Plasmid》2003,50(2):145-151
The nucleotide sequence of a 3955-bp Helicobacter pylori plasmid, pHP51 was determined, and two open reading frames, ORF1 and ORF2, were identified. The deduced amino acid sequence of ORF1 was highly conserved (87-89%) among plasmid replication initiation proteins, RepBs. The function of ORF2 was not assigned because it lacked known functional domains or sequence similarity with other known proteins, although it had a HPFXXGNG motif that was also found in the cAMP-induced filamentation (fic) gene. Three kinds of repeats were present on the plasmid outside of the ORFs, including the R1 and R2 repeats that are common in H. pylori plasmids. One 100-bp sequence detected in the noncoding region of pHP51 was highly similar to the genomic sequence of H. pylori 26695.  相似文献   

4.
A new plasmid pCASE1 was isolated from Gram-positive Corynebacterium casei JCM 12072. It comprised a 2.4-kb nucleotide sequence with three ORFs, two of which were indispensable for autonomous replication in Corynebacterium glutamicum. Homology search identified these two ORFs as repA and repB, areas coding proteins involved in plasmid replication. repA sequence showed high similarity to theta-replicating Escherichia coli ColE2-P9 plasmids and even higher similarity to plasmids derived from Gram-positive bacteria belonging to a subfamily of this ColE2-P9 group. An E. coliC. glutamicum shuttle vector was constructed with pCASE1 fragment including repA and repB to transform C. glutamicum and showed compatibility with corynebacterial plasmids from different plasmid families. The copy number of the shuttle vector in C. glutamicum was 13 and the vector showed stability for 102 generations with no selective pressure.  相似文献   

5.
Summary The sequence and genetic organization was determined of the 2508 by lactococcal portion of pFX2, which was derived from a crypticLactococcus lactis subsp.lactis plasmid and used as the basis for construction of a series of lactococcal vectors. A lactococcal plasmid plus origin and two replication protein-coding regions (repA andrepB) were located. RepA has a helix-turn-helix motif, a geometry typical of DNA-binding proteins. RepB shows a high degree of homology to the plasmid replication initiation proteins from other gram-positive bacteria andMycoplasma. The transcribed inverted repeat sequence betweenrepA andrepB could form an attenuator to regulate pFX2 replication. Upstream of theori site, and in a region which was non-essential for replication, a 215 by sequence identical to the staphylococcal plasmid pE194 and carrying the RSA site was identified. The genetic organization of this lactococcal plasmid replicon shares significant similarity with pE194 group plasmids.  相似文献   

6.
7.
8.
Majumdar T  Das B  Bhadra RK  Dam B  Mazumder S 《Plasmid》2011,66(2):79-84
Aeromonas hydrophila strain AO1 isolated from an infected fish was found to be resistant to several quinolones. A plasmid isolated from the strain AO1, termed pBRST7.6, was cloned and sequenced and shown to be 7621 bp in length with a GC content of 60%. Further analysis confirmed that it contained a gene with 100% identity to qnrS2 genes described in plasmids associated with other Aeromonas species, the product of which usually confers increased resistance to quinolones. The plasmid backbone contained a replication initiation module (repA repC) belonging to the IncQ-family and two genes (mobC and mobB), the products of which are putatively involved in plasmid mobilization. Putative iteron-based origin of replication and characteristic oriT like sequences were also present in the plasmid. The result suggests that Aeromonas spp. carrying plasmids with quinolone resistance genes are potential reservoirs of antimicrobial resistance determinants in the environment.  相似文献   

9.
10.
Pseudomonas’ IncP-7 plasmids play significant role in the environmental biodegradative potential and sometimes carry antibiotic-resistance genes. Rms148 plasmid was used as archetypal P-7 plasmid in microbiological incompatibility studies for more then 30 years. However, the structure of its basic replicon was not described until now; furthermore, the phylogenetic relationships between all known plasmids within the IncP-7 group have not yet been studied. In the course of our study, we have constructed two pairs of primers to amplify the main components of the region of the initiation of P-7 replication, and the subsequent screening of repA intragenic polymorphism was performed using the laboratory collection of IncP-7 plasmids. The minimal replicon of Rms148 was determined and its nucleotide sequence was found to be 81–83% identical to repA-oriV of known P-7 plasmids and is considered to fall into a separate clade of the corresponding phylogenetic tree. Additionally, repA group members seem to be more conservative than the putative oriV region. The estimated amino acid sequence and predicted secondary and tertiary structures of Rms148 RepA protein allowed us to make the assumption that the initiation of replication in plasmids of the P-7 incompatibility group is described by the same model as for the unclassified cryptic plasmid pPS10.  相似文献   

11.
Plasmids pRAS3.1 and pRAS3.2 are two closely related, natural variants of the IncQ-2 plasmid family that have identical plasmid backbones except for two differences. Plasmid pRAS3.1 has five 6-bp repeat sequences in the promoter region of the mobB gene and four 22-bp iterons in its oriV region, whereas pRAS3.2 has only four 6-bp repeats and three 22-bp iterons. Plasmid pRAS3.1 was found to have a higher copy number than pRAS3.2, and we show that the extra 6-bp repeat results in an increase in mobB and downstream mobA/repB expression. Placement of repB (primase) behind an arabinose-inducible promoter in trans resulted in an increase in repB expression and an approximately twofold increase in the copy number of plasmids with identical numbers of 22-bp iterons. The pRAS3 plasmids were shown to have a previously unrecognized toxin-antitoxin plasmid stability module within their replicons. The ability of the pRAS3 plasmids to mobilize the oriT regions of two other plasmids of the IncQ-2 family, pTF-FC2 and pTC-F14, suggested that the mobilization proteins pRAS3 are relaxed and can mobilize oriT regions with substantially different sequences. Plasmids pRAS3.1 and pRAS3.2 were highly incompatible with plasmids pTF-FC2 and pTC-F14, and this incompatibility was removed on inactivation of an open reading frame situated downstream of the mobCDE mobilization genes rather than being due to the 22-bp oriV-associated iterons. We propose that the pRAS3 plasmids represent a third, γ incompatibility group within the IncQ-2 family plasmids.Plasmids of the IncQ family are small (<20 kb), have a broad host range, and are highly promiscuous due to their ability to be mobilized very efficiently by self-transmissible plasmids such as the IncP plasmids. They have been divided into two families, IncQ-1 and IncQ-2, based on the amino acid sequence relatedness of their RepA (helicase), RepB (primase), and RepC (DNA-binding) replication proteins and because the mobilization proteins of the two families are unrelated, consisting of three or five genes, respectively (31). IncQ-1 group plasmids include RSF1010 and the near-identical R1162, pDN1, pIE1107, pIE1115, and pIE1130, while IncQ-2 plasmids include pTF-FC2, pTC-F14, and pRAS3.IncQ-2 plasmids pRAS3.1 and pRAS3.2 were isolated in Norway from the fish pathogens Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida, respectively, while investigating plasmids that conferred resistance to tetracycline (21). The two plasmids encode identical replication and mobilization proteins, with the most important differences in the plasmid backbone being that pRAS3.1 has four 22-bp iterons in its oriV region and five 6-bp repeat sequences upstream of its mobB gene, whereas pRAS3.2 has only three iterons and four 6-bp repeat sequences. No biological studies were carried out in the initial report of the pRAS3 plasmids. As a contribution to our studies on the evolution of IncQ plasmids, our longer-term aim is to address the question of why two natural versions of the plasmid exist. Here we report on the major differences in the biology of the two plasmids. In addition, we discovered the presence of repC and mobB genes that were not detected when the sequence of pRAS3 plasmids was previously reported. We also discovered a putative toxin-antitoxin (TA) postsegregational system different from that found in other members of the IncQ plasmids and tested it for functionality.The IncQ-1 plasmids are subdivided into incompatibility groups α, β, and γ, (31), whereas the IncQ-2 plasmids are subdivided into two incompatibility groups, α and β (14). In this work we also report on the incompatibility between the pRAS3 plasmids and other members of the IncQ-2 plasmid family as well as the IncQ-1 family plasmids. Furthermore, we compare the functional relatedness of the pRAS3 mobilization system with that of previously studied IncQ-2 plasmids.  相似文献   

12.
Recently, the extremely thermophilic bacterium Thermus thermophilus HB8 has been demonstrated to harbor a circular plasmid designated by pVV8 in addition to two well-known plasmids, pTT8 and pTT27, and its entire sequence has been determined. The absence of any obvious replication initiation gene in the 81.2 kb plasmid prompted us to isolate its minimum replicon. By in vivo replication assays with fragments deleted in a stepwise manner, a minimum replicon containing a single ORF, TTHV001, was identified. A protein encoded by TTHV001 showed no amino acid sequence similarity to other function-known proteins. As the results of in vivo and in vitro experiments strongly suggested that the TTHV001 protein was involved in the replication initiation of pVV8, the protein and the gene were referred to as RepV and repV, respectively. The RepV protein binds to an inverted repeat sequence within its own repV gene and then triggers the unwinding of the DNA duplex in an A + T-rich region located just downstream from the inverted repeat. The in vivo replication assays with minimum replicon mutants in the RepV binding site or the unwinding region demonstrated that the unwinding in the region by the RepV binding was essential for pVV8 replication initiation.  相似文献   

13.
Alfredson DA  Korolik V 《Plasmid》2003,50(2):152-160
A small cryptic plasmid, pCJ419, was identified in a human clinical isolate of Campylobacter jejuni, cloned and sequenced. pCJ419 is a circular molecule of 4013 bp with a G+C content of 27.1%. The products of four open reading frames (ORFs) share significant sequence similarity with putative proteins from known C. jejuni and Campylobacter coli plasmids. ORF-1 encodes a putative mobilisation protein (Mob). ORF-2 and ORF-3 encode proteins that have high identity to putative RepA and RepB proteins, respectively, of known C. jejuni and C. coli plasmids. ORF-4 encodes a protein that has high identity to a hypothetical protein of unknown function, Cjp32, previously described in a pVir plasmid of C. jejuni. Tandem repeating 22-bp sequences typical of a plasmid replication origin (ori) were identified upstream of the DNA sequences encoding putative replication initiation proteins. An Escherichia coli-Campylobacter shuttle cloning vector, pGU0202, was constructed using plasmid pMW2 that harbours a Campylobacter-derived kanamycin resistance gene [aph(3')-III]. The sequences encoding pCJ419 mob, RepA and RepB proteins were inserted upstream of aph(3')-III resulting in a stable construct of 6174 bp that was used to transform both E. coli and Campylobacter.  相似文献   

14.
Song JY  Park SG  Kang HL  Lee WK  Cho MJ  Park JU  Baik SC  Youn HS  Ko GH  Rhee KH 《Plasmid》2003,50(3):236-241
We have analyzed a Helicobacter pylori plasmid, pHP489. The 1222-bp nucleotide sequence had one open reading frame, a DnaA-binding site, one direct repeat, and three inverted repeats. The (G+C) content of pHP489 was 33.3%. Although the nucleic acid sequence and deduced amino acid sequence were homologous to those of other bacterial plasmid Rep proteins, the degree of similarity was very low. A deletion analysis showed that the Rep protein was not required for the replication of pHP489 in its H. pylori host, but the host replication machinery was needed.  相似文献   

15.
The nucleotide sequence of cryptic plasmid (designated as pBL90) detected in the cells of Brevibacterium lactofermentum DSM 1412 was determined. The length of plasmid DNA is 67826 bp. Comparison of the nucleotide sequence of pBL90 with known plasmid sequences showed no long regions of significant homology. Computer analysis of the plasmid DNA revealed 29 open reading frames (ORFs). The amino acid sequences of 15 ORFs (approximately 25% of plasmid length) have a high (>70%) level of identity to proteins from different plasmids of Corynebacterium representatives, including replicative proteins. Unusual in pBL90 is the presence of replicative genes from two different families and types of replication.  相似文献   

16.
A new plasmid designated pAsa6 from an Aeromonas salmonicida subsp. salmonicida strain isolated from diseased turbot has been characterized. pAsa6 consists of 18536 bp, has a G+C content of 53.8% and encodes 20 predicted open-reading frames (ORFs). Eight ORFs showed homology to transposases, of which six are complete and two are partial IS sequences. Two ORFs showed homology to replication proteins, and six ORFs showed homology to hypothetical proteins. Two ORFs are truncated homologs of putative A. salmonicida sulfatases. Two genes, aopH and sycH encode homologs of an effector protein for which a role in fish colonization by A. salmonicida has been previously reported, and its chaperone, respectively. The results of filter conjugation experiments suggested that pAsa6 is not mobilizable, as it failed to be conjugally-transferred to several species of marine bacteria tested. All the ORFs of pAsa6 with the exception of four copies of a IS1 transposase gene, have a counterpart in the recently sequenced 155-kb A. salmonicida plasmid pAsa5, suggesting either that pAsa6 is a derivative of pAsa5, or that pAsa5 is the result of the fusion of a pAsa6-like plasmid and a larger plasmid of ca. 135-kb. The pAsa6-encoded repA and aopH genes could be PCR-amplified from strains lacking pAsa6, suggesting presence of a large, possibly pAsa5-like plasmid that was not detected on agarose gels, or the existence of chromosome-integrated plasmid sequences. This study demonstrates that genomic locations for the aopH gene different to pAsa5 or pAsa5-like plasmids exist in A. salmonicida.  相似文献   

17.
The origin of replication of plasmid pSC101 contains three directly repeated sequences RS1, RS2, and RS3 separated by 22 bp from two palindromic sequences, IR1 and IR2, which are partially homologous to the direct repeats. These inverted repeat (IR) sequences overlap the promoter of the repA gene which encodes a protein essential for plasmid replication. We have shown that RepA binds to the RS sites as a monomer and to the IR sites as a dimer. The influence of the IR1 site, and of the DNA segment that separates it from RS3, on plasmid copy number control has been studied in detail. We show that the integrity of IR1 is essential for efficient replication and plasmid stability, the critical site extending to the left of IR1 proper. We also show that the presence of IR1 modifies profoundly the binding properties of purified RepA protein to a segment of DNA containing the RS sequences. IR1 is separated from its homologous site on RS3 by approximately four turns of the DNA helix. Replication is abolished if this distance is increased by half a turn of the helix but it is restored if the distance is increased by a whole turn. These results suggest a DNA looping interaction, in the initiation of replication, between the RepA dimer that binds iR1 and the RepA monomers that bind the RS sequences.  相似文献   

18.
The pediocin A-encoding plasmid of Pediococcus pentosaceus 43200, pMD136, was characterized by restriction enzyme analysis. Analysis of its replicon was facilitated by the construction of a probe vector consisting of the Escherichia coli plasmid pSP72 and the cat gene from Staphylococcus aureus plasmid pC194. The replication region of pMD136 was localized on a 1.6-kb EcoRI/BglII fragment. Sequencing analysis revealed a non-coding region, repA, spanning the first 440 bp, followed by an open reading frame, repB, encoding a putative protein of 390 amino acids. The non-coding region contained two sets of 6-bp and two sets of 22-bp direct repeats and two sets of inverted repeats upstream of the open reading frame. Strong homology of the isolated replicon was found to theta-type replicons of Lactococcus lactis plasmids. Segregational stability assay suggested at least two regions as potentially involved in the stabilization of pMD136. The plasmid's strong homology to other theta-type replicons and its relatively high stability suggest that pMD136 belongs to the widespread family of theta-replication plasmids.  相似文献   

19.
Many Helicobacter pylori isolates carry cryptic plasmids of extremely variable size. In this study we analyzed two H. pylori plasmids, pHel4 and pHel5, from H. pylori strains P8 and P29, respectively. Plasmid pHel4 consists of 10,970 bp, constituting 15 putative open reading frames (ORFs), whereas pHel5 consists of 18,291 bp, constituting 17 ORFs. The findings that both plasmids encode a conserved RepA protein and that both have an origin of replication containing an iteron place them in the group of theta plasmids. In pHel4, the products of the overlapping orf4C, orf4D, orf4E, and orf4F sequences are homologous to MobA, MobB, MobC, and MobD, encoded by colicinogenic plasmids, suggesting that pHel4 might be mobilizable. A further putative operon consists of orf4B and orf4A, the products of which are homologous to microcin C7 (MccC7) biosynthesis and secretion proteins MccB and MccC, respectively. Plasmid pHel5 carries putative genes encoding proteins with homology to an endonuclease and gene products of an H. pylori chromosomal plasticity zone. Both plasmids contain repeat sequences, such as the previously identified R2 repeat, which are considered preferred recombination sites. In pHel4, a new repeat sequence (R4 repeat), which seems to act as a hot spot for site-specific recombination, was identified. All H. pylori plasmids characterized so far have a modular structure. We suggest a model that explains the existing plasmids by insertions and deletions of genetic elements at the repeat sequences. A genetic exchange between plasmids and the bacterial chromosome, combined with plasmid mobilization, might add a novel mechanism to explain the high genetic macrodiversity within the H. pylori population.  相似文献   

20.
The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号