Oligonucleotide probes for the detection of Thermoanaerobacter

Based on the analysis of 16S rRNA nucleotide sequences, oligonucleotide probes were designed for the detection and identification of representatives of the genus Thermoanaerobacter. To increase the specificity level of detection, the genus Thermoanaerobacter was divided into three groups. The probe Tab 827 (5'-GCTTCCGCDYCCCACACCTA-3') detected all known representatives of the genus Thermoanaerobacter; the probe Tab_1 844 (5'-TTAACTACGGCACGRAATGCTTC-3') was specific for the first group of the species of the genus (T. wiegelii, T. siderophilus, T. sulfurophilus, T. brockii, T. kivui, T. ethanolicus, T. acetoethylicus, and T. thermohydrosulfuricus); the probe Tab_2 424 (5'-CACTAMYGGGGTTTACAACC-3') targeted the second group (T. thermocopriae, T. mathranii, and T. italicus); and the probe Tab_3 184 (5'-TC-CTCCATCAGGATGCCCTA-3') was specific for the third group (T. tengcongensis, T. yonseiensis, T. subterraneus, and Carboxydibrachium pacificum, an organism related to the genus Thermoanaerobacter according to its 16S rRNA sequence). The oligonucleotide probes were labeled with Dig-11-dUTP. Hybridization with the probes showed the affiliation with Thermoanaerobacter of several pure cultures that were morphologically similar to representatives of this genus but possessed metabolic features unusual for it (capacity for agarose hydrolysis, anaerobic oxidation of CO, growth at low pH values) or were isolated from habitats previously unknown for Thermoanaerobacter (deep-sea hydrothermal vents).     

Oligonucleotide probes for bacterial acylcarrier protein genes

Using a recently-introduced rapid manual method, we have synthesized a family of thirty six individual oligonucleotides of unique sequence (18-mers), which correspond to the conserved amino acid sequence, GADSLD, found at the 4'-phosphopantetheine-binding site of the acylcarrier component of bacterial and plant fatty acid synthases. Hybridisation of each of these oligonucleotides to Southern blots of restricted Streptomyces erythreus DNA under stringent conditions showed that (i) only two probes hybridised specifically, (ii) neither probe hybridised to more than one sequence, and (iii) each probe apparently recognised a different DNA sequence. In the same synthesis, ninety-two other oligonucleotides (15-18-mers) were also constructed, mostly in yields of 2-10%.     

Determinants of binding affinity and specificity for the interaction of TEM-1 and SME-1 beta-lactamase with beta-lactamase inhibitory protein

The hydrolysis of beta-lactam antibiotics by class A beta-lactamases is a common cause of bacterial resistance to these agents. The beta-lactamase inhibitory protein (BLIP) is able to bind and inhibit several class A beta-lactamases, including TEM-1 beta-lactamase and SME-1 beta-lactamase. Although the TEM-1 and SME-1 enzymes share 33% amino acid sequence identity and a similar fold, they differ substantially in surface electrostatic properties and the conformation of a loop-helix region that BLIP binds. Alanine-scanning mutagenesis was performed to identify the residues on BLIP that contribute to its binding affinity for each of these enzymes. The results indicate that the sequence requirements for binding are similar for both enzymes with most of the binding free energy provided by two patches of aromatic residues on the surface of BLIP. Polar residues such as several serines in the interface do not make significant contributions to affinity for either enzyme. In addition, the specificity of binding is significantly altered by mutation of two charged residues, Glu73 and Lys74, that are buried in the structure of the TEM-1.BLIP complex as well as by residues located on two loops that insert into the active site pocket. Based on the results, a E73A/Y50A double mutant was constructed that exhibited a 220,000-fold change in binding specificity for the TEM-1 versus SME-1 enzymes.     

TEM-1 beta-lactamase as a scaffold for protein recognition and assay

A large number of different proteins or protein domains have been investigated as possible scaffolds to engineer antibody-like molecules. We have previously shown that the TEM-1 beta-lactamase can accommodate insertions of random sequences in two loops surrounding its active site without compromising its activity. From the libraries that were generated, active enzymes binding with high affinities to monoclonal antibodies raised against prostate-specific antigen, a protein unrelated to beta-lactamase, could be isolated. Antibody binding was shown to affect markedly the enzyme activity. As a consequence, these enzymes have the potential to be used as signaling molecules in direct or competitive homogeneous immunoassay. Preliminary results showed that beta-lactamase clones binding to streptavidin could also be isolated, indicating that some enzymes in the libraries have the ability to recognize proteins other than antibodies. In this paper, we show that, in addition to beta-lactamases binding to streptavidin, beta-lactamase clones binding to horse spleen ferritin and beta-galactosidase could be isolated. Affinity maturation of a clone binding to ferritin allowed obtaining beta-lactamases with affinities comprised between 10 and 20 nM (Kd) for the protein. Contrary to what was observed for beta-lactamases issued from selections on antibodies, enzyme complexation induced only a modest effect on enzyme activity, in the three cases studied. This kind of enzyme could prove useful in replacement of enzyme-conjugated antibodies in enzyme-linked immunosorbant assays (ELISA) or in other applications that use antibodies conjugated to an enzyme.     

A novel sequence framework (bla(TEM-1G)) encoding the parental TEM-1 beta-lactamase

A novel parental bla(TEM) gene (bla(TEM-1G)), encoding a TEM-1 beta-lactamase (pI of 5.4) produced by the uropathogenic Escherichia coli strain FMV194 was isolated from a dog. We report PCR-restriction fragment length polymorphism analysis and nucleotide sequencing of this gene. The bla(TEM-1G) sequence was identical to the bla(TEM-1C) gene framework in the coding and promoter (P3) regions, except for a silent G(604)-->T mutation in the coding region. Molecular phylogenetic analysis of parental bla(TEM) genes indicated two distinct groups, one comprising bla(TEM-1F) and bla(TEM-2). The other group comprises bla(TEM-1C) which is the probable ancestor of bla(TEM-1A), bla(TEM-1D) and bla(TEM-1G). The bla(TEM-1G) gene has the same framework as a gene encoding an inhibitor-resistant TEM beta-lactamase produced by an E. coli strain of human origin. Thus, parental bla(TEM) genes encoding beta-lactamases in E. coli strains isolated from different host species, in this case human and canine, may be phylogenetically very close.     

Inactivation of TEM-1 beta-lactamase by 6-acetylmethylenepenicillanic acid

6-Acetylmethylenepenicillanic acid is a new kinetically irreversible inhibitor of various beta-lactamases. Interaction between 6-acetylmethylenepenicillanate and purified TEM-1 beta-lactamase during the inactivation process was investigated. 6-Acetylmethylenepenicillanate inhibited the enzyme in a second-order fashion with a rate constant of 0.61 microM-1 . S-1. The apparent inactivation constant decreased in the presence of increasing concentrations of the substrate benzylpenicillin. Native enzyme (pI 5.4) was converted into two inactive forms with pI 5.25 and 5.15, the latter form being transient and readily converted into the more stable form with pI 5.15. Even a 50-fold excess of inhibitor over enzyme did not produce any other inactivated species of the enzyme. All the results obtained suggest that 6-acetylmethylenepenicillanate is a potent irreversible and active-site-directed inhibitor of TEM-1 beta-lactamase.     

Crystal structure and kinetic analysis of beta-lactamase inhibitor protein-II in complex with TEM-1 beta-lactamase

The structure of the 28 kDa beta-lactamase inhibitor protein-II (BLIP-II) in complex with the TEM-1 beta-lactamase has been determined to 2.3 A resolution. BLIP-II is a secreted protein produced by the soil bacterium Streptomyces exfoliatus SMF19 and is able to bind and inhibit TEM-1 with subnanomolar affinity. BLIP-II is a seven-bladed beta-propeller with a unique blade motif consisting of only three antiparallel beta-strands. The overall fold is highly similar to the core structure of the human regulator of chromosome condensation (RCC1). Although BLIP-II does not share the same fold with BLIP, the first beta-lactamase inhibitor protein for which structural data was available, a comparison of the two complexes reveals a number of similarities and provides further insights into key components of the TEM-1-BLIP and TEM-1-BLIP-II interfaces. Our preliminary results from gene knock-out studies and scanning electron microscopy also reveal a critical role of BLIP-II in sporulation.     

Increased folding stability of TEM-1 beta-lactamase by in vitro selection

In vitro selections of stabilized proteins lead to more robust enzymes and, at the same time, yield novel insights into the principles of protein stability. We employed Proside, a method of in vitro selection, to find stabilized variants of TEM-1 β-lactamase from Escherichia coli. Proside links the increased protease resistance of stabilized proteins to the infectivity of a filamentous phage. Several libraries of TEM-1 β-lactamase variants were generated by error-prone PCR, and variants with increased protease resistance were obtained by raising temperature or guanidinium chloride concentration during proteolytic selections. Despite the small size of phage libraries, several strongly stabilizing mutations could be obtained, and a manual combination of the best shifted the profiles for thermal unfolding and temperature-dependent inactivation of β-lactamase by almost 20 °C to a higher temperature. The wild-type protein unfolds in two stages: from the native state via an intermediate of the molten-globule type to the unfolded form. In the course of the selections, the native protein was stabilized by 27 kJ mol^− 1 relative to the intermediate and the cooperativity of unfolding was strongly increased. Three of our stabilizing replacements (M182T, A224V, and R275L) had been identified independently in naturally occurring β-lactamase variants with extended substrate spectrum. In these variants, they acted as global suppressors of destabilizations caused by the mutations in the active site. The comparison between the crystal structure of our best variant and the crystal structure of the wild-type protein indicates that most of the selected mutations optimize helices and their packing. The stabilization by the E147G substitution is remarkable. It removes steric strain that originates from an overly tight packing of two helices in the wild-type protein. Such unfavorable van der Waals repulsions are not easily identified in crystal structures or by computational approaches, but they strongly reduce the conformational stability of a protein.     

Structural insight into the kinetics and DeltaCp of interactions between TEM-1 beta-lactamase and beta-lactamase inhibitory protein (BLIP)

In a previous study, we examined thermodynamic parameters for 20 alanine mutants in beta-lactamase inhibitory protein (BLIP) for binding to TEM-1 beta-lactamase. Here we have determined the structures of two thermodynamically distinctive complexes of BLIP mutants with TEM-1 beta-lactamase. The complex BLIP Y51A-TEM-1 is a tight binding complex with the most negative binding heat capacity change (DeltaG = approximately -13 kcal mol(-1) and DeltaCp = approximately -0.8 kcal mol(-1) K(-1)) among all of the mutants, whereas BLIP W150A-TEM-1 is a weak complex with one of the least negative binding heat capacity changes (DeltaG = approximately -8.5 kcal mol(-1) and DeltaCp = approximately -0.27 kcal mol(-1) K(-1)). We previously determined that BLIP Tyr51 is a canonical and Trp150 an anti-canonical TEM-1-contact residue, where canonical refers to the alanine substitution resulting in a matched change in the hydrophobicity of binding free energy. Structure determination indicates a rearrangement of the interactions between Asp49 of the W150A BLIP mutant and the catalytic pocket of TEM-1. The Asp49 of W150A moves more than 4 angstroms to form two new hydrogen bonds while losing four original hydrogen bonds. This explains the anti-canonical nature of the Trp150 to alanine substitution, and also reveals a strong long distance coupling between Trp150 and Asp49 of BLIP, because these two residues are more than 25 angstroms apart. Kinetic measurements indicate that the mutations influence the dissociation rate but not the association rate. Further analysis of the structures indicates that an increased number of interface-trapped water molecules correlate with poor interface packing in a mutant. It appears that the increase of interface-trapped water molecules is inversely correlated with negative binding heat capacity changes.     

Mechanism of inactivation of TEM-1 beta-lactamase by 6-acetylmethylenepenicillanic acid.

The interaction between 6-acetylmethylenepenicillanic acid (compound Ro 15-1903; AMPA) and TEM-1 beta-lactamase was investigated in order to elucidate the mechanism of action of AMPA. Formation of the enzyme-inhibitor complex (EA) was accompanied by a shift of the absorbance maximum from 292 nm to 303 nm and an increase in the absorption. Regeneration of activity was very slow and incomplete, reaching about one-third of the initial activity after 48 h at 37 degrees C. This behaviour indicated a branched pathway of the decay of the inactivated enzyme. Kinetic and isoelectric-focusing experiments proved this assumption. The first-order constant of regeneration of active enzyme was 6 X 10(-6)-10 X 10(-6) s-1, whereas the rate constant leading to inactive enzyme (EA') was 10 X 10(-6)-15 X 10(-6) s-1 at pH 7.0. Both constants became larger at higher pH. Inactive enzyme (EA') consisted of two major species, with pI 5.36 (EA'1) and 5.30 (EA'2). The former increased at the beginning of incubation but decreased after prolonged incubation. From consideration of these results and previous data [Arisawa & Then (1983) Biochem. J. 209, 609-615], a likely mechanism of inactivation of TEM-1 beta-lactamase by AMPA is discussed.     

Systematic mutagenesis of the active site omega loop of TEM-1 beta-lactamase.

Beta-Lactamase is a bacterial protein that provides resistance against beta-lactam antibiotics. TEM-1 beta-lactamase is the most prevalent plasmid-mediated beta-lactamase in gram-negative bacteria. Normally, this enzyme has high levels of hydrolytic activity for penicillins, but mutant beta-lactamases have evolved with activity toward a variety of beta-lactam antibiotics. It has been shown that active site substitutions are responsible for changes in the substrate specificity. Since mutant beta-lactamases pose a serious threat to antimicrobial therapy, the mechanisms by which mutations can alter the substrate specificity of TEM-1 beta-lactamase are of interest. Previously, screens of random libraries encompassing 31 of 55 active site amino acid positions enabled the identification of the residues responsible for maintaining the substrate specificity of TEM-1 beta-lactamase. In addition to substitutions found in clinical isolates, many other specificity-altering mutations were also identified. Interestingly, many nonspecific substitutions in the N-terminal half of the active site omega loop were found to increase ceftazidime hydrolytic activity and decrease ampicillin hydrolytic activity. To complete the active sight study, eight additional random libraries were constructed and screened for specificity-altering mutations. All additional substitutions found to alter the substrate specificity were located in the C-terminal half of the active site loop. These mutants, much like the N-terminal omega loop mutants, appear to be less stable than the wild-type enzyme. Further analysis of a 165-YYG-167 triple mutant, selected for high levels of ceftazidime hydrolytic activity, provides an example of the correlation which exists between enzyme instability and increased ceftazidime hydrolytic activity in the ceftazidime-selected omega loop mutants.     

Molecular structure and interrelationships of multiresistance beta-lactamase transposons

Transposons coding for beta-lactamases OXA-3, OXA-4, OXA-5, LCR-1, and CARB-3 have been isolated and compared functionally and structurally with transposons for TEM-1, OXA-1, PSE-1, PSE-2, and PSE-4 enzymes. Each beta-lactamase gene type occurred in a unit together with resistance to other antibiotics, particularly streptomycin and sulfonamide but also chloramphenicol, mercuric ion, or gentamicin, kanamycin, and tobramycin. Restriction mapping, gene cloning, and DNA hybridization were used to compare the transposons and to localize their functional components. Although the multiresistance beta-lactamase transposons varied in size from 8 to 25 kb, the similarity of some of their restriction maps suggested a common derivation. Six of 12 transposons contained DNA segments homologous to the tnpR gene of transposon Tn21 and could complement a tnpR- Tn21 derivative. Consequently, these six transposons appear to have evolved from a common progenitor by acquisition of DNA coding for various beta-lactamases and other resistance genes.     

Noncovalent interaction energies in covalent complexes: TEM-1 beta-lactamase and beta-lactams

The class A beta-lactamase TEM-1 is a key bacterial resistance enzyme against beta-lactam antibiotics, but little is known about the energetic bases for complementarity between TEM-1 and its inhibitors. Most inhibitors form a covalent adduct with the catalytic Ser70, making the measurement of equilibrium constants, and hence interaction energies, technically difficult. This study evaluates noncovalent interactions within covalent complexes by examining the differential stability of TEM-1 and its inhibitor adducts. The thermal denaturation of TEM-1 follows a two-state, reversible model with a melting temperature (T(m)) of 51.6C and a van't Hoff enthalpy of unfolding (DeltaH(VH)) of 146.2 kcal/mol at pH 7.0. The stability of the enzyme changes on forming an inhibitor adduct. As expected, some inhibitors stabilize TEM-1; transition-state analogues increase the T(m) by up to 3.7C (1.7 kcal/mol). Surprisingly, all beta-lactam covalent acyl--enzyme complexes tested destabilize TEM-1 significantly relative to the apo-enzyme. For instance, the clinically used inhibitor clavulanic acid and the beta-lactamase-resistant beta-lactams moxalactam and imipenem destabilize TEM-1 by over 2.6C (1.2 kcal/mol) in their covalent adducts. Based on the structure of the TEM-1/imipenem complex (Maveyraud et al., J Am Chem Soc 1998;120:9748--52), destabilization by moxalactam and imipenem is thought to be caused by a steric clash between the side-chain of Asn132 and the 6(7)-alpha group of these beta-lactams. To test this hypothesis, the mutant enzyme N132A was made. In contrast with wild-type, the covalent complexes between N132A and both imipenem and moxalactam stabilize the enzyme, consistent with the hypothesis. To investigate the structural bases of this dramatic change in stability, the structure of N132A/imipenem was determined by X-ray crystallography. In the complex with N132A, imipenem adopts a very different conformation from that observed in the wild-type complex, and the putative destabilizing interaction with residue 132 is relieved. Studies of several enzymes suggest that beta-lactams, and covalent inhibitors in general, can have either net favorable or net unfavorable noncovalent interaction energies within the covalent complex. In the case of TEM-1, such unfavorable interactions convert substrate analogues into very effective inhibitors.     

Overexpression and biosynthetic deuterium enrichment of TEM-1 beta-lactamase for structural characterization by magnetic resonance methods

An expression system has been developed that allows high levels of production of TEM-1 beta-lactamase with ease of biosynthetic incorporation of nuclear isotopes. The gene for mature TEM-1 beta-lactamase fused to the leader sequence of the ompA protein was subcloned into the pET-24a(+) vector by introduction of an NdeI restriction site at the first codon of the fused genes and transformed into Escherichia coli BL21 (DE3) cells. With protein induction at 25 degrees C supported by LB medium supplemented with osmolytes (300 mM sucrose and 2.5 mM betaine), the extracellular, mature form of wild-type TEM-1 beta-lactamase was recovered at a level of 140 mg/L. The production level of E166N, E240C, E104C, and M272C mutants depended on the mutation but was invariably higher than reported by others for expression systems of the wild-type enzyme. Comparison of different carbon sources on the efficiency of biosynthetic incorporation of covalent deuterium showed maximal (90%) incorporation with minimal medium containing 99% (2)H(2)O and sodium d(3)-acetate (99 atom% (2)H). The yield of deuterium-enriched wild-type enzyme was 80 mg/L with yields for mutants proportionally reduced. The high level of protein deuteration achieved with this system allowed detection of the hyperfine coupling between the paramagnetic nitroxyl group of a spin-labeled penicillin substrate and hydrogens on the penicillin moiety in a cryokinetically isolated acylenzyme reaction intermediate because of the decrease in overlapping resonances of active site residues. The overexpression system is readily adaptable for other target proteins and facilitates studies requiring large quantities of protein in isotopically enriched forms.     

Oligonucleotide probes for specific detection of Giardia lamblia cysts by fluorescent in situ hybridization

AIMS: Our study focused on the design of oligonucleotide probes and a suitable hybridization protocol that would allow rapid and specific identification of potentially viable cysts of the waterborne parasite Giardia lamblia. METHODS AND RESULTS: Comparative analysis of ribosomal RNA (rRNA) sequences of Giardia lamblia and a number of closely and more distantly related species identified six regions that appear to be specific for the G. lamblia 16S rRNA. Fluorescently labelled probes targeting these regions were produced and employed in fluorescent in situ hybridization (FISH) experiments. Two of the six probes tested successfully. CONCLUSION: Our study provides the first reported probes for specific FISH detection of G. lamblia. The method depends on sufficient amounts of intact rRNA in the target organism, which is unlikely to be present in nonviable cysts that have been exposed to the environment for a prolonged period. SIGNIFICANCE AND IMPACT OF THE STUDY: Currently, detection of G. lamblia cysts is largely based on immunofluorescence assays (IFA) targeting cyst wall surface antigens. These assays lack specificity and will detect species others than G. lamblia. Further, IFA will detect nonviable cysts and cyst wall fragments that do not pose a public health risk. In contrast, FISH probes allow specific detection and are likely to only detect viable, infectious cysts.     

Thermodynamic investigation of the role of contact residues of beta-lactamase-inhibitory protein for binding to TEM-1 beta-lactamase

We have determined the thermodynamics of binding for the interaction between TEM-1 beta-lactamase and a set of alanine substituted contact residue mutants ofbeta-lactamase-inhibitory protein (BLIP) using isothermal titration calorimetry. The binding enthalpies for these interactions are highly temperature dependent, with negative binding heat capacity changes ranging from -800 to -271 cal mol(-1) K(-1). The isoenthalpic temperatures (at which the binding enthalpy is zero) of these interactions range from 5 to 38 degrees C. The changes in isoenthalpic temperature were used as an indicator of the changes in enthalpy and entropy driving forces, which in turn are related to hydrophobic and hydrophilic interactions. A contact residue of BLIP is categorized as a canonical residue if its alanine substitution mutant exhibits a change of isoenthalpic temperature matching the change of hydrophobicity because of the mutation. A contact position exhibiting a change in isoenthalpic temperature that does not match the change in hydrophobicity is categorized as an anti-canonical residue. Our experimental results reveal that the majority of residues where alanine substitution results in a loss of affinity are canonical (7 of 10), and about half of the residues where alanine substitutions have a minor effect are canonical. The interactions between TEM-1beta-lactamase and BLIP canonical contact residues contribute directly to binding free energy, suggesting potential anchoring sites for binding partners. The anti-canonical behavior of certain residues may be the result of mutation-induced modifications such as structural rearrangements affecting contact residue configurations. Structural inspection of BLIP suggests that the Lys(74) side chain electrostatically holds BLIP loop 2 in position to bind to TEM-1 beta-lactamase, explaining a large loss of entropy-driven binding energy of the K74A mutant and the resulting anti-canonical behavior. The anti-canonical behavior of the W150A mutant may also be due to structural rearrangements. Finally, the affinity enhancing effect of the contact residue mutant Y50A may be due to energetic coupling interactions between Asp(49) and His(41).     

Identification of amino acid substitutions that alter the substrate specificity of TEM-1 beta-lactamase.

TEM-1 beta-lactamase is the most prevalent plasmid-mediated beta-lactamase in gram-negative bacteria. Recently, TEM beta-lactamase variants with amino acid substitutions in the active-site pocket of the enzyme have been identified in natural isolates with increased resistance to extended-spectrum cephalosporins. To identify other amino acid substitutions that alter the activity of TEM-1 towards extended-spectrum cephalosporins, we probed regions around the active-site pocket by random-replacement mutagenesis. This mutagenesis technique involves randomizing the DNA sequence of three to six codons in the blaTEM-1 gene to form a library containing all or nearly all of the possible substitutions for the region randomized. In total, 20 different residue positions that had been randomized were screened for amino acid substitutions that increased enzyme activity towards the extended-spectrum cephalosporin cefotaxime. Substitutions at positions 104, 168, and 238 in the TEM-1 beta-lactamase that resulted in increased enzyme activity towards extended-spectrum cephalosporins were found. In addition, small deletions in the loop containing residues 166 to 170 drastically altered the substrate specificity of the enzyme by increasing activity towards extended-spectrum cephalosporins while virtually eliminating activity towards ampicillin.     

Structural and evolutionary relationships of beta-lactamase transposons from Staphylococcus aureus

A comparison of the beta-lactamase elements detected on three classes of large plasmids together with the chromosomes of penicillin-resistant Staphylococcus aureus revealed substantial physical and genetic relatedness. In most cases, beta-lactamase production could be associated with the presence of a DNA segment of approximately 6.7 kb. Analysis showed that the plasmid-borne determinants constitute nearly identical transposons or transposon-like elements. An element indistinguishable from one of these, Tn4002, which is carried by the pSK1 family of plasmids in clinical isolates from Australian hospitals, was also identified on the staphylococcal chromosome and is implicated in an evolutionary cycle of transposition between chromosomal and extrachromosomal sites in Australian strains of multiresistant S. aureus.     

Calorimetric analysis of cephalosporins using an immobilized TEM-1 beta-lactamase on Ni2+ chelating sepharose fast flow

Two beta-lactamases, penicillinase type I from Bacillus cereus and TEM-1 beta-lactamase from Haemophilus ducreyi, were immobilized on a Chelating Sepharose Fast Flow column loaded with Ni2+ in an active form. Flow-injection analysis of beta-lactams was performed by using an enzyme column reactor fitted into the enzyme thermistor. With both enzymes it was possible to monitor both penicillins and cephalosporins. Moreover, Michaelis constants of the TEM-1 beta-lactamase were markedly increased upon immobilization for all substrates, especially carbenicillin, cephaloridine, and cefoperazone.     

Oligonucleotide probes specific for the genus Salmonella and for Salm. typhimurium

The Crystal Enteric/Nonfermenter (E/NF) identification kit (Becton Dickinson Microbiology Systems, USA) was evaluated using water-derived bacterial isolates and results compared to those obtained by the API 20E system (BioMérieux, UK). Both the E/NF and 20E systems correctly identified 93% of the Enterobacteriaceae reference cultures. Both systems agreed in the identification of 64·9% of environmental isolates. The E/NF system gave a positive identification to 88·0% of isolates and the 20E to 79·5% of isolates. The principal tests which gave differing reactions between the two systems were arginine dihydrolase, lysine decarboxylase, urease and citrate utilization.