Substrate specificity of the isoprenylated protein endoprotease.

Proteins containing a CAAX motif at their carboxyl termini are subject to isoprenylation at the cysteine residue. Proteolytic trimming of isoprenylated proteins is essential in the activation of these proteins. A microsomal endopeptidase activity has been identified which cleaves all-trans farnesylated cysteine containing tetrapeptides between the modified residue and the adjacent amino acid to liberate the modified cysteine residue and an intact tripeptide. Structure/activity studies are reported here on this endopeptidase activity which are consistent with the premise that this protease is identical to the one normally involved in the cellular isoprenylation pathway. The protease only processes peptides which possess an isoprenyl moiety. Within the isoprenyl series, the enzyme hydrolyzes all-trans-farnesyl-, all-trans-geranylgeranyl-, and geranyl-containing peptides. The protease also recognizes the AAX sequence, because the protease behaves either stereospecifically or stereoselectively with respect to the individual amino acids of the tripeptide. The enzyme only measurably hydrolyzes isoprenylated peptides possessing L-amino acids at C and A. On the other hand, there is a small but measurable hydrolysis of isoprenylated peptides containing a D-amino acid at X.     

Fluorescent isotope-coded affinity tag (FCAT). I: Design and synthesis

A novel class of isotope-coded affinity tag is proposed possessing a fluorescent feature, referred to as fluorescent isotope-coded affinity tag (FCAT), to provide a new tool for quantitative proteomics. The label is designed to bind cysteine containing proteins or peptides. The FCAT reagent comprises four functional elements: a specific chemical reactivity group toward sulfhydryl groups; a linker that can incorporate the stable isotopes; a hydroxymethylbenzoic residue (base labile group) to cleave off a large part of the label before MS analysis; and a fluorescent tag for absolute quantification. The fluorescent part of the tag is also planned to be utilized to isolate the FCAT-labeled peptides via antibody based pull-down method. In this paper, we report on the solid phase organic synthesis of the light isotope containing FCAT molecule. The new labeling reagent showed good reactivity with model cysteine containing peptides. The fluorophore group was also effectively cleaved off from the labeled products to accommodate easier MS based analysis.     

Effect of structural parameters of peptides on dimer formation and highly oxidized side products in the oxidation of thiols of linear analogues of human β‐defensin 3 by DMSO

The purpose of this study was to examine the effects of structural parameters of peptides on their oxidation by DMSO, including location of cysteine, effect of adjunct group participation, molecular hydrophobicity, steric hindrance or the accessibility of thiol group and peptide conformation, on oxidation rates, dimer formation and associated side products. We designed and synthesized two series of linear cysteine‐containing analogues of human β‐defensin 3 (the C1‐peptides with cysteine at the N‐terminus residue 1, the C29‐peptides with cysteine located at residue 29 in the centre of peptide), which were used for preparation of disulphide‐linked homodimers. HPLC–ESI–MS was used to monitor the oxidation process and to characterize the molecular weights of dimers and side products of high oxidation. The formations of dimers and side products were dependent on the position of cysteines. Hydrophobicity generally rendered the thiol groups less accessible and hence exposed them to slow oxidation to form dimers (or even fail to form dimers during the timescale of observation). Molecular dynamics simulations showed that the exposure of cysteines (and sulphurs) of the C1‐peptides was much larger than for the C29‐peptides. The larger hydrophobic side chains tended to enable clustering of the side chains that sequester cysteine, particularly in the C29‐peptides, which provided a molecular explanation for the observed trends in oxidation rates. Together with molecular modelling, we propose a reaction mechanism to elucidate the oxidation results of these peptides. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Location and the primary structure around the disulfide bonds in cholera toxin.

The sequence of the four tryptic peptides containing cysteine from cholera toxin has been determined. The cysteine residue in peptide A₂, forms a disulfide bridge with the cysteine in the A₁ chain located near the NH₂-terminus. The region around the latter cysteine residue is characterized by a high content of proline. One of the cysteine residues that form the intrachain disulfide bond in subunit B has been located at position 9 in this subunit.     

The subunit structure of rabbit skeletal-muscle phosphofructokinase and the amino acid sequence of the tryptic peptide containing the highly reactive thiol group.

1. The single highly reactive (class I) thiol group per 80000-mol.wt. subunit of skeletal-muscle phosphofructokinase was specifically carboxymethylated with iodo[2-14C]acetate, and after denaturation the remaining thiol groups were carboxymethylated with bromo[2-3H]acetate. After tryptic digestion and peptide 'mapping' it was found that the 14C radioactivity was in a spot that did not contain significant amounts of 3H radioactivity, so it is concluded that there is not a second, 'buried' cysteine residue within a sequence identical with that of the class-I cysteine peptide. 2. The total number of tryptic peptides as well as the number of those containing cysteine, histidine or tryptophan were inconsistent with the smallest polypeptide chain of phosphofructokinase (mol.wt. about 80000) being composed of two identical amino acid sequences. 3. The amino acid sequence of the tryptic peptide containing the class-I thiol group was shown to be Cys-Lys-Asp-Phe-Arg. This sequence is compared with part of the sequence containing the highly reactive thiol group of phosphorylase.     

Structural studies around cysteine and cystine residues in the “blue” oxidase fungal laccase B. Similarity in amino acid sequence with ceruloplasmin

Fungal laccase B from Polyporus versicolor is a “blue” oxidase containing four copper ions. It consists of a single polypeptide chain of about 545 amino acid residues. The enzyme has been hydrolyzed with pepsin, pronase and thermolysin, and peptides containing the single sulfhydryl group and one of the disulfide bridges have been isolated and characterized. The results show that there is some similarity in amino acid sequence on both sides of the disulfide bridge indicating an internal homology in the laccase molecule. The structure around the single cysteine residue (Leu-His-Cys-His-Ile-Asx-Phe) differs considerably from the cysteine region in low-molecular-weight “blue” proteins like plastocyanin and azurin which contain a single copper ion. However, it shows a pronounced similarity with the sequence around a cysteine residue in human ceruloplasmin suggesting that this structure has an important role in the multi-copper oxidases that is absent or different in the small “blue” proteins. We propose that this role is to constitute a bridge between different copper ions in the molecule and mediate the specific interaction between those which is a crucial feature in the catalytic action of the multi-copper oxidases.     

Amino terminal sequence analysis of human placenta aromatase

The amino acid composition and the amino-terminal amino acid sequence from position 1 to 21 of human placenta aromatase were determined. In addition, a cysteine containing peptide with a sequence homologous to those of peptides containing the cysteine residue which was suggested to provide the proximal thiolate ligand to the heme in other cytochrome p-450 isozymes, was identified. The results indicate that aromatase is a cytochrome p-450 protein, probably derived from a new cytochrome p-450 family.     

Amino acid sequences around the cysteine residue of calf lens α-crystallin

1. Calf lens alpha-crystallin was carboxymethylated with radioactive sodium iodoacetate to label the thiol group. 2. The protein was then digested with trypsin or alternatively fractionated in urea to obtain the acidic (A) chains, which were then digested with trypsin. Either procedure gave two radioactive peptides containing carboxymethylcysteine. 3. These two peptides were closely related: the longer form contained 28 amino acid residues, and the shorter lacked two residues at the N-terminal end of the longer form. 4. The amino acid sequence of the peptides have been determined. 5. No evidence for the presence of more than one cysteine residue/chain was found. 6. The question of the molecular weight of the chains is discussed.     

Side-chain anchoring strategy for solid-phase synthesis of peptide acids with C-terminal cysteine

Many naturally occurring peptide acids, e.g., somatostatins, conotoxins, and defensins, contain a cysteine residue at the C-terminus. Furthermore, installation of C-terminal cysteine onto epitopic peptide sequences as a preliminary to conjugating such structures to carrier proteins is a valuable tactic for antibody preparation. Anchoring of N(alpha)-Fmoc, S-protected C-terminal cysteine as an ester onto the support for solid-phase peptide synthesis is known to sometimes occur in low yields, has attendant risks of racemization, and may also result in conversion to a C-terminal 3-(1-piperidinyl)alanine residue as the peptide chain grows by Fmoc chemistry. These problems are documented for several current strategies, but can be circumvented by the title anchoring strategy, which features the following: (a). conversion of the eventual C-terminal cysteine residue, with Fmoc for N(alpha)-amino protection and tert-butyl for C(alpha)-carboxyl protection, to a corresponding S-xanthenyl ((2)XAL(4)) preformed handle derivative; and (b). attachment of the resultant preformed handle to amino-containing supports. This approach uses key intermediates that are similar to previously reported Fmoc-XAL handles, and builds on earlier experience with Xan and related protection for cysteine. Implementation of this strategy is documented here with syntheses of three small model peptides, as well as the tetradecapeptide somatostatin. Anchoring occurs without racemization, and the absence of 3-(1-piperidinyl)alanine formation is inferred by retention of chains on the support throughout the cycles of Fmoc chemistry. Fully deprotected peptides, including free sulfhydryl peptides, are released from the support in excellent yield by using cocktails containing a high concentration (i.e., 80-90%) of TFA plus appropriate thiols or silanes as scavengers. High-yield release of partially protected peptides is achieved by treatment with cocktails containing a low concentration (i.e., 1-5%) of TFA. In peptides with two cysteine residues, the corresponding intramolecular disulfide-bridged peptide is obtained by either (a). oxidation, in solution, of the dithiol product released by acid; (b). simultaneous acidolytic cleavage and disulfide formation, achieved by addition of the mild oxidant DMSO to the cleavage cocktail; or (c). concomitant cleavage/cooxidation (involving a downstream S-Xan protected cysteine), using reagents such as iodine or thallium tris(trifluoroacetate) in acetic acid.     

Polyionic fusion peptides function as specific dimerization motifs.

The de novo design of a molecular adapter for directed association and covalent linkage of two polypeptides is presented. Using peptides containing charged amino acid residues and an additional cysteine residue (AlaCysLys(8) and AlaCysGlu(8)) we demonstrate that the electrostatic interaction promotes the association of two synthetic peptides and, subsequently, disulfide bond formation. The reaction depends on both the redox potential and on the ionic strength of the buffer. Varying the redox potential, the interaction of the peptides was quantified by a Delta G(0') of 6.6 +/- 0.2 kcal/mol. Heterodimerization of the peptides is highly specific, a competition of association by other cysteine containing compounds could not be observed. Two proteins comprising cysteine-containing polyionic fusion peptides, a modified Fab fragment and an alpha-glucosidase fusion, could be specifically conjugated by directed association and subsequent disulfide bond formation. Both proteins retain their functional characteristics within the bifunctional conjugate: enzymatic activity of the alpha-glucosidase and antigen-binding capacity of the Fab fragment are equivalent to the non-conjugated components.     

Studying the S-nitrosylation of model peptides and eNOS protein by mass spectrometry.

Oxidative addition of a nitric oxide (NO) molecule to the thiol group of cysteine residues is a physiologically important post-translational modification that has been implicated in several metabolic and pathophysiological events. Our previous studies have indicated that S-nitrosylation can result in the disruption of the endothelial NO synthase (eNOS) dimer. It has been suggested that for S-nitrosylation to occur, the cysteine residue must be flanked by hydrophilic residues either in the primary structure or in the spatial proximity through appropriate conformation. However, this hypothesis has not been confirmed. Thus, the objective of this study was to determine if the nature of the amino acid residues that flank the cysteine in the primary structure has a significant effect on the rate and/or specificity of S-nitrosylation. To accomplish this, we utilized several model peptides based on the eNOS protein sequence. Some of these peptides contained point mutations to allow for different combinations of amino acid properties (acidic, basic, and hydrophobic) around the cysteine residue. To ensure that the results obtained were not dependent on the nitrosylation procedure, several common S-nitrosylation techniques were used and S-nitrosylation followed by mass spectrometric detection. Our data indicated that all peptides independent of the amino acids surrounding the cysteine residue underwent rapid S-nitrosylation. Thus, there does not appear to be a profound effect of the primary sequence of adjacent amino acid residues on the rate of cysteine S-nitrosylation at least at the peptide levels. Finally, our studies using recombinant human eNOS confirm that Cys98 undergoes S-nitrosylation. Thus, our data validate the importance of Cys98 in regulating eNOS dimerization and activity, and the utility of mass spectroscopy to identify cysteine residues susceptible to S-nitrosoylation.     

Localization of the intrachain disulfide bonds of the envelope glycoprotein 71 from Friend murine leukemia virus.

Envelope glycoprotein 71 from Friend murine leukemia virus was purified to homogeneity by reversed-phase HPLC. It could be shown that all 20 cysteine residues of the molecule are linked by disulfide bonds. After complete tryptic digestion, peptides containing cystine were identified by comparison of the reversed-phase HPLC profile of the digest with that of a reduced aliquot which had been subjected to affinity chromatography on thiol-Sepharose. The locations of the 10 disulfide bonds were determined by isolation, further digestion and analysis of peptides containing cystine. The first cysteine residue of the sequence (Cys46) was shown to be coupled to the sixth (Cys98), leading to a large loop containing four additional cysteine residues. Computer model building and energy calculations led to the assignment of Cys72 to Cys87 and Cys73 to Cys83. The following four cysteine residues of the sequence also constitute a structural unit, with Cys121 bonded to Cys141 and Cys133 to Cys146, and the last two cysteine residues in the amino-terminal domain of glycoprotein 71 form a small loop (Cys178 to Cys184). The first two cysteine residues of the carboxy-terminal domain produce a very small hydrophobic loop (Cys312-Cys315). Cys361 is bound to Cys373, Cys342 to Cys396 and Cys403 to Cys416. A model for the folding pattern of the viral glycoprotein is proposed.     

Novel thioester reagents afford efficient and specific S-acylation of unprotected peptides under mild conditions in aqueous solution.

S-acylated peptides have many potential uses for elucidating the biophysical, structural and other properties of the numerous S-acylated proteins of mammalian cells. However, with the currently available reagents, preparation of specifically S-acylated derivatives of peptides is generally laborious or simply unfeasible. We here show that novel, easily preparable aryl and alkyl thioester derivatives of palmitic acid can mediate S-acylation of peptides corresponding to physiologically S-acylated sequences from the proteins p56(lck) and H-ras and the Po glycoprotein of peripheral myelin, with high selectivity for cysteine over other amino acid functional groups (including hydroxyl and both alpha- and epsilon-amino residues), and with much greater efficiency than is obtained using acyl-coenzyme A derivatives. Efficient and selective S-acylation can be accomplished under very mild conditions in aqueous systems containing lipid vesicles or detergent micelles, or in homogenous aqueous/acetonitrile mixtures. Using these novel thioesterifying reagents, we confirm previous suggestions that the N-terminal cysteine residue of Hedgehog proteins can exhibit rapid, uncatalyzed S-to-N acyl transfer following S-acylation to produce the N-palmitoylated amino terminus found in the mature protein. By contrast, we demonstrate that spontaneous S-to-N acyl transfer from the cysteine to the terminal glycine residue in the amino-terminal peptide of G(alphas) is far less rapid and is likely too slow to explain the physiological N-palmitoylation of the amino terminus of this protein.     

Specific labeling of the essential cysteine residue of L-methionine gamma-lyase with a cofactor analogue, N-(bromoacetyl)pyridoxamine phosphate

L-Methionine gamma-lyase from Pseudomonas putida is composed of four identical polypeptide chains and contains four cysteinyl residues per subunit. We have found one of them catalytically essential by its specific cyanylation with 2-nitro-5-thiocyanobenzoic acid. We have shown its essentiality also with N-(bromoacetyl)pyridoxamine 5'-phosphate (BAPMP), which is a cofactor analogue and also an affinity-labeling agent. The kinetic data show that the apoenzyme forms a binary complex with BAPMP prior to covalent binding. The stoichiometry of inactivation was 1 mol of BAPMP per subunit. We have shown that the cysteine residue modified with BAPMP is identical with that labeled specifically with [14C]iodoacetic acid. The amino acid sequences of the peptides containing the essential cysteine residue and the lysine residue to which pyridoxal 5'-phosphate is bound were determined by automated Edman degradation.     

Direct photoaffinity labeling of cysteine 211 or a nearby amino acid residue of beta-tubulin by guanosine 5'-diphosphate bound in the exchangeable site

Tubulin with [8-14C]GDP bound in the exchangeable site was exposed to ultraviolet light, and radiolabel was cross-linked to two peptide regions of the beta-subunit. Following enrichment for peptides cross-linked to guanosine by boronate chromatography, we confirmed that the cysteine 12 residue was the major site of cross-linking. However, significant radiolabel was also incorporated into a peptide containing amino acid residues 206 through 224. Although every amino acid in this peptide except cysteine 211 was identified by sequential Edman degradation, implying that this was the amino acid residue cross-linked to guanosine, radiolabel at C-8 was usually lost during peptide processing (probably during chromatography at pH 10). Consequently, the radiolabeled amino acid could not be unambiguously identified.     

Initial steps in assembly of microfibrils. Formation of disulfide-cross-linked multimers containing fibrillin-1

Fibrillins are the major constituents of extracellular microfibrils. How fibrillin molecules assemble into microfibrils is not known. Sequential extractions and pulse-chase labeling of organ cultures of embryonic chick aortae revealed rapid formation of disulfide-cross-linked aggregates containing fibrillin-1. These results demonstrated that intermolecular disulfide bond formation is an initial step in the assembly process. To identify free cysteine residues available for intermolecular cross-linking, small recombinant peptides of fibrillin-1 harboring candidate cysteine residues were analyzed. Results revealed that the first four cysteine residues in the unique N terminus form intramolecular disulfide bonds. One cysteine residue (Cys(204)) in the first hybrid domain of fibrillin-1 was found to occur as a free thiol and is therefore a good candidate for intermolecular disulfide bonding in initial steps of the assembly process. Furthermore, evidence indicated that the comparable cysteine residue in fibrillin-2 (Cys(233)) also occurs as a free thiol. These free cysteine residues in fibrillins are readily available for intermolecular disulfide bond formation, as determined by reaction with Ellman's reagent. In addition to these major results, the cleavage site of the fibrillin-1 signal peptide and the N-terminal sequence of monomeric authentic fibrillin-1 from conditioned fibroblast medium were determined.     

Solid-phase synthesis and applications of N-(S-acetylmercaptoacetyl) peptides

The reagent pentafluorophenyl S-acetylmercaptoacetate was used to modify the N-terminus of resin-bound side-chain-protected peptides. The modification was carried out in an automated cycle in the final stage of fluorenylmethoxycarbonyl (Fmoc)/polyamide-mediated solid-phase synthesis. Side-chain deprotection and cleavage from the resin with aqueous trifluoroacetic acid gave the N-(S-acetylmercaptoacetyl) peptides. The S-acetylmercaptoacetyl peptides were transformed into reactive thiol-containing peptides by incubation with hydroxylamine at neutral pH. The S-deacetylation was performed in the presence of a sulfhydryl-reactive compound (or intramolecular group) to enable immediate capture of the sensitive thiol. Three applications were investigated. An S-acetylmercaptoacetyl peptide, containing a sequence of a meningococcal membrane protein, was incubated with hydroxylamine in the presence of 5-(iodoacetamido)fluorescein to give the corresponding fluorescein-labeled peptide in 62% yield. The same peptide was also S-deacetylated in the presence of bromoacetylated poly-L-lysine to afford a peptide/polylysine conjugate. Finally, a peptide corresponding to a sequence of herpes simplex virus glycoprotein D was prepared. This peptide, containing an N-terminal-S-acetylmercaptoacetyl group and an additional C-terminal S-(3-nitro-2-pyridinesulfenyl)cysteine residue, was converted into a cyclic disulfide peptide (20%).     

α-Crystallin. Fractionation of subunits and sequence studies on an isolated polypeptide

alpha-Crystallin was carboxymethylated with radioactive iodoacetic acid in the presence of 7.6m-urea and then separated into six major fractions by chromatography on DEAE-cellulose in 7m-urea. Based on the amino acid compositions, specific radioactivities and sodium dodecyl sulphate-gel electrophoresis of the fractions, it was concluded that alpha-crystallin contains at least four different subunits: DU1A and DU1B, containing no cysteine; a third component represented by DU2B and DU3 containing one cysteine one cysteine residue per subunit; and DU4, which probably contains two residues of cysteine per subunit. Subunit DU1A was shown to be of sufficient purity for sequence studies. Cyanogen bromide cleavage yielded two peptides, CB-1 and CB-2, in approximately equal amounts as expected. The sum of the molecular weights and amino acid compositions of the peptides were both in excellent agreement with the results obtained for subunit DU1A. The amino acid sequence of the first sixteen residues of peptide CB-1 is: Ser-Leu-Thr-Lys-Asp-Phe-Asp-Glu-Val-Asn-Ile-Asp-Val-Ser-His-Phe-. The sequence of the first seventeen residues of peptide CB-2 is: Asp-Ile-Ala-Ile-Ser-His-Pro-Trp-Ile-Arg-Pro-Ser-Phe-Phe-Glu-Phe-His-. The N-terminal sequence of subunit DU1A was shown to be N-acetylmethionine followed by peptide CB-2.     

Thiol peptides from the aspartate transaminase of chicken heart cytosol

Aspartate transaminase from chicken heart cytosol was immobilized covalently on activated thiol-Sepharose and digested with trypsin. After washing, the thiol-containing peptides were eluted with 2-mercaptoethanol and further purified by gel-filtration and paper chromatography. Three pure cysteinyl peptides were isolated. One of them may be represented as Ile-(Asp, Met, Cys, Gly, Leu, Thr2)-Lys; this peptide is identical to the fragment comprizing residues 387--395 in the peptide chain of aspartate transaminase from pig heart cytosol. It thus contains a cysteine residue homologous to Cys-390 of the pig heart enzyme. The second cysteinyl peptide had the following composition and partial sequence: Tyr-Phe-Val-Ser-Glu-Gly-Phe-Glu-Leu-Phe (Cys, Ala, Glu, Ser2, Phe)Lys, which corresponds to the sequence 242--258 of the pig enzyme and thus contains a cysteine residue homologous to Cys-252. The third cysteinyl peptide was similar to the tryptic peptide of the pig enzyme containing Cys-191.