Synthesis and structural characterization of bioactive peptide conjugates using thioether linkage approaches.

Applications of cysteine-insertion and thioether linkage approaches to the preparation of a number of bioactive peptide conjugates are reported. Peptides containing epitopes from (i) herpes simplex virus type 1 glycoprotein D, (ii) a specific N-terminal beta-amyloid epitope recognized by therapeutically active antibodies, and (iii) a GnRH-III peptide from sea lamprey with antitumour activity, were elongated with Cys residues and attached to a chloroacetylated tetratuftsin derivative carrier via a thioether linkage either directly, or by insertion of a spacer. The structures and molecular homogeneity of all the peptide conjugates were ascertained by HPLC, MALDI and electrospray mass spectrometry. The use of a spacer such as an oligoglycine or GFLG-tetrapeptide gave an increased yield in the conjugation reaction and enhanced reaction rates. In the formation of cysteinyl-thioether linkages, it was found that the position of flanking Cys residues markedly influenced the conjugation reaction and the formation of intermolecular epitope disulfide-dimers. C-terminal Cys residues gave thioether conjugates with significantly diminished epitope-dimerization, while Cys at the N-terminal caused rapid disulfide-dimerization, thereby preventing efficient conjugation.     

The effect of cyclization on the enzymatic degradation of herpes simplex virus glycoprotein D derived epitope peptide.

One linear and three cyclic peptides corresponding to the 278-287 ((278)LLEDPVGTVA(287)) sequence of glycoprotein D (gD-1) of herpes simplex virus were synthesized for the analysis of the effect of cyclization on protection against enzymatic degradation. In this design, the turn-forming motif ((281)DPVG(284)) was positioned in the central part of the peptide and elongated by three amino acids at both termini. Cyclopeptide formation was achieved by the introduction of a peptide bond, a disulfide bridge or a thioether link. The stability of these peptides was compared in human serum and also in rat lysosomal preparations. The data obtained in 10% and 50% human serum show that all three types of cyclization enhanced the stability, but at different levels. Complete stability was only achieved by the introduction of a thioether link, while the presence of a disulfide or peptide bond resulted in improved, but partial resistance against hydrolytic decomposition. In lysosomal preparations the presence of cyclic primary structure provided full protection against enzymatic hydrolysis. Taken together, these findings indicate that by appropriate structural modification it is feasible to construct a synthetic antigen with high stability against enzymatic degradation in complex biological fluids. Further studies are in progress to identify enzymes responsible for degradation in diluted human sera as well as in the lysosomal preparations and to gain more detailed information on the mechanism of action.     

Influenza virus H5N1 hemagglutinin (HA) T‐cell epitope conjugates: design,synthesis and immunogenicity

The influenza virus, major surface glycoprotein hemagglutinin (HA) is one of the principal targets for the development of protective immunity. Aiming at contributing to the development of a vaccine that remains the first choice for prophylactic intervention, a reconstituted model of HA, mimicking its antigenic properties was designed, synthesized and tested in mice for the induction of protective immunity. Four helper T lymphocyte [HTL (T₁, T₃, T₇ and T₈)] and four cytotoxic lymphocyte [CTL (T₂, T₄, T₅ and T₆)] epitopes were coupled in two copies each to an artificial carrier, SOC₄, which was formed by the repeating tripeptide Lys‐Aib‐Gly. The helical conformation of the SOC₄‐conjugates preserves the initial topology of the attached epitopes, which is critical for their immunogenic properties. Survival of immunized animals, ranged from 30 to 50%, points out the induction of protective immunity by using the SOC₄‐conjugates. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Mass spectrometric and chemical stability of the Asp-Pro bond in herpes simplex virus epitope peptides compared with X-Pro bonds of related sequences.

The mass spectrometric analysis of the immunodominant epitope region (273-284) of herpes simplex virus type 1 (HSV-1) glycoprotein D (gD) showed a favoured fission at the Asp-Pro peptide bond. The fast atom bombardment collision induced dissociation (FAB-CID) study of closely related X-Pro peptides documented that neither the length nor the amino acid composition of the peptide has a significant influence on this preferential cleavage. At the same time the DP bond proved to be sensitive to acidic conditions in the course of peptide synthesis. These observations prompted us to compare the chemical and mass spectrometric stability of a new set of nonapeptides related to the 273-284 epitope region of gD, i.e. SALLEDPVG and SALLEXPVG peptides, where X = A, K, I, S, F, E or D, respectively. The chemical stability of these peptides during acidic hydrolysis was investigated by electrospray ionization mass spectrometry (ESI-MS) and the products were identified by ESI-MS and on-line high performance liquid chromatography-mass spectrometry (HPLC-MS). The mass spectrometric fragmentation and bond stability of the untreated peptide samples were also studied using ESI-MS and liquid secondary ion mass spectrometry (LSIMS). Both the chemical hydrolysis and the mass spectrometric fragmentation showed that the Asp-Pro bond could easily be cleaved, while the KP bond proved to be stable under both circumstances. On the other hand, the XP bond (X = A, I, S, F or E) fragmented easily under the mass spectrometric conditions, but was not sensitive to the acidolysis.     

Synthesis and antigenic properties of reduced peptide bond analogues of an immunodominant epitope of the melanoma MART-1 protein.

Backbone modifications have been introduced into the melanoma derived peptide MART-1(27-35) to increase its binding to class I major histocompatibility complex HLA-A2 molecule, and ultimately to enhance its immunogenicity. Each analogue was obtained by replacing one peptide bond at a time in the natural epitope by the aminomethylene (CH2-NH) surrogate. All analogues displayed an increased resistance to proteolysis. Interestingly, the comparative results showed that five analogues bound more efficiently to HLA-A2 than the parent peptide. On the other hand, two pseudopeptide/HLA-A2 complexes were recognized by one melanoma-specific T cell clone. Close examination of the impact of such modifications at the molecular level provides useful supports for the rational design of stable compounds with applications in anti-tumour specific immunotherapy and in vaccine development.     

Haptenization of ovalbumin with the skin sensitizer methyl octanesulfonate: characterization of the methylated OVA323-339 T-cell epitope at His331.

Our interest is focused on the induction of allergic contact dermatitis (ACD) by the strong skin sensitizer, methyl octanesulfonate, which is a potent methyl transfer agent, especially to histidine and methionine residues. We are particularly interested to study the effect of methylation on the presentation and recognition of the ovalbumin (OVA) T-cell epitope, OVA323-339, by the T-cell receptor (TCR). Here we report the synthesis of the modified monomer N-alpha-Fmoc-N-tau-methyl-L-histidine and its incorporation by solid phase synthesis into the three possible methylated analogues of OVA323-339, that were needed as references for the subsequent studies. Native OVA was haptenized by methyl octanesulfonate. Using classical protein chemistry techniques (trypsin digestion, gel permeation, HPLC, MS and Edman sequencing) we were able to show that OVA323-339 was selectively methylated at His331. Circular dichroism (CD) studies showed that the methylation has no influence on the secondary structure of the peptide.     

Further characterization of the rabies virus glycoproteins produced by virus-infected and G cDNA-transfected cells using a monoclonal antibody, #1-30-44, which recognizes an acid-sensitive epitope

Expression of rabies virus glycoprotein (G) by G cDNA-transfected mammalian cells resulted in the production of only a fusion-negative form. Low pH-dependent fusion activity, however, was seen when the expression was done under control of the T7 promoter with the help of recombinant vaccinia virus (RVV-T7) that provided T7 RNA polymerase. Fusion-inactive G proteins were transported to the cell surface as being detected by a conformational epitope-specific monoclonal antibody (mAb; #1-46-12). The fusion-inactive G proteins were recognized by most of our 13 conformation-specific mAbs, except for one mAb, #1-30-44, that recognized the low pH-sensitive conformational epitope. When the G gene expression was done with the help of RVV-T7, although most G proteins remained in the epitope-negative form, a small fraction of G gene products were 1-30-44 epitope-positive, and cell fusion activity could be seen when cells were exposed to low pH conditions. From these results, we conclude that acquisition of low pH-dependent fusion activity is closely related to structural maturation of the G protein to form the low pH-sensitive 1-30-44 epitope. Such maturation seems to be dependent on certain rabies virus-induced cellular conditions or functions, which might also be provided in part by the vaccinia virus infection. We further assume that expression of G cDNA alone mostly results in the production of mis-folded and/or differently folded forms of G protein, and only a small fraction is correctly folded even under RVV-T7-mediated expression conditions.     

Influenza A virus protein PB1-F2: synthesis and characterization of the biologically active full length protein and related peptides.

Recently the discovery of a novel 87 amino acid influenza A virus (IAV) protein, named PB1-F2, has been reported that originates from an alternative reading frame in the PB1 polymerase gene and is encoded in most of the known human IAV isolates. Using optimized protocols, full length biologically active sPB1-F2 and a number of fragments have been synthesized by following either the standard elongation SPPS method or by native chemical ligation of unprotected N- and C-terminal peptide fragments at the histidine and cysteine residues located in position 41 and 42 of the native sequence, respectively. The ligation procedure afforded the most efficient synthesis of sPB1-F2 and facilitated the generation of various mutants of sPB1-F2 from pre-synthesized peptide fragments. During the synthesis of sPB1-F2, the formation of succinimide and subsequent conversion to the piperidine derivative at the aspartic acid residue in position 23 was observed. This reaction was forestalled by applying specific modifications to the SPPS protocol. The chain-elongation SPPS protocol is optimal for producing small peptides of sPB1-F2, their derivatives and precursors for a subsequent ligation protocol, while the full length protein, mutants and labelled derivatives are more conveniently and efficiently synthesized by SPPS protocols that include native chemical ligation. The molecular identity of sPB1-F2 was confirmed by peptide mapping, mass spectrometry, N-terminal sequencing, (1)H NMR spectroscopy and Western blot analysis. The latter analysis afforded direct evidence of the inherent tendency of sPB1-F2 to undergo oligomerization, a phenomenon observed both for full length sPB1-F2 and fragments thereof, as well as for its full length viral counterpart. Our synthesis protocols open the field for multiple biological and structural studies on sPB1-F2 that, similar to the molecule expressed in an IAV context, induces apoptosis and interacts with membranes in vitro and in vivo, as shown in previous studies.     

The 'O-acyl isopeptide method' for the synthesis of difficult sequence-containing peptides: application to the synthesis of Alzheimer's disease-related amyloid beta peptide (Abeta) 1-42.

An efficient 'O-acyl isopeptide method' for the synthesis of difficult sequence-containing peptides was applied successfully to the synthesis of amyloid beta peptide (Abeta) 1-42 via a water-soluble O-acyl isopeptide of Abeta1-42, i.e. '26-O-acyl isoAbeta1-42' (6). This paper describes the detailed synthesis of Abeta1-42 focusing on the importance of resin selection and the analysis of side reactions in the O-acyl isopeptide method. Protected '26-O-acyl isoAbeta1-42' peptide resin was synthesized using 2-chlorotrityl chloride resin with minimum side reactions in comparison with other resins and deprotected crude 26-O-acyl isoAbeta1-42 was easily purified by HPLC due to its relatively good purity and narrow elution with reasonable water solubility. This suggests that only one insertion of the isopeptide structure into the sequence of the 42-residue peptide can suppress the unfavourable nature of its difficult sequence. The migration of O-acyl isopeptide to intact Abeta1-42 under physiological conditions (pH 7.4) via O--N intramolecular acyl migration reaction was very rapid and no other by-product formation was observed while 6 was stable under storage conditions. These results concluded that our strategy not only overcomes the solubility problem in the synthesis of Abeta1-42 and can provide intact Abeta1-42 efficiently, but is also applicable in the synthesis of large difficult sequence-containing peptides at least up to 50 amino acids. This synthesis method would provide a biological evaluation system in Alzheimer's disease research, in which 26-O-acyl isoAbeta1-42 can be stored in a solubilized form before use and then rapidly produces intact Abeta1-42 in situ during biological experiments.     

Towards meeting the paracelsus challenge: The design,synthesis, and characterization of paracelsin-43, an α-helical protein with over 50% sequence identity to an all-β protein

In response to the Paracelsus Challenge (Rose and Creamer, Proteins, 19:1–3, 1994), we present here the design, synthesis, and characterization of a helical protein, whose sequence is 50% identical to that of an all-β protein. The new sequence was derived by applying an inverse protein folding approach, in which the sequence was optimized to “fit” the new helical structure, but constrained to retain 50% of the original amino acid residues. The program utilizes a genetic algorithm to optimize the sequence, together with empirical potentials of mean force to evaluate the sequence-structure compatibility. Although the designed sequence has little ordered (secondary) structure in water, circular dichroism and nuclear magnetic resonance data show clear evidence for significant helical content in water/ethylene glycol and in water/methanol mixtures at low temperatures, as well as melting behavior indicative of cooperative folding. We believe that this represents a significant step toward meeting the Paracelsus Challenge.