Dielectric properties of two diastereoisomers of the arabinose and their equimolar mixture

Dielectric relaxation measurements were performed on two enantiomers, d- and l-arabinose and their equimolar mixture, and compared to dielectric data obtained for d-ribose. d-Arabinose differs from d-ribose by having the opposite configuration at C2. This study reveals that both d- and l- of arabinose exhibit α-relaxation peaks with the same shape for the same α-relaxation time τ_α, and the same steepness index for the T_g-scale T-dependence of τ_α. However, the two isomers have slightly different glass transition temperatures T_g’s, and their secondary γ-relaxation times also differ slightly from the previously observed γ-relaxation in d-ribose at the same temperature. However, when samples of both investigated monosaccharides are annealed at higher temperatures, their glass transition temperatures become nearly identical. This is an effect of the mutarotation process, which leads to the formation of pairs of the enantiomers and accordingly they should have the same physical properties. The width of the α-relaxation of d- and l-arabinose is broader than that of d-ribose, as reflected by the smaller stretch exponent in the Kohlrausch-Williams-Watts function used to fit the data of the former (β_KWW = 0.46 ± 0.01) than the latter (β_KWW = 0.55 ± 0.01). The width of the α-relaxation of racemic mixture of the d- and l-arabinose is slightly broader than that of the pure isomers. While the dielectric loss data of d-ribose in the glassy state at ambient and elevated pressures show an inflexion indicating the presence of the JG β-relaxation, the data of d- and l-arabinose show no such feature for identification of the supposedly universal JG β-relaxation. Nevertheless, on comparing the loss spectra of d-arabinose with that of d-ribose, the presence of the JG β-relaxation in d-arabinose has been rationalized.     

Production of L-xylose from L-xylulose using Escherichia coli L-fucose isomerase

l-Xylulose was used as a raw material for the production of l-xylose with a recombinantly produced Escherichia colil-fucose isomerase as the catalyst. The enzyme had a very alkaline pH optimum (over 10.5) and displayed Michaelis-Menten kinetics for l-xylulose with a K_m of 41 mM and a V_max of 0.23 μmol/(mg min). The half-lives determined for the enzyme at 35 °C and at 45 °C were 6 h 50 min and 1 h 31 min, respectively. The reaction equilibrium between l-xylulose and l-xylose was 15:85 at 35 °C and thus favored the formation of l-xylose. Contrary to the l-rhamnose isomerase catalyzed reaction described previously [14]l-lyxose was not detected in the reaction mixture with l-fucose isomerase. Although xylitol acted as an inhibitor of the reaction, even at a high ratio of xylitol to l-xylulose the inhibition did not reach 50%.     

Mechanism of the inhibitory effect of zwitterionic drugs (levofloxacin and grepafloxacin) on carnitine transporter (OCTN2) in Caco-2 cells

l-Carnitine plays an important role in lipid metabolism by facilitating the transport of long-chain fatty acids across the mitochondrial inner membrane followed by fatty acid beta-oxidation. It is known that l-carnitine exists as a zwitterion and that member of the OCTN family play an important role in its transport. The aims of this study were to characterize l-carnitine transport in the intestine by using Caco-2 cells and to elucidate the effects of levofloxacin (LVFX) and grepafloxacin (GPFX), which are zwitterionic drugs, on l-carnitine uptake. Kinetic analysis showed that the half-saturation Na⁺ concentration, Hill coefficient and K_m value of l-carnitine uptake in Caco-2 cells were 10.3 ± 4.5 mM, 1.09 and 8.0 ± 1.0 μM, respectively, suggesting that OCTN2 mainly transports l-carnitine. LVFX and GPFX have two pK_a values and the existence ratio of their zwitterionic forms is higher under a neutral condition than under an acidic condition. Experiments on the inhibitory effect of LVFX and GPFX on l-carnitine uptake showed that LVFX and GPFX inhibited l-carnitine uptake more strongly at pH 7.4 than at pH 5.5. It was concluded that the zwitterionic form of drugs plays an important role in inhibition of OCTN2 function.     

Mechanism of the dehydration of D-fructose to 5-hydroxymethylfurfural in dimethyl sulfoxide at 150 degrees C: an NMR study

The anomeric composition of d-fructose in dimethyl sulfoxide changes when the solution is heated from room temperature to 150 °C, with a small increase in the α-furanose form at the expense of the β-pyranose tautomer. Additionally, a small amount of α-pyranose form was also observed at 150 °C. A mechanism is proposed for the dehydration of d-fructose to 5-hydroxymethylfurfural in DMSO at 150 °C, where the solvent acts as the catalyst. A key intermediate in the reaction was identified as (4R,5R)-4-hydroxy-5-hydroxymethyl-4,5-dihydrofuran-2-carbaldehyde by using ¹H and ¹³C NMR spectra of the sample during the reaction.     

High-performance liquid chromatography determination of ketone bodies in human plasma by precolumn derivatization with p-nitrobenzene diazonium fluoroborate

We developed and validated a sensitive and convenient high-performance liquid chromatography (HPLC) method for the specific determination of ketone bodies (acetoacetate and d-3-hydroxybutyrate) in human plasma. p-Nitrobenzene diazonium fluoroborate (diazo reagent) was used as a precolumn derivatization agent, and 3-(2-hydroxyphenyl) propionic acid was used as an internal standard. After the reaction, excess diazo reagent and plasma proteins were removed by passing through a solid-phase cartridge (C₁₈). The derivatives retained on the cartridge were eluted with methanol, introduced into the HPLC system, and then detected with UV at 380 nm. A calibration curve for acetoacetate standard solution with a 20-μl injection volume showed good linearity in the range of 1 to 400 μM with a 0.9997 correlation coefficient. For the determination of d-3-hydroxybutyrate, it was converted to acetoacetate before reaction with the diazo reagent by an enzymatic coupling method using d-3-hydroxybutyrate dehydrogenase and lactate dehydrogenase. A calibration curve for d-3-hydroxybutyrate standard solution also showed good linearity in the range of 1.5 to 2000 μM with a 0.9988 correlation coefficient. Analytical recoveries of acetoacetate and d-3-hydroxybutyrate in human plasma were satisfactory. The method was successfully applied to samples from diabetic patients, and results were consistent with those obtained using the thio-NAD enzymatic cycling method used in clinical laboratories.     

Isolation and characterization of a novel myoactive tetradecapeptide-related peptide isolated from the brain of the squid, Todarodes pacificus

A new bioactive tetradecapeptide, GFKDNVSNRIAHGFamide, was isolated from the brain of the squid, Todarodes pacificus. Using isolated T. pacificus esophagus as a bioassay, the peptide was shown to induce potent contraction of smooth muscle. The threshold concentration for contraction was 5 × 10⁻¹⁰ M to 1 × 10⁻⁹ M. The peptide was homologous to other molluskan (class Gastropoda) and annelid myoactive tetradecapeptides and to some extent, to arthropodan tridecapeptides. A full-length cDNA encoding the biosynthetic precursor of the active peptide was cloned, revealing that the peptide is probably secreted following processing of a prepropeptide containing a signal peptide and prosequences. This is the first myoactive tetradecapeptide (MATP) to be isolated from any mollusk of the class Cephalopoda and we have named it Todarodes tetradecapeptide (TTP).     

High-performance liquid chromatographic method to measure protein L-isoaspartyl/D-aspartyl o-methyltransferase activity in cell lysates

Protein l-isoaspartyl/d-aspartyl o-methyltransferase (PIMT) is a widely expressed protein repair enzyme that restores isomerized aspartyl residues to their normal configuration. Current methods for measuring PIMT activity have limited sensitivity or require radioactivity. We have developed a highly sensitive new assay method to measure PIMT activity in cell lysates. As a substrate, we used a fluorescently labeled delta sleep-inducing peptide (DSIP) that contains an isoaspartyl residue: 7-nitro-2,1,3-benzoxadiazole (NBD)-DSIP(isoAsp). The PIMT-catalyzed transfer of a methyl group onto this substrate can be detected with a simple high-performance liquid chromatography (HPLC) procedure. After the enzyme reaction, the methylated form of the peptide is stable and can be reproducibly separated from the unmethylated form in an acidic solvent and fluorometrically detected by HPLC. The limit of detection was estimated to be approximately 1 pmol of NBD-DSIP(isoAsp) (signal/noise ratio [S/N] = 3), and the quantitation limit of the activity was approximately 18 μg of total cell lysate from HEK293 cells (10.7 pmol/min/mg protein). This assay method is sensitive enough to detect PIMT activity in biological samples without the use of radioisotopes, offering significant advantages over previously reported methods.     

Determination of plasma and serum l-lysine using l-lysine ε-oxidase from Marinomonas mediterranea NBRC 103028

This article describes a successful application of l-lysine ε-oxidase (EC 1.4.3.20) for l-lysine determination. l-Lysine ε-oxidase was isolated from culture supernatant of Marinomonas mediterranea NBRC 103028^T and was used for l-lysine determination. Comparison of the characteristics of l-lysine ε-oxidase with l-lysine α-oxidase, a commercial enzyme used for l-lysine determination, suggests that the use of l-lysine ε-oxidase would be more valuable for the determination of l-lysine because of its selectivity and sensitivity, especially in samples with low l-lysine concentration. The enzyme acted only on l-lysine and l-ornithine, to which the relative activity was only 3.4% of that on l-lysine. The value obtained by the colorimetric assay using l-lysine ε-oxidase and horseradish peroxidase was not affected by l-ornithine. The enzyme also shows a higher affinity for l-lysine (K_m = 0.0018 mM). l-Lysine determination using l-lysine ε-oxidase in human plasma and serum was examined. The measured values were close to values determined by instrumental analyses using the precolumn AccQ·Tag Ultra Derivatization Kit. These results suggest that l-lysine ε-oxidase can be used for diagnosis based on plasma l-lysine concentration. This is the first report on the application of l-lysine ε-oxidase.     

Nafion/lead nitroprusside nanoparticles modified carbon ceramic electrode as a novel amperometric sensor for l-cysteine

This work describes the electrochemical and electrocatalytic properties of carbon ceramic electrode (CCE) modified with lead nitroprusside (PbNP) nanoparticles as a new electrocatalyst material. The structure of deposited film on the CCE was characterized by energy dispersive X-ray (EDX), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). The cyclic voltammogram (CV) of the PbNP modified CCE showed two well-defined redox couples due to [Fe(CN)₅NO]³⁻/[Fe(CN)₅NO]²⁻ and Pb^IV/Pb^II redox reactions. The modified electrode showed electrocatalytic activity toward the oxidation of l-cysteine and was used as an amperometric sensor. Also, to reduce the fouling effect of l-cysteine and its oxidation products on the modified electrode, a thin film of Nafion was coated on the electrode surface. The sensor response was linearly changed with l-cysteine concentration in the range of 1 × 10⁻⁶ to 6.72 × 10⁻⁵ mol L⁻¹ with a detection limit (signal/noise ratio [S/N] = 3) of 0.46 μM. The sensor sensitivity was 0.17 μA (μM)⁻¹, and some important advantages such as simple preparation, fast response, good stability, interference-free signals, antifouling properties, and reproducibility of the sensor for amperometric determination of l-cysteine were achieved.     

A comparative study of complex formation in the reactions of gold(III) with Gly-Gly, Gly-l-Ala and Gly-l-His dipeptides

Proton NMR spectroscopy was applied to study the reactions of the dipeptides glycyl-glycine (Gly-Gly) and glycyl-l-alanine (Gly-l-Ala) with hydrogen tetrachloridoaurate(III) (H[AuCl₄]). All reactions were performed at pH 2.0 and 3.0 and at 40 °C. The final products in these reactions were [Au(Gly-Gly-κ³N_G1,N_G2,O_G2)Cl] and [Au(Gly-l-Ala-κ³N_G,N_A,O_A)Cl] complexes. Tridentate coordination of the corresponding dipeptides and square-planar geometry of these Au(III) complexes was confirmed by NMR (¹H and ¹³C) spectroscopy. This study showed that at pH < 3.0 the Au(III) ion was able to deprotonate the amide nitrogen atom. However this displacement reaction was very slow and the total concentration of the corresponding Au(III)-peptide complex formed after 5 days was less than 60% for the Gly-l-Ala or 70% for the Gly-Gly dipeptide. The kinetic data of the reactions between the Gly-Gly and Gly-l-Ala dipeptides and [AuCl₄]⁻ were compared with those for the histidine-containing Gly-l-His dipeptide. The differences in the reactivity of these three dipeptides with the Au(III) ion are discussed.     

Preparation of a new chromogenic substrate to assay for β-galactanases that hydrolyse type II arabino-3,6-galactans

A chromogenic assay using RB5-dGA, Reactive Black 5 (RB5) dye covalently coupled to de-arabinosylated gum arabic (dGA), was developed for rapid screening of β-galactanases. dGA was prepared by partial acid hydrolysis (0.25 M trifluoroacetic acid for 2 h at 90-95 °C) of gum Arabic (GA) from Acacia senegal. The dGA exhibited a median molecular mass of ∼10 kDa, corresponding to a degree of polymerisation (DP) ∼60. It was devoid of Ara residues, and contained mostly Galp (68 mol %) together with GlcpA (30 mol %). The Galp residues were (1,6)- (34 mol %), (1,3)- (3 mol %) and (1,3,6)- (26 mol %) linked, and the GlcAp residues were primarily terminal (28 mol %) together with a small amount of (1,4)-linked (2 mol %), as expected for a type II (3,6)-galactan. The new chromogenic assay is simple, cost effective, relatively sensitive, and is specific for either β-(1→3)- and/or β-(1→6)-d-galactanases. It will enable routine large-scale screening of β-galactanases from crude enzyme preparations and microorganism cultures, and is suitable for profiling activity during purification processes.     

High-throughput determination of free D-aspartic acid in mammals by enzyme immunoassay using specific monoclonal antibody

A method for rapid determination of free d-aspartic acid (d-Asp) in mammals has been established using a highly specific mouse monoclonal antibody against d-Asp for the first time. An anti-d-Asp monoclonal antibody was obtained by the immunization of bovine-serum-albumin-conjugated d-Asp to BALB/c mice. The obtained antibody has a high specificity toward d-Asp but shows a slight cross-reactivity to all other d- and l- amino acids including l-Asp. The calibration range of the competitive enzyme linked immunosorbent assay (ELISA) is 0.016-16 μmol/mL d-Asp in rat serum samples. The precisions of this method were evaluated by inter-plate and intraplate assays, and the relative standard deviation values were 4.8% and 4.5%, respectively. The values of d-Asp determined by the present ELISA have a good correlation to those determined by high-performance liquid chromatography with the correlation coefficient of 0.963. Using this ELISA, the time course of d-Asp in the rat serum after intravenous administration was successfully demonstrated. The present method provides a simple and high-throughput determination of d-Asp in mammals, and is a useful tool for clarifying the physiological roles and diagnostic values of this d-amino acid.     

Synergistic production of L-arabinose from arabinan by the combined use of thermostable endo- and exo-arabinanases from Caldicellulosiruptor saccharolyticus

The optimum conditions for the production of l-arabinose from debranched arabinan were determined to be pH 6.5, 75 °C, 20 g l⁻¹ debranched arabinan, 42 U ml⁻¹ endo-1,5-α-l-arabinanase, and 14 U ml⁻¹ α-l-arabinofuranosidase from Caldicellulosiruptor saccharolyticus and the conditions for sugar beet arabinan were pH 6.0, 75 °C, 20 g l⁻¹ sugar beet arabinan, 3 U ml⁻¹ endo-1,5-α-l-arabinanase, and 24 U ml⁻¹ α-l-arabinofuranosidase. Under the optimum conditions, 16 g l⁻¹l-arabinose was obtained from 20 g l⁻¹ debranched arabinan or sugar beet arabinan after 120 min, with a hydrolysis yield of 80% and a productivity of 8 g l⁻¹ h⁻¹. This is the first reported trial for the production of l-arabinose from the hemicellulose arabinan by the combined use of endo- and exo-arabinanases.     

Single-step bioconversion for the preparation of l-gulose and l-galactose

Both carbohydrate monomers l-gulose and l-galactose are rarely found in nature, but are of great importance in pharmacy R&D and manufacturing. A method for the production of l-gulose and l-galactose is described that utilizes recombinant Escherichia coli harboring a unique mannitol dehydrogenase. The recombinant E. coli system was optimized by genetic manipulation and directed evolution of the recombinant protein to improve conversion. The resulting production process requires a single step, represents the first readily scalable system for the production of these sugars, is environmentally friendly, and utilizes inexpensive reagents, while producing l-galactose at 4.6 g L⁻¹ d⁻¹ and l-gulose at 0.90 g L⁻¹ d⁻¹.     

X-ray structure of 1,3,4-tri-O-acetyl-2-deoxy-β-d-erythro-pentopyranose

Peracetylated 2-deoxy-d-erythro-pentose (2-deoxy-d-ribose) was synthesized through the acetylation of 2-deoxy-d-ribose with acetic anhydride in pyridine, and the products (including all four ring forms) exist in form of either a white solid or a syrup. A single crystal of 1,3,4-tri-O-acetyl-2-deoxy-β-d-erythro-pentopyranose was obtained from the syrup and its structure was determined by X-ray diffraction. The crystal adopts the ¹C₄ conformation, presenting an orthorhombic system, space group P2₁2₁2₁ with Z = 4, unit cell dimensions a = 7.2274 (3) Å, b = 8.0938 (5) Å, and c = 22.0517 (11) Å.     

Oxidation of methyl α-d-galactopyranoside by galactose oxidase: products formed and optimization of reaction conditions for production of aldehyde

The reaction conditions of galactose oxidase-catalyzed, targeted C-6 oxidation of galactose derivatives were optimized for aldehyde production and to minimize the formation of secondary products. Galactose oxidase, produced in transgenic Pichia pastoris carrying the galactose oxidase gene from Fusarium spp., was used as catalyst, methyl α-d-galactopyranoside as substrate, and reaction medium, temperature, concentration, and combinations of galactose oxidase, catalase, and horseradish peroxidase were used as variables. The reactions were followed by ¹H NMR spectroscopy and the main products isolated, characterized, and identified. An optimal combination of all the three enzymes gave aldehyde (methyl α-d-galacto-hexodialdo-1,5-pyranoside) in approximately 90% yield with a substrate concentration of 70 mM in water at 4 °C using air as oxygen source. Oxygen flushing of the reaction mixture was not necessary. The aldehyde existed as a hydrate in water. The main secondary products, a uronic acid (methyl α-d-galactopyranosiduronic acid) and an α,β-unsaturated aldehyde (methyl 4-deoxy-α-d-threo-hex-4-enodialdo-1,5-pyranoside), were observed for the first time to form in parallel. Formation of uronic acid seemed to be the result of impurities in the galactose oxidase preparation. ¹H and ¹³C NMR data of the products are reported for the α,β-unsaturated aldehyde for the first time, and chemical shifts in DMSO-d₆ for all the products for the first time. Oxidation of d-raffinose (α-d-galactopyranosyl-(1-6)-α-d-glucopyranosyl-(1-2)-β-d-fructofuranoside) in the same optimum conditions also proceeded well, resulting in approximately 90% yield of the corresponding aldehyde.     

Synthesis and antitubercular activity of novel Schiff bases derived from d-mannitol

Six Schiff base derivatives of d-mannitol, 1,6-dideoxy-1,6-bis-{[(E)-arylmethylidene]amino}-d-mannitol (6: aryl = XC₆H₄: X = o-, m- and p- Cl or NO₂), have been synthesized and evaluated for their in vitro antibacterial activity against Mycobacterium tuberculosis H₃₇Rv using the Alamar Blue susceptibility test and the activity expressed as the minimum inhibitory concentration (MIC) in μg/mL. All three nitro derivatives exhibit significant activities: activities of (6d: X = o-NO₂), (6e: X = m-NO₂) and (6f: X = p-NO₂) are 12.5, 25.0 and 25.0 μg/mL, respectively. When compared with first line drugs, such as ethambutol, they can be considered as a good starting point to develop new lead compounds for the treatment of multidrug-resistant tuberculosis. Characterization of the new compounds 6 is generally achieved spectroscopically. The structure of compound 3 has been confirmed by X-ray crystallography.     

Fabrication of chronocoulometric DNA sensor based on gold nanoparticles/poly(l-lysine) modified glassy carbon electrode

In this work, we fabricated a sensitivity chronocoulometric DNA sensor (CDS) based on gold nanoparticles (AuNPs)/poly(l-lysine) complex film modified glassy carbon electrode. Hexaammineruthenium(III) chloride ([Ru(NH₃)₆]³⁺) was used as the electroactive indicator. The assembled process was investigated by cyclic voltammetry (CV) and chronocoulometry (CC). CC is used to monitor the DNA hybridization event by measurement of electrostatic binding [Ru(NH₃)₆]³⁺. Under the optimal conditions, the signal of [Ru(NH₃)₆]³⁺ was linear with the logarithm of the concentration of the complementary oligonucleotides from 1.0 × 10⁻¹³ to 1.0 × 10⁻¹¹ M, and the detection limit is 3.5 × 10⁻¹⁴ M.     

Hydrogen peroxide targets the cysteine at the active site and irreversibly inactivates creatine kinase

In our study, we showed that at a relatively low concentration, H₂O₂ can irreversibly inactivate the human brain type of creatine kinase (HBCK) and that HBCK is inactivated in an H₂O₂ concentration-dependent manner. HBCK is completely inactivated when incubated with 2 mM H₂O₂ for 1 h (pH 8.0, 25 °C). Inactivation of HBCK is a two-stage process with a fast stage (k₁ = 0.050 ± 0.002 min⁻¹) and a slow (k₂ = 0.022 ± 0.003 min⁻¹) stage. HBCK inactivation by H₂O₂ was affected by pH and therefore we determined the pH profile of HBCK inactivation by H₂O₂. H₂O₂-induced inactivation could not be recovered by reducing agents such as dl-dithiothreitol, N-acetyl-l-cysteine, and l-glutathione reduced. When HBCK was treated with DTNB, an enzyme substrate that reacts specifically with active site cysteines, the enzyme became resistant to H₂O₂. HBCK binding to Mg²⁺ATP and creatine can also prevent H₂O₂ inactivation. Intrinsic and 1-anilinonaphthalene-8-sulfonate-binding fluorescence data showed no tertiary structure changes after H₂O₂ treatment. The thiol group content of H₂O₂-treated HBCK was reduced by 13% (approximately 1 thiol group per HBCK dimer, theoretically). For further insight, we performed a simulation of HBCK and H₂O₂ docking that suggested the CYS283 residue could interact with H₂O₂. Considering these results and the asymmetrical structure of HBCK, we propose that H₂O₂ specifically targets the active site cysteine of HBCK to inactivate HBCK, but that substrate-bound HBCK is resistant to H₂O₂. Our findings suggest the existence of a previously unknown negative form of regulation of HBCK via reactive oxygen species.     

Microwave-enhanced reductive amination via Schiff's base formation for block copolymer synthesis

Reductive amination via Schiff's base formation is a widely used reaction for laboratory and industrial applications ranging from protein immobilization to nanoparticle synthesis. One major limitation of this reaction is the slow kinetics and hence, it can take several days for the reaction to reach completion. Here we demonstrate that electromagnetic microwave can be used to accelerate the rate of reduction amination. To demonstrate proof of concept, we utilized the reductive amination between reducing end of dextran and primary amine from N-Boc-ethylenediamine as a model reaction. The reaction was conducted at room temperature to demonstrate that the enhancement was mainly due to electromagnetic effects of the microwave rather than thermal effects. We show that reductive amination reaction time was reduced from 72 h to 4 h using microwave irradiation. These results indicate non-thermal microwave effects to expedite reductive amination for synthesizing copolymers. The efficient conjugation of dextran using reductive amination provides an important tool for developing biocompatible copolymers using carbohydrates.