Effect of influent COD/N ratio on biological nitrogen removal (BNR) from high-strength ammonium industrial wastewater

The effect of influent COD/N ratio on biological nitrogen removal (BNR) from high-strength ammonium industrial wastewater was investigated. Experiments were conducted in a modified Ludzack–Ettinger pilot-plant configuration for 365 days. Total nitrification of an influent concentration of 1200 mg NH₄⁺–N l⁻¹ was obtained in this period. Influent COD/N ratios between 0.71 and 3.4 g COD g N⁻¹ were tested by varying the nitrogen loading rate (NLR) supplied to the pilot plant. An exponential decrease of nitrification rate was observed when the influent COD/N ratio increased.

The experimental COD/N ratio for denitrification was 7.1±0.8 g COD g N⁻¹ while the stoichiometric ratio was 4.2 g COD g N⁻¹. This difference is attributable to the oxidation of organic matter in the anoxic reactor with the oxygen of the internal recycle. The influence of influent COD/N ratio on the treatment of high-strength ammonium industrial wastewater can be quantified with these results. The influence of COD/N ratio should be one of the main parameters in the design of biological nitrogen removal processes in industrial wastewater treatment.     

Impact of COD/N ratio on nitrous oxide emission from microcosm wetlands and their performance in removing nitrogen from wastewater

Constructed wetlands (CWs) are considered to be important sources of nitrous oxide (N₂O). In order to investigate the effect of influent COD/N ratio on N₂O emission and control excess emission from nitrogen removal, free water surface microcosm wetlands were used and fed with different influent. In addition, the transformation of nitrogen was examined for better understanding of the mechanism of N₂O production under different operating COD/N ratios. It was found that N₂O emission and the performance of microcosm wetlands were significantly affected by COD/N ratio of wastewater influent. Strong relationships exist between N₂O production rate and nitrite (r = 0.421, p < 0.01). During denitrification process, DO concentration crucially influences N₂O production rate. An optimal influent COD/N ratio was obtained by adjusting external carbon sources for most effective N₂O emission control and best performance of the CWs in nitrogen removal from wastewater. It is concluded that under the operating condition of COD/N ratio = 5, total N₂O emission is minimum and the microcosm wetland is most effective in wastewater nitrogen removal.     

Effects of different carbon supplements on phosphorus removal in low C/P ratio industrial wastewater

This study focuses on the effects of different carbon supplements on biological phosphorus removal in the optonics and semiconductor industrial wastewater treatment. Experimental results demonstrate that the addition of a carbon source (glucose, acetate, and digester supernatant) improved phosphorus removal effectively. When the COD/P ratios were controlled in the range of 18-20 (using glucose and supernatant as supplement), the acclimated sludge showed more than 98% removal of phosphorus. In addition, different organic carbons induce dissimilar behavior in anaerobic release and aerobic uptake of phosphorus. The glucose supplement induces significant phosphorus release in anaerobic phase and then an increased phosphorus uptake in aerobic phase. The released phosphorus descended in anaerobic phase when acetate and supernatant were added. There was a good linear relationship of first order reaction between initial COD concentration and specific substrate utilization rate in anaerobic phase.     

Effects of influent DO/COD ratio on the performance of an anaerobic fluidized bed reactor fed low-strength synthetic wastewater

The effect of influent DO/COD (dissolved oxygen/chemical oxygen demand) ratio on the performance of an anaerobic fluidized bed reactor (AFBR) containing GAC was studied. A high influent DO concentration was found to have adverse impacts on organic removal efficiency, methane production, and effluent suspended solids (SS) concentration. These problems resulted with a DO/COD ratio of 0.12, but not at a lower ratio of 0.05. At first organic removal appeared satisfactory at the higher DO/COD ratio at a hydraulic retention time of 0.30 h, but soon a rapid growth of oxygen-consuming zoogloeal-like organisms resulted, eventually causing high effluent SS concentrations. The influent DO also had an inhibitory effect, resulting in a long recovery time for adequate methanogenic activity to return after influent DO removal began. With the growing interest in anaerobic treatment of low COD wastewaters, the increased possibility of similar adverse DO effects occurring needs consideration.     

Kinetic model of a granular sludge SBR: influences on nutrient removal

A mathematical model was developed that can be used to describe an aerobic granular sludge reactor, fed with a defined influent, capable of simultaneously removing COD, nitrogen and phosphate in one sequencing batch reactor (SBR). The model described the experimental data from this complex system sufficiently. The effect of process parameters on the nutrient removal rates could therefore be reliably evaluated. The influence of oxygen concentration, temperature, granule diameter, sludge loading rate, and cycle configuration were analyzed. Oxygen penetration depth in combination with the position of the autotrophic biomass played a crucial role in the conversion rates of the different components and thus on overall nutrient removal efficiencies. The ratio between aerobic and anoxic volume in the granule strongly determines the N-removal efficiency as it was shown by model simulations with varying oxygen concentration, temperature, and granule size. The optimum granule diameter for maximum N- and P-removal in the standard case operating conditions (DO 2 mg L(-1), 20 degrees C) was found between 1.2 and 1.4 mm and the optimum COD loading rate was 1.9 kg COD m(-3) day(-1). When all ammonia is oxidized, oxygen diffuses to the core of the granule inhibiting the denitrification process. In order to optimize the process, anoxic phases can be implemented in the SBR-cycle configuration, leading to a more efficient overall N-removal. Phosphate removal efficiency mainly depends on the sludge age; if the SRT exceeds 30 days not enough biomass is removed from the system to keep effluent phosphate concentrations low.     

Integration of a Coagulation/Flocculation step in a biological sequencing batch reactor for COD and nitrogen removal of supernatant of anaerobically digested piggery wastewater

The supernatant from mesophilic anaerobic digestion of piggery wastewater is characterised by a high amount of COD (4.1 g COD L(-1)), ammonium (2.3g NH(4)(+)-NL(-1)) and suspended solids (2.5 g SS L(-1)). This effluent can be efficiently treated by means of a Sequencing Batch Reactor (SBR) strategy for biological COD, SS and nitrogen removal including a Coagulation/Flocculation step. Total COD and SS reduction yields higher than 66% and 74%, respectively, and a total nitrogen removal (via nitrite) of more than 98% were reached when working with HRT 2.7 days, SRT 12 days, temperature 32 degrees C, three aerobic/anoxic periods, without external control of pH and under limited aeration flow. The inhibition of nitrite oxidizing biomass was achieved by the working free ammonia concentration and the restricted air supply (dissolved oxygen concentration below 1 mg O(2)L(-1)). Since a part of the total COD was colloidal and/or refractory, a Coagulation/Flocculation step was implemented inside the SBR operating strategy to meet a suitable effluent quality to be discharged. Several Jar-Tests demonstrated that the optimal concentration of FeCl(3) was 800 mg L(-1). A respirometric assay showed that this coagulant dosage did not affect the biological activity of nitrifying/denitrifying biomass.     

Effect of ferrous sulphate on nitrification during simultaneous phosphorus removal from domestic wastewater using a laboratory scale anoxic/oxic reactor

In the present study a laboratory scale anoxic/oxic reactor was used to remove the important eutrophication nutrients such as phosphorus and nitrogen from synthetic domestic wastewater. Phosphorus was removed through simultaneous precipitation and was carried out using the coagulant ferrous sulphate FeSO₄ · 7H₂O. Total phosphorus in the effluent was controlled to below 1 mg/l using a ferrous to phosphorus molar ratio of 2.1. pH after the addition of coagulant plays a major role in determining the molar ratio of the precipitant. Nitrogen was removed biologically in the anoxic/oxic system and the effect of simultaneous precipitation on nitrification and denitrification was investigated. The nitrification rate of the system remained unaffected during simultaneous precipitation and varied from 0.046 to 0.059 g N–NH₄ ⁺/g VSS/day. Denitrification was complete and was not affected by the coagulation process. The nitrogen removal efficiency varied from 78% to 85%. COD removal efficiency was not affected during simultaneous precipitation and was varied from 94% to 98%. The highly efficient nitrogen removal in the presence of simultaneous precipitant ferrous sulphate makes the process an ideal option for nutrient removal.     

Nitrogen removal from wastewater in vertical flow constructed wetlands containing LWA/gravel layers and reed vegetation

The influence of light weight aggregates made of fly ash from sewage sludge thermal treatment (FASSTT LWA) on the nitrogen removal efficiency from artificial wastewater in constructed wetlands (CW) with vertical flow reed bed was investigated. Thirty lysimeters with six different double-layer bed constructions (upper layer of FASSTT LWA with thicknesses of: 0 cm, 12 cm, 25 cm, 50 cm, and 100 cm of the total depth of the lysimeter, above a lower gravel layer), either with or without reed plants were operated with wastewater hydraulic loading rate of 4.67 mm/d. During a six-month experiment, high efficiency of ammonia removal was observed. The influence of FASSTT LWA as a bed material and the presence of reed on CW treatment efficiency was determined. The highest total nitrogen removal efficiency, 59.5%, was obtained in the CW with double-layer lysimeters consisting of 25% FASSTT LWA (upper layer), and 75% gravel (lower layer), and planted with reed.     

Nitrogen removal from slaughterhouse wastewater in a sequencing batch reactor under controlled low DO conditions

The aim of this study was to examine nitrogen removal from slaughterhouse wastewater in a laboratory-scale sequencing batch reactor (SBR) operated at low dissolved oxygen (DO) levels under two aeration strategies: intermittent aeration (IA) and continuous aeration (CA). Under the IA strategy, during the aeration periods, the maximum DO was controlled at 10% saturation; under the CA strategy, in the first hour of the react phase, the DO was maintained at 10% saturation, and then it was kept at 2–3% saturation in the remaining react phase. Total nitrogen removals of up to 95 and 91% were achieved under the IA and CA aeration strategies, respectively. It is proposed that in situ measurement of oxygen utilization rates can be used to control the operation of SBRs for nitrogen removal.     

进水碳氮比对CANON型人工湿地脱氮性能的影响

通过逐步提高进水中的有机碳源浓度,探讨进水碳氮比(C/N)对基于亚硝化的全程自养脱氮(CANON)型潮汐流人工湿地(TFCW)脱氮效能及其微生物特性的影响.结果表明: 进水C/N可显著影响CANON型TFCW中脱氮功能微生物的数量与活性,进而影响其氮素转化速率.当进水C/N由0.0增至6.0时,TFCW中反硝化功能基因的丰度随之增加,系统反硝化性能提高,TFCW中逐渐形成同步亚硝化、厌氧氨氧化与反硝化(SNAD)耦合反应体系,其脱氮效果得以强化.当进水C/N＞6.0时,好氧氨氧化菌活性受到抑制,数量逐渐减少,TFCW中的厌氧氨氧化作用与反硝化作用受阻,系统脱氮性能恶化.当进水C/N为6.0时,TFCW中的SNAD作用可得到最大限度的强化,其总氮(TN)去除率和去除负荷分别达(93.3±2.3)%和(149.30±8.00) mg·L^-1·d^-1,高于CANON系统中TN去除率的理论值.     

Enhanced denitrifying phosphorous removal in a novel anaerobic/aerobic/anoxic (AOA) process with the diversion of internal carbon source

A novel anaerobic/aerobic/anoxic (AOA) process is proposed to realize denitrifying phosphorous removal in this study, and the characteristic of the AOA process is transferring part of the anaerobic mixed liquor to the post-anoxic zone for providing the carbon source needed for denitrification. The AOA process was operated for 3 months, and the average removal efficiencies of NH4+-N, TN and PO4(3-)-P were 93.0±3.1%, 70.3±2.9% and 87.3±11.8%, respectively. A mass balance analysis indicated that 0.49±0.02 g VSS(-1) d(-1) of PO4(3-)-P and 0.23±0.04 g VSS(-1) d(-1) of NO3--N were simultaneously removed in the anoxic zone, and it is speculated that denitrifying phosphorous removal occurred in the AOA process. Furthermore, 0.24±0.06 g VSS(-1) d(-1) of TN was removed in the aerobic zone via simultaneous nitrification and denitrification (SND). The results demonstrate that the multi-zone structure of the AOA process favors the enhancement of denitrifying phosphorous removal and SND for municipal wastewater treatment.     

Effect of anoxic/aerobic phase fraction on N2O emission in a sequencing batch reactor under low temperature

Laboratory scale anoxic/aerobic sequencing batch reactor (A/O SBR) was operated around 15 °C to evaluate the effect of anoxic/aerobic phase fraction (PF) on N₂O emission. The ammonia removal exhibited a decrease trend with the increase of PF, while the highest total nitrogen removal was achieved at PF = 0.5. Almost all the N₂O was emitted during the aerobic phase, despite of the PF value. However, the net emission of N₂O was affected by PF. Under the premise of completely aerobic nitrification, the lowest N₂O emission was achieved at PF = 0.5, with a N₂O-N conversion rate of 9.8%. At lower PF (PF = 0.2), N₂O emission was stimulated by residual nitrite caused by uncompleted denitrification during the anoxic phase. On the other hand, the exhaustion of the easily degradable carbon was the major cause for the high N₂O emission at higher PF (PF = 0.5). The N₂O emission increased with the decreasing temperature. The time-weighted N₂O emission quantity at 15 °C was 2.9 times higher than that at 25 °C.     

Nitrogen removal from wastewaters at low C/N ratios with ammonium and acetate as electron donors

A denitrifying upflow anaerobic sludge blanket (UASB) reactor was operated at different nitrate loading rates at a C/N ratio of 1.2, with acetate as an electron donor. This resulted in an increase in the accumulation of nitrite. After this, the UASB reactor was supplemented with 100 mg NH4+-Nl(-1) d(-1), while acetate was gradually limited in the medium. This prevented nitrite accumulation at a C/N ratio of 0.6 due to an enhanced nitrite reduction rate achieved in the reactor. An increasing amount of ammonium was consumed when the C/N ratio was lowered in the medium. This suggested that ammonium was used as an alternative electron donor during denitrification, which is supported by nitrogen balances. Nitrite was shown to be toxic for the nitrogen removal process at 200-400 mg NO2--N(l(-1) when the C/N ratio was decreased to 0.4 leading to formation of ammonium. The present study showed that addition of ammonium as an alternative electron donor for denitrification achieved a nitrogen removal process with negligible accumulation of undesirable intermediates.     

基于好氧反硝化及反硝化聚磷菌强化的低温低碳氮比生活污水生物处理中试研究

【背景】低碳氮比生活污水很难达标处理,多级A/O工艺、生物强化技术及生物膜技术的有机结合可有效解决这一问题。【目的】开发出一种泥膜共生多级A/O工艺并进行中试研究,驯化出高效脱氮除磷菌剂并对系统进行生物强化。【方法】通过测定中试设备出水及污水处理厂出水化学需氧量(Chemical oxygen demand,COD)、氨氮(NH_4~+-N)、硝氮(NO_3~--N)、总氮(Total nitrogen,TN)、总磷(Total phosphorus,TP)对比分析两种工艺的污染物去除效能,利用高通量测序技术对比生物强化技术对系统微生物群落结构的影响。【结果】中试设备对COD、NH_4~+-N、NO_3~--N、TN、TP的去除效果均优于污水处理厂的处理工艺;驯化的低温好氧反硝化菌TN去除率最大值可达84.21%,驯化的低温反硝化聚磷菌群对磷的去除率最高可达85.75%;利用驯化菌群对中试设备进行生物强化后较好地改善了系统NH_4~+-N、NO_3~--N、TN、TP的去除效果;经生物强化后,具有好氧反硝化和反硝化聚磷功能的Pseudomonas菌群明显增多。【结论】泥膜共生多级A/O工艺对于低碳氮比生活污水的处理具有很好的效果,利用生物强化技术可有效提高低温条件下系统污染物去除效能。