Antimicrobial Activity of a Novel Vascular Access Film Dressing Containing Chlorhexidine Gluconate

Background

Covering insertion sites with chlorhexidine impregnated dressings has been proven to be clinically effective in reducing catheter related blood stream infections (CR-BSI). Two chlorhexidine gluconate (CHG)-impregnated dressings are commercially available, a polyurethane foam disk and a film dressing containing a chlorhexidine gluconate-impregnated gel pad. While both have demonstrated efficacy in clinical settings, the major drawback of high cost and impaired IV insertion site visibility limits their usage. A new, simple film dressing containing CHG within its adhesive layer is now available. The objective of this study was to test the in vitro antimicrobial efficacy of the new dressing in comparison to the CHG-impregnated gel dressing.

Methods

Quantitative aliquots of suspensions (concentration of 1.0x10⁶ to 5.0x10⁶ cfu/sample) of clinically relevant challenge organisms (Staphylococcus species, gram-negative bacilli, Candida albicans) were incubated in contact with the new CHG-containing film dressing, a placebo version of the same (negative control) and the commercially available CHG-impregnated gel dressing (positive control). Serial dilutions of the surviving organisms were quantified using the pour plate after 1, 3, 5, and 7 days of incubation in order to calculate an antimicrobial log₁₀ reduction for each organism/dressing combination at each point in time.

Results

The new CHG-containing film dressing delivered greater than 5.0 log₁₀ reduction throughout the 7 days on all aerobic gram-negative bacilli and Staphylococcus species tested. As of day 1 the CHG-containing film dressing provided greater than 5.0 log₁₀ reduction on Candida albicans. There were no statistically significant differences in the log₁₀ reduction between the two dressings tested.

Conclusion

The new CHG-containing film dressing was found to be as effective as the chlorhexidine gluconate-impregnated gel dressing on clinically relevant microbes.     

Gentamicin-Loaded Wound Dressing With Polyvinyl Alcohol/Dextran Hydrogel: Gel Characterization and In Vivo Healing Evaluation

To develop a gentamicin-loaded wound dressing, cross-linked hydrogel films were prepared with polyvinyl alcohol (PVA) and dextran using the freezing–thawing method. Their gel properties such as gel fraction, swelling, water vapor transmission test, morphology, tensile strength, and thermal property were investigated. In vitro protein adsorption test, in vivo wound healing test, and histopathology were performed. Dextran decreased the gel fraction, maximum strength, and thermal stability of hydrogels. However, it increased the swelling ability, water vapor transmission rate, elasticity, porosity, and protein adsorption. The drug gave a little positive effect on the gel properties of hydrogels. The gentamicin-loaded wound dressing composed of 2.5% PVA, 1.13% dextran, and 0.1% drug was more swellable, flexible, and elastic than that with only PVA because of its cross-linking interaction with PVA. In particular, it could provide an adequate level of moisture and build up the exudates on the wound area. From the in vivo wound healing and histological results, this gentamicin-loaded wound dressing enhanced the healing effect more compared to conventional product because of the potential healing effect of gentamicin. Thus, this gentamicin-loaded wound dressing would be used as a potential wound dressing with excellent forming and improved healing effect in wound care.     

FRACTIONATION OF GELATIN

1. It is possible to fractionate gelatin by means of reprecipitation at 23°C. of a salt-free solution of pH 4.7 into two fractions, one of which is soluble in water at any temperature, and a second one which does not dissolve in water even when heated to 80°C. 2. The proportion of the soluble fraction in gelatin is much greater than of the insoluble one. 3. The insoluble fraction of gelatin does not swell when mixed with water, but it does swell in the presence of acid and alkali which finally dissolve it. 4. Blocks of concentrated gel made by dissolving various mixtures of the soluble and insoluble fractions of gelatin in dilute NaOH swell differently when placed in large volumes of dilute buffer solution pH 4.7 at 5°C. The gel consisting of the insoluble material shows only a trace of swelling, while those containing a mixture of soluble and insoluble swell considerably. The swelling increases rapidly as the proportion of the soluble fraction increases. 5. A 5 per cent gel made up by dissolving the insoluble fraction of gelatin in dilute NaOH loses about 70 per cent of its weight when placed in dilute buffer pH 4.7 at 5°C. A similar gel made up of ordinary gelatin loses only about 20 per cent of its weight under the same conditions. 6. It was not found possible to resynthesize isoelectric gelatin from its components. 7. An insoluble substance similar in many respects to the one obtained by reprecipitation of gelatin is produce on partial hydrolysis of gelatin in dilute hydrochloric acid at 90°C.     

Characterisation of the bacteria associated with barnacle,Balanus amphitrite,shell and their role in gregarious settlement of cypris larvae

The acorn barnacle Balanus amphitrite (syn. Amphibalanus amphitrite) is a model organism to investigate pelago-benthic transitions in marine invertebrates. A driver for larval settlement in this organism is the need to attach close to conspecifics, to allow reproduction to take place. Adult barnacles are covered by microbial biofilms and the contribution of these biofilms to conspecific recognition is not fully understood. Little information is available on microbial communities associated with B. amphitrite. We compared biofilm communities from the barnacle shell surface with those from the surrounding rocks using the culture-independent methods of quantitative PCR and denaturing gradient gel electrophoresis. Quantification of the relative abundances of higher bacterial taxa showed that barnacles hosted a greater proportion of α-Proteobacteria compared to rock-associated biofilms (p < 0.01). Differences in relative abundances of other taxa were not observed but DGGE profiling suggested that differences were present at lower taxonomic levels. The capacity of these communities to influence larval settlement was assessed by growing multispecies biofilms on artificial medium, obtained by extracting nutrients from adult barnacles. Biofilms composed of shell-associated bacteria were capable of promoting conspecific settlement by 67% compared to control surfaces (p < 0.05), while rock-associated communities showed contrasting effects. A taxonomic comparison of settlement-stimulating and -inhibiting bacteria was performed by DGGE and band sequencing. All partial 16S rRNA genes sequenced were similar to members of the Vibrio and Pseudoalteromonas genera, suggesting that larvae can detect and respond to variations in the composition of microbial biofilms at low taxonomic levels. Our results indicate that barnacle larvae may be able to detect parentally-associated biofilms and use this information to settle close to members of its own species.     

Metamorphosis of a Scleractinian Coral in Response to Microbial Biofilms

Microorganisms have been reported to induce settlement and metamorphosis in a wide range of marine invertebrate species. However, the primary cue reported for metamorphosis of coral larvae is calcareous coralline algae (CCA). Herein we report the community structure of developing coral reef biofilms and the potential role they play in triggering the metamorphosis of a scleractinian coral. Two-week-old biofilms induced metamorphosis in less than 10% of larvae, whereas metamorphosis increased significantly on older biofilms, with a maximum of 41% occurring on 8-week-old microbial films. There was a significant influence of depth in 4- and 8-week biofilms, with greater levels of metamorphosis occurring in response to shallow-water communities. Importantly, larvae were found to settle and metamorphose in response to microbial biofilms lacking CCA from both shallow and deep treatments, indicating that microorganisms not associated with CCA may play a significant role in coral metamorphosis. A polyphasic approach consisting of scanning electron microscopy, fluorescence in situ hybridization (FISH), and denaturing gradient gel electrophoresis (DGGE) revealed that coral reef biofilms were comprised of complex bacterial and microalgal communities which were distinct at each depth and time. Principal-component analysis of FISH data showed that the Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria, and Cytophaga-Flavobacterium of Bacteroidetes had the largest influence on overall community composition. A low abundance of Archaea was detected in almost all biofilms, providing the first report of Archaea associated with coral reef biofilms. No differences in the relative densities of each subdivision of Proteobacteria were observed between slides that induced larval metamorphosis and those that did not. Comparative cluster analysis of bacterial DGGE patterns also revealed that there were clear age and depth distinctions in biofilm community structure; however, no difference was detected in banding profiles between biofilms which induced larval metamorphosis and those where no metamorphosis occurred. This investigation demonstrates that complex microbial communities can induce coral metamorphosis in the absence of CCA.     

The effect of breast implants on the radiographic detection of microcalcification and soft-tissue masses

Current implants for breast augmentation containing silicone gel, saline, or both can totally obscure mammographic detection of microcalcifications and soft-tissue masses. To investigate the possibility of developing a more radiolucent implant, radiographs were obtained of silicone shells that contained silicone gel, saline, silicone gel and saline, polyurethane-covered silicone gel, gelatin, sunflower oil, and peanut oil. All radiographs were obtained using a Siemens Mammomat by placing the implant over an American College of Radiology mammography phantom. Results were measured by the ability to visualize or resolve the artifacts in the mammography phantom. The silicone shell alone minimally altered artifact resolution. Silicone shells filled with silicone gel, silicone gel and saline, saline alone, polyurethane-covered silicone gel, and gelatin were equal in radiodensity and completely obscured all phantom artifacts. Silicone shells filled with peanut oil and sunflower oil had equal radiodensity and allowed visualization of large microcalcifications and some soft-tissue masses. Current implants used for augmentation mammaplasty can totally obscure mammographic detection of microcalcifications and soft-tissue masses. A more radiolucent breast implant is possible, and further research is needed to define the best filler material and test its biocompatibility.     

SYNERESIS AND SWELLING OF GELATIN

1. When solid blocks of isoelectric gelatin are placed in cold distilled water or dilute buffer of pH 4.7, only those of a gelatin content of more than 10 per cent swell, while those of a lower gelatin content not only do not swell but actually lose water. 2. The final quantity of water lost by blocks of dilute gelatin is the same whether the block is immersed in a large volume of water or whether syneresis has been initiated in the gel through mechanical forces such as shaking, pressure, etc., even in the absence of any outside liquid, thus showing that syneresis is identical with the process of negative swelling of dilute gels when placed in cold water, and may be used as a convenient term for it. 3. Acid- or alkali-containing gels give rise to greater syneresis than isoelectric gels, after the acid or alkali has been removed by dialysis. 4. Salt-containing gels show greater syneresis than salt-free gels of the same pH, after the salt has been washed away. 5. The acid and alkali and also the salt effect on syneresis of gels disappears at a gelatin concentration above 8 per cent. 6. The striking similarity in the behavior of gels with respect to syneresis and of gelatin solutions with respect to viscosity suggests the probability that both are due to the same mechanism, namely the mechanism of hydration of the micellæ in gelatin by means of osmosis as brought about either by diffusible ions, as in the presence of acid or alkali, or by the soluble gelatin present in the micellæ. The greater the pressures that caused swelling of the micellæ while the gelatin was in the sol state, the greater is the loss of water from the gels when the pressures are removed. 7. A quantitative study of the loss of water by dilute gels of various gelatin content shows that the same laws which have been found by Northrop to hold for the swelling of gels of high concentrations apply also to the process of losing water by dilute gels, i.e. to the process of syneresis. The general behavior is well represented by the equations: See PDF for Equation and See PDF for Equation where P ₁ = osmotic pressure of the soluble gelatin in the gel, P ₂ = stress on the micellæ in the gelatin solution before setting, K_e = bulk modulus of elasticity, V_o = volume of water per gram of dry gelatin at setting and V_e = volume of water per gram of gelatin at equilibrium.     

Enhancement of sequential zymography technique for the detection of thermophilic lipases and proteases

Analysis of lipases and proteases present in cell-free fractions of thermophilic Bacillus sp. cultures were performed in an enhanced sequential zymography method. After the PAGE run, the gel was electrotransferred to another polyacrylamide gel containing a mixture of glycerol tributyrate, olive oil and gelatin. After transference, this substrate-mix gel was incubated for lipase detection, until bands appeared, and later stained with CBB for protease detection. Assets are, besides detecting two enzymes on a single gel, time and material saving.     

Texture of SS Cross-linked Gelatin Gels

Relations among sensory properties, physical characteristics and the kinds of force supporting gel structure were studied by using thiolated gelatin.

Breaking stress of the gelatin gel was greatly influenced by contents of disulfide bonds in the gel. Young’s modulus of the gel was affected by its temperature. As to sensory properties of the gelatin gel, “hardness” highly correlated with Young’s modulus and “brittleness” correlated with breaking stress.

Therefore, it could be concluded that in the case of the gelatin gel, “hardness” was mainly attributed to hydrogen bonds and “brittleness” was to chemical bonds like disulfide linkages.     

Preparation of gelatin microbeads with a narrow size distribution using microchannel emulsification

The purpose of this study was to prepare monodisperse gelatin microcapsules containing an active agent using microchannel (MC) emulsification, a novel technique for preparing water-in-oil (W/O) and oil-in-water (O/W) emulsions. As the first step in applying MC emulsification to the preparation of monodisperse gelatin microcapsules, simple gelatin microbeads were prepared using this technique. A W/O emulsion with a narrow size distribution containing gelatin in the aqueous phase was created as follows. First, the aqueous disperse phase was fed into the continuous phase through the MCs at 40°C (operating pressure: 3.9 kPa). The emulsion droplets had an average particle diameter of 40.7 μm and a relative standard deviation of 5.1%. The temperature of the collected emulsion was reduced and maintained at 25°C overnight. The gelatin microbeads had a smooth surface after overnight gelation; the average particle diameter was calculated to be 31.6 μm, and the relative standard deviation, 7.3%. The temperature was then lowered to 5°C by rapid air cooling and finally dried. The gelatin beads were dried and could be resuspended well in iso-octane. The had an average particle diameter of 15.6 μm, and a relative standard deviation of 5.9%. Using MC emulsification, we were able to prepare gelatin microbeads with a narrow size distribution. Since this emulsification technique requires only a low-energy input, it may create desirable experimental conditions for microencapsulation of unstable substances such as peptides and proteins. This method is promising for making monodisperse microbeads.     

Distinct SagA from Hospital-Associated Clade A1 Enterococcus faecium Strains Contributes to Biofilm Formation

Enterococcus faecium is an important nosocomial pathogen causing biofilm-mediated infections. Elucidation of E. faecium biofilm pathogenesis is pivotal for the development of new strategies to treat these infections. In several bacteria, extracellular DNA (eDNA) and proteins act as matrix components contributing to biofilm development. In this study, we investigated biofilm formation capacity and the roles of eDNA and secreted proteins for 83 E. faecium strains with different phylogenetic origins that clustered in clade A1 and clade B. Although there was no significant difference in biofilm formation between E. faecium strains from these two clades, the addition of DNase I or proteinase K to biofilms demonstrated that eDNA is essential for biofilm formation in most E. faecium strains, whereas proteolysis impacted primarily biofilms of E. faecium clade A1 strains. Secreted antigen A (SagA) was the most abundant protein in biofilms from E. faecium clade A1 and B strains, although its localization differed between the two groups. sagA was present in all sequenced E. faecium strains, with a consistent difference in the repeat region between the clades, which correlated with the susceptibility of biofilms to proteinase K. This indicates an association between the SagA variable repeat profile and the localization and contribution of SagA in E. faecium biofilms.     

Antimicrobial Efficacy of Two Surface Barrier Discharges with Air Plasma against In Vitro Biofilms

The treatment of infected wounds is one possible therapeutic aspect of plasma medicine. Chronic wounds are often associated with microbial biofilms which limit the efficacy of antiseptics. The present study investigates two different surface barrier discharges with air plasma to compare their efficacy against microbial biofilms with chlorhexidine digluconate solution (CHX) as representative of an important antibiofilm antiseptic. Pseudomonas aeruginosa SG81 and Staphylococcus epidermidis RP62A were cultivated on polycarbonate discs. The biofilms were treated for 30, 60, 150, 300 or 600 s with plasma or for 600 s with 0.1% CHX, respectively. After treatment, biofilms were dispensed by ultrasound and the antimicrobial effects were determined as difference in the number of the colony forming units by microbial culture. A high antimicrobial efficacy on biofilms of both plasma sources in comparison to CHX treatment was shown. The efficacy differs between the used strains and plasma sources. For illustration, the biofilms were examined under a scanning electron microscope before and after treatment. Additionally, cytotoxicity was determined by the MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay with L929 mouse fibroblast cell line. The cell toxicity of the used plasma limits its applicability on human tissue to maximally 150 s. The emitted UV irradiance was measured to estimate whether UV could limit the application on human tissue at the given parameters. It was found that the UV emission is negligibly low. In conclusion, the results support the assumption that air plasma could be an option for therapy of chronic wounds.     

Histophilus somni biofilm formation in cardiopulmonary tissue of the bovine host following respiratory challenge

Biofilms form in a variety of host sites following infection with many bacterial species. However, the study of biofilms in a host is hindered due to the lack of protocols for the proper experimental investigation of biofilms in vivo. Histophilus somni is an agent of respiratory and systemic diseases in bovines, and readily forms biofilms in vitro. In the present study the capability of H. somni to form biofilms in cardiopulmonary tissue following experimental respiratory infection in the bovine host was examined by light microscopy, transmission electron microscopy, immunoelectron microscopy of ultrathin cryosections, scanning electron microscopy of freeze-fractured samples, and fluorescent in situ hybridization. Biofilms were evident and most prominent in the myocardium, and were associated with a large amount of amorphous extracellular material. Furthermore, Pasteurella multocida was often cultured with H. somni from heart and lung samples. Transposon mutagenesis of H. somni strain 2336 resulted in the generation of mutants that expressed more or less biofilm than the parent strain. Six mutants deficient in biofilm formation had an insertion in the gene encoding for a homolog of filamentous haemagglutinin (FHA), predicted to be involved in attachment. Thus, this investigation demonstrated that H. somni is capable of forming a biofilm in its natural host, that such a biofilm may be capable of harboring other bovine respiratory disease pathogens, and that the genes responsible for biofilm formation can be identified by transposon mutagenesis.     

Preparation of <Emphasis Type="Italic">in situ</Emphasis> Injectable Chitosan/Gelatin Hydrogel Using an Acid-tolerant Tyrosinase

An in situ injectable chitosan/gelatin hydrogel was formed under slightly acidic conditions (pH 4.0 ~ 4.5) using an acid-tolerant tyrosinase, tyrosinase-CNK. A homogeneous chitosan/tyrosinase-CNK solution was prepared in one part of a dual-barrel syringe, and highly soluble gelatin in distilled water was prepared in the other part of the syringe without any additional crosslinking materials. Chitosan/gelatin hydrogel was formed in situ by simple injection of the solutions at room temperature followed by curing at 37°C. However, conventional mushroom tyrosinase did not catalyze this permanent gel formation. Tyrosinase- CNK-catalyzed glycol chitosan/gelatin hydrogel was similarly formed by this in situ injection approach. The hydrogels exhibited a high swelling ratio of 20-fold their own weight, interconnected micropores with an average diameter of approximately 260 μm and in vitro biodegradability suitable for tissue engineering and drug delivery applications. These results showed that tyrosinase-CNK-mediated chitosan/gelatin hydrogel formation has remarkable potential for the development of novel formulations for in situ injectable gel-forming systems.     

Protein/polysaccharide cogel formation based on gelatin and chemically modified schizophyllan

In the work, aldehyde groups were quantitatively introduced into schizophyllan (SPG) side chains through periodate oxidation. The periodate-oxidized SPG (POSPG) forms an elastic gel with gelatin. The cogel formation is based on the Schiff-base reaction between the amino groups of gelatin chains and the aldehyde groups of POSPG chains. The POSPG/gelatin cogel has an elastomeric character with a very small value of loss tangent. The gelation kinetics and gel properties were discussed as a function of POSPG concentration, gelatin concentration, oxidation degree, temperature, and pH. This method can be used to design a large variety of cogels between SPG and proteins.     

Polysaccharides and Proteins Added to Flowing Drinking Water at Microgram-per-Liter Levels Promote the Formation of Biofilms Predominated by Bacteroidetes and Proteobacteria

Biopolymers are important substrates for heterotrophic bacteria in (ultra)oligotrophic freshwater environments, but information about their utilization at microgram-per-liter levels by attached freshwater bacteria is lacking. This study aimed at characterizing biopolymer utilization in drinking-water-related biofilms by exposing such biofilms to added carbohydrates or proteins at 10 μg C liter⁻¹ in flowing tap water for up to 3 months. Individually added amylopectin was not utilized by the biofilms, whereas laminarin, gelatin, and caseinate were. Amylopectin was utilized during steady-state biofilm growth with simultaneously added maltose but not with simultaneously added acetate. Biofilm formation rates (BFR) at 10 μg C liter⁻¹ per substrate were ranked as follows, from lowest to highest: blank or amylopectin (≤6 pg ATP cm⁻² day⁻¹), gelatin or caseinate, laminarin, maltose, acetate alone or acetate plus amylopectin, and maltose plus amylopectin (980 pg ATP cm⁻² day⁻¹). Terminal restriction fragment length polymorphism (T-RFLP) and 16S rRNA gene sequence analyses revealed that the predominant maltose-utilizing bacteria also dominated subsequent amylopectin utilization, indicating catabolic repression and (extracellular) enzyme induction. The accelerated BFR with amylopectin in the presence of maltose probably resulted from efficient amylopectin binding to and hydrolysis by inductive enzymes attached to the bacterial cells. Cytophagia, Flavobacteriia, Gammaproteobacteria, and Sphingobacteriia grew during polysaccharide addition, and Alpha-, Beta-, and Gammaproteobacteria, Cytophagia, Flavobacteriia, and Sphingobacteriia grew during protein addition. The succession of bacterial populations in the biofilms coincided with the decrease in the specific growth rate during biofilm formation. Biopolymers can clearly promote biofilm formation at microgram-per-liter levels in drinking water distribution systems and, depending on their concentrations, might impair the biological stability of distributed drinking water.     

Hypothesis for the Role of Nutrient Starvation in Biofilm Detachment

A combination of experimental and theoretical approaches was used to investigate the role of nutrient starvation as a potential trigger for biofilm detachment. Experimental observations of detachment in a variety of biofilm systems were made with pure cultures of Pseudomonas aeruginosa. These observations indicated that biofilms grown under continuous-flow conditions detached after flow was stopped, that hollow cell clusters were sometimes observed in biofilms grown in flow cells, and that lysed cells were apparent in the internal strata of colony biofilms. When biofilms were nutrient starved under continuous-flow conditions, detachment still occurred, suggesting that starvation and not the accumulation of a metabolic product was responsible for triggering detachment in this particular system. A cellular automata computer model of biofilm dynamics was used to explore the starvation-dependent detachment mechanism. The model predicted biofilm structures and dynamics that were qualitatively similar to those observed experimentally. The predicted features included centrally located voids appearing in sufficiently large cell clusters, gradients in growth rate within these clusters, and the release of most of the biofilm with simulated stopped-flow conditions. The model was also able to predict biofilm sloughing resulting solely from this detachment mechanism. These results support the conjecture that nutrient starvation is an environmental cue for the release of microbes from a biofilm.     

Effects of Polyols and Sugars on the Sol-Gel Transition of Gelatin

The melting temperature of gelatin gel increased with increasing concentrations of polyols and sugars added at any gelatin concentation. The enthalpy of gel melting measured by Eldridge-Ferry plots and calorimetric measurements was decreased by addition of these polyhydric compounds, indicating that the gel stabilization by them is predominantly due to the large decrease in entropy of gel melting. Circular dichroism analysis showed that the helix formation of gelatin molecules was enhanced with increasing concentrations of these additives, but there was no positive correlation between their helix-forming ability and gel-stabilizing ability. The viscosity of gelatin solution was less in these mixed solvents than in water. Based on these results, a possible stabilization mechanism of gelatin gel by polyhydric compounds was discussed, in comparison with that of native collagen, in terms of the thermodynamics of protein-solvent interactions.     

Variations in carotenoid content and acyl chain composition in exponential,stationary and biofilm states of Staphylococcus aureus,and their influence on membrane biophysical properties

Bacteria are often found in close association with surfaces, resulting in the formation of biofilms. In Staphylococcus aureus (S. aureus), biofilms are implicated in the resilience of chronic infections, presenting a serious clinical problem world-wide. Here, S. aureus biofilms are grown under flow within clinical catheters at 37 °C. The lipid composition and biophysical properties of lipid extracts from these biofilms are compared with those from exponential growth and stationary phase cells. Biofilms show a reduction in iso and anteiso branching compensated by an increase in saturated fatty acids compared to stationary phase. A drastic reduction in carotenoid levels is also observed during biofilm formation. Thermotropic measurements of Laurdan GP and DPH polarization, show a reduction of lipid packing at 37 °C for biofilms compared to stationary phase. We studied the effects of carotenoid content on DMPG and DPPG model membranes showing trends in thermotropic behavior consistent with those observed in bacterial isolates, indicating that carotenoids participate in modulating lipid packing. Additionally, bending elastic constant (k_c) measurements using vesicle fluctuation analysis (VFA) show that the presence of carotenoids can increase membrane bending rigidity. The antimicrobial peptide Magainin H2 was less activity on liposomes composed of stationary phase compared to biofilms or exponential growth isolates. This study contributes to an understanding of how Staphylococcus aureus modulates the composition of its membrane lipids, and how those changes affect the biophysical properties of membranes, which in turn may play a role in its virulence and its resistance to different membrane-active antimicrobial agents.     

Formaldehyde Treated Gelatin as a Gel Exclusion Agent

A high molecular weight fraction of gelatin precipitated from a solution of Difco gelatin with polyethylene glycol has several favourable properties in gel exclusion chromatography. To manufacture the gel exclusion agent, the gelatin was dissolved in hot water, allowed to set in the cold and rendered insoluble by reaction with formaldehyde. When finely disrupted and used as bed material in columns this gel is capable of separating protein components from mixtures of proteins of widely different molecular weights. Favourable properties include elasticity at relatively low concentration, its availability and its inexpensive nature.