Age determination and growth in the hyrax Procavia capensis (Mammalia: Procaviidae)

The use of eye lens weight, tooth eruption and tooth attrition has been investigated as a method for age determination in the hyrax. Illustrations are presented on the stages of eruption to reduce subjectivity of eruption criteria and to aid age determination. All teeth are fully erupted and in wear by five years of age, from which point age determination can be based on attrition of M3. Growth with age is described by means of the von Bertalanffy equation. Asymptotic weight is reached by 60 months, asymptotic body length and body girth by 40 months, and hindfoot length by 35 months. The asymptotes and the coefficient of catabolism (K) are compared with values obtained in other studies.     

Interstitial wear

Interstitial wear refers to the attrition between adjacent teeth. With other characteristics, it has been used to indicate savanna adaptation and to separate hominids from pongids. This work discusses a functional model of the factors causing interproximal attrition based on tooth angulation and masticatory movement. Interstitial wear rates are calculated for chimpanzees, australopithecines, and two living human groups. A much higher wear rate occurs for chimpanzee teeth. Limitations in both the adaptive and the phylogenetic meaning of interstitial wear in hominids are suggested.     

Measurements of tooth wear among Australian Aborigines: I. Serial loss of the enamel crown

The dental casts made from Aboriginal children during the course of a longitudinal growth study in Central Australia provided material for analyzing tooth wear under known environmental conditions. The wear facets produced on the occlusal surfaces were clearly preserved on the dental stone casts and recorded the progress of enamel attrition from ages 6 to 18. These casts were photographed and traced by electronic planimetric methods that automatically recorded the location and size of wear facets on the first and second permanent molars. These areas of worn tooth surface were compared to the total tooth surface. The worn surface was regressed on age to calculate wear rates of each tooth. Discriminant analyses were also performed to determine the significance of dental attrition differences between the sexes at each age group. The total wear on each tooth was highly correlated with age as expected but females wore their teeth at a significantly higher rate than males. The mandibular molars wore more rapidly than maxillary teeth in both sexes. The discriminant analysis successfully grouped 91% of the cases according to age and sex. Pattern of wear, the location, and size of wear facets also differed between age groups and sex. The questions of why there is a difference between male and female wear or why there is greater wear on one arch or arch region have no ready answers. The differing rates and pattern of dental wear do suggest that arch shape and growth rates may be the answer though it has yet to be tested. However, the occlusal surface wear is useful for age estimation in a population and provides a record of shifting masticatory forces during growth.     

Human tooth wear, tooth function and cultural variability

Among primitive peoples dental attrition appears to be a natural phenomenon. Often the degrees and kinds of tooth wear vary from population to population. This variability is possibly related to certain material aspects of culture such as diet, food preparation techniques and tool usage. In order to learn more about these relationships, extensive cross cultural comparisons must be made. This paper reports on a study of dental attrition among skeletal remains of North American Indians from three areas: California, the Southwest and the Valley of Mexico. A method of comparing worn teeth of these populations was devised so several characteristics of the teeth and supporting bone could be examined by population. This study showed significant differences in type and degree of wear among the three groups as well as differences between sexes within each population. A positive correlation between tooth wear and cultural factors was found. Dietary specialization and division of labor appear to be responsible for the degree and type of wear found in this sample. Further studies of this type are planned to expand the sample size and, if the new data support these correlations, valuable information about human–environmental relationships can be gained.     

Principal axis analysis of dental attrition data from two Australian Aboriginal populations

Dental attrition scores from two distinct Australian Aboriginal populations were compared by principal axis analysis. The first group was composed of members of the Narrinyeri group who occupied the river basin and mouth of the River Murray. The second group consisted of members of the Kaurna tribe who occupied the coastal plain to the west of the Narrinyeri. The groups were isolated both physically and culturally and as a result differences in patterns of tooth wear might be expected. In the Narrinyeri sample, attrition tended to be more rapid in females for all but the anterior teeth. The only sex difference in the Kaurna was for the maxillary central incisors, which wore more rapidly in females. Interpopulation differences in the pattern of tooth wear were also evident. The incisors, canines, and premolars of Kaurna subjects tended to wear more rapidly, while the rate of posterior tooth wear tended to be greater in the Narrinyeri. The application of the principal axis method to quantitative attrition data provided a sensitive, objective evaluation of tooth wear. The reasons for the observed differences between the two groups are still not completely clear but may relect both functional and morphological differences between groups.     

Tooth dislocation: the relationship with tooth wear and dental abscesses

Tooth dislocation (tilting) was recorded in 1,200 skulls from 34 museum collections. The findings of dislocation by tooth type, tooth wear, and abscess location are presented. A model for dislocation based upon the progressive loss of tooth support provides a rational explanation for the phenomenon. Physiological continuous tooth eruption was considered to account for a component of the progressive loss of tooth attachment. The process of attrition, pulp perforation, and dental abscess cavity formation resulted in further, more severe loss of tooth support. Heavy functional forces, in association with greatly reduced bone support, tilted the crown lingually and root buccally. When the tooth had tilted to such an extent that the root apices protruded from the bone and, presumably (in life) through the gingival/mucosal tissues, the infected root canals were effectively isolated from the internal environment. The tooth continued to function. The more typical consequence of severe attrition and dental abscess formation was tooth loss; it also isolated an infected tooth from living tissue, but without the benefit of retaining function.     

Cercopithecoid canine tooth honing mechanisms

The form of the unworn male Cercopithecoid maxillary canine tooth (C') is effectively adapted for stabbing and slashing. Its essential features are maintained by wear against the mandibular canine (C₁) and first premolar (P₃) teeth. The cusp tip of C₁ is sharpened by reciprocal wear against C'. The distribution of apposing wear facets indicates that functional attrition results from honing activity largely distinct from mastication. Functional attrition also occurs in reduced form in females and is produced within the masticatory excursive range. The significance of the “sectorial” form of P₃ is analyzed. Its elongated mesiobuccal surface serves the dual purpose of honing the distal cutting edge of C' and functioning as a cutting block against which vegetation is stabilized and shredded by the cervical third of the distal cutting edge of C'. Behavioral aspects of honing are correlated with field observations linking tooth grinding with aggression, tension release, and communication. Parallel human behavior is cited and the suggestion is made that human tooth grinding with its highly charged emotional overtones is largely relict behavior that once had high survival value in a canine tooth honing context.     

Sex differences in tooth wear ofMacaca fuscata,the Arashiyama-A troop in Texas

The incidence of tooth wear was studied in a wild troop ofM. fuscata, that had previously been transplanted from Arashiyama, Japan, to Texas. This study was undertaken to determine differences of attrition between males and females, and between maxillary and mandibular dentitions. Contrary to other findings, the rate of wear was not found to be an expression of sex difference, but seemed rather related to function. The following observations may suffice as examples: The mandibular third premolars function as a honing surface for the maxillary canines, and experience greater wear over time in males due to their proximity to smaller canines which leave their neighbors more vulnerable to wear. The degree of attrition intensity is neither the same for males and females, nor the maxillary and mandibular dentitions. Certain maxillary and mandibular teeth “pair up”; although all “pairs” are identical in males and females, they rank differently in the degree of wear experienced. Overall, females express greater attrition in the maxillary, and males in the mandibular dentitions.     

Analysis of dental attrition and mortality in the Medieval village of Tirup, Denmark

New directions and new questions raised in the study of health in the past justify this reanalysis of the pattern of dental attrition in the Medieval Danish population of Tirup. Dental attrition was scored on all permanent molars from the Tirup skeletal sample. Scores were analyzed by means of logistic regression of the probability of having entered a given stage of wear for a given tooth in a way that is very similar to transition analysis. The primary determinant of dental attrition was age at death. In addition to age, the effects of sex, side, and dating were analyzed. In order to assess the homogeneity of the process of wearing teeth down, a third-order polynomial in age-at-death was also fitted to the transition probabilities. It was found that age is the single most important determinant of dental attrition, and that sex or side did not differentiate the rate of attrition. In several transitions, there was evidence of heterogeneity, indicating both random and systematic interpersonal differences in the rate of attrition and an association between the rate of attrition and age-at-death. It was found that attrition proceeded more quickly after AD 1300 than prior to that date. It is suggested that this was due to a possible general deterioration of living conditions in Northern Europe and an increased reliance on grain for food during the first half of the 14th century. The temporal effect on attrition rate accounts for some but not all the observed heterogeneity wear.     

Relationships between age and dental attrition in Australian aboriginals

Tooth wear scores (ratios of exposed dentin to total crown area) were calculated from dental casts of Australian Aboriginal subjects of known age from three populations. Linear regression equations relating attrition scores to age were derived. The slope of the regression line reflects the rate of tooth wear, and the intercept is related to the timing of first exposure of dentin. Differences in morphology between anterior and posterior teeth are reflected in a linear relationship between attrition scores and age for anterior teeth but a logarithmic relationship for posterior teeth. Correlations between age and attrition range from less than 0.40 for third molars (where differences in the eruption and occlusion of the teeth resulted in different patterns of wear) to greater than 0.80 for the premolars and first molars. Because of the generally high correlations between age and attrition, it is possible to estimate age from the extent of tooth wear with confidence limits of the order of +/- 10 years.     

Dental pathologies in ten free-ranging chimpanzees from Gombe National Park, Tanzania

The dental remains of ten adult chimpanzees from Gombe National Park, Tanzania, were examined for enamel attrition, caries, abscesses, periodontal disease, and tooth loss. Age was the underlying factor in the development of dental pathology, in that enamel wear was present to some extent in all ten but was uniformly severe only in the three for whom estimated age at death was 39-43 years. In turn, enamel wear appears to have been the direct cause of abscess development, periodontal disease, and tooth loss. Periodontal disease was commonly expressed as alveolar resorption, particularly around the premolars and molars. This involvement was variable in all except the two youngest. Some interesting wear patterns were evident in the form of deep grooves in the upper incisors and dramatic notching of the lower canines. These patterns, and enamel attrition in general, were attributed to normal mastication and to various stripping activities. Only one carious lesion was observed, in a male with an estimated age of 26 years. An accurate assessment of the actual prevalence of caries was obscured by enamel wear and tooth loss in the older individuals.     

Age determination and body growth of the Common duiker Sylvicapra grimmia(Mammalia)

Age determination in the Common duiker Sylvicapra grimmia was investigated by analysis of tooth eruption and replacement sequence, incremental lines of tooth cementum and tooth wear in a unique collection of 48 known-age skulls, and also by analysis by post-natal body growth in known-age duiker. In both the mandible and maxilla, permanent molariform teeth were fully erupted and in wear by 26 months of age. There was little variation in the age of eruption and replacement of all molariform teeth, making this a particularly useful feature of the duiker for age determination purposes. In contrast, the variability in eruption of the incisiforms, coupled with the difficulty in distinguishing deciduous incisiforms from the permanent counterparts, placed an unexpected limitation on the use of these teeth. Although the apparent linear relationship between tooth attrition and age has potential for further investigation as an age determination technique, the cementum annuli were not correlated with chronological age. Theoretical Von Bertalanffy equations were used to analyse body growth with age. It was concluded that because the asymptote of growth was reached at such an early age, and because there is so much individual variation in growth, body growth, including horn growth, is of very limited value for age determination. Female duiker were significantly larger than males.     

Wear pattern and functional morphology of dryolestoid molars (Mammalia, Cladotheria)

Pretribosphenic dryolestoid molars are characterized by a reversed triangular alignment of the “primary trigon” (formed by the paracone, metacone and stylocone) and trigonid crucial for the embrasure shearing process. These molars are abraded along the protocristid and paracristid, and show a typical wear pattern with mesially and distally sloping dentine fields due to their thin enamel. The wear pattern of lipotyphlan and didelphid tribosphenic molars with considerably thicker enamel does not show this sloping. In dryolestoid molars two directions of striations occur. Steeper striations oriented linguo-buccally are present on facet 1 below the protocristid, and about 10° less inclined striations of the same direction have been observed near the talonid base. This reflects the railing function of the hypoflexid for the paracone of the corresponding upper molar. Facet 3 in the hypoflexid gets steeper with progressive wear, whereas facets 1 and 2 on the mesial and distal sides of the trigonid are flattened during wear. In the masticatory process the hypoflexid has mainly a shearing function with a crushing component because of its lesser inclination than the functional shearing surfaces below the trigonid crests. Striations on the exposed dentine field along the paracristid and in the guiding groove of facet 3 indicate that these two surfaces were formed by attrition (tooth to tooth contact). The exposed dentine fields at the cusp apices and along the protocristid are gauged and therefore must be a result of abrasion (tooth to food contact).     

Continuous tooth eruption in Australian aboriginal skulls

Increases in the distance from the cemento-enamel junction to the alveolar crest (CEJ-AC) have often been attributed to senile atrophy of the bone or to the effects of periodontitis, without reference to the condition of the alveolar crest. This study investigated the relationship between CEJ-AC distance, tooth wear, gender, site of the CEJ-AC measurements, and age in 161 pre-white-contact Australian aboriginal skulls. Individual teeth were included in the study when there was no evidence of dehiscence, periodontitis, or abscess cavity formation in the supporting alveolar bone. The CEJ-AC distances increased as the severity of attrition increased; in male skulls, CEJ-AC distances were greater than in female skulls for all categories of tooth wear. In general, CEJ-AC distances measured on the mesial aspects of teeth were greater than those recorded distally; lingual distances generally exceeded buccal recordings. The best explanation of these findings and similar reports in the anthropological literature is that continuous tooth eruption occurred without the concomitant coronal movement of alveolar bone. This conclusion has significant ramifications for anthropological, epidemiological, and clinical studies which use the CEJ and AC as reference points when measuring periodontal attachment loss (periodontitis).     

Dentition and age determination of the giraffe Giraffa camelopardalis

Thirteen tooth eruption stages and their corresponding chronological ages are descri bed from a series of giraffe jaws. These can be used for age determination in giraffes with immature dentition. Significant correlations of the lingual crown height ( r =0-957; P < 0001) and lingual occlusal surface width ( r =0-959; P < 0001) with the number of dark staining incremental lines in the cementum of thin decalcified sections of the maxillary first molar were found. The regression equations derived from these relationships provide a further method for determining the age of a giraffe. A composite plate showing maxillary first molar wear patterns provides a means of roughly assigning an age to a particular specimen. Thin sections of undecalcified teeth, mandible measurements, various other indices of tooth wear and eye lens mass were investigated and found unsuitable for age determination in this     

新疆罗布泊小河墓地居民的口腔健康与饮食

小河墓地是新疆罗布泊地区一处重要的早期青铜时代墓地。本文主要对该墓地出土颅骨所附牙齿的磨耗程度及牙结石沉积状况进行了观察、量化统计和分析,同时也对该人群其他的口腔疾病如根尖脓肿、颞下颌关节病变、生前牙齿脱落等做了简单的统计,以期从古病理学的角度获取当时居民的口腔健康、食物类型和饮食习惯等信息。本研究发现:1)小河人群的牙齿磨耗程度远远高于对比组的古代居民,其上腭圆枕及颞下颌关节炎出现率较高,存在牙齿崩裂现象,且其前后部牙齿磨耗差异不大。这一方面说明其食物加工技术比较落后,食物粗糙坚硬;另一方面小河居民的经济生活方式和食物构成都比较复杂,不同的食物对前部和后部牙齿磨耗的程度造成了不同的影响;此外,小河人群风沙肆虐的生活环境也对其严重牙齿磨耗的形成产生了一定影响。2)小河人群异常严重的牙结石沉积归功于其高蛋白质和碳水化合物的饮食,以及生活用水的水质。3)统计分析发现两性存在上、下颌犬齿的磨耗差异,而这一情况可能暗示了在家庭手工业方面存在男女分工的现象。     

Lemur habitat and dental senescence in Ranomafana National Park, Madagascar

Not only can teeth provide clues about diet, but they also can be indicators of habitat quality. Conspecific groups living in different habitats with different kinds of foods may exhibit different rates of dental attrition because their teeth are less well adapted to some foods than to others. Ecological disequilibrium describes the situation in which animals live in habitats to which they are relatively poorly adapted. We test whether dental senescence, the wear-related decrease in dental functionality that is associated with decreased survival of infants born to older Propithecus edwardsi females, can be explained by ecological disequilibrium. Specifically, we compare the rates of dental wear in sifaka groups living in nearby habitats that differ in the degree of anthropogenically induced disturbance. We hypothesize that sifakas living in disturbed areas have an unusual rate of tooth wear compared to those living in a more pristine area, and that dental senescence is a consequence of an atypically high wear rate in a degraded habitat. To test whether habitat quality affects tooth wear more generally, we compare rates of use-wear in two subsets of Microcebus rufus living in either relatively undisturbed or disturbed habitats. Contrary to our predictions, we did not detect different rates of tooth wear in disturbed versus undisturbed habitats for either species and consider that reproductively detrimental dental senescence in P. edwardsi females is unlikely to be a pathological consequence of ecological disequilibrium.     

Relationship of Tooth Wear to Chronological Age among Indigenous Amazon Populations

In indigenous populations, age can be estimated based on family structure and physical examination. However, the accuracy of such methods is questionable. The aim of this cross-sectional study was to evaluate occlusal tooth wear related to estimated age in the remote indigenous populations of the Xingu River, Amazon. Two hundred and twenty three semi-isolated indigenous subjects with permanent dentition from the Arara (n = 117), Xicrin-Kayapó (n = 60) and Assurini (n = 46) villages were examined. The control group consisted of 40 non-indigenous individuals living in an urban area in the Amazon basin (Belem). A modified tooth wear index was applied and then associated with chronological age by linear regression analysis. A strong association was found between tooth wear and chronological age in the indigenous populations (p <0.001). Tooth wear measurements were able to explain 86% of the variation in the ages of the Arara sample, 70% of the Xicrin-Kaiapó sample and 65% of the Assurini sample. In the urban control sample, only 12% of ages could be determined by tooth wear. These findings suggest that tooth wear is a poor estimator of chronological age in the urban population; however, it has a strong association with age for the more remote indigenous populations. Consequently, these findings suggest that a simple tooth wear evaluation method, as described and applied in this study, can be used to provide a straightforward and efficient means to assist in age determination of newly contacted indigenous groups.     

Relationships between attrition and lingual tilting in human teeth

Associations between occlusal dental attrition and the lingual tilting of human teeth were investigated in two aboriginal California populations. A literature survey suggests lingual tilting is related geographically and temporally to the helicoidal occlusal plane in humans; if true, lingual tilting should be expected throughout the Homo osteological record. Buccal alveolar abscesses, exposed pulp chambers, extent of tooth attrition, angle of lingual tilt, and amount of overjet were observed for lingually tilted teeth. These attributes were analyzed statistically, leading to a conclusion that lingual tilting is slight and infrequent unless tooth attrition is pronounced. It is suggested that lingual tilting is due in part to masticatory stress. A feedback model considers lingual tilting as one conspicuous manifestation of a more complex “severe attrition syndrome,” the initial stimulus for which may derive from heavy occlusal tooth wear. Untested possibilities should be examined–e.g., age-related changes, the impact of the helicoidal occlusal plane, and the role of masticatory forces.     

Age estimation of the White rhinoceros (Ceratotherium simum)

Age estimation criteria for the southern White rhinoceros ( Ceratotherium simum simum ) are presented both for free-ranging live animals and for cranial material. These are based on: (i) size appearance and horn development of live animals; (ii) stages of tooth eruption; (iii) tooth wear classes; (iv) attrition in height of the first molar tooth; (v) counts of cementum lines visible in tooth sections. Selected measurements are presented for live animals, skulls and horns.
For live animals, eight size classes are distinguished, seven of these covering immature animals up to ten years of age. Sixteen tooth wear classes are established, based on eruption and surface wear of maxillary dentition. Chronological ages were assigned from individually known animals followed in the field, and from skulls from animals for which exact records of age were available, or which could be assigned to an age category from appearance at death. Cementum line counts corresponded approximately with age in years, despite difficulties in interpreting lines. Some variability was observed, possibly related to nutritional conditions.
The maximum cementum line count obtained indicates a longevity of at least 40 years. Full body weight and socio-sexual maturity are attained by males between 10 and 15 years of age, while females first give birth between six and eight years of age. Sequences and times of tooth eruption are similar to those reported for the Black rhinoceros ( Diceros bicornis ).
Comparative cranial and body measurements are presented for the northern subspecies ( Ceratotherium simum cottoni ).