共查询到20条相似文献，搜索用时 46 毫秒
1.
Purpose
This study aimed to calculate the flexion-extension axis (FEA) of the knee through in-vivo knee kinematics data, and then compare it with two major anatomical axes of the femoral condyles: the transepicondylar axis (TEA) defined by connecting the medial sulcus and lateral prominence, and the cylinder axis (CA) defined by connecting the centers of posterior condyles.Methods
The knee kinematics data of 20 healthy subjects were acquired under weight-bearing condition using bi-planar x-ray imaging and 3D-2D registration techniques. By tracking the vertical coordinate change of all points on the surface of femur during knee flexion, the FEA was determined as the line connecting the points with the least vertical shift in the medial and lateral condyles respectively. Angular deviation and distance among the TEA, CA and FEA were measured.Results
The TEA-FEA angular deviation was significantly larger than that of the CA-FEA in 3D and transverse plane (3.45° vs. 1.98°, p < 0.001; 2.72° vs. 1.19°, p = 0.002), but not in the coronal plane (1.61° vs. 0.83°, p = 0.076). The TEA-FEA distance was significantly greater than that of the CA-FEA in the medial side (6.7 mm vs. 1.9 mm, p < 0.001), but not in the lateral side (3.2 mm vs. 2.0 mm, p = 0.16).Conclusion
The CA is closer to the FEA compared with the TEA; it can better serve as an anatomical surrogate for the functional knee axis. 相似文献2.
Introduction
Children with cleft lip and palate (CLP) are known to have airway problems. Previous studies have shown that individuals with CLP have a 30% reduction in nasal airway size compared to non-cleft controls. No reports have been found on cross-sectional area and volume of the pharyngeal airway in clefts. Introduction of Cone-Beam CT (CBCT) and imaging software has facilitated generation of 3D images for assessment of the cross-sectional area and volume of the airway.Objective
To assess the pharyngeal airway in individuals with CLP using CBCT by measuring volume and smallest cross-sectional areas and compare with 19 age- and sex-matched non-cleft controls.Methods
Retrospective study of CBCT data of pre-adolescent individuals (N = 19, Mean age = 10.6, 7 females, 12 males, UCLP = 6, BCLP = 3) from the Center for Craniofacial Anomalies. Volumetric analysis was performed using image segmentation features in CB Works 3.0. Volume and smallest cross-sectional were studied in both groups. Seven measurements were repeated to verify reliability using Pearson correlation coefficient. Volume and cross-sectional area differences were analyzed using paired t-tests.Results
The method was found to be reliable. Individuals with CLP did not exhibit smaller total airway volume and cross sectional area than non-CLP controls.Conclusion
3D imaging using CBCT and CB Works is reliable for assessing airway volume. Previous studies have shown that the nasal airway is restricted in individuals with CLP. In our study, we found that the pharyngeal airway is not compromised in these individuals. 相似文献3.
Objective
To present and validate a semi-automatic segmentation protocol to enable an accurate 3D reconstruction of the mandibular condyles using cone beam computed tomography (CBCT).Materials and Methods
Approval from the regional medical ethics review board was obtained for this study. Bilateral mandibular condyles in ten CBCT datasets of patients were segmented using the currently proposed semi-automatic segmentation protocol. This segmentation protocol combined 3D region-growing and local thresholding algorithms. The segmentation of a total of twenty condyles was performed by two observers. The Dice-coefficient and distance map calculations were used to evaluate the accuracy and reproducibility of the segmented and 3D rendered condyles.Results
The mean inter-observer Dice-coefficient was 0.98 (range [0.95–0.99]). An average 90th percentile distance of 0.32 mm was found, indicating an excellent inter-observer similarity of the segmented and 3D rendered condyles. No systematic errors were observed in the currently proposed segmentation protocol.Conclusion
The novel semi-automated segmentation protocol is an accurate and reproducible tool to segment and render condyles in 3D. The implementation of this protocol in the clinical practice allows the CBCT to be used as an imaging modality for the quantitative analysis of condylar morphology. 相似文献4.
Objectives
1) To determine the accuracy and reliability of an automated anthropometric measurement software for the oropharyngeal airway and 2) To compare the anthropometric dimensions of the oropharyngeal airway in skeletal class II and III deformity patients.Methods
Cone-beam CT (CBCT) scans of 62 patients with skeletal class II or III deformities were used for this study. Volumetric, linear and surface area measurements retroglossal (RG) and retropalatal (RP) compartments of the oropharyngeal airway was measured with the 3dMDVultus software. Accuracy of automated anthropometric pharyngeal airway measurements was assessed using an airway phantom.Results
The software was found to be reasonably accurate for measuring dimensions of air passages. The total oropharyngeal volume was significantly greater in the skeletal class III deformity group (16.7 ± 9.04 mm3) compared with class II subjects (11.87 ± 4.01 mm3). The average surface area of both the RG and RP compartments were significantly larger in the class III deformity group. The most constricted area in the RG and RP airway was significantly larger in individuals with skeletal class III deformity. The anterior-posterior (AP) length of this constriction was significantly greater in skeletal class III individuals in both compartments, whereas the width of the constriction was not significantly different between the two groups in both compartments. The RP compartment was larger but less uniform than the RG compartment in both skeletal deformities.Conclusion
Significant differences were observed in morphological characteristics of the oropharyngeal airway in individuals with skeletal class II and III deformities. This information may be valuable for surgeons in orthognathic treatment planning, especially for mandibular setback surgery that might compromise the oropharyngeal patency. 相似文献5.
Purpose
This study evaluated the differences in the facial morphological characteristics of female patients exhibiting skeletal class II deformity with and without temporomandibular joint osteoarthrosis.Methods
Eighty-three female patients with skeletal class II deformity were included in this study; these patients were classified into three groups on the basis of the condylar features shown in cone-beam computed tomography scans: normal group, indeterminate for osteoarthrosis group, and osteoarthrosis group. The cephalometric differences among the three groups were evaluated through one-way ANOVA.Results
Of the 83 patients, 52.4% were diagnosed with osteoarthrosis, as indicated by the changes in the condylar osseous component. The cephalometric measurements that represented skeletal characteristics, including mandibular position relative to the cranial base, mandibular plane angle (MP-SN), posterior facial height (S-Go), and facial height ratio, were significantly different among the three groups (p < 0.05). The patients in the osteoarthrosis group yielded the smallest S-Go, the highest MP-SN, and the most retruded mandible.Conclusions
Temporomandibular joint osteoarthrosis is commonly observed in female patients with skeletal class II deformity. The morphological characteristics of the facial skeleton in patients with bilateral condylar osteoarthrosis may be altered. 相似文献6.
Daniel Lonic Betty Chien-Jung Pai Kazuaki Yamaguchi Peerasak Chortrakarnkij Hsiu-Hsia Lin Lun-Jou Lo 《PloS one》2016,11(3)
Background
Although conventional two-dimensional (2D) methods for orthognathic surgery planning are still popular, the use of three-dimensional (3D) simulation is steadily increasing. In facial asymmetry cases such as in cleft lip/palate patients, the additional information can dramatically improve planning accuracy and outcome. The purpose of this study is to investigate which parameters are changed most frequently in transferring a traditional 2D plan to 3D simulation, and what planning parameters can be better adjusted by this method.Patients and Methods
This prospective study enrolled 30 consecutive patients with cleft lip and/or cleft palate (mean age 18.6±2.9 years, range 15 to 32 years). All patients received two-jaw single-splint orthognathic surgery. 2D orthodontic surgery plans were transferred into a 3D setting. Severe bony collisions in the ramus area after 2D plan transfer were noted. The position of the maxillo-mandibular complex was evaluated and eventually adjusted. Position changes of roll, midline, pitch, yaw, genioplasty and their frequency within the patient group were recorded as an alternation of the initial 2D plan. Patients were divided in groups of no change from the original 2D plan and changes in one, two, three and four of the aforementioned parameters as well as subgroups of unilateral, bilateral cleft lip/palate and isolated cleft palate cases. Postoperative OQLQ scores were obtained for 20 patients who finished orthodontic treatment.Results
83.3% of 2D plans were modified, mostly concerning yaw (63.3%) and midline (36.7%) adjustments. Yaw adjustments had the highest mean values in total and in all subgroups. Severe bony collisions as a result of 2D planning were seen in 46.7% of patients. Possible asymmetry was regularly foreseen and corrected in the 3D simulation.Conclusion
Based on our findings, 3D simulation renders important information for accurate planning in complex cleft lip/palate cases involving facial asymmetry that is regularly missed in conventional 2D planning. 相似文献7.
The Objective
The aim of the study was evaluation of metal ions (nickel and chromium) released from orthodontic appliances in cleft lip and palate patients and the usefulness of non-invasive matrices (saliva and hair).Materials and Methods
The material studied consisted of 100 individuals, including 59 females and 41 males of 5 to 16 years of age, which were divided into 3 groups: experimental–patients with cleft lip and palate (36 individuals, the average treatment time 5.74 years); control group–patients without cleft lip and palate, during orthodontic treatment (32 individuals, the average treatment time 1.78 years) and the control group patients without cleft lip and palate, without any orthodontic appliances (32 individuals). Samples (saliva, hair) were collected and subjects underwent a survey by questionnaire. Multi-elemental analyses of the composition of non-invasive matrices was conducted in an accredited laboratory by inductively coupled plasma spectrometry technique ICP-OES. The results were reported as mean contents of particular elements (Cd, Cr, Cu, Fe, Mn, Mo, Ni, Si) in hair and in saliva.Results
The concentration of Cr, Ni, Fe and Cu ions in saliva of cleft lip and palate patients were several times higher as compared with not treated orthodontically control groups and higher than in the group with orthodontic appliances. Among the assessed matrices, hair of cleft lip and palate patients seem to be not a meaningful biomarker.Conclusion
It was found that orthodontic appliances used in long-term treatment of cleft lip and palate patients do not release toxic levels of Cr and Ni ions. 相似文献8.
Introduction
Proper imaging allows practitioners to evaluate an asymptomatic tempormandibular joint (TMJ) for potential degenerative changes prior to surgical and orthodontic treatment. The recently developed cone-beam computed tomography (CBCT) allows measurement of TMJ bony structures with high accuracy. A study was undertaken to determine the morphology, and its variations, of the mandibular condyle and glenoid fossa among Malay and Chinese Malaysians.Methods
CBCT was used to assess 200 joints in 100 subjects (mean age, 30.5 years). i-CAT CBCT software and The Mimics 16.0 software were employed to measure the volume, metrical size, position of each condyle sample and the thickness of the roof of the glenoid fossa (RGF).Results
No significant gender differences were noted in thickness of the RGF and condylar length; however condylar volume, width, height and the joint spaces were significantly greater among males. With regards to comparison of both TMJs, the means of condylar volume, width and length of the right TMJ were significantly higher, while the means of the left condylar height and thickness of RGF were higher. When comparing the condylar measurements and the thickness of RGF between the two ethnic groups, we found no significant difference for all measurements with exception of condylar height, which is higher among Chinese.Conclusion
The similarity in measurements for Malays and Chinese may be due to their common origin. This information can be clinically useful in establishing the diagnostic criteria for condylar volume, metrical size, and position in the Malaysian East Asians population. 相似文献9.
Ching-Ching Yang 《PloS one》2016,11(3)
Purpose
Scatter is a very important artifact causing factor in dental cone-beam CT (CBCT), which has a major influence on the detectability of details within images. This work aimed to improve the image quality of dental CBCT through scatter correction.Methods
Scatter was estimated in the projection domain from the low frequency component of the difference between the raw CBCT projection and the projection obtained by extrapolating the model fitted to the raw projections acquired with 2 different sizes of axial field-of-view (FOV). The function for curve fitting was optimized by using Monte Carlo simulation. To validate the proposed method, an anthropomorphic phantom and a water-filled cylindrical phantom with rod inserts simulating different tissue materials were scanned using 120 kVp, 5 mA and 9-second scanning time covering an axial FOV of 4 cm and 13 cm. The detectability of the CT image was evaluated by calculating the contrast-to-noise ratio (CNR).Results
Beam hardening and cupping artifacts were observed in CBCT images without scatter correction, especially in those acquired with 13 cm FOV. These artifacts were reduced in CBCT images corrected by the proposed method, demonstrating its efficacy on scatter correction. After scatter correction, the image quality of CBCT was improved in terms of target detectability which was quantified as the CNR for rod inserts in the cylindrical phantom.Conclusions
Hopefully the calculations performed in this work can provide a route to reach a high level of diagnostic image quality for CBCT imaging used in oral and maxillofacial structures whilst ensuring patient dose as low as reasonably achievable, which may ultimately make CBCT scan a reliable and safe tool in clinical practice. 相似文献10.
Mette A. R. Kuijpers Yu-Ting Chiu Rania M. Nada Carine E. L. Carels Piotr S. Fudalej 《PloS one》2014,9(4)
Background
Current guidelines for evaluating cleft palate treatments are mostly based on two-dimensional (2D) evaluation, but three-dimensional (3D) imaging methods to assess treatment outcome are steadily rising.Objective
To identify 3D imaging methods for quantitative assessment of soft tissue and skeletal morphology in patients with cleft lip and palate.Data sources
Literature was searched using PubMed (1948–2012), EMBASE (1980–2012), Scopus (2004–2012), Web of Science (1945–2012), and the Cochrane Library. The last search was performed September 30, 2012. Reference lists were hand searched for potentially eligible studies. There was no language restriction.Study selection
We included publications using 3D imaging techniques to assess facial soft tissue or skeletal morphology in patients older than 5 years with a cleft lip with/or without cleft palate. We reviewed studies involving the facial region when at least 10 subjects in the sample size had at least one cleft type. Only primary publications were included.Data extraction
Independent extraction of data and quality assessments were performed by two observers.Results
Five hundred full text publications were retrieved, 144 met the inclusion criteria, with 63 high quality studies. There were differences in study designs, topics studied, patient characteristics, and success measurements; therefore, only a systematic review could be conducted. Main 3D-techniques that are used in cleft lip and palate patients are CT, CBCT, MRI, stereophotogrammetry, and laser surface scanning. These techniques are mainly used for soft tissue analysis, evaluation of bone grafting, and changes in the craniofacial skeleton. Digital dental casts are used to evaluate treatment and changes over time.Conclusion
Available evidence implies that 3D imaging methods can be used for documentation of CLP patients. No data are available yet showing that 3D methods are more informative than conventional 2D methods. Further research is warranted to elucidate it.Systematic review registration
International Prospective Register of Systematic Reviews, PROSPERO CRD42012002041 相似文献11.
Diffusion Tensor Magnetic Resonance Imaging of Trigeminal Nerves in Relapsing Herpetic Keratouveitis
Antoine Rousseau Gha?daa Nasser Christophe Chiquet Emmanuel Barreau Gael Gendron Godefroy Kaswin Mohamed M’Garrech Farida Benoudiba Denis Ducreux Marc Labetoulle 《PloS one》2015,10(4)
Background
Corneal hypoesthesia is the landmark of HSV and VZV keratitis and can lead to neurotrophic keratitis. Diffusion tensor imaging (DTI) is a new magnetic resonance imaging (MRI) derived technique, which offers possibilities to study axonal architecture. We aimed at assessing the potential impact of recurrent HSV or VZV-related keratitis on the axonal architecture of trigeminal nerves using DTI.Design
Prospective non-interventional study.Participants
Twelve patients and 24 controls.Methods
DTI using MRI of the trigeminal fibers and corneal esthesiometry using the Cochet-Bonnet esthesiometer were acquired for patients affected by unilateral and recurrent HSV or VZV-related keratitis (3 months after the last corneal inflammatory event), and control subjects with no history of ocular or neuronal disease affecting the trigeminal pathways.Main Outcome Measures
Fractional anisotropy (FA) and apparent diffusion coefficient (ADC) were compared between the 2 eyes of both patients and controls, and correlated with corneal esthesiometry.Results
FA was lower in the trigeminal fibers ipsilateral to the affected eye compared to the non-affected side (0.39±0.02 versus 0.46±0.04, P=0.03). This difference was more important than the intra-individual variability observed in controls. Concomitantly, the asymmetry in ADC results was significantly correlated with the loss of corneal sensitivity in the affected eye.Conclusions
Corneal hypoesthesia related to HSV and VZV keratitis is associated with persistent modifications in the architecture and functionality of the trigeminal fibers. These results add further explanation to the pathogenesis of HSV and VZV-induced neurotrophic keratitis, which may occur despite an apparent quiescence of the disease. 相似文献12.
Toru Ishikawa Satoshi Abe Asami Hoshii Yumi Yamada Akihiko Iiduka Takeo Nemoto Keiko Takeda Toshiaki Yoshida 《PloS one》2016,11(1)
Background & Aims
The amount of drug-loaded lipiodol in an HCC tumor post-transarterial chemoembolization (TACE) correlates with the risk of local tumor recurrence. Lipiodol enhancement of a tumor on conventional CT, measured in Hounsfield units (HU), can predict tumor response. Here we investigate whether cone-beam CT (CBCT) can also be used to predict tumor response, providing the benefit of being able to optimize the patient’s treatment plan intra-procedurally.Methods
A total of 82 HCC nodules (82 patients), ≤5 cm in diameter, were treated with balloon-occluded TACE using miriplatin between December 2013 and November 2014. For each patient, both CBCT and conventional CT images were obtained post-TACE. The degree of correlation between CBCT and conventional CT was determined by comparing identical regions of interest for each imaging modality using pixel values.Results
The pixel values from conventional CT and CBCT were highly correlated, with a Pearson correlation coefficient of 0.912 (p<0.001). The location of the nodules within the liver did not affect the results; the correlation coefficient was 0.891 (p<0.001) for the left lobe and 0.926 (p<0.001) for the right lobe. The mean pixel value for conventional CT was 439 ± 279 HU, and the mean pixel value for CBCT was 416 ± 311 HU.Conclusions
CBCT may be used as a substitute for conventional CT to quantitatively evaluate the amount of drug-loaded lipiodol within an HCC nodule and, hence, the efficacy of TACE treatment. The major benefit of using CBCT is the ability to predict the likelihood of local recurrence intra-procedurally, enabling subsequent treatment optimization. 相似文献13.
Xueling Chen Dongxu Liu Ju Liu Zizhong Wu Yongtao Xie Liang Li Hong Liu Tiantian Guo Chen Chen Shijie Zhang 《PloS one》2015,10(8)
Objective
The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE) treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT).Methods
Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30) was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1) and post-treatment (T2) of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated.Results
Comparing with the data from T1 group, the subspinale (A) of maxilla and the upper incisor (UI) of the T2 group were moved in the anterior direction. The gnathion (Gn) of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR) ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group.Conclusion
The PE treatment of Class Ⅲ malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx. 相似文献14.
Background
Post exertional muscle fatigue is a key feature in Chronic Fatigue Syndrome (CFS). Abnormalities of skeletal muscle function have been identified in some but not all patients with CFS. To try to limit potential confounders that might contribute to this clinical heterogeneity, we developed a novel in vitro system that allows comparison of AMP kinase (AMPK) activation and metabolic responses to exercise in cultured skeletal muscle cells from CFS patients and control subjects.Methods
Skeletal muscle cell cultures were established from 10 subjects with CFS and 7 age-matched controls, subjected to electrical pulse stimulation (EPS) for up to 24h and examined for changes associated with exercise.Results
In the basal state, CFS cultures showed increased myogenin expression but decreased IL6 secretion during differentiation compared with control cultures. Control cultures subjected to 16h EPS showed a significant increase in both AMPK phosphorylation and glucose uptake compared with unstimulated cells. In contrast, CFS cultures showed no increase in AMPK phosphorylation or glucose uptake after 16h EPS. However, glucose uptake remained responsive to insulin in the CFS cells pointing to an exercise-related defect. IL6 secretion in response to EPS was significantly reduced in CFS compared with control cultures at all time points measured.Conclusion
EPS is an effective model for eliciting muscle contraction and the metabolic changes associated with exercise in cultured skeletal muscle cells. We found four main differences in cultured skeletal muscle cells from subjects with CFS; increased myogenin expression in the basal state, impaired activation of AMPK, impaired stimulation of glucose uptake and diminished release of IL6. The retention of these differences in cultured muscle cells from CFS subjects points to a genetic/epigenetic mechanism, and provides a system to identify novel therapeutic targets. 相似文献15.
Tae Hyuk Kim Ji Young Joung Mira Kang Sun Kyu Choi Kyunga Kim Ju Young Jang Yoon Young Cho Yong-Ki Min Jae Hoon Chung Sun Wook Kim 《PloS one》2015,10(12)
Background
The independent skeletal effect of thyrotropin (thyroid stimulating hormone, TSH) has been suggested in animal studies. However, clinical data on the association between bone loss and variations in TSH levels is inconsistent. This study aimed to investigate the relationship between TSH levels and bone mineral density (BMD).Methods
We conducted a cross-sectional study with 37,431 subjects (33,052 cases with euthyroidism and 4,379 cases with subclinical thyroid dysfunction) aged over 35 years. We performed thyroid function tests and measured BMD at the lumbar spine, femur neck, and total hip.Results
Levels of TSH and T3 were positively correlated in women (r = 0.076, P = 0.001) and uncorrelated in men. In both men and women, TSH levels correlated positively and T3 levels correlated negatively with BMD at all skeletal sites in age and body mass index adjusted analyses. BMD increased steadily with TSH levels from the subclinical hyperthyroid to subclinical hypothyroid range in subjects with T3 levels in the highest tertile (119.5–200.0 ng/dL), but was no longer significant in subjects with lower plasma T3 levels.Conclusions
The variations in TSH levels within the euthyroid and subclinical range were positively correlated with BMD in healthy men and women. The negative effect of T3 on BMD appears to be compensated for by increased TSH in subjects with plasma T3 levels in the upper normal range. 相似文献16.
Seok Jong Chung Eunjeong Park Byoung Seok Ye Hye Sun Lee Hyuk-Jae Chang Dongbeom Song Young Dae Kim Ji Hoe Heo Hyo Suk Nam 《PloS one》2016,11(1)
Background
Patients with unilateral neglect fail to respond normally to stimuli on the left side. To facilitate the evaluation of unilateral spatial neglect, we developed a new application that runs on a tablet device and investigated its feasibility in stroke patients.Methods
We made the computerized table setting test (CTST) to run on the tablet computer. Forty acute ischemic stroke patients (20 patients with right hemispheric infarction with neglect, 10 patients with right hemispheric infarction without neglect, and 10 patients with left hemispheric infarction) and 10 healthy controls were prospectively enrolled to validate the CTST. The test requires subjects to set a table by dragging 12 dishes located below the table on the tablet screen. The horizontal deviation of the 12 dishes from the midline of the table, the selection tendency measured by the sequence of the dish selection, and the elapsed time for table setting were calculated automatically.Results
Parameters measured by the CTST were correlated with the results of conventional neglect tests. The horizontal deviation was significantly higher in patients with right hemispheric infarction with neglect compared with the other groups. The selection tendency and elapsed time also were significantly different in patients with right hemispheric infarction with neglect compared with the left hemispheric infarction and control groups, but were similar to those with right hemispheric infarction without neglect.Conclusions
The CTST is feasible to administer and comparable with conventional neglect tests. This new application may be useful for the initial diagnosis and follow-up of neglect patients. 相似文献17.
Giuseppe Frazzitta Davide Ferrazzoli Roberto Maestri Roberta Rovescala Gabriele Guaglio Rossana Bera Daniele Volpe Gianni Pezzoli 《PloS one》2015,10(3)
Background
Muscular weakness is a frequent cause of instability that contributes to falls in Parkinson’s disease (PD). Isokinetic dynamometry is a method of muscle assessment useful to measure the muscular strength giving a quantification of the weakness, but only few studies about isokinetic assessment were performed in PD. The aims of the study were to evaluate the muscle strength in PD and to investigate the differences in patients affected on the right and left side.Methods
Knee flexor and extensor muscles strength was assessed using an isokinetic dynamometer in 25 patients in stage 3 H&Y and in 15 healthy controls. Subjects were tested in both legs at three fixed angular velocities: 90°/s, 120°/s, 180°/s.Results
Considering the whole population of Parkinsonians, no difference in strength was observed with respect to controls. Considering the side, patients affected on the right side showed a clear tendency to be weaker than patients affected on the left side and controls.Conclusions
PD patients affected on the right side, but not those affected on the left side, had a reduction in muscle strength as compared to controls. We postulate a central origin deficit in muscle strength in PD. It is known that dopamine transporter binding is more severely reduced in the left posterior putamen and our results suggest that the control of the muscle strength in PD is linked to the right–left hemispheric asymmetry of the functional organization of basal ganglia and with their connections to cortical motor and pre-motor areas. 相似文献18.
Tianhu Wang Zhenhua Yang Fang Yang Mingye Zhang Jinlong Zhao Jinwu Chen Yongming Li 《PloS one》2014,9(4)
Objective
The study was performed to compare the 3D pharyngeal airway dimensions in adult skeletal Class II patients with different vertical growth patterns (low, normal, and high angle) and to investigate whether the upper airway dimensions of untreated skeletal Class II adults were affected by vertical skeletal variables.Methods
Cone-beam computed tomography (CBCT) records of 64 untreated adult skeletal Class II patients (34 male and 30 female) were collected to evaluate the pharyngeal airway dimensions. Subjects were divided into three subgroups according to the GoGn-SN angle (low angle, normal angle or high angle). All subgroups were matched for sex. ANOVA and SNK - q tests were used to identify differences within and among groups (p<0.05). Coefficient of product-moment correlation (Pearson correlation coefficient) was used to analyze the association between pharyngeal airway dimensions and vertical growth patterns.Results
The results showed that pharyngeal airway measurements were statistically significantly less (p<0.05) in high angle group as compared to normal angle or low angle group.Conclusions
Adult skeletal Class II subjects with vertical growth patterns have significantly narrower pharyngeal airways than those with normal or horizontal growth patterns, confirming an association between pharyngeal airway measurements and a vertical skeletal pattern. 相似文献19.
Junhua Wu Wei Wang Yang Liu Jing Sun Yan Ye Bingyun Li Xiaona Liu Hongxu Liu Zhenqi Sun Mang Li Jing Cui Dianjun Sun Yanmei Yang Yanhui Gao 《PloS one》2015,10(6)
Background
Brick tea type fluorosis is a public health concern in the north-west area of China. The association between SNPs of genes influencing bone mass and fluorosis has attracted attention, but the association of SNPs with the risk of brick-tea type of fluorosis has not been reported.Objective
To investigate the modifying roles of GSTP1 rs1695 polymorphisms on this association.Methods
A cross-sectional study was conducted. Brick-tea water was tested by the standard of GB1996-2005 (China). Urinary fluoride was tested by the standard of WS/T 89-2006 (China). Skeletal fluorosis was diagnosed by X-ray, the part we scheduled was forearm, shank, and pelvic, then diagnosed the skeletal fluorosis by the standard of WS/192-2008 (China). Gene polymorphism was tested by Sequenom MassARRAY system.Result
The prevalence rate in different ethnical participants was different: Tibetan individuals had the highest prevalence rate of skeletal fluorosis. There were significant differences in genotype frequencies of GSTP1 Rs1695 among different ethnical participants (p<0.001): Tibetan, Mongolian and Han subjects with homozygous wild type (GSTP1-AA) genotype were numerically higher than Kazakh and Russian subjects (p<0.001). Compared to Tibetan participants who carried homozygous A allele of GSTP1 Rs1695, Tibetan participants who carried G allele had a significantly decreased risk of skeletal fluorosis (OR = 0.558 [95% CI, 0.326-0.955]). For Kazakh participants, a decreased risk of skeletal fluorosis among carriers of the G allele was limited to non high-loaded fluoride status (OR = 0. 166 [95% CI, 0.035–0.780] vs. OR = 1.478 [95% CI, 0.866–2.552] in participants with high-loaded fluoride status). Neither SNP-IF nor SNP-age for GSTP1 Rs1695 was observed.Conclusion
The prevalence rate of the brick tea type fluorosis might have ethnic difference. For Tibetan individuals, who had the highest prevalence rate, G allele of GSTP1 Rs1695 might be a protective factor for brick tea type skeletal fluorosis. 相似文献20.
Yuji Miyamoto Yoshifumi Baba Yasuo Sakamoto Mayuko Ohuchi Ryuma Tokunaga Junji Kurashige Yukiharu Hiyoshi Shiro Iwagami Naoya Yoshida Masayuki Watanabe Hideo Baba 《PloS one》2015,10(6)