Does the aquatic invertebrate nipple array prevent bubble adhesion? An experiment using nanopillar sheets

The nipple array is a submicrometre-scale structure found on the cuticle surfaces of various invertebrate taxa. Corneal nipples are an antiglare surface in nocturnal insects, but the functional significance of the nipple array has not been experimentally investigated for aquatic organisms. Using nanopillar sheets as a mimetic model of the nipple array, we demonstrated that significantly fewer bubbles adhered to the nanopillar surface versus a flat surface when the sheets were hydrophilic. Many more bubbles adhered to the hydrophobic surface than the hydrophilic surfaces. Bubbles on the body surface may cause buoyancy problems, movement interference and water flow occlusion. Here, bubble repellence is proposed as a function of the hydrophilic nipple array in aquatic invertebrates and its properties are considered based on bubble adhesion energy.     

Wettability of substrata controls cell-substrate and cell-cell adhesions

The maintenance of endothelial cell (EC) monolayer architecture requires stable adhesions not only between neighboring cells but also between cells and the extracellular matrix. While the influence of biomaterials surface wettability on cell-substratum adhesion is rather well studied, its impact on cell-cell cohesion has not been extensively investigated. In the present study a model system consisting of hydrophilic and hydrophobic glass pre-coated with fibronectin and fibrinogen was used to study the influence of surface wettability on both types of cell adhesions. It was demonstrated that the substrate wettability controls the adhesion and cytoskeletal organization of endothelial cells, which has an impact on the subsequent ability of cells to establish stable cell-cell cohesions. These effects were related to the accessibility of specific domains of the adsorbed proteins. While the hydrophobic substratum promoted cell-cell cohesion, on hydrophilic substrata cell-substrate adhesion was dominant. In addition, evidence for an influence of surface wettability on the cross talk between integrins and cadherins was found.     

Vascular smooth muscle cells on polyelectrolyte multilayers: hydrophobicity-directed adhesion and growth

Polyelectrolyte multilayer films were employed to support attachment of cultured rat aortic smooth muscle A7r5 cells. Like smooth muscle cells in vivo, cultured A7r5 cells are capable of converting between a nonmotile "contractile" phenotype and a motile "synthetic" phenotype. Polyelectrolyte films were designed to examine the effect of surface charge and hydrophobicity on cell adhesion, morphology, and motility. The hydrophobic nature and surface charge of different polyelectrolyte films significantly affected A7r5 cell attachment and spreading. In general, hydrophobic polyelectrolyte film surfaces, regardless of formal charge, were found to be more cytophilic than hydrophilic surfaces. On the most hydrophobic surfaces, the A7r5 cells adhered, spread, and exhibited little indication of motility, whereas on the most hydrophilic surfaces, the cells adhered poorly if at all and when present on the surface displayed characteristics of being highly motile. The two surfaces that minimized cell adhesion consisted of two varieties of a diblock copolymer containing hydrophilic poly(ethylene oxide) and a copolymer bearing a zwitterionic group AEDAPS, (3-[2-(acrylamido)-ethyldimethyl ammonio] propane sulfonate). Increasing the proportion of AEDAPS in the copolymer decreased the adhesion of cells to the surface. Cells presented with micropatterns of cytophilic and cytophobic surfaces generated by polymer-on-polymer stamping displayed a surface-dependent cytoskeletal organization and a dramatic preference for adhesion to, and spreading on, the cytophilic surface, demonstrating the utility of polyelectrolyte films in manipulating smooth muscle cell adhesion and behavior.     

Novel whole cell adhesion assays of three isolates of the fouling diatom Amphora coffeaeformis reveal diverse responses to surfaces of different wettability

Whole cell, strength of adhesion assays of three different isolates of the fouling diatom Amphora coffeaeformis were compared using a hydrophilic surface viz. acid washed glass (AWG), and a hydrophobic surface viz. a self assembled monolayer (SAM) of undecanethiol (UDT). Assays were performed using a newly designed turbulent flow channel that permits direct observation and recording of cell populations on a test surface. Exposure to continuous shear stress over 3?h revealed that the more motile isolate, WIL2, adhered much more strongly to both test surfaces compared to the other two strains. When the response of the isolates to shear stress after 3?h was compared, there was no significant difference in the percentage of cells removed, irrespective of surface wettability. Cells of the three isolates of A. coffeaeformis varied significantly in their response to different surfaces during initial adhesion, indicating the presence of a wide range of 'physiological races' within this species.     

Novel whole cell adhesion assays of three isolates of the fouling diatom Amphora coffeaeformis reveal diverse responses to surfaces of different wettability

Whole cell, strength of adhesion assays of three different isolates of the fouling diatom Amphora coffeaeformis were compared using a hydrophilic surface viz. acid washed glass (AWG), and a hydrophobic surface viz. a self assembled monolayer (SAM) of undecanethiol (UDT). Assays were performed using a newly designed turbulent flow channel that permits direct observation and recording of cell populations on a test surface. Exposure to continuous shear stress over 3 h revealed that the more motile isolate, WIL2, adhered much more strongly to both test surfaces compared to the other two strains. When the response of the isolates to shear stress after 3 h was compared, there was no significant difference in the percentage of cells removed, irrespective of surface wettability. Cells of the three isolates of A. coffeaeformis varied significantly in their response to different surfaces during initial adhesion, indicating the presence of a wide range of ‘physiological races’ within this species.     

Tailored poly(2-oxazoline) polymer brushes to control protein adsorption and cell adhesion

POx bottle-brush brushes (BBBs) are synthesized by SIPGP of 2-isopropenyl-2-oxazoline and consecutive LCROP of 2-oxazolines on 3-aminopropyltrimethoxysilane-modified silicon substrates. The side chain hydrophilicity and polarity are varied. The impact of the chemical composition and architecture of the BBB upon protein (fibronectin) adsorption and endothelial cell adhesion are investigated and prove extremely low protein adsorption and cell adhesion on BBBs with hydrophilic side chains such as poly(2-methyl-2-oxazoline) and poly(2-ethyl-2-oxazoline). The influence of the POx side chain terminal function upon adsorption and adhesion is minor but the side chain length has a significant effect on bioadsorption.     

The influence of surface wettability on the adhesion strength of settled spores of the green alga enteromorpha and the diatom amphora

In this paper we report on the effect of surface wettabilityon surface selection and adhesion properties of settled (adhered)spores of the biofouling marine alga Enteromorpha and cellsof the diatom Amphora, through the use of patterned self-assembledmonolayers (SAMs). The SAMs were formed from alkanethiols terminatedwith methyl (CH₃) or hydroxyl (OH) groups, or mixtures of thetwo, creating a discontinuous gradient of wettability as measuredby advancing water contact angle. In the case of Enteromorpha,primary adhesion, as measured by the transition from a motilespore to a settled, sessile organism, is strongly promoted bythe hydrophobic surfaces. On the other hand, adhesion strengthof the settled spores, as measured by resistance to detachmentin a turbulent flow cell, is greatest on a hydrophilic surface.In the case of Amphora, there is little influence of surfacewettability on the primary adhesion of this organism, but motilityis inhibited at contact angles     

Adhesion of cultured mammalian central nervous system neurons to flame-modified hydrophobic surfaces

Summary Surface wettability is an excellent indicator of the ability of cells to adhere to a culture substrate. We have determined that brief exposure of a hydrophobic culture surface to a propane flame may increase wettability more than 1200% via the deposition of ionic combustion products. Previously nonadherent mouse spinal cord cells will adhere to and differentiate morphologically on a hydrophobic surface after flaming. Central nervous system cells remain adhered to flamed surfaces for periods of 2 mo. or longer and demonstrate spontaneous electrical activity during that time. Secondary modification of a flamed surface with polylysine further enhances the strength of single cell adhesion, thereby retarding mobility and promoting neurite extension. Flaming also enhances the wettability of common culture materials such as glass and polystyrene, as well as metal. Flaming of hydrophobic substrates through masks permits creation of discrete adhesion islands and patterns which may be used for a variety of investigations requiring maintenance of different cell types in separate regions of a culture surface. This research was supported by U.S. Public Health Service grant 2 RO1 NS 15167.     

Large area two-dimensional B cell arrays for sensing and cell-sorting applications

Regular arrays of nonadherent B cells over large areas were produced with the use of micropatterned molecular templates consisting of a newly designed poly(allylamine)-g-poly(ethylene glycol) polycation graft copolymer. Polymer-on-polymer stamping (POPS) techniques were applied successfully to create micron scale patterns of the graft copolymer on negatively charged multilayer surfaces without losing resistance to the nonspecific adsorption of proteins. To generate templates for B cell arrays, the characteristics of the patterned surface were modified via introduction of surface biotinylation and specific protein adsorption. The qualities of B cell arrays resulting from each template suggest the binding strength between nonadherent B cells and the template surface is the controlling factor in the fabrication of clean and regular arrays of immobilized lymphocytes over large areas, which is critical in many bio-technological and immunological applications.     

Structural organization of DMPC lipid layers on chemically micropatterned self-assembled monolayers as biomimetic systems

The growth structure of DMPC lipid layers on hydrophobic and hydrophilic alkylsilane-based self-assembled monolayers adsorbed on silicon has been investigated by means of X-ray reflectometry and atomic force microscopy. Hydrophilic modification of hydrophobically terminated ODS-SAMs has been achieved by dose-controlled irradiation with DUV light. While island formation of small DMPC bilayer islands is observed on hydrophobic SAM surfaces, closed layers of DMPC monolayers are formed on hydrophilic SAM surfaces. Furthermore, DMPC adsorption on chemically micropatterned substrates with alternating hydrophobic/hydrophilic surface properties has been studied by imaging ellipsometry and photoemission microscopy. Indication for at least partial bridging of hydrophobic areas by an adsorbed DMPC monolayer has been found.     

Functional binary micropattern of hyperbranched poly(ether amine) (hPEA-AN) network and poly(ether amine) (PEA) brush for recognition of guest molecules

A binary micropattern of anthracene-contained hyperbranched poly(ether amine) (hPEA-AN) network and poly(ether amine) (PEA) brush on gold surface was developed and explored. First, a micropatterned hPEA-AN network array on gold surface was fabricated by photolithography via photodimerization of anthracene moieties, and a PEA brush was subsequently immobilized on the remaining free gold surface areas by chemical adsorption of thiol groups. The patterned hPEA-AN network exhibits selectivity with respect to the adsorption of hydrophilic dyes: Methyl orange is strongly adsorbed, but rhodamine 6G is not, as indicated by the fluorescence response. The PEA brush domain exhibits excellent protein adsorption repellency, whereas the hPEA-AN network layer readily adsorbs protein. These characteristics make the binary hPEA-AN network and PEA brush array sensitive to different kinds of dyes and proteins, which open up pathways to potential applications as microsensors, biochips, and bioassays.     

Adhesion of the entomopathogenic fungus Beauveria (Cordyceps) bassiana to substrata

The entomopathogenic fungus Beauveria bassiana produces at least three distinct single-cell propagules, aerial conidia, vegetative cells termed blastospores, and submerged conidia, which can be isolated from agar plates, from rich broth liquid cultures, and under nutrient limitation conditions in submerged cultures, respectively. Fluorescently labeled fungal cells were used to quantify the kinetics of adhesion of these cell types to surfaces having various hydrophobic or hydrophilic properties. Aerial conidia adhered poorly to weakly polar surfaces and rapidly to both hydrophobic and hydrophilic surfaces but could be readily washed off the latter surfaces. In contrast, blastospores bound poorly to hydrophobic surfaces, forming small aggregates, bound rapidly to hydrophilic surfaces, and required a longer incubation time to bind to weakly polar surfaces than to hydrophilic surfaces. Submerged conidia displayed the broadest binding specificity, adhering to hydrophobic, weakly polar, and hydrophilic surfaces. The adhesion of the B. bassiana cell types also differed in sensitivity to glycosidase and protease treatments, pH, and addition of various carbohydrate competitors and detergents. The outer cell wall layer of aerial conidia contained sodium dodecyl sulfate-insoluble, trifluoroacetic acid-soluble proteins (presumably hydrophobins) that were not present on either blastospores or submerged conidia. The variations in the cell surface properties leading to the different adhesion qualities of B. bassiana aerial conidia, blastospores, and submerged conidia could lead to rational design decisions for improving the efficacy and possibly the specificity of entomopathogenic fungi for host targets.     

Adhesion of the Entomopathogenic Fungus Beauveria (Cordyceps) bassiana to Substrata

The entomopathogenic fungus Beauveria bassiana produces at least three distinct single-cell propagules, aerial conidia, vegetative cells termed blastospores, and submerged conidia, which can be isolated from agar plates, from rich broth liquid cultures, and under nutrient limitation conditions in submerged cultures, respectively. Fluorescently labeled fungal cells were used to quantify the kinetics of adhesion of these cell types to surfaces having various hydrophobic or hydrophilic properties. Aerial conidia adhered poorly to weakly polar surfaces and rapidly to both hydrophobic and hydrophilic surfaces but could be readily washed off the latter surfaces. In contrast, blastospores bound poorly to hydrophobic surfaces, forming small aggregates, bound rapidly to hydrophilic surfaces, and required a longer incubation time to bind to weakly polar surfaces than to hydrophilic surfaces. Submerged conidia displayed the broadest binding specificity, adhering to hydrophobic, weakly polar, and hydrophilic surfaces. The adhesion of the B. bassiana cell types also differed in sensitivity to glycosidase and protease treatments, pH, and addition of various carbohydrate competitors and detergents. The outer cell wall layer of aerial conidia contained sodium dodecyl sulfate-insoluble, trifluoroacetic acid-soluble proteins (presumably hydrophobins) that were not present on either blastospores or submerged conidia. The variations in the cell surface properties leading to the different adhesion qualities of B. bassiana aerial conidia, blastospores, and submerged conidia could lead to rational design decisions for improving the efficacy and possibly the specificity of entomopathogenic fungi for host targets.     

Adhesion of bacillus spores in relation to hydrophobicity

The adhesion of spores of five different Bacillus species to solid surfaces of different hydrophobicity was evaluated. The spore surface hydrophobicity was measured using hydrophobic interaction chromatography (HIC). A large variation in hydrophobicity was found among the spores of the different species tested. The degree of adhesion of spores to the solid surfaces was consistent with the results obtained using the HIC method. The most hydrophobic spores, according to the HIC method, adhered in a much larger extent to the hydrophobic surfaces. Furthermore, spores generally adhered to a greater extent to hydrophobic and hydrophilic surfaces than did the vegetative cells.     

THE ROLE OF NITRIC OXIDE IN DIATOM ADHESION IN RELATION TO SUBSTRATUM PROPERTIES1

Adhesion of raphid diatoms to surfaces, mediated by the secretion of extracellular polymeric substances (EPS), is an important strategy for growth and survival. Diatom biofilms are also important in the context of biofouling. Diatoms exhibit selectivity in adhering to surfaces, but little is understood about how they perceive the properties of a substratum and translate that perception into altered adhesion properties. In this study, we demonstrate that Seminavis robusta Danielidis et D. G. Mann, like many other pennate diatoms, adheres more strongly to hydrophobic surfaces (such as silicone elastomer foul‐release coatings) than to hydrophilic surfaces. To explore the cellular mechanisms that may underlie this selectivity, we tested the hypothesis that diatoms may perceive a hydrophilic surface as unconducive to adhesion through a form of stress response involving nitric oxide (NO) production. Single‐cell imaging with the fluorescent indicator DAF‐FM DA (4‐amino‐5‐methylamino‐2′,7′‐difluorofluorescein diacetate), revealed NO levels that were 4‐fold higher in cells adhered to a hydrophilic surface (acid‐washed glass) compared with a hydrophobic surface (polydimethylsiloxane elastomer, PDMSE). Elevated levels of NO caused by the addition of the NO donor S‐nitroso‐N‐acetylpenicillamine (SNAP) did not affect growth, but cells showed reduced adhesion strength to both glass and PDMSE. Addition of the nitric oxide synthase inhibitor NG‐monomethyl‐l ‐arginine (NMMA) caused a small but significant increase in adhesion strength. Overall, the results suggest that NO acts as a signal of the wettability properties of substrata for Seminavis.     

Hydrophilic monolayer formation of adsorbed cationic starch and cationic hydroxyethyl cellulose derivatives on polyester surfaces

Cationic starch, cationic cellulose derivatives, and hydrophobically modified cationic cellulose were physically adsorbed from aqueous solution onto oppositely charged hydrophobic polyester (poly(ethylene terephthalate)) fabric and nonwoven, and this resulted in hydrophilic surface properties. Surface coverage of the polysaccharides occurred primarily by strong electrostatic interactions, and the surface characteristics were evaluated by measuring the time required for a water droplet to be absorbed into the polyester material as well as by electron spectroscopy for chemical analysis (ESCA). From a comparison of the adsorption characteristics we assess the polysaccharide-dependent and substrate-dependent adsorption behavior and discuss the similarities and differences in the hydrophilic properties and wettability observed. In particular, the temperature of the cationic polysaccharide solutions in which the substrate was immersed, the configuration of the polymer in solution, and the presence of hydrophobic substituents on the cationic moiety have a considerable effect on the polysaccharide affinity and its adsorption on the surface, irrespective of the substrate type (fabric or nonwoven). We also evaluate the relative contribution of the polyelectrolyte molecular weight, concentration in solution, and degree of charge density along the polymer chain which determine the range of interactions and alter surface hydroplilicity dependent on the type of substrate.     

Debaryomyces hansenii strains with different cell sizes and surface physicochemical properties adhere differently to a solid agarose surface

The initial adhesion of four Debaryomyces hansenii strains to a solid agarose surface was investigated and correlated with their cell size and some cell surface physicochemical properties, i.e. (i) hydrophobicity and (ii) electron donor/acceptor ability. One strain adhered very poorly, whereas the three other strains were more adhesive. The former strain had a very hydrophilic cell surface, whereas the latter strains had more hydrophobic cell surfaces. In addition, the strain with the lowest adhesion among the adhesive strains had a more hydrophobic cell surface than the two most adhesive strains. Finally, the more adhesive the strain was, the larger it was, and the better it was to donate electrons from its cell surface. These results show a clear relationship between the cell size, the cell surface physicochemical properties, and the initial adhesion of D. hansenii. A possible explanation of this relationship is discussed.     

Micropatterned, self-assembled monolayers for fabrication of transfected cell microarrays

The aim of this study was to develop the cell microarray that allows efficient transfer of multiple genes into mammalian cells cultured on the microarray in a high-throughput fashion. A microarray was fabricated using a gold-coated glass plate having a micropatterned, self-assembled monolayer of alkanethiols carrying ionic and nonionic terminal groups. Plasmid DNA and a cationic lipid were loaded by alternate electrostatic adsorption to the microspots to obtain a plasmid DNA microarray. The loading and the release of lipid-DNA complex were studied by, respectively, the fluorescence staining of DNA and the imaging of the microarray with a surface plasmon resonance (SPR) apparatus. The transfection efficiency was evaluated by directly plating and culturing human embryonic kidney cells onto the microarray. The results demonstrated that cells which adhered to the DNA-loaded spots were transfected to express the encoded model proteins for several days. The chemistry of the monolayers and the number of alternate adsorption cycles had large effects on the efficiency of transfection. This may be explained from the availability of the lipid-DNA complex to the cells directly contacted. We conclude that the micropatterned, self-assembled monolayers greatly facilitate regionally defined loading of DNAs and expression of the encoded protein in mammalian cells.     

Analysis of ordered arrays of adsorbed lysozyme by scanning tunneling microscopy.

Scanning tunneling microscopy (STM) has been used to observe lysozyme at a graphite surface directly in order to gain mechanistic information about the molecular events involved in protein adsorption. The experiments were performed using an insulated tip in an aqueous protein solution, allowing the time course of the adsorption process to be followed, including the evolution of ordered arrays. Ordered arrays of protein molecules were observed, with lattice spacings that varied with bulk protein concentration and salt strength. Fourier analysis was used to determine the average cell dimensions of an array. From the observed lattice spacings, it was possible to estimate the surface coverage of the protein, and thus, by varying the conditions, adsorption isotherms could be obtained. These isotherms compare well with adsorption isotherms measured using total internal reflectance fluorescence (TIRF) spectroscopy on a hydrophobic surface. Since the protein is charged and the electrolyte has an effect on the isotherms, electrostatics are a likely controlling factor. Molecular electrostatics computations were thus used to investigate the possible origins of the lattice structure, and they suggest that favorable intermolecular interactions among adsorbed molecules are consistent with hydrophobically dominated protein-surface interactions.     

Role of hydrophobic surface proteins in mediating adherence of group B streptococci to epithelial cells.

Determination of the cell-surface hydrophobicity of group B streptococci by hydrophobic interaction chromatography on phenyl-Sepharose revealed that human and bovine group B streptococcal isolates with protein surface antigens, either alone or in combination with polysaccharide antigens, were mainly hydrophobic, whereas those with polysaccharide antigens alone were mainly hydrophilic. Removal of capsular neuraminic acid enhanced, and pronase treatment reduced, surface hydrophobicity. The hydrophobic surface proteins, solubilized by mutanolysin treatment of the bacteria and isolated by hydrophobic interaction chromatography, appeared in SDS-PAGE as numerous protein bands. Staphylococcal carrier cells loaded with antibodies produced against hydrophobic surface proteins agglutinated specifically with hydrophobic group B streptococci. No agglutination reaction was observed with hydrophilic cultures. Hydrophobic group B streptococci adhered to buccal epithelial cells in significantly higher numbers than did hydrophilic cultures. The adherence of group B streptococci to epithelial cells was inhibited in the presence of isolated hydrophobic proteins and in the presence of specific antibodies produced against hydrophobic proteins. The results of this study demonstrate a close relation between the occurrence of type-specific antigens, surface hydrophobicity and the adherence of group B streptococci to epithelial cells.