A continuous spectrophotometric enzyme-coupled assay for deoxynucleoside triphosphate triphosphohydrolases

We describe a continuous, spectrophotometric, enzyme-coupled assay useful to monitor reactions catalyzed by nucleoside triphosphohydrolases. In particular, using Escherichia coli deoxynucleoside triphosphohydrolase (Dgt), which hydrolyzes dGTP to deoxyguanosine and tripolyphosphate (PPP_i) as the enzyme to be tested, we devised a procedure relying on purine nucleoside phosphorylase (PNPase) and xanthine oxidase (XOD) as the auxiliary enzymes. The deoxyguanosine released by Dgt can indeed be conveniently subjected to phosphorolysis by PNPase, yielding deoxyribose-1-phosphate and guanine, which in turn can be oxidized to 8-oxoguanine by XOD. By this means, it was possible to continuously detect Dgt activity at 297 nm, at which wavelength the difference between the molar extinction coefficients of 8-oxoguanine (8000 M⁻¹ cm⁻¹) and guanine (1090 M⁻¹ cm⁻¹) is maximal. The initial velocities of Dgt-catalyzed reactions were then determined in parallel with the enzyme-coupled assay and with a discontinuous high-performance liquid chromatography (HPLC) method able to selectively detect deoxyguanosine. Under appropriate conditions of excess auxiliary enzymes, the activities determined with our continuous enzyme-coupled assay were quantitatively comparable to those observed with the HPLC method. Moreover, the enzyme-coupled assay proved to be more sensitive than the chromatographic procedure, permitting reliable detection of Dgt activity at low dGTP substrate concentrations.     

Microtiter assay for glutamine synthetase biosynthetic activity using inorganic phosphate detection

A microtiter assay was developed for the improved detection of inorganic phosphate released from adenosine 5'-triphosphate (ATP) in the glutamine synthetase biosynthetic assay. In this assay, ascorbic acid replaces the traditionally used ferrous sulfate to reduce the phosphomolybdate complex. As a result, increased color development, linearity, and sensitivity are achieved. Additionally, in the microtiter format, multiple sets of kinetic experiments can be rapidly performed in parallel. The color that forms is rendered highly stable by the addition of sodium citrate. However, the commonly used sodium arsenite in this solution has been omitted, making the assay less hazardous. The assay is linear to 100 nmol Pi in the presence of 10mM ATP.     

A colorimetric assay for sulfiredoxin activity using inorganic phosphate measurement

2-Cys peroxiredoxin (Prx) is the major subgroup of a family of Prx enzymes that reduce peroxide molecules such as hydrogen peroxide (H₂O₂). 2-Cys Prxs are inactivated when their active site cysteine residue is hyperoxidized to sulfinic acid. Sulfiredoxin (Srx) is an enzyme that catalyzes reduction of hyperoxidized 2-Cys Prxs in the presence of ATP, Mg²⁺, and thiol equivalent. Therefore, Srx activity is crucial for cellular function of 2-Cys Prxs. The method currently available for the determination of Srx activity relies on immunoblot detection using antibodies to hyperoxidized enzymes. Here we introduce a simple quantitative assay for Srx activity based on the colorimetric determination of inorganic phosphate released in Srx-dependent reduction of hyperoxidized Prx using the malachite green. The colorimetric assay was used for high-throughput screening of 25,000 chemicals to find Srx inhibitors.     

Bacteriophage-based biosorbents coupled with bioluminescent ATP assay for rapid concentration and detection of Escherichia coli

Wild type T4 bacteriophage and recombinant T4 bacteriophages displaying biotin binding peptide (BCCP) and cellulose binding module (CBM) on their heads were immobilized on nano-aluminum fiber-based filter (Disruptor™), streptavidin magnetic beads and microcrystalline cellulose, respectively. Infectivity of the immobilized phages was investigated by monitoring the phage-mediated growth inhibition of bioluminescent E. coli B and cell lysis using bioluminescent ATP assay. The results showed that phage immobilization resulted in a partial loss of infectivity as compared with the free phage. Nevertheless, the use of a biosorbent based on T4 bacteriophage immobilized on Disruptor™ filter coupled with a bioluminescent ATP assay allowed simultaneous concentration and detection of as low as 6 × 10³ cfu/mL of E. coli in the sample within 2 h with high accuracy (CV = 1-5% in log scale). Excess of interfering microflora at levels 60-fold greater than the target organism did not affect the results when bacteriophage was immobilized on the filter prior to concentration of bacterial cells.     

A live cell hormone-binding assay on transgenic bacteria expressing a eukaryotic receptor protein

The investigation of hormone-receptor interaction normally needs isolation and extensive purification of the receptor protein or a particular receptor-containing fraction. To bypass these time- and resource-consuming procedures, we have established a live cell-based assay using transgenic bacteria expressing single eukaryotic receptors. Here we describe some biochemical features of the Arabidopsis cytokinin receptor CRE1/AHK4 expressed in Escherichia coli. The data show that the main characteristics of the ligand-receptor interaction, including binding affinity and ligand specificity, can be determined using intact bacteria expressing a functional receptor.     

Time-resolved fluorescence-based assay for rapid detection of Escherichia coli

Fast and simple detection of pathogens is of utmost importance in health care and the food industry. In this article, a novel technology for the detection of pathogenic bacteria is presented. The technology uses lytic-specific bacteriophages and a nonspecific interaction of cellular components with a luminescent lanthanide chelate. As a proof of principle, Escherichia coli-specific T4 bacteriophage was used to infect the bacteria, and the cell lysis was detected. In the absence of E. coli, luminescent Eu³⁺–chelate complex cannot be formed and low time-resolved luminescence signal is monitored. In the presence of E. coli, increased luminescence signal is observed as the cellular contents are leached to the surrounding medium. The luminescence signal is observed as a function of the number of bacteria in the sample. The homogeneous assay can detect living E. coli in bacterial cultures and simulated urine samples within 25 min with a detection limit of 1000 or 10,000 bacterial cells/ml in buffer or urine, respectively. The detection limit is at the clinically relevant level, which indicates that the method could also be applicable to clinical settings for fast detection of urine bacteria.     

Development of a real-time SYBRGreen PCR assay for rapid detection of acquired AmpC in Enterobacteriaceae

Introduction

Acquired AmpC enzymes, classified as miscellaneous extended-spectrum β-lactamase (ESBL_M) enzymes according to a recently proposed β-lactamase classification, are increasing according to several publications. Simple and rapid methods for detection of ESBL_M are needed for appropriate infection control. A gel-based multiplex PCR method for acquired bla_AmpC detection and subtype classification has been available for several years. Here, we describe a modification of the protocol to suit real-time PCR platforms and to include novel genotypes.

Material and methods

Clinical isolates with clavulanic acid non-reversible non-susceptibility to extended-spectrum cephalosporins were subjected to combination disk testing with cefoxitin +/− cloxacillin at Malmö University Hospital. Phenotypical AmpC production was defined as cloxacillin reversible cefoxitin resistance. In this study 51 phenotypical AmpC-producing isolates, were subjected to the acquired bla_AmpC real-time PCR assay. The acquired blaAmpC positive isolates were further characterized by DNA sequencing of the acquired AmpC encoding gene, Pulsed-Field Gel Electrophoresis (PFGE) and PCR-based replicon typing.

Results and discussion

The real-time PCR assay was able to detect and sub-classify all acquired bla_AmpC genes described to date. The assay can be performed in less than 3 h, including pre-PCR preparations. Analysis of the isolate collection resulted in 18 of 51 phenotypical AmpC-producing isolates being positive in the acquired bla_AmpC real-time multiplex PCR assay; 17 of subtype CIT and one DHA. Sequence analysis identified 16 isolates as blaCMY-2, one as blaCMY-16 and one as blaDHA-1. Detected plasmid replicon types were I1 and B/O. Two of the E. coli isolates were identical according to PFGE and the others were unrelated.     

Polynucleotide phosphorylase interacts with ribonuclease E through a betabetaalphabetabetaalpha domain

In the present work we have used a double-hybrid assay in bacteria to identify a putative domain in E. coli PNPase required for in vivo interaction with RNase E. We used a 202 aa fragment of RNase E previously reported as the PNPase binding domain in this enzyme and a collection of 13 different fragments of 105 aa, spanning the entire sequence of 734 aa PNPase (GenBank Accession number NP_417633). Our results indicate that two clones of PNPase including residues 158-262 and residues 473-577 contain interaction sites for RNase E within a betabetaalphabetabetaalpha domain configuration. Three-dimensional modeling of the E. coli PNPase based on the S. antibioticus protein structure indicates that the putative binding domain is located on the monomer surface, facing outward from the trimeric tertiary structure. Since a copy of the betabetaalphabetabetaalpha domain is also found in RNase PH, we investigated and found an interaction with RNase E in a pull-down assay. We suggest this interaction takes place through the similar betabetaalphabetabetaalpha domain present in the tertiary structure of this enzyme. Based on these results, we propose that RNase PH and RNase E could form functional assemblies in E. coli.     

Development of multiplex PCR assay for rapid detection of Riemerella anatipestifer, Escherichia coli, and Salmonella enterica simultaneously from ducks

Three pathogens, Riemerella anatipestifer, Escherichia coli, and Salmonella enterica, are leading causes of bacterial fibrinous pericarditis and perihepatitis in ducks in China and worldwide. It is difficult to differentiate these pathogens when obtaining a diagnosis on clinical signs and pathological changes. The aim of this research was to develop a multiplex polymerase chain reaction (m-PCR) that could discriminate R. anatipestifer, E. coli, and S. enterica rapidly in field isolates, or detect the three bacteria in clinical samples from diseased ducks. We selected the DnaB helicase (dnaB) gene of R. anatipestifer, alkaline phosphatase (phoA) gene of E. coli and invasion protein (invA) gene of S. enterica as target genes. In optimized conditions, the limitation of detection was approximately 10³ colony forming units (CFU) of each of these three bacterial pathogens per PCR reaction tube. The m-PCR method showed specific amplification of respective genes from R. anatipestifer, E. coli, and S. enterica. Using the m-PCR system, bacterial strains isolated from diseased ducks in our laboratory were categorized successfully, and the pathogens could also be detected in clinical samples from diseased ducks. Therefore, the m-PCR system could distinguish the three pathogens simultaneously, for identification, routine molecular diagnosis and epidemiology, in a single reaction.     

Reversible inhibition of Escherichia coli inorganic pyrophosphatase by fluoride: trapped catalytic intermediates in cryo-crystallographic studies

Here, we describe high-resolution X-ray structures of Escherichia coli inorganic pyrophosphatase (E-PPase) complexed with the substrate, magnesium, or manganese pyrophosphate. The structures correspond to steps in the catalytic synthesis of enzyme-bound pyrophosphate (PP(i)) in the presence of fluoride as an inhibitor of hydrolysis. The catalytic reaction intermediates were trapped applying a new method that we developed for initiating hydrolytic activity in the E-PPase crystal. X-ray structures were obtained for three consecutive states of the enzyme in the course of hydrolysis. Comparative analysis of these structures showed that the Mn2+-supported hydrolysis of the phosphoanhydride bond is followed by a fast release of the leaving phosphate from the P1 site. The electrophilic phosphate P2 is trapped in the "down" conformation. Its movement into the "up" position most likely represents the rate-limiting step of Mn2+-supported hydrolysis. We further determined the crystal structure of the Arg43Gln mutant variant of E-PPase complexed with one phosphate and four Mn ions.     

Molecular cloning of the phosphate (inorganic) transport (pit) gene of Escherichia coli K12. Identification of the pit+ gene product and physical mapping of the pit-gor region of the chromosome

Summary The pit ⁺ gene, encoding the phosphate (inorganic) transport system of Escherichia coli, was isolated from a library of E. coli genes inserted in the cosmid vector pHC79. A 25.5-kb chromosomal DNA fragment was shown also to carry the gor locus encoding glutathione oxidoreductase. Physical mapping placed the two genes about 10 kb apart, confirming bacteriophage P1 mapping of the 77-min region. Subcloning and deletion analysis indicated that the entire pit ⁺ gene was located within a 2.2-kb Sal1-Ava1 fragment. The pit ⁺ gene product was identified by SDS-polyacrylamide gel electrophoresis as a 39-kdal inner membrane protein by two methods: (i) ³⁵S-methionine-labelling of minicells carrying pit ⁺ plasmids or plasmids from which all or part of the pit ⁺ gene was deleted. (ii) Overproduction of the Pit protein using a thermoinducible runaway replication plasmid.Complementation of the pit-1 mutant allele using a unit-copy-number pit ⁺ plasmid indicated that the pit-1 mutation is recessive.Strains carrying a multicopy pit ⁺ plasmid show a 10-fold increase in the initial rate of phosphate uptake; however there is no change in the steady-state level of ³²Pi accumulation.Abbreviations kb kilobase-pairs - kdal kilodalton - Pi inorganic phosphate - G3P sn-glycerol-3-phosphate - LB Luria broth - Tc tetracycline - Cm chloramphenicol - Ap ampicillin - UV ultraviolet light - TE 10 mM Tris.HCl, pH 8.0, 1 mM EDTA - HEPES N-2-hydroxyethylpiperazine-N-2-ethanesulphonic acid     

A novel assay for rapid in vivo determination of phenotypic stability of recombinant ethanol-producing microorganisms

A rapid empirical assay is presented for assessing the phenotypic stability of continuous cultures of recombinant bacteria containing transposed pdc and adh genes for ethanol production. The method measures spectrophotometrically the rate of colour formation when cells oxidize added ethanol to acetaldehyde in the presence of Schiff’s reagent. During chemostat cultures of the recombinant ethanologen Escherichia coli KO11 on 20 g/l glucose, assay activities were stable and high at ca 8 × 10⁻⁴ ΔOD₅₄₀/(s.OD₅₅₀), reflecting the high, stable ethanol yield (ca 95%). On 20 g/l and 50 g/l xylose, ethanol yields declined rapidly to about 60% and this was closely mirrored by the assay activities which fell to ca 1.5 ΔOD₅₄₀/(s.OD₅₅₀), only slightly higher than those measured for the parent strain. Typically taking only about an hour to perform, the assay provides a faster means of gauging the phenotypic stability of ethanol production than is possible by conventional methods.     

Fluorescence-based detection of thiols in vitro and in vivo using dithiol probes

Thiols play a central role in maintaining biological homeostasis. Their levels can change dramatically in response to oxidative stress associated with toxic insults, bacterial infection, and disease. Therefore, a reagent that can monitor thiol levels both in vitro and in vivo would be useful for assays and as a biomarker. Such a reagent should (i) be selective for thiols, (ii) be able to penetrate cell walls, and (iii) have a low reduction potential so as not to create oxidative stress in a cell. We have developed such a fluorescent reagent (DSSA) based on a dithiol linker: (i) the use of a dithiol linker makes it selective for thiols; (ii) the use of fluorophores that populate neutral states at physiological pH improves cell wall penetration; and (iii) because of the reagent's low reduction potential (-0.60 V), it will not stress cells oxidatively. For example, 5 microM of reagent is responsive to changes in glutathione levels in the physiologically relevant range of 1 to 10mM, yet this would oxidize less than 1% of cellular glutathione. In Escherichia coli, decreased thiol levels were detected in cells deficient in glutathione synthesis. In zebrafish embryos, the DSSA reagent permitted detection of unusually high thiol levels in the zebrafish chorion.     

Protection against oxidative stress in Escherichia coli stationary phase by a phosphate concentration-dependent genes expression

Escherichia coli gradually decline the capacity to resist oxidative stress during stationary phase. Besides the aerobic electron transport chain components are down-regulated in response to growth arrest. However, we have previously reported that E. coli cells grown in media containing at least 37 mM phosphate maintained ndh expression in stationary phase, having high viability and low NADH/NAD⁺ ratio. Here we demonstrated that, in the former condition, other aerobic respiratory genes (nuoAB, sdhC, cydA, and ubiC) expression was maintained. In addition, reactive oxygen species production was minimal and consequently the levels of thiobarbituric acid-reactive substances and protein carbonylation were lower than the expected for stationary cells. Interestingly, defense genes (katG and ahpC) expression was also maintained during this phase. Our results indicate that cells grown in high phosphate media exhibit advantages to resist endogenous and exogenous oxidative stress in stationary phase.     

Streptococcus pneumononiae gyrase ATPase: development and validation of an assay for inhibitor discovery and characterization

The rise in bacterial resistance to antibiotics demonstrates the medical need for new antibacterial agents. One approach to this problem is to identify new antibacterials that act through validated drug targets such as bacterial DNA gyrase. DNA gyrase uses the energy of ATP hydrolysis to introduce negative supercoils into plasmid and chromosomal DNA and is essential for DNA replication. Inhibition of the ATPase activity of DNA gyrase is the mechanism by which coumarin-class antibiotics such as novobiocin inhibit bacterial growth. Although ATPase inhibitors exhibit potent antibacterial activity against gram-positive pathogens, no gyrase ATPase activity from a gram-positive organism is described in the literature. To address this, we developed and optimized an enzyme-coupled phosphate assay and used this assay to characterize the ATPase kinetics of Streptococcus pneumoniae gyrase. The S. pneumoniae enzyme exhibits cooperativity with ATP and requires organic potassium salts. We also studied inhibition of the enzyme by novobiocin. Apparent inhibition constants for novobiocin increased linearly with ATP concentration, indicative of an ATP-competitive mechanism. Similar binding affinities were measured by isothermal titration calorimetry. These results reveal unique features of the S. pneumoniae DNA gyrase ATPase and demonstrate the utility of the assay for screening and kinetic characterization of ATPase inhibitors.     

Enhanced firefly bioluminescence assay of ATP in the presence of ATP extractants by using diethylaminoethyl-dextran

A highly sensitive ATP bioluminescence assay with diethylaminoethyl-dextran (DEAE-Dx) in the presence of ATP extractants such as trichloroacetic acid (TCA) and Triton X-100 is described. These ATP extractants inhibited the activity of firefly luciferase, resulting in a remarkable decrease in the intensity of light emission. However, DEAE-Dx enhanced the intensity of light emission as long as firefly luciferase was active in the presence of the ATP extractants. When DEAE-Dx was used for the assay, the detection limits for ATP in the presence of TCA and Triton X-100 were 0.3 and 0.5 pM, respectively, in aqueous ATP standard solution. The detection limit in the presence of DEAE-Dx was improved 13- to 20-fold compared to that in the absence of DEAE-Dx. The method was applied to the determination of ATP in Escherichia coli extracts. When a 5% solution of TCA was used for the extraction of ATP from E. coli cells, the detection limit corresponded to 250 cells ml(-1) of E. coli.     

Degradation of ribosomal RNA during starvation: comparison to quality control during steady-state growth and a role for RNase PH

Ribosomal RNAs are generally stable in growing Escherichia coli cells. However, their degradation increases dramatically under conditions that lead to slow cell growth. In addition, incomplete RNA molecules and molecules with defects in processing, folding, or assembly are also eliminated in growing cells in a process termed quality control. Here, we show that there are significant differences between the pathways of ribosomal RNA degradation during glucose starvation and quality control during steady-state growth. In both processes, endonucleolytic cleavage of rRNA in ribosome subunits is an early step, resulting in accumulation of large rRNA fragments when the processive exoribonucleases, RNase II, RNase R, and PNPase are absent. For 23S rRNA, cleavage is in the region of helix 71, but the exact position can differ in the two degradative processes. For 16S rRNA, degradation during starvation begins with shortening of its 3' end in a reaction catalyzed by RNase PH. In the absence of this RNase, there is no 3' end trimming of 16S rRNA and no accumulation of rRNA fragments, and total RNA degradation is greatly reduced. In contrast, the degradation pattern in quality control remains unchanged when RNase PH is absent. During starvation, the exoribonucleases RNase II and RNase R are important for fragment removal, whereas for quality control, RNase R and PNPase are more important. These data highlight the similarities and differences between rRNA degradation during starvation and quality control during steady-state growth and describe a role for RNase PH in the starvation degradative pathway.     

Expression of the carbohydrate recognition domain of FimH and development of a competitive binding assay

Uropathogenic Escherichia coli (UPEC) is the primary cause of urinary tract infections (UTIs). In the first step of this infective process, the virulence factor FimH located on type 1 pili allows UPEC to specifically adhere to oligosaccharides, which are part of glycoproteins on the urinary bladder mucosa. This initial step prevents the clearance of E. coli from the urinary tract and enables the invasion of the host cells. Because FimH antagonists can block this interaction, they exhibit a promising therapeutic potential as anti-infectives. For the evaluation of their binding properties, a reliable, target-based affinity assay is required. Here, we describe the expression and purification of the carbohydrate recognition domain of FimH (FimH-CRD) as well as the development of a competitive binding assay. FimH-CRD linked with a thrombin cleavage site to a 6His-tag is recombinantly expressed and purified by affinity chromatography. For the evaluation of FimH antagonists, a cell-free binding assay based on the interaction of a biotinylated polyacrylamide glycopolymer with the FimH-CRD was developed. Complexation of the biotinylated glycopolymer with streptavidin coupled to horseradish peroxidase allows the quantification of the binding properties of FimH antagonists. The assay format was optimized and validated by a comparison with affinity data from reported assays.     

Light-dependent phosphate uptake of a submersed macrophyte Myriophyllum spicatum L.

The uptake kinetics of phosphate (Pi) by Myriophyllum spicatum was determined from adsorption and absorption under light and dark conditions. Pi uptake was light dependent and showed saturation following the Michaelis-Menten relation (in light: V = 16.91 × [Pi](1.335 + [Pi]), R² = 0.90, p < 0.001; in the dark: V = 5.13 × [Pi](0.351 + [Pi]), R² = 0.77, p < 0.001). Around 77% of the loss of Pi in the water column was absorbed into the tissue of M. spicatum, and only 23% was adsorbed on the surface of the plant shoots. Our study shows that M. spicatum shoots have a much higher affinity (in light: 3.9 μmol g⁻¹ dw h⁻¹ μM⁻¹; in the dark: 3.7 μmol g⁻¹ dw h⁻¹ μM⁻¹) and V_max (maximum uptake rate, shoot light) for Pi uptake than many other aquatic macrophytes (in light: 0.002-0.23 μmol g⁻¹ dw h⁻¹ μM⁻¹; in the dark: 0.002-0.19 μmol g⁻¹ dw h⁻¹ μM⁻¹), which may provide a competitive advantage over other macrophytes across a wide range of Pi concentrations.