Ultrasound mediated enzymatic hydrolysis of cellulose and carboxymethyl cellulose

A recombinant Trichoderma reesei cellulase was used for the ultrasound‐mediated hydrolysis of soluble carboxymethyl cellulose (CMC) and insoluble cellulose of various particle sizes. The hydrolysis was carried out at low intensity sonication (2.4–11.8 W cm^?2 sonication power at the tip of the sonotrode) using 10, 20, and 40% duty cycles. [A duty cycle of 10%, for example, was obtained by sonicating for 1 s followed by a rest period (no sonication) of 9 s.] The reaction pH and temperature were always 4.8 and 50°C, respectively. In all cases, sonication enhanced the rate of hydrolysis relative to nonsonicated controls. The hydrolysis of CMC was characterized by Michaelis‐Menten kinetics. The Michaelis‐Menten parameter of the maximum reaction rate V_max was enhanced by sonication relative to controls, but the value of the saturation constant K_m was reduced. The optimal sonication conditions were found to be a 10% duty cycle and a power intensity of 11.8 W cm^?2. Under these conditions, the maximum rate of hydrolysis of soluble CMC was nearly double relative to control. In the hydrolysis of cellulose, an increasing particle size reduced the rate of hydrolysis. At any fixed particle size, sonication at a 10% duty cycle and 11.8 W cm^?2 power intensity improved the rate of hydrolysis relative to control. Under the above mentioned optimal sonication conditions, the enzyme lost about 20% of its initial activity in 20 min. Sonication was useful in accelerating the enzyme catalyzed saccharification of cellulose. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1448–1457, 2013     

Detrimental effect of cellulose oxidation on cellulose hydrolysis by cellulase

To effectively convert complex and recalcitrant biomass carbohydrates to simple platform sugars useful for fuel and chemicals production, mechanical or chemical pre-treatments are often required to make the carbohydrates more accessible for enzymatic hydrolysis. Due to their harsh conditions, some pre-treatments might negatively affect enzymatic hydrolysis because of events such as cellulose oxidation. To study how oxidative modification may impact cellulose's reactivity toward hydrolysis by cellulases, we prepared three cellulose substrates by cupric ion and hypochlorite oxidations, and subjected the derived celluloses to hydrolysis by various cellobiohydrolases from glycoside hydrolase families 6 and 7, and one cellulolytic Hypocrea jecorina extracellular enzyme mixture. We observed a profound decrease of enzymatic hydrolysis on the oxidized celluloses. The effect was attributed to the interference, from oxidized functional groups in cellulose, on its binding/activation in the active pocket/tunnel of cellobiohydrolases. Potential implication of the observed effect from cellulose oxidation on pre-treatment optimization and cellulase improvement was discussed.     

A structural study of fluorinated cellulose: crystallization of fluorinated cellulose by conversion treatments used for cellulose

A deoxyfluorocellulose derivative, with regioselective substitution mostly at the C-6 carbon atoms, has been studied by an X-ray diffraction method. The results showed that the crystallinity of the fluorinated cellulose is low but can be enhanced by a specific conversion treatment. The hydrothermally treated sample displayed a spectrum similar to that of cellulose IV.     

Enhancement of enzymatic saccharification of cellulose by cellulose dissolution pretreatments

Attempts were made to enhance cellulose saccharification by cellulase using cellulose dissolution as a pretreatment step. Four cellulose dissolution agents, NaOH/Urea solution, N-methylmorpholine-N-oxide (NMMO), ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and 85% phosphoric acid were employed to dissolve cotton cellulose. In comparison with conventional cellulose pretreatment processes, the dissolution pretreatments were operated under a milder condition with temperature <130 °C and ambient pressure. The dissolved cellulose was easily regenerated in water. The regenerated celluloses exhibited a significant improvement (about 2.7- to 4.6-fold enhancement) on saccharification rate during 1st h reaction. After 72 h, the saccharification yield ranged from 87% to 96% for the regenerated celluloses while only around 23% could be achieved for the untreated cellulose. Even with high crystallinity, cellulose regenerated from phosphoric acid dissolution achieved the highest saccharification rates and yield probably due to its highest specific surface area and lowest degree of polymerization (DP).     

Polymorphism of cellulose I family: reinvestigation of cellulose IVI

Polymorphs of cellulose I, III(I), and IV(I) have been investigated by X-ray diffraction, FT-IR, and solid-state (13)C NMR spectroscopy. Highly crystalline cellulose III(I) samples were prepared by treating cellulose samples in supercritical ammonia at 140 degrees C for 1 h, and conventional cellulose III(I) samples were prepared by liquid ammonia treatment. The cellulose IV(I) sample of highest crystallinity was that prepared from Cladophora cellulose III(I) in supercritical ammonia, followed by the sample treated in glycerol at 260 degrees C for 0.5 h, whereas the lowest crystallinity was observed in ramie cellulose prepared by conventional liquid ammonia treatment followed by glycerol annealing. In general, the perfection of cellulose IV(I) depends on the crystallinity of the original material: either of the starting cellulose I or of the cellulose III(I) after ammonia treatment. The product thus obtained was analogous to cellulose I(beta), which is what it should be called rather than cellulose IV(I). If the existence of the polymorph cellulose IV(I) is not accepted, the observations on which it has been based may be explained by the fact that the structure termed cellulose IV(I) is cellulose I(beta) which contains lateral disorder.     

Pyrolysis of cellulose

Pyrolysis of cellulose under vacuum and atmospheric pressure gave a tar containing various amounts of 1,6-anhydro-β-D-glucopyranose, 1,6-anhydro-β-D-glucofuranose, α- and β-D-glucose, 3-deoxy-D-erythro-hexosulose, oligo- and polysaccharides, and some dehydration products. The polysaccharide fraction had no reducing end-group, was randomly linked, contained some furanoid rings, and was very similar to the polysaccharide condensation-product of 1,6-anhydro-β-D-glucose. These results are consistent with a series of inter- and intra-molecular transglycosylation and dehydration and rehydration reactions.     

Chemoreception for cellulose

Rats that had been trained to avoid a suspension containing1% purified cellulose, subsequently avoided suspensions containingas little as 0.1% cellulose, but did not avoid suspensions containingcom, wheat or rice starch. Subsequent experiments examined thebasis for this unusual form of chemoreception. Viscosity measurementsindicated that cellulose and starch have similar effects ofviscosity; the suspending agent used in these experiments, xanthangum, masked much of the textural effects of cellulose or starchin water. Therefore, it does not seem likely that rats sensecellulose via its textural effects. On the other hand, ratsthat had been trained to avoid cellulose suspensions, also avoidedaqueous extracts of cellulose that had been filtered to removecellulose particles. This result suggests that a water-solubleimpurity contributes to cellulose chemoreception. This water-solubleimpurity could be washed off cellulose with water, but returnedafter the washed cellulose was dried. It is likely that cellulosereacts with the atmosphere to produce small amounts of water-solublecompounds that rats can sense     

Manufacture of cellulose nanocrystals by cation exchange resin-catalyzed hydrolysis of cellulose

Cellulose nanocrystals (CNC) were prepared from microcrystalline cellulose (MCC) by hydrolysis with cation exchange resin (NKC-9) or 64% sulfuric acid. The cation exchange resin hydrolysis parameters were optimized by using the Box–Behnken design and response surface methodology. An optimum yield (50.04%) was achieved at a ratio of resin to MCC (w/w) of 10, a temperature of 48 °C and a reaction time of 189 min. Electron microscopy (EM) showed that the diameter of CNCs was about 10–40 nm, and the length was 100–400 nm. Regular short rod-like CNCs were obtained by sulfuric acid hydrolysis, while long and thin crystals of cellulose were obtained with the cation exchange resin. X-ray diffraction (XRD) showed that, compared with MCC, the crystallinity of H₂SO₄-CNC and resin-CNC increased from 72.25% to 77.29% and 84.26%, respectively. The research shows that cation exchange resin-catalyzed hydrolysis of cellulose could be an excellent method for manufacturing of CNC in an environmental-friendly way.     

Cellulase adsorption-desorption and cellulose saccharification during enzymatic hydrolysis of cellulose materials

Treatment of different cellulose materials with cellulase from Penicillium funiculosum showed a cellulase adsorption-desorption pattern on all materials. The relative rate of adsorption and saccharification (enzyme activity) increases with increasing temperature. At 60° cellulase adsorption increased while the enzyme activity decreased.     

Preparation of cellulose films from solution of bacterial cellulose in NMMO

Bacterial cellulose (BC) was dissolved in N-methylmorpholine N-oxide (NMMO) to prepare regenerated BC films (RBC) with phase inversion. The solubility of BC, supermolecule on structure, morphology, thermal and physical properties of the films were investigated by Fourier transform infrared spectroscopy (FT-IR), solid-state cross polarization/magic angle spinning ¹³C nuclear magnetic resonance (CP/MAS ¹³C NMR), wide-angle X-ray diffraction (WAXD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The investigation suggested BC was dissolved completely in NMMO. From the C₆ signal shifts to the amorphous area, the crystallinity of materials decreased from 79.20% to 38.17%, and the transformation from cellulose I to II occurred. It was also found that the banded structure of the native materials was replaced by homogeneous and densified sections, so RBC films had better mechanical and barrier properties, and do thermal stability was similar to that of the native BC.     

Kinetic study on enzymatic hydrolysis of cellulose by cellulose from Trichoderma viride

Pure cellulose (Avicel) was hydrolyzed batchwise at 50 degrees C and pH 4.8 by cellulase from Trichoderma viride (Meicelase CEP). Then the effects of the crystallinity of cellulose as well as the thermal deactivation and product (cellubiose and glucose) inhibition to cellulose on the hydrolysis rate were quantitatively investigated. While these factor had evidently retarded the enzymatic hydrolysis of cellulose to a significant extent, the hydrolysis rates observed could not be explained. For practical purposes, an empirical, simple rate expression was developed which included only one parameter: a overall rate retardation constant. This empirical rate expression held for the hydrolysis of at least two kind of cellulosic materials: Avicel and tissue paper.     

Multiple cellulose synthase catalytic subunits are required for cellulose synthesis in Arabidopsis

The irregular xylem 1 (irx1) mutant of Arabidopsis has a severe deficiency in the deposition of cellulose in secondary cell walls, which results in collapsed xylem cells. This mutation has been mapped to a 140-kb region of chromosome 4. A cellulose synthase catalytic subunit was found to be located in this region, and genomic clones containing this gene complemented the irx1 mutation. IRX1 shows homology to a previously described cellulose synthase (IRX3). Analysis of the irx1 and irx3 mutant phenotypes demonstrates that both IRX1 and IRX3 are essential for the production of cellulose in the same cell. Thus, IRX1 and IRX3 define distinct classes of catalytic subunits that are both essential for cellulose synthesis in plants. This finding is supported by coprecipitation of IRX1 with IRX3, suggesting that IRX1 and IRX3 are part of the same complex.     

细菌纤维素的研究进展

细菌纤维素是由醋酸杆菌属、根瘤菌属、土壤杆菌属、八叠球菌属等的某些细菌在一定条件下产生的,其中最有代表性的细菌是木醋杆菌。与传统植物纤维素相比,细菌纤维素具有很高的化学纯度。主要介绍细菌纤维素性质、生物合成的方法及其在食品工业、造纸工业和作为一种生物材料在医学工程等方面的应用。     

Higher plant cellulose synthases

Cellulose, an aggregate of unbranched polymers of β-1,4-linked glucose residues, is the major component of wood and thus paper, and is synthesized by plants, most algae, some bacteria and fungi, and even some animals. The genes that synthesize cellulose in higher plants differ greatly from the well-characterized genes found in Acetobacter and Agrobacterium sp. More correctly designated as 'cellulose synthase catalytic subunits', plant cellulose synthase (CesA) proteins are integral membrane proteins, approximately 1,000 amino acids in length. The sequences for more than 20 full-length CesA genes are available, and they show high similarity to one another across the entire length of the encoded protein, except for two small regions of variability. There are a number of highly conserved residues, including several motifs shown to be necessary for processive glycosyltransferase activity. No crystal structure is known for cellulose synthase proteins, and the exact enzymatic mechanism is unknown. There are a number of mutations in cellulose synthase genes in the model organism Arabidopsis thaliana. Some of these mutants show altered morphology due to the lack of a properly developed primary or secondary cell wall. Others show resistance to well-characterized cellulose biosynthesis inhibitors.