褐菖■精细胞晚期的变化及精子结构研究

本文研究卵胎生硬骨鱼褐菖（Ｓｅｂａｓｔｉｓｃｕｓｍａｒｍｏｒａｔｕｓ）精细胞的成熟变化和精子结构。褐菖精细胞发育晚期已具有硬骨鱼类精子的结构雏形：细胞核的背面较平坦,腹面稍外鼓,呈弧面;染色质浓缩成团块状,核的腹侧和后端的染色质较致密;中心粒复合体由近端中心粒和基体组成,近端中心粒和基体排成“Ｌ”形;近端中心粒向细胞核的背侧伸出中心粒附属物,中心粒附属物由９条微管组成,９条微管围成一筒状结构,类似轴丝。在晚期精细胞形成精子的过程中,中心粒附属物和近端中心粒相继退缩以至消失不见,同时细胞核后端的形状也随着发生变化。中心粒附属物和近端中心粒的相继消失可以看作是成熟的最后标志。精子的中心粒复合体由基体及其上方的基体帽组成,袖套接于核的后端,其中约有３０～４０个线粒体;鞭毛从袖套腔中伸出,鞭毛的中心结构是轴丝;轴丝外方为细胞质形成的侧鳍,在鞭毛的近核段,轴丝两侧的侧鳍较宽且不对称。     

Ultrastructural changes during zoospore formation in phytophthora parasitica

Cleavage of the multinucleate sporangial cytoplasm begins by a rearrangement and subsequent fusion of randomly dispersed cleavage vesicles. The vesicles line up in planes equidistant from neighboring nuclei and along the sporangial wall. In addition, they contribute to the enlargement of the central vacuole. Fusion of these vesicles with themselves and with the central vacuole cleaves the cytoplasm into uninucleate zoospores, each with two flagella. The sporangial wall consists of two layers, an outer thin one which is continuous over the plug of the discharge pore and an inner thick one which tapers off near the plug. The plug consists of fibrillar material and is ejected upon release of the zoospores. A plug-like structure separating the forming sporangium from the hypha has a homogeneous matrix pervaded with an anastomosing network of fine electron-dense channels. In addition, glycogen-like granules occur within mitochondria and paired structures are interpreted as procentrioles.     

Behavior of beef-heart cytochrome c oxidase in reconstituted proteovesicles. A systemtic evaluation of the influence of phospholipid polar headgroup and fatty-acyl side chains

1. Phospholipid-depleted cytochrome c oxidase is incorporated in vesicles, built up of phospholipids of known polar headgroup and fatty-acyl side chains. 2. Maximal reactivation is obtained only when the fatty-acyl side chains provide a fluid environment. 3. Fluid zwitterionic phospholipids are found to be more efficient reactivators than fluid anionic ones. 4. Irrespective of the polar headgroup type, two narrow ranges of activation energies for the enzymatic reaction are calculated from the Arrhenius plots: 81--92 kJ/mol in solid and 51--61 kJ/mol in fluid conditions. 5. Cytochrome c oxidase is also incorporated in a series of vesicles, each built up of an equimolar amount of two phospholipids which differ in their polar headgroup type and/or their fatty-acyl side chain characteristics. From the localization of the enzyme activity profiles, obtained with these mixtures, tentative deductions are made about the preference of cytochrome c oxidase for different phospholipid molecules.     

Organization of Subunits in the Membrane Domain of the Bovine F-ATPase Revealed by Covalent Cross-linking

The F-ATPase in bovine mitochondria is a membrane-bound complex of about 30 subunits of 18 different kinds. Currently, ∼85% of its structure is known. The enzyme has a membrane extrinsic catalytic domain, and a membrane intrinsic domain where the turning of the enzyme''s rotor is generated from the transmembrane proton-motive force. The domains are linked by central and peripheral stalks. The central stalk and a hydrophobic ring of c-subunits in the membrane domain constitute the enzyme''s rotor. The external surface of the catalytic domain and membrane subunit a are linked by the peripheral stalk, holding them static relative to the rotor. The membrane domain contains six additional subunits named ATP8, e, f, g, DAPIT (diabetes-associated protein in insulin-sensitive tissues), and 6.8PL (6.8-kDa proteolipid), each with a single predicted transmembrane α-helix, but their orientation and topography are unknown. Mutations in ATP8 uncouple the enzyme and interfere with its assembly, but its roles and the roles of the other five subunits are largely unknown. We have reacted accessible amino groups in the enzyme with bifunctional cross-linking agents and identified the linked residues. Cross-links involving the supernumerary subunits, where the structures are not known, show that the C terminus of ATP8 extends ∼70 Å from the membrane into the peripheral stalk and that the N termini of the other supernumerary subunits are on the same side of the membrane, probably in the mitochondrial matrix. These experiments contribute significantly toward building up a complete structural picture of the F-ATPase.     

Phospholipids occupy the internal lumen of the c ring of the ATP synthase of Escherichia coli

The occupancy of the central cavity of the membrane-embedded c ring of the ATP synthase of Escherichia coli was investigated with a photo-cross-linking approach. Single cysteine mutants were created at c subunit positions 4, 8, and 11, which are oriented to the inside of the ring. These cysteines were alkylated with reagents carrying a photoactivatable substituent and illuminated. Subunit c and derivatives were then isolated and subjected to mass spectrometric analyses. The most noticeable product, which was found exclusively in irradiated samples, had a mass increase of 719 Da, consistent with a cross-link product between the substituted c subunit and phosphatidylethanolamine. Digestion with phospholipase C converted this product into one with a mass diminished by 126 Da, indicating that the phosphoethanolamine moiety was cleaved off. Hence, the cross-link forms to the diacylglycerol moiety of phosphatidylethanolamine. Control experiments showed that the subunit c-phospholipid adducts were formed in the ATP synthase complex in its natural membrane environment and were not artifacts arising from monomeric c subunits. We conclude therefore that the inner lumen of the c ring is occupied with phospholipids. No evidence was found for an extension of subunit a into this space.     

THE RELATIONSHIP BETWEEN THE FINE STRUCTURE AND DIRECTION OF BEAT IN GILL CILIA OF A LAMELLIBRANCH MOLLUSC

This paper describes the fine structure and its relationship to the direction of beat in four types of cilia on the gill of the fresh-water mussel Anodonta cataracta. The cilia contain nine outer, nine secondary, and two central fibers, such as have been described previously in other material. Each outer fiber is a doublet with one subfiber bearing arms. One particular pair of outer fibers (numbers 5 and 6) are joined together by a bridge. The two central fibers are enclosed by a central sheath; also present in this region is a single, small mid-fiber. The different groups of fibers are connected together by radial links that extend from the outer to the secondary fibers, and from the secondary fibers to the central sheath. The basal body consists of a cylinder of nine triplet fibers. Projecting from it on one side is a dense conical structure called the basal foot. The cylinder of outer fibers continues from the basal body into the cilium, passing through a complex transitional region in which five distinct changes of structure occur at different levels. There are two sets of fibers associated with the basal bodies: a pair of striated rootlets that extends from each basal body down into the cell, and a system of fine tubular fibers that runs parallel to the cell surface. The relationship between fine structure and direction of beat is the same in all four types of cilia examined. The plane of beat is perpendicular to the plane of the central fibers, with the effective stroke toward the bridge between outer fibers 5 and 6, and toward the foot on the basal body.     

Differential cell enlargement and its possible implication for resupination in Lemboglossum bictoniense (Orchidaceae)

Changes in the structural features of cell populations in the pedicel of Lemboglossum bictoniense (Bateman ex. Lindley) Halbinger were examined by means of light microscopy in relation to resupination, a twisting of the pedicel through 180^o prior to flower opening. Serial sections in transverse and longitudinal planes were taken from pre-resupinate and fully resupinate pedicels of flowers from a single inflorescence, and comparisons made between the tissues. The pedicel is a prismatic cylinder flattened on three sides, producing three distinct ribS. Each rib contains one central vascular bundle enclosed by cortical parenchyma. Intervening cortical parenchyma forms flanks external to a central core of three vascular bundles, each of which is split into three distinct traces at this level. Resupination is accompanied by axial and radial expansion of cortical parenchyma. Specialized raphide-bearing cells in the cortex expand axially doubling their length in the ground parenchyma. These raphide cells are localized in the rib cortex, and their expansion is reflected in greater elongation of the ribs relative to flank areas. The extra rib length is accommodated by a lateral displacement (twisting) of the ribs around the central axis of the pedicel. Tissue distortion is reduced by cell division, expansion of intercellular spaces and a radial contraction of pith parenchyma. Raphide cell elongation could be a contributing factor in pedicel twisting. The direction of resupination may be controlled by the organization of these cells into arcs on one or other side of the rib vascular bundle.     

Structural insights into the secretin PulD and its trypsin-resistant core

Limited proteolysis, secondary structure and biochemical analyses, mass spectrometry, and mass measurements by scanning transmission electron microscopy were combined with cryo-electron microscopy to generate a three-dimensional model of the homomultimeric complex formed by the outer membrane secretin PulD, an essential channel-forming component of the type II secretion system from Klebsiella oxytoca. The complex is a dodecameric structure composed of two rings that sandwich a closed disc. The two rings form chambers on either side of a central plug that is part of the middle disc. The PulD polypeptide comprises two major, structurally quite distinct domains; an N domain, which forms the walls of one of the chambers, and a trypsin-resistant C domain, which contributes to the outer chamber, the central disc, and the plug. The C domain contains a lower proportion of potentially transmembrane beta-structure than classical outer membrane proteins, suggesting that only a small part of it is embedded within the outer membrane. Indeed, the C domain probably extends well beyond the confines of the outer membrane bilayer, forming a centrally plugged channel that penetrates both the peptidoglycan on the periplasmic side and the lipopolysaccharide and capsule layers on the cell surface. The inner chamber is proposed to constitute a docking site for the secreted exoprotein pullulanase, whereas the outer chamber could allow displacement of the plug to open the channel and permit the exoprotein to escape.     

Conformational dynamics of the plug domain of the SecYEG protein-conducting channel

The central pore of the SecYEG preprotein-conducting channel is closed at the periplasmic face of the membrane by a plug domain. To study its conformational dynamics, the plug was labeled site-specifically with an environment-sensitive fluorophore. In the presence of a stable preprotein translocation inter-mediate, the SecY plug showed an enhanced solvent exposure consistent with a displacement from the hydrophobic central pore region. In contrast, binding and insertion of a ribosome-bound nascent membrane protein did not alter the plug conformation. These data indicate different plug dynamics depending on the ligand bound state of the SecYEG channel.     

Residence time distributions of gas flowing through rotating drum bioreactors

Residence time distribution studies of gas through a rotating drum bioreactor for solid-state fermentation were performed using carbon monoxide as a tracer gas. The exit concentration as a function of time differed considerably from profiles expected for plug flow, plug flow with axial dispersion, and continuous stirred tank reactor (CSTR) models. The data were then fitted by least-squares analysis to mathematical models describing a central plug flow region surrounded by either one dead region (a three-parameter model) or two dead regions (a five-parameter model). Model parameters were the dispersion coefficient in the central plug flow region, the volumes of the dead regions, and the exchange rates between the different regions. The superficial velocity of the gas through the reactor has a large effect on parameter values. Increased superficial velocity tends to decrease dead region volumes, interregion transfer rates, and axial dispersion. The significant deviation from CSTR, plug flow, and plug flow with axial dispersion of the residence time distribution of gas within small-scale reactors can lead to underestimation of the calculation of mass and heat transfer coefficients and hence has implications for reactor design and scale-up.     

Membrane location of spin-labeled cytochrome c determined by paramagnetic relaxation agents

The mitochondrial protein horse heart cytochrome c was specifically spin-labeled with succinimidyl-2,2,5, 5-tetramethyl-3-pyrroline-1-oxyl-carboxylate on different lysine residues at positions 86, 87, 72, 8, or 25, respectively. Site-specifically labeled species were separated chromatographically and identified by peptide sequencing of tryptic digests. The monolabeled protein was bound to negatively charged phospholipid membranes composed of dioleoylphosphatidylglycerol, and the accessibility of the spin-labeled lysine residues to lipid-soluble molecular oxygen and to lipid-impermeant chromium maltolate was determined from the saturation properties of the ESR spectra. The accessibilities of the spin-labeled proteins relative to those obtained for phospholipids spin-labeled in the headgroup region, in the presence of unlabeled protein, identify the position of the spin-labeled lysine residues relative to the phospholipid bilayer surface. We have found that cytochrome c does not penetrate into the membrane interior and that the active side of cytochrome c in the protein-membrane interaction is the side on which lys86, lys87, and lys72 are located.     

Photoelectrospectrometry of bilayer lipid membranes

Three different bilayer lipid membrane systems were studied under visible and ultraviolet illumination. The first system consisted of a bilayer lipid membrane formed with a mixture of phospholipids and cholesterol, to one side of which purple membrane fragments from Halobacterium halobium were added. The second system consisted of a membrane formed from spinach chloroplast extract. When either of these membrane systems was illuminated with ultraviolet and visible radiation, photopotentials were observed and photoelectric action spectra were recorded (the technique is termed photoelectrospectrometry). Each spectrum had a definite structure which was characteristic of each of the modified membranes. The third system studied consisted of an otherwise photoinactive membrane formed with a mixture of phospholipids and cholesterol, to one side of which chymotrypsin was added. When the membrane was illuminated with visible light no photoresponse was observed. On the other hand, a photopotential which increased with incubation time was observed when the membrane was illuminated with ultraviolet light. Since, in our systems, the photoresponses have been observed to be due to certain species incorporated into the membrane, it appears that photoelectrospectrometry is a useful tool for studying lipid-protein interactions, constituent organization and energy transfer in membranes.     

Variation in development of rat embryos at the presomite period.

Rat embryos at a single gestational time in the presomite period were studied for their variation in development and their fate after culture. They were explanted at 8 A.M. on day 9 of gestation from timed-pregnant Sprague-Dawley rats which were obtained by mating between 8 and 10 A.M. (plug day = day 0). In the first experiment, a total of 203 embryos from 20 litters were examined for their variation in development. Several dimensions of embryo/egg cylinder were measured and development of various embryonic/extraembryonic structures were assessed using a scoring system that we developed for the present study. Embryos were then divided into different stages of development based on their scores using the staging system that we developed previously. A large variation in developmental stage was demonstrated; the youngest embryo was at the early primitive streak stage with no signs of amniotic folds and the oldest one was at the late neural plate stage with a foregut pocket but without visible somites. No strong correlation was demonstrated between developmental stage and size of embryo/egg cylinder, nor between developmental stage and development of the proamniotic tube, ectoplacental cavity, or allantois. In the second experiment, embryos were explanted at the same time and those at different stages were cultured separately in rotating bottles and their outcomes were compared after 49 hours. The difference in mean somites number of embryos cultured from the mid primitive streak and late neural plate stages was 6.1. This difference corresponds to approximately 10 hours based on the known linear increase of somites number on day 11 of approximately 0.6 somites per hour. These results indicate a large variation in development of presomite period embryos supposedly of the same gestational age and suggest the importance of careful staging at the time of explantation if precision is needed for whole embryo culture experiments.     

None of the Rotor Residues of F1-ATPase Are Essential for Torque Generation

F₁-ATPase is a powerful rotary molecular motor that can rotate an object several hundred times as large as the motor itself against the viscous friction of water. Forced reverse rotation has been shown to lead to ATP synthesis, implying that the mechanical work against the motor’s high torque can be converted into the chemical energy of ATP. The minimal composition of the motor protein is α₃β₃γ subunits, where the central rotor subunit γ turns inside a stator cylinder made of alternately arranged α₃β₃ subunits using the energy derived from ATP hydrolysis. The rotor consists of an axle, a coiled coil of the amino- and carboxyl-terminal α-helices of γ, which deeply penetrates the stator cylinder, and a globular protrusion that juts out from the stator. Previous work has shown that, for a thermophilic F₁, significant portions of the axle can be truncated and the motor still rotates a submicron sized bead duplex, indicating generation of up to half the wild-type (WT) torque. Here, we inquire if any specific interactions between the stator and the rest of the rotor are needed for the generation of a sizable torque. We truncated the protruding portion of the rotor and replaced part of the remaining axle residues such that every residue of the rotor has been deleted or replaced in this or previous truncation mutants. This protrusionless construct showed an unloaded rotary speed about a quarter of the WT, and generated one-third to one-half of the WT torque. No residue-specific interactions are needed for this much performance. F₁ is so designed that the basic rotor-stator interactions for torque generation and control of catalysis rely solely upon the shape and size of the rotor at very low resolution. Additional tailored interactions augment the torque to allow ATP synthesis under physiological conditions.     

Torque generation in F1-ATPase devoid of the entire amino-terminal helix of the rotor that fills half of the stator orifice

F₁-ATPase is an ATP-driven rotary molecular motor in which the central γ-subunit rotates inside a cylinder made of α₃β₃ subunits. The amino and carboxyl termini of the γ rotor form a coiled coil of α-helices that penetrates the stator cylinder to serve as an axle. Crystal structures indicate that the axle is supported by the stator at two positions, at the orifice and by the hydrophobic sleeve surrounding the axle tip. The sleeve contacts are almost exclusively to the longer carboxyl-terminal helix, whereas nearly half the orifice contacts are to the amino-terminal helix. Here, we truncated the amino-terminal helix stepwise up to 50 residues, removing one half of the axle all the way up and far beyond the orifice. The half-sliced axle still rotated with an unloaded speed a quarter of the wild-type speed, with torque nearly half the wild-type torque. The truncations were made in a construct where the rotor tip was connected to a β-subunit via a short peptide linker. Linking alone did not change the rotational characteristics significantly. These and previous results show that nearly half the normal torque is generated if rotor-stator interactions either at the orifice or at the sleeve are preserved, suggesting that the make of the motor is quite robust.     

Heart inflow tract of the African lungfish Protopterus dolloi

We report a morphologic study of the heart inflow tract of the African lungfish Protopterus dolloi. Attention was paid to the atrium, the sinus venosus, the pulmonary vein, and the atrioventricular (AV) plug, and to the relationships between all these structures. The atrium is divided caudally into two lobes, has a common part above the sinus venosus, and appears attached to the dorsal wall of the ventricle and outflow tract through connective tissue covered by the visceral pericardium. The pulmonary vein enters the sinus venosus and runs longitudinally toward the AV plug. Then it fuses with the pulmonalis fold and disappears as an anatomic entity. However, the oxygenated blood is directly conveyed into the left atrium by the formation of a pulmonary channel. This channel is formed cranially by the pulmonalis fold, ventrally by the AV plug, and caudally and dorsally by the atrial wall. The pulmonalis fold appears as a wide membranous fold which arises from the left side of the AV plug and extends dorsally to form the roof of the pulmonary channel. The pulmonalis fold also forms the right side of the pulmonary channel and sequesters the upper left corner of the sinus venosus from the main circulatory return. The AV plug is a large structure, firmly attached to the ventricular septum, which contains a hyaline cartilaginous core surrounded by connective tissue. The atrium is partially divided into two chambers by the presence of numerous pectinate muscles extended between the dorsal wall of the atrium and the roof of the pulmonary channel. Thus, partial atrial division is both internal and external, precluding the more complete division seen in amphibians. The present report, our own unpublished observations on other Protopterus, and a survey of the literature indicate that not only the Protopterus, but also other lungfish share many morphologic traits.     

Interactions of tocopherols and ubiquinones with monolayers of phospholipids.

1. The penetration of alpha-tocopherol and seven of its derivatives, and five compounds in the ubiquinone series, having differing chain lengths, into monolayers at the air/water interface of 11 different synthetic phospholipids and cholesterol was investigated; the properties of mixed monolayers of the tocopherols and of ubiquinones with phospholipids were also studied. 2. Penetration of alpha-tocopherol into diarachidonylglycerylphosphorycholine was approximately constant for molar ratios of tocopherol/phospholipid ranging from 0.4:1.0 to 2.0:1.0. 3. Tocopherols with shorter or longer side chains than alpha-tocopherol had a lesser ability to penetrate monolayers of phospholipid molecules with 16 or more carbon atoms in their acyl chains. 4. All the tocopherols penetrated more readily as unsaturation in the phospholipids was increased, and their penetration into mixed monolayers of phospholipids was greatly facilitated by the presence of relatively small quantities of unsaturated phospholipid molecules. 5. There was relatively little interaction between the tocopherols and cholesterol, or between the ubiquinones and phospholipids. 6. The possible significance of the observed interactions between alpha-tocopherol and polyunsaturated phospholipids is discussed in relation to the biochemical actions of alpha-tocopherol in vivo. 7. It is suggested that fluidity of the lipid bilayer in membranes containing polyunsaturated phospholipids may allow alpha-tocopherol to interact in a dynamic manner with a number of phospholipid molecules.     

Substance P as a factor enhancing resistance of the surfactant lung system to chronic immobilization stress

In chronic experiments on non-line white rats the influence of system (intraperitoneal) and central (into the lateral brain ventricle) administration of substance P on lung surfactant system was studied in stressed and non-stressed animals. A single injection of substance P limited pulmonary surfactant activity disorders in immobilisation stress. Stress-induced increase of phospholipids level in broncho-alveolar lavage fluid remained the same in intracerebroventricular administration and was partly reduced in intraperitoneal one. In intact rats, a single injection of peptide was accompanied by alveolar phospholipids accumulation. In rabbits, multiple intracerebroventricular injections of substance P enhanced the opposite effect.     

Refined atomic model of glutamine synthetase at 3.5 A resolution

An atomic model of 43,692 non-hydrogen atoms has been determined for the 12-subunit enzyme glutamine synthetase from Salmonella typhimurium, by methods of x-ray diffraction including restrained least-squares atomic refinement against 65,223 unique reflections. At 3.5 A resolution the crystallographic R-factor (on 2 sigma data) is 25.8%. As reported earlier for the unrefined structure, the 12 subunits are arranged in two layers of six; at the interface of pairs of subunits within each layer, cylindrical active sites are formed by six anti-parallel beta strands contributed by one subunit and two strands by the neighboring subunit. This interpretation of the electron density map has now been supported by comparison with glutamine synthetase from Escherichia coli by the Fourier difference method. Each active site cylinder holds two Mn2+ ions, with each ion having as ligands three protein side chains and two water molecules (one water shared by both metals), as well as a histidyl side chain just beyond liganding distance. The protein ligands to Mn2+ 469 are Glu-131, Glu-212, and Glu-220; those to Mn2+ 470 are Glu-129, His-269, and Glu-357. The two layers of subunits are held together largely by the apolar COOH terminus, a helical thong, which inserts into a hydrophobic pocket formed by two neighboring subunits on the opposite ring. Also between layers, there is a hydrogen-bonded beta sheet interaction, as there is between subunits within a ring, but hydrophobic interactions account for most of the intersubunit stability. The central loop, which extends into the central aqueous channel, is subject to attack by at least five enzymes and is discussed as an enzyme "passive site."     

Molecular motors of the bacterial flagella

The bacterial flagellum, which is responsible for motility, is a biological nanomachine consisting of a reversible rotary motor, a universal joint, a helical screw, and a protein export apparatus dedicated for flagellar assembly. The motor is fueled by an inward-directed electrochemical gradient of protons or sodium ions across the cytoplasmic membrane. The motor consists of a rotor, a drive shaft, a bushing, and about a dozen stator units. The flagellar protein export apparatus is located at the cytoplasmic side of the rotor. Interactions between the rotor and the stators and those between soluble and membrane components of the export apparatus are highly dynamic. The structures of flagellar basal body components including those of the export apparatus, being revealed at high resolution by X-ray crystallography and electron cryomicroscopy and cryotomography, are giving insights into their mechanisms.