Fast and sensitive silver staining of DNA in polyacrylamide gels.

The photochemically derived silver stain of nucleic acids in polyacrylamide gels originally described by Merril et al. (1981, Science 211, 1437-1438) was modified to reduce unspecific background staining and increase sensitivity (down to 1 pg/mm2 band cross-section). Detection limits for double-stranded DNA fragments from HaeIII endonuclease digests of phage phi X174 were maintained despite eliminating oxidation pretreatment of fixed gels and reducing silver nitrate concentration. Preexposure to formaldehyde during silver impregnation enhanced sensitivity and the inclusion of the silver-complexing agent sodium thiosulphate in the image developer decreased background staining. Higher formaldehyde concentration during image development resulted in darker bands with good contrast. The procedure almost halves the number of steps, solutions and experimental time required and can be used for the staining of DNA fragments in polyacrylamide gels bound to a polyester backing film by controlling temperature during image development. We have applied this improved staining procedure for the routine analysis of complex DNA profiles generated by DNA amplification fingerprinting (DAF).     

Detection of a few picograms of DNA on polyacrylamide gels by silver staining

DNA fragments separated on polyacrylamide gels are silver stained in ethanolamine solution. The staining procedure can be completed in 3 1/2 h. Illumination of the gels on a black background increases the sensitivity of detection compared with the usual transillumination. The limit level of detection is 3-5 pg per band with a cross-sectional area of 5 mm2. Five to fifty picograms of DNA may be detected quantitatively by scanning the gels. The method will detect 0.1 to 1 ng per band of low-molecular-weight RNA components.     

Detection of protein in polyacrylamide gels using an improved silver stain

A much improved silver staining procedure for the detection of protein in polyacrylamide gels of 0.8-3.0 mm thickness is described. It achieves very high sensitivity (detecting less than 0.01 ng bovine serum albumin/mm2) by overstaining and subsequently removing nonspecific background stain using a modified, reliable destaining procedure. Maximum sensitivity follows prediamine equilibration in 0.1% (w/v) formaldehyde solution. With two-dimensional electrophoresis the improved staining procedure reveals greater than 200 polypeptides in unconcentrated human urine and greater than 150 polypeptides in a single human fingerprint.     

Detection of single sequence repeat polymorphisms in denaturing polyacrylamide sequencing gels by silver staining

Large-scale use of molecular markers in plant breeding is limited by the throughput capacity for genotyping. DNA polymorphisms can be detected in denaturing polyacrylamide gels indirectly by nucleotide labeling or directly by staining. Fluorescent-labeling or radiolabeling requires sophisticated infrastructure not always available in developing countries. We present an improved low-cost method for silver staining and compare it to 2 other methods for their ability to detect simple sequence repeat polymorphisms in denaturing polyacrylamide gels bound to glass plates. The 3 procedures differed in their requirement for an oxidation pretreatment, preexposure with formaldehyde during silver nitrate impregnation, inclusion of silver thiosulfate, and by their replacement of sodium carbonate for sodium hydroxide to establish alkaline conditions for silver ion reduction. All methods detected the same banding pattern and alleles. However, important differences in sensitivity, contrast, and background were observed. Two methods gave superior sensitivity, detecting down to 1 μL of loaded amplification products. Our improved method gave lower backgrounds and allowed reutilization of staining solutions. The use of thin (<1 mm) denaturing sequencing gels allows genotyping of 60–96 samples within 4 h. Use of smaller loading sample volumes and reutilization of staining solutions further reduced costs.     

Selective silver staining of urease activity in polyacrylamide gels

A selective method for staining urease activity bands in nondenaturing polyacrylamide gels is described. It is based on the deposition of silver at the urease bands after incubation of gels in the presence of urea and photographic developers. Its highly sensitivity (up to 0.015 enzyme units, corresponding to 5 ng of purified urease) is based on both the silver deposition enhancement methodology and the developers used. The selectivity of the procedure is based on the local pH increase catalytically produced by the enzyme in the presence of urea. The densitometric scan of the enzyme bands gives a linear response at least in the range 0.015-0.300 urease units. This selective staining method is about 2.5 times more sensitive than the standard silver staining of proteins, in terms of detectable urease amount.     

Oxalate pretreatment and use of a physical developer render the Kossa method selective and sensitive for calcium

Summary Based on experiments on agarose gels and tissue, a procedure has been developed which greatly improves the sensitivity and the specifity of the Kossa method for demonstrating calcium in tissue. Tissue calcium is immobilized by acetonic oxalic acid, which simultaneously removes the other sorts of anions capable of precipitating silver ions (e.g. phosphate, carbonate). The resulting submicroscopic grains of calcium oxalate are converted first into silver oxalate then into metallic silver by a treatment with silver nitrate followed by an ultra-violet irradiation (Kossa reaction). These submicroscopic metallic silver grains are enlarged up to microscopic visibility by means of physical development, which makes the staining highly sensitive. Costaining of the argyrophil sites in the tissue is totally suppressed by various tricks, which render the silver staining selective for calcium.     

Oxalate pretreatment and use of a physical developer render the Kossa method selective and sensitive for calcium

Based on experiments on agarose gels and tissue, a procedure has been developed which greatly improves the sensitivity and the specifity of the Kossa method for demonstrating calcium in tissue. Tissue calcium is immobilized by acetonic oxalic acid, which simultaneously removes the other sorts of anions capable of precipitating silver ions (e.g. phosphate, carbonate). The resulting submicroscopic grains of calcium oxalate are converted first into silver oxalate then into metallic silver by a treatment with silver nitrate followed by an ultra-violet irradiation (Kossa reaction). These submicroscopic metallic silver grains are enlarged up to microscopic visibility by means of physical development, which makes the staining highly sensitive. Co-staining of the argyrophil sites in the tissue is totally suppressed by various tricks, which render the silver staining selective for calcium.     

Lipopolysaccharide-free Escherichia coli OmpF and Pseudomonas aeruginosa protein P porins are functionally active in lipid bilayer membranes.

Escherichia coli porin OmpF and Pseudomonas aeruginosa porin protein P were eluted from sodium dodecyl sulfate-polyacrylamide gels. The resultant porin preparations were found to be devoid of detectable lipopolysaccharide (LPS) by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and silver staining for LPS, direct enzyme-linked immunosorbent assays with LPS-specific monoclonal antibodies, and 2-keto-3-deoxyoctulosonic acid assays. The average conductances, ionic selectivities and incorporation rates of the electroeluted porins were identical to those of their conventionally purified counterparts. These data suggest that LPS is not required per se for porin function.     

A new silver staining apparatus and procedure for matrix-assisted laser desorption/ionization-time of flight analysis of proteins after two-dimensional electrophoresis

We report on a new silver stain especially developed for staining large gels (25 cm x 20 cm) from the Hoefer ISO-DALT system for matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis of proteins. The staining protocol can be summarized as follows: the gels are sensitised in tetrathionate/potassium acetate solution and washed several times in distilled water. After impregnation with silver nitrate, the silver is reduced in the presence of potassium carbonate, thiosulphate and formaldehyde. The staining procedure is stopped with Tris/acetate after which the gels are rinsed and stored in water before spot picking for MALDI-TOF analysis is performed. This protocol has several advantages over existing ones. The gels are stained in a new apparatus that reduces gel handling to a minimum thus also reducing the contamination with keratins to a minimum. The development times in potassium carbonate are very long (up to 40 min) thus improving batch-to-batch reproducibility. Only the surface of the proteins is stained and the silver can be oxidized, thereafter MALDI-TOF can be performed with protein loads as little as 100 micrograms per gel.     

Sensitive colloidal metal (gold or silver) staining of protein blots on nitrocellulose membranes

A sensitive staining method for protein blots on nitrocellulose membranes is described and compared with commonly used dye staining methods. It uses colloidal metal sols (gold or silver) stabilized with Tween 20 and adjusted to pH 3. It is based on the selective high-affinity binding of colloidal metal particles to the proteins and produces a red-purplish color (gold) or dark grey (silver). The sensitivity of this new staining method is in the same range as silver staining of polyacrylamide gels and matches the sensitivity of overlay assays. It will therefore be a useful tool for correlating the position of bands or spots of proteins detected with overlay assays with the complete electropherogram in a duplicate protein blot.     

A highly sensitive technique for staining DNA and RNA in polyacrylamide gels using silver

A technique is described for staining DNA in polyacrylamide gels with silver. It is rapid, requiring about 30 min for whole staining and development procedure, very simple and at least 20 times more sensitive than ethidium bromide for the staining of double-stranded DNA in polyacrylamide gels. This technique can also be applied for the staining of denatured, single-stranded DNA as well as RNA after their electrophoretic separation on polyacrylamide gels, having the same sensitivity as for double-stranded DNA fragments.     

Avidin- or streptavidin-biotin as a highly sensitive method to stain total protein on membranes

A sensitive method for staining proteins after transfer from polyacrylamide gels to nitrocellulose paper is described. Transferred proteins are first derivatized by reaction of the nitrocellulose replica with sulfosuccinimidobiotin and are then reacted sequentially with streptavidin, rabbit anti-streptavidin, and horseradish peroxidase-conjugated goat anti-rabbit IgG antibody. Incubation with the enzyme substrate α-chloronaphthol, produces dark protein bands against a white background. The binding of streptavidin to the proteins is dependent on biotin derivatization as demonstrated by competition with biotinylated bovine serum albumin or 10 nM biotin. The procedure detects less than 5ng of transferred protein in a single band and is thus 5–10 times more sensitive than horseradish peroxidase-conjugated avidin alone. For bovine serum albumin, the method is comparable in sensitivity to silver staining of protein in polyacrylamide gels.     

A mass spectrometry compatible silver staining method for protein incorporating a new silver sensitizer in sodium dodecyl sulfate-polyacrylamide electrophoresis gels

A quick, sensitive, and MALDI-TOF MS compatible silver staining method, namely Eriochrome black T (EBT)-silver method, is described. The method can detect 0.05-0.2 ng protein within 60 min in SDS-PAGE gels. EBT dye was used as a silver ion sensitizer having reducing power for silver ions.     

Optimization of PCR protocol in microsatellite analysis with silver and SYBR® stains

Here we present the optimization of PCR conditions for microsatellite analysis of coniferous trees. The use of touchdown protocol for annealing resulted in a high success rate for optimization using fewer temperature profiles. The use of SYBR^￠ Green gel stain to detect PCR products in agarose gels was more sensitive than ethidium bromide. This is valuable for determining the success of PCR reactions and estimating the amount of PCR products formed—which is crucial in determining the dilution required to produce bands of similar intensity upon silver staining of the polyacrylamide gels. The use of SYBR^￠ Gold for staining polyacrylamide gels was not satisfactory in terms of the image quality produced. However, it was comparable to silver staining in terms of sensitivity, and could possibly be used in cases where the products are present as sharp single bands. In those cases, the use of SYBR^￠ Gold gel stain would save time and money for staining polyacrylamide gels.     

Yet another improved silver staining method for the detection of proteins in polyacrylamide gels

Silver staining is very sensitive for detection of proteins in polyacrylamide gels and different procedures have been published. By combining and modifying some of the recipes, a very reproducible method, which is based upon staining with diamine complexes of silver, has been developed. The background staining is negligible and reduced silver does not precipitate on the gel surface. The technique works very well for sodium dodecyl sulfate-polyacrylamide gel electrophoresis in both homogeneous and in gradient gels as well as for two-dimensional (2-D) PAGE. It was possible to detect 1-10 ng of protein corresponding to approximately 50 pg/mm2, provided that a discontinuous buffer system was used, which gives sharp bands.     

COMPARISON of ANALYTICAL SENSITIVITIES of THREE ENZYME IMMUNOASSAY PROCEDURES FOR the DETECTION of SALMONELLA LIPOPOLYSACCHARIDE

The analytical sensitivities of three different enzyme linked immunoassays (ELISA), two competitive and a capture format were assessed. the assay systems employed monoclonal antibodies to Salmonella lipopolysaccharide (LPS) outer core epitopes to detect crude LPS antigens from Salmonella typhimurium. the most sensitive ELISA was the capture procedure, being capable of detection 1.3 ng/ml of LPS. This technique, however also gave the greatest between-test variation and as a result, the lowest amount that could be detected with a 95% confidence limit was actually 12.8 ng/ml and it took the longest time to perform (3 h, 30 min). A competitive ELISA using limiting monoclonal antibody to compete between solid phase antigen and soluble antigen in the sample, ranked second in sensitivity, and can detect 2.8 and 3.8 ng/ml of LPS when tested with two different monoclonal antibodies. However, because of the slight between test variation, the actual sensitivities that could be detected with a 95% confidence limit were 3.1 and 4.6 ng/ml, respectively. This test takes approximately 1 h and 30 min to perform.
The classical type of competitive assay, employing a labelled antigen, was the least sensitive being capable of detecting 5.8 ng/ml if the LPS was conjugated with horseradish peroxidase and 16.0 ng/ml if alkaline phosphatase was used as a label. to account for the between-test variation, the sensitivities with a 95% confidence limit were 8.6 and 18.7 ng/ml for the respective assays, which take 2 h and 15 min to perform.
These sensitivities compare favorably with those published for similar assays, but all of the procedures were judged insufficiently sensitive for direct use on food samples to be tested for the presence of Salmonella species. However, the assays would be quite suitable for demonstration of Salmonella sp. after an enrichment procedure.     

Colloidal Silver Staining of Electroblotted Proteins for High Sensitivity Peptide Mapping by Liquid Chromatography–Electrospray Ionization Tandem Mass Spectrometry

Mass spectrometric techniques for the identification of proteins either by amino acid sequencing or by correlation of mass spectral data with sequence databases are becoming increasingly sensitive and are rapidly approaching the limit of detection achieved by the staining of proteins in gels or, after electroblotting, on membranes. Here we present a technique for the sensitive staining of proteins electroblotted onto nitrocellulose or polyvinylidene difluoride membranes and enzymatic cleavage conditions for such proteins to achieve optimal recovery of peptides. The technique is based on the deposition of colloidal silver on the membrane-bound proteins. Peptide mixtures generated by proteolysis on the membrane were recovered at high yields and were compatible with analysis by reverse-phase chromatography and on-line electrospray ionization mass spectrometry. This simple and rapid colloidal silver staining procedure allowed the visualization of less than 5 ng of protein in a band and thus approached the sensitivity of silver staining in gels. We demonstrate that this method allows the detection of subpicomole amounts of electroblotted proteins and their identification by high-performance liquid chromatography–electrospray ionization tandem mass spectrometry.     

Silver staining of proteins in polyacrylamide gels

Silver staining is used to detect proteins after electrophoretic separation on polyacrylamide gels. It combines excellent sensitivity (in the low nanogram range) with the use of very simple and cheap equipment and chemicals. It is compatible with downstream processing, such as mass spectrometry analysis after protein digestion. The sequential phases of silver staining are protein fixation, then sensitization, then silver impregnation and finally image development. Several variants of silver staining are described here, which can be completed in a time range from 2 h to 1 d after the end of the electrophoretic separation. Once completed, the stain is stable for several weeks.     

Rapid method for isolation and staining of bacterial lipopolysaccharide.

Classically bacterial lipopolysaccharide (LPS) purification and silver staining take several days. We designed a simple and fast method for LPS isolation which when combined with silver staining using Pharmacia PhastSystem both can be completed in few hours. The purity of LPS isolated by this simple method may not be comparable to that by the phenol-water method hence we recommend this rapid isolation and staining procedures for simple and fast study of LPS patterns in gels.     

Identification and elimination of heterophilic antibody interference during antibody pair screening

A sensitive and simple technique for the negative detection of lipopolysaccharides (LPSs) following polyacrylamide gel electrophoresis (PAGE) using eosin B (EB) was developed. After electrophoresis, gels were fixed, stained, and developed within 30 min to achieve transparent and colorless LPS bands under opaque gel matrix background. As low as 20 to 40 ng of total LPSs could be detected, which is 4-fold more sensitive than those of the widely used silver stain developed by Fomsgaard and coworkers and imidazole-zinc (IZ) negative stain. For its sensitivity and brevity, this stain may be a practical method for LPS determination in the routine laboratory.