Influence of various mixtures of inhaled toluene and xylene on the biological monitoring of exposure to these solvents in rats.

The present study was undertaken to describe the influence of simultaneous exposure by inhalation to toluene and xylene on some aspects of their respective metabolic disposition. Adult male rats were exposed acutely (5 h) to 75, 150, and 225 ppm of toluene or xylene and to various mixtures of these solvents: toluene (75 ppm) and xylene (225 ppm), toluene (150 ppm) and xylene (150 ppm), toluene (225 ppm) and xylene (75 ppm). Compared with single exposure, simultaneous exposure resulted in lower amounts of excreted hippuric acid (20-30%) and methylhippuric acids (4-40%) in urine over a period of 24 h, even though significant differences were seen only with the toluene (150 ppm) and xylene (150 ppm) combination. In addition, increased concentrations of solvents in blood (toluene, 230%; xylene, 500%) and in brain (toluene, 230%; xylene, 320%) were found during the immediate post-exposure period. Simultaneous exposure also enhanced the pulmonary elimination of both solvents (toluene, 190-240%; xylene, 340-650%). Influence of repeated simultaneous exposure (9 days) was investigated for the toluene (150 ppm) and xylene (150 ppm) combination and the results compared with those of repeated exposure to each solvent administered singly. Under these conditions, repeated simultaneous exposure decreased the excretion of urinary metabolites, but only after the first exposure. On the other hand, simultaneous exposure resulted in significantly higher concentrations of toluene (210%) and xylene (240%) in blood throughout the entire 9-day exposure period. These results strongly suggest mutual metabolic interactions (inhibition) between toluene and xylene that affect the metabolic disposition of both solvents and ultimately the biological monitoring of data of exposure to a combination of solvents in rats.     

A novel xylene substitute for histotechnology and histochemistry

Abstract

Propylene glycol methyl ether (PGME) exhibits excellent solvent and coupling properties. A toxicity database provided evidence suggesting that PGME might be a useful substitute for xylene in histotechnology and histochemistry applications. Tissue specimens were fixed, cleared in either PGME or xylene, embedded in paraffin wax, then dewaxed in either PGME or xylene. Sections were treated with the following stains: hematoxylin & eosin (H & E), three special stains of the Gordon/Sweet silver staining method, PAS, and Masson's trichrome, and immunostains including actin, CD3, CD34, CK, CK7/CK9, Ki-67, and ER/PR. The sections were mounted in a resinous medium consisting of PGME and pinene copolymer, then examined under a microscope. Variables such as water tolerance, dimension change, organic solvency, and anti-fading efficacy also were assessed. Depending on the application, PGME performance was equal to or exceeded that of xylene. PGME provided better optical clarity and nuclear detail, did not harden the tissue samples, conserved tissue antigenicity, and was amenable to resinous mounting. Tissues not dehydrated with absolute ethanol also were processed properly. Tissues treated with PGME did not warp or contract compared to those treated with xylene (p < 0.0001). PGME, however, exhibited less organic solvency than xylene. There was no discernible change in the colors of stains in sections processed with PGME even after storage for two years. These results suggest that PGME is a novel xylene substitute for applications in histotechnology and histochemistry.     

Conventional xylene and xylene-free methods for routine histopathological preparation of tissue sections

Abstract

Xylene customarily has been used as a clearing agent for routine tissue processing. Because xylene is a relatively hazardous solvent, laboratories are under pressure to seek less toxic alternatives for routine use. We prepared 30 paired soft tissue specimens for routine histopathological evaluation using conventional xylene and xylene-free methods to evaluate and compare their efficacy for fixation, processing, embedding, staining and turnaround time. All specimens were measured before and after processing. Three pathologists evaluated and scored the histological sections. Tissue shrinkage was greater when using the xylene method compared to the xylene-free method. The quality of tissue sections including tissue architecture; quality of staining; preservation of epithelial, fibrous, glandular, muscle and adipose tissue; inflammatory cells; and vascular tissue was better after using the xylene method, but differences were not statistically significant. Xylene-free method produced adequate results that nearly equaled the xylene method. Added advantages included cost effectiveness, better working atmosphere and decreased toxicity.     

Thermoalkalophilic lipase from an extremely halophilic bacterial strain Bacillus atrophaeus FSHM2: Purification,biochemical characterization and application

The present study was designed to isolate and identify an extremely halophilic lipase-producing bacterial strain, purify and characterize the related enzyme and evaluate its application for ethyl and methyl valerate synthesis. Among four halophilic isolates, the lipolytic ability of one isolate (identified as Bacillus atrophaeus FSHM2) was confirmed. The enzyme (designated as BaL) was purified using three sequential steps of ethanol precipitation and dialysis, Q-Sepharose XL anion-exchange chromatography and SP Sepharose cation-exchange chromatography with a final yield of 9.9% and a purification factor of 31.8. The purified BaL (Mw～85?kDa) was most active at 70?°C and pH 9 in the presence of 4 M NaCl and retained 58.7% of its initial activity after 150?min of incubation at 80?°C. The enzyme was inhibited by Cd²⁺ (35.6?±?1.7%) but activated by Ca²⁺ (132.4?±?2.2%). Evaluation of BaL's stability in the presence of organic solvents showed that xylene (25%) enhanced the relative activity of the enzyme to 334.2?±?0.6% after 1?h of incubation. The results of esterification studies using the purified BaL revealed that maximum ethyl valerate (88.5%) and methyl valerate (67.5%) synthesis occurred in the organic solvent medium (xylene) after 48?h of incubation at 50?°C.     

Starch Removal from Potato Tuber Sections

Heating plant sections at 90 C with 0.5% aqueous ammonium oxalate is required to remove pectins. When applied to tissues rich in starch such as potato, this step produces heavy dextrinization of the starch which hinders subsequent evaluation of the extinction values of the cell walls. To overcome this a method has been devised to brush away the starch granules from the sections with a thin paint brush, just after paraffin removal by xylene. The slide is then processed as usual: pectins are removed by heat treatment, cell walls are stained with PAS and the stain intensity can be evaluated by photometry.     

Phospholipid biosynthesis and solvent tolerance in Pseudomonas putida strains.

The role of the cell envelope in the solvent tolerance mechanisms of Pseudomonas putida was investigated. The responses of a solvent-tolerant strain, P. putida Idaho, and a solvent-sensitive strain, P. putida MW1200, were examined in terms of phospholipid content and composition and of phospholipid biosynthetic rate following exposure to a nonmetabolizable solvent, o-xylene. Following o-xylene exposure, P. putida MW1200 exhibited a decrease in total phospholipid content. In contrast, P. putida Idaho demonstrated an increase in phospholipid content 1 to 6 h after exposure. Analysis of phospholipid biosynthesis showed P. putida Idaho to have a higher basal rate of phospholipid synthesis than MW1200. This rate increased significantly following exposure to xylene. Both strains showed little significant turnover of phospholipid in the absence of xylene. In the presence of xylene, both strains showed increased phospholipid turnover. The rate of turnover was significantly greater in P. putida Idaho than in P. putida MW1200. These results suggest that P. putida Idaho has a greater ability than the solvent-sensitive strain MW1200 to repair damaged membranes through efficient turnover and increased phospholipid biosynthesis.     

Effect of some antibacterial agents on the hydrophobicity of wild-type and envelope mutant ofEscherichia coli

The hydrophobicity of a wild-type strain (DC0) ofEscherichia coli and its envelope mutant (DC2) has been studied in different organic solvent systems. The surface of the mutant was considerably more hydrophobic when xylene,n-hexadecane,n-octanol, cyclohexane, and isopropy myristate were tested. Emulsion formation occurred with DC2, which could be cleared by adding 5% vol/vol isopropanol. Pretreatment of cell suspensions of CD0 and DC2 with chlorhexidine diacetate or benzalkonium chloride, followed by exposure to one hydrocarbon (xylene) test system, produced further changes in the hydrophobic nature of both strains. Following cellular treatment with chlorhexidine or benzalkonium, the surface of DC0 was changed from slightly to markedly hydrophobic.     

Maternal Benzene Exposure during Pregnancy and Risk of Childhood Acute Lymphoblastic Leukemia: A Meta-Analysis of Epidemiologic Studies

Background

The prevalence of childhood leukemia is increasing rapidly all over the world. However, studies on maternal benzene exposure during pregnancy and childhood acute lymphoblastic leukemia (ALL) have not been systematically assessed. Therefore, we performed a meta-analysis to investigate the association between maternal solvent, paint, petroleum exposure, and smoking during pregnancy and risk of childhood ALL.

Methods

Relevant studies up to September 1^st, 2013 were identified by searching the PubMed, EMBASE, Cochrane library and the Web of Science databases. The effects were pooled using either fixed or random effect models based on the heterogeneity of the studies.

Results

Twenty-eight case-control studies and one cohort study were included for analysis, with a total of 16,695 cases and 1,472,786 controls involved. Pooled odds ratio (OR) with 95% confidence interval (CI) for ALL was 1.25 (1.09, 1.45) for solvent, 1.23 (1.02, 1.47) for paint, 1.42 (1.10, 1.84) for petroleum exposure, and 0.99 (0.93, 1.06) for maternal smoking during pregnancy. No publication bias was found in this meta-analysis and consistent results were observed for subgroup and sensitivity analyses.

Conclusions

Childhood ALL was associated with maternal solvent, paint, and petroleum exposure during pregnancy. No association was found between ALL and maternal smoking during pregnancy. Avoidance of maternal occupational and environmental benzene exposure during pregnancy could contribute to a decrease in the risk of childhood ALL.     

Alcoholic Thionin Counterstaining Following Golgi Dichromate-Silver Impregnation

Brains of cats that had been fixed 2 months or longer in 10% formalin were cut into 3-6 mm. slices and impregnated by Golgi's dichromate-silver procedure (6% dichromate solution, 4-6 days; 1.5% silver nitrate solution 2 days). Sections 100 µ thick were cut after embedding in low melting point paraffin. Three changes of xylene and three of absolute alcohol were followed by staining 3-5 minutes in a saturated solution of thionin in absolute alcohol. The sections were dipped quickly in absolute alcohol and cleared in xylene, then differentiation was effected by an equal-parts mixture of absolute alcohol and xylene. A final clearing in three changes of xylene and mounting in Permount completed the process. Counter-staining was most successful when applied to freshly cut sections.     

Suppression of Eimeria tenella Sporulation by Disinfectants

The disinfectant effects (DEs) of 10 types of chemicals, defined by their ability to destroy or inhibit oocysts and consequently prevent sporulation of Eimeria tenella field isolate, were evaluated in vitro. Correct species assignments and sample purities were confirmed by the singular internal transcribed spacer (ITS)-PCR analysis. A total of 18 treatments were performed, and the disinfection suppression levels were 75.9% for 39% benzene + 22% xylene (1:10 dilution), 85.5% for 30% cresol soup (1:1 dilution), and 91.7% for 99.9% acetic acid (1:2 dilution) group. The results indicate that acetic acid, cresol soup, and benzene+xylene are good candidates for suppression of E. tenella oocyst sporulation.     

Isolation and characterization of a novel organic solvent-tolerant Anoxybacillus sp. PGDY12, a thermophilic Gram-positive bacterium

Aims: To isolate and characterize new bacteria capable of tolerating high concentrations of organic solvents at high temperature. Methods and Results: A solvent‐tolerant, thermophilic bacterium was isolated from hot spring samples at 55°C. The strain PGDY12 was characterized as a Gram‐positive bacterium. It was able to tolerate 100% solvents, such as toluene, benzene and p‐xylene on plate overlay and high concentrations of these solvents in liquid cultures. A comparison of growth showed that 0·2% (v/v) benzene and 0·15% (v/v) p‐xylene were capable of enhancing the final cell yields. Transmission electron micrographs showed the incrassation of electron‐transparent intracellular material and the distorted cytoplasm in case of the cells grown in toluene. A phylogenetic analysis based on 16S rRNA sequence data indicated that the strain PGDY12 was member of the genus Anoxybacillus. Conclusions: The thermophilic, Gram‐positive Anoxybacillus sp. PGDY12 exhibited a unique and remarkable ability to tolerate solvents at 55°C. Significance and Impact of the Study: The solvent tolerance properties are less known in thermophilic bacteria. The Anoxybacillus sp. PGDY12 is the first strictly thermophilic bacterium able to tolerate a broad range of solvents. This strain is a promising candidate for use as a high temperature biocatalyst in the biotechnological applications.     

Comparison of insecticidal paint and deltamethrin against Triatoma infestans (Hemiptera: Reduviidae) feeding and mortality in simulated natural conditions

The vector of Chagas disease, Triatoma infestans, is largely controlled by the household application of pyrethroid insecticides. Because effective, large‐scale insecticide application is costly and necessitates numerous trained personnel, alternative control techniques are badly needed. We compared the residual effect of organophosphate‐based insecticidal paint (Inesfly 5A IGR? (I5A)) to standard deltamethrin, and a negative control, against T. infestans in a simulated natural environment. We evaluated mortality, knockdown, and ability to take a blood meal among 5^th instar nymphs. I5A paint caused significantly greater mortality at time points up to nine months compared to deltamethrin (Fisher's Exact Test, p < 0.01 in all instances). A year following application, mortality among nymphs in the I5A was similar to those in the deltamethrin (χ2 = 0.76, df=1, p < 0.76). At months 0 and 1 after application, fewer nymphs exposed to deltamethrin took a blood meal compared to insects exposed to paint (Fisher's Exact Tests, p < 0.01 and p < 0.01, respectively). Insecticidal paint may provide an easily‐applied means of protection against vectors of Chagas disease.     

Organic solvent tolerance of an alkaline protease from salt-tolerant alkaliphilic <Emphasis Type="Italic">Streptomyces clavuligerus</Emphasis> strain Mit-1

A salt-tolerant alkaliphilic actinomycete, Mit-1 was isolated from Mithapur, coastal region of Gujarat, India. The strain was identified as Streptomyces clavuligerus and based on 16S rRNA gene sequence (EU146061) homology; it was related to Streptomyces sp. (AY641538.1). The organism could grow with up to 15% salt and pH 11, optimally at 5% and pH 9. It was able to tolerate and secrete alkaline protease in the presence of a number of organic solvents including xylene, ethanol, acetone, butanol, benzene and chloroform. Besides, it could also utilize these solvents as the sole source of carbon with significant enzyme production. However, the organism produced spongy cell mass with all solvents and an orange brown soluble pigment was evident with benzene and xylene. Further, the enzyme secretion increased by 50-fold in the presence of butanol. With acetone and ethanol; the enzyme was highly active at 60–80°C and displayed optimum activity at 70°C. The protease was significantly stable and catalyzed the reaction in the presence of xylene, acetone and butanol. However, ethanol and benzene affected the catalysis of the enzyme adversely. Crude enzyme preparation was more stable at 37°C in solvents as compared to partially purified and purified enzymes. The study holds significance as only few salt-tolerant alkaliphilic actinomycetes are explored and information on their enzymatic potential is still scares. To the best of our knowledge this is the first report on organic solvent tolerant protease from salt-tolerant alkaliphilic actinomycetes.     

Rapid screening of solvents and carrier compounds for lactic acid recovery by emulsion liquid extraction and toxicity on Lactobacillus casei (ATCC 11443)

This paper describes a rapid method to identify the best solvent and carrier compound combinations with the highest extraction capability and the lowest microbial toxicity characteristics for product recovery from microbial fermentation. The extraction system has an aqueous phase, and an emulsion phase, which was a blend of sodium carbonate and organic phase [91% (v/v) organic solvent, 5% (v/v or wt/v) carrier compound, and 4% (v/v) surfactant Span 80]. Alamine 336, or tri-n-octylamine in n-heptane; Alamine 336, Alamine 304, or tributyl phosphate in hexane; and Alamine 304 or tributyl phosphate in iso-octane; Alamine 304 or Amberlite in xylene demonstrated high lactic acid extraction. For determination of bacterial toxicity of selected solvent and carrier compounds, Lactobacillus casei subsp. rhamnosus (ATCC 11443) was grown in LAF medium containing one of the selected organic solvent, carrier compound, and Span 80 in 250 ml flask at 37 °C and 125 rpm. Samples were collected regularly during 48 hour incubation, and measured for changes in cell density by absorbance at 620 nm, cell count using a fluorescent dye with flow cytometry, and lactic acid, and glucose concentrations by HPLC. Hexadecane:tributyl phosphate, n-dodecane:tri-n-octylamine, and kerosene:tri-n-octylphosphine oxide demonstrated the least microbial toxicity among the tested blends with excess solvent media. Whereas, hexanes:Alamine 304 and xylenes:Alamine 304 were nontoxic in solvent saturated media.This revised version was published online in October 2005 with corrections to the Cover Date.     

Using wintergreen oil for mounting mosquito larvae: a safer alternative to xylene

Permanent mounting of fourth instar mosquito larvae is essential for identifying Aedes spp. This procedure requires extensive exposure to xylene, a clearing agent in the mounting process. We investigated wintergreen oil as a substitute for xylene. Five hundred larvae were mounted on slides to evaluate shrinkage or expansion of specimens after clearing using xylene or wintergreen oil. We examined the ventral brush and siphonal hair tufts for species identification and for preservation of morphological characteristics after clearing specimens in xylene or wintergreen oil. Shrinkage of the length of whole larvae and width of the head, thorax and abdomen after mounting was significantly greater after clearing with xylene than with wintergreen oil. The length of the comb scale nearest the ventral brush was similar for both clearing agents. The clarity of the specimens after mounting was improved by clearing with wintergreen oil, but the integrity of the ventral brush and siphonal hair tufts were similar for both clearing agents.     

Microcount Method for Petrolatum-Based Topical Ointments Containing Waxes

A practical solvent system for the detection of microorganisms in topical ointments has been developed. The method involves dissolving 0.5 g of topical ointment in 50 ml of a solvent mixture (92 parts isopropyl myristate, 6 parts carbon disulfide, and 2 parts xylene) and filtering it through a 0.45-mum membrane filter. Residual solvent is then washed from the filter pad with 200 ml of sterile 0.5% Brain Heart Infusion broth containing 0.1% Tween 80. The filter pad is then removed and placed on a petri plate containing Trypticase Soy Agar medium. The petri plates thus prepared are then incubated at 37 C for 7 days, and the colonies produced are then counted. The toxicity of the solvent mixture was determined against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Salmonella newington, and spores of Bacillus subtilis and was found to be less toxic than the heat-sterilized isopropyl myristate and comparable to the filter-sterilized isopropyl myristate.     

Oxygen-depleted surfaces: a new antifouling technology

A novel, non-toxic strategy to combat marine biofouling is presented. The technology is paint with additions of up to 43% of industrial protein. Through microbial degradation of the protein component, an oxygen-depleted layer rapidly forms in a 0.2 mm layer close to the paint surface. With the present paint formulations, a stable, O₂-depleted layer can persist for 16 weeks. Barnacle larvae (cyprids) did not settle on panels where oxygen saturation was <20%, and cyprids were killed when exposed to O₂-free water for more than 1 h. It is also shown that the O₂-depleted layer will rapidly reform (within 15 min) after exposure to turbulent flow. Field exposure of panels for 16 weeks showed that paint with protein reduced fouling by barnacles and bryozoans by 80% and close to 100%, respectively. The results suggest that this novel technology may be developed into a non-toxic alternative to copper-based antifouling paints, especially for pleasure boats in sensitive environments. There is clearly potential for further development of the paint formulation, and a full-scale test on a boat-hull suggested that service-life under realistic operations needs to be improved.     

Dichromatism of bromphenol blue, with an improvement in the mercuric bromphenol blue technic for protein.

Staining of protein in sections using the mercuric bromphenol blue technic is improved by staining with 1% HgCl2 and 0.05% bromphenol blue in 2% aqueous acetic acid for 15 min at room temperature. Rinse slides 20 min in 2 changes of 0.5% aqueous acetic acid. Blot and give 2 fast changes in absolute ethanol with agitation before transferring to xylene. Transfer slide to 0.5% n-butylamine in xylene for a few seconds until the section is blue, then, after 2 changes of xylene, mount in DPX. Spectrophotometric analysis of this blue dye at different concentrations and with or without heparin showed that the reddish hues are due to dichromatism and not metachromasia.     

Dietary flaxseed's protective effects on body tissues of mice after oral exposure to xylene

Xylene is a common pollutant in the environment that enters the body of animals and humans in various ways, but most often through the respiratory tract and adversely affects their overall health. However, xylene effects after oral exposure have not been sufficiently studied. This study aimed to investigate the effects of xylene exposure on the mouse organism and to identify possible beneficial effects of flaxseed on such exposure. Eighty mice were divided into four groups: control group C (basal diet + no xylene exposure), group X (oral exposure by 400 mg/kg/day xylene), group F (10% flaxseed supplementation of basal diet), and group XF (10% dietary flaxseed + oral exposure by xylene). Experimental trial took 14 days. Clinical examination, spectroscopic analysis of tissue aminotransferases, total lactate dehydrogenase (TLDH), and acetylcholinesterase (AchE) activities, electrophoretic analysis of LDH isoenzymes, western blot and immunohistochemical analysis of apoptosis as well as routine histology of the kidneys and jejunum, and transmission electron microscopy of the liver were performed. Marked restlessness in group X and high weight losses in mice of all groups were recorded during the experiment. Xylene promoted apoptosis (caspase-3 expression) without causing marked structural changes in the liver and jejunum, although renal cortex structure was affected adversely. In the brain, liver, and kidney of mice, xylene increased levels of liver transaminases, LDH, and decreased AchE activities, reflecting cell membrane damage. Flaxseed feeding improved animal behaviour, leakage of enzymes and prevented selected tissue toxic damage induced by xylene by protecting cell membrane integrity and fluidity and by suppressing apoptosis. These results point at the protective effect of flaxseed consumption on mice.     

Effects of marine paints on microbial biofilm development on three materials

The development of biofilms of Pseudomonas aeruginosa PAO-1 was studied using modified Robbins devices. Biofilm development was measured using viable counts, acridine orange direct counts (AODC), and a colorimetric method for exopolysaccharide (EPS). Biofilms reached their maximum population 24–72 h after inoculation on coupons with no paint or on coupons coated with marine paint VC-18 without additives. Biofilms on stainless steel contained higher numbers of total cells and of viable cells than biofilms on fiberglass or aluminum. Coating the surfaces with marine paint VC-18 resulted in decreased numbers of cells on stainless steel but had little effect on numbers of cells on fiberglass or aluminum. Addition to the paint of Cu or tributyltin (TBT), the active components in two types of antifouling paints, inhibited the initial development of biofilms. However, by 72–96 h, most biofilms contained the same number of cells as surfaces without additives as shown by both viable counts and AODC. Biofilms that formed on surfaces coated with Cu- or TBT-containing paint did not synthesize more EPS, suggesting that P. aeruginosa PAO-1 does not respond to these compounds by synthesizing more EPS, which could bind the metal and protect the cells. Rather, these biofilms may contain Cu- or TBT-resistant cells. TBT-resistant cells made up 1–10% of the viable counts in biofilms on uncoated stainless steel, but in biofilms on stainless steel coated with marine paint containing TBT, TBT-resistant cells made up as much as 50% of the population. For non-coated stainless steel surfaces, Cu-resistant cells initially made up the majority of the population, but after 48 h they made up less than 1% of the population. On Cu-coated stainless steel, Cu-resistant cells predominated through 48 h, but after 48 h they comprised less than 10% of the population. These results suggest that the growth of TBT-resistant and Cu-resistant cells contributes to biofilms of P. aeruginosa PAO-1 at early stages of development but not at later stages. Received 16 December 1997/ Accepted in revised form 9 March 1998