Demand for biomass to meet renewable energy targets in the United States: implications for land use

Renewable energy policies in the electricity and transportation sectors in the United States are expected to create demand for biomass and food crops (corn) that could divert land from food crop production. We develop a dynamic, open‐economy, price‐endogenous multi‐market model of the US agricultural, electricity and transportation sectors to endogenously determine the quantity and mix of bioenergy likely to be required to meet the state Renewable Portfolio Standards (RPSs) and the federal Renewable Fuel Standard (RFS) if implemented independently or jointly (RFS & RPS) over the 2007–2030 period and their implications for the extent and spatial pattern of diversion of land from other uses for biomass feedstock production. We find that the demand for biomass ranges from 100 million metric tons (MMT) under the RPS alone to 310 MMT under the RFS & RPS; 70% of the biomass in the latter case can be met by crop and forest residues, while the rest can be met by devoting 3% of cropland to energy crop production with 80% of this being marginal land. Our findings show significant potential to meet current renewable energy goals by expanding high‐yielding energy crop production on marginal land and using residues without conflicting with food crop production.     

Parameter and process significance in mechanistic modeling of cellulose hydrolysis

A process-based model relevant to landfill and anaerobic digesters was developed, which included a novel approach to biomass transfer between a cellulose-bound biofilm and biomass in the bulk liquid. Model results highlighted the significance of the bacterial colonization of cellulose particles by attachment through contact in solution. Simulations revealed that both enhanced colonization and cellulose degradation are associated with reduced cellulose particle size, increased biomass populations in solution and increased cellulose-binding ability of the biomass. This suggests that transportation of biomass into the system from elsewhere and/or bacterial inoculation of such systems could enhance degradation significantly. A sensitivity analysis of the system parameters revealed the biological rate and yield properties of the hydrolyzing bacteria are most significant with regard to cellulose degradation in the system.     

Transition of cellulose crystalline structure and surface morphology of biomass as a function of ionic liquid pretreatment and its relation to enzymatic hydrolysis

Cellulose is inherently resistant to breakdown, and the native crystalline structure (cellulose I) of cellulose is considered to be one of the major factors limiting its potential in terms of cost-competitive lignocellulosic biofuel production. Here we report the impact of ionic liquid pretreatment on the cellulose crystalline structure in different feedstocks, including microcrystalline cellulose (Avicel), switchgrass (Panicum virgatum), pine ( Pinus radiata ), and eucalyptus ( Eucalyptus globulus ), and its influence on cellulose hydrolysis kinetics of the resultant biomass. These feedstocks were pretreated using 1-ethyl-3-methyl imidazolium acetate ([C2mim][OAc]) at 120 and 160 °C for 1, 3, 6, and 12 h. The influence of the pretreatment conditions on the cellulose crystalline structure was analyzed by X-ray diffraction (XRD). On a larger length scale, the impact of ionic liquid pretreatment on the surface roughness of the biomass was determined by small-angle neutron scattering (SANS). Pretreatment resulted in a loss of native cellulose crystalline structure. However, the transformation processes were distinctly different for Avicel and for the biomass samples. For Avicel, a transformation to cellulose II occurred for all processing conditions. For the biomass samples, the data suggest that pretreatment for most conditions resulted in an expanded cellulose I lattice. For switchgrass, first evidence of cellulose II only occurred after 12 h of pretreatment at 120 °C. For eucalyptus, first evidence of cellulose II required more intense pretreatment (3 h at 160 °C). For pine, no clear evidence of cellulose II content was detected for the most intense pretreatment conditions of this study (12 h at 160 °C). Interestingly, the rate of enzymatic hydrolysis of Avicel was slightly lower for pretreatment at 160 °C compared with pretreatment at 120 °C. For the biomass samples, the hydrolysis rate was much greater for pretreatment at 160 °C compared with pretreatment at 120 °C. The result for Avicel can be explained by more complete conversion to cellulose II upon precipitation after pretreatment at 160 °C. By comparison, the result for the biomass samples suggests that another factor, likely lignin-carbohydrate complexes, also impacts the rate of cellulose hydrolysis in addition to cellulose crystallinity.     

Effect of biomass concentration and inoculum source on the rate of anaerobic cellulose solubilization

This study determines cellulose solubilization kinetics from controlled batch digestions and shows the effect of inoculum biomass concentrations. Separate measurements and analyzes were performed for sessile biomass (biofilms) and planktonic biomass (free suspensions). Experiments were conducted using either leachate enriched on cellulose or rumen fluid as inoculum to assess if the effect of biomass concentration was consistent for microbial populations from different source environments. All batch digestions were fitted to a first-order kinetic model (R² ranging from 0.94 to 0.99). Regression analysis used to compare the first-order hydrolysis rate showed that the first-order hydrolysis rate was most strongly correlated with the concentration of sessile biomass rather than with the concentration of total or planktonic biomass. The correlation between solubilization rate and sessile biomass was statistically the same for the rumen and leachate inoculated reactors indicating that at low concentration ratios of inoculum to cellulose, the rate of cellulose solubilization is dependant primarily on sessile biomass concentration rather than the species profile of the cellulolytic community.     

Hemicelluloses negatively affect lignocellulose crystallinity for high biomass digestibility under NaOH and H2SO4 pretreatments in Miscanthus

ABSTRACT: BACKGROUND: Lignocellulose is the most abundant biomass on earth. However, biomass recalcitrance has become a major factor affecting biofuel production. Although cellulose crystallinity significantly influences biomass saccharification, little is known about the impact of three major wall polymers on cellulose crystallization. In this study, we selected six typical pairs of Miscanthus samples that presented different cell wall compositions, and then compared their cellulose crystallinity and biomass digestibility after various chemical pretreatments. RESULTS: A Miscanthus sample with a high hemicelluloses level was determined to have a relatively low cellulose crystallinity index (CrI) and enhanced biomass digestibility at similar rates after pretreatments of NaOH and H2SO4 with three concentrations. By contrast, a Miscanthus sample with a high cellulose or lignin level showed increased CrI and low biomass saccharification, particularly after H2SO4 pretreatment. Correlation analysis revealed that the cellulose CrI negatively affected biomass digestion. Increased hemicelluloses level by 25% or decreased cellulose and lignin contents by 31% and 37% were also found to result in increased hexose yields by 1.3-times to 2.2-times released from enzymatic hydrolysis after NaOH or H2SO4 pretreatments. The findings indicated that hemicelluloses were the dominant and positive factor, whereas cellulose and lignin had synergistic and negative effects on biomass digestibility. CONCLUSIONS: Using six pairs of Miscanthus samples with different cell wall compositions, hemicelluloses were revealed to be the dominant factor that positively determined biomass digestibility after pretreatments with NaOH or H2SO4 by negatively affecting cellulose crystallinity. The results suggested potential approaches to the genetic modifications of bioenergy crops.     

Selective detection of crystalline cellulose in plant cell walls with sum-frequency-generation (SFG) vibration spectroscopy

The selective detection of crystalline cellulose in biomass was demonstrated with sum-frequency-generation (SFG) vibration spectroscopy. SFG is a second-order nonlinear optical response from a system where the optical centrosymmetry is broken. In secondary plant cell walls that contain mostly cellulose, hemicellulose, and lignin with varying concentrations, only certain vibration modes in the crystalline cellulose structure can meet the noninversion symmetry requirements. Thus, SFG can be used to detect and analyze crystalline cellulose selectively in lignocellulosic biomass without extraction of noncellulosic species from biomass or deconvolution of amorphous spectra. The selective detection of crystalline cellulose in lignocellulosic biomass is not readily achievable with other techniques such as XRD, solid-state NMR, IR, and Raman analyses. Therefore, the SFG analysis presents a unique opportunity to reveal the cellulose crystalline structure in lignocellulosic biomass.     

Visualization of biomass solubilization and cellulose regeneration during ionic liquid pretreatment of switchgrass

Auto‐fluorescent mapping of plant cell walls was used to visualize cellulose and lignin in pristine switchgrass (Panicum virgatum) stems to determine the mechanisms of biomass dissolution during ionic liquid pretreatment. The addition of ground switchgrass to the ionic liquid 1‐n‐ethyl‐3‐methylimidazolium acetate resulted in the disruption and solubilization of the plant cell wall at mild temperatures. Swelling of the plant cell wall, attributed to disruption of inter‐ and intramolecular hydrogen bonding between cellulose fibrils and lignin, followed by complete dissolution of biomass, was observed without using imaging techniques that require staining, embedding, and processing of biomass. Subsequent cellulose regeneration via the addition of an anti‐solvent, such as water, was observed in situ and provided direct evidence of significant rejection of lignin from the recovered polysaccharides. This observation was confirmed by chemical analysis of the regenerated cellulose. In comparison to untreated biomass, ionic liquid pretreated biomass produces cellulose that is efficiently hydrolyzed with commercial cellulase cocktail with high sugar yields over a relatively short time interval. Biotechnol. Bioeng. 2009; 104: 68–75 Published 2009 Wiley Periodicals, Inc.     

生物质生物预处理研究进展与展望

木质纤维素生物质分布广、产量大、可再生,用于制备生物基能源、生物基材料和生物基化学品。木质纤维素生物质组成复杂,包含纤维素、半纤维素和木质素等,木质素与半纤维素通过共价键、氢键交联形成独特的“包裹结构”,纤维素含有复杂的分子内与分子间氢键,上述因素制约着其资源化利用。生物预处理以其独特优越性成为生物质研究的重要方面。系统阐述了生物预处理过程中木质素降解和基团修饰对纤维素酶解的影响,纤维素含量及结晶区变化,半纤维素五碳糖利用,微观物理结构的改变。进一步提出了以生物预处理为核心的组合预处理、基于不同功能的多酶协同催化体系、木质纤维素组分分级利用和新型高效细菌预处理工艺是生物预处理未来发展的重要趋势。     

Cellulose and lignin degradation in forest soils: Response to moisture,temperature, and acidity

The concentration of lignin in plant tissue is a major factor controlling organic matter degradation rates in forest ecosystems. Microbial biomass and lignin and cellulose decomposition were measured for six weeks in forest soil microcosms in order to determine the influence of pH, moisture, and temperature on organic matter decomposition. Microbial biomass was determined by chloroform fumigation; lignin and cellulose decomposition were measured radiometrically. The experiment was designed as a Latin square with soils of pH of 4.5, 5.5, and 6.5 adjusted to 20, 40, or 60% moisture content, and incubated at temperatures of 4, 12, or 24°C. Microbial biomass and lignin and cellulose decomposition were not significantly affected by soil acidity. Microbial biomass was greater at higher soil moisture contents. Lignin and cellulose decomposition significantly increased at higher soil temperatures and moisture contents. Soil moisture was more important in affecting microbial biomass than either soil temperature or soil pH.     

Cellulase stimulation during biodegradation of lignocellulosic residues at increased biomass loading

Microbial degradation of lignocellulosic biomass is primarily affected by the composition and structure of biomass, as well as enzyme activities that are influenced by the presence of in-process degradation products. This study focuses on the latter, and demonstrates that cellulase activity of Neurospora discreta is stimulated in the presence of in-process soluble lignin degradation products. Two types of biomass - cocopeat and sugarcane bagasse, with contrasting lignin content and cellulose structure were tested at two biomass loadings each. At the higher biomass loading, cocopeat showed the highest amount of hydrolyzed cellulose and cellulase activity, despite its low cellulose content and recalcitrant cellulose structure. A strong positive correlation was revealed between the amount of in-process degraded lignin and cellulase activity, indicating a stimulatory effect on cellulase, which contradicts most previous literature. Furthermore, the causal relationship between the amount of degraded lignin and cellulase activity was established in a model system of commercial cellulase and standard soluble lignin. This work could pave the way for using biomass loading as a process lever to enhance cellulose hydrolysis in microbial conversion of lignocellulosic biomass.     

Ionic-liquid induced changes in cellulose structure associated with enhanced biomass hydrolysis

The effects of varying ionic liquid pretreatment parameters on various sources of lignocellulosic biomass have been studied using X-ray powder diffraction, X-ray fiber diffraction, and compositional analysis. Comparative enzymatic hydrolysis and sugar analysis were used to relate the observed changes in cellulose structure to biomass digestibility. In this study, the factor most clearly associated with enhanced biomass hydrolysis is the conversion of cellulose fibers from the cellulose I to the cellulose II crystal phase.     

Pretreatments to enhance the digestibility of lignocellulosic biomass

Lignocellulosic biomass represents a rather unused source for biogas and ethanol production. Many factors, like lignin content, crystallinity of cellulose, and particle size, limit the digestibility of the hemicellulose and cellulose present in the lignocellulosic biomass. Pretreatments have as a goal to improve the digestibility of the lignocellulosic biomass. Each pretreatment has its own effect(s) on the cellulose, hemicellulose and lignin; the three main components of lignocellulosic biomass. This paper reviews the different effect(s) of several pretreatments on the three main parts of the lignocellulosic biomass to improve its digestibility. Steam pretreatment, lime pretreatment, liquid hot water pretreatments and ammonia based pretreatments are concluded to be pretreatments with high potentials. The main effects are dissolving hemicellulose and alteration of lignin structure, providing an improved accessibility of the cellulose for hydrolytic enzymes.     

Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing

Twin screw extrusion based pretreatment of biomass is an attractive option due to its flexibility to carry out chemical reactions under relatively high stresses, temperatures and pressures. However, extrusion processes are rarely utilized in biomass pretreatment because such processing is constrained by rheological behavior of typical biomass suspensions. Without the manipulation of their rheological behavior, biomass suspensions become unprocessable within the extruder at modest biomass concentrations. Here it is demonstrated that gelation agents can render biomass suspensions processable. Specifically, carboxy methyl cellulose, CMC, could be used in conjunction with alkaline pretreatment of hardwood-type biomass and enabled separation of lignin from cellulose fibers. Furthermore, recycled black liquor, obtained upon pretreatment, was determined to be as effective as CMC for rendering biomass suspensions flowable by again facilitating the concomitant application of high shearing stresses and chemical treatment for the pretreatment of the biomass in the twin screw extruder.     

Cellulose utilization in forest litter and soil: identification of bacterial and fungal decomposers

Organic matter decomposition in the globally widespread coniferous forests has an important role in the carbon cycle, and cellulose decomposition is especially important in this respect because cellulose is the most abundant polysaccharide in plant litter. Cellulose decomposition was 10 times faster in the fungi-dominated litter of Picea abies forest than in the bacteria-dominated soil. In the soil, the added (13)C-labelled cellulose was the main source of microbial respiration and was preferentially accumulated in the fungal biomass and cellulose induced fungal proliferation. In contrast, in the litter, bacterial biomass showed higher labelling after (13)C-cellulose addition and bacterial biomass increased. While 80% of the total community was represented by 104-106 bacterial and 33-59 fungal operational taxonomic units (OTUs), 80% of the cellulolytic communities of bacteria and fungi were only composed of 8-18 highly abundant OTUs. Both the total and (13)C-labelled communities differed substantially between the litter and soil. Cellulolytic bacteria in the acidic topsoil included Betaproteobacteria, Bacteroidetes and Acidobacteria, whereas these typically found in neutral soils were absent. Most fungal cellulose decomposers belonged to Ascomycota; cellulolytic Basidiomycota were mainly represented by the yeasts Trichosporon and Cryptococcus. Several bacteria and fungi demonstrated here to derive their carbon from cellulose were previously not recognized as cellulolytic.     

Application of a water jet system to the pretreatment of cellulose

Plant cellulose is the most abundant organic compound on earth. Technologies for producing cellulose fiber or improving the enzymatic saccharification of cellulose hold the key to biomass applications. A technology for atomizing biomass without strong acid catalysis remains to be developed. The water jet is a well-known device used in machines (e.g., washing machines, cutters, and mills) that use high-pressure water. In this study, we examined whether a water jet system could be used to atomize crystalline cellulose, which comprises approximately 50% of plant biomass. The Star Burst System manufactured by Sugino Machine Limited (Sugino Machine; Toyama, Japan) is a unique atomization machine that uses a water jet to atomize materials and thereby places lower stress on the environment. After treatment with this system, the crystalline cellulose was converted into a gel-like form. High-angular annular dark-field scanning transmission electron microscopy showed that the cellulose fibers had been converted from a solid crystalline into a matrix of cellulose nanofibers. In addition, our results show that this system can improve the saccharification efficiency of cellulases by more than three-fold. Hence, the Star Burst System provides a new and mild pretreatment system for processing biomass materials.     

Oxidoreductive cellulose depolymerization by the enzymes cellobiose dehydrogenase and glycoside hydrolase 61

Several members of the glycoside hydrolase 61 (GH61) family of proteins have recently been shown to dramatically increase the breakdown of lignocellulosic biomass by microbial hydrolytic cellulases. However, purified GH61 proteins have neither demonstrable direct hydrolase activity on various polysaccharide or lignacious components of biomass nor an apparent hydrolase active site. Cellobiose dehydrogenase (CDH) is a secreted flavocytochrome produced by many cellulose-degrading fungi with no well-understood biological function. Here we demonstrate that the binary combination of Thermoascus aurantiacus GH61A (TaGH61A) and Humicola insolens CDH (HiCDH) cleaves cellulose into soluble, oxidized oligosaccharides. TaGH61A-HiCDH activity on cellulose is shown to be nonredundant with the activities of canonical endocellulase and exocellulase enzymes in microcrystalline cellulose cleavage, and while the combination of TaGH61A and HiCDH cleaves highly crystalline bacterial cellulose, it does not cleave soluble cellodextrins. GH61 and CDH proteins are coexpressed and secreted by the thermophilic ascomycete Thielavia terrestris in response to environmental cellulose, and the combined activities of T. terrestris GH61 and T. terrestris CDH are shown to synergize with T. terrestris cellulose hydrolases in the breakdown of cellulose. The action of GH61 and CDH on cellulose may constitute an important, but overlooked, biological oxidoreductive system that functions in microbial lignocellulose degradation and has applications in industrial biomass utilization.     

Decomposition of 14C-labeled cellulose substrates in litter and soil from a beechwood on limestone

The decomposition of three different ¹⁴C-labeled cellulose substrates (plant holocellulose, plant cellulose prepared from ¹⁴C-labeled beech wood (Fagus sylvatica) and bacterial cellulose produced by Acetobacter xylinum) in samples from the litter and mineral soil layer of a beechwood on limestone was studied. In a long-term (154 day) experiment, mineralization of cellulose materials, production of ¹⁴C-labeled water-soluble compounds, and incorporation of ¹⁴C in microbial biomass was in the order Acetobacter cellulose > holocellulose > plant cellulose in both litter and soil. In general, mineralization of cellulose, production of ¹⁴C-labeled water-soluble compounds, and incorporation of ¹⁴C in microbial biomass were more pronounced, but microbial biomass ¹⁴C declined more rapidly in litter than in soil. In short-term (14 day) incubations, mineralization of cellulose substrates generally corresponded with cellulase and xylanase activities in litter and soil. Pre-incubation with trace amounts of unlabeled holocellulose significantly increased the decomposition of ¹⁴C-labeled cellulose substrates and increased cellulase activity later in the experiment but did not affect xylanase activity. The sum of ¹⁴CO₂ production, ¹⁴C in microbial biomass, and ¹⁴C in water-soluble compounds is considered to be a sensitive parameter by which to measure cellulolytic activity in soil and litter samples in short-term incubations. Shorter periods than 14 days are preferable in assays using Acetobacter cellulose, because the decomposition of this substrate is more variable than that of holocellulose and plant cellulose.Offprint requests to: S. Scheu.     

Mild pretreatment of yellow poplar biomass using sequential dilute acid and enzymatically-generated peracetic acid to enhance cellulase accessibility

Biomass contains cellulose, xylan and lignin in a complex interwoven structure that hinders enzymatic hydrolysis of the cellulose. To separate these components in yellow poplar biomass, we sequentially pretreated with dilute sulfuric acid and enzymatically-generated peracetic acid. In the first step, the dilute acid with microwave heating (140°C, 5 min) hydrolyzed 90% of xylan. The xylose yield in hydrolysate after dilute acid pretreatment was 83.1%. In the second step, peracetic acid (60°C, 6 h) removed up to 80% of lignin. This sequential pretreatment fractionated biomass into xylan and lignin, leaving a solid residue enriched in cellulose (~80%). The sequential pretreatment enhanced enzymatic digestibility of the cellulase by removal of the other components in biomass. The glucose yield after enzymatic hydrolysis was 90.5% at a low cellulase loading (5 FPU/g of glucan), which is 1.6 and 18 times higher than for dilute acid-pretreated biomass and raw biomass, respectively. This novel sequential pretreatment with dilute acid and peracetic acid efficiently separates the three major components of yellow poplar biomass, and reduces the amount of cellulase needed.     

Structure-function analysis of the coiled-coil and leucine-rich repeat domains of the RPS5 disease resistance protein

The Arabidopsis (Arabidopsis thaliana) RESISTANCE TO PSEUDOMONAS SYRINGAE5 (RPS5) disease resistance protein mediates recognition of the Pseudomonas syringae effector protein AvrPphB. RPS5 belongs to the coiled-coil-nucleotide-binding site-leucine-rich repeat (CC-NBS-LRR) family and is activated by AvrPphB-mediated cleavage of the protein kinase PBS1. Here, we present a structure-function analysis of the CC and LRR domains of RPS5 using transient expression assays in Nicotiana benthamiana. We found that substituting the CC domain of RPS2 for the RPS5 CC domain did not alter RPS5 specificity and only moderately reduced its ability to activate programmed cell death, suggesting that the CC domain does not play a direct role in the recognition of PBS1 cleavage. Analysis of an RPS5-super Yellow Fluorescent Protein fusion revealed that RPS5 localizes to the plasma membrane (PM). Alanine substitutions of predicted myristoylation (glycine-2) and palmitoylation (cysteine-4) residues affected RPS5 PM localization, protein stability, and function in an additive manner, indicating that PM localization is essential to RPS5 function. The first 20 amino acids of RPS5 were sufficient for directing super Yellow Fluorescent Protein to the PM. C-terminal truncations of RPS5 revealed that the first four LRR repeats are sufficient for inhibiting RPS5 autoactivation; however, the complete LRR domain was required for the recognition of PBS1 cleavage. Substitution of the RPS2 LRR domain resulted in the autoactivation of RPS5, indicating that the LRR domain must coevolve with the NBS domain. We conclude that the RPS5 LRR domain functions to suppress RPS5 activation in the absence of PBS1 cleavage and promotes RPS5 activation in its presence.