METHIONINE PROXIMITY ASSAY,A NOVEL METHOD FOR EXPLORING PEPTIDE LIGAND–RECEPTOR INTERACTION

ABSTRACT

Probing G-protein coupled receptor (GPCR) structures is a priority in the functional and structural understanding of GPCRs. In the past, we have used several approaches around photoaffinity labeling in order to establish contact points between peptide ligands and their cognate receptors. Such contact points are helpful to build reality based molecular models of GPCRs and to elucidate their activation mechanisms. Most studies of peptidergic GPCRs have been done with photolabeling peptides containing the benzophenone moiety as a reputedly non-selective probe. However our recent results are now showing that p-benzoylphenylalanine (Bpa) has some selectivity for Met residues in the receptor protein, reducing the accuracy of this method. Turning a problem into an asset, modified analogues of Bpa, e.g. p,?p″-nitrobenzoylphenylalanine (NO₂Bpa), display increased selectivity for such Met residues. It means a photoprobe containing such modified benzophenone-moieties does not label a receptor protein unless a Met residue is in the immediate vicinity. This unique property allows us to propose and show the feasibility and utility of a new method for scanning the contact areas of peptidergic GPCRs, the Methionine Proximity Assay (MPA). Putative contact residues of the receptor are exchanged to Met residues by site-directed mutagenesis and are subjected to photoaffinity labeling with such modified benzophenone-containing peptides. Successful incorporation indicates physical proximity of those residues. This principle is established and explored with benzophenone-containing analogues of angiotensin II and the two known human angiotensin II receptors AT₁ and AT₂, determining contact points in both receptors. This approach has several important advantages over other scanning approaches, e.g., the SCAM procedure, since the MPA-method can be used in the hydrophobic core of receptors.     

Structure of the Human Angiotensin II Type 1 (AT1) Receptor Bound to Angiotensin II from Multiple Chemoselective Photoprobe Contacts Reveals a Unique Peptide Binding Mode

Breakthroughs in G protein-coupled receptor structure determination based on crystallography have been mainly obtained from receptors occupied in their transmembrane domain core by low molecular weight ligands, and we have only recently begun to elucidate how the extracellular surface of G protein-coupled receptors (GPCRs) allows for the binding of larger peptide molecules. In the present study, we used a unique chemoselective photoaffinity labeling strategy, the methionine proximity assay, to directly identify at physiological conditions a total of 38 discrete ligand/receptor contact residues that form the extracellular peptide-binding site of an activated GPCR, the angiotensin II type 1 receptor. This experimental data set was used in homology modeling to guide the positioning of the angiotensin II (AngII) peptide within several GPCR crystal structure templates. We found that the CXC chemokine receptor type 4 accommodated the results better than the other templates evaluated; ligand/receptor contact residues were spatially grouped into defined interaction clusters with AngII. In the resulting receptor structure, a β-hairpin fold in extracellular loop 2 in conjunction with two extracellular disulfide bridges appeared to open and shape the entrance of the ligand-binding site. The bound AngII adopted a somewhat vertical binding mode, allowing concomitant contacts across the extracellular surface and deep within the transmembrane domain core of the receptor. We propose that such a dualistic nature of GPCR interaction could be well suited for diffusible linear peptide ligands and a common feature of other peptidergic class A GPCRs.     

Photoaffinity labeling of mutant neurokinin-1 receptors reveals additional structural features of the substance P/NK-1 receptor complex

Photoaffinity labeling, receptor site-directed mutagenesis, and high-resolution NMR spectroscopy have been combined to further define the molecular details of the binding of substance P (SP) to the rat neurokinin-1 (NK-1) receptor. Mutant NK-1 receptors were constructed by substituting Ala for Met174 and/or Met181: residues previously identified as the sites of covalent attachment of radioiodinated, photoreactive derivatives of SP containing p-benzoyl-L-phenylalanine (Bpa) in positions 4 and 8, respectively. Photoaffinity labeling of the M181A mutant using radioiodinated Bpa8-SP resulted in a marked reduction in photoincorporation efficiency compared to the wild-type receptor. In contrast, photoaffinity labeling of the M174A mutant using radioiodinated Bpa4-SP gave the unexpected result of an increase in the efficiency of photoincorporation compared to the wild-type receptor. Enzymatic and chemical fragmentation analysis of the photolabeled receptor mutants established that the sites of covalent attachment were not the substituted alanine, but rather the other methionine on the second extracellular (E2) loop sequence, that is not the primary site of attachment in the wild-type receptor. The results thus suggest a close spatial relationship between Met174 and Met181 on the NK-1 receptor. To evaluate this structural disposition, NMR analyses were performed on a synthetic peptide with a sequence corresponding to the entire E2 loop and segments of the adjoining transmembrane helices to anchor the peptide in the lipids used to mimic a membrane. The structural features of the E2 loop include a centrally located alpha-helix, extending from Pro175 to Glu183, as well as smaller alpha-helices at the termini, corresponding to the transmembrane regions. The two methionine residues are located on the same face of the central alpha-helix, approximately 11 A apart from each other, and are therefore consistent with the conclusions of the photoaffinity labeling results.     

Photolabeling identifies position 172 of the human AT(1) receptor as a ligand contact point: receptor-bound angiotensin II adopts an extended structure

An angiotensin II (AngII) peptidic analogue in which the third residue (valine) was substituted with the photoreactive p-benzoyl-L-phenylalanine (Bpa) was used to identify ligand-binding sites of the human AT(1) receptor. High-affinity binding of the analogue, (125)I-[Bpa(3)]AngII, to the AT(1) receptor heterologously expressed in COS-7 cells enabled us to efficiently photolabel the receptor. Chemical and enzymatic digestions of the (125)I-[Bpa(3)]AngII-AT(1) complex were performed, and receptor fragments were analyzed in order to define the region of the receptor with which the ligand interacts. Results show that CNBr hydrolysis of the photolabeled receptor gave a glycosylated fragment which, after PNGase-F digestion, migrated as a 11.4 kDa fragment, circumscribing the labeled domain between residues 143-243 of the AT(1) receptor. Digestion of the receptor-ligand complex with Endo Lys-C or trypsin followed by PNGase-F treatment yielded fragments of 7 and 4 kDa, defining the labeling site of (125)I-[Bpa(3)]AngII within residues 168-199 of the AT(1) receptor. Photolabeling of three mutant receptors in which selected residues adjacent to residue 168 were replaced by methionine within the 168-199 fragment (I172M, T175M, and I177M) followed by CNBr cleavage revealed that the bound photoligand (125)I-[Bpa(3)]AngII forms a covalent bond with the side chain of Met(172) of the second extracellular loop of the AT(1) receptor. These data coupled with previously obtained results enable us to propose a model whereby AngII adopts an extended beta-strand conformation when bound to the receptor and would orient itself within the binding domain by having its N-terminal portion interacting with the second extracellular loop and its C-terminus interacting with residues of the seventh transmembrane domain.     

Angiotensin II is bound to both receptors AT1 and AT2, parallel to the transmembrane domains and in an extended form

We have applied photoaffinity labelling methods combined with site-directed mutagenesis towards the two principal angiotensin II (AnglI) receptors AT1 and AT2 in order to determine contact points between AngII and the two receptors. We have first identified the receptor contact points between an N- and a C-terminal residue of the AngII molecule and the AT1 receptor and constructed with this stereochemical restriction a molecular model of AT1. A similar approach with a modified procedure of photoaffinity labelling has allowed us now to determine contact points also in the AT2 receptor. Molecular modelling of AT2 on the rhodopsin scaffold and energy minimisation of AngII binding into this AT2 model produced a model strikingly similar to the AT11 structure. Superposition of the experimentally obtained contact points of AngII with AT2 upon this model revealed excellent congruence between the experimental and modelling results. Conclusions: (i) athough AT1 and AT2 have quite low sequence homology, they both bind AngII with similar affinity and in an almost identical fashion, as if the ligand dictates the way it has to be bound, and (ii) in its bound form, AngII adopts an extended conformation in both AT1 and AT2, contrary to all previous predictions.     

Insights into interactions between the alpha-helical region of the salmon calcitonin antagonists and the human calcitonin receptor using photoaffinity labeling

Fish-like calcitonins (CTs), such as salmon CT (sCT), are widely used clinically in the treatment of bone-related disorders; however, the molecular basis for CT binding to its receptor, a class II G protein-coupled receptor, is not well defined. In this study we have used photoaffinity labeling to identify proximity sites between CT and its receptor. Two analogues of the antagonist sCT(8-32) containing a single photolabile p-benzoyl-l-phenylalanine (Bpa) residue in position 8 or 19 were used. Both analogues retained high affinity for the CT receptor and potently inhibited agonist-induced cAMP production. The [Bpa(19)]sCT(8-32) analogue cross-linked to the receptor at or near the equivalent cross-linking site of the full-length peptide, within the fragment Cys(134)-Lys(141) (within the amino terminus of the receptor, adjacent to transmembrane 1) (Pham, V., Wade, J. D., Purdue, B. W., and Sexton, P. M. (2004) J. Biol. Chem. 279, 6720-6729). In contrast, proteolytic mapping and mutational analysis identified Met(49) as the cross-linking site for [Bpa(8)]sCT(8-32). This site differed from the previously identified cross-linking site of the agonist [Bpa(8)]human CT (Dong, M., Pinon, D. I., Cox, R. F., and Miller, L. J. (2004) J. Biol. Chem. 279, 31177-31182) and may provide evidence for conformational differences between interaction with active and inactive state receptors. Molecular modeling suggests that the difference in cross-linking between the two Bpa(8) analogues can be accounted for by a relatively small change in peptide orientation. The model was also consistent with cooperative interaction between the receptor amino terminus and the receptor core.     

Temperature-dependent variations of ligand-receptor contact points in hAT(1).

Photoaffinity labelling is regularly used to investigate proteins, including peptidergic G protein-coupled receptors (GPCR). To this purpose benzophenone photolabels have been widely used to identify many contact residues in ligand-binding pockets. The three-dimensional binding environment of the human angiotensin II type 1 receptor hAT(1) has been determined using an iterative methionine mutagenesis strategy based on the photochemical properties and preferential incorporation of benzophenone onto methionine. This has led to the construction of a ligand-bound receptor structure. The present study investigated the effect of temperature on the accessibility of some of these contact points. The hAT(1) receptor and two representative Met mutants (H256M-hAT(1) and F293M-hAT(1)) from the iterative mutagenesis study were photolabelled with the benzophenone-ligand (125)I-[Sar(1), Bpa(8)]AngII at temperatures ranging from - 15 degrees C to 37 degrees C. Labelled receptors were partially purified and digested with cyanogen bromide to identify the contact points or segments. There were no changes in receptor contacts or labelling in the 7th transmembrane domains (TMD) of hAT(1) and F293M-hAT(1) across the temperature range. However, a temperature-dependent change in the ligand-receptor contact of H256M-hAT(1) was observed. At - 15 degrees C, H256M labelling was identical to that of hAT(1), indicating that the interaction was specific to the 7th TMD. Significant labelling changes were observed at higher temperatures and at 37 degrees C labelling occurred almost exclusively at mutated residue H256M-hAT(1) in the 6th TMD. Simultaneous competitive labelling of different areas of this target protein indicated that the ligand-receptor structure became increasingly fluctual at physiological temperatures, while a more compact, low mobility, and low energy conformation prevailed at low temperatures.     

Photoaffinity cross-linking of the corticotropin-releasing factor receptor type 1 with photoreactive urocortin analogues

Interaction of natural peptide ligands with class 2 GPCRs, which are targets of biologically important hormones such as glucagon, secretin, and corticotropin-releasing factor (CRF), occurs with a common orientation, in that the ligand C-terminus binds to the extracellular receptor N-terminus, whereas the ligand N-terminus binds to the receptor juxtamembrane domain. N-Terminal truncation, by eight amino acids in the case of CRF, leads to antagonists, suggesting those residues constitute the receptor activating sequence. Here, we identified by photoaffinity cross-linking using p-benzoyl-l-phenylalanine (Bpa) analogues of urocortin (Ucn) the most affine CRF receptor agonist, interaction domains of CRF(1) receptor with Bpa residues at exclusive positions. Specific cleavage patterns of the corresponding ligand-receptor complexes, obtained using several cleavage methods in combination with SDS-PAGE for fragment size determination, showed that a Bpa group located N-terminally or in position 12 binds at the second and such in position 17 or 22 at the first extracellular receptor loop. Our results indicate that the very N-terminal ligand residues (1-11), which are responsible for receptor activation, are oriented to the juxtamembrane domain by interaction of amino acid residues 12, 17, and 22. Our findings contradict a recently proposed interaction model derived from ligand interaction with a soluble receptor N-terminus, indicating that conclusions drawn from such a reduced system may be of limited value to understand the interaction with the full-length receptor.     

Interaction of a cationic polymer with negatively charged proteoliposomes

In the present study, we have analyzed a previously identified constitutively active pituitary adenylate cyclase activating polypeptide (PACAP) type I (PAC1) receptor with a deletion of the single amino acid residue Glu(261) (Y.-J. Cao, G. Gimpl, F. Fahrenholz, A mutation of second intracellular loop of pituitary adenylate cyclase activating polypeptide type I receptor confers constitutive receptor activation, FEBS Lett. 469 (2000)). This glutamic acid residue is highly conserved within the second intracellular loop of class II G protein-coupled receptors and may thus be of importance for many members of this receptor class. To explore the molecular characteristics of this mutant receptor, we performed photoaffinity labeling using previously defined photoreactive PACAP analogues. In COS cells, the PAC1 receptor was expressed in two differently glycosylated forms: a M(r) 75,000 and a M(r) 55,000 form. According to partial deglycosylation, at least three carbohydrate chains may exist in the rat PAC1 receptor expressed in COS cells. The constitutively active PAC1 receptor was expressed at the surface of COS-7 cells at the same density as the wild-type receptor. With respect to the different photoreactive PACAP analogues, the labeling specificity was the same for the wild-type versus mutant receptor: (125)I-[Lys(15)(pBz(2))]-PACAP-27 and (125)I-[Bpa(22)]-PACAP-27 were efficiently incorporated into each of the receptors, whereas (125)I-[Bpa(6)]-PACAP-27 labeled each of the receptors only to a negligible extent. This suggests that both receptors have the same or at least a very similar hormone binding site which is in close contact to Tyr(22) and Lys(15) located in the carboxy-terminal alpha-helical region of the PACAP-27 molecule. However, in comparison with the wild-type PAC1 receptor, the constitutively active receptor showed a markedly (approx. 6--8-fold) enhanced photoaffinity labeling efficiency in particular of the high glycosylated form. The enzymatically deglycosylated rat PAC1 receptor was efficiently labeled by photoreactive PACAP analogues. In contrast, nonglycosylated PAC1 receptors produced by tunicamycin treatment of the transfected COS-7 cells showed a 30-fold lower affinity for PACAP-27 and were capable of signal transduction with 30--50-fold lower potency as compared with the glycosylated PAC1 receptors.     

Spatial proximity between a photolabile residue in position 19 of salmon calcitonin and the amino terminus of the human calcitonin receptor

Calcitonins are 32-amino acid peptide hormones with both peripheral and central actions mediated via specific cell surface receptors, which belong to the class II subfamily of G protein-coupled receptors. Understanding receptor function, particularly in terms of ligand recognition by calcitonin receptors, may aid in the rational design of calcitonin analogs with increased potency and improved selectivity. To directly identify sites of proximity between calcitonin and its receptor, we carried out photoaffinity labeling studies followed by protein digestion and mapping of the radiolabeled photoconjugated receptor. A fully active salmon calcitonin analog [Arg(11,18),Bpa19]sCT, incorporating a photolabile p-benzoyl-L-phenylalanine into position 19 of the ligand, has been used to demonstrate spatial proximity between residue 19 of the peptide and the amino-terminal extracellular domain of the receptor. Cyanogen bromide cleavage together with endoproteinase Asp-N digestion indicated that binding was predominantly to the region delimited by receptor residues Cys134 and Met187. Binding to this fragment was supported further by cyanogen bromide-digestion of receptors that were mutated to remove the predicted cleavage site at Met133 (M133A, M133L). Binding within the 54-amino acid fragment was refined further by digestion with endoproteinase Lys-C to the 8-amino acid region corresponding to Cys134-Lys141. These results provide the first direct demonstration of a contact domain between salmon calcitonin and its receptor and will contribute toward modeling of the calcitonin-receptor interface.     

Residues 293 and 294 are ligand contact points of the human angiotensin type 1 receptor

The human angiotensin II type 1 receptor (hAT(1)) was photolabeled with a high-affinity radiolabeled photoreactive analogue of AngII, (125)I-[Sar(1), Val(5), p-Benzoyl-L-phenylalanine(8)]AngII ((125)I-[Sar(1),Bpa(8)]AngII). Chemical cleavage with CNBr produced a 7 kDa fragment (285-334) of the C-terminal portion of the hAT(1). Manual Edman radiosequencing of photolabeled, per-acetylated, and CNBr-fragmented receptor showed that ligand incorporation occurred through Phe(293) and Asn(294) within the seventh transmembrane domain of the hAT(1). Receptor mutants with Met introduced at the presumed contact residues, F293M and N294M, were photolabeled and then digested with CNBr. SDS-PAGE analysis of those digested mutant receptors confirmed the contact positions 293 and 294 through ligand release induced by CNBr digestion. Additional receptor mutants with Met residues introduced into the N- and C-terminal proximity of those residues 293 and 294 of the hAT(1) produced, upon photolabeling and CNBr digestion, fragmentation patterns compatible only with the above contact residues. These data indicate that the C-terminal residue of AngII interacts with residues 293 and 294 of the seventh transmembrane domain of the human AT(1) receptor. Taking into account a second receptor-ligand contact at the second extracellular loop and residue 3 of AngII (Boucard, A. A., Wilkes, B. C., Laporte, S. A., Escher, E., Guillemette, G., and Leduc, R. (2000) Biochemistry 39, 9662-70) the Ang II molecule must adopt an extended structure in the AngII binding pocket.     

Molecular characterization of the substance P*neurokinin-1 receptor complex: development of an experimentally based model

Molecular models for the interaction of substance P (SP) with its G protein-coupled receptor, the neurokinin-1 receptor (NK-1R), have been developed. The ligand.receptor complex is based on experimental data from a series of photoaffinity labeling experiments and spectroscopic structural studies of extracellular domains of the NK-1R. Using the ligand/receptor contact points derived from incorporation of photolabile probes (p-benzoylphenylalanine (Bpa)) into SP at positions 3, 4, and 8 and molecular dynamics simulations, the topological arrangement of SP within the NK-1R is explored. The model incorporates the structural features, determined by high resolution NMR studies, of the second extracellular loop (EC2), containing contact points Met(174) and Met(181), providing important experimentally based conformational preferences for the simulations. Extensive molecular dynamics simulations were carried out to probe the nature of the two contact points identified for the Bpa(3)SP analogue (Bremer, A. A., Leeman, S. E., and Boyd, N. D. (2001) J. Biol. Chem. 276, 22857-22861), examining modes of ligand binding in which the contact points are fulfilled sequentially or simultaneously. The resulting ligand.receptor complex has the N terminus of SP projecting toward transmembrane helix (TM) 1 and TM2, exposed to the solvent. The C terminus of SP is located in proximity to TM5 and TM6, deeper into the central core of the receptor. The central portion of the ligand, adopting a helical loop conformation, is found to align with the helices of the central regions EC2 and EC3, forming important interactions with both of these extracellular domains. The model developed here allows for atomic insight into the biochemical data currently available and guides targeting of future experiments to probe specific ligand/receptor interactions and thereby furthers our understanding of the functioning of this important neuropeptide system.     

Synthesis of an agonistic, difluoro-azido photolabel of angiotensin II and labeling of the AT1 receptor: transmembrane domains 3, 6, and 7 form the ligand-binding pocket

p-Azido-phenylalanine has been frequently used for photoaffinity labeling of target proteins such as the angiotensin receptors. However, chemical studies showed that simple aryl nitrenes first react intramolecularly, forming a semistable cyclic keteneimine and then reacting with nucleophile residues in the target structure like those of lysine and arginine. We synthesized 3,5-difluoro-4-azidophenylalanine where the formation of the keteneimine is prevented and where photoincorporation should be due to nonselective nitrene insertion only. This new amino acid was introduced in position 8 of angiotensin II and compared with the corresponding azidophenylalanine peptide using human AT1 receptor as target. The new photolabel maintained full agonist activity and a similar yield of photolabeling but without the previously observed gradual hydrolysis. Several selective proteolyses of the labeled receptor indicate that the new photolabel forms three simultaneous contact regions on the hAT1 receptor, suggestive of a nonselective behavior of the photolabel. A major contact was established in the sixth transmembrane domain but also in the third and seventh domain. Our results are in excellent agreement with those recently obtained from methionine proximity assay studies.     

Identification of two pairs of spatially approximated residues within the carboxyl terminus of secretin and its receptor

The carboxyl-terminal domains of secretin family peptides have been shown to contain key determinants for high affinity binding to their receptors. In this work, we have examined the interaction between carboxyl-terminal residues within secretin and the prototypic secretin receptor. We previously utilized photoaffinity labeling to demonstrate spatial approximation between secretin residue 22 and the receptor domain that includes the first 30 residues of the amino terminus (Dong, M., Wang, Y., Pinon, D. I., Hadac, E. M., and Miller, L. J. (1999) J. Biol. Chem. 274, 903-909). Here, we further refined the site of labeling with the p-benzoyl-phenylalanine (Bpa(22)) probe to receptor residue Leu(17) using progressive cleavage of wild type and mutant secretin receptors (V13M and V16M) and sequence analysis. We also developed a new probe incorporating a photolabile Bpa at position 26 of secretin, closer to its carboxyl terminus. This analogue was also a potent agonist (EC(50) = 72 +/- 6 pm) and bound to the secretin receptor specifically and with high affinity (K(i) = 10.3 +/- 2.4 nm). It covalently labeled the secretin receptor at a single site saturably and specifically. This was localized to the segment between residues Gly(34) and Ala(41) using chemical and enzymatic cleavage of labeled wild type and A41M mutant receptor constructs and immunoprecipitation of epitope-tagged receptor fragments. Radiochemical sequencing identified the site of covalent attachment as residue Leu(36). These new insights, along with our recent report of contact between residue 6 within the amino-terminal half of secretin and this same amino-terminal region of this receptor (Dong, M., Wang, Y., Hadac, E. M., Pinon, D. I., Holicky, E. L., and Miller, L. J. (1999) J. Biol. Chem. 274, 19161-19167), support a key role for this region, making the molecular details of this interaction of major interest.     

Identification of a contact region between the tridecapeptide alpha-factor mating pheromone of Saccharomyces cerevisiae and its G protein-coupled receptor by photoaffinity labeling

Saccharomyces cerevisiae haploid cells communicate with their opposite mating type through peptide pheromones (alpha-factor and a-factor) that activate G protein-coupled receptors (GPCRs). S. cerevisiaewas used as a model system for the study of peptide-responsive GPCRs. Here, we detail the synthesis and characterization of a number of alpha-factor (Trp-His-Trp-Leu-Gln-Leu-Lys-Pro-Gly-Gln-Pro-Met-Tyr) pheromone analogues containing the photo-cross-linkable group 4-benzoyl-L-phenylalanine (Bpa). Following characterization, one analogue, [Bpa(1), Tyr(3), Arg(7), Phe(13)]alpha-factor, was radioiodinated and used as a probe for Ste2p, the GPCR for alpha-factor. Binding of the di-iodinated probe was saturable (K(d) = 200 nM) and competable by alpha-factor. Cross-linking into Ste2p was specific for this receptor and reversed by the wild-type pheromone. Chemical and enzymatic cleavage of the receptor/radioprobe complex indicated that cross-linking occurred on a portion of Ste2p spanning residues 251-294 which encompasses transmembrane domain 6, the extracellular loop between transmembrane domains 6 and 7, and transmembrane domain 7. This fragment was verified using T7-epitope-tagged Ste2p and a biotinylated, photoactivatable alpha-factor. After cross-linking with the biotinylated photoprobe and trypsin cleavage, the cross-linked receptor fragment was revealed by both an anti T7-epitope antibody and a biotin probe. This is the first determination of a specific contact region between a Class IV GPCR and its ligand. The results demonstrate that Bpa alpha-factor probes are useful in determining contacts between alpha-factor and Ste2p and initiate mapping of the ligand binding site of this GPCR.     

Endocytosis of the AT1A angiotensin receptor is independent of ubiquitylation of its cytoplasmic serine/threonine-rich region

Agonist-induced internalisation of the rat type 1A (AT(1A)) angiotensin II receptor is associated with phosphorylation of a serine/threonine-rich region in its cytoplasmic tail. In yeast, hyperphosphorylation of the alpha-factor pheromone receptor regulates endocytosis of the receptor by facilitating the monoubiquitylation of its cytoplasmic tail on lysine residues. The role of receptor ubiquitylation in AT(1A) receptor internalisation was evaluated by deletion or replacement of lysine residues in its agonist-sensitive serine/threonine-rich region. Expression of such receptor mutants in CHO cells showed that these modifications had no detectable effect on the angiotensin II-induced endocytosis of the AT(1A) receptor. Furthermore, fusion of ubiquitin in-frame to an internalisation-deficient AT(1A) receptor mutant with a truncated carboxyl-terminal tail did not restore the endocytosis of the resulting chimeric receptor. No impairment of receptor internalisation was observed after substitution of all lysine residues in the serine/threonine-rich region at saturating angiotensin II concentrations, where endocytosis occurs by a beta-arrestin and dynamin independent mechanism. Taken together, these data demonstrate that ubiquitylation of the cytoplasmic serine/threonine-rich region of the AT(1A) receptor on lysine residues is not required for its agonist-induced internalisation, and suggest that endocytosis of mammalian G protein-coupled receptors (GPCRs) occurs by a different mechanism than that of yeast GPCRs.     

Conformational features of a synthetic model of the first extracellular loop of the angiotensin II AT1A receptor.

The angiotensin II AT1A receptor belongs to the G-protein coupled receptors (GPCRs). Like other membrane proteins, GPCRs are not easily amenable to direct structure determination by the currently available methods. The peptide encompassing the putative first extracellular loop of AT1A (residues Thr88-Leu100, el1) has been synthesized along with a cyclic model where the linear peptide has been covalently linked to a template designed to keep the distance between the peptide termini as expected in the receptor. The conformational features of the two molecules have been studied using circular dichroism and NMR techniques. The region W94PFG97 forms a type-II beta-turn and undergoes a Trp-Pro peptide bond cis-trans isomerization in both peptides confirming that these characteristics are intrinsic to el1. In addition, the presence of the spacer seems to modulate the flexibility of the peptide.     

Diffuse pharmacophoric domains of vasoactive intestinal peptide (VIP) and further insights into the interaction of VIP with the N-terminal ectodomain of human VPAC1 receptor by photoaffinity labeling with [Bpa6]-VIP

The widespread 28-amino acid neuropeptide vasoactive intestinal peptide (VIP) exerts its many biological effects through interaction with serpentine class II G protein-coupled receptors named VPAC receptors. We previously provided evidence for a physical contact between the side chain at position 22 of VIP and the N-terminal ectodomain of the hVPAC1 receptor (Tan, Y. V., Couvineau, A., Van Rampelbergh, J., and Laburthe, M. (2003) J. Biol. Chem. 278, 36531-36536). We explored here the contact site between hVPAC1 receptor and the side chain at position 6 of VIP by photoaffinity labeling. The photoreactive para-benzoyl-l-Phe (Bpa) was substituted for Phe(6) in VIP resulting in [Bpa(6)]-VIP, which was shown to be a hVPAC1 receptor agonist in Chinese hamster ovary cells stably expressing the recombinant receptor. After obtaining the covalent (125)I-[Bpa(6)-VIP].hVPAC1 receptor complex, it was sequentially cleaved by cyanogen bromide, peptide N-glycosidase F, endopeptidase Glu-C, and trypsin, and the cleavage products were analyzed by electrophoresis. The data demonstrated that (125)I-[Bpa(6)-VIP] were covalently attached to the short 104-108 fragment within the N-terminal ectodomain of the receptor. The data were confirmed by creation of a receptor mutant with new CNBr cleavage site. In a three-dimensional model of the receptor N-terminal ectodomain, this fragment was located on one edge of the putative VIP-binding groove and was adjacent to the fragment covalently attached to the side chain at position 22 of VIP. Altogether these data showed that the central part of VIP, at least between Phe(6) and Tyr(22), interacts with the N-terminal ectodomain of the hVPAC1 receptor.     

Determination of peptide contact points in the human angiotensin II type I receptor (AT1) with photosensitive analogs of angiotensin II

To identify ligand-binding domains of Angiotensin II (AngII) type 1 receptor (AT1), two different radiolabeled photoreactive AngII analogs were prepared by replacing either the first or the last amino acid of the octapeptide by p-benzoyl-L-phenylalanine (Bpa). High yield, specific labeling of the AT1 receptor was obtained with the 125I-[Sar1,Bpa8]AngII analog. Digestion of the covalent 125I-[Sar1,Bpa8]AngII-AT1 complex with V8 protease generated two major fragments of 15.8 kDa and 17.8 kDa, as determined by SDS-PAGE. Treatment of the [Sar1,Bpa8]AngII-AT1 complex with cyanogen bromide produced a major fragment of 7.5 kDa which, upon further digestion with endoproteinase Lys-C, generated a fragment of 3.6 kDa. Since the 7.5-kDa fragment was sensitive to hydrolysis by 2-nitro-5-thiocyanobenzoic acid, we circumscribed the labeling site of 125I-[Sar1,Bpa8]AngII within amino acids 285 and 295 of the AT1 receptor. When the AT1 receptor was photolabeled with 125I-[Bpa1]AngII, a poor incorporation yield was obtained. Cleavage of the labeled receptor with endoproteinase Lys-C produced a glycopeptide of 31 kDa, which upon deglycosylation showed an apparent molecular mass of 7.5 kDa, delimiting the labeling site of 125I-[Bpa1]AngII within amino acids 147 and 199 of the AT1 receptor. CNBr digestion of the hAT1 I165M mutant receptor narrowed down the labeling site to the fragment 166-199. Taken together, these results indicate that the seventh transmembrane domain of the AT1 receptor interacts strongly with the C-terminal amino acid of [Sar1, Bpa8]AngII interacts with the second extracellular loop of the AT1 receptor.     

Differential docking of high-affinity peptide ligands to type A and B cholecystokinin receptors demonstrated by photoaffinity labeling

Type A and B cholecystokinin (CCK) receptors are highly homologous members of the class-I family of G protein-coupled receptors that bind CCK with high affinity. However, they have divergent structural specificities, with the type A receptor requiring seven carboxyl-terminal residues including a sulfated tyrosine and the type B receptor requiring only the carboxyl-terminal tetrapeptide. The aim of this work was to utilize affinity labeling to determine spatial approximations with photolabile p-benzoyl-l-phenylalanine (Bpa) residues sited at each end of CCK as docked at the type B CCK receptor, contrasting this with analogous work using similar probes docked at the type A receptor. Both probes were fully efficacious, potent agonists that stimulated intracellular calcium in receptor-bearing CHO-CCKBR cells (EC(50) values: Bpa(24) probe, 41 +/- 9 pM; Bpa(33) probe, 15 +/- 3.3 pM). They bound specifically, with high affinity (K(i) values: Bpa(24) probe, 0.60 +/- 0.17 nM; Bpa(33) probe, 0.58 +/- 0.11 nM). Cyanogen bromide cleavage of the covalently labeled receptor suggested the first extracellular loop as the region of labeling by each probe, distinct from the type A CCK receptor regions labeled using the same probes (third loop and amino-terminal tail, respectively). This was confirmed by subsequent enzymatic and chemical cleavage of labeled wild-type and mutant receptors. Sequential cycles of Edman degradation of labeled receptor fragments identified the specific residues within loop one labeled by each probe (Bpa(24) probe labeled Phe(122); Bpa(33) probe labeled Thr(119)). This provides a direct demonstration of distinct modes of docking the same high-affinity ligand to highly homologous receptors.