Identification of the hammerhead ribozyme metal ion binding site responsible for rescue of the deleterious effect of a cleavage site phosphorothioate

The hammerhead ribozyme crystal structure identified a specific metal ion binding site referred to as the P9/G10.1 site. Although this metal ion binding site is approximately 20 A away from the cleavage site, its disruption is highly deleterious for catalysis. Additional published results have suggested that the pro-R(P) oxygen at the cleavage site is coordinated by a metal ion in the reaction's transition state. Herein, we report a study on Cd(2+) rescue of the deleterious phosphorothioate substitution at the cleavage site. Under all conditions, the Cd(2+) concentration dependence can be accounted for by binding of a single rescuing metal ion. The affinity of the rescuing Cd(2+) is sensitive to perturbations at the P9/G10.1 site but not at the cleavage site or other sites in the conserved core. These observations led to a model in which a metal ion bound at the P9/G10.1 site in the ground state acquires an additional interaction with the cleavage site prior to and in the transition state. A titration experiment ruled out the possibility that a second tight-binding metal ion (< 10 microM) is involved in the rescue, further supporting the single metal ion model. Additionally, weakening Cd(2+) binding at the P9/G10.1 site did not result in the biphasic binding curve predicted from other models involving two metal ions. The large stereospecific thio-effects at the P9/G10.1 and the cleavage site suggest that there are interactions with these oxygen atoms in the normal reaction that are compromised by replacement of oxygen with sulfur. The simplest interpretation of the substantial rescue by Cd(2+) is that these atoms interact with a common metal ion in the normal reaction. Furthermore, base deletions and functional group modifications have similar energetic effects on the transition state in the Cd(2+)-rescued phosphorothioate reaction and the wild-type reaction, further supporting the model that a metal ion bridges the P9/G10.1 and the cleavage site in the normal reaction (i.e., with phosphate linkages rather than phosphorothioate linkages). These results suggest that the hammerhead undergoes a substantial conformational rearrangement to attain its catalytic conformation. Such rearrangements appear to be general features of small functional RNAs, presumably reflecting their structural limitations.     

Functional identification of ligands for a catalytic metal ion in group I introns

Many enzymes use metal ions within their active sites to achieve enormous rate acceleration. Understanding how metal ions mediate catalysis requires elucidation of metal ion interactions with both the enzyme and the substrate(s). The three-dimensional arrangement determined by X-ray crystallography provides a powerful starting point for identifying ground state interactions, but only functional studies can establish and interrogate transition state interactions. The Tetrahymena group I ribozyme is a paradigm for the study of RNA catalysis, and previous work using atomic mutagenesis and quantitative analysis of metal ion rescue behavior identified catalytic metal ions making five contacts with the substrate atoms. Here, we have combined atomic mutagenesis with site-specific phosphorothioate substitutions in the ribozyme backbone to establish transition state ligands on the ribozyme for one of the catalytic metal ions, referred to as M A. We identified the pro-S P oxygen atoms at nucleotides C208, A304, and A306 as ground state ligands for M A, verifying interactions suggested by the Azoarcus crystal structures. We further established that these interactions are present in the chemical transition state, a conclusion that requires functional studies, such as those carried out herein. Elucidating these active site connections is a crucial step toward an in-depth understanding of how specific structural features of the group I intron lead to catalysis.     

The two steps of group II intron self-splicing are mechanistically distinguishable.

The two transesterification reactions catalyzed by self-splicing group II introns take place in either two active sites or two conformations of a single active site involving rearrangements of the positions of the reacting groups. We have investigated the effects on the rates of the chemical steps of the two reactions due to sulfur substitution of nonbridging oxygens at both the 5' and 3' splice sites as well as the deoxyribose substitution of the ribose 2' hydroxyl group at the 5' splice site. The data suggest that the two active sites differ in their interactions with several of these groups. Specifically, sulfur substitution of the pro-Sp nonbridging oxygen at the 5' splice site reduces the chemical rate of the step one branching reaction by at least 250-fold, whereas substitution of the pro-Sp oxygen at the 3' splice site has only a 4.5-fold effect on the chemical rate of step two. Previous work demonstrated that the Rp phosphorothioate substitutions at both the 5' and 3' splice sites reduced the rate of both steps of splicing to an undetectable level. These results suggest that either two distinct active sites catalyze the two steps or that more significant alterations must be made in a single bifunctional active site to accommodate the two different reactions.     

X-ray crystal structures of active site mutants of the vanadium-containing chloroperoxidase from the fungus Curvularia inaequalis

The X-ray structures of the chloroperoxidase from Curvularia inaequalis, heterologously expressed in Saccharomyces cerevisiae, have been determined both in its apo and in its holo forms at 1.66 and 2.11?Å resolution, respectively. The crystal structures reveal that the overall structure of this enzyme remains nearly unaltered, particularly at the metal binding site. At the active site of the apo-chloroperoxidase structure a clearly defined sulfate ion was found, partially stabilised through electrostatic interactions and hydrogen bonds with positively charged residues involved in the interactions with the vanadate in the native protein. The vanadate binding pocket seems to form a very rigid frame stabilising oxyanion binding. The rigidity of this active site matrix is the result of a large number of hydrogen bonding interactions involving side chains and the main chain of residues lining the active site. The structures of single site mutants to alanine of the catalytic residue His404 and the vanadium protein ligand His496 have also been analysed. Additionally we determined the structural effects of mutations to alanine of residue Arg360, directly involved in the compensation of the negative charge of the vanadate group, and of residue Asp292 involved in forming a salt bridge with Arg490 which also interacts with the vanadate. The enzymatic chlorinating activity is drastically reduced to approximately 1% in mutants D292A, H404A and H496A. The structures of the mutants confirm the view of the active site of this chloroperoxidase as a rigid matrix providing an oxyanion binding site. No large changes are observed at the active site for any of the analysed mutants. The empty space left by replacement of large side chains by alanines is usually occupied by a new solvent molecule which partially replaces the hydrogen bonding interactions to the vanadate. The new solvent molecules additionally replace part of the interactions the mutated side chains were making to other residues lining the active site frame. When this is not possible, another side chain in the proximity of the mutated residue moves in order to satisfy the hydrogen bonding potential of the residues located at the active site frame.     

Substrate recognition and induced DNA deformation by transposase at the target-capture stage of Tn10 transposition

The bacterial transposon Tn10 inserts preferentially into sites that conform to a 9 bp consensus sequence: 5' NGCTNAGCN 3'. However, this sequence is not on its own sufficient to confer target specificity as the base-pairs flanking this sequence also contribute significantly to target-site selection. We have performed a series of "contact-probing experiments" to define directly the protein-DNA interactions that govern target-site selection in the Tn10 system. The HisG1 hotspot for Tn10 insertion was the main focus here. We infer that there is a rather broad zone ( approximately 24 bp) of contact between transposase and target DNA in the target-capture complex. This includes base-specific contacts at all of the purine residues in the consensus positions of the target core and primarily backbone contacts out to 7-8 bp in the two flanking regions immediately adjacent to the core. Also, highly localized sites of chemical hypersensitivity are identified that reveal symmetrically disposed deformations in DNA structure in the target-capture complex. Furthermore, the level of strand transfer is shown to be reduced by phosphorothioate substitution of phosphate groups at or close to the sites of target DNA deformation. Interestingly, for one particular target DNA, a mutant form of HisG1 called MutF, the above phosphorothioate inhibition of strand transfer is suppressed by replacing Mg(2+) with Mn(2+). Based on these results a model for sequence-specific target capture is proposed which attempts to define possible relationships between transposase interactions with the target core and flanking sequences, transposase-induced DNA deformation of the target site and divalent metal ion binding to the target-capture complex.     

Metal-dependent DNA cleavage mechanism of the I-CreI LAGLIDADG homing endonuclease

The LAGLIDADG homing endonucleases include free-standing homodimers, pseudosymmetric monomers, and related enzyme domains embedded within inteins. DNA-bound structures of homodimeric I-CreI and monomeric I-SceI indicate that three catalytic divalent metal ions are distributed across a pair of overlapping active sites, with one shared metal participating in both strand cleavage reactions. These structures differ in the precise position and binding interactions of the metals. We have studied the metal dependence for the I-CreI homodimer using site-directed mutagenesis of active site residues and assays of binding affinity and cleavage activity. We have also reassessed the binding of a nonactivating metal ion (calcium) in the wild-type enzyme-substrate complex, and determined the DNA-bound structure of two inactive enzyme mutants. The conclusion of these studies is that the catalytic mechanism of symmetric LAGLIDADG homing endonucleases, and probably many of their monomeric cousins, involves a canonical two-metal mechanism in each of two active sites, which are chemically and structurally tethered to one another by a shared metal ion. Failure to occupy the shared metal site, as observed in the presence of calcium or when the metal-binding side chain from the LAGLIDADG motif (Asp 20) is mutated to asparagine, prevents cleavage by the enzyme.     

Sequential structural changes of Escherichia coli thioesterase/protease I in the serial formation of Michaelis and tetrahedral complexes with diethyl p-nitrophenyl phosphate

Escherichia coli thioesterase/protease I (TEP-I) belongs to a new subclass of lipolytic enzymes of the serine hydrolase superfamily. Here we report the first direct NMR observation of the formation of the Michaelis complex (MC) between TEP-I and diethyl p-nitrophenyl phosphate (DENP), an active site directed inhibitor of serine protease, and its subsequent conversion to the tetrahedral complex (TC). NMR, ESI-MS, and kinetic data showed that DENP binds to TEP-I in a two-step process, a fast formation of MC followed by a slow conversion to TC. NMR chemical shift perturbation further revealed that perturbations were confined mainly to four conserved segments comprising the active site. Comparable magnitudes of chemical shift perturbations were detected in both steps. The largest chemical shift perturbation occurred around the catalytic Ser(10). In MC, the conformation of the mobile Ser(10) was stabilized, and its amide resonance became observable. From the large chemical shift perturbation upon conversion from MC to TC, we propose that the amide protons of Ser(10) and Gly(44) serve as the oxyanion hole proton donors that stabilize the tetrahedral adduct. The pattern of residues perturbed in both steps suggests a sequential, stepwise structural change upon binding of DENP. The present study also demonstrates the important catalytic roles of conserved residues in the SGNH family of proteins.     

Mechanistic inferences from the binding of ligands to LpxC, a metal-dependent deacetylase

The metal-dependent deacetylase LpxC catalyzes the first committed step of lipid A biosynthesis in Gram-negative bacteria. Accordingly, LpxC is an attractive target for the development of inhibitors that may serve as potential new antibiotics for the treatment of Gram-negative bacterial infections. Here, we report the 2.7 A resolution X-ray crystal structure of LpxC complexed with the substrate analogue inhibitor TU-514 and the 2.0 A resolution structure of LpxC complexed with imidazole. The X-ray crystal structure of LpxC complexed with TU-514 allows for a detailed examination of the coordination geometry of the catalytic zinc ion and other enzyme-inhibitor interactions in the active site. The hydroxamate group of TU-514 forms a bidentate chelate complex with the zinc ion and makes hydrogen bond interactions with conserved active site residues E78, H265, and T191. The inhibitor C-4 hydroxyl group makes direct hydrogen bond interactions with E197 and H58. Finally, the C-3 myristate moiety of the inhibitor binds in the hydrophobic tunnel of the active site. These intermolecular interactions provide a foundation for understanding structural aspects of enzyme-substrate and enzyme-inhibitor affinity. Comparison of the TU-514 complex with cacodylate and imidazole complexes suggests a possible substrate diphosphate binding site and highlights residues that may stabilize the tetrahedral intermediate and its flanking transition states in catalysis. Evidence of a catalytic zinc ion in the native zinc enzyme coordinated by H79, H238, D242, and two water molecules with square pyramidal geometry is also presented. These results suggest that the native state of this metallohydrolase may contain a pentacoordinate zinc ion, which contrasts with the native states of archetypical zinc hydrolases such as thermolysin and carboxypeptidase A.     

M42 aminopeptidase catalytic site: the structural and functional role of a strictly conserved aspartate residue

The M42 aminopeptidases are a family of dinuclear aminopeptidases widely distributed in Prokaryotes. They are potentially associated to the proteasome, achieving complete peptide destruction. Their most peculiar characteristic is their quaternary structure, a tetrahedron-shaped particle made of twelve subunits. The catalytic site of M42 aminopeptidases is defined by seven conserved residues. Five of them are involved in metal ion binding which is important to maintain both the activity and the oligomeric state. The sixth conserved residue, a glutamate, is the catalytic base deprotonating the water molecule during peptide bond hydrolysis. The seventh residue is an aspartate whose function remains poorly understood. This aspartate residue, however, must have a critical role as it is strictly conserved in all MH clan enzymes. It forms some kind of catalytic triad with the histidine residue and the metal ion of the M2 binding site. We assess its role in TmPep1050, an M42 aminopeptidase of Thermotoga maritima, through a mutational approach. Asp-62 was substituted with alanine, asparagine, or glutamate residue. The Asp-62 substitutions completely abolished TmPep1050 activity and impeded dodecamer formation. They also interfered with metal ion binding as only one cobalt ion is bound per subunit instead of two. The structure of Asp62Ala variant was solved at 1.5 Å showing how the substitution has an impact on the active site fold. We propose a structural role for Asp-62, helping to stabilize a crucial loop in the active site and to position correctly the catalytic base and a metal ion ligand of the M1 site.     

Identification of phosphates involved in catalysis by the ribozyme RNase P RNA.

The RNA subunit of ribonuclease P (RNase P RNA) is a catalytic RNA that cleaves precursor tRNAs to generate mature tRNA 5' ends. Little is known concerning the identity and arrangement of functional groups that constitute the active site of this ribozyme. We have used an RNase P RNA-substrate conjugate that undergoes rapid, accurate, and efficient self-cleavage in vitro to probe, by phosphorothioate modification-interference, functional groups required for catalysis. We identify four phosphate oxygens where substitution by sulfur significantly reduces the catalytic rate (50-200-fold). Interference at one site was partially rescued in the presence of manganese, suggesting a direct involvement in binding divalent metal ion cofactors required for catalysis. All sites are located in conserved sequence and secondary structure, and positioned adjacent to the substrate phosphate in a tertiary structure model of the ribozyme-substrate complex. The spatial arrangement of phosphorothioate-sensitive sites in RNase P RNA was found to resemble the distribution of analogous positions in the secondary and potential tertiary structures of other large catalytic RNAs.     

Auto-FACE: An NMR Based Binding Site Mapping Program for Fast Chemical Exchange Protein-Ligand Systems

Background

Nuclear Magnetic Resonance (NMR) spectroscopy offers a variety of experiments to study protein-ligand interactions at atomic resolution. Among these experiments, N Heteronuclear Single Quantum Correlation (HSQC) experiment is simple, less time consuming and highly informative in mapping the binding site of the ligand. The interpretation of N HSQC becomes ambiguous when the chemical shift perturbations are caused by non-specific interactions like allosteric changes and local structural rearrangement. Under such cases, detailed chemical exchange analysis based on chemical shift perturbation will assist in locating the binding site accurately.

Methodology/Principal Findings

We have automated the mapping of binding sites for fast chemical exchange systems using information obtained from N HSQC spectra of protein serially titrated with ligand of increasing concentrations. The automated program Auto-FACE (Auto-FAst Chemical Exchange analyzer) determines the parameters, e.g. rate of change of perturbation, binding equilibrium constant and magnitude of chemical shift perturbation to map the binding site residues. Interestingly, the rate of change of perturbation at lower ligand concentration is highly sensitive in differentiating the binding site residues from the non-binding site residues. To validate this program, the interaction between the protein and the ligand BH3I-1 was studied. Residues in the hydrophobic BH3 binding groove of were easily identified to be crucial for interaction with BH3I-1 from other residues that also exhibited perturbation. The geometrically averaged equilibrium constant () calculated for the residues present at the identified binding site is consistent with the values obtained by other techniques like isothermal calorimetry and fluorescence polarization assays (). Adjacent to the primary site, an additional binding site was identified which had an affinity of 3.8 times weaker than the former one. Further NMR based model fitting for individual residues suggest single site model for residues present at these binding sites and two site model for residues present between these sites. This implies that chemical shift perturbation can represent the local binding event much more accurately than the global binding event.

Conclusion/Significance

Detail NMR chemical shift perturbation analysis enabled binding site residues to be distinguished from non-binding site residues for accurate mapping of interaction site in complex fast exchange system between small molecule and protein. The methodology is automated and implemented in a program called “Auto-FACE”, which also allowed quantitative information of each interaction site and elucidation of binding mechanism.     

Defining the catalytic metal ion interactions in the Tetrahymena ribozyme reaction

Divalent metal ions play a crucial role in catalysis by many RNA and protein enzymes that carry out phosphoryl transfer reactions, and defining their interactions with substrates is critical for understanding the mechanism of biological phosphoryl transfer. Although a vast amount of structural work has identified metal ions bound at the active site of many phosphoryl transfer enzymes, the number of functional metal ions and the full complement of their catalytic interactions remain to be defined for any RNA or protein enzyme. Previously, thiophilic metal ion rescue and quantitative functional analyses identified the interactions of three active site metal ions with the 3'- and 2'-substrate atoms of the Tetrahymena group I ribozyme. We have now extended these approaches to probe the metal ion interactions with the nonbridging pro-S(P) oxygen of the reactive phosphoryl group. The results of this study combined with previous mechanistic work provide evidence for a novel assembly of catalytic interactions involving three active site metal ions. One metal ion coordinates the 3'-departing oxygen of the oligonucleotide substrate and the pro-S(P) oxygen of the reactive phosphoryl group; another metal ion coordinates the attacking 3'-oxygen of the guanosine nucleophile; a third metal ion bridges the 2'-hydroxyl of guanosine and the pro-S(P) oxygen of the reactive phosphoryl group. These results for the first time define a complete set of catalytic metal ion/substrate interactions for an RNA or protein enzyme catalyzing phosphoryl transfer.     

An unconventional origin of metal-ion rescue and inhibition in the Tetrahymena group I ribozyme reaction

The presence of catalytic metal ions in RNA active sites has often been inferred from metal-ion rescue of modified substrates and sometimes from inhibitory effects of alternative metal ions. Herein we report that, in the Tetrahymena group I ribozyme reaction, the deleterious effect of a thio substitution at the pro-Sp position of the reactive phosphoryl group is rescued by Mn2+. However, analysis of the reaction of this thio substrate and of substrates with other modifications strongly suggest that this rescue does not stem from a direct Mn2+ interaction with the Sp sulfur. Instead, the apparent rescue arises from a Mn2+ ion interacting with the residue immediately 3' of the cleavage site, A(+1), that stabilizes the tertiary interactions between the oligonucleotide substrate (S) and the active site. This metal site is referred to as site D herein. We also present evidence that a previously observed Ca2+ ion that inhibits the chemical step binds to metal site D. These and other observations suggest that, whereas the interactions of Mn2+ at site D are favorable for the chemical reaction, the Ca2+ at site D exerts its inhibitory effect by disrupting the alignment of the substrates within the active site. These results emphasize the vigilance necessary in the design and interpretation of metal-ion rescue and inhibition experiments. Conversely, in-depth mechanistic analysis of the effects of site-specific substrate modifications can allow the effects of specific metal ion-RNA interactions to be revealed and the properties of individual metal-ion sites to be probed, even within the sea of metal ions bound to RNA.     

The PD...(D/E)XK motif in restriction enzymes: a link between function and conformation

The active sites of Mg(II)-dependent nucleases feature a cluster of conserved charged residues which includes both acidic (Asp and Glu) and basic (Lys) side chains. In restriction enzymes, these side chains are part of the conserved PD...(D/E)XK functional sequence motif which has been implicated as being important in metal ion binding and catalytic steps. Recent work revealing the unusual behavior of the active site variant D58A of the representative PvuII endonuclease prompted speculation that the array of charged groups in the nuclease active site may also be linked to conformational behavior [Dupureur, C. M., and Conlan, L. H. (2000) Biochemistry 39, 10921-10927]. To address this issue, we analyzed the conformational behavior of active site variants of PvuII endonuclease using both NMR spectroscopic and thermodynamic methods. NMR spectroscopic analysis via (19)F and (1)H-(15)N HSQC experiments indicates that a number of side chain and backbone amide groups are perturbed upon Ala substitution at conserved active site residues Asp58, Glu68, and Lys70. Spectral changes are particularly pronounced for the lowest-activity mutants (D58A and K70A). These changes are accompanied by perturbations in conformational stability. Ala substitution at each of these positions results in 2-5 kcal/mol of stabilization over the wild-type enzyme at pH 7.7, changes which constitute increases in DeltaG(d)(H2O) of 20-50%. The pH dependencies of mutant enzyme stabilities are distinct from those of the wild type, results which confirm that these ionizable groups strongly influence stability. Wild-type enzyme stability is correlated with the ionization of groups shown to be important to metal ion binding and orientation. Correlations between spectral changes and conformational stability indicate that the latter measurements may prove useful in the evaluation of site-directed mutant restriction enzymes. More importantly, these results indicate that structure-function relationships in restriction enzyme active sites can be complex, and that the ensemble of conserved charged residues which mediate DNA hydrolysis in Mg(II)-dependent nucleases constitutes a critical link between function and conformation.     

Phosphorothioate substitution can substantially alter RNA conformation

Phosphorothioate substitution-interference experiments, routinely used to stereospecifically identify phosphoryl oxygen sites that participate in RNA-ligand binding and RNA-directed catalysis, rest in their interpretation on the untested assumption that substitution does not alter the conformation of the modified molecule from its biologically active state. Using NMR spectroscopy, we have tested this assumption by determining the structural effect of stereospecific phosphorothioate substitution at five positions in an RNA hairpin containing the binding site for bacteriophage MS2 capsid protein. At most sites, substitution has little or no effect, causing minor perturbations in the phosphate backbone and increasing the stacking among nucleotides in the hairpin loop. At one site, however, phosphorothioate substitution causes an unpaired adenine necessary for formation of the capsid protein-RNA complex to loop out of the RNA helix into the major groove. These results indicate that phosphorothioate substitution can substantially alter the conformation of RNA at positions of irregular secondary structure, complicating the use of substitution-interference experiments to study RNA structure and function.     

A fast loop-closure algorithm to accelerate residue matching in computational enzyme design

Constructing an active site on an inert scaffold is still a challenge in chemical biology. Herein, we describe the incorporation of a Newton-direction-based fast loop-closure algorithm for catalytic residue matching into our enzyme design program ProdaMatch. This was developed to determine the sites and geometries of the catalytic residues as well as the position of the transition state with high accuracy in order to satisfy the geometric constraints on the interactions between catalytic residues and the transition state. Loop-closure results for 64,827 initial loops derived from 21 loops in the test set showed that 99.51 % of the initial loops closed to within 0.05 Å in fewer than 400 iteration steps, while the large majority of the initial loops closed within 100 iteration steps. The revised version of ProdaMatch containing the novel loop-closure algorithm identified all native matches for ten scaffolds in the native active-site recapitulation test. Its high speed and accuracy when matching catalytic residues with a scaffold make this version of ProdaMatch potentially useful for scaffold selection through the incorporation of more complex theoretical enzyme models which may yield higher initial activities in de novo enzyme design.     

DNA recognition by the EcoRV restriction endonuclease probed using base analogues

The EcoRV restriction endonuclease recognises palindromic GATATC sequences and cuts between the central T and dA bases in a reaction that has an absolute requirement for a divalent metal ion, physiologically Mg(2+). Use has been made of base analogues, which delete hydrogen bonds between the protein and DNA (or hydrophobic interactions in the case of the 5-CH(3) group of thymine), to evaluate the roles of the outer two base-pairs (GATATC) in DNA recognition. Selectivity arises at both the binding steps leading to the formation of the enzyme-DNA-metal ion ternary complex (assayed by measuring the dissociation constant in the presence of the non-reactive metal Ca(2+)) and the catalytic step (evaluated using single-turnover hydrolysis in the presence of Mg(2+)), with each protein-DNA contact contributing to recognition. With the A:T base-pair, binding was reduced by the amount expected for the simple loss of a single contact; much more severe effects were observed with the G:C base-pair, suggesting additional conformational perturbation. Most of the modified bases lowered the rate of hydrolysis; furthermore, the presence of an analogue in one strand of the duplex diminished cutting at the second, unmodified strand, indicative of communication between DNA binding and the active site. The essential metal ion Mg(2+) plays a key role in mediating interactions between the DNA binding site and active centre and in many instances rescue of hydrolysis was seen with Mn(2+). It is suggested that contacts between the GATATC site are required for tight binding and for the correct assembly of metal ions and bound water at the catalytic site, functions important in providing acid/base catalysis and transition state stabilisation.     

Higher metal-ligand coordination in the catalytic site of cobalt-substituted Thermoanaerobacter brockii alcohol dehydrogenase lowers the barrier for enzyme catalysis

Thermoanaerobacter brockii alcohol dehydrogenase (TbADH) is a zinc-dependent NADP(+)/H-linked class enzyme that reversibly catalyzes the oxidation of secondary alcohols to their corresponding ketones. Cobalt substitution studies of other members of the alcohol dehydrogenase (ADH) family showed that the cobalt-containing ADHs have a similar active site structure but slightly decreased activity compared to wild-type zinc ADHs. In contrast, the cobalt-substituted TbADH (Co-TbADH) exhibits an increase in specific activity compared to the native enzyme [Bogin, O., Peretz, M., and Burstein, Y. (1997) Protein Sci. 6, 450-458]. However, the structural basis underlying this behavior is not yet clear. To shed more light on this issue, we studied the local structure and electronics at the catalytic metal site in Co-TbADH by combining X-ray absorption (XAS) and quantum chemical calculations. Importantly, we show that the first metal-ligand coordination shell of Co-TbADH is distorted compared to its native tetrahedral coordination shell and forms an octahedral structure. This is mediated presumably by the addition of two water molecules and results in more positively charged catalytic metal ions. Recently, we have shown that the metal-ligand coordination number of the zinc ion in TbADH changes dynamically during substrate turnover. These structural changes are associated with a higher coordination number of the native catalytic zinc ion and the consequent buildup of a positive charge. Here we propose that the accumulation of a higher coordination number and positive charge at the catalytic metal ion in TbADH stabilizes the structure of the catalytic transition state and hence lowers the barrier for enzyme catalysis.     

The role of magnesium ions and 2'-hydroxyl groups in the VS ribozyme-substrate interaction

The minimal substrate of the trans-cleaving Neurospora VS ribozyme has a stem-loop structure and interacts with the ribozyme by RNA tertiary interactions that remain only partially defined. The magnesium ion dependence of the catalytic parameters of a trans-cleaving VS-derived ribozyme were studied. The turnover number of the catalytic RNA was found to depend on the binding of at least three magnesium ions, with an apparent magnesium ion dissociation constant of 16mM, but K(M) was observed to be metal ion independent in the millimolar range. To address the role of 2'-hydroxyl groups of the VS substrate RNA in interactions with the ribozyme, 23 altered substrates, each with a single 2'-deoxyribonucleoside substitution, were synthesised and their kinetic properties in the VS ribozyme reaction were analysed. The removal of five 2'-hydroxyl groups, at positions G620, A621, U628, C629 and G630 inhibited the reaction, whereas at two sites, G623 and A639, reaction was stimulated by the modification. Substitution of G620 with a 2'-deoxynucleoside was expected to inhibit the reaction, in line with the critical role of this 2'-hydroxyl group in the transesterification reaction. Altered substrates in which a 2'-O-methyl nucleoside replaced A621, U628, C629 and G630 were prepared and characterised. Although removal of the hydroxyl group of A621 inhibited the turnover number of the ribozyme significantly, this activity was recovered upon 2'-O-methyl adenosine substitution, suggesting that the 2'-oxygen atom of this nucleoside forms an important contact within the ribozyme active site. A cluster of residues within the loop region of the substrate, were more modestly affected by 2'-deoxynucleoside substitution. In two cases, magnesium binding was impaired, suggesting that stem-loop I is a possible magnesium ion binding site.     

A single metal ion plays structural and chemical roles in an aminoacyl-transferase ribozyme.

Catalytically active RNA molecules rely on metal ions for structural and/or catalytic functions. Our in vitro selected aminoacyl-transferase ribozyme is no exception, as it employs a single fully hydrated Mg2+ ion for catalysis [Suga, H., et al. (1998) Biochemistry 37, 10118-10125]. Here we report the essential catalytic residues of the ribozyme and their spatial arrangement in the relation to the metal binding site. Evidence obtained using a combination of Pb2+ and Tb3+ hydrolytic cleavage assays on wild type and mutant ribozymes revealed a cooperative metal binding site that consists of the tandem G:U wobble pairs in P1 and consecutive G:U and U:A pairs in P3. The formation of this concerted Mg2+ binding site positions the P1 and P3 helices in a parallel manner, placing the L3 tetraloop in close proximity to the internal guide sequence (IGS, substrate binding site), which is adjacent to P1. Certain monovalent metal ions inhibit catalysis at low concentrations but support catalysis at high concentrations. These analyses imply that the Mg2+ ion plays both structural and chemical roles and that it brings about the significant rate acceleration in aminoacyl-transfer in concert with the L3-IGS long-range interaction.