The ald gene, encoding a coenzyme A-acylating aldehyde dehydrogenase, distinguishes Clostridium beijerinckii and two other solvent-producing clostridia from Clostridium acetobutylicum.

The coenzyme A (CoA)-acylating aldehyde dehydrogenase (ALDH) catalyzes a key reaction in the acetone- and butanol (solvent)-producing clostridia. It reduces acetyl-CoA and butyryl-CoA to the corresponding aldehydes, which are then reduced by alcohol dehydrogenase (ADH) to form ethanol and 1-butanol. The ALDH of Clostridium beijerinckii NRRL B593 was purified. It had no ADH activity, was NAD(H) specific, and was more active with butyraldehyde than with acetaldehyde. The N-terminal amino acid sequence of the purified ALDH was determined. The open reading frame preceding the ctfA gene (encoding a subunit of the solvent-forming CoA transferase) of C. beijerinckii NRRL B593 was identified as the structural gene (ald) for the ALDH. The ald gene encodes a polypeptide of 468 amino acid residues with a calculated M(r) of 51, 353. The position of the ald gene in C. beijerinckii NRRL B593 corresponded to that of the aad/adhE gene (encoding an aldehyde-alcohol dehydrogenase) of Clostridium acetobutylicum ATCC 824 and DSM 792. In Southern analyses, a probe derived from the C. acetobutylicum aad/adhE gene did not hybridize to restriction fragments of the genomic DNAs of C. beijerinckii and two other species of solvent-producing clostridia. In contrast, a probe derived from the C. beijerinckii ald gene hybridized to restriction fragments of the genomic DNA of three solvent-producing species but not to those of C. acetobutylicum, indicating a key difference among the solvent-producing clostridia. The amino acid sequence of the ALDH of C. beijerinckii NRRL B593 was most similar (41% identity) to those of the eutE gene products (CoA-acylating ALDHs) of Salmonella typhimurium and Escherichia coli, whereas it was about 26% identical to the ALDH domain of the aldehyde-alcohol dehydrogenases of C. acetobutylicum, E. coli, Lactococcus lactis, and amitochondriate protozoa. The predicted secondary structure of the C. beijerinckii ALDH suggests the presence of an atypical Rossmann fold for NAD(+) binding. A comparison of the proposed catalytic pockets of the CoA-dependent and CoA-independent ALDHs identified 6 amino acids that may contribute to interaction with CoA.     

Isolation of mesophilic solvent-producing clostridia from Colombian sources: physiological characterization, solvent production and polysaccharide hydrolysis

One hundred and seventy-eight new butanol-acetone producing bacteria related to saccharolytic clostridia were isolated from agricultural sources in Colombia and their fermentation potential was evaluated. Thirteen isolates produced more total solvents from glucose than Clostridium acetobutylicum ATCC 824. The isolates with the highest single solvent production were IBUN 125C and IBUN 18A with 0.46 mol butanol and 0.96 mol ethanol formed from 1 mol glucose, yielding 25. 2 and 29.1 g l(-1) total solvents, respectively, which is close to the maximum values described to date. Most of the new isolates produced exoenzymes for the hydrolysis of starch, carboxymethyl cellulose, xylan, polygalacturonic acid, inulin and chitosan. Together with the high efficiency of solvent production, these hydrolytic isolates may be useful for the direct fermentation of biomass. According to their physiological profile, the most solvent-productive isolates could be classified as strains of C. acetobutylicum, Clostridium beijerinckii, and Clostridium NCP262.     

The ald Gene, Encoding a Coenzyme A-Acylating Aldehyde Dehydrogenase, Distinguishes Clostridium beijerinckii and Two Other Solvent-Producing Clostridia from Clostridium acetobutylicum

The coenzyme A (CoA)-acylating aldehyde dehydrogenase (ALDH) catalyzes a key reaction in the acetone- and butanol (solvent)-producing clostridia. It reduces acetyl-CoA and butyryl-CoA to the corresponding aldehydes, which are then reduced by alcohol dehydrogenase (ADH) to form ethanol and 1-butanol. The ALDH of Clostridium beijerinckii NRRL B593 was purified. It had no ADH activity, was NAD(H) specific, and was more active with butyraldehyde than with acetaldehyde. The N-terminal amino acid sequence of the purified ALDH was determined. The open reading frame preceding the ctfA gene (encoding a subunit of the solvent-forming CoA transferase) of C. beijerinckii NRRL B593 was identified as the structural gene (ald) for the ALDH. The ald gene encodes a polypeptide of 468 amino acid residues with a calculated M_r of 51,353. The position of the ald gene in C. beijerinckii NRRL B593 corresponded to that of the aad/adhE gene (encoding an aldehyde-alcohol dehydrogenase) of Clostridium acetobutylicum ATCC 824 and DSM 792. In Southern analyses, a probe derived from the C. acetobutylicum aad/adhE gene did not hybridize to restriction fragments of the genomic DNAs of C. beijerinckii and two other species of solvent-producing clostridia. In contrast, a probe derived from the C. beijerinckii ald gene hybridized to restriction fragments of the genomic DNA of three solvent-producing species but not to those of C. acetobutylicum, indicating a key difference among the solvent-producing clostridia. The amino acid sequence of the ALDH of C. beijerinckii NRRL B593 was most similar (41% identity) to those of the eutE gene products (CoA-acylating ALDHs) of Salmonella typhimurium and Escherichia coli, whereas it was about 26% identical to the ALDH domain of the aldehyde-alcohol dehydrogenases of C. acetobutylicum, E. coli, Lactococcus lactis, and amitochondriate protozoa. The predicted secondary structure of the C. beijerinckii ALDH suggests the presence of an atypical Rossmann fold for NAD⁺ binding. A comparison of the proposed catalytic pockets of the CoA-dependent and CoA-independent ALDHs identified 6 amino acids that may contribute to interaction with CoA.     

Phenotypic and genotypic differences between certain strains of Clostridium acetobutylicum

Abstract It has become evident that several of the strains of Clostridium acetobutylicum that have been employed in physiological studies of the acetone-butanol fermentation, are heterogeneous. Studies of the phenotypic and genotypic characteristics of several of these strains (involving inter alia both pyrolysis mass spectrometry and 16S rRNA sequence determinations) demonstrated that the type strain obtained from ATCC was not identical with that supplied by NCIMB, and that NCIMB 8052T is in fact Clostridium beijerinckii . We therefore suggest that the name Clostridium acetobutylicum should be restricted to those strains that are genetically closely related to ATCC 824T (which include strains DSM 792 and DSM 1731 but not strain P262).     

Metabolic engineering of Clostridium acetobutylicum ATCC 824 for isopropanol-butanol-ethanol fermentation

Clostridium acetobutylicum naturally produces acetone as well as butanol and ethanol. Since acetone cannot be used as a biofuel, its production needs to be minimized or suppressed by cell or bioreactor engineering. Thus, there have been attempts to disrupt or inactivate the acetone formation pathway. Here we present another approach, namely, converting acetone to isopropanol by metabolic engineering. Since isopropanol can be used as a fuel additive, the mixture of isopropanol, butanol, and ethanol (IBE) produced by engineered C. acetobutylicum can be directly used as a biofuel. IBE production is achieved by the expression of a primary/secondary alcohol dehydrogenase gene from Clostridium beijerinckii NRRL B-593 (i.e., adh(B-593)) in C. acetobutylicum ATCC 824. To increase the total alcohol titer, a synthetic acetone operon (act operon; adc-ctfA-ctfB) was constructed and expressed to increase the flux toward isopropanol formation. When this engineering strategy was applied to the PJC4BK strain lacking in the buk gene (encoding butyrate kinase), a significantly higher titer and yield of IBE could be achieved. The resulting PJC4BK(pIPA3-Cm2) strain produced 20.4 g/liter of total alcohol. Fermentation could be prolonged by in situ removal of solvents by gas stripping, and 35.6 g/liter of the IBE mixture could be produced in 45 h.     

Genetic systems development in the clostridia

Abstract: This review describes recent developments in the genetic manipulation of the solventogenic clostridia, Clostridium acetobutylicum and C. beijerinckii . It is to be noted that our laboratory stock of C. acetobutylicum ATCC 824, which was obtained from the American Type Culture Collection, has recently been re-identified as C. beijerinckii NCIMB 8052 based on DNA similarity studies using the S1 nuclease method (personal communication, Dr. Jiann-Shin Chen, Virginia Polytechnic Institute and State University). Reference to our laboratory 824 culture has been changed to C. beijerinckii NCIMB 8052 throughout this paper in order to be consistent with this finding. The focus of this review specifically involves the characterization of an M13-like genetic system for the clostridia based on the pCAK1 phagemid, as well as preliminary work on development of a plasmid-based vector based on the indigenous pDM11 plasmid recovered from C. acetobutylicum NCIB 6443. The construction of a C. beijerinckii strain with amplified endoglucanase activity was achieved by inserting the engB gene from C. cellulovorans into C. beijerinckii . The successful expression of a heterologous engB gene from C. cellulovorans in C. beijerinckii NCIMB 8052 has important industrial significance for the eventual utilization of cellulose by this acetone-butanol-ethanol fermentation microorganism.     

Transcriptional analysis of Clostridium beijerinckii NCIMB 8052 and the hyper-butanol-producing mutant BA101 during the shift from acidogenesis to solventogenesis

Clostridium beijerinckii is an anaerobic bacterium used for the fermentative production of acetone and butanol. The recent availability of genomic sequence information for C. beijerinckii NCIMB 8052 has allowed for an examination of gene expression during the shift from acidogenesis to solventogenesis over the time course of a batch fermentation using a ca. 500-gene set DNA microarray. The microarray was constructed using a collection of genes which are orthologs of members of gene families previously found to be important to the physiology of C. acetobutylicum ATCC 824. Similar to the onset of solventogenesis in C. acetobutylicum 824, the onset of solventogenesis in C. beijerinckii 8052 was concurrent with the initiation of sporulation. However, forespores and endospores developed more rapidly in C. beijerinckii 8052 than in C. acetobutylicum 824, consistent with the accelerated expression of the sigE- and sigG-regulated genes in C. beijerinckii 8052. The comparison of gene expression patterns and morphological changes in C. beijerinckii 8052 and the hyper-butanol-producing C. beijerinckii strain BA101 indicated that BA101 was less efficient in sporulation and phosphotransferase system-mediated sugar transport than 8052 but that it exhibited elevated expression of several primary metabolic genes and chemotaxis/motility genes.     

Purification and characterization of a primary-secondary alcohol dehydrogenase from two strains of Clostridium beijerinckii.

Two primary alcohols (1-butanol and ethanol) are major fermentation products of several clostridial species. In addition to these two alcohols, the secondary alcohol 2-propanol is produced to a concentration of about 100 mM by some strains of Clostridium beijerinckii. An alcohol dehydrogenase (ADH) has been purified to homogeneity from two strains (NRRL B593 and NESTE 255) of 2-propanol-producing C. beijerinckii. When exposed to air, the purified ADH was stable, whereas the partially purified ADH was inactivated. The ADHs from the two strains had similar structural and kinetic properties. Each had a native M(r) of between 90,000 and 100,000 and a subunit M(r) of between 38,000 and 40,000. The ADHs were NADP(H) dependent, but a low level of NAD(+)-linked activity was detected. They were equally active in reducing aldehydes and 2-ketones, but a much lower oxidizing activity was obtained with primary alcohols than with secondary alcohols. The kcat/Km value for the alcohol-forming reaction appears to be a function of the size of the larger alkyl substituent on the carbonyl group. ADH activities measured in the presence of both acetone and butyraldehyde did not exceed activities measured with either substrate present alone, indicating a common active site for both substrates. There was no similarity in the N-terminal amino acid sequence between that of the ADH and those of fungi and several other bacteria. However, the N-terminal sequence had 67% identity with those of two other anaerobes, Thermoanaerobium brockii and Methanobacterium palustre. Furthermore, conserved glycine and tryptophan residues are present in ADHs of these three anaerobic bacteria and ADHs of mammals and green plants.     

Expression of plasmid-encoded aad in Clostridium acetobutylicum M5 restores vigorous butanol production.

Mutant M5 of Clostridium acetobutylicum ATCC 824, which produces neither butanol nor acetone and is deficient in butyraldehyde dehydrogenase (BYDH), acetoacetate decarboxylase, and acetoacetyl-coenzyme A:acetate/butyrate:coenzyme A-transferase activities, was transformed with plasmid pCAAD, which carries the gene aad (R. V. Nair, G. N. Bennett, and E. T. Papoutsakis, J. Bacteriol, 176:871-885, 1994). In batch fermentation studies, aad expression restored butanol formation (84 mM) in mutant M5 without any acetone formation or any significant increase in ethanol production. The corresponding protein (AAD) appeared as a ca. 96-kDa band in a denaturing protein gel. Expression of AAD in M5 resulted in restoration of BYDH activity and small increases in the activities of acetaldehyde dehydrogenase, butanol dehydrogenase, and ethanol dehydrogenase. These findings suggest that BYDH activity in C. acetobutylicum ATCC 824 resides largely in AAD, and that AAD's primary role is in the formation of butanol rather than of ethanol.     

丁醇合成途径关键酶基因在大肠杆菌中的克隆和表达

【目的】克隆丙酮丁醇梭状芽胞杆菌(Clostridium acetobutylicum)ATCC824丁醇合成途径关键酶基因,构建产丁醇的工程大肠杆菌。【方法】以C.acetobutylicum ATCC824基因组为模板,分别扩增丁醇合成途径关键酶基因thil,adhE2和BCS operon(crt-bcd-etfB-etfA-hbd)基因序列,构建BCS operon-adhE2-thil/pTrc99a/MG1655(pBAT)。重组菌E.coli pBAT采用0.1 mmol异丙基-β-硫代半乳糖苷(IPTG)诱导5 h,测定乙酰基转移酶(THL)、3-羟基丁酰辅酶A脱氢酶(HBD)、3-羟基丁酰辅酶A脱水酶(CRT)、丁酰辅酶A脱氢酶(BCD)、醛醇脱氢酶(BYDH/BDH)的酶活。并以该基因工程菌作为发酵菌种,采用好氧、厌氧和微好氧三种培养方式,检测丁醇产量。【结果】酶活测定结果显示:THL酶活达到0.160 U/mg protein,酶活力提高了近30倍;HBD酶活力提高了近5倍;CRT酶活达到1.53 U/mg protein,野生菌株无此酶活;BCD酶活力提高了32倍;BYDH/BDH酶活力无显著提高。3种发酵培养结果显示在微好氧和厌氧条件下,均有丁醇产生,且丁醇的最大产量约为84 mg/L。【结论】本实验通过构建产丁醇基因工程大肠杆菌,实现了丁醇关键酶基因在大肠杆菌中的活性表达以及发酵产丁醇,为发酵法生产丁醇开辟了一条新的途径。     

Coenzyme A-acylating aldehyde dehydrogenase from Clostridium beijerinckii NRRL B592

Acetaldehyde and butyraldehyde are substrates for alcohol dehydrogenase in the production of ethanol and 1-butanol by solvent-producing clostridia. A coenzyme A (CoA)-acylating aldehyde dehydrogenase (ALDH), which also converts acyl-CoA to aldehyde and CoA, has been purified under anaerobic conditions from Clostridium beijerinckii NRRL B592. The ALDH showed a native molecular weight (Mr) of 100,000 and a subunit Mr of 55,000, suggesting that ALDH is dimeric. Purified ALDH contained no alcohol dehydrogenase activity. Activities measured with acetaldehyde and butyraldehyde as alternative substrates were copurified, indicating that the same ALDH can catalyze the formation of both aldehydes for ethanol and butanol production. Based on the Km and Vmax values for acetyl-CoA and butyryl-CoA, ALDH was more effective for the production of butyraldehyde than for acetaldehyde. ALDH could use either NAD(H) or NADP(H) as the coenzyme, but the Km for NAD(H) was much lower than that for NADP(H). Kinetic data suggest a ping-pong mechanism for the reaction. ALDH was more stable in Tris buffer than in phosphate buffer. The apparent optimum pH was between 6.5 and 7 for the forward reaction (the physiological direction; aldehyde forming), and it was 9.5 or higher for the reverse reaction (acyl-CoA forming). The ratio of NAD(H)/NADP(H)-linked activities increased with decreasing pH. ALDH was O2 sensitive, but it could be protected against O2 inactivation by dithiothreitol. The O2-inactivated enzyme could be reactivated by incubating the enzyme with CoA in the presence or absence of dithiothreitol prior to assay.     

Coenzyme A-acylating aldehyde dehydrogenase from Clostridium beijerinckii NRRL B592.

Acetaldehyde and butyraldehyde are substrates for alcohol dehydrogenase in the production of ethanol and 1-butanol by solvent-producing clostridia. A coenzyme A (CoA)-acylating aldehyde dehydrogenase (ALDH), which also converts acyl-CoA to aldehyde and CoA, has been purified under anaerobic conditions from Clostridium beijerinckii NRRL B592. The ALDH showed a native molecular weight (Mr) of 100,000 and a subunit Mr of 55,000, suggesting that ALDH is dimeric. Purified ALDH contained no alcohol dehydrogenase activity. Activities measured with acetaldehyde and butyraldehyde as alternative substrates were copurified, indicating that the same ALDH can catalyze the formation of both aldehydes for ethanol and butanol production. Based on the Km and Vmax values for acetyl-CoA and butyryl-CoA, ALDH was more effective for the production of butyraldehyde than for acetaldehyde. ALDH could use either NAD(H) or NADP(H) as the coenzyme, but the Km for NAD(H) was much lower than that for NADP(H). Kinetic data suggest a ping-pong mechanism for the reaction. ALDH was more stable in Tris buffer than in phosphate buffer. The apparent optimum pH was between 6.5 and 7 for the forward reaction (the physiological direction; aldehyde forming), and it was 9.5 or higher for the reverse reaction (acyl-CoA forming). The ratio of NAD(H)/NADP(H)-linked activities increased with decreasing pH. ALDH was O2 sensitive, but it could be protected against O2 inactivation by dithiothreitol. The O2-inactivated enzyme could be reactivated by incubating the enzyme with CoA in the presence or absence of dithiothreitol prior to assay.     

Engineered Synthetic Pathway for Isopropanol Production in Escherichia coli

A synthetic pathway was engineered in Escherichia coli to produce isopropanol by expressing various combinations of genes from Clostridium acetobutylicum ATCC 824, E. coli K-12 MG1655, Clostridium beijerinckii NRRL B593, and Thermoanaerobacter brockii HTD4. The strain with the combination of C. acetobutylicum thl (acetyl-coenzyme A [CoA] acetyltransferase), E. coli atoAD (acetoacetyl-CoA transferase), C. acetobutylicum adc (acetoacetate decarboxylase), and C. beijerinckii adh (secondary alcohol dehydrogenase) achieved the highest titer. This strain produced 81.6 mM isopropanol in shake flasks with a yield of 43.5% (mol/mol) in the production phase. To our knowledge, this work is the first to produce isopropanol in E. coli, and the titer exceeded that from the native producers.     

Stability of solvent production by Clostridium acetobutylicum in continuous culture: strain differences

W oolley , R.C. & M orris , J.G. 1990. Stability of solvent production by Clostridium acetobutylicum in continuous culture: strain differences. Journal of Applied Bacteriology 69 , 718–728.
Several strains of Clostridium acetobutylicum , including strains ATCC 824 and DSM 1731, continue to produce solvents during prolonged periods of chemostat culture. In such cultures, dominance is established by asporogenous mutant(s) that retain the ability to produce solvents. Strain NCIB 8052 (which is not identical with ATCC 824) behaved differently in that its chemostat cultures invariably became acidogenic due to ultimate selection of asporogenous mutant(s) unable to produce solvents, incapable of synthesizing granulose, and demonstrating enhanced sensitivity to environmental stresses of various types. These mutants spontaneously reverted, at a low but measurable frequency, to the parental phenotype, indicating thai their multiple loss of capacities was the pleiotropic consequence of a lesion in some global regulatory gene. Their resemblance to previously described cls mutants of strain P262 and the possible nature of the affected regulatory gene are discussed. A simple tetrazolium blue plate assay procedure is described which allows visual discrimination between solvent-producing and non-solventogenic colonies of Cl. ocetobutylicum .     

Metabolic engineering of Clostridium acetobutylicum ATCC 824 for increased solvent production by enhancement of acetone formation enzyme activities using a synthetic acetone operon

The ability to genetically alter the product-formation capabilities of Clostridium acetobutylicum is necessary for continued progress toward industrial production of the solvents butanol and acetone by fermentation. Batch fermentations at pH 4.5, 5.5, or 6.5 were conducted using C. acetobutylicum ATCC 824 (pFNK6). Plasmid pFNK6 contains a synthetic operon (the "ace operon") in which the three homologous acetone-formation genas (adc, ctfA, and ctfB) are transcribed from the adc promoter. The corresponding enzymes (acetoacetate decarboxylase and CoA-transferase) were best expressed in pH 4.5 fermentations. However, the highest levels of solvents were attained at pH 5.5. Relative to the plasmid-free control strain at pH 5.5, ATCC 824 (pFNK6) produced 95%, 37%, and 90% higher final concentrations of acetone, butanol, and ethanol, respectively; a 50% higher yield (g/g) of solvents on glucose; and a 22-fold lower mass of residual carboxylic acids. At all pH values, the acetone-formation enzymes were expressed earlier with ATCC 824 (pFNK6) than in control fermentations, leading to earlier induction of acetone formation. Furthermore, strain ATCC 824 (pFNK6) produced butanol significantly earlier in the fermentation and produced significant levels of solvents at pH 6.5. Only trace levels of solvents were produced by strain ATCC 824 at pH 6.5. Compared with ATCC 824, a plasmid-control strain containing a vector without the ace operon also produced higher levels of solvents [although lower than those of strain ATCC 824 (pFNK6)] and lower levels of acids. Strains containing plasmid-borne derivatives of the ace operon, in which either the acetoacetate decarboxylase or CoA-transferase alone were expressed at elevated levels, produced acids and solvents at levels similar to those of the plasmid-control strain. (c) 1993 John Wiley & Sons, Inc.     

Molecular genetics and the initiation of solventogenesis in Clostridium beijerinckii (formerly Clostridium acetobutylicum) NCIMB 8052

Abstract: A physical map of the Clostridium beijerinckii (formerly Clostridium acetobutylicum ) NCIMB 8052 chromosome has been constructed, encompassing about 90 rare restriction sites. The 14 rrn operons together with 40 genes have been assigned positions on the map. Genetic analysis and gene transfer have been developed in this organism to enable in vivo analysis of the roles of cloned genes using marker replacement technology. Experiments using the available genetic tools have shown that spo0A plays a cardinal role in controlling several aspects of the transition from exponential growth to stationary phase in C. beijerinckii . These include initiation of sporulation, accumulation of the storage polysaccharide, granulose, and production of acetone and butanol. Several C. beijerinckii and C. acetobutylicum genes concerned with fermentative metabolism, whose expression is modulated at the onset of solventogenesis, contain sequence motifs resembling 0A boxes in their 5' regulatory regions. This invites the speculation that they are under direct control of Spo0A, and additional data are now required to test this prediction.     

Metabolic engineering of Clostridium tyrobutyricum for n-butanol production

Clostridium tyrobutyricum ATCC 25755, a butyric acid producing bacterium, has been engineered to overexpress aldehyde/alcohol dehydrogenase 2 (adhE2, Genebank no. AF321779) from Clostridium acetobutylicum ATCC 824, which converts butyryl-CoA to butanol, under the control of native thiolase (thl) promoter. Butanol titer of 1.1g/L was obtained in C. tyrobutyricum overexpressing adhE2. The effects of inactivating acetate kinase (ack) and phosphotransbutyrylase (ptb) genes in the host on butanol production were then studied. A high C4/C2 product ratio of 10.6 (mol/mol) was obtained in ack knockout mutant, whereas a low C4/C2 product ratio of 1.4 (mol/mol) was obtained in ptb knockout mutant, confirming that ack and ptb genes play important roles in controlling metabolic flux distribution in C. tyrobutyricum. The highest butanol titer of 10.0g/L and butanol yield of 27.0% (w/w, 66% of theoretical yield) were achieved from glucose in the ack knockout mutant overexpressing adhE2. When a more reduced substrate mannitol was used, the butanol titer reached 16.0 g/L with 30.6% (w/w) yield (75% theoretical yield). Moreover, C. tyrobutyricum showed good butanol tolerance, with >80% and ～60% relative growth rate at 1.0% and 1.5% (v/v) butanol. These results suggest that C. tyrobutyricum is a promising heterologous host for n-butanol production from renewable biomass.     

Introducing a single secondary alcohol dehydrogenase into butanol-tolerant Clostridium acetobutylicum Rh8 switches ABE fermentation to high level IBE fermentation

ABSTRACT: BACKGROUND: Previously we have developed a butanol tolerant mutant of Clostridium acetobutylicum, Rh8, from the wild type strain DSM 1731. Strain Rh8 can tolerate up to 19 g/L butanol, with solvent titer improved accordingly, thus exhibiting industrial application potential. To test if strain Rh8 can be used for production of high level mixed alcohols, a single secondary alcohol dehydrogenase from Clostridium beijerinckii NRRL B593 was overexpressed in strain Rh8 under the control of constitutive thl promoter. RESULTS: The heterogenous gene sADH was functionally expressed in C. acetobutylicum Rh8. This simple, one-step engineering approach led to the complete conversion of acetone into isopropanol, achieving a total alcohol titer of 23.88 g/l (7.6 g/l isopropanol, 15 g/l butanol, and 1.28 g/l ethanol) with a yield to glucose of 31.42%. The acid (butyrate and acetate) assimilation rate in isopropanol producing strain Rh8(psADH) was increased. CONCLUSIONS: The improved butanol tolerance and the enhanced solvent biosynthesis machinery in strain Rh8 is beneficial for production of high concentration of mixed alcohols. Strain Rh8 thus can be considered as a good host for further engineering of solvent/alcohol production.     

可发酵糖为底物不同菌种丁醇生产能力的研究

随着新一代生物质能源的研发,利用梭菌的发酵生产丁醇已成为热点。选用能生产丁醇的Clostridium acetobutylicum AS1.7,Clostridium acetobutylicum AS1.132,Clostridium acetobutylicumAS1.134和Clostridium beijerinckii NCMIB 8052,在多种糖源下进行发酵培养,通过比较其在不同糖源条件下的生长情况、糖利用率、丁醇及副产物产量、对丁醇、木糖耐受能力等,综合筛选出了最适用于发酵生产丁醇的备选菌种。NCMIB8052因具有最高产量、相对优良的耐受性及可利用多种糖源的特点,而被确定为发酵能力最强的菌种。