A freeze-fracture and concanavalin A-binding study of the membrane of cleaving Xenopus embryos.

The freeze-fracture appearance and concanavalin A-binding capacity of the plasma membrane of cells of the cleaving Xenopus embryo have been examined up to the 16-cell stage. It was found that membrane on the outer surface of the embryo, which faces the vitelline membrane and is remote from cleavage furrows, and membrane in the shallow regions of the furrow possessed a high population of intramembranous particles on the PF-face (1171 per mum2). The EF-face of these membranes showed a lower particle population (245 per mum2). By contrast, membrane deep in the furrow and bounding the blastocoel did not display a face with high particle numbers. Both faces of this membrane, which is newly exposed as the furrow grows, were relatively poorly supplied with particles (93 per mum2). Therefore it appears that, in this tissue, newly added membrane possesses fewer intramembranous particles than the pre-existing membrane. Concanavalin A, as detected cytochemically using peroxidase and haemocyanin techniques, bound extensively to both particle-rich and particle-poor membrane. Thus there was no correlation between intramembranous particle frequency and degree of concanavalin A binding.     

Binding of nanoparticle receptors to peptide alpha-helices using amino acid-functionalized nanoparticles.

Nanoparticles provide large surface areas and controlled surface functionality and structure, making them excellent scaffolds for peptide recognition. A family of nanoparticles has been fabricated by amino acid functionalization to afford tailored surfaces. These particles are complementary to a tetraaspartate peptide (TAP) featuring cofacial anionic functionality when in the alpha-helical conformation. The functional groups present on these nanoparticle surfaces provide a tool to investigate the contribution of various noncovalent interactions at the nanoparticle-peptide interface. The ability of these particles to enforce the folding of the peptide into an alpha-helix was explored, demonstrating high helicity induction with particles featuring dicationic amino acids such as lysine or histidine, and little or no helix stabilization with hydrophobic amino acid termini.     

Ultrastructure of the sodium pump: Comparison of thin sectioning, negative staining, and freeze-fracture of purified, membrane-bound (Na+, K+)-ATPase

Purified (Na+, K+)-ATPase was studied by electron microscopy after thin sectioning, negative staining, and freeze-fracturing, particular emphasis being paid to the dimensions and frequencies of substructures in the membranes. Ultrathin sections show exclusively flat or cup-shaped membrane fragments which are triple-layered along much of their length and have diameters of 0.1-0.6 μm. Negative staining revealed a distinct substructure of particles with diameters between 30 and 50 A and with a frequency of 12,500 +/- 2,400 (SD) per μm(2). Comparisons with sizes of the protein components suggest that each surface particle contains as its major component one large catalytic chain with mol wt close to 100,000 and that two surface particles unite to form the unit of (Na+,K+)-ATPase which binds one molecule of ATP or ouabain. The further observations that the surface particles protrude from the membrane surface and are observed on both membrane surfaces in different patterns and degrees of clustering suggest that protein units span the membrane and are capable of lateral mobility. Freeze-fracturing shows intramembranous particles with diameters of 90-110 A and distributed on both concave and convex fracture faces with a frequency of 3,410 +/- 370 per μm(2) and 390 +/- 170 per μm(2), respectively. The larger diameters and three to fourfold smaller frequency of the intramembranous particles as compared to the surface particles seen after negative staining may reflect technical differences between methods, but it is more likely that the intramembranous particle is an oliogomer composed of two or even more of the protein units which form the surface particles.     

A Freeze-Fracture and Concanavalin A-Binding Study of the Membrane of Cleaving Xenopus Embryos

The freeze-fracture appearance and concanavalin A-binding capacity of the plasma membrane of cells of the cleaving Xenopus embryo have been examined up to the 16-cell stage. It was found that membrane on the outer surface of the embryo, which faces the vitelline membrane and is remote from cleavage furrows, and membrane in the shallow regions of the furrow possessed a high population of intramembranous particles on the PF-face (1171 per μm²). The EF-face of these membranes showed a lower particle population (245 per μm²). By contrast, membrane deep in the furrow and bounding the blastocoel did not display a face with high particle numbers. Both faces of this membrane, which is newly exposed as the furrow grows, were relatively poorly supplied with particles (93 per μm²). Therefore it appears that, in this tissue, newly added membrane possesses fewer intramembranous particles than the pre-existing membrane. Concanavalin A, as detected cytochemically using peroxidase and haemocyanin techniques, bound extensively to both particle-rich and particle-poor membrane. Thus there was no correlation between intramembranous particle frequency and degree of concanavalin A binding.     

Multiway data analysis approach toward understanding of photoluminescence and energy transfer in carbon nanodots

In this study, dilution analysis and anion exchange chromatography (AEC) were employed to provide insights into the photoluminescence (PL) of carbon nanodots (CNDs). A stepwise dilution process revealed that some of the fluorophores with higher energy emission were quenched in the high concentration solution and appeared in the dilute solutions. AEC fractionation led to seven sorts of CND fractions with similar surface charges. The fractionation for this CND mixture showed that excitation wavelength dependence was lower for separated CND particles. The wavelength dependence of excitation spectra could be due to energy exchange between particles that was reduced in diluted solutions and separated fractions. Multivariate analysis of AEC's data demonstrated that there were five distinct fluorophores, which formed the total CND emission. It is interesting that none of these fluorophores had a clear contribution to the surface charge of the CND particles. Further characterization through FTIR spectroscopy and ¹H NMR revealed that optical properties of CNDs did not follow the surface functional groups in CNDs. This situation means that the optical behaviour of particles and their fluorophores differed depending on the surface functional groups.     

Labelling of colloidal gold with protein A. A quantitative study

Colloidal gold complexes with protein A are extensively used in immunocytochemistry as secondary reagents for the localization of antigens. However detailed information on the process and extent of adsorption of protein A onto gold particles, the optimal condition of preparation and the stability of such complexes are lacking. The adsorption isotherm of 125I-protein A onto gold particles (11.2 nm in diameter) was studied quantitatively with gold sols buffered at pH 4-7. At low coverage of the particles, the isotherm was independent of pH. However in the presence of a large excess of protein A, the highest coverage was obtained with a gold sol buffered at pH 5.1, the isoelectric point of the protein. The association constant was decreased at high coverage of the particles. Maximum binding of the complex to immobilized IgG occurred with particles labelled with at least 9 molecules of protein A. The complex was stable under storage with up to 12 molecules adsorbed per particle. At high coverage (26 molecules per particle), a progressive loss of protein A was observed. The optimum condition for preparing the complex are reported.     

Chitosan-silica complex membranes from sulfonic acid functionalized silica nanoparticles for pervaporation dehydration of ethanol-water solutions

Nanosized silica particles with sulfonic acid groups (ST-GPE-S) were utilized as a cross-linker for chitosan to form a chitosan-silica complex membranes, which were applied to pervaporation dehydration of ethanol-water solutions. ST-GPE-S was obtained from reacting nanoscale silica particles with glycidyl phenyl ether, and subsequent sulfonation onto the attached phenyl groups. The chemical structure of the functionalized silica was characterized with FTIR, (1)H NMR, and energy-dispersive X-ray. Homogeneous dispersion of the silica particles in chitosan was observed with electronic microscopies, and the membranes obtained were considered as nanocomposites. The silica nanoparticles in the membranes served as spacers for polymer chains to provide extra space for water permeation, so as to bring high permeation rates to the complex membranes. With addition of 5 parts per hundred of functionalized silica into chitosan, the resulting membrane exhibited a separation factor of 919 and permeation flux of 410 g/(m(2) h) in pervaporation dehydration of 90 wt % ethanol aqueous solution at 70 degrees C.     

Labeling of adenovirus particles with PARACEST agents

Recombinant adenovirus type 5 particles (AdCMVLuc) were labeled with two different bifunctional ligands capable of forming stable complexes with paramagnetic lanthanide ions. The number of covalently attached ligands varied between 630 and 1960 per adenovirus particle depending upon the chemical reactivity of the bifunctional ligand (NHS ester versus isothiocyanide), the amount of excess ligand added, and the reaction time. The bioactivity of each labeled adenovirus derivative, as measured by the ability of the virus to infect cells and express luciferase, was shown to be highly dependent upon the number of covalently attached ligands. This indicates that certain amino groups, likely on the surface of the adenovirus fiber protein where cell binding is known to occur, are critical for viral attachment and infection. Addition of (177)Lu3+ to chemically modified versus control viruses demonstrated a significant amount of nonspecific binding of (177)Lu3+ to the virus particles that could not be sequestered by addition of excess DTPA. Thus, it became necessary to implement a prelabeling strategy for conjugation of preformed lanthanide ligand chelates to adenovirus particles. Using preformed Tm3+- L2, a large number of chelates having chemical exchange saturation transfer (CEST) properties were attached to the surface residues of AdCMVLuc without nonspecific binding of metal ions elsewhere on the virus particle. The potential of such conjugates to act as PARACEST imaging agents was tested using an on-resonance WALTZ sequence for CEST activation. A 12% decrease in bulk water signal intensity was observed relative to controls. This demonstrates that viral particles labeled with PARACEST-type imaging agents can potentially serve as targeted agents for molecular imaging.     

Estimation of surface area in very low density human serum lipoproteins

The surface area of very low density lipoproteins (VLDL) from the serum of 15 healthy donors and the surface area of artificial lipid particles have been estimated. The artificial particles were prepared as a mixture of egg phosphatidylcholine and triolein. Two fluorescent probes - energy donor and acceptor - were placed on the surface, and Forster's nonradiative energy transfer was measured; the transfer efficiency is a function of surface area. The fluorescent probe K-68 (4-[5-(phenyloxazolyl-2)-1-pentadecyl)pyridinium) was used as a donor, and DSP-12 (dimethylamino)styryl-N-dodecylpyridinium) was used as an acceptor. The specific surface area of the artificial lipid particles was estimated to be 0.585 +/- 0.015 nm2 per phosphatidylcholine molecule, which is 15% less than in lipid bilayers. The specific area of VLDL particles was 259 +/- 65 m2 per g of total VLDL. This value is close to the specific area of low density lipoproteins (LDL), and corresponds to the area of a spherical particle 10-12 nm in radius. However, VLDL are assumed to be much larger particles as compared with LDL. Therefore, the new data of the VLDL surface area raise a problem of revision of the existing VLDL models.     

Affinity chromatography of DNA on nonporous copolymerized particles of styrene and glycidyl methacrylate with immobilized polynucleotide

Nonporous particles of microsize were prepared by the dispersion polymerization of styrene and glycidyl methacrylate and chemically modified to introduce amino groups on the surface by grafting with either hexamethylenediamine or N-methyl-1,3-propanediamine. Aminated particles were then coupled with phosphorylated single-stranded polynucleotides at the 5'-end through covalent linkages. The affinity columns packed with these prepared polynucleotide-immobilized particles effectively retained single-stranded DNA, which could base-pair with the immobilized sequence. Bound DNAs could be eluted to yield a sharp peak by using an aqueous solution of 0.4M NaOH. The nonspecific adsorption due to the electrostatic interaction between the polynucleotide and the residual amino groups on the particle surface via the amination with hexamethylenediamine was significant and could only be reduced by using a high salt (NaCl) concentration. A higher salt concentration in the elution solution could result in a portion of complementary polynucleotide eluted in the nonretained fraction. However, the nonspecific adsorption of polynucleotides was insignificant in the column packed with DNA-immobilized particles prepared via amination using N-methyl-1,3-propanediamine. The column was effective for microanalysis of sequence-specific DNA.     

Oxidation of cholesterol in low density and high density lipoproteins by cholesterol oxidase

The cholesterol oxidase-catalyzed oxidation of cholesterol in native low density (LDL) and high density lipoproteins (HDL3) as well as in monolayers prepared from surface lipids of these particles, has been examined. The objective of the study was to compare the oxidizability of cholesterol, and to examine the effects of lipid packing on oxidation rates. When [3H]cholesterol-labeled lipoproteins were exposed to cholesterol oxidase (Streptomyces sp.), it was observed that LDL [3H]cholesterol was oxidized much faster than HDL3 [3H]cholesterol. This was true both at equal cholesterol concentration per enzyme unit, and at equal amounts of lipoprotein particles per enzyme unit. About 95% of lipoprotein [3H]cholesterol was available for oxidation. The complete degradation of lipoprotein sphingomyelin by sphingomyelinase (Staphylococcus aureus) resulted in a 10-fold increase in the rate of LDL [3H]cholesterol oxidation, whereas the effects on rates of HDL3 [3H]cholesterol oxidation were less dramatic. A monolayer study with LDL surface lipids indicated that degradation of sphingomyelin loosened the lipid packing, because the ceramide formed occupied a smaller surface area than the parent sphingomyelin, and since the condensing effect of cholesterol on sphingomyelin packing was lost. The effects of sphingomyelin degradation on lipid packing in monolayers of HDL3-derived surface lipids were difficult to determine from monolayer experiments. Based on the finding that cholesterol oxidases are surface pressure-sensitive with regard to their catalytic activity, these were used to estimate the surface pressure of intact LDL and HDL3. The cut-off surface pressure of a Brevibacterium enzyme was 25 mN/m and 20 mN/m in monolayers of LDL and HDL3-derived surface lipids, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)     

Biosorption of heavy metals from aqueous solutions with tobacco dust

A typical lignocellulosic agricultural residue, namely tobacco dust, was investigated for its heavy metal binding efficiency. The tobacco dust exhibited a strong capacity for heavy metals, such as Pb(II), Cu(II), Cd(II), Zn(II) and Ni(II), with respective equilibrium loadings of 39.6, 36.0, 29.6, 25.1 and 24.5 mg of metal per g of sorbent. Moreover, the heavy metals loaded onto the biosorbent could be released easily with a dilute HCl solution. Zeta potential and surface acidity measurements showed that the tobacco dust was negatively charged over a wide pH range (pH > 2), with a strong surface acidity and a high OH⁻ adsorption capacity. Changes in the surface morphology of the tobacco dust as visualized by atomic force microscopy suggested that the sorption of heavy metal ions on the tobacco could be associated with changes in the surface properties of the dust particles. These surface changes appeared to have resulted from a loss of some of the structures on the surface of the particles, owing to leaching in the acid metal ion solution. However, Fourier transform infrared spectroscopy (FTIR) showed no substantial change in the chemical structure of the tobacco dust subjected to biosorption. The heavy metal uptake by the tobacco dust may be interpreted as metal–H ion exchange or metal ion surface complexation adsorption or both.     

Fine structure of the chloroplast membranes ofEuglena gracilis as revealed by freeze-cleaving and deep-etching techniques

Summary The chloroplasts ofEuglena gracilis have been examined by freeze-cleaving and deep-etching techniques.The two chloroplast envelope membranes exhibit distinct fracture faces which do not resemble any of the thylakoid fracture faces.Freeze-cleaved thylakoid membranes reveal four split inner faces. Two of these faces correspond to stacked membrane regions, and two to unstacked regions. Analysis of particle sizes on the exposed faces has revealed certain differences from other chloroplast systems, which are discussed. Thylakoid membranes inEuglena are shown to reveal a constant number of particles per unit area (based on the total particle number for both complementary faces) whether they are stacked or unstacked.Deep-etchedEuglena thylakoid membranes show two additional faces, which correspond to true inner and outer thylakoid surfaces. Both of these surfaces carry very uniform populations of particles. Those on the external surface (the A surface) are round and possess a diameter of approximately 9.5 nm. Those on the inner surface (the D surface) appear rectangular (as paired subunits) and measure approximately 10 nm in width and 18 nm in length. Distribution counts of particles show that the number of particles per unit area revealed by freeze-cleaving within the thylakoid membrane approximates closely the number of particles exposed on the external thylakoid surface (the A surface) by deep-etching. The possible significance of this correlation is discussed. The distribution of rectangular particles on the inner surface of the thylakoid sac (D surface) seems to be the same in both stacked and unstacked membrane regions. We have found no correlation between the D surface particles and any clearly defined population of particles on internal, freeze-cleaved membrane faces. These and other observations suggest that stacked and unstacked membranes are similar, if not identical in internal structure.     

Changes in cell surface anionogenic groups induced by propranolol in Herpetomonas muscarum muscarum

The effects of propranolol (10(-3) mM) on the surface anionic groups of Herpetomonas muscarum muscarum were analysed by cell electrophoresis, by ultrastructural cytochemistry and by identification of sialic acids using paper chromatography. Differentiation of H. muscarum muscarum induced by propranolol treatment caused a significant increase in the net negative surface charge. Binding of cationized ferritin (CF) and colloidal iron hydroxide particles was observed at the cell surface of both untreated and propranolol-treated cells. In cells incubated in the presence of the drug the CF particles were distributed in all membrane regions. However, there were small areas where the particles were absent. In H. muscarum muscarum exposed to propranolol the density of residues of sialic acid per cell was higher, and the agglutinating activity with Sendai virus was more intense. However, the pattern of sialic acid, characterized by the presence of N-acetylneuraminic acid derivative, was not modified upon cell interaction with the drug. Treatment of both control and propranolol-treated protozoa with neuraminidase significantly reduced the surface charge. These findings suggest that sialic acid residues are the major anionogenic groups exposed on the surface of H. muscarum muscarum.     

Flow chamber analysis of size effects in the adhesion of spherical particles

The non-specific adhesion of spherical micro- and nano-particles to a cell substrate is investigated in a parallel plate flow chamber. Differently from prior in-vitro analyses, the total volume of the particles injected into the flow chamber is kept fixed whilst the particle diameter is changed in the range 0.5-10 microm. It is shown that: (i) the absolute number of particles adherent to the cell layer per unit surface decreases with the size of the particle as d(-1.7); (ii) the volume of the particles adherent per unit surface increases with the size of the particles as d(+1.3). From these results and considering solely non-specific particles, the following hypothesis are generated (i) use the smallest possible particles in biomedical imaging and (ii) use the largest possible particles in drug delivery.     

Short peptide receptor mimics for atherosclerosis risk assessment of LDL

Short peptides sequences were selected that showed binding selectivity towards healthy or oxidised (unhealthy) low density lipoprotein (LDL), respectively. These were investigated for application in atherosclerosis risk monitoring. Comparison was also made with the LDL receptor ligand repeat peptide (LR5). The peptides were immobilised on a gold surface plasmon resonance surface and LDL binding detected as a shift in the resonance. 3.7x10(7) (+/-5.6x10(6)) LDL/mm(2)/microg/ml solution LDL were bound on GlySerAspGlu-OH and 6.8x10(7) (+/-9.2x10(6)) LDL/mm(2)/microg/ml on GlyCystineSerAspGlu, compared with approximately 10(8) LDL/mm(2)/microg/ml on LR5. In this first group, binding of LDL decreased with oxidation level and a good correlation was found between LDL binding and residual amino groups on the apoprotein of the LDL following oxidation, or the change in relative electrophoretic mobility (REM) of LDL. The decrease in binding was 1.1x10(7) LDL particles/mm(2) per% oxidation for GlySerAspGlu-OH, 1.8x10(7) LDL particles/mm(2) per% oxidation for GlyCystineSerAspGlu and 2.4x10(7) LDL particles/mm(2) per% oxidation for LR5. A second group of three peptides were also selected showing increased binding with LDL oxidation: GlyCystineCysCys (1.5x10(7) LDL/mm(2) per microg/ml), GlyLysLysCys-SH (10(7) LDL/mm(2) per microg/ml) and GlyLysLys-OH (5.6x10(7) LDL/mm(2) per microg/ml). The latter gave a linear increase in LDL binding with oxidation level (1.2x10(7) LDL particles/mm(2) per% oxidation). LDL concentration is around 2-3 mg/ml in plasma compared with the low detection levels with this method (1-10 microg/ml), allowing a strategy to be developed requiring the minimum sample volume and diluting with physiological buffer prior to assay. By using a comparative reading between LDL adsorption on surfaces from the first and second group of peptides (e.g. GlyCystineSerAspGlu and GlyLysLys-OH, respectively), LDL oxidation could be determined without knowledge of LDL concentration. Higher binding was seen on GlyCystineSerAspGlu than GlyLysLys-OH below 30% LDL oxidation, whereas above 30% oxidation the binding on the latter surface was greater. Simple correlation of this form could provide good tests for atherosclerosis risk.     

Detection of functional groups and antibodies on microfabricated surfaces by confocal microscopy

Fluorescence confocal microscopy was used to characterize micron-sized microfabricated silicon particles and planar oxide surfaces after silanization and immobilization of IgG antibody. Surfaces treated with amino- and mercaptosilanes were tested for the presence of amine and sulfhydryl groups by labeling with specific fluorescein probes. In addition, human antibody (IgG) was immobilized to the thiol-coated microparticles using the heterobifunctional crosslinker succinimidyl 4-(N-maleimidolmethyl)-cyclohexane-1-carboxylate. Estimates of the surface density of IgG were consistent with 8.3% of a monolayer of covalently-bound antibody. Confocal images confirmed uniform layers of both silanes and antibodies on the microparticles. The sensitivity limit for the confocal measurements was determined to be as low as 1.5 x 10(-5) fluors per nm2.     

Covalent immobilization of glucose oxidase on well-defined poly(glycidyl methacrylate)-Si(111) hybrids from surface-initiated atom-transfer radical polymerization

A simple one-step procedure was employed for the covalent immobilization of an atom-transfer radical polymerization (ATRP) initiator, via the robust Si-C bond, on the hydrogen-terminated Si(111) surface (Si-H surface). Well-defined poly(glycidyl methacrylate) [P(GMA)] brushes, tethered directly on the (111)-oriented single-crystal silicon surface, were prepared via surface-initiated ATRP. Kinetics study on the surface-initiated ATRP of glycidyl methacrylate revealed that the chain growth from the silicon surface was consistent with a "controlled" process. A relatively high concentration of glucose oxidase (GOD; above 0.2 mg/cm2) could be coupled directly to the well-defined P(GMA) brushes via the ring-opening reaction of the epoxide groups with the amine moieties of the enzyme. The resultant GOD-functionalized P(GMA) brushes, with the accompanying hydroxyl groups from the ring-opening reaction of the epoxide groups, serves as an effective spacer to provide the GOD with a higher degree of conformational freedom and a more hydrophilic environment. An equivalent enzyme activity above 1.6 units/cm2 [micromoles of beta-D-(+)-glucose oxidized to d-gluconolactone per minute per square centimeter] and a corresponding relative activity of about 60% could be readily achieved. The immobilized GOD also exhibited an improved stability during storage over that of the free enzyme. The GOD-functionalized silicon substrates are potentially useful to the development of silicon-based glucose biosensors.     

Surface thermodynamics of bacterial adhesion.

The adhesion of five strains of bacteria, i.e., Staphylococcus aureus (strain 049), Staphylococcus epidermidis (strain 047), Escherichia coli (strains 055 and 2627), and Listeria monocytogenes, to various polymeric surfaces was studied. The design of the experimental protocol was dictated by thermodynamic considerations. From the thermodynamic model for the adhesion of small particles from a suspension onto a solid substratum, it follows that the extent of adhesion is determined by the surface properties of all three phases involved, i.e., the surface tensions of the adhering particles, of the substrate, and of the suspending liquid medium. In essence, adhesion is more extensive to hydrophilic substrata (i.e., substrata of relatively high surface tension) than to hydrophobic substrata, when the surface tension of the bacteria is larger than that of the suspending medium. When the surface tension of the suspending liquid is larger than that of the bacteria, the opposite pattern of behavior prevails. Suspensions of bacteria at a concentration of 10(8) microorganisms per ml were brought into contact with several polymeric surfaces (Teflon, polyethylene, polystyrene, and acetal and sulfonated polystyrene) for 30 min at 20 degrees C. After rinsing, the number of bacteria adhering per unit surface area was determined by image analysis. The surface tension of the suspending medium. Hanks balanced salt solution, was modified through the addition of various amounts of dimethyl sulfoxide. It was found that the number of bacteria adhering per unit surface area correlates well with the thermodynamic predictions and that these data may be used to determine the surface tension of the different bacterial species. The surface tensions of the bacteria obtained in this fashion are in excellent agreement with those obtained by other methods.     

Changes in Cell Surface Anionogenic Groups Induced by Propranolol in Herpetomonas muscarum muscarum

The effects of propranolol (10⁻³ mM) on the surface anionic groups of Herpetomonas muscarum muscarum were analysed by cell electrophoresis, by ultrastructural cytochemistry and by identification of sialic acids using paper chromatography. Differentiation of H. muscarum muscarum induced by propranolol treatment caused a significant increase in the net negative surface charge. Binding of cationized ferritin (CF) and colloidal iron hydroxide particles was observed at the cell surface of both untreated and propranolol-treated cells. In cells incubated in the presence of the drug the CF particles were distributed in all membrane regions. However, there were small areas where the particles were absent. In H. muscarum muscarum exposed to propranolol the density of residues of sialic acid per cell was higher, and the agglutinating activity with Sendai virus was more intense. However, the pattern of sialic acid, characterized by the presence of N-acetylneuraminic acid derivative, was not modified upon cell interaction with the drug. Treatment of both control and propranolol-treated protozoa with neuraminidase significantly reduced the surface charge. These findings suggest that sialic acid residues are the major anionogenic groups exposed on the surface of H. muscarum muscarum .