基于天然水凝胶的生物材料在骨组织工程中的应用*

天然水凝胶是指原材料来自于天然生物材料的水凝胶。由于这种天然的聚合物含有构成生物体的天然成分,与天然组织具有生物学和化学相似性,而受到特别关注。天然水凝胶由于其与细胞外基质高度的相似性被认为是骨组织工程中优良的仿生基质材料。而针对天然水凝胶机械性能差、成骨诱导性能弱等缺陷,通常需要对天然水凝胶进行改性、引入其他材料或生物活性因子,以此来获得更适用于骨组织工程支架材料。对近年来基于天然水凝胶的生物材料在骨组织工程的应用,与其不同的应用形式(可注射水凝胶、多孔水凝胶支架、3D生物打印水凝胶支架等)进行了概述,以期对这类基于天然水凝胶的生物材料在未来骨组织工程中的应用提供参考。     

基于液滴微流控的细胞凝胶微球研究进展

液滴微流控技术在微纳米尺度上对多种流体的流动进行精确控制,从而能够以高通量的方式生成结构可调和成分可控的微纳米液滴。通过结合合适的水凝胶材料和制造方法,可以将单个或多个细胞高效地封装进水凝胶中,制备细胞凝胶微球。细胞凝胶微球可以为细胞的增殖、分化等提供一个三维的、相对独立可控的微环境,在三维细胞培养、组织工程与再生医学、干细胞研究和单细胞研究等生命科学领域具有重要价值。本文主要综述了基于液滴微流控技术的细胞凝胶微球的制备及其在生物医学领域的应用,并对未来的研究工作提出了展望。     

Advanced biomaterials and their potential applications in the treatment of periodontal disease

Periodontal disease is considered as a widespread infectious disease and the most common cause of tooth loss in adults. Attempts for developing periodontal disease treatment strategies, including drug delivery and regeneration approaches, provide a useful experimental model for the evaluation of future periodontal therapies. Recently, emerging advanced biomaterials including hydrogels, films, micro/nanofibers and particles, hold great potential to be utilized as cell/drug carriers for local drug delivery and biomimetic scaffolds for future regeneration therapies. In this review, first, we describe the pathogenesis of periodontal disease, including plaque formation, immune response and inflammatory reactions caused by bacteria. Second, periodontal therapy and an overview of current biomaterials in periodontal regenerative medicine have been discussed. Third, the roles of state-of-the-art biomaterials, including hydrogels, films, micro/nanofibers and micro/nanoparticles, developed for periodontal disease treatment and periodontal tissue regeneration, and their fabrication methods, have been presented. Finally, biological properties, including biocompatibility, biodegradability and immunogenicity of the biomaterials, together with their current applications strategies are given. Conclusive remarks and future perspectives for such advanced biomaterials are discussed.     

Biocompatibility of hydrogel-based scaffolds for tissue engineering applications

Recently, understanding of the extracellular matrix (ECM) has expanded rapidly due to the accessibility of cellular and molecular techniques and the growing potential and value for hydrogels in tissue engineering. The fabrication of hydrogel-based cellular scaffolds for the generation of bioengineered tissues has been based on knowledge of the composition and structure of ECM. Attempts at recreating ECM have used either naturally-derived ECM components or synthetic polymers with structural integrity derived from hydrogels. Due to their increasing use, their biocompatibility has been questioned since the use of these biomaterials needs to be effective and safe. It is not surprising then that the evaluation of biocompatibility of these types of biomaterials for regenerative and tissue engineering applications has been expanded from being primarily investigated in a laboratory setting to being applied in the multi-billion dollar medicinal industry. This review will aid in the improvement of design of non-invasive, smart hydrogels that can be utilized for tissue engineering and other biomedical applications. In this review, the biocompatibility of hydrogels and design criteria for fabricating effective scaffolds are examined. Examples of natural and synthetic hydrogels, their biocompatibility and use in tissue engineering are discussed. The merits and clinical complications of hydrogel scaffold use are also reviewed. The article concludes with a future outlook of the field of biocompatibility within the context of hydrogel-based scaffolds.     

Bioconjugation of hydrogels for tissue engineering

Success of tissue engineered constructs in regenerative medicine is limited by the lack of cellmatrix interactions to guide devleopment of the seeded cells into the desired tissue. This review highlights the most exciting developments in bioconjugation of synthetic hydrogels targeted to tissue engineering. Application of conjugation techniques has resulted in the synthesis of novel biomimetic cell-responsive hydrogels to control the cascade of cell migration, adhesion, survival, differentiation, and maturation to the desired lineage concurrent with matrix remodeling. The future outlook includes developing conjugated patterned hydrogel matrices, developing novel hydrogel matrices to support self-renewal and pluripotency of embryonic and adult stem cells, and merging 3D printing with bioconjugation to fabricate hydrogels with anatomical arrangement of cells and biomolecules.     

Investigating the limits of filopodial sensing: a brief report using SEM to image the interaction between 10 nm high nano-topography and fibroblast filopodia

Having the ability to control cell behaviour would be of great advantage in tissue engineering. One method of gaining control over cell adhesion, proliferation, guidance and differentiation is use of topography. Whilst it has be known for some time that cells can be guided by micro‐topography, it is only recently becoming clear that cells will respond strongly to nano‐scale topography. The fact that cells will take cues from their micro‐ and nano‐environment suggests that the cells are in some way ‘spatially aware’. It is likely that cells probe the shape of their surroundings using filopodia, and that this initial filopodia/topography interaction may be critical to down‐stream cell reactions to biomaterials, or indeed, the extracellular matrix. One intriguing question is how small a feature can cells sense? In order to investigate the limits of cell sensing, high‐resolution scanning electron microscopy has been used to simultaneously view cell filopodia and 10 nm high nano‐islands. Fluorescence microscopy has also been used to look at adhesion formation. The results showed distinct filopodial/nano‐island interaction and changes in adhesion morphology.     

A brief review of extrusion‐based tissue scaffold bio‐printing

Extrusion‐based bio‐printing has great potential as a technique for manipulating biomaterials and living cells to create three‐dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion‐based bio‐printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio‐printing and manipulation of multiple materials and cells in bio‐printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion‐based bio‐printing for scaffold fabrication, focusing on the prior‐printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to‐date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi‐materials/cells manipulation, and process‐induced cell damage in extrusion‐based bio‐printing. The key issue and challenges for extrusion‐based bio‐printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio‐printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio‐printing. The address of these challenges will significantly enhance the capability of extrusion‐based bio‐printing.     

Exploring cellular adhesion and differentiation in a micro‐/nano‐hybrid polymer scaffold

Polymer scaffolds play an important role in three dimensional (3‐D) cell culture and tissue engineering. To best mimic the archiecture of natural extracellular matrix (ECM), a nano‐fibrous and micro‐porous combined (NFMP) scaffold was fabricated by combining phase separation and particulate leaching techniques. The NFMP scaffold possesses architectural features at two levels, including the micro‐scale pores and nano‐scale fibers. To evaluate the advantages of micro/nano combination, control scaffolds with only micro‐pores or nano‐fibers were fabricated. Cell grown in NFMP and control scaffolds were characterized with respect to morphology, proliferation rate, diffentiation and adhesion. The NFMP scaffold combined the advantages of micro‐ and nano‐scale structures. The NFMP scaffold nano‐fibers promoted neural differentiation and induced “3‐D matrix adhesion”, while the NFMP scaffold micro‐pores facilitated cell infiltration. This study represents a systematic comparison of cellular activities on micro‐only, nano‐only and micro/nano combined scaffolds, and demonstrates the unique advantages of the later. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Differentiation potential of human adipose stem cells bioprinted with hyaluronic acid/gelatin‐based bioink through microextrusion and visible light‐initiated crosslinking

Bioprinting has a great potential to fabricate three‐dimensional (3D) functional tissues and organs. In particular, the technique enables fabrication of 3D constructs containing stem cells while maintaining cell proliferation and differentiation abilities, which is believed to be promising in the fields of tissue engineering and regenerative medicine. We aimed to demonstrate the utility of the bioprinting technique to create hydrogel constructs consisting of hyaluronic acid (HA) and gelatin derivatives through irradiation by visible light to fabricate 3D constructs containing human adipose stem cells (hADSCs). The hydrogel was obtained from a solution of HA and gelatin derivatives possessing phenolic hydroxyl moieties in the presence of ruthenium(II) tris‐bipyridyl dication and sodium ammonium persulfate. hADSCs enclosed in the bioprinted hydrogel construct elongated and proliferated in the hydrogel. In addition, their differentiation potential was confirmed by examining the expression of pluripotency marker genes and cell surface marker proteins, and differentiation to adipocytes in adipogenic differentiation medium. Our results demonstrate the great potential of the bioprinting method and the resultant hADSC‐laden HA/gelatin constructs for applications in tissue engineering and regenerative medicine.     

Imaging cardiac extracellular matrices: a blueprint for regeneration

Once damaged, cardiac tissue does not readily repair and is therefore a primary target of regenerative therapies. One regenerative approach is the development of scaffolds that functionally mimic the cardiac extracellular matrix (ECM) to deliver stem cells or cardiac precursor populations to the heart. Technological advances in micro/nanotechnology, stem cell biology, biomaterials and tissue decellularization have propelled this promising approach forward. Surprisingly, technological advances in optical imaging methods have not been fully utilized in the field of cardiac regeneration. Here, we describe and provide examples to demonstrate how advanced imaging techniques could revolutionize how ECM-mimicking cardiac tissues are informed and evaluated.     

Engineering a clinically-useful matrix for cell therapy

The design criteria for matrices for encapsulation of cells for cell therapy include chemical, biological, engineering, marketing, regulatory, and financial constraints. What is required is a biocompatible material for culture of cells in three-dimensions (3-D) that offers ease of use, experimental flexibility to alter composition and compliance, and a composition that would permit a seamless transition from in vitro to in vivo use. The challenge is to replicate the complexity of the native extracellular matrix (ECM) environment with the minimum number of components necessary to allow cells to rebuild a given tissue. Our approach is to deconstruct the ECM to a few modular components that can be reassembled into biomimetic materials that meet these criteria. These semi-synthetic ECMs (sECMs) employ thiol-modified derivatives of hyaluronic acid (HA) that can form covalently crosslinked, biodegradable hydrogels. These sECMs are “living” biopolymers, meaning that they can be crosslinked in the presence of cells or tissues to enable cell therapy and tissue engineering. Moreover, the sECMs allow inclusion of the appropriate biological cues needed to simulate the complexity of the ECM of a given tissue. Taken together, the sECM technology offers a manufacturable, highly reproducible, flexible, FDA-approvable, and affordable vehicle for cell expansion and differentiation in 3-D.Key words: hyaluronan, 3-D cell culture, tissue engineering, extracellular matrix, crosslinked hydrogel, design criteria, commercial utility, stem cells, regenerative medicine     

Directed assembly of cell-laden hydrogels for engineering functional tissues

Tissue engineering aims to develop functionalized tissues for organ replacement or restoration. Biodegradable scaffolds have been used in tissue engineering to support cell growth and maintain mechanical and biological properties of tissue constructs. Ideally cells on these scaffolds adhere, proliferate, and deposit matrix at a rate that is consistent with scaffold degradation. However, the cellular rearrangement within these scaffolds often does not recapitulate the architecture of the native tissues. Directed assembly of tissue-like structures is an attractive alternative to scaffold-based approach for tissue engineering which potentially can build tissue constructs with biomimetic architecture and function. In directed assembly, shape-controlled microstructures are fabricated in which organized structures of different cell types can be used as tissue building blocks. To fabricate tissue building blocks, hydrogels are commonly used as biomaterials for cell encapsulation to mimic the matrix in vivo. The hydrogel-based tissue building blocks can be arranged in pre-defined architectures by various directed tissue assembly techniques. In this paper, recent advances in directed assembly-based tissue engineering are summarized as an emerging alternative to meet challenges associated with scaffold-based tissue engineering and future directions are addressed.     

光交联水凝胶在组织工程中的研究进展

由于生物相容性、可降解性、与天然细胞外基质结构的相似性,水凝胶成为组织工程的研究热点与重点。基于原位形成和可注射性、与现有加工技术(3D打印、静电纺丝)的兼容性,光交联水凝胶在组织工程领域广泛应用。综述了近年来光交联水凝胶在组织工程领域的研究进展,包括其在软骨组织、骨组织、脂肪组织、牙周组织和皮肤组织方面的研究思路及应用进展,以期为后续光交联水凝胶作为组织工程支架的研究提供参考。     

Directed assembly of cell-laden hydrogels for engineering functional tissues

Tissue engineering aims to develop functionalized tissues for organ replacement or restoration. Biodegradable scaffolds have been used in tissue engineering to support cell growth and maintain mechanical and biological properties of tissue constructs. Ideally cells on these scaffolds adhere, proliferate, and deposit matrix at a rate that is consistent with scaffold degradation. However, the cellular rearrangement within these scaffolds often does not recapitulate the architecture of the native tissues. Directed assembly of tissue-like structures is an attractive alternative to scaffold-based approach for tissue engineering which potentially can build tissue constructs with biomimetic architecture and function. In directed assembly, shape-controlled microstructures are fabricated in which organized structures of different cell types can be used as tissue building blocks. To fabricate tissue building blocks, hydrogels are commonly used as biomaterials for cell encapsulation to mimic the matrix in vivo. The hydrogel-based tissue building blocks can be arranged in pre-defined architectures by various directed tissue assembly techniques. In this paper, recent advances in directed assembly-based tissue engineering are summarized as an emerging alternative to meet challenges associated with scaffold-based tissue engineering and future directions are addressed.     

Tunable Collagen I Hydrogels for Engineered Physiological Tissue Micro-Environments

Collagen I hydrogels are commonly used to mimic the extracellular matrix (ECM) for tissue engineering applications. However, the ability to design collagen I hydrogels similar to the properties of physiological tissues has been elusive. This is primarily due to the lack of quantitative correlations between multiple fabrication parameters and resulting material properties. This study aims to enable informed design and fabrication of collagen hydrogels in order to reliably and reproducibly mimic a variety of soft tissues. We developed empirical predictive models relating fabrication parameters with material and transport properties. These models were obtained through extensive experimental characterization of these properties, which include compression modulus, pore and fiber diameter, and diffusivity. Fabrication parameters were varied within biologically relevant ranges and included collagen concentration, polymerization pH, and polymerization temperature. The data obtained from this study elucidates previously unknown fabrication-property relationships, while the resulting equations facilitate informed a priori design of collagen hydrogels with prescribed properties. By enabling hydrogel fabrication by design, this study has the potential to greatly enhance the utility and relevance of collagen hydrogels in order to develop physiological tissue microenvironments for a wide range of tissue engineering applications.     

Investigation of Overrun-Processed Porous Hyaluronic Acid Carriers in Corneal Endothelial Tissue Engineering

Hyaluronic acid (HA) is a linear polysaccharide naturally found in the eye and therefore is one of the most promising biomaterials for corneal endothelial regenerative medicine. This study reports, for the first time, the development of overrun-processed porous HA hydrogels for corneal endothelial cell (CEC) sheet transplantation and tissue engineering applications. The hydrogel carriers were characterized to examine their structures and functions. Evaluations of carbodiimide cross-linked air-dried and freeze-dried HA samples were conducted simultaneously for comparison. The results indicated that during the fabrication of freeze-dried HA discs, a technique of introducing gas bubbles in the aqueous biopolymer solutions can be used to enlarge pore structure and prevent dense surface skin formation. Among all the groups studied, the overrun-processed porous HA carriers show the greatest biological stability, the highest freezable water content and glucose permeability, and the minimized adverse effects on ionic pump function of rabbit CECs. After transfer and attachment of bioengineered CEC sheets to the overrun-processed HA hydrogel carriers, the therapeutic efficacy of cell/biopolymer constructs was tested using a rabbit model with corneal endothelial dysfunction. Clinical observations including slit-lamp biomicroscopy, specular microscopy, and corneal thickness measurements showed that the construct implants can regenerate corneal endothelium and restore corneal transparency at 4 weeks postoperatively. Our findings suggest that cell sheet transplantation using overrun-processed porous HA hydrogels offers a new way to reconstruct the posterior corneal surface and improve endothelial tissue function.     

Synthetic biomimetic hydrogels incorporated with ephrin-A1 for therapeutic angiogenesis

Eph receptors and ephrin ligands are essential for vascular development and angiogenic remodeling. In this work, we developed biomimetic poly(ethylene glycol)-diacrylate hydrogels incorporated with ephrin-A1 and examined their angiogenic properties. Ephrin-A1 was covalently immobilized on the surface of hydrogels by chemical modification and photopolymerization. Ephrin-A1 immobilized on hydrogels was found to retain its capacity to stimulate endothelial cell adhesion in a dose-dependent manner as similar findings were observed on polystyrene culture wells pre-adsorbed with ephrin-A1. Cell adhesion stimulated by ephrin-A1 was abolished by treatment with soluble RGDS and anti-alpha(v)beta3 integrin but not anti-alpha(v)beta5 integrin antibodies, suggesting that ephrin-A1 activates cell adhesion through alpha(v)beta3 integrins. Also, surface immobilized ephrin-A1 was found to induce endothelial tubule formation with luminal diameters ranging 5-30 microm on hydrogels. The results of these studies demonstrate that pro-angiogenic properties of ephrin-A1 are preserved in hydrogels and suggest potential applications of this hydrogel system in regenerative medicine and tissue engineering.     

Nanotechnology in regenerative medicine: the materials side

Regenerative medicine is an emerging multidisciplinary field that aims to restore, maintain or enhance tissues and hence organ functions. Regeneration of tissues can be achieved by the combination of living cells, which will provide biological functionality, and materials, which act as scaffolds to support cell proliferation. Mammalian cells behave in vivo in response to the biological signals they receive from the surrounding environment, which is structured by nanometre-scaled components. Therefore, materials used in repairing the human body have to reproduce the correct signals that guide the cells towards a desirable behaviour. Nanotechnology is not only an excellent tool to produce material structures that mimic the biological ones but also holds the promise of providing efficient delivery systems. The application of nanotechnology to regenerative medicine is a wide issue and this short review will only focus on aspects of nanotechnology relevant to biomaterials science. Specifically, the fabrication of materials, such as nanoparticles and scaffolds for tissue engineering, and the nanopatterning of surfaces aimed at eliciting specific biological responses from the host tissue will be addressed.     

Regenerative biomaterials that "click": simple, aqueous-based protocols for hydrogel synthesis, surface immobilization, and 3D patterning

The click chemistry era has generated a library of versatile "spring-loaded" reactions that offer high yields, regio- and stereospecificity, and outstanding functional group tolerance. These powerful transformations are particularly advantageous for the design of sophisticated biomaterials that require high levels of precision and control, namely, materials that promote tissue regeneration such as hydrogels, 2D functionalized substrates, and 3D biomimetic scaffolds. In this review, the synthesis and application of regenerative biomaterials via click chemistry are summarized. Particular emphasis is placed on the copper(I)-catalyzed alkyne-azide cycloaddition, Diels-Alder cycloadditions, and thiol-click coupling.