Identification and comparison of cutinases for synthetic polyester degradation

Cutinases have been exploited for a broad range of reactions, from hydrolysis of soluble and insoluble esters to polymer synthesis. To further expand the biotechnological applications of cutinases for synthetic polyester degradation, we perform a comparative activity and stability analysis of five cutinases from Alternaria brassicicola (AbC), Aspergillus fumigatus (AfC), Aspergillus oryzae (AoC), Humicola insolens (HiC), and the well-characterized Fusarium solani (FsC). Of the cutinases, HiC demonstrated enhanced poly(ε-caprolactone) hydrolysis at high temperatures and under all pH values, followed by AoC and AfC. Both AbC and FsC are least stable and function poorly at high temperatures as well as at acidic pH conditions. Surface charge calculations and phylogenetic analysis reveal two important modes of cutinase stabilization: (1) an overall neutral surface charge within the “crowning area” by the active site and (2) additional disulfide bond formation. These studies provide insights useful for reengineering such enzymes with improved function and stability for a wide range of biotransformations.     

Unfolding and inactivation of cutinases by AOT and guanidine hydrochloride

We present a comparative analysis of the unfolding and inactivation of three cutinases in the presence of guanidine hydrochloride (GdnHCl) and bis(2-ethylhexyl) sodium sulfosuccinate (AOT). Previous investigations have focused on the cutinase from Fusarium solani pisi (FsC). In addition to FsC, the present study includes the cutinase from Humicola insolens (HiC) and a mutant variant of HiC (muHiC) with increased activity and decreased surfactant sensitivity. Equilibrium and time-resolved denaturation by AOT were studied in aqueous solution and reverse micelles, and were compared with GdnHCl denaturation. The far-UV CD and fluorescence denaturation profiles obtained in the aqueous solutions of the two denaturants coincide for all three cutinases, indicating that unfolding is a co-operative two-state process under these conditions. In reverse micelles, the cutinases unfold with mono-exponential rates, again indicating a two-state process. The free energy of denaturation in water was calculated by linear extrapolation of equilibrium data, yielding very similar values for the three cutinases with averages of -11.6 kcal mol(-1) and -2.6 kcal mol(-1) for GdnHCl and AOT, respectively. Hence, the AOT denatured state (D(AOT)) is less destabilised than the GdnHCl denatured state (D(GdnHCl)), relative to the native state in water. Far-UV CD spectroscopy revealed that D(AOT) retains some secondary structure, while D(GdnHCl) is essentially unstructured. Similarly, fluorescence data suggest that D(AOT) is more compact than D(GdnHCl). Activity measurements reveal that both D(AOT) and D(GdnHCl) are practically inactive (catalytic activity <1% of that of the native enzyme). The fluorescence spectrum of D(AOT) in reverse micelles did not differ significantly from that observed in aqueous AOT. NMR studies of D(AOT) in reverse micelles indicated that the structure is characteristic of a molten globule, consistent with the CD and fluorescence data.     

Functionalization of cellulose acetate fibers with engineered cutinases

In the present work, we describe for the first time the specific role of cutinase on surface modification of cellulose acetate fibers. Cutinase exhibits acetyl esterase activity on diacetate and triacetate of 0.010 U and 0.007 U, respectively. An increase on the hydroxyl groups at the fiber surface of 25% for diacetate and 317% for triacetate, after a 24 h treatment, is estimated by an indirect assay. Aiming at further improvement of cutinase affinity toward cellulose acetate, chimeric cutinases are genetically engineered by fusing the 3′‐end coding sequence with a bacterial or a fungal carbohydrate‐binding module and varying the linker DNA sequence. A comparative analysis of these genetic constructions is presented showing that, the superficial regeneration of cellulose hydrophilicity and reactivity on highly substituted cellulose acetates is achieved by chimeric cutinases. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

A Cutinase from Trichoderma reesei with a Lid-Covered Active Site and Kinetic Properties of True Lipases

Cutinases belong to the α/β-hydrolase fold family of enzymes and degrade cutin and various esters, including triglycerides, phospholipids and galactolipids. Cutinases are able to degrade aggregated and soluble substrates because, in contrast with true lipases, they do not have a lid covering their catalytic machinery. We report here the structure of a cutinase from the fungus Trichoderma reesei (Tr) in native and inhibitor-bound conformations, along with its enzymatic characterization. A rare characteristic of Tr cutinase is its optimal activity at acidic pH. Furthermore, Tr cutinase, in contrast with classical cutinases, possesses a lid covering its active site and requires the presence of detergents for activity. In addition to the presence of the lid, the core of the Tr enzyme is very similar to other cutinase cores, with a central five-stranded β-sheet covered by helices on either side. The catalytic residues form a catalytic triad involving Ser164, His229 and Asp216 that is covered by the two N-terminal helices, which form the lid. This lid opens in the presence of surfactants, such as β-octylglucoside, and uncovers the catalytic crevice, allowing a C11Y4 phosphonate inhibitor to bind to the catalytic serine. Taken together, these results reveal Tr cutinase to be a member of a new group of lipolytic enzymes resembling cutinases but with kinetic and structural features of true lipases and a heightened specificity for long-chain triglycerides.     

Biochemical characterization of the cutinases from Thermobifida fusca

Thermobifida fusca produces two cutinases which share 93% identity in amino acid sequence. In the present study, we investigated the detailed biochemical properties of T. fusca cutinases for the first time. For a better comparison between bacterial and fungal cutinases, recombinant Fusarium solani pisi cutinase was subjected to the similar analysis. The results showed that both bacterial and fungal cutinases are monomeric proteins in solution. The bacterial cutinases exhibited a broad substrate specificity against plant cutin, synthetic polyesters, insoluble triglycerides, and soluble esters. In addition, the two isoenzymes of T. fusca and the F. solani pisi cutinase are similar in substrate kinetics, the lack of interfacial activation, and metal ion requirements. However, the T. fusca cutinases showed higher stability in the presence of surfactants and organic solvents. Considering the versatile hydrolytic activity, good tolerance to surfactants, superior stability in organic solvents, and thermostability demonstrated by T. fusca cutinases, they may have promising applications in related industries.     

Impaired Secretion of a Hydrophobic Cutinase by Saccharomyces cerevisiae Correlates with an Increased Association with Immunoglobulin Heavy-Chain Binding Protein (BiP)

This study focuses on the different efficiencies of secretion of two fungal cutinases by Saccharomyces cerevisiae, a wild-type cutinase (CY000) and a hydrophobic mutant cutinase (CY028). Both cutinases are placed under control of the GAL7 promoter, by which the expression levels can be regulated. Wild-type cutinase was secreted at up to 25 mg per g (dry weight), while CY028 was secreted at a level of 2 mg per g (dry weight); this difference is nearly independent of the expression level. Pulse-chase experiments revealed that whereas CY000 cutinase is secreted, CY028 is irreversibly retained in the cell. Immunogold labelling followed by electron microscopy revealed colocalization of CY028 with immunoglobulin heavy-chain binding protein (BiP) in the endoplasmic reticulum (ER). The increase of wild-type cutinase expression did not result in higher levels of the molecular chaperone BiP, but BiP levels are raised by increased induction of the hydrophobic mutant cutinase. Immunoprecipitation studies showed that in contrast to the wild-type cutinase, the hydrophobic mutant cutinase interacts with BiP. These results indicate that the introduction of two exposed hydrophobic patches in cutinase results in a higher affinity for BiP which might cause the retention of this mutant cutinase in the ER.     

High-level expression and characterization of Fusarium solani cutinase in Pichia pastoris

High-level extracellular production of Fusarium solani cutinase was achieved using a Pichia pastoris expression system. The cutinase-encoding gene was cloned into pPICZαA with the Saccharomyces cerevisiae α-factor signal sequence and methanol-inducible alcohol oxidase promoter by two different ways. The additional sequences of the c-myc epitope and (His)₆-tag of the vector were fused to the C-terminus of cutinase, while the other expression vector was constructed without any additional sequence. P. pastoris expressing the non-tagged cutinase exhibited about two- and threefold higher values of protein amount and cutinase activity in the culture supernatant, respectively. After simple purification by diafiltration process, both cutinases were much the same in the specific activity and the biochemical properties such as the substrate specificity and the effects of temperature and pH. In conclusion, the high-level secretion of F. solani cutinase in P. pastoris was demonstrated for the first time and would be a promising alternative to many expression systems previously used for the large-scale production of F. solani cutinase in Saccharomyces cerevisiae as well as Escherichia coli.     

Phylogenetic analysis and in-depth characterization of functionally and structurally diverse CE5 cutinases

Cutinases are esterases that release fatty acids from the apoplastic layer in plants. As they accept bulky and hydrophobic substrates, cutinases could be used in many applications, ranging from valorization of bark-rich side streams to plastic recycling. Advancement of these applications, however, requires deeper knowledge of cutinases’ biodiversity and structure–function relationships. Here, we mined over 3000 members from carbohydrate esterase family 5 for putative cutinases and condensed it to 151 genes from known or putative lignocellulose-targeting organisms. The 151 genes were subjected to a phylogenetic analysis, which showed that cutinases with available crystal structures were phylogenetically closely related. We then selected nine phylogenic diverse cutinases for recombinant production and characterized their kinetic activity against para-nitrophenol substrates esterified with consecutively longer alkyl chains (pNP-C₂ to C₁₆). Each investigated cutinase had a unique activity fingerprint against the tested pNP substrates. The five enzymes with the highest activity on pNP-C₁₂ and C₁₆, indicative of activity on bulky hydrophobic compounds, were selected for in-depth kinetic and structure–function analysis. All five enzymes showed a decrease in k_cat values with increasing substrate chain length, whereas K_M values and binding energies (calculated from in silico docking analysis) improved. Two cutinases from Fusarium solani and Cryptococcus sp. exhibited outstandingly low K_M values, resulting in high catalytic efficiencies toward pNP-C₁₆. Docking analysis suggested that different clades of the phylogenetic tree may harbor enzymes with different modes of substrate interaction, involving a solvent-exposed catalytic triad, a lipase-like lid, or a clamshell-like active site possibly formed by flexible loops.     

Isolation and characterization of a cutinase from Fusarium roseum culmorum and its immunological comparison with cutinases from F. solani pisi.

Fusarium roseum culmorum, grown on apple cutin as the sole source of carbon, was shown to produce a cutin depolymerizing enzyme. From the extracellular fluid of these F. roseum cultures, a cutinase and a nonspecific esterase were isolated utilizing Sephadex G-100, QAE-Sephadex, and SP-Sephadex chromatography. The homogeneity of the cutinase was verified by polyacrylamide disc gel electrophoresis. The molecular weight of the cutinase was estimated to be 24,300 by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. Electrophoretic mobility of this enzyme was between that of Cutinases I and II from Fusarium solani pisi. The F. roseum cutinase hydrolyzed p-nitrophenyl butyrate and cutin, but not p-nitrophenyl palmitate, while the nonspecific esterase hydrolyzed the long-chain esters. Amino acid composition of F. roseum cutinase was found to be similar to that of F. solani pisi Cutinase I except for differences in the number of serine, valine, and cysteine residues. The time-course, protein concentration dependence, substrate concentration dependence, and pH optimum (10.0 for cutin hydrolysis) of the F. roseum cutinase was similar to the cutinases from F. solani pisi. The F. roseum cutinase was inhibited by diisopropylfluorophosphate and paraoxon, and the [³H]diisopropylphosphate group was covalently attached to the enzyme upon treatment with tritiated diisopropylfluorophosphate. Therefore, it is concluded that catalysis by cutinase involves an “active serine.” Immunochemical studies with a rabbit antibody prepared against F. solani pisi Cutinase I demonstrated that Cutinase II from this organism was immunologically very similar to, but not identical to, Cutinase I. On the other hand, the cutinase from F. roseum was immunologically quite different from the cutinases isolated from F. solani pisi in that it did not cross-react with anticutinase I. However, all three cutinases were virtually identical in their sensitivity to inhibition by anticutinase I, and all three enzymes were virtually completely inhibited by the anticutinase I.     

Thermodynamic and structural investigation of the specific SDS binding of humicola insolens cutinase

The interaction of lipolytic enzymes with anionic surfactants is of great interest with respect to industrially produced detergents. Here, we report the interaction of cutinase from the thermophilic fungus Humicola insolens with the anionic surfactant SDS, and show the enzyme specifically binds a single SDS molecule under nondenaturing concentrations. Protein interaction with SDS was investigated by NMR, ITC and molecular dynamics simulations. The NMR resonances of the protein were assigned, with large stretches of the protein molecule not showing any detectable resonances. SDS is shown to specifically interact with the loops surrounding the catalytic triad with medium affinity (K_a ≈ 10⁵ M⁻¹). The mode of binding is closely similar to that seen previously for binding of amphiphilic molecules and substrate analogues to cutinases, and hence SDS acts as a substrate mimic. In addition, the structure of the enzyme has been solved by X-ray crystallography in its apo form and after cocrystallization with diethyl p-nitrophenyl phosphate (DNPP) leading to a complex with monoethylphosphate (MEP) esterified to the catalytically active serine. The enzyme has the same fold as reported for other cutinases but, unexpectedly, esterification of the active site serine is accompanied by the ethylation of the active site histidine which flips out from its usual position in the triad.     

Three New Cutinases from the Yeast Arxula adeninivorans That Are Suitable for Biotechnological Applications

The genes ACUT1, ACUT2, and ACUT3, encoding cutinases, were selected from the genomic DNA of Arxula adeninivorans LS3. The alignment of the amino acid sequences of these cutinases with those of other cutinases or cutinase-like enzymes from different fungi showed that they all had a catalytic S-D-H triad with a conserved G-Y-S-Q-G domain. All three genes were overexpressed in A. adeninivorans using the strong constitutive TEF1 promoter. Recombinant 6× His (6h)-tagged cutinase 1 protein (p) from A. adeninivorans LS3 (Acut1-6hp), Acut2-6hp, and Acut3-6hp were produced and purified by immobilized-metal ion affinity chromatography and biochemically characterized using p-nitrophenyl butyrate as the substrate for standard activity tests. All three enzymes from A. adeninivorans were active from pH 4.5 to 6.5 and from 20 to 30°C. They were shown to be unstable under optimal reaction conditions but could be stabilized using organic solvents, such as polyethylene glycol 200 (PEG 200), isopropanol, ethanol, or acetone. PEG 200 (50%, vol/vol) was found to be the best stabilizing agent for all of the cutinases, and acetone greatly increased the half-life and enzyme activity (up to 300% for Acut3-6hp). The substrate spectra for Acut1-6hp, Acut2-6hp, and Acut3-6hp were quite similar, with the highest activity being for short-chain fatty acid esters of p-nitrophenol and glycerol. Additionally, they were found to have polycaprolactone degradation activity and cutinolytic activity against cutin from apple peel. The activity was compared with that of the 6× His-tagged cutinase from Fusarium solani f. sp. pisi (FsCut-6hp), also expressed in A. adeninivorans, as a positive control. A fed-batch cultivation of the best Acut2-6hp-producing strain, A. adeninivorans G1212/YRC102-ACUT2-6H, was performed and showed that very high activities of 1,064 U ml⁻¹ could be achieved even with a nonoptimized cultivation procedure.     

Identification and characterization of bacterial cutinase

Cutinase, which exists in both fungi and bacteria, catalyzes the cleavage of the ester bonds of cutin. Fungal cutinases have been extensively studied, however, reports on bacterial cutinases have been limited due to the lack of knowledge concerning the identity of their open reading frames. In the present study, the cutinase from Thermobifida fusca was induced by cutin and purified to homogeneity by following p-nitrophenyl butyrate hydrolyzing activity. Peptide mass fingerprinting analysis of the wild-type enzyme matched two proteins, Tfu_0883 and Tfu_0882, which are 93% identical in sequence. Both proteins were cloned and overexpressed in their mature form. Recombinant Tfu_0883 and Tfu_0882 display very similar enzymatic properties and were confirmed to be cutinases by their capability to hydrolyze the ester bonds of cutin. Comparative characterization of Fusarium solani pisi and T. fusca cutinases indicated that they have similar substrate specificity and catalytic properties except that the T. fusca enzymes are thermally more stable. Homology modeling revealed that T. fusca cutinases adopt an alpha/beta-hydrolase fold that exhibits both similarities and variations from the fungal cutinase structure. A serine hydrolase catalytic mechanism involving a Ser(170)-His(248)-Asp(216) (Tfu_0883 numbering) catalytic triad was supported by active site-directed inhibition studies and mutational analyses. This is the first report of cutinase encoding genes from bacterial sources.     

Evidence for a constitutive cytoplasmic cutinase in ungerminated conidia of Botrytis cinerea Pers.: Fr.

Cytoplasmic soluble proteins from ungerminated conidia of Botrytis cinerea exhibited cutinase activity, while cell wall binding proteins lacked this activity. Cutinase activity in proteins extracted from cell walls and cytoplasm of ungerminated conidia of Botrytis cinerea was determined using p-nitrophenyl butyrate (PNB) and TLC analysis of products derived from hydrolysis of [³H]cutin. Treatment of conidia with indoxyl acetate, a substrate indicative of non-specific esterase and cutinase activity, also gave a positive reaction in the cytoplasm of ungerminated conidia. The possible role of a putative constitutive cutinase in the cytoplasm of conidia in the early stages of infection of plants by B. cinerea is discussed.     

Effects of different solid state fermentation substrate on biochemical properties of cutinase from Fusarium sp.

The present results demonstrate that the catalytic characteristics of cutinase produced by the same strain differ depending on the culture medium used. This conclusion was possible after the study of biochemical characterization and enantioselective properties of cutinases produced by Fusarium oxysporum in four different culture mediums. The mediums were composed of wheat bran, soybean rind, rice bran and Jatropha curcas seed cake, different Brazilian agricultural by-products. The largest difference can be observed on cutinase produced by J. curcas seed cake. This enzyme has been activated in most metal ions tested and exhibited excellent stability in organic solvent, especially hexane. The cutinase produced in rice bran showed greatest activity in the presence of p-nitrophenyl butyrate as a substrate, whereas the other enzymes showed greatest activity in the presence of p-nitrophenyl caprilate. Regarding enantioselective properties the cutinase produced in soybean rind showed the best result compared to enzymes produced in wheat bran.     

Cloning and analysis of CUT1, a cutinase gene from Magnaporthe grisea

Summary A gene from Magnaporthe grisea was cloned using a cDNA clone of the Colletotrichum gloeosporioides cutinase gene as a heterologous probe; the nucleotide sequence of a 2 kb DNA segment containing the gene has been determined. DNA hybridization analysis shows that the M. grisea genome contains only one copy of this gene. The predicted polypeptide contains 228 amino acids and is homologous to the three previously characterized cutinases, showing 74% amino acid similarity to the cutinase of C. gloeosporioides. Comparison with previously determined cutinase sequences suggests that the gene contains two introns, 115 and 147 bp in length. The gene is expressed when cutin is the sole carbon source but not when the carbon source is cutin and glucose together or glucose alone. Levels of intracellular and extracellular cutinase activity increase in response to growth in the presence of cutin. The activity level is higher in a transformant containing multiple copies of the cloned gene than in the parent strain. Non-denaturing polyacrylamide gels stained for esterase activity show a single major band among intracellular and extracellular proteins from cutin-grown cultures that is not present among intracellular and extracellular proteins prepared from glucose-grown or carbon-starved cultures. This band stains more intensely in extracts from the multicopy transformant than in extracts from the parent strain. We conclude that the cloned DNA contains a M. grisea gene for cutinase, which we have named CUT1.     

Purification and characterization of mycobacterial phospholipase A: an activity associated with mycobacterial cutinase

We describe mycobacterial phospholipase A activity (MPLA) and, using reverse genetics, have associated this activity with putative mycobacterial cutinase. PLAs, which hydrolyze fatty acids on phospholipids, play a significant role in human inflammatory states and disease pathogenesis. In prokaryotes, the recognition of their role in virulence is more recent. Cutinases are serine esterases whose primary substrate is cutin, the waxy exterior layer of plants. Mycobacterium tuberculosis has maintained seven putative cutinases, though it should not encounter cutin; we demonstrate that known cutinases and MPLA cleave phospholipids in a PLA-type manner and also hydrolyze Tween. We analyzed cutinase motifs in mycobacteria and found the motif very prevalent. All mycobacteria tested had MPLA activity. These studies suggest an alternative use for putative cutinases by the M. tuberculosis group that is likely related to MPLA activity and lipid metabolism.     

Protein stabilization with a dipeptide‐mimic triazine‐scaffolded synthetic affinity ligand

Protein stabilization was achieved by a novel approach based on the adsorption and establishment of affinity‐like interactions with a biomimetic triazine‐scaffolded ligand. A synthetic lead compound (ligand 3′/11, K_a ≈ 10⁴ M^?1) was selected from a previously screened solid‐phase library of affinity ligands for studies of adsorption and stabilization of cutinase from Fusarium solani pisi used as a model system. This ligand, directly synthesized in agarose by a well‐established solid‐phase synthesis method, was able to strongly bind cutinase and led to impressive half‐lives of more than 8 h at 70 °C, and of approximately 34 h at 60 °C for bound protein (a 25‐ and 57‐fold increase as compared with the free enzyme, respectively). The ligand density in the solid matrix was found to be a determinant parameter for cutinase stabilization. It is conceivable that the highly stabilizing effect observed results from the binding of more than one ligand residue to the enzyme, creating specific macromolecular configurations that lock structural mobility thus improving molecular stability. Copyright © 2013 John Wiley & Sons, Ltd.     

Affinity purification and characterization of a cutinase from the fungal plant pathogen Monilinia fructicola (Wint.) honey

Trifluoromethyl ketones (TFK) are potent inhibitors of a variety of serine hydrolases. The TFK inhibitor, 3-(4-mercaptobutylthio)-1,1,1-trifluoro-2-propanone (MBTFP), was found to competitively inhibit cutinase activity (I50 = 9.4 x 10(-3)) from the fungal plant pathogen Monilinia fructicola and to serve as an effective affinity ligand for the purification of cutinases from culture filtrates. The TFK inhibitors, 3-n-octylthio-1,1,1-trifluoro-2-propanone (OTFP) and 3-n-pentylthio-1,1,1-trifluoro-2-propanone (PTFP), also inhibited cutinase activity with I50 values of 1.6 x 10(-6) and 2.3 x 10(-4) M, respectively. Buffer containing OTFP was the strongest eluant for cutinases of M. fructicola and provided the best purification factor and yield, although buffers containing OTFP, detergent, and salt were found to be effective for eluting cutinases bound to MBTFP-Sepharose. Buffer containing 0.5% Triton X-100 also selectively eluted cutinases from the affinity column. Two-dimensional electrophoretic analysis by SDS-PAGE and isoelectric focusing of the affinity-purified cutinase fraction indicated activity associated with proteins of pI 8.2 and molecular masses of approximately 18.6 and 20.8 kDa. These proteins hydrolyzed [3H]cutin and artificial substrates such as p-nitrophenylbutyrate and related esters, typical of other cutinases, but differ from previously characterized cutinases in molecular mass. The two low-molecular-weight proteins resolved by 2-D gel electrophoresis were subjected to in-gel digestion with Lys-C and the resulting peptide fragments were separated by Microbore-HPLC. The amino acid sequences of several internal peptide fragments had high homology with cutinase sequences from other fungi, particularly the plant pathogen Botrytis cinerea. Our study illustrates the potential of TFK ligands for the affinity purification of cutinases and indicates that the cutinases from M. fructicola have novel features warranting further study.     

Purification and characterization of novel cutinase from nasturtium (Tropaeolum majus) pollen.

Cutinase from pollen grains of Tropaeolum majus was purified by Sephadex G-100 gel filtration, QAE-Sephadex chromatography, and isoelectric focusing. The purified enzyme was homogeneous as judged by polyacrylamide gel electrophoresis in the presence and absence of sodium dodecyl sulfate. The molecular weight of the enzyme was estimated to be 40,000 by both Sephadex G-100 gel filtration and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This cutinase was found to be a glycoprotein containing about 7% carbohydrate and the isoelectric point of this enzyme was 5.45. It catalyzed hydrolysis of p-nitrophenyl esters of C₂ to C₁₈ fatty acids with similar K_m and V. The purified cutinase showed an optimum pH of 6.8 with cutin as the substrate, whereas with p-nitrophenyl esters of fatty acids the optimum pH was 8.0. This enzyme did not show any metal ion requirement. Unlike the previously studied fungal cutinases, the present pollen enzyme was strongly inhibited by thiol-directed reagents such as N-ethylmaleimide and p-hydroxymercuribenzoate whereas it was totally insensitive to the active serine-directed reagent, diisopropylfluorophosphate. The purified pollen cutinase showed preference for primary alcohol esters, but it did not catalyze hydrolysis of tripalmitoyl or trioleyl glycerol at significant rates. The properties of the pollen enzyme are, in general, in sharp contrast to those of the fungal cutinase, and the present results strongly suggest that the pollen enzyme belongs to a new class of cutinases. Another esterase which preferentially hydrolyzed p-nitrophenyl acetate was also found in the extracellular fluid. This enzyme, separated from cutinase, showed a pI of 5.6 and it was sensitive to diisopropylfluorophosphate, but not to SH-directed reagents.