Disruption of the gene encoding the cell adhesion molecule DdCAD-1 leads to aberrant cell sorting and cell-type proportioning during Dictyostelium development

The cadA gene in Dictyostelium encodes the Ca2+-dependent cell adhesion molecule DdCAD-1, which is expressed soon after the initiation of development. To investigate the biological role of DdCAD-1, the cadA gene was disrupted by homologous recombination. The cadA-null cells showed a 50% reduction in EDTA-sensitive cell adhesion. The remaining EDTA-sensitive adhesion sites were resistant to dissociation by anti-DdCAD-1 antibody, suggesting that they were distinct adhesion sites. Cells that lacked DdCAD-1 were able to complete development and form fruiting bodies. However, they displayed abnormal slug morphology and culmination was delayed by approximately 6 hours. The yield of spores was reduced by approximately 50%. The proportion of prestalk cells in cadA(-) slugs showed a 2.5-fold increase over the parental strain. When cadA(-) cells were transfected with pcotB::GFP to label prespore cells, aberrant cell-sorting patterns in slugs became apparent. When mutant prestalk cells were mixed with wild-type prespore cells, mutant prestalk cells were unable to return to the anterior position of chimeric slugs, suggesting defects in the sorting mechanism. The wild-type phenotype was restored when cadA(-) cells were transfected with a cadA-expression vector. These results indicate that, in addition to cell-cell adhesion, DdCAD-1 plays a role in cell type proportioning and pattern formation.     

Regulation of cell-cell adhesion during Dictyostelium development

During development of Dictyostelium, four adhesion systems have been identified and adherens junction-like structures have been discovered in the fruiting body. The temporal and spatial expression of cell adhesion molecules (CAMs) is under stringent developmental control, corresponding to major shifts in morphological complexity. Genetic manipulations, including over-expression and knockout mutations, of the adhesion genes, cadA (encoding DdCAD-1), csaA (gp80) and lagC (gp150), have shed light on new roles for cell adhesion molecules in aggregate size regulation, cell-type proportioning, cell differentiation and cell sorting. As cell-cell interactions remain highly dynamic within cell streams and aggregates, mechanisms must exist to facilitate the rapid assembly and disassembly of adhesion complexes. Studies on gp80 have led to a model for the rapid assembly of adhesion complexes via lipid rafts.     

The cell adhesion molecule DdCAD-1 regulates morphogenesis through differential spatiotemporal expression in Dictyostelium discoideum

During development of Dictyostelium, multiple cell types are formed and undergo a coordinated series of morphogenetic movements guided by their adhesive properties and other cellular factors. DdCAD-1 is a unique homophilic cell adhesion molecule encoded by the cadA gene. It is synthesized in the cytoplasm and transported to the plasma membrane by contractile vacuoles. In chimeras developed on soil plates, DdCAD-1-expressing cells showed greater propensity to develop into spores than did cadA-null cells. When development was performed on non-nutrient agar, wild-type cells sorted from the cadA-null cells and moved to the anterior zone. They differentiated mostly into stalk cells and eventually died, whereas the cadA-null cells survived as spores. To assess the role of DdCAD-1 in this novel behavior of wild-type and mutant cells, cadA-null cells were rescued by the ectopic expression of DdCAD-1-GFP. Morphological studies have revealed major spatiotemporal changes in the subcellular distribution of DdCAD-1 during development. Whereas DdCAD-1 became internalized in most cells in the post-aggregation stages, it was prominent in the contact regions of anterior cells. Cell sorting was also restored in cadA(-) slugs by exogenous recombinant DdCAD-1. Remarkably, DdCAD-1 remained on the surface of anterior cells, whereas it was internalized in the posterior cells. Additionally, DdCAD-1-expressing cells migrated slower than cadA(-) cells and sorted to the anterior region of chimeric slugs. These results show that DdCAD-1 influences the sorting behavior of cells in slugs by its differential distribution on the prestalk and prespore cells.     

Regulation of cell–cell adhesion during Dictyostelium development

During development of Dictyostelium, four adhesion systems have been identified and adherens junction-like structures have been discovered in the fruiting body. The temporal and spatial expression of cell adhesion molecules (CAMs) is under stringent developmental control, corresponding to major shifts in morphological complexity. Genetic manipulations, including over-expression and knockout mutations, of the adhesion genes, cadA (encoding DdCAD-1), csaA (gp80) and lagC (gp150), have shed light on new roles for cell adhesion molecules in aggregate size regulation, cell-type proportioning, cell differentiation and cell sorting. As cell–cell interactions remain highly dynamic within cell streams and aggregates, mechanisms must exist to facilitate the rapid assembly and disassembly of adhesion complexes. Studies on gp80 have led to a model for the rapid assembly of adhesion complexes via lipid rafts.     

Regulation of spatiotemporal expression of cell-cell adhesion molecules during development of Dictyostelium discoideum

The social amoeba Dictyostelium discoideum is a simple but powerful model organism for the study of cell-cell adhesion molecules and their role in morphogenesis during development. Three adhesive systems have been characterized and studied in detail. The spatiotemporal expression of these adhesion proteins is stringently regulated, often coinciding with major shifts in the morphological complexity of development. At the onset of development, amoeboid cells express the Ca(2+) -dependent cell-cell adhesion molecule DdCAD-1, which initiates weak homophilic interactions between cells and assists in the recruitment of individuals into cell streams. DdCAD-1 is unique because it is synthesized as a soluble protein in the cytoplasm. It is targeted for presentation on the cell surface by an unconventional protein transport mechanism via the contractile vacuole. Concomitant with the aggregation stage is the expression of the contact sites A glycoprotein csA/gp80 and TgrC1, both of which mediate Ca(2+) /Mg(2+) -independent cell-cell adhesion. Whereas csA/gp80 is a homophilic binding protein, TgrC1 binds to a heterophilic receptor on the cell. During cell aggregation, csA/gp80 associates preferentially with lipid rafts, which facilitate the rapid assembly of adhesion complexes. TgrC1 is synthesized at low levels during aggregation and rapid accumulation occurs initially in the peripheral cells of loose mounds. The extracellular portion of TgrC1 is shed and becomes part of the extracellular matrix. Additionally, analyses of knockout mutants have revealed important biological roles played by these adhesion proteins, including size regulation, cell sorting and cell-type proportioning.     

Cell Adhesion Molecule DdCAD-1 Is Imported into Contractile Vacuoles by Membrane Invagination in a Ca2+- and Conformation-dependent Manner

The cadA gene in Dictyostelium encodes a Ca²⁺-dependent cell adhesion molecule DdCAD-1 that contains two β-sandwich domains. DdCAD-1 is synthesized in the cytoplasm as a soluble protein and then transported by contractile vacuoles to the plasma membrane for surface presentation or secretion. DdCAD-1-green fluorescent protein (GFP) fusion protein was expressed in cadA-null cells for further investigation of this unconventional protein transport pathway. Both morphological and biochemical characterizations showed that DdCAD-1-GFP was imported into contractile vacuoles. Time-lapse microscopy of transfectants revealed the transient appearance of DdCAD-1-GFP-filled vesicular structures in the lumen of contractile vacuoles, suggesting that DdCAD-1 could be imported by invagination of contractile vacuole membrane. To assess the structural requirements in this transport process, the N-terminal and C-terminal domains of DdCAD-1 were expressed separately in cells as GFP fusion proteins. Both fusion proteins failed to enter the contractile vacuole, suggesting that the integrity of DdCAD-1 is required for import. Such a requirement was also observed in in vitro reconstitution assays using His₆-tagged fusion proteins and purified contractile vacuoles. Import of DdCAD-1 was compromised when two of its three Ca²⁺-binding sites were mutated, indicating a role for Ca²⁺ in the import process. Spectral analysis showed that mutations in the Ca²⁺-binding sites resulted in subtle conformational changes. Indeed, proteins with altered conformation failed to enter the contractile vacuole, suggesting that the import signal is somehow integrated in the three-dimensional structure of DdCAD-1.     

Solution structures of the adhesion molecule DdCAD-1 reveal new insights into Ca(2+)-dependent cell-cell adhesion

DdCAD-1 is a novel Ca(2+)-dependent cell adhesion molecule that lacks a hydrophobic signal peptide and a transmembrane domain. DdCAD-1 is expressed by the social amoeba Dictyostelium discoideum at the onset of development. It is synthesized as a soluble protein and then transported to the plasma membrane by contractile vacuoles. Here we describe the novel features of the solution structures of Ca(2+)-free and Ca(2+)-bound monomeric DdCAD-1. DdCAD-1 contains two beta-sandwich domains, belonging to the betagamma-crystallin and immunoglobulin fold classes, respectively. Whereas the N-terminal domain has a major role in homophilic binding, the C-terminal domain tethers the protein to the cell membrane. From structural and mutational analyses, we propose a model for the Ca(2+)-bound DdCAD-1 dimer as a basis for understanding DdCAD-1-mediated cell-cell adhesion at the molecular level. Our results provide new insights into Ca(2+)-dependent mechanisms for cell-cell adhesion.     

ATP-Binding Cassette Transporter B4 Anchors the Cell Adhesion Molecule DdCAD-1 to Cell Membrane in Dictyostelium discoideum

In Dictyostelium, soluble cell adhesion molecule, DdCAD-1, regulates cell–cell interaction through an unknown anchoring protein on the plasma membrane. Far western blot analysis using different probes revealed that the potential DdCAD-1 interacting protein was between 64 and 98 kDa. To isolate and identify the anchoring protein, GST-DdCAD-1 and anchoring protein were cross-linked in vivo by chemical cross-linker and stable protein complex was isolated by co-immunoprecipitation assays. The protein cross-linked to DdCAD-1 was extracted from the gel slice and trypsinized. The peptides were subjected to analysis by mass spectrometry, which showed that the putative anchoring protein belongs to ATP-binding cassette transporter family.     

The Cell Adhesion Molecule DdCAD-1 in Dictyostelium Is Targeted to the Cell Surface by a Nonclassical Transport Pathway Involving Contractile Vacuoles

DdCAD-1 is a 24-kD Ca²⁺-dependent cell– cell adhesion molecule that is expressed soon after the initiation of development in Dictyostelium cells. DdCAD-1 is present on the cell surface as well as in the cytosol. However, the deduced amino acid sequence of DdCAD-1 lacks a hydrophobic signal peptide or any predicted transmembrane domain, suggesting that it may be presented on the cell surface via a nonclassical transport mechanism. Here we report that DdCAD-1 is transported to the cell surface via contractile vacuoles, which are normally involved in osmoregulation. Immunofluorescence microscopy and subcellular fractionation revealed a preferential association of DdCAD-1 with contractile vacuoles. Proteolytic treatment of isolated contractile vacuoles degraded vacuole-associated calmodulin but not DdCAD-1, demonstrating that DdCAD-1 was present in the lumen. The use of hyperosmotic conditions that suppress contractile vacuole activity led to a dramatic decrease in DdCAD-1 accumulation on the cell surface and the absence of cell cohesiveness. Shifting cells back to a hypotonic condition after hypertonic treatments induced a rapid increase in DdCAD-1–positive contractile vacuoles, followed by the accumulation of DdCAD-1 on the cell membrane. 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole, a specific inhibitor of vacuolar-type H⁺-ATPase and thus of the activity of contractile vacuoles, also inhibited the accumulation of DdCAD-1 on the cell surface. Furthermore, an in vitro reconstitution system was established, and isolated contractile vacuoles were shown to import soluble DdCAD-1 into their lumen in an ATP-stimulated manner. Taken together, these data provide the first evidence for a nonclassical protein transport mechanism that uses contractile vacuoles to target a soluble cytosolic protein to the cell surface.The cellular slime mold Dictyostelium discoideum transits from the solitary amoeboid state to an organized multicellular structure during development. This process is initiated in cells upon the depletion of nutrients, leading to the expression of many developmentally regulated genes and the chemotactic migration of cells in response to extracellular cAMP. Cells stream in concentric rings and/or spirals toward aggregation centers, giving rise to multicellular entities called pseudoplasmodia or slugs. The migrating slugs eventually culminate in the formation of fruiting bodies consisting of primarily spores and stalk cells (for review see Loomis, 1975).Multicellularity during development is maintained by the expression of cell–cell adhesion molecules, which fall into two broad categories based on their sensitivity to EDTA (for reviews see Gerisch, 1980; Siu et al., 1988; Siu, 1990; Fontana, 1995; Bozzaro and Ponte, 1995). There are two types of EDTA-sensitive cell adhesion sites. The EDTA/EGTA-sensitive cell adhesion sites, also known as contact sites B, are mediated by the Ca²⁺-dependent cell adhesion molecule gp24/DdCAD-1 (Knecht et al., 1987; Brar and Siu, 1993), while the EDTA-sensitive/EGTA- resistant sites are probably mediated by a Mg²⁺-dependent cell adhesion molecule (Fontana, 1993). The molecular nature of the latter sites is not yet known. Both types of adhesion sites are responsible for cell–cell interactions in the early stages of development. Coinciding with the aggregation stage is the rapid accumulation of the cell adhesion molecule gp80, which mediates the EDTA-resistant cell adhesion sites or contact sites A (Muller and Gerisch, 1978; Siu et al., 1985; Kamboj et al., 1988, 1989). In postaggregation stages, the EDTA-resistant adhesion sites are mediated by the membrane glycoprotein gp150 (Geltosky et al., 1979; Siu et al., 1983; Gao et al., 1992).DdCAD-1 is expressed by cells soon after the initiation of development (Knecht et al., 1987). Antibodies raised against gel-purified DdCAD-1 specifically inhibit the EDTA/EGTA-sensitive cell–cell adhesion sites and block development (Loomis, 1988). We have purified DdCAD-1 to homogeneity and demonstrated that labeled soluble DdCAD-1 binds to cells in an EDTA/EGTA-sensitive manner (Brar and Siu, 1993). Binding of DdCAD-1 to cells is prevented when cells are precoated with anti– DdCAD-1 antibodies, consistent with a homophilic mode of interaction. In addition, binding of DdCAD-1 to cells inhibits cell reassociation, indicating that it contains only a single cell binding site.Recent cloning of the DdCAD-1 cDNA predicts a protein of 23,924 daltons (Wong et al., 1996). The deduced amino acid sequence of DdCAD-1 shows significant sequence similarities with members of the cadherin family, and it contains a Ca²⁺-binding motif residing in the carboxy-terminal region. Indeed, Ca²⁺ overlay experiments have shown that DdCAD-1 is a Ca²⁺-binding protein with multiple binding sites (Brar and Siu, 1993; Wong et al., 1996). It is therefore conceivable that DdCAD-1 is a primitive member of the cadherin superfamily and it may mediate cell–cell adhesion in a manner similar to that of cadherins (Shapiro et al., 1995; Nagar et al., 1996). Another novel feature of the predicted sequence is that it lacks an amino-terminal hydrophobic signal peptide or a transmembrane domain, suggesting that DdCAD-1 is a soluble protein. Consistent with this observation, both subcellular fractionation and immunofluorescence microscopy have revealed a predominant cytoplasmic localization of DdCAD-1, indicating that 60–80% of DdCAD-1 is soluble (Brar and Siu, 1993; Sesaki and Siu, 1996). However, IgG binding and capping experiments clearly demonstrate that a substantial amount of DdCAD-1 is present on the cell surface (Brar and Siu, 1993; Wong et al., 1996). Interestingly, DdCAD-1 undergoes rapid translocation from the cytoplasm to the plasma membrane in the preaggregation stage of development (Sesaki and Siu, 1996), and then it becomes concentrated on filopodial structures and in cell– cell contact regions. These observations thus raise the question of how DdCAD-1 is transported and anchored to the cell surface.In this report we present morphological and biochemical evidence that DdCAD-1 is transported to the cell surface from the cytosol via contractile vacuoles, which is known so far to function exclusively in osmoregulation in cells. Furthermore, we show that isolated contractile vacuoles selectively take up soluble DdCAD-1 into their lumen in a cell-free system. Our results demonstrate, for the first time, a protein targeting function for contractile vacuoles and a novel nonclassical protein transport mechanism.     

Heavy Metal and Disinfectant Resistance of Listeria monocytogenes from Foods and Food Processing Plants

The persistence of Listeria monocytogenes in food processing plants and other ecosystems reflects its ability to adapt to numerous stresses. In this study, we investigated 138 isolates from foods and food processing plants for resistance to the quaternary ammonium disinfectant benzalkonium chloride (BC) and to heavy metals (cadmium and arsenic). We also determined the prevalence of distinct cadmium resistance determinants (cadA1, cadA2, and cadA3) among cadmium-resistant isolates. Most BC-resistant isolates were resistant to cadmium as well. Arsenic resistance was encountered primarily in serotype 4b and was an attribute of most isolates of the serotype 4b epidemic clonal group ECIa. Prevalence of the known cadmium resistance determinants was serotype associated: cadA1 was more common in isolates of serotypes 1/2a and 1/2b than 4b, while cadA2 was more common in those of serotype 4b. A subset (15/77 [19%]) of the cadmium-resistant isolates lacked the known cadmium resistance determinants. Most of these isolates were of serotype 4b and were also resistant to arsenic, suggesting novel determinants that may confer resistance to both cadmium and arsenic in these serotype 4b strains. The findings may reflect previously unrecognized components of the ecological history of different serotypes and clonal groups of L. monocytogenes, including exposures to heavy metals and disinfectants.     

Mitogen-activated protein kinase 4 is involved in the regulation of mitotic and cytokinetic microtubule transitions in Arabidopsis thaliana

? A mitogen-activated protein kinase kinase kinase (MAPKKK) double mutant, Arabidopsis homologue of nucleus and phragmoplast associated kinase (anp) anp2anp3, and the mitogen-activated protein kinase (MAPK) 4 mutant mpk4 of Arabidopsis thaliana show prominent cytokinetic defects. This prompted the analysis of mitotic and cytokinetic progression as a function of MAPK signalling. Mutants were compared with wild types untreated or treated with the specific MAPKK inhibitor PD98059. ? This study included phenotype analysis, expression analysis of the MPK4 promoter, immunofluorescent localization of MPK4, tubulin and MAP65-1, and time-lapse microscopic visualization of the mitotic microtubule (MT) transitions in control, mutant and inhibitor-treated cells. ? Mutant and inhibitor-treated cells showed defects in mitosis and cytokinesis, including aberrant spindle and phragmoplast formation and drastically delayed or abortive mitosis and cytokinesis. As a result, bi- and multinucleate cells were formed, ultimately disturbing the vegetative tissue patterning. MPK4 was localized to all stages of the expanding phragmoplast, in a pattern similar to that of its putative substrate MAP65-1. ? In this study, MPK4 is shown to be involved in the regulation of mitosis/cytokinesis through modulation of the cell division plane and cytokinetic progression.     

Root nodule Bradyrhizobium spp. harbor tfdAalpha and cadA, homologous with genes encoding 2,4-dichlorophenoxyacetic acid-degrading proteins

The distribution of tfdAalpha and cadA, genes encoding 2,4-dichlorophenoxyacetate (2,4-D)-degrading proteins which are characteristic of the 2,4-D-degrading Bradyrhizobium sp. isolated from pristine environments, was examined by PCR and Southern hybridization in several Bradyrhizobium strains including type strains of Bradyrhizobium japonicum USDA110 and Bradyrhizobium elkanii USDA94, in phylogenetically closely related Agromonas oligotrophica and Rhodopseudomonas palustris, and in 2,4-D-degrading Sphingomonas strains. All strains showed positive signals for tfdAalpha, and its phylogenetic tree was congruent with that of 16S rRNA genes in alpha-Proteobacteria, indicating evolution of tfdAalpha without horizontal gene transfer. The nucleotide sequence identities between tfdAalpha and canonical tfdA in beta- and gamma-Proteobacteria were 46 to 57%, and the deduced amino acid sequence of TfdAalpha revealed conserved residues characteristic of the active site of alpha-ketoglutarate-dependent dioxygenases. On the other hand, cadA showed limited distribution in 2,4-D-degrading Bradyrhizobium sp. and Sphingomonas sp. and some strains of non-2,4-D-degrading B. elkanii. The cadA genes were phylogenetically separated between 2,4-D-degrading and nondegrading strains, and the cadA genes of 2,4-D degrading strains were further separated between Bradyrhizobium sp. and Sphingomonas sp., indicating the incongruency of cadA with 16S rRNA genes. The nucleotide sequence identities between cadA and tftA of 2,4,5-trichlorophenoxyacetate-degrading Burkholderia cepacia AC1100 were 46 to 53%. Although all root nodule Bradyrhizobium strains were unable to degrade 2,4-D, three strains carrying cadA homologs degraded 4-chlorophenoxyacetate with the accumulation of 4-chlorophenol as an intermediate, suggesting the involvement of cadA homologs in the cleavage of the aryl ether linkage. Based on codon usage patterns and GC content, it was suggested that the cadA genes of 2,4-D-degrading and nondegrading Bradyrhizobium spp. have different origins and that the genes would be obtained in the former through horizontal gene transfer.     

Regulation of multiple cell cycle events by Cdc14 homologues in vertebrates

Whereas early cytokinesis events have been relatively well studied, little is known about its final stage, abscission. The Cdc14 phosphatase is involved in the regulation of multiple cell cycle events, and in all systems studied Cdc14 misexpression leads to cytokinesis defects. In this work, we have cloned two CDC14 cDNA from Xenopus, including a previously unreported CDC14B homologue. We use Xenopus and human cell lines and demonstrate that localization of Cdc14 proteins is independent of both cell-type and species specificity. Ectopically expressed XCdc14A is centrosomal in interphase and localizes to the midbody in cytokinesis. By using XCdc14A misregulation, we confirm its control over different cell cycle events and unravel new functions during abscission. XCdc14A regulates the G1/S and G2/M transitions. We show that Cdc25 is an in vitro substrate for XCdc14A and might be its target at the G2/M transition. Upregulated wild-type or phosphatase-dead XCdc14A arrest cells in a late stage of cytokinesis, connected by thin cytoplasmic bridges. It does not interfere with central spindle formation, nor with the relocalization of passenger protein and centralspindlin complexes to the midbody. We demonstrate that XCdc14A upregulation prevents targeting of exocyst and SNARE complexes to the midbody, both essential for abscission to occur.     

The aurora-related kinase AIR-2 recruits ZEN-4/CeMKLP1 to the mitotic spindle at metaphase and is required for cytokinesis

BACKGROUND: The Aurora/Ipl1p-related kinase AIR-2 is required for mitotic chromosome segregation and cytokinesis in early Caenorhabditis elegans embryos. Previous studies have relied on non-conditional mutations or RNA-mediated interference (RNAi) to inactivate AIR-2. It has therefore not been possible to determine whether AIR-2 functions directly in cytokinesis or if the cleavage defect results indirectly from the failure to segregate DNA. One intriguing hypothesis is that AIR-2 acts to localize the mitotic kinesin-like protein ZEN-4 (also known as CeMKLP1), which later functions in cytokinesis. RESULTS: Using conditional alleles, we established that AIR-2 is required at metaphase or early anaphase for normal segregation of chromosomes, localization of ZEN-4, and cytokinesis. ZEN-4 is first required late in cytokinesis, and also functions to maintain cell separation through much of the subsequent interphase. DNA segregation defects alone were not sufficient to disrupt cytokinesis in other mutants, suggesting that AIR-2 acts specifically during cytokinesis through ZEN-4. AIR-2 and ZEN-4 shared similar genetic interactions with the formin homology (FH) protein CYK-1, suggesting that AIR-2 and ZEN-4 function in a single pathway, in parallel to a contractile ring pathway that includes CYK-1. Using in vitro co-immunoprecipitation experiments, we found that AIR-2 and ZEN-4 interact directly. CONCLUSIONS: AIR-2 has two functions during mitosis: one in chromosome segregation, and a second, independent function in cytokinesis through ZEN-4. AIR-2 and ZEN-4 may act in parallel to a second pathway that includes CYK-1.     

Dnt1 acts as a mitotic inhibitor of the spindle checkpoint protein dma1 in fission yeast

The Schizosaccharomyces pombe checkpoint protein Dma1 couples mitotic progression with cytokinesis and is important in delaying mitotic exit and cytokinesis when kinetochores are not properly attached to the mitotic spindle. Dma1 is a ubiquitin ligase and potential functional relative of the human tumor suppressor Chfr. Dma1 delays mitotic exit and cytokinesis by ubiquitinating a scaffold protein (Sid4) of the septation initiation network, which, in turn, antagonizes the ability of the Polo-like kinase Plo1 to promote cell division. Here we identify Dnt1 as a Dma1-binding protein. Several lines of evidence indicate that Dnt1 inhibits Dma1 function during metaphase. First, Dnt1 interacts preferentially with Dma1 during metaphase. Second, Dma1 ubiquitin ligase activity and Sid4 ubiquitination are elevated in dnt1 cells. Third, the enhanced mitotic defects in dnt1Δ plo1 double mutants are partially rescued by deletion of dma1(+), suggesting that the defects in dnt1 plo1 double mutants are attributable to excess Dma1 activity. Taken together, these data show that Dnt1 acts to restrain Dma1 activity in early mitosis to allow normal mitotic progression.     

Construction of an Escherichia coli strain unable to synthesize putrescine, spermidine, or cadaverine: characterization of two genes controlling lysine decarboxylase.

We have previously described a polyamine-deficient strain of Escherichia coli that contained deletions in speA (arginine decarboxylase), speB (agmatine ureohydrolase), speC (ornithine decarboxylase), and speD (adenosylmethionine decarboxylase). Although this strain completely lacked putrescine and spermidine, it was still able to grow at a slow rate indefinitely on amine-deficient media. However, these cells contained some cadaverine (1,5-diaminopentane). To rule out the possibility that the presence of cadaverine permitted the growth of this strain, we isolated a mutant (cadA) that is deficient in cadaverine biosynthesis, namely, a mutant lacking lysine decarboxylase, and transduced this cadA gene into the delta (speA-speB) delta speC delta D strain. The resultant strain had essentially no cadaverine but showed the same phenotypic characteristics as the parent. Thus, these results confirm our previous findings that the polyamines are not essential for the growth of E. coli or for the replication of bacteriophages T4 and T7. We have mapped the cadA gene at 92 min; the gene order is mel cadA groE ampA purA. A regulatory gene for lysine decarboxylase (cadR) was also obtained and mapped at 46 min; the gene order is his cdd cadR fpk gyrA.