Characteristics of adjacent family 6 acetylxylan esterases from Fibrobacter succinogenes and the interaction with the Xyn10E xylanase in hydrolysis of acetylated xylan

Acetylxylan esterase genes axe6A and axe6B located adjacent to one another on a Fibrobacter succinogenes chromosome have been separately cloned and their properties characterized. The corresponding esterases contained an N-terminal carbohydrate esterase family 6 catalytic domain (CD) and a C-terminal family 6 carbohydrate-binding module (CBM). The amino acid sequences of the CDs and CBMs were found to exhibit 52% and 40% amino acid similarity, respectively. The CDs of the two esterases exhibited the highest similarity to CDs of acetylxylan esterases: AxeA from the ruminal fungi Orpinomyces sp. and BnaA from Neocallimastix patriciarum. Axe6A and Axe6B were optimally active at neutral pH and had low K(m) values of 0.084 and 0.056 mmol x L(-1), respectively. Axe6A and Axe6B were shown to bind to insoluble cellulose and xylan and to soluble arabinoxylan. Axe6A deacetylated acetylated xylan at the same initial rate in the presence and absence of added Xyn10E xylanase from F. succinogenes, but the action of the xylanase on acetylated xylan was dependent upon the initial activity of Axe6A. The capacity of acetylxylan esterases to bind to plant cell wall polymers and to independently deacetylate xylan enabling xylanase to release xylooligo saccharides, documents the central role these enzymes have to improve access of F. succinogenes to cellulose.     

Characterization and mode of action of two acetyl xylan esterases from Chrysosporium lucknowense C1 active towards acetylated xylans

Two novel acetyl xylan esterases, Axe2 and Axe3, from Chrysosporium lucknowense (C1), belonging to the carbohydrate esterase families 5 and 1, respectively, were purified and biochemically characterized. Axe2 and Axe3 are able to hydrolyze acetyl groups both from simple acetylated xylo-oligosaccharides and complex non-soluble acetylglucuronoxylan. Both enzymes performed optimally at pH 7.0 and 40 °C.Axe2 has a clear preference for acetylated xylo-oligosaccharides (AcXOS) with a high degree of substitution and Axe3 does not show such preference. Axe3 has a preference for large AcXOS (DP 9-12) when compared to smaller AcXOS (especially DP 4-7) while for Axe2 the size of the oligomer is irrelevant. Even though there is difference in substrate affinity towards acetylated xylooligosaccharides from Eucalyptus wood, the final hydrolysis products are the same for Axe2 and Axe3: xylo-oligosaccharides containing one acetyl group located at the non-reducing xylose residue remain as examined using MALDI-TOF MS, CE-LIF and the application of an endo-xylanase (GH 10).     

The vicinal hydroxyl group is prerequisite for metal activation of Clostridium thermocellum acetylxylan esterase

Positional specificity of NodB-like domain of a multidomain xylanase U from Clostridium thermocellum (CtAxe) was investigated. Of three monoacetates of 4-nitrophenyl β-d-xylopyranoside the acetylxylan esterase domain showed a clear preference for the 2-acetate. Moreover, the enzyme was significantly activated by Co²⁺. Acetylated methyl β-d-xylopyranosides were deacetylated slightly better at position 3 than at position 2, suggesting that the enzyme binds the substrate with the small methyl aglycone also in the opposite orientation. Nevertheless, both positions 2 and 3 of methyl β-d-xylopyranoside were deacetylated much faster in the presence of the activating metal ion. In contrast, replacement of the hydroxyl group at either of these positions with fluorine or hydrogen, as well as acetylation of both positions, abolished the enzyme activity, regardless the absence or the presence of Co²⁺. Thus, the presence of the free vicinal hydroxyl group seems to be a prerequisite not only for an efficient deacetylation of position 2 or 3, but also for the activation of the enzyme with cobalt ion. The demonstrated involvement of the vicinal hydroxyl groups in the mechanism of deacetylation is in accord with 3-D structures of CtAxe as well as other CE4 metal-dependent deacetylases.     

Action of xylan deacetylating enzymes on monoacetyl derivatives of 4-nitrophenyl glycosides of β-D-xylopyranose and α-L-arabinofuranose

Measurements of esterase activity by enzyme-coupled assays on monoacetates of 4-nitrophenyl β-d-xylopyranoside and 4-nitrophenyl α-l-arabinofuranoside showed that acetylxylan esterases of families 1, 4 and 5 produced by Trichoderma reesei and Penicillium purpurogenum have a strong preference for deacetylation of position 2 in xylopyranosides. The acetylxylan esterases exhibit only weak activity on acetylated arabinofuranosides, with 2-acetate as the best substrate. Acetyl esterases of family 16 produced by the same two fungi deacetylate in xylopyranosides preferentially positions 3 and 4. Their specific activity on arabinofuranosides is also much lower than on xylopyranosides, however, substantially greater than that in the case of typical acetylxylan esterases.     

Purification and characterization of two thermostable acetyl xylan esterases from Thermoanaerobacterium sp. strain JW/SL-YS485.

Two acetyl esterases (EC 3.1.1.6) were purified to gel electrophoretic homogeneity from Thermoanaerobacterium sp. strain JW/SL-YS485, an anaerobic, thermophilic endospore former which is able to utilize various substituted xylans for growth. Both enzymes released acetic acid from chemically acetylated larch xylan. Acetyl xylan esterases I and II had molecular masses of 195 and 106 kDa, respectively, with subunits of 32 kDa (esterase I) and 26 kDa (esterase II). The isoelectric points were 4.2 and 4.3, respectively. As determined by a 2-min assay with 4-methylumbelliferyl acetate as the substrate, the optimal activity of acetyl xylan esterases I and II occurred at pH 7.0 and 80 degrees C and at pH 7.5 and 84 degrees C, respectively. Km values of 0.45 and 0.52 mM 4-methylumbelliferyl acetate were observed for acetyl xylan esterases I and II, respectively. At pH 7.0, the temperatures for the 1-h half-lives for acetyl xylan esterases I and II were 75 degrees and slightly above 100 degrees C, respectively.     

Detection and production condition of acetylxylan esterase from a wood-rotting fungus,Coriolus versicolor

Acetyl esterase production was detected in a wood-rotting fungus,Coriolus versicolor, by the formation of a clear zone on a double layer agar plate containing glucose β-d-pentaacetate. Two polysaccharide acetates, carboxymethyl cellulose acetate and xylan acetate, also served as detectable substrates in place of glucose acetate to form clear zone. In an esterase assay, this fungal esterase showed a higher specificity to acetylxylan than did porcine liver esterase, indicating that it is an acetylxylan esterase.     

The acetyl xylan esterase II gene from Penicillium purpurogenum is differentially expressed in several carbon sources, and tightly regulated by pH

The expression of the acetyl xylan esterase II (axeII) gene from Penicillium purpurogenum is repressed by glucose and induced by xylan, as well as to a small degree by xylose and xylitol. This gene is expressed at neutral pH, but not under alkaline or acidic conditions, in agreement with previous findings for other xylanolytic genes of this organism. This is the first report showing pH regulation of an axe gene.     

Distribution of acetyl esterase in wood-rotting fungi

The distribution of acetyl esterase was studied in 30 strains of wood-rotting fungi. A screening test on agar plates using glucose β-d-pentaacetate as a substrate indicated that all tested fungi produced acetyl esterase to form a clear zone on the culture. All fungi also showed positive responses in an agar test using carboxymethyl cellulose acetate. Enzyme assay showed that extracellular acetylxylan esterase activity was present in the filtrates of wood-meal culture of all these fungi. The ratio of fungal acetylxylan esterase activity to 4-nitrophenyl acetyl esterase activity were higher than that of porcine liver esterase, indicating that fungal esterases have high affinity for acetylated carbohydrates. Acetyl esterase is suggested to be distributed widely in wood-rotting fungi for degradation of native acetylated hemicelluloses.     

Heterologous expression of thermostable acetylxylan esterase gene from Thermobifida fusca and its synergistic action with xylanase for the production of xylooligosaccharides

The axe gene which encodes an acetylxylan esterase from Thermobifida fusca NTU22, was cloned, sequenced and expressed in Escherichia coli. The gene consists of 786 base pairs and encodes a protein of 262 amino acids. The deduced amino acid sequence of the acetylxylan esterase axe exhibited a high degree of similarity with BTA-hydrolase from T. fusca DSM43793, esterase from Thermobifida alba and lipase from Streptomyces albus. The optimal pH and temperature of the purified esterase were 7.5 and 60 °C, respectively. Cooperative enzymatic treatment of oat-spelt xylan by transformant xylanase and acetylxylan esterase significantly increased the xylooligosaccharides production compared with the xylanase or acetylxylan esterase action alone. The synergy of transformant acetylxylan esterase and xylanase cannot increase the production of reducing sugars from lignocellulolytic substrate, bagasse.     

Three-dimensional structure of the catalytic core of acetylxylan esterase from Trichoderma reesei: insights into the deacetylation mechanism

Acetylxylan esterase from Trichoderma reesei removes acetyl side groups from xylan. The crystal structure of the catalytic core of the enzyme was solved at 1.9 A resolution. The core has an alpha/beta/alpha sandwich fold, similar to that of homologous acetylxylan esterase from Penicillium purpurogenum and cutinase from Fusarium solani. All three enzymes belong to family 5 of the carbohydrate esterases and the superfamily of the alpha/beta hydrolase fold. Evidently, the enzymes have diverged from a common ancestor and they share the same catalytic mechanism. The catalytic machinery of acetylxylan esterase from T. reesei was studied by comparison with cutinase, the catalytic site of which is well known. Acetylxylan esterase is a pure serine esterase having a catalytic triad (Ser90, His187, and Asp175) and an oxyanion hole (Thr13 N, and Thr13 O gamma). Although the catalytic triad of acetylxylan esterase has been reported previously, there has been no mention of the oxyanion hole. A model for the binding of substrates is presented on the basis of the docking of xylose. Acetylxylan esterase from T. reesei is able to deacetylate both mono- and double-acetylated residues, but it is not able to remove acetyl groups located close to large side groups such as 4-O-methylglucuronic acid. If the xylopyranoside residue is double-acetylated, both acetyl groups are removed by the catalytic triad: first one acetyl group is removed and then the residue is reorientated so that the nucleophilic oxygen of serine can attack the second acetyl group.     

Action of different types of endoxylanases on eucalyptus xylan in situ

Most studies of the mode of action of industrially important endoxylanases have been done on alkali extracted-plant xylan. In just few cases, the native form of the polysaccharide, acetylated xylan, was used as a substrate. In this work action of xylanases belonging to three glycoside hydrolase families, GH10, GH11, and GH30 was investigated on acetylglucuronoxylan directly in hardwood cell walls. Powdered eucalyptus wood was used as xylanase substrate. Enzyme-generated fragments were characterized by TLC, MALDI ToF MS, and NMR spectroscopy. All three xylanases generated from eucalyptus wood powder acetylated xylooligosaccharides. Those released by GH10 enzyme were the shortest, and those released by GH30 xylanase were of the largest diversity. For GH30 xylanase the 4-O-methyl-D-glucuronic acid (MeGlcA) side residues function as substrate specificity determinants regardless the acetylation of the neighboring hydroxyl group. Much simpler xylooligosaccharide patterns were observed when xylanases were applied in combination with carbohydrate esterase family 6 acetylxylan esterase. In the presence of the esterase, all aldouronic acids remained 3-O-acetylated on the xylopyranosyl (Xylp) residue substituted with MeGlcA. The 3-O-acetyl group, in contrast to the acetyl groups of otherwise unsubstituted Xylp residues, does not affect the mode of action of endoxylanases, but contributes to recalcitrance of the acidic xylan fragments. The results confirm importance of acetylxylan esterases in microbial degradation of acetylated hardwood glucuronoxylan. They also point to still unresolved question of efficient enzymatic removal of the 3-O-acetyl group on MeGlcA-substituted Xylp residues negatively affecting the saccharification yields.

     

Mode of action of acetylxylan esterases on acetyl glucuronoxylan and acetylated oligosaccharides generated by a GH10 endoxylanase

Background

Substitutions on the xylan main chain are widely accepted to limit plant cell wall degradability and acetylations are considered as one of the most important obstacles. Hence, understanding the modes of action of a range of acetylxylan esterases (AcXEs) is of ample importance not only to increase the understanding of the enzymology of plant decay/bioremediation but also to enable efficient bioconversion of plant biomass.

Methods

In this study, the modes of action of acetylxylan esterases (AcXEs) belonging to carbohydrate esterase (CE) families 1, 4, 5 and 6 on xylooligosaccharides generated from hardwood acetyl glucuronoxylan were compared using MALDI ToF MS. Supporting data were obtained by following enzymatic deacetylation by ¹H NMR spectroscopy.

Conclusions

None of the used enzymes were capable of complete deacetylation, except from linear xylooligosaccharides which were completely deacetylated by some of the esterases in the presence of endoxylanase. A clear difference was observed between the performance of the serine-type esterases of CE families 1, 5 and 6, and the aspartate-metalloesterases of family CE4. The difference is mainly due to the inability of CE4 AcXEs to catalyze deacetylation of 2,3-di-O-acetylated xylopyranosyl residues. Complete deacetylation of a hardwood acetyl glucuronoxylan requires additional deacetylating enzyme(s).

General significance

The results contribute to the understanding of microbial degradation of plant biomass and outline the way to achieve complete saccharification of plant hemicelluloses which did not undergo alkaline pretreatment.     

Deacetylation of xylans by acetyl esterases of Trichoderma reesei

Summary Two previously purified esterases of Trichoderma reesei were used to study the deacetylation of polymeric, oligomeric and dimeric acetylated xylan fragments. For the first time nearly complete enzymatic deacetylation of polymeric xylan with purified acetyl xylan esterase was demonstrated, resulting in precipitation of the remaining polymer structure. The esterases had very different substrate specifities, one having a preference for high molecular weight substrates and the other showing high activity only towards acetyl xylobiose. The latter enzyme was also regioselective, cleaving off the acetyl substituent only from the C-3 position of the xylopyranose ring. The highest xylose yield from acetylated xylan was obtained by the synergistic action of xylanase, \-xylosidase and acetyl xylan esterase. Offprint requests to: M. Sundberg     

Penicillium purpurogenum produces a family 1 acetyl xylan esterase containing a carbohydrate-binding module: characterization of the protein and its gene

At least three acetyl xylan esterases (AXE I, II and III) are secreted by Penicillium purpurogenum. This publication describes more detailed work on AXE I and its gene. AXE I binds cellulose but not xylan; it is glycosylated and inactivated by phenylmethylsulphonyl fluoride, showing that it is a serine esterase. The axe1 gene presents an open reading frame of 1278 bp, including two introns of 68 and 61 bp; it codes for a signal peptide of 31 residues and a mature protein of 351 amino acids (molecular weight 36,693). AXE I has a modular structure: a catalytic module at the amino terminus belonging to family 1 of the carbohydrate esterases, a linker rich in serines and threonines, and a family 1 carboxy terminal carbohydrate binding module (CBM). The CBM is similar to that of AXE from Trichoderma reesei, (with a family 5 catalytic module) indicating that the genes for catalytic modules and CBMs have evolved separately, and that they have been linked by gene fusion. The promoter sequence of axe1 contains several putative sequences for binding of gene expression regulators also found in other family 1 esterase gene promoters. It is proposed that AXE I and II act in succession in xylan degradation; first, xylan is attacked by AXE I and other xylanases possessing CBMs (which facilitate binding to lignocellulose), followed by other enzymes acting mainly on soluble substrates.     

Structure and activity of two metal ion-dependent acetylxylan esterases involved in plant cell wall degradation reveals a close similarity to peptidoglycan deacetylases

The enzymatic degradation of plant cell wall xylan requires the concerted action of a diverse enzymatic syndicate. Among these enzymes are xylan esterases, which hydrolyze the O-acetyl substituents, primarily at the O-2 position of the xylan backbone. All acetylxylan esterase structures described previously display a alpha/beta hydrolase fold with a "Ser-His-Asp" catalytic triad. Here we report the structures of two distinct acetylxylan esterases, those from Streptomyces lividans and Clostridium thermocellum, in native and complex forms, with x-ray data to between 1.6 and 1.0 A resolution. We show, using a novel linked assay system with PNP-2-O-acetylxyloside and a beta-xylosidase, that the enzymes are sugar-specific and metal ion-dependent and possess a single metal center with a chemical preference for Co2+. Asp and His side chains complete the catalytic machinery. Different metal ion preferences for the two enzymes may reflect the surprising diversity with which the metal ion coordinates residues and ligands in the active center environment of the S. lividans and C. thermocellum enzymes. These "CE4" esterases involved in plant cell wall degradation are shown to be closely related to the de-N-acetylases involved in chitin and peptidoglycan degradation (Blair, D. E., Schuettelkopf, A. W., MacRae, J. I., and Aalten, D. M. (2005) Proc. Natl. Acad. Sci. U. S. A., 102, 15429-15434), which form the NodB deacetylase "superfamily."     

Purification and properties of an acetylxylan esterase from Thermobifida fusca

An acetylxylan esterase from Thermobifida fusca NTU22 was purified 51-fold as measured by specific activity from crude culture filtrate by ultrafiltration concentration, Sepharose CL-6B and DEAE-Sepharose CL-6B column chromatography. The overall yield of the purified enzyme was 14.4%. The purified enzyme gave an apparent single protein band on an SDS-PAGE. The molecular mass of purified enzyme as estimated by SDS-PAGE and by gel filtration on Sepharose CL-6B was found to be 30 and 28kDa, respectively, indicating that the acetylxylan esterase from T. fusca NTU22 is a monomer. The pI value of the purified enzyme was estimated to be 6.55 by isoelectric focusing gel electrophoresis. The N-terminal amino acid sequence of the purified esterase was ANPYERGP. The optimum pH and temperature for the purified enzyme were 8.0 and 80°C, respectively. The Zn(2+), Hg(2+), PMSF and DIPF inhibited the enzyme activity. The K(m) value for p-nitrophenyl acetate and acetylxylan were 1.86μM and 0.15%, respectively. Co-operative enzymatic degradation of oat-spelt xylan by purified acetylxylan esterase and xylanase significantly increased the acetic acid liberation compared to the acetylxylan esterase action alone.     

热解纤维素菌属F32中乙酰木聚糖酯酶Axe7的表征

【目的】从嗜热厌氧微生物热解纤维素菌属F32(Caldicellulosiruptor sp.F32)菌株中鉴定出可水解木聚糖侧链乙酰基团的脂酶。【方法】通过基因组序列注释、比对以及蛋白结构预测的方法,发现一个潜在的脂酶7家族的(CE-7)乙酰木聚糖脂酶Axe7。利用基因克隆、质粒构建以及在大肠杆菌中表达目标蛋白并纯化等实验方法,获得了该酶的重组蛋白。【结果】以4-甲基乙酸伞形酯(4-Methylumbelliferyl-acetate)作为底物时,该酶的最适反应p H在6.5-7.0之间,最适反应温度为85°C,在最适的温度和p H条件下,Axe7活性半衰期(Half-life)超过4 h。在不同金属离子(1.5 mmol/L)存在下,Axe7活性可保持为最适反应酶活的(66.3±4.6)%-(95.7±2.3)%之间,说明金属离子对其酶活有一定的影响。通过测定酶动力学发现Axe7的Km和kcat值分别为0.39 mmol/L和66.95 s-1。【结论】从高温厌氧微生物中发现并表征一个热稳定性良好的乙酰木聚糖脂酶,为木质纤维素的高温糖化和生物炼制提供了一个可工业化的潜在选择。     

Some Properties of Extracellular Acetylxylan Esterase Produced by the Yeast Rhodotorula mucilaginosa

The red yeast Rhodotorula mucilaginosa produced an esterase that accumulated in the culture supernatant on induction with triacetin. The enzyme was specific for substrates bearing an O-acetyl group, but was relatively nonspecific for the rest of the molecule, which could consist of a phenol, a monosaccharide, a polysaccharide, or an aliphatic alcohol. The esterase was more active against acetylxylan and glucose beta-d-pentaacetate than were a number of esterases from plant and animal sources, when activities on 4-nitrophenyl acetate were compared. The enzyme exhibited Michaelis-Menten kinetics and was active over a broad pH range (5.5 to 9.2), with an optimum between pH 8 and 10. In addition, the enzyme retained its activity for 2 h at 55 degrees C. The yeast that produced the enzyme did not produce xylanase and, hence, is of interest for the production of acetylxylan esterase that is free of xylanolytic activity.     

Diversity of plant cell wall esterases in thermophilic and thermotolerant fungi

Fourteen thermophilic and thermotolerant fungal strains isolated from composting soils produced plant cell wall-acting esterases in a medium containing corn cobs and oat spelt xylan. The concentrated and dialyzed protein extracts of these fungi were fractionated using isoelectric-focusing, gels sliced and eluted protein in each slice was assayed for esterase activity against p-nitrophenyl acetate. A total of 84 esterases detected on the basis of pI were found to show distinct preferential substrate specificities towards p-nitrophenyl acetate, p-nitrophenyl ferulate and p-nitrophenyl butyrate, and were putatively classified as acetyl esterases and esterases types I and II. None of the esterases were active against p-nitrophenyl myristate. In addition, these esterases were characterized as acid, neutral or alkaline active.