Characterization of a cryptic plasmid pPZZ84 from Bacillus pumilus

The complete nucleotide sequence of a cryptic plasmid pPZZ84 from Bacillus pumilus strain ZZ84 was determined. Plasmid pPZZ84 is 6817 bp long with GC content of 36.7%. Seven putative open reading frames were identified. ORF7 shows 91% and 90% amino acid identity with rep proteins of pSH1452 and pPL1, respectively, members of rolling-circle replication (RCR) pC194-family. A typical pC194-family double strand origin (dso), a single-stranded origin (sso) and rap (regulator aspartate phosphatase) proteins were also identified in the plasmid. These results imply that pPZZ84 belongs to the Bacillus subtilis species group of small rolling circle (BsSRC) replicating plasmids. The plasmid copy number of pPZZ84 in B. pumilus ZZ84 was estimated to be 46 per cell, more than that of other BsSRC plasmids in their hosts.     

The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19.

Summary pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 by direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 by direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pT1319 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.     

Detection, cloning, and sequence analysis of an indigenous plasmid from cellulolytic clostridial strain MCF1

Nucleotide sequence analysis of a 2451-bp plasmid (pMCF1) from a cellulolytic Clostridium revealed that the protein specified by the largest open reading frame (ORF1) was homologous to RepB of Clostridium butyricum plasmid pCB101. The data suggest that pMCF1 belongs to the pC194 family of rolling-circle replicating plasmids and the ORF1 protein functions as its replication protein.     

DNA sequence analysis of a putative primary replicon from a cryptic plasmid pNM214 of a hydrocarbon utilizing marine <Emphasis Type="Italic">Bacillus</Emphasis> strain NM21

Marine Bacillus strain NM21 isolated from hydrocarbon-contaminated site at Naval Harbour, Mumbai grows on high-speed diesel as a source of carbon and energy. This bacterium harbours four plasmids in it. The smallest plasmid, pNM214 was digested with EcoRI enzyme and cloned in pUC19 vector. The clone Om4 containing largest insert of >3.5 kb was sequenced by primer walking. DNA sequence analysis showed this fragment to be homologous to replication initiation protein (rep) gene and dso (double strand origin) of different plasmids from Bacillus subtilis and Bacillus pumilus species. The putative rep gene sequence of pNM214 showed 74.3–91.6% DNA identity to B. subtilis plasmids (pTA1015, pTA1060 and pTA1040) and 86.3% to 88.9% DNA identity to B. pumilus plasmids (pPL7065, pPL10 and pSH1452). The translated amino acid sequence of rep shows that it contains all the three conserved motifs present in the Rep protein of pC194 family of plasmids. DNA sequence comparison of putative dso of pNM214 with other bacillus plasmids belonging to pC194 group shows that it contains highly conserved nick site sequence 5′-TCTTTTCTTATCTTGATA-3′ and surrounding inverted repeats. Thus, it indicates that pNM214 to be a rolling circle replicating plasmid belonging to the pC194 group. The presence of rep and dso like sequences in the sequenced EcoRI fragment indicate that the cloned fragment contain putative primary replicon of pNM214.     

A novel cryptic plasmid pBMB175 from <Emphasis Type="Italic">Bacillus thuringiensis </Emphasis>subsp. <Emphasis Type="Italic">tenebrionis </Emphasis>YBT-1765

A new cryptic plasmid pBMB175 from Bacillus thuringiensis subsp. tenebrionis YBT-1765 was isolated and characterized. Sequence analysis showed that pBMB175 (14,841 bp and 31% GC content) contained at least eighteen putative open reading frames (ORFs), among which nine ORFs displayed the homology with the hypothetical proteins in rolling-circle replication plasmid pGI3. Deletion analysis revealed that the pBMB175 minireplicon located in a novel 1,151 bp fragment. This fragment contains ORF7 coding sequence, which encodes a protein (Rep175, 149 amino acids [aa]) indispensable for plasmid replication. Rep175 has no significant homology with known function proteins. Furthermore, a putative double-strand origin (dso), having no DNA similarity with characterized dso of other replicon so far, was identified in this minireplicon fragment. These features showed that pBMB175 could be placed into a new plasmid family.     

Cloning and Characterization of the Replicon of the Nocardia italica Plasmid, pNI100

A 19-kb plasmid, pNI100, was isolated from Nocardia italica CCRC12359; its replicon was cloned and characterized as having a single open reading frame (ORF) of 1188 bp specifying 396 amino acids (aa). Analyses of the deduced aa sequence of the Rep protein indicated that characteristics of three consensus sequences and a P-loop-like motif in the Rep protein of plasmid pSG5, a conjugative plasmid involving a rolling-circle replication mechanism, were conserved in those of plasmid pNI100. Phenotypically, a pock structure was produced in the regenerated mycelium by introducing pNI100 DNA into the Streptomyces lividans protoplast. This result strongly suggests that pNI100 is a conjugative plasmid and probably replicates by a rolling-circle replication mechanism. By using the replicon of pNI100, a bifunctional plasmid pNI105 that could replicate in both Escherichia coli and S. lividans was constructed and found to be a useful cloning shuttle vector.     

Isolation and sequence analysis of a small cryptic plasmid pRK10 from a corrosion inhibitor degrading strain Serratia marcescens ACE2

The nucleotide sequence of a smallest cryptic plasmid pRK10 of Serratia marcescens ACE2 was determined. When compared to the all other plasmids reported so far from S. marcescens in sizes of over 70 kb, pRK10 is only 4241 bp long with 53% G + C content and has five coding sequences representing a coding percentage of 65.41. This small plasmid consists of one Tdh gene, four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. Analysis of the five open reading frames identified on the plasmid suggests the presence of genes involved in replication and mobilization containing sequences homologous to the bom region and mobCABD genes of ColE1 and Tdh from Acinetobacter baumannii str. AYE. Results also indicate that pRK10 does not encode any gene for antibiotic/heavy metal resistance. Copy number and incompatibility of the plasmid with plasmids of ColE1 origin of replication was determined and it is quite stable in its natural host as well as in Escherichia coli DH5α. This relatively small plasmid will be useful for construction of shuttle vectors to facilitate the genetic analysis.     

Complete nucleotide sequence of a cryptic plasmid, pbaw301, from the ruminai anaerobe Ruminococcus flavefaciens R13e2

Abstract The complete nucleotide sequence of a cryptic plasmid designated pBAW301, from the Gram-positive ruminai bacterium Ruminococcus flavefaciens R13e2, has been determined. This plasmid is 1768 bp in size and has an overall G+C content of 43.5%. Computer analysis of the sequence data revealed an open reading frame, ORF1 (256 amino acids), which is similar to the Rep protein of the Bacillus borstelensis plasmid pHT926. ORF1 is preceded by Shine-Dalgarno and Escherichia coli —10 and —35 like sequences. Nine smaller open reading frames showed no significant homologies to known protein sequences. Analysis of replication intermediates and the nucleotide sequence indicate that the plasmid does not replicate by a rolling-circle mode of replication similar to other plasmids from Gram-positive bacteria. Moreover, sequences typical of theta replication origins were not found in the nucleotide sequence of pBAW301. These data suggest that this plasmid either replicates by an as yet undescribed mechanism, or represents a new class of theta replicating plasmids.     

Plasmid content of salt stress-tolerant <Emphasis Type="Italic">Rhizobium</Emphasis> strains from Egyptian soils nodulating common bean (<Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L.)

Plasmid profile analysis is useful to characterize Rhizobium strains within the same species. Among the 16 Rhizobium strains examined, 14 had distinct plasmid profiles. The size of plasmids ranged from 40 to 650 kb, and three plasmids of 650, 510 and 390 kb were common to several strains. Plasmid analysis revealed that Rhizobium etli contained a mega-plasmid, similar in size to Rhizobium tropici. All the salt-tolerant strains examined had a plasmid of 250 kb, except for strain EBRI 29. This suggests that this plasmid may play an important adaptive role under salt stress conditions.     

The patchwork nature of rolling-circle plasmids: comparison of six plasmids from two distinct Bacillus thuringiensis serotypes

Bacillus thuringiensis, the entomopathogenic bacteria from the Bacillus cereus group, harbors numerous extrachromosomal molecules whose sizes vary from 2 to more than 200kb. Apart from the genes coding for the biopesticide delta-endotoxins located on large plasmids, little information has been obtained on these plasmids and their contribution to the biology of their host. In this paper, we embarked on a detailed comparison of six small rolling-circle replicating (RCR) plasmids originating from two major B. thuringiensis strains. The complete nucleotide sequences of plasmid pGI1, pGI2, pGI3, pTX14-1, pTX14-2, and pTX14-3 have been obtained and compared. Replication functions, comprising, for each plasmid, the gene encoding the Rep-protein, double-strand origin of replication (dso), single-strand origin of replication (sso), have been identified and analyzed. Two new families, or homology groups, of RCR plasmids originated from the studies of these plasmids (Group VI based on pGI3 and Group VII based on pTX14-3). On five of the six plasmids, loci involved in conjugative mobilization (Mob-genes and origin of transfer (oriT)) were identified. Plasmids pTX14-1, pTX14-2, and pTX14-3 each harbor an ORF encoding a polypeptide containing a central domain with repetitive elements similar to eukaryotic collagen (Gly-X-Y triplets). These genes were termed bcol for Bacillus-collagen-like genes.     

Sequencing and Characterization of Plasmid pUIBI-1 from <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis> Serovar <Emphasis Type="Italic">entomocidus</Emphasis> LBIT-113

Plasmid pUIBI-1 from Bacillus thuringiensis svr. entomocidus was sequenced and its replication mechanism analyzed. Sequence analysis revealed that pUIBI-1 contains 4671 bp and a 32% GC content. Plasmid pUIBI-1 also includes at least seven putative open reading frames (ORFs) encoding for proteins ranging from 5 to 50 kDa. ORF-1 encodes for a putative 16-kDa Rep protein, which lacks homology with proteins of similar function. ORF2 encodes for a protein of 50 kDa and shows homology with Mob proteins of plasmids pLUB1000 from Lactobacillus hilgardii (32.2%) and pGI2 from B. thuringiensis (33.7%). Detection of single-stranded DNA (ssDNA) intermediates indicated that pUIBI-1 replicates by the rolling-circle replication mechanism, as demonstrated by S1 treatment and Southern hybridization under non-denaturing conditions.     

Theta replication of the lactococcal plasmid pWVO2

pWVO2 is a 3.8 kb narrow-host-range plasmid from Lactococcus lactis ssp. cremoris Wg2, which does not replicate in Bacillus subtilis or Escherichia coli. Single-stranded pWVO2 DNA was not observed in lactococcal cells, indicating that this plasmid does not replicate via a rolling-circle mechanism. The sequence of pWVO2 neither showed the structural organization typical for rolling-circle plasmids, nor were sequence similarities with known rolling-circle plasmids present. By 2-D agarose gel electrophoresis of replication intermediates, it was shown that pWVO2 replicates via a theta mechanism. This is the first proof for the existence of theta-replicating plasmids in lactococci. The pWVO2 minimal replicon is strongly related to that of several other lactococcal plasmid replicons. It contains one open reading frame encoding the replication protein, which is preceded by a 22 bp sequence tandemly repeated three and a half times. Further upstream is another 10bp direct repeat present in an A/T-rich sequence. This structural organization resembles that of several iteroncontaining theta-type plasmids from E. coli. Derivatives of pWVO2 were stably maintained in L. lactis and are good candidates for the development of stable food-grade cloning vectors for this organism.     

Cloning and molecular characterization of a novel rolling-circle replicating plasmid, pK1S-1, from Bacillus thuringiensis subsp. kurstaki K1

Bacillus thuringiensis, an entomopathogenic bacterium belonging to the B. cereus group, harbors numerous extra-chromosomal DNA molecules whose sizes range from 2 to 250 kb. In this study, we used a plasmid capture system (PCS) to clone three small plasmids from B. thuringiensis subsp. kurstaki Kl which were not found in B. thuringiensis subsp. kurstaki HD-1, and determined the complete nucleotide sequence of plasmid pKlS-1 (5.5 kb). Of the six putative open reading frames (ORF2-ORF7) in pKlS-1, ORF2 (MobKl) showed approximately 90% aa identity with the Mob-proteins of pGI2 and pTX14-2, which are rolling circle replicating group VII (RCR group VII) plasmids from B. thuringiensis. In addition, a putative origin of transfer (oriT) showed 95.8% identity with those of pGI2 and pTX14-2. ORF3 (RepK1) showed relatively low aa identity (17.8～25.2%) with the Rep protein coded by RCR plasmids, however. The putative double-strand origin of replication (dso) and single-strand origin of replication (sso) of pKlS-1 exhibited approximately 70% and 64% identities with those of pGI2 and pTX14-2. ORF6 and 7 showed greater than 50% similarities with alkaline serine protease, which belongs to the subtilase family. The other 2 ORFs were identified as hypothetical proteins. To determine the replicon of pKlS-1, seven subclones were contructed in the B. thuringiensis ori-negative pHTIK vector and were electroporated into a plasmid cured B. thuringiensis strain. The 1.6 kb region that included the putative ORF3 (ReplK), dso and ORF4, exhibited replication ability. These findings identified pKlS-1 as a new RCR group VII plasmid, and determined its replication region.     

Paired cloning vectors for complementation of mutations in the cyanobacterium<Emphasis Type="Italic"> Anabaena</Emphasis> sp. strain PCC 7120

The clones generated in a sequencing project represent a resource for subsequent analysis of the organism whose genome has been sequenced. We describe an interrelated group of cloning vectors that either integrate into the genome or replicate, and that enhance the utility, for developmental and other studies, of the clones used to determine the genomic sequence of the cyanobacterium, Anabaena sp. strain PCC 7120. One integrating vector is a mobilizable BAC vector that was used both to generate bridging clones and to complement transposon mutations. Upon addition of a cassette that permits mobilization and selection, pUC-based sequencing clones can also integrate into the genome and thereupon complement transposon mutations. The replicating vectors are based on cyanobacterial plasmid pDU1, whose sequence we report, and on broad-host-range plasmid RSF1010. The RSF1010- and pDU1-based vectors provide the opportunity to express different genes from either cell-type-specific or -generalist promoters, simultaneously from different plasmids in the same cyanobacterial cells. We show that pDU1 ORF4 and its upstream region play an essential role in the replication and copy number of pDU1, and that ORFs alr2887 and alr3546 (hetF _A ) of Anabaena sp. are required specifically for fixation of dinitrogen under oxic conditions.     

Characterization of a Rolling-Circle Replication Plasmid pLR1 from <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> LR1

A cryptic plasmid from Lactobacillus plantarum LR1, designated pLR1, was sequenced and characterized. It consisted of a 2066-bp circular molecule with a G + C content of 52.7%. The plasmid pLR1 was predicted to contain five putative ORFs, in which ORF1 shared 93% and 92% identity with Rep proteins of pLP1 and pC30il, members of rolling-circle replication (RCR) pC194 family. Detection of single-stranded DNA (ssDNA) intermediates by Southern hybridization and mung bean nuclease treatment confirmed that pLR1 replicated via the RCR mechanism. Accumulation of ssDNA in rifampicin-treated strains implied that the host-coded RNA polymerase was involved in the conversion of ssDNA to double-stranded DNA (dsDNA). Furthermore, the copy number of pLR1 was estimated to be 36 in each cell by real-time polymerase chain reaction.