A de novo designed N-terminal disulphide bridge stabilizes the Trichoderma reesei endo-1,4-beta-xylanase II

We have successfully engineered a disulphide bridge into the N-terminal region of Trichoderma reesei endo-1,4-beta-xylanase II (XYNII) by substituting Thr-2 and Thr-28 with cysteine. The T2C:T28C mutational changes increased the half-life in thermal inactivation of this mesophilic enzyme from approximately 40 s to approximately 20 min at 65 degrees C, and from less than 10 s to approximately 6 min at 70 degrees C. Therefore, the N-terminal disulphide bridge enables the use of XYNII at substantially higher temperatures than permitted by its native mesophilic counterpart. Altogether, thermostability increased by about 15 degrees C. The kinetic properties of the mutant XYNII were maintained at the level of the wild type enzyme. Our findings demonstrated that a properly designed disulphide bridge, here within the N-terminal region of XYNII, can be very effective in resisting thermal inactivation.     

Engineering the thermostability of<Emphasis Type="Italic"> Trichoderma reesei</Emphasis> endo-1,4-β-xylanase II by combination of disulphide bridges

Disulphide bridges were introduced in different combinations into the N-terminal region and the single -helix of mesophilic Trichoderma reesei xylanase II (TRX II). We used earlier disulphide-bridge data and designed new disulphide bridges for the combination mutants. The most stable mutant contained two disulphide bridges (between positions 2 and 28 and between positions 110 and 154, respectively) and the mutations N11D, N38E, and Q162H. With a half-life of ~56 h at 65°C, the thermostability of this sevenfold mutant was ~5,000 times higher than that of TRX II, and the half-life was 25 min even at 75°C. The thermostability of this mutant was ~30 times higher than that of the corresponding mutant missing the bridge between positions 2 and 28. The extensive stabilization at two protein regions did not alter the kinetic properties of the sevenfold mutant from that of the wild-type TRX II. The combination of disulphide bridges enhanced significantly the pH-dependent stability in a wide pH range.     

Increased alkali stability in Trichoderma reesei endo-1, 4-beta-xylanase II by site directed mutagenesis

A number of engineered Trichoderma reesei endo-beta-1,4-xylanase (Xyn II) mutants were created and activity tests were performed for increased stability. The stability of the earlier characterized mutant Y5 (T2C, T28C, K58R, +191D) was further increased by the mutations creating the constructs P9 (N97R+F93W+H144K), P12 (H144C+N92C), P15 (F180Q+H144C+N92C) and P21 (H22K+F180Q+H144C+N92C). The resistance towards thermal inactivation at alkaline pH was increased in all of the mutants. Residual activity T(50%) was increased 4-5 degrees C for P9 at pH 9. The performance of the P9 mutant in sulphate pulp bleaching was also tested and was shown to increase brightness markedly compared to the reference. The bleaching results showed the industrial potential of the obtained mutant.     

Comparison of local and global stability of an analogue of a disulfide-folding intermediate with those of the wild-type protein in bovine pancreatic ribonuclease A: identification of specific regions of stable structure along the oxidative folding pathway

We have identified specific regions of the polypeptide chain of bovine pancreatic ribonuclease A (RNase A) that are critical for stabilizing the oxidative folding intermediate des-[40-95] (with three native disulfide bonds but lacking the fourth native Cys40-Cys95 disulfide bond) in an ensemble of largely disordered three-disulfide precursors (3S if des-[40-95]). A stable analogue of des-[40-95], viz., [C40A, C95A] RNase A, which contains three out of four native disulfide pairings, was previously found to have a three-dimensional structure very similar to that of the wild-type protein. However, it is determined here from GdnHCl denaturation experiments to have significantly reduced global stability, i.e., = 4.5 kcal /mol at 20 degrees C and pH 4.6. The local stability of [C40A, C95A] RNase A was also examined using site-specific amide (2)H/(1)H exchange measurements at pD 5.0 to determine the individual unfolding free energy of specific residues under both strongly native (12 degrees C) and more destabilizing (20 degrees C) conditions. Comparison of the relative stabilities at specific amide sites of [C40A, C95A] RNase A at both temperatures with the corresponding values for the wild-type protein at 35 degrees C corroborates previous experimental evidence that unidentified intramolecular contacts in the vicinity of the preferentially formed native one-disulfide (C65-C72) loop are crucial for stabilizing early folding intermediates, leading to des-[40-95]. Moreover, values of for residues at or near the third alpha-helix, and in part of the second beta-sheet of [C40A, C95A] RNase A, indicate that these two regions of regular backbone structure contribute to stabilizing the global chain fold of the des-[40-95] disulfide-folding intermediate in the wild-type protein. More significantly, we have identified numerous specific residues in the first alpha-helix and the first beta-sheet of the protein that are stabilized in the final step of the major oxidative regeneration pathway of RNase A (des-[40-95] --> N).     

Structural basis of thermostability. Analysis of stabilizing mutations in subtilisin BPN'

The crystal structures of two thermally stabilized subtilisin BPN' variants, S63 and S88, are reported here at 1.8 and 1.9 A resolution, respectively. The micromolar affinity calcium binding site (site A) has been deleted (Delta75-83) in these variants, enabling the activity and thermostability measurements in chelating conditions. Each of the variants includes mutations known previously to increase the thermostability of calcium-independent subtilisin in addition to new stabilizing mutations. S63 has eight amino acid replacements: D41A, M50F, A73L, Q206W, Y217K, N218S, S221C, and Q271E. S63 has 75-fold greater stability than wild type subtilisin in chelating conditions (10 mm EDTA). The other variant, S88, has ten site-specific changes: Q2K, S3C, P5S, K43N, M50F, A73L, Q206C, Y217K, N218S, and Q271E. The two new cysteines form a disulfide bond, and S88 has 1000 times greater stability than wild type subtilisin in chelating conditions. Comparisons of the two new crystal structures (S63 in space group P2(1) with A cell constants 41.2, 78.1, 36.7, and beta = 114.6 degrees and S88 in space group P2(1)2(1)2(1) with cell constants 54.2, 60.4, and 82.7) with previous structures of subtilisin BPN' reveal that the principal changes are in the N-terminal region. The structural bases of the stabilization effects of the new mutations Q2K, S3C, P5S, D41A, Q206C, and Q206W are generally apparent. The effects are attributed to the new disulfide cross-link and to improved hydrophobic packing, new hydrogen bonds, and other rearrangements in the N-terminal region.     

Large increases in general stability for subtilisin BPN' through incremental changes in the free energy of unfolding

Six individual amino acid substitutions at separate positions in the tertiary structure of subtilisin BPN' (EC 3.4.21.14) were found to increase the stability of this enzyme, as judged by differential scanning calorimetry and decreased rates of thermal inactivation. These stabilizing changes, N218S, G169A, Y217K, M50F, Q206C, and N76D, were discovered through the use of five different investigative approaches: (1) random mutagenesis; (2) design of buried hydrophobic side groups; (3) design of electrostatic interactions at Ca2+ binding sites; (4) sequence homology consensus; and (5) serendipity. Individually, the six amino acid substitutions increase the delta G of unfolding between 0.3 and 1.3 kcal/mol at 58.5 degrees C. The combination of these six individual stabilizing mutations together into one subtilisin BPN' molecule was found to result in approximately independent and additive increases in the delta G of unfolding to give a net increase of 3.8 kcal/mol (58.5 degrees C). Thermodynamic stability was also shown to be related to resistance to irreversible inactivation, which included elevated temperatures (65 degrees C) or extreme alkalinity (pH 12.0). Under these denaturing conditions, the rate of inactivation of the combination variant is approximately 300 times slower than that of the wild-type subtilisin BPN'. A comparison of the 1.8-A-resolution crystal structures of mutant and wild-type enzymes revealed only independent and localized structural changes around the site of the amino acid side group substitutions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Improving the activity and stability of thermolysin by site-directed mutagenesis

In previous site-directed mutagenesis study on thermolysin, mutations which increase the catalytic activity or the thermal stability have been identified. In this study, we attempted to generate highly active and stable thermolysin by combining the mutations so far revealed to be effective. Three mutant enzymes, L144S (Leu144 in the central alpha-helix located at the bottom of the active site cleft is replaced with Ser), G8C/N60C/S65P (Gly8, Asn60, and Ser65 in the N-terminal region are replaced with Cys, Cys, and Pro, respectively, to introduce a disulfide bridge between the positions 8 and 60), and G8C/N60C/S65P/L144S, were constructed by site-directed mutagenesis. In the hydrolysis of N-[3-(2-furyl)acryloyl]-glycyl-L-leucine amide (FAGLA) and N-carbobenzoxy-L-aspartyl-L-phenylalanine methyl ester (ZDFM), the k(cat)/K(m) values of L144S and G8C/N60C/S65P/L144S were 5- to 10-fold higher than that of the wild-type enzyme. The rate constants for thermal inactivation at 70 degrees C and 80 degrees C of G8C/N60C/S65P and G8C/N60C/S65P/L144S decreased to 50% of that of the wild-type enzyme. These results indicate that G8C/N60C/S65P/L144S is more active and stable than the wild-type thermolysin. Thermodynamic analysis suggests that the single mutation of Leu144-->Ser and the triple mutation of Gly8-->Cys, Asn60-->Cys, and Ser65-->Pro are independent.     

Directed evolution converts subtilisin E into a functional equivalent of thermitase

We used directed evolution to convert Bacillus subtilis subtilisin E into an enzyme functionally equivalent to its thermophilic homolog thermitase from Thermoactinomyces vulgaris. Five generations of random mutagenesis, recombination and screening created subtilisin E 5-3H5, whose half-life at 83 degrees C (3.5 min) and temperature optimum for activity (Topt, 76 degrees C) are identical with those of thermitase. The Topt of the evolved enzyme is 17 degrees C higher and its half-life at 65 degrees C is >200 times that of wild-type subtilisin E. In addition, 5-3H5 is more active towards the hydrolysis of succinyl-Ala-Ala-Pro-Phe-p-nitroanilide than wild-type at all temperatures from 10 to 90 degrees C. Thermitase differs from subtilisin E at 157 amino acid positions. However, only eight amino acid substitutions were sufficient to convert subtilisin E into an enzyme equally thermostable. The eight substitutions, which include known stabilizing mutations (N218S, N76D) and also several not previously reported, are distributed over the surface of the enzyme. Only two (N218S, N181D) are found in thermitase. Directed evolution provides a powerful tool to unveil mechanisms of thermal adaptation and is an effective and efficient approach to increasing thermostability without compromising enzyme activity.     

An additional aromatic interaction improves the thermostability and thermophilicity of a mesophilic family 11 xylanase: structural basis and molecular study

In a general approach to the understanding of protein adaptation to high temperature, molecular models of the closely related mesophilic Streptomyces sp. S38 Xyl1 and thermophilic Thermomonospora fusca TfxA family 11 xylanases were built and compared with the three-dimensional (3D) structures of homologous enzymes. Some of the structural features identified as potential contributors to the higher thermostability of TfxA were introduced in Xyl1 by site-directed mutagenesis in an attempt to improve its thermostability and thermophilicity. A new Y11-Y16 aromatic interaction, similar to that present in TfxA and created in Xyl1 by the T11Y mutation, improved both the thermophilicity and thermostability. Indeed, the optimum activity temperature (70 vs. 60 degrees C) and the apparent Tm were increased by about 9 degrees C, and the mutant was sixfold more stable at 57 degrees C. The combined mutations A82R/F168H/N169D/delta170 potentially creating a R82-D169 salt bridge homologous to that present in TfxA improved the thermostability but not the thermophilicity. Mutations R82/D170 and S33P seemed to be slightly destabilizing and devoid of influence on the optimal activity temperature of Xyl1. Structural analysis revealed that residues Y11 and Y16 were located on beta-strands B1 and B2, respectively. This interaction should increase the stability of the N-terminal part of Xyl1. Moreover, Y11 and Y16 seem to form an aromatic continuum with five other residues forming putative subsites involved in the binding of xylan (+3, +2, +1, -1, -2). Y11 and Y16 might represent two additional binding subsites (-3, -4) and the T11Y mutation could thus improve substrate binding to the enzyme at higher temperature and thus the thermophilicity of Xyl1.     

Thermal stabilization of Bacillus subtilis family-11 xylanase by directed evolution

We used directed evolution to enhance the thermostability of glycosyl hydrolase family-11 xylanase from Bacillus subtilis. By combining random point mutagenesis, saturation mutagenesis, and DNA shuffling, a thermostable variant, Xyl(st), was identified which contained three amino acid substitutions: Q7H, N8F, and S179C. The half-inactivation temperature (the midpoint of the melting curves) for the Xyl(st) variant compared with the wild-type enzyme after incubation for 10 min was elevated from 58 to 68 degrees C. At 60 degrees C the wild-type enzyme was inactivated within 5 min, but Xyl(st) retained full activity for at least 2 h. The stabilization was accompanied by evidence of thermophilicity; that is, an increase in the optimal reaction temperature from 55 to 65 degrees C and lower activity at low temperatures and higher activity at higher temperatures relative to wild type. To elucidate the mechanism of thermal stabilization, three-dimensional structures were determined for the wild-type and Xyl(st) enzymes. A cavity was identified around Gln-7/Asn-8 in wild type that was filled with bulky, hydrophobic residues in Xyl(st). This site was not identified by previous approaches, but directed evolution identified the region as a weak point. Formation of an intermolecular disulfide bridge via Cys-179 was observed between monomers in Xyl(st). However, the stability was essentially the same in the presence and absence of a reducing agent, indicating that the increased hydrophobicity around the Cys-179 accounted for the stability.     

Introduction of a disulfide bridge enhances the thermostability of a <Emphasis Type="Italic">Streptomyces olivaceoviridis</Emphasis> xylanase mutant

Substitution of the N-terminus of Streptomyces olivaceoviridis xylanase XYNB to generate mutant TB has been previously shown to increase the thermostability of the enzyme. To further improve the stability of this mutant, we introduced a disulfide bridge (C109–C153) into the TB mutant, generating TS. To assess the effect of the disulfide bridge in the wild-type enzyme, the S109C-N153C mutation was also introduced into XYNB, resulting in XS. The mutants were expressed in Pichia pastoris, the recombinant enzymes were purified, and the effect of temperature and pH on enzymatic activity was characterized. Introduction of the disulfide bridge (C109–C153) into XYNB (XS variant) and TB (TS variant) increased the thermostability up to 2.8-fold and 12.4-fold, respectively, relative to XYNB, after incubation at 70°C, pH 6.0, for 20 min. In addition, a synergistic effect of the disulfide bridge and the N-terminus replacement was observed, which extended the half-life of XYNB from 3 to 150 min. Moreover, XS and TS displayed better resistance to acidic conditions compared with the respective enzymes that did not contain a disulfide bridge.     

Antigen stability controls antigen presentation

We investigated whether protein stability controls antigen presentation using a four disulfide-containing snake toxin and three derivatives carrying one or two mutations (L1A, L1A/H4Y, and H4Y). These mutations were anticipated to increase (H4Y) or decrease (L1A) the antigen non-covalent stabilizing interactions, H4Y being naturally and frequently observed in neurotoxins. The chemically synthesized derivatives shared similar three-dimensional structure, biological activity, and T epitope pattern. However, they displayed differential thermal unfolding capacities, ranging from 65 to 98 degrees C. Using these differentially stable derivatives, we demonstrated that antigen stability controls antigen proteolysis, antigen processing in antigen-presenting cells, T cell stimulation, and kinetics of expression of T cell determinants. Therefore, non-covalent interactions that control the unfolding capacity of an antigen are key parameters in the efficacy of antigen presentation. By affecting the stabilizing interaction network of proteins, some natural mutations may modulate the subsequent T-cell stimulation and might help microorganisms to escape the immune response.     

Substitutions at amino acid positions 143, 148, and 155 of HIV-1 integrase define distinct genetic barriers to raltegravir resistance in vivo

Mutations at amino acids 143, 148, and 155 in HIV-1 integrase (IN) define primary resistance pathways in subjects failing raltegravir (RAL)-containing treatments. Although each pathway appears to be genetically distinct, shifts in the predominant resistant virus population have been reported under continued drug pressure. To better understand this dynamic, we characterized the RAL susceptibility of 200 resistant viruses, and we performed sequential clonal analysis for selected cases. Patient viruses containing Y143R, Q148R, or Q148H mutations consistently exhibited larger reductions in RAL susceptibility than patient viruses containing N155H mutations. Sequential analyses of virus populations from three subjects revealed temporal shifts in subpopulations representing N155H, Y143R, or Q148H escape pathways. Evaluation of molecular clones isolated from different time points demonstrated that Y143R and Q148H variants exhibited larger reductions in RAL susceptibility and higher IN-mediated replication capacity (RC) than N155H variants within the same subject. Furthermore, shifts from the N155H pathway to either the Q148R or H pathway or the Y143R pathway were dependent on the amino acid substitution at position 148 and the secondary mutations in Y143R- or Q148R- or H-containing variants and correlated with reductions in RAL susceptibility and restorations in RC. Our observations in patient viruses were confirmed by analyzing site-directed mutations. In summary, viruses that acquire mutations defining the 143 or 148 escape pathways are less susceptible to RAL and exhibit greater RC than viruses containing 155 pathway mutations. These selective pressures result in the displacement of N155H variants by 143 or 148 variants under continued drug exposure.     

Thermodynamic analysis of the contributions of the copper ion and the disulfide bridge to azurin stability: synergism among multiple depletions

The stabilizing potential of the copper ion and the disulfide bridge in azurin has been explored with the aim of inspecting the ways in which these two factors influence one another. Specifically, whether copper and disulfide contributions to protein stability are additive has been examined. To this aim, the thermal unfolding of a copper-depleted mutant lacking the disulfide bridge between Cys3 and Cys26 (apo C3A/C26A azurin) was studied by differential scanning calorimetry. A comparison of the unfolding parameters of holo and apo C3A/C26A azurin with the apo C3A/C26A protein has shown that the effects of simultaneous copper and disulfide depletion are additive only at two temperatures: T=15 degrees C and T=67 degrees C. Within this range the presence of the copper ion and the disulfide bridge has a positive synergistic effect on azurin stability. These findings might have implications for the rational use of the stabilizing potential of copper and disulfides in copper protein engineering.     

Stabilization of a tetrameric malate dehydrogenase by introduction of a disulfide bridge at the dimer-dimer interface

Malate dehydrogenase (MDH) from the moderately thermophilic bacterium Chloroflexus aurantiacus (CaMDH) is a tetrameric enzyme, while MDHs from mesophilic organisms usually are dimers. To investigate the potential contribution of the extra dimer-dimer interface in CaMDH with respect to thermal stability, we have engineered an intersubunit disulfide bridge designed to strengthen dimer-dimer interactions. The resulting mutant (T187C, containing two 187-187 disulfide bridges in the tetramer) showed a 200-fold increase in half-life at 75 degrees C and an increase of 15 deg. C in apparent melting temperature compared to the wild-type. The crystal structure of the mutant (solved at 1.75 A resolution) was essentially identical with that of the wild-type, with the exception of the added inter-dimer disulfide bridge and the loss of an aromatic intra-dimer contact. Remarkably, the mutant and the wild-type had similar temperature optima and activities at their temperature optima, thus providing a clear case of uncoupling of thermal stability and thermoactivity. The results show that tetramerization may contribute to MDH stability to an extent that depends strongly on the number of stabilizing interactions in the dimer-dimer interface.     

A stable disulfide-free gene-3-protein of phage fd generated by in vitro evolution

Disulfide bonds provide major contributions to the conformational stability of proteins, and their cleavage often leads to unfolding. The gene-3-protein of the filamentous phage fd contains two disulfides in its N1 domain and one in its N2 domain, and these three disulfide bonds are essential for the stability of this protein. Here, we employed in vitro evolution to generate a disulfide-free variant of the N1-N2 protein with a high conformational stability. The gene-3-protein is essential for the phage infectivity, and we exploited this requirement for a proteolytic selection of stabilized protein variants from phage libraries. First, optimal replacements for individual disulfide bonds were identified in libraries, in which the corresponding cysteine codons were randomized. Then stabilizing amino acid replacements at non-cysteine positions were selected from libraries that were created by error-prone PCR. This stepwise procedure led to variants of N1-N2 that are devoid of all three disulfide bonds but stable and functional. The best variant without disulfide bonds showed a much higher conformational stability than the disulfide-containing wild-type form of the gene-3-protein. Despite the loss of all three disulfide bonds, the midpoints of the thermal transitions were increased from 48.5 degrees C to 67.0 degrees C for the N2 domain and from 60.0 degrees C to 78.7 degrees C for the N1 domain. The major loss in conformational stability caused by the removal of the disulfides was thus over-compensated by strongly improved non-covalent interactions. The stabilized variants were less infectious than the wild-type protein, probably because the domain mobility was reduced. Only a small fraction of the sequence space could be accessed by using libraries created by error-prone PCR, but still many strongly stabilized variants could be identified. This is encouraging and indicates that proteins can be stabilized by mutations in many different ways.     

Improvement of oxidative and thermostability of N-carbamyl-d-amino Acid amidohydrolase by directed evolution

N-Carbamyl-D-amino acid amidohydrolase (N-carbamoylase), which is currently employed in the industrial production of unnatural D-amino acid in conjunction with D-hydantoinase, has low oxidative and thermostability. We attempted the simultaneous improvement of the oxidative and thermostability of N-carbamoylase from Agrobacterium tumefaciens NRRL B11291 by directed evolution using DNA shuffling. In a second generation of evolution, the best mutant 2S3 with improved oxidative and thermostability was selected, purified and characterized. The temperature at which 50% of the initial activity remains after incubation for 30 min was 73 degrees C for 2S3, whereas it was 61 degrees C for wild-type enzyme. Treatment of wild-type enzyme with 0.2 mM hydrogen peroxide for 30 min at 25 degrees C resulted in a complete loss of activity, but 2S3 retained about 79% of the initial activity under the same conditions. The K(m) value of 2S3 was estimated to be similar to that of wild-type enzyme; however k(cat) was decreased, leading to a slightly reduced value of k(cat)/K(m), compared with wild-type enzyme. DNA sequence analysis revealed that six amino acid residues were changed in 2S3 and substitutions included Q23L, V40A, H58Y, G75S, M184L and T262A. The stabilizing effects of each amino acid residue were investigated by incorporating mutations individually into wild-type enzyme. Q23L, H58Y, M184L and T262A were found to enhance both oxidative and thermostability of the enzyme and of them, T262A showed the most significant effect. V40A and G75S gave rise to an increase only in oxidative stability. The positions of the mutated amino acid residues were identified in the structure of N-carbamoylase from Agrobacterium sp. KNK 712 and structural analysis of the stabilizing effects of each amino acid substitution was also carried out.     

Biochemical and structural characterization of TLXI, the Triticum aestivum L. thaumatin-like xylanase inhibitor

Thaumatin-like xylanase inhibitors (TLXI) are recently discovered wheat proteins. They belong to the family of the thaumatin-like proteins and inhibit glycoside hydrolase family 11 endoxylanases commonly used in different cereal based (bio)technological processes. We here report on the biochemical characterisation of TLXI. Its inhibition activity is temperature- and pH-dependent and shows a maximum at approximately 40 degrees C and pH 5.0. The TLXI structure model, generated with the crystal structure of thaumatin as template, shows the occurrence of five disulfide bridges and three beta-sheets. Much as in the structures of other short-chain thaumatin-like proteins, no alpha-helix is present. The circular dichroism spectrum of TLXI confirms the absence of alpha-helices and the presence of antiparallel beta-sheets. All ten cysteine residues in TLXI are involved in disulfide bridges. TLXI is stable for at least 120 min between pH 1-12 and for at least 2 hours at 100 degrees C, making it much more stable than the other two xylanase inhibitors from wheat, i.e. Triticum aestivum xylanase inhibitor (TAXI) and xylanase inhibitor protein (XIP). This high stability can probably be ascribed to the high number of disulfide bridges, much as seen for other thaumatin-like proteins.     

Novel alkaline- and heat-stable serine proteases from alkalophilic Bacillus sp. strain GX6638.

An alkalophilic Bacillus sp., strain GX6638 (ATCC 53278), was isolated from soil and shown to produce a minimum of three alkaline proteases. The proteases were purified by ion-exchange chromatography and were distinguishable by their isoelectric point, molecular weight, and electrophoretic mobility. Two of the proteases, AS and HS, which exhibited the greatest alkaline and thermal stability, were characterized further. Protease HS had an apparent molecular weight of 36,000 and an isoelectric point of approximately 4.2, whereas protease AS had a molecular weight of 27,500 and an isoelectric point of 5.2. Both enzymes had optimal proteolytic activities over a broad pH range (pH 8 to 12) and exhibited temperature optima of 65 degrees C. Proteases HS and AS were further distinguished by their proteolytic activities, esterolytic activities, sensitivity to inhibitors, and their alkaline and thermal stability properties. Protease AS was extremely alkali stable, retaining 88% of initial activity at pH 12 over a 24-h incubation period at 25 degrees C; protease HS exhibited similar alkaline stability properties to pH 11. In addition, protease HS had exceptional thermal stability properties. At pH 9.5 (0.1 M CAPS buffer, 5 mM EDTA), the enzyme had a half-life of more than 200 min at 50 degrees C and 25 min at 60 degrees C. At pH above 9.5, protease HS readily lost enzymatic activity even in the presence of exogenously supplied Ca2+. In contrast, protease AS was more stable at pH above 9.5, and Ca2+ addition extended the half-life of the enzyme 10-fold at 60 degrees C. In contrast, protease AS was more stable at pH above 9.5, and Ca2+ addition extended the half-life of the enzyme 10-fold at 60 degrees C. The data presented here clearly indicate that these two alkaline proteases from Bacillus sp. strain GX6638 represent novel proteases that differ fundamentally from the proteases previously described for members of the genus Bacillus.     

Thermal stability of pyrrolidone carboxyl peptidases from the hyperthermophilic Archaeon, Pyrococcus furiosus.

The temperature adaptation of pyrrolidone carboxyl peptidase (PCP) from a hyperthermophile, Pyrococcus furiosus (Pf PCP), was characterized in the context of an assembly form of the protein which is a homotetramer at neutral pH. The Pf PCP exhibited maximal catalytic activity at 90-95 degrees C and its activity was higher in the temperature range 30-100 degrees C than its counterpart from the mesophilic Bacillus amyloliquefaciens (BaPCP). Thermal stability was monitored by differential scanning calorimetry (DSC). Two clearly separated peaks appeared on the DSC curves for Pf PCP at alkaline and acidic pH. Using the oxidized Pf PCP and two mutant proteins (Pf C188S and Pf C142/188S), it was found that the peaks on the high and low temperature sides of the DSC curve of Pf PCP were produced by the forms with an intersubunit disulfide bridge between the two subunits and without the bridge, respectively, indicating the stabilization effect of intersubunit disulfide bridges. The denaturation temperature (Td) of Pf PCP with intersubunit disulfide bridges was higher by 53 degrees C at pH 9.0 than that of BaPCP. An analysis of the equilibrium ultracentrifugation patterns showed that the tetrameric Pf C142/188S dissociated into dimers with decreasing pH in the acidic region and became monomer subunits at pH 2.5. The heat denaturation of Pf PCP and its two Cys mutants was highly reversible in the dimeric forms, but completely irreversible in the tetrameric form. The Td of Pf C142/188S decreased as the enzyme became dissociated, but the monomeric form of the protein was still folded at pH 2.5, although BaPCP was completely denatured at acidic pH. These results indicate that subunit interaction plays an important role in stabilizing PCP from P. furiosus in addition to the intrinsic enhanced stability of its monomer.