HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY OF PHYTOPLANKTON PIGMENTS USING A POLYMERIC REVERSED-PHASE C18 COLUMN1

A high-performance liquid chromatographic (HPLC) method is described that allows improved resolution of several chemotaxonomically significant phytoplankton pigments. The protocol, which employs two pumps and a modified Mantoura and Llewellyn (1983) solvent system, can be easily adapted for many HPLC systems currently in use. The most unique aspect of the method is the use of a polymeric C₁₈ reversed phase HPLC column (VYDAC 201TP). In comparison to the monomeric C₁₈ columns typically used in the characterization of phytoplankton pigments, polymeric C₁₈ columns offer superior selectivity for structurally similar compounds. The protocol was evaluated for the ability to resolve most of the phytoplankton pigments of diagnostic importance using algal cultures from nine classes. Pigment pairs that were resolved by the method include a) lutein and zeaxanthin, b) neoxanthin and 19′-hexanoyloxyfucoxanthin, and c) α-carotene and β-carotene, and partial resolution of chlorophyll c₁ and chlorophyll c₂.     

Quantitative analysis of retinoids in biological fluids by high-performance liquid chromatography using column switching : I. Determination of isotretinoin and tretinoin and their 4-oxo metabolites in plasma

A fully automated gradient high-performance liquid chromatographic method for the determination of isotretinoin, tretinoin and their 4-oxo metabolites in plasma was developed, using the column-switching technique. After dilution with an internal standard solution containing 20% acetonitrile, 0.5 ml of the sample was injected onto a precolumn (17x4.6 mm I.D.), filled with C₁₈ Corasil 37–53 μm. Proteins and polar plasma components were washed out using 1% ammonium acetate-acetonitrile (9:1, v/v) as mobile phase 1. After valve switching, the retained components were transferred to the analytical column in the backflush mode, separated by gradient elution and detected at 360 nm by UV detection. Using two coupled reversed-phase columns (125 mm long), the separation of cis and trans isomers was possible, and all four compounds could be quantified down to 2 ng/ml of plasma. The inter-assay precision in the concentration range 20-1000 ng/ml was between 1.0 and 4.7% for all compounds.     

An optimized and validated RP-HPLC/UV detection method for simultaneous determination of all-trans-Retinol (Vitamin A) and α-Tocopherol (Vitamin E) in human serum: Comparison of different particulate reversed-phase HPLC columns

A novel, simple and fast reversed-phase HPLC/UV method was developed, optimized for various chromatographic conditions, and validated according to international guidelines for simultaneous determination of all-trans-retinol and α-tocopherol in human serum using retinyl acetate as internal standard in the concentration of 0.5 μg/ml. A liquid-phase extraction was applied to the 250 μl of serum with n-hexane–dichloromethane mixture (70:30, v/v), in two steps, using ethanol–methanol mixture (95:5, v/v) for protein precipitation and BHT (butylated hydroxy toluene) as stabilizer for sample preparation. Both analytes were analyzed on Kromasil 100 C₁₈ column (150 mm × 4.6 mm, 5 μm), Brownlee analytical (Perkin Elmer) C₁₈ column (150 mm × 4.6 mm, 5 μm), and Supelco (Supelcosil) LC-18 column (150 mm × 3 mm, 3 μm), protected by a Perkin Elmer C₁₈ (30 mm × 4.6 mm, 10 μm; Norwalk, USA) pre-column guard cartridge, at 292 nm wavelength, using methanol–water (99:1, v/v), in isocratic mode as mobile phase applied at flow rate of 1.5 ml/min and 1 ml/min for both 5 μm and 3 μm columns, respectively. Complete separation of all the analytes was achieved in 3 and 6 min on 3 μm and 5 μm columns, respectively by injecting 20 μl of sample into the HPLC system by autosampler, keeping column oven temperature at 25 °C. Different particulate reversed-phase chromatographic columns were evaluated in order to select the best column in terms of sensitivity, selectivity, resolution and short run time of both the analytes and it was concluded that 3 μm columns are better to be used in clinical set up as well as in laboratories for the separation of these analytes in a shorter time as compared with 5 μm columns. The method was validated and applied for the analysis of all-trans-retinol and α-tocopherol in the serum of human volunteers.     

A nitromethane‐based HPLC system alternative to acetonitrile for carotenoid analysis of fruit and vegetables

Acetonitrile‐based HPLC systems are the most commonly used for carotenoid analysis from different plant tissues. Because of the acetonitrile shortage, an HPLC system for the separation of carotenoids on C₁₈ reversed‐phase columns was developed in which an acetonitrile–alcohol‐based mobile phase was replaced by nitromethane. This solvent comes closest to acetonitrile with respect to its elutrophic property. Our criterion was to obtain similar separation and retention times for a range of differently structured carotenoids. This was achieved by further increase in the lipophilicity with ethylacetate. For all the carotenoids which we tested, we found co‐elution only of β‐cryptoxanthin and lycopene. By addition of 1% of water, separation of this pair of carotenoids was also achieved. The final recommended mobile phase consisted of nitromethane : 2‐propanol : ethyl acetate : water (79 : 10 : 10 : 1, by volume). On Nucleosil C₁₈ columns and related ones like Hypersil C₁₈, we obtained separation of carotenes, hydroxyl, epoxy and keto derivatives, which resembles the excellent separation properties of acetonitrile‐based mobile phases on C₁₈ reversed phase columns. We successfully applied the newly developed HPLC system to the separation of carotenoids from different vegetables and fruit. Copyright © 2010 John Wiley & Sons, Ltd.     

Reversed-phase high-performance liquid chromatography of radioiodinated salmon calcitonins

Reversed-phase HPLC conditions for simultaneous separation of salmon calcitonin, mono- and di-radioiodinated salmon calcitonins and their tryptic digested fragments have been developed. Salmon calcitonin was radioiodinated with Na¹²⁵I by the iodo-beads method. After solid-phase extraction from the reaction mixtures using C₁₈ Bond Elut cartridges, mono- and di-radioiodinated salmon calcitonins were separated from each other, as well as from unlabeled salmon calcitonin, on a Bondclone 10 C₁₈ column (300×7.8 mm I.D.) by isocratic elution with 0.1% trifluoroacetic acid in 34% aqueous acetonitrile. The characteristics of either iodinated peptides or unlabeled salmon calcitonin were evaluated on the basis of UV absorbance (215 and 280 nm), fluorescence (λ_ex=282 nm, λ_em=310 nm) and measurement of specific radioactivity by means of a flow-through radio-isotope detector. HPLC separation of a tryptic digest of iodinated salmon calcitonin fraction on a W-porex 5 C₁₈ 300 Å column (250×4.6 mm I.D.) and subsequent amino acid analysis, led to the conclusion that radioiodination took place at the Tyr residue and not at the His moiety.     

High-performance liquid chromatographic assay with fluorescence detection for the determination of cephaeline and emetine in human plasma and urine

A high-performance liquid chromatographic assay method for the quantitation of ipecac alkaloids (cephaeline and emetine) in human plasma and urine is described. Human plasma or urine was extracted with diethylether under alkaline conditions following the addition of an internal standard. Concentrations of alkaloids and internal standard were determined by octadecylsilica chromatographic separation (Symmetry C₁₈ columns, plasma analysis; 15 cm×4.6 mm I.D., 5 μm particle size, urine analysis; 7.5 cm×4.6 mm I.D., 5 μm particle size). The mobile phase consisted of buffer (20 mmol/l 1-heptanesulfonic acid sodium salt, adjusted to pH 4.0 with acetic acid)–methanol (51:49, v/v). Eluate fluorescence was monitored at 285/316 nm. The lowest quantitation limits of cephaeline and emetine were 1 and 2.5 ng/ml, respectively, in plasma, and 5 ng/ml in urine. Intra- and inter-day relative standard deviations were below 15%. The assay is sensitive, specific and applicable to pharmacokinetic studies in humans.     

Simultaneous determination of twelve benzodiazepines in human serum using a new reversed-phase chromatographic column on a 2-μm porous microspherical silica gel

A high-performance liquid chromatographic method has been developed for the simultaneous analysis of twelve frequently used benzodiazepines (BZPs) (bromazepam, clonazepam, chlordiazepoxide, estazolam, etizolam, flutazoram, haloxazolam, lorazepam, nitrazepam, oxazolam, triazolam and diazepam, internal standard) by using commerically available 2 or 5 μm particle size reversed-phase columns and a microflow cell-equipped ultraviolet detector. The separation was achieved using a C₁₈ reversed-phase column (condition 1: 100×4.6 mm I.D., particle size 2 μm, TSK gel Super-ODS; condition 2: 100×4.6 mm I.D., particle size 5 μm, Hypersil ODS-C₁₈). The mobile phase was composed of methanol-5 mM NaH₂PO₄ (pH 6) (45:55, v/v), and the flow-rate was 0.65 ml/min (conditions 1 and 2). The absorbance of the eluent was monitored at 254 nm. Retention times under condition 1 were shorter than those of condition 2. When the twelve benzodiazepines were determined, sensitivity and limits of quantification were about four to ten times better under condition 1 than under condition 2. The rate of recovery and linearity in condition 1 were approximately the same as those in condition 2. These results show that a new ODS filler with a particle size of 2 μm was more sensitive, provided better separation and was more rapid than that with conventional ODS filler.     

Rapid and sensitive high-performance liquid chromatographic method for busulfan assay in plasma

A reversed-phase liquid chromatographic method with ultraviolet detection has been developed to determine busulfan concentrations in plasma of children undergoing bone marrow transplantation. Plasma samples (200 μl) containing busulfan and 1,6-bis(methanesulfonyloxy)hexane as an internal standard were prepared by a simple derivatization method with diethyldithiocarbamate followed by extraction with ethyl acetate and solid-phase purification on C₈ columns conditioned with methanol and water and eluted with acetonitrile (recovery 99%). Chromatography was accomplished using a Hypersil octadecylsilyl column (10 cm×4.6 mm I.D.) and a mobile phase of acetonitrile, tetrahydrofuran and distilled water (65:5:30, v/v). The limit of detection was 25 ng/ml (signal-to-noise ratio of 5). Calibration curves were linear up to 25 000 ng/ml. Intra-day and inter-day coefficients of variation of the assay were ≤5%. This method was used to analyse busulfan plasma concentrations after oral administration within the framework of therapeutic drug monitoring and pharmacokinetic studies in children.     

Simultaneous determination of the lactone and carboxylate forms of the camptothecin derivative CPT-11 and its metabolite SN-38 in plasma by high-performance liquid chromatography

CPT-11 (irinotecan) and mainly its metabolite SN-38 are potent antitumor derivatives of camptothecin. As the active lactone forms of both CPT-11 and SN-38 exist in pH-dependent equilibrium with their respective less potent open-ring hydroxy acid species, the simultaneous monitoring of both forms of both compounds is relevant. CPT-11 and SN-38 derivatives have quite different fluorescence responses. In order to avoid any compromise on the wavelength setting, we developed chromatographic conditions allowing simple automated wavelength setting changes which have been prevented using existing methods involving conventional C₁₈ columns. This was achieved by means of a Symmetry C₁₈ column combined to a gradient elution program using acetonitrile and 75 mM ammonium acetate plus 7.5 mM tetrabutylammonium bromide at pH 6.4. The developed conditions allowed an elution order suitable for a simple automated wavelength change in respect to reliable peak integration. CPT-11 and SN-38 derivatives were detected at λ_ex=362 nm/λ_em=425 nm and λ_ex=375 nm/λ_em=560 nm, respectively. The developed method allowed the detection of amounts less than 3 pg of each derivative injected on column. The method was successfully applied to pharmacokinetic and toxicokinetic studies in rat and dog.     

Simultaneous determination of the peptide-mitomycin KW-2149 and its metabolites in plasma by high-performance liquid chromatography

A gradient high-performance liquid chromatographic (HPLC) method is described for the quantification of KW-2149 and its two major metabolites in plasma. The method involves a sample clean-up by solid-phase extraction on C₁₈ columns, separation of the respective compounds by HPLC on a YMC ODS-AQ column (5-μm particle size, 150×6 mm I.D.), using a methanol–water gradient system as an eluent, and measurement by UV absorbance detection at 375 nm. The limits of quantitation were 10 ng/ml for KW-2149 and M-16, and 15 ng/ml for M-18. Recoveries from plasma were higher than 92% on C₁₈ extraction columns. Intra-day precision, expressed as %C.V., was between 1.4 and 6.5%. Intra-day accuracy ranged from 94 to 107%. Precision and accuracy of variability of inter-assays increased somewhat; however, were still within acceptable ranges. The ability of the method to quantify KW-2149 and two major metabolites simultaneously, with precision, accuracy and sensitivity, make it useful in monitoring the fate of this new mitomycin in cancer patients.     

Effective reversed-phase ion pair high-performance liquid chromatography method for the separation and characterization of intact low-molecular-weight heparins

A simple, selective, and efficient reversed-phase ion pair high-performance liquid chromatography (RPIP-HPLC) method was developed for the separation of various commercially available intact low-molecular-weight heparins (LMWHs). The developed method uses a C₁₈ column (150 × 4.6 mm) with diode array detection at 230 nm, flow rate at 1.0 ml/min, and a mobile phase containing acetonitrile/water (32:68%), tetrabutylammonium hydroxide (15 mM), and ammonium acetate (50 mM) at pH 7.0. The performance of this method was assessed in terms of selectivity, linearity, intra- and interday precision, and accuracy. The novel application of RPIP-HPLC with evaporative light scattering detection (ELSD) for the analysis of intact LMWHs was demonstrated. Intact LMWHs were analyzed with superior resolution and peak shape. Different chromatographic profiles were obtained for different LMWHs showing significant structural diversity. This method clearly showed chemical changes that occurred to LMWH under the stress condition. This method can be applied for the separation, identification, characterization, and pharmaceutical stability analysis of various LMWHs.     

Separation of some mono-, di- and tri-unsaturated fatty acids containing 18 carbon atoms by high-performance liquid chromatography and photodiode array detection

Positional and geometric isomers of mono-, di- and tri-unsaturated fatty acids containing 18 carbon atoms were separated on commercially available reversed-phase columns in gradient systems composed of acetonitrile and water, utilizing photodiode array detection. The biological samples were hydrolyzed with 2 M NaOH for 35–40 min at 85–90°C. After cooling, the hydrolysates were acidified with 4 M HCl and the free fatty acids were extracted with dichloromethane. The organic solvent was removed in a gentle stream of argon. The fatty acids were determined after pre-column derivatization with dibromacetophenone in the presence of triethylamine. The reaction components were mixed and reacted for 2 h at 50°C. Separations of derivatized fatty acids were performed on two C₁₈ columns (Nova Pak C₁₈, 4 μm, 250×4.6 mm, Waters) by binary or ternate gradient programs and UV detection at 254 and 235 nm. The geometric and positional isomers of some unsaturated fatty acids were substantially retained on the C₁₈ columns and were distinct from some saturated fatty acids, endogenous substances in biological samples or background interference. Only slight separation of critical pairs of cis-9 C_18:1/cis-11 C_18:1 and cis-6 C_18:1/trans-11 C_18:1 was obtained. A ternate gradient program can be used for complete fractionation of a mixture of conjugated linoleic acid isomers (CLA) from cis-9, cis-12 and trans-9, trans-12 isomers of C_18:2. The CLA isomers in the effluent were monitored at 235 nm. The CLA isomers were differentiated from saturated and unsaturated fatty acids using a photodiode array detector. The utility of the method was demonstrated by evaluating the fatty acid composition of duodenal digesta, rapeseed and maize oils.     

Forensic analysis of eleven cyclic antidepressants in human biological samples using a new reversed-phase chromatographic column of 2 μm porous microspherical silica gel

A high-performance liquid chromatographic method has been developed for the forensic analysis of eleven frequently used cyclic antidepressant drugs (ADSs) (amitriptyline, amoxapine, clomipramine, desipramine, dosulepine, doxepin, imipramine, maprotiline, melitracen, mianserine and nortriptyline) using a recently developed reversed-phase column with 2 μm particles for the analysis of biological samples. The separation was carried out using two different C₈ reversed-phase columns (column 1: 100 mm × 4.6 mm I.D., particle size 2 μm, TSK gel Super-Octyl; column 2: 100 mm × 4.6 mm I.D., particle size 5 μm, Hypersil MOS-C₈) for comparison. The mobile phase was composed of methanol-20 mM KH₂PO₄ (pH 7) (60:40, v/v) and the flow-rate was 0.6 ml/min for both columns. The absorbance of the eluent was monitored at 254 nm. When the eleven drugs were determined, the sensitivity with the 2 μm particles was about five times greater than with the 5 μm particles. Retention times on column 1 were shorter than those on column 2. These results show that the new ODS column packing with a particle size of 2 μm gives higher sensitivity and a shorter analysis time than the conventional ODS column packing when applied to the analysis of biological samples.     

Derivatization and high-performance liquid chromatographic analysis of pentaazapentacosane pentahydrochloride

A rapid high-performance liquid chromatographic method for determination of the dansyl derivative of pentaazapentacosane (PAPC) pentahydrochloride has been developed. The chromatographic system uses a reversed-phase C₈ column, a mobile phase of acetic acid buffer and acetonitrile and UV detection. The dansylation conditions were optimized with a pH of 11.0 and a 20-fold dansyl chloride excess. The yield of dansyl PAPC increased 10-fold as the reaction pH was changed from 9.5 to 10.5. Under derivatization conditions of pH 8.5–11.0 and 1–30-fold excess dansyl chloride only perdansyl PAPC was found.     

Determination of a HIV protease inhibitor (DMP 450) in animal and human plasma by solid-phase extraction and high-performance liquid chromatography

Extraction of DMP 450 from plasma was performed with C₂ solid-phase extraction columns, using 0.1 M ammonium acetate in 90% methanol to elute DMP 450. The extraction recovery over the range of 10 to 10 000 ng/ml averaged 81.0, 96.2, 77.4, 95.2 and 68.0% from rat, dog, monkey, chimpanzee (25–10 000 ng/ml) and human plasma, respectively. HPLC analysis was carried out with a C₁₈ column and a mobile phase of acetonitrile, methanol and 30 mM potassium phosphate (pH 3), the composition dependent on the type of plasma being analyzed, and monitored at a wavelength of 229 nm. Intra-day and inter-day coefficients of variation were less than 9.9 and 12.9%, respectively. Absolute differences were less than 11.5%.     

Determination of dicentrine in rat plasma by high-performance liquid chromatography and its application to pharmacokinetics

A simple high-performance liquid chromatographic method was developed to study the pharmacokinetics of dicentrine in rat plasma after 10 mg/kg intravenous administration. After addition of an internal standard (coumarin), plasma was deproteinized by acetonitrile for sample clean-up. The drugs were separated on a reversed-phase Nucleosil C₁₈ column (250 × 4 mm I.D., particle size 5 μm) and detected by photodiode-array detection at a wavelength of 308 nm. Acetonitrile-water (35:65, v/v, pH 2.5–2.8, adjusted with orthophosphoric acid) was used as the mobile phase. A biphasic phenomenon with a rapid distribution followed by a slower elimination phase was observed from the plasma concentration-time curve.     

Determination of piribedil and its basic metabolites in plasma by high-performance liquid chromatography

A high-performance liquid chromatographic method for the determination of piribedil and its p-hydroxylated, catechol and N-oxide metabolites in plasma is described. After addition of an internal standard (buspirone), the plasma samples were subjected to a three-step extraction procedure. The final extracts were evaporated to dryness under nitrogen, and the residues were reconstituted in 100 μl of mobile phase (0.01 M phosphate buffer—acetonitrile, 50:50, v/v) and chromatographed by acetonitrile gradient elution on a C₁₈ reversed-phase column coupled to an ultraviolet detector set at 240 nm. The method was selective for piribedil and its metabolites, and sufficiently sensitive and precise for studies aimed at elucidating the role of the metabolites in the parent drug's pharmacological effects.     

A simple and efficient frit preparation method for one‐end tapered‐fused silica‐packed capillary columns in nano‐LC‐ESI MS

A novel frit preparation method for one‐end tapered‐fused silica‐packed capillary columns in nano‐LC‐ESI MS was developed. A hollow‐fused silica capillary column with a tapered tip as nano‐spray emitter was filled with 5 μm C₁₈ beads, and then a sintered frit about 0.25 mm in length was prepared at the tip by butane flame. A stainless steel protection tube with 0.5 mm id was used to control the length of the frit and to protect the packed C₁₈ beads behind the sintered frit during the sintering. C₁₈ sintered frits were evaluated by BSA tryptic digests with nano‐LC‐LTQ. The sintered frits did not produce post‐column band broadening due to very small volume (about 0.2 nL) and did not produce adsorption to sample. The sintered frit columns had good separation reproducibility and separation performance compared with self‐assembled particles frit columns and commercial columns.     

The use of principal component analysis for the modelling of high performance liquid chromatography

Principal component analysis (PCA) was used to analyse the behaviour of a chromatographic separation as its scale increased. Three 4.6 mm diameter columns identical in every respect except for column length (25, 15 and 5 cm), were used to generate the data from a test system based on the reversed-phase HPLC separation of crude erythromycin on a polystyrene matrix (PLRP 1000) having a particle diameter of 8 mu;m and a pore diameter of 100 nm. The species were separated with an isocratic solvent composed of 45/55 acetonitrile/water at about pH 7. An experimental design technique was used to investigate the effects of four process variables (load volume, load concentration, temperature and pH of buffer) on the chromatogram shapes. Following appropriate pre-processing of the chromatographic data, subsets of critical chromatograms were selected which sufficiently characterised the entire data set. From this subset, the corresponding runs were performed on the different sized columns and principal component models were generated for each. At 5 and 15 cm a single principal component was sufficient to characterise all the variance in the chromatograms which the range of process variables introduced, but at 25 cm two principal components were required, particularly to characterise the chromatograms with small loads. Excellent correlations were observed between the first principal components at the three scales. The possibility of predicting the separations on the 25 cm column from an analysis of the separations observed at 5 cm was investigated. The study revealed that good predictions could be made at high loads (>92%) , but the model was not effective at low loads because of the need to incorporate a second principal component which was not defined by the range of variables applied to the 5 cm column.     

Chiral 3D Open‐Framework Material Ni(D‐cam)(H2O)2 Used as GC Stationary Phase

Metal‐organic frameworks (MOFs) have been explored for analytical applications because of their outstanding properties such as high surface areas, flexibility and specific structure features, especially for chromatography application in recent years. In this work, a chiral MOF Ni(D‐cam)(H₂O)₂ with unusual integration of molecular chirality, absolute helicity, and 3‐D intrinsic chiral net was chosen as stationary phase to prepare Ni(D‐cam)(H₂O)₂‐coated open tubular columns for high‐resolution gas chromatographic (GC) separation. Two fused‐silica open tubular columns with different inner diameters and lengths, including column A (30 m × 250 µm i.d.) and column B (2 m × 75 µm i.d.), were prepared via a dynamic coating method. The chromatographic properties of the two columns were investigated using n‐dodecane as the analyte at 120 °C. The number of theoretical plates (plates/m) of the two metal–organic framework (MOF) columns was 1300 and 2750, respectively. The racemates, isomer and linear alkanes mixture were used as analytes for evaluating the separation properties of Ni(D‐cam)(H₂O)₂‐coated open tubular columns. The results showed that the columns offered good separations of isomer and linear alkanes mixture, especially racemates. Chirality 26:27–32, 2013. © 2013 Wiley Periodicals, Inc.