Purification and characterization of pectin lyase secreted by <Emphasis Type="Italic">Penicillium citrinum</Emphasis>

The importance of various parameters such as sugarcane juice concentration, pH of the medium, and effects of different solid supports for maximum secretion of pectin lyase from Penicillium citrinum MTCC 8897 has been studied. The enzyme was purified to homogeneity by Sephadex G-100 and DEAE-cellulose chromatography. The molecular mass determined by SDS-PAGE was 31 kDa. The K _m and k _cat values were found to be 1 mg/ml and 76 sec⁻¹, respectively. The optimum pH of the purified pectin lyase was 9.0, though it retains activity in the pH 9.0–12.0 range when exposed for 24 h. The optimum temperature was 50°C, and the pectin lyase was found to be completely stable up to 40°C when exposed for 1 h. The purified pectin lyase was found efficient in retting of Linum usitatissimum, Cannabis sativa, and Crotalaria juncea. Published in Russian in Biokhimiya, 2009, Vol. 74, No. 7, pp. 985–992.     

Overexpression of the <Emphasis Type="Italic">plg</Emphasis>1 gene encoding pectin lyase in <Emphasis Type="Italic">Penicillium griseoroseum</Emphasis>

The pectin lyase (PL) is an industrially important enzyme since it is used for maceration and clarification in the process of fruit juice production in food industries. In order to increase the yields of pectin lyase we cloned the plg1 (pectin lyase 1) from Penicillium griseoroseum gene under the control of the strong constitutive promoter of the glyceraldehyde-3-phosphate dehydrogenase gene (gpdA) and the terminator region of the tryptophan synthetase (trpC) gene from Aspergillus nidulans (plasmid pAN52-Plg1) and transformed this construct into the P. griseoroseum strain PG63. One of the pAN52-Plg1 multi-copy transformants (strain 105) grown in culture medium containing glucose or sugar cane juice showed PL activities of 4,804 or 5,202 U ml⁻¹ respectively, which represented 57- and 132-fold increases. In addition, the apparent specific activity of PL produced by this strain was much higher than the one observed for a commercial pectinase preparation. Evaluation of the extracellular proteins in the culture supernatant of strain 105 by SDS-PAGE showed the presence of a clear and strong band of approximately 40 kDa that probably corresponds to PL. The enzyme yields reported here demonstrate that the system we developed is able to express pectin lyase at levels comparable to, or exceeding, previously reported data.     

Molecular cloning,sequence analysis,expression and characterization of the endochitinase gene from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21

The endochitinase DNA and cDNA from Trichoderma sp. were cloned, sequenced and expressed. The cloned DNA and cDNA sequences were 1,476 and 1,275 bp in length, respectively. There were three introns in DNA sequence in comparison with the cDNA sequence. The endochitinase protein contained three regions: the signal peptide, the prepro-region and the mature protein region. The gene fragment encoding the mature endochitinase was ligated into the expression vector pET-28a+, yielding pET-1. The plasmid pET-1 was transformed into the Escherichia coli BL21 (DE3). The clone bearing pET-1 was picked and cultured at 30°C for the expression of endochitinase. SDS-PAGE analysis showed that the endochitinase was expressed in the periplasmic space and the purified protein showed a single band. The activity of 70.2 U/mg was obtained from the cellular extract of the recombinant strain. The activity of endochitinase was 2.5-fold higher at 24 h than at 16 h in the periplasmic space. The optimal pH and temperature of the recombinant endochitinase were determined to be 7.0 and 35°C, respectively. It was relatively stable within the pH range of 5–8. Significant activity stimulation by 1 mM Mg²⁺ and 5 mM Fe²⁺ and inhibition by 5 mM Co²⁺ and 5 mM Hg²⁺ were observed. The kinetic constants K_m, V_max and K_cat for the hydrolysis of the colloidal chitin were 1.5 mM, 1.37 μmol min⁻¹ and 6.23 min⁻¹, respectively.     

Hyaluronic acid production by recombinant <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

A gene encoding a new xylanase, named xynZG, was cloned by the genome-walking PCR method from the nematophagous fungus Plectosphaerella cucumerina. The genomic DNA sequence of xynZG contains a 780 bp open reading frame separated by two introns with the sizes of 50 and 46 bp. To our knowledge, this would be the first functional gene cloned from P. cucumerina. The 684 bp cDNA was cloned into vector pHBM905B and transformed into Pichia pastoris GS115 to select xylanase-secreting transformants on RBB-xylan containing plate. The optimal secreting time was 3 days at 25°C and enzymatic activities in the culture supernatants reached the maximum level of 362 U ml⁻¹. The molecular mass of the enzyme was estimated to be 19 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 40°C, respectively. The purified enzyme is stable at room temperature for at least 10 h. The K _m and V _max values for birchwood xylan are 2.06 mg ml⁻¹ and 0.49 mmol min⁻¹mg⁻¹, respectively. The inhibitory effects of various mental ions were investigated. It is interesting to note that Cu²⁺ ion, which strongly inhibits most other xylanases studied, reduces enzyme activity by only 40%. Furthermore, enzyme activity is unaffected by EDTA even at a concentration of 5 mM.     

Characterization of trehalose synthase from <Emphasis Type="Italic">Corynebacterium nitrilophilus</Emphasis> NRC

Trehalose synthase (TSII) from Corynebacterium nitrilophilus NRC was successively purified by ammonium sulphate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-100 columns. The specific activity of the trehalose synthase was increased ~200-fold, from 0.14 U mg⁻¹ protein to 28.3 U mg⁻¹ protein. TSII was found to be a monomeric protein with a molecular weight of 67–69 kDa. Characterization of the enzyme exhibited optimum pH and temperature were 7.5 and 35°C, respectively. The purified enzyme was stable from pH 6.6 to 7.8 and able to prolong its thermal stability up to 35°C. The enzyme activity was inhibited strongly by Zn²⁺, Hg²⁺ and Cu²⁺ and moderately by Ba²⁺, Fe²⁺, Pb²⁺ and Ni²⁺. Other metal ions Ca²⁺, Mg²⁺, Co²⁺, Mn²⁺ and EDTA had almost no effect.     

Cloning,characterization and expression of the chitinase gene of <Emphasis Type="Italic">Enterobacter</Emphasis> sp. NRG4

A chitinase producing bacterium Enterobacter sp. NRG4, previously isolated in our laboratory, has been reported to have a wide range of applications such as anti-fungal activity, generation of fungal protoplasts and production of chitobiose and N-acetyl D-glucosamine from swollen chitin. In this paper, the gene coding for Enterobacter chitinase has been cloned and expressed in Escherichia coli BL21(DE3). The structural portion of the chitinase gene comprised of 1686 bp. The deduced amino acid sequence of chitinase has high degree of homology (99.0%) with chitinase from Serratia marcescens. The recombinant chitinase was purified to near homogeneity using His-Tag affinity chromatography. The purified recombinant chitinase had a specific activity of 2041.6 U mg⁻¹. It exhibited similar properties pH and temperature optima of 5.5 and 45°C respectively as that of native chitinase. Using swollen chitin as a substrate, the K_m, k_cat and catalytic efficiency (k_cat/K_m) values of recombinant chitinase were found to be 1.27 mg ml⁻¹, 0.69 s⁻¹ and 0.54 s⁻¹M⁻¹ respectively. Like native chitinase, the recombinant chitinase produced medicinally important N-acetyl D-glucosamine and chitobiose from swollen chitin and also inhibited the growth of many fungi.     

Influence of agitation and aeration on growth and antibiotic production by <Emphasis Type="Italic">Xenorhabdus nematophila</Emphasis>

The effect of agitation and aeration on the growth and antibiotic production by Xenorhabdus nematophila YL001 grown in batch cultures were investigated. Efficiency of aeration and agitation was evaluated through the oxygen mass transfer coefficient (K _L a). With increase in K _L a, the biomass and antibiotic activity increased. Activity units of antibiotic and dry cell weight were increased to 232 U ml⁻¹ and 19.58 g l⁻¹, respectively, productivity in cell and antibiotic was up more than 30% when K _L a increased from 115.9 h⁻¹ to 185.7 h⁻¹. During the exponential growth phase, DO concentration was zero, the oxygen supply was not sufficient. So, based on process analysis, a three-stage oxygen supply control strategy was used to improved the DO concentration above 30% by controlling the agitation speed and aeration rate. The dry cell weight and activity units of antibiotic were further increased to 24.22 g l⁻¹ and 249 U ml⁻¹, and were improved by 24.0% and 7.0%, compared with fermentation at a constant agitation speed and a constant aeration rate (300 rev min⁻¹, 2.5 l min⁻¹).     

Purification and Properties of an <Emphasis Type="Italic">N</Emphasis>-acetylglucosaminidase from <Emphasis Type="Italic">Streptomyces cerradoensis</Emphasis>

An N-acetylglucosaminidase produced by Streptomyces cerradoensis was partially purified giving, by SDS-PAGE analysis, two main protein bands with Mr of 58.9 and 56.4 kDa. The K_m and V_max values for the enzyme using p-nitrophenyl-β-N-acetylglucosaminide as substrate were of 0.13 mM and 1.95 U mg⁻¹ protein, respectively. The enzyme was optimally activity at pH 5.5 and at 50 °C when assayed over 10 min. Enzyme activity was strongly inhibited by Cu²⁺ and Hg²⁺ at 10 mM, and was specific to substrates containing acetamide groups such as p-nitrophenyl-β-N-acetylglucosaminide and p-nitrophenyl-β-D-N,N′-diacetylchitobiose.     

Highly selective biotransformation of ginsenoside Rb<Subscript>1</Subscript> to Rd by the phytopathogenic fungus<Emphasis Type="Italic"> Cladosporium fulvum</Emphasis> (<Emphasis Type="Italic">syn</Emphasis>.<Emphasis Type="Italic"> Fulvia fulva</Emphasis>)

Fourteen phytopathogenic fungi were tested for their ability to transform the major ginsenosides to the active minor ginsenoside Rd. The transformation products were identified by TLC and HPLC, and their structures were assigned by NMR analysis. Cladosporium fulvum, a tomato pathogen, was found to transform major ginsenoside Rb₁ to Rd as the sole product. The following optimum conditions for transforming Rd by C. fulvum were determined: the time of substrate addition, 24 h; substrate concentration, 0.25 mg ml⁻¹; temperature, 37°C; pH 5.0; and biotransformation period, 8 days. At these optimum conditions, the maximum yield was 86% (molar ratio). Further, a preparative scale transformation with C. fulvum was performed at a dose of 100 mg of Rb₁ by a yield of 80%. This fungus has potential to be applied on the preparation for Rd in pharmaceutical industry.     

Production,purification and characterization of <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE7 xylanase and its application in eucalyptus Kraft pulp biobleaching

Production of extracellular xylanase from Bacillus sp. GRE7 using a bench-top bioreactor and solid-state fermentation (SSF) was attempted. SSF using wheat bran as substrate and submerged cultivation using oat-spelt xylan as substrate resulted in an enzyme productivity of 3,950 IU g⁻¹ bran and 180 IU ml⁻¹, respectively. The purified enzyme had an apparent molecular weight of 42 kDa and showed optimum activity at 70°C and pH 7. The enzyme was stable at 60–80°C at pH 7 and pH 5–11 at 37°C. Metal ions Mn²⁺ and Co²⁺ increased activity by twofold, while Cu²⁺ and Fe²⁺ reduced activity by fivefold as compared to the control. At 60°C and pH 6, the K _m for oat-spelt xylan was 2.23 mg ml⁻¹ and V _max was 296.8 IU mg⁻¹ protein. In the enzymatic prebleaching of eucalyptus Kraft pulp, the release of chromophores, formation of reducing sugars and brightness was higher while the Kappa number was lower than the control with increased enzyme dosage at 30% reduction of the original chlorine dioxide usage. The thermostability, alkali-tolerance, negligible presence of cellulolytic activity, ability to improve brightness and capacity to reduce chlorine dioxide usage demonstrates the high potential of the enzyme for application in the biobleaching of Kraft pulp.     

Combined effects of zinc and algal food on the competition between planktonic rotifers, <Emphasis Type="Italic">Anuraeopsis fissa</Emphasis> and <Emphasis Type="Italic">Brachionus rubens</Emphasis> (Rotifera)

We evaluated the combined effects of algal (Chlorella vulgaris) food levels (low, 0.5 × 10⁶ (or 2.9 μg C ml⁻¹); and high, 1 × 10⁶ cells ml⁻¹ (or 5.8 μg C ml⁻¹)) and zinc concentrations (0, 0.125, and 0.250 mg l⁻¹ of ZnCl₂) on the competition between two common planktonic rotifers Anuraeopsis fissa and Brachionus rubens using their population growth. Median lethal concentration data (LC₅₀) (mean ± 95% confidence intervals) showed that B. rubens was more resistant to zinc (0.554 ± 0.08 mg l⁻¹) than A. fissa (0.315 ± 0.07 mg l⁻¹). A. fissa when grown alone or with Zn was always numerically more abundant than B. rubens. When grown in the absence of zinc, under low- and high-food levels, the peak abundances of A. fissa varied from 251 ± 24 to 661 ± 77 ind. ml⁻¹, respectively, and the corresponding maxima for B. rubens were 52 ± 3 and 102 ± 18 ind. ml⁻¹. At a given food level, competition for food reduced the peak abundances of both rotifers considerably. Increase in Zn concentration also lowered the rotifer abundances. The impact of zinc on competition between the two-rotifer species was evident at low-food level, mainly for A. fissa. At zinc concentrations of 0 and 0.125 mg l⁻¹, the populations of both rotifers continued to grow for about 10 days, but thereafter B. rubens began to decline. Role of zinc on the competitive outcome of the two species is discussed in relation to the changing algal densities in natural water bodies.     

A Novel Phytase appA from <Emphasis Type="Italic">Citrobacter amalonaticus</Emphasis> CGMCC 1696: Gene Cloning and Overexpression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A novel phytase gene appA, with upstream and downstream sequences from Citrobacter amalonaticus CGMCC 1696, was cloned by degenerate polymerase chain reaction (PCR), and thermal asymmetric interlaced (TAIL) PCR and was overexpressed in Pichia pastoris. Sequence analysis revealed one open reading frame that consisted of 1311 bp encoding a 436–amino-acid protein, which had a deduced molecular mass of 46.3 kDa. The phytase appA belongs to the histidine acid phosphatase family and exhibits the highest identity (70.1%) with C. braakii phytase. The gene was overexpressed in P. pastoris. The secretion yield of recombinant appA protein was accumulated to approximately 4.2 mg·mL⁻¹, and the enzyme activity level reached 15,000 U·mL⁻¹, which is higher than any previous reports. r-appA was glycosylated, as shown by Endo H treatment. r-appA was purified and characterized. The specific activity of r-appA for sodium phytate was 3548 U·mg⁻¹. The optimum pH and temperature for enzyme activity were 4.5 and 55°C, respectively. r-appA was highly resistant to pepsin or trypsin treatment. This enzyme could be an economic and efficient alternative to the phytases currently used in the feed industry.     

Production of Alkaline Protease with <Emphasis Type="Italic">Teredinobacter turnirae</Emphasis> in Controlled Fed-batch Fermentation

By using our previously optimized media and a fed-batch operation controlled by LabVIEW Software, the key parameter for a high production of alkaline protease using the marine bacterium, Teredinobacter turnirae, was to maintain a low concentration of C and N-sources ( < 2 g sucrose l⁻¹ and < 0.2 g NH₄C l l⁻¹) using an appropriate fed-batch culture system. A maximum protease activity of 8250 U ml⁻¹ was thus achieved.     

Strain improvement of <Emphasis Type="Italic">Trichoderma reesei</Emphasis> Rut C-30 for increased cellulase production

The strain of Trichoderma reesei Rut C-30 was subjected to mutation after treatment with N-methyl-N′-nitro-N-nitrosoguanidine (NG) for 6 h followed by UV irradiation for 15 min. Successive mutants showed enhanced cellulase production, clear hydrolysis zone and rapid growth on Avicel-containing plate. Particularly, the mutant NU-6 showed approximately two-fold increases in activity of both FPA and CMCase in shake flask culture when grown on basal medium containing peptone (1%) and wheat bran (1%). The enzyme production was further optimized using eight different media. When a mixture of lactose and yeast cream was used as cellulase inducer, the mutant NU-6 yielded the highest enzyme and cell production with a FPase activity of 6.2 U ml⁻¹, a CMCase activity of 54.2 U ml⁻¹, a β-glucosidase activity of 0.39 U ml⁻¹, and a fungal biomass of 12.6 mg ml⁻¹. It deserved noting that the mutant NU-6 also secreted large amounts of xylanases (291.3 U ml⁻¹). These results suggested that NU-6 should be an attractive producer for both cellulose and xylanase production.     

High expression of recombinant <Emphasis Type="Italic">Streptomyces</Emphasis> sp. S38 xylanase in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by codon optimization and analysis of its biochemical properties

In recent years, the biotechnological use of xylanases has grown remarkably. To efficiently produce xylanase for food processing and other industry, a codon-optimized recombinant xylanase gene from Streptomyces sp. S38 was synthesized and extracellularly expressed in Pichia pastoris under the control of AOX1 promoter. SDS-PAGE and activity assay demonstrated that the molecular mass of the recombinant xylanase was estimated to be 25 kDa, the optimum pH and optimum temperature were 5.5 and 50°C, respectively. In shake flask culture, the specific activity of the xylanase activity was 5098.28 U/mg. The K _m and V _max values of recombinant xylanase were 11.0 mg/ml and 10000 μmol min⁻¹ mg⁻¹, respectively. In the presence of metal ions such as Ca²⁺, Cu²⁺, Cr³⁺ and K⁺, the activity of the enzyme increased. However, strong inhibition of the enzyme activity was observed in the presence of Hg²⁺. This is the first report on the expression properties of a recombinant xylanase gene from the Streptomyces sp. S38 using Pichia pastoris. The attractive biochemical properties of the recombinant xylanase suggest that it may be a useful candidate for variety of commercial applications.     

Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

Purification,characterization, and potential applications of formate oxidase from <Emphasis Type="Italic">Debaryomyces vanrijiae</Emphasis> MH201

Formate oxidase was found in cell-free extracts of Debaryomyces vanrijiae MH201, a soil isolate. After purification by column chromatography, the preparation showed a protein band corresponding to a molecular mass (MM) of 64 kDa on sodium dodecyl sulfate–polyacrylamide gel electrophoresis. The MM, estimated by a gel filtration, was 99 kDa. The preparation showed two and three bands on isoelectric focusing under denaturing and native conditions, respectively. These results suggest that the preparation contained three isoforms, each of which might be composed of αα, αβ, and ββ subunits with apparently similar MM. The preparation acted on formate with K _m and V _max values of 11.7 mM and 262 μmol min⁻¹ mg⁻¹, respectively, at pH 4.5 and 25°C, but showed no evidence of activity on the other compounds tested. The optimum pH and temperature were pH 4.0 and 35°C, respectively. The preparation showed activities of 85% of the initial activity after storage at pH 6.0 and 4°C for 8 weeks. When 10 mM formaldehyde was reacted with 2.0 U ml⁻¹ of the enzyme preparation at pH 5.5 and room temperature in the presence of 2.0 U ml⁻¹ of a microbial aldehyde oxidase and 100 U ml⁻¹ of catalase for 180 min, neither of formate nor formaldehyde was detected, suggesting that the reaction involved the quantitative conversion of formaldehyde to carbon dioxide.     

Effect of trace metals on ethanol production from synthesis gas by the ethanologenic acetogen, <Emphasis Type="Italic">Clostridium</Emphasis><Emphasis Type="Italic">ragsdalei</Emphasis>

The effect of trace metal ions (Co²⁺, Cu²⁺, Fe²⁺, Mn²⁺, Mo⁶⁺, Ni²⁺, Zn²⁺, SeO₄ ⁻ and WO₄ ⁻) on growth and ethanol production by an ethanologenic acetogen, Clostridium ragsdalei was investigated in CO:CO₂-grown cells. A standard acetogen medium (ATCC medium no. 1754) was manipulated by varying the concentrations of trace metals in the media. Increasing the individual concentrations of Ni²⁺, Zn²⁺, SeO₄ ⁻ and WO₄ ⁻ from 0.84, 6.96, 1.06, and 0.68 μM in the standard trace metals solution to 8.4, 34.8, 5.3, and 6.8 μM, respectively, increased ethanol production from 35.73 mM under standard metals concentration to 176.5, 187.8, 54.4, and 72.3 mM, respectively. Nickel was necessary for growth of C. ragsdalei. Growth rate (μ) of C. ragsdalei improved from 0.34 to 0.49 (day⁻¹), and carbon monoxide dehydrogenase (CODH) and hydrogenase (H₂ase)-specific activities improved from 38.45 and 0.35 to 48.5 and 1.66 U/mg protein, respectively, at optimum concentration of Ni²⁺. At optimum concentrations of WO₄ ⁻ and SeO₄ ⁻, formate dehydrogenase (FDH) activity improved from 32.3 to 42.6 and 45.4 U/mg protein, respectively. Ethanol production and the activity of FDH reduced from 35 mM and 32.3 U/mg protein to 1.14 mM and 8.79 U/mg protein, respectively, upon elimination of WO₄ ⁻ from the medium. Although increased concentration of Zn²⁺ enhanced growth and ethanol production, the activities of CODH, FDH, H₂ase and alcohol dehydrogenase (ADH) were not affected by varying the Zn²⁺ concentration. Omitting Fe²⁺ from the medium decreased ethanol production from 35.7 to 6.30 mM and decreased activities of CODH, FDH, H₂ase and ADH from 38.5, 32.3, 0.35, and 0.68 U/mg protein to 9.07, 7.01, 0.10, and 0.24 U/mg protein, respectively. Ethanol production improved from 35 to 54 mM when Cu²⁺ was removed from the medium. The optimization of trace metals concentration in the fermentation medium improved enzyme activities (CODH, FDH, and H₂ase), growth and ethanol production by C. ragsdalei.     

High-level expression of the <Emphasis Type="Italic">Penicillium notatum</Emphasis> glucose oxidase gene in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using codon optimization

The glucose oxidase (GOD) gene from Penicillium notatum was expressed in Pichia pastoris. The 1,815 bp gene, god-w, encodes 604 amino acids. Recombinant GOD-w had optimal activity at 35–40°C and pH 6.2 and was stable, from pH 3 to 7 maintaining >75% maximum activity after incubation at 50°C for 1 h. GOD-w worked as well as commercial GODs to improve bread making. To achieve high-level expression of recombinant GOD in P. pastoris, 272 nucleotides involving 228 residues were mutated, consistent with the codon bias of P. pastoris. The optimized recombinant GOD-m yielded 615 U ml⁻¹ (2.5 g protein l⁻¹) in a 3 l fermentor—410% higher than GOD-w (148 U ml⁻¹), and thus is a low-cost alternative for the bread baking industry.