Two crystal structures demonstrate large conformational changes in the eukaryotic ribosomal translocase

Two crystal structures of yeast translation elongation factor 2 (eEF2) were determined: the apo form at 2.9 A resolution and eEF2 in the presence of the translocation inhibitor sordarin at 2.1 A resolution. The overall conformation of apo eEF2 is similar to that of its prokaryotic homolog elongation factor G (EF-G) in complex with GDP. Upon sordarin binding, the three tRNA-mimicking C-terminal domains undergo substantial conformational changes, while the three N-terminal domains containing the nucleotide-binding site form an almost rigid unit. The conformation of eEF2 in complex with sordarin is entirely different from known conformations observed in crystal structures of EF-G or from cryo-EM studies of EF-G-70S complexes. The domain rearrangements induced by sordarin binding and the highly ordered drug-binding site observed in the eEF2-sordarin structure provide a high-resolution structural basis for the mechanism of sordarin inhibition. The two structures also emphasize the dynamic nature of the ribosomal translocase.     

Electron microscopy of the stacked disk aggregate of tobacco mosaic virus protein. I. Three-dimensional image reconstruction

The three-dimensional structure of the stacked disk aggregate of tobacco mosaic virus protein has been determined from “phase plate” electron micrographs to an effective resolution of about 12 Å. It is a long rod comprised of paired rings of protein (disks), the subunits of which have different conformations according to which ring they belong. The two subunit conformations are such that the rings come close together within a disk near the outer surface of the particle, but between disks on the inside. This property, interpreted on the basis of a polar packing of the subunits, was established from an earlier, lower resolution, study by Finch &; Klug (1971). The present study shows, in addition, that the pairing is contributed mainly by axial distortions of the subunits in one of the rings, the axial distortions of the subunits in the other being largely replaced at lower radii by a tilt or twist and, at higher radii, by a slew. The subunits in the latter ring appear to have a conformation similar to that of the protein molecules in the virus.     

Conformational changes in serpins: I. The native and cleaved conformations of alpha(1)-antitrypsin

The serpins (SERine Proteinase INhibitors) are a family of proteins with important physiological roles, including but not limited to the inhibition of chymotrypsin-like serine proteinases. The inhibitory mechan- ism involves a large conformational change known as the S-->R (stressed-->relaxed) transition. The largest structural differences occur in a region around the scissile bond called the reactive centre loop: In the native (S) state, the reactive centre is exposed, and is free to interact with proteinases. In inhibitory serpins, in the cleaved (R) state the reactive centre loop forms an additional strand within the beta-sheet. The latent state is an uncleaved state in which the intact reactive centre loop is integrated into the A sheet as in the cleaved form, to give an alternative R state.The serpin structures illustrate detailed control of conformation within a single protein. Serpins are also an unusual family of proteins in which homologues have native states with different folding topologies. Determination of the structures of inhibitory serpins in multiple conformational states permits a detailed analysis of the mechanism of the S-->R transition, and of the way in which a single sequence can form two stabilised states of different topology.Here we compare the conformations of alpha(1)-antitrypsin in native and cleaved states. Many protein conformational changes involve relative motions of large rigid subunits. We determine the rigid subunits of alpha(1)-antitrypsin and analyse the changes in their relative position and orientation. Knowing that the conformational change is initiated by cleavage at the reactive centre, we describe a mechanism of the S-->R transition as a logical sequence of mechanical effects, even though the transition likely proceeds in a concerted manner.     

Conformational changes in serpins: I. The native and cleaved conformations of alpha(1)-antitrypsin

The serpins (SERine Proteinase INhibitors) are a family of proteins with important physiological roles, including but not limited to the inhibition of chymotrypsin-like serine proteinases. The inhibitory mechan- ism involves a large conformational change known as the S-->R (stressed-->relaxed) transition. The largest structural differences occur in a region around the scissile bond called the reactive centre loop: In the native (S) state, the reactive centre is exposed, and is free to interact with proteinases. In inhibitory serpins, in the cleaved (R) state the reactive centre loop forms an additional strand within the beta-sheet. The latent state is an uncleaved state in which the intact reactive centre loop is integrated into the A sheet as in the cleaved form, to give an alternative R state.The serpin structures illustrate detailed control of conformation within a single protein. Serpins are also an unusual family of proteins in which homologues have native states with different folding topologies. Determination of the structures of inhibitory serpins in multiple conformational states permits a detailed analysis of the mechanism of the S-->R transition, and of the way in which a single sequence can form two stabilised states of different topology.Here we compare the conformations of alpha(1)-antitrypsin in native and cleaved states. Many protein conformational changes involve relative motions of large rigid subunits. We determine the rigid subunits of alpha(1)-antitrypsin and analyse the changes in their relative position and orientation. Knowing that the conformational change is initiated by cleavage at the reactive centre, we describe a mechanism of the S-->R transition as a logical sequence of mechanical effects, even though the transition likely proceeds in a concerted manner.     

Elucidating the medium-resolution structure of ribosomal particles: an interplay between electron cryo-microscopy and X-ray crystallograhy.

BACKGROUND: Ribosomes are the universal cellular organelles that accomplish the translation of the genetic code into proteins. Electron cryo-microscopy (cryo-EM) has yielded fairly detailed three-dimensional reconstructions of ribosomes. These were used to assist in the determination of higher resolution structures by X-ray crystallography. RESULTS: Molecular replacement studies using cryo-EM reconstructions provided feasible packing schemes for crystals of ribosomes and their two subunits from Thermus thermophilus, and of the large subunits from Haloarcula marismortui. For the large subunits, these studies also confirmed the major heavy-atom sites obtained by single isomorphous replacement combined with anomalous diffraction (SIRAS) and by multiple isomorphous replacement combined with anomalous diffraction (MIRAS) at approximately 10 A. Although adequate starting phases could not be obtained for the small subunits, the crystals of which diffract to 3.0 A, cryo-EM reconstructions were indispensable for analyzing their 7.2 A multiple isomorphous replacement (MIR) map. This work indicated that the conformation of the crystallized small subunits resembles that seen within the 70S ribosomes. Subsequently, crystals of particles trapped in their functionally active state were grown. CONCLUSIONS: Single-particle cryo-EM can contribute to the progress of crystallography of non-symmetrical, large and flexible macromolecular assemblies. Besides confirming heavy-atom sites, obtained from flat or overcrowded difference Patterson maps, the cryo-EM reconstructions assisted in elucidating packing arrangements. They also provided tools for the identification of the conformation within the crystals and for the estimation of the level of inherent non-isomorphism.     

Joint use of small-angle X-ray and neutron scattering to study biological macromolecules in solution

Novel techniques for simultaneous analysis of X-ray and neutron scattering patterns from macromolecular complexes in solution are presented. They include ab initio shape and internal structure determination of multicomponent particles and more detailed rigid body modeling of complexes using high resolution structures of subunits. The methods fit simultaneously X-ray and neutron scattering curves including contrast variation data sets from selectively deuterated complexes. Biochemically sound interconnected models without steric clashes between the components displaying a pre-defined symmetry are generated. For rigid body modeling, distance restraints between specified residues/nucleotides or their ranges are taken into account. The efficiency of the methods is demonstrated in model examples, and potential sources of ambiguity are discussed.     

Normal mode-based fitting of atomic structure into electron density maps: application to sarcoplasmic reticulum Ca-ATPase

A method for the flexible docking of high-resolution atomic structures into lower resolution densities derived from electron microscopy is presented. The atomic structure is deformed by an iterative process using combinations of normal modes to obtain the best fit of the electron microscopical density. The quality of the computed structures has been evaluated by several techniques borrowed from crystallography. Two atomic structures of the SERCA1 Ca-ATPase corresponding to different conformations were used as a starting point to fit the electron density corresponding to a different conformation. The fitted models have been compared to published models obtained by rigid domain docking, and their relation to the known crystallographic structures are explored by normal mode analysis. We find that only a few number of modes contribute significantly to the transition. The associated motions involve almost exclusively rotation and translation of the cytoplasmic domains as well as displacement of cytoplasmic loops. We suggest that the movements of the cytoplasmic domains are driven by the conformational change that occurs between nonphosphorylated and phosphorylated intermediate, the latter being mimicked by the presence of vanadate at the phosphorylation site in the electron microscopy structure.     

X-ray solution scattering (SAXS) combined with crystallography and computation: defining accurate macromolecular structures, conformations and assemblies in solution

Crystallography supplies unparalleled detail on structural information critical for mechanistic analyses; however, it is restricted to describing low energy conformations of macromolecules within crystal lattices. Small angle X-ray scattering (SAXS) offers complementary information about macromolecular folding, unfolding, aggregation, extended conformations, flexibly linked domains, shape, conformation, and assembly state in solution, albeit at the lower resolution range of about 50 A to 10 A resolution, but without the size limitations inherent in NMR and electron microscopy studies. Together these techniques can allow multi-scale modeling to create complete and accurate images of macromolecules for modeling allosteric mechanisms, supramolecular complexes, and dynamic molecular machines acting in diverse processes ranging from eukaryotic DNA replication, recombination and repair to microbial membrane secretion and assembly systems. This review addresses both theoretical and practical concepts, concerns and considerations for using these techniques in conjunction with computational methods to productively combine solution scattering data with high-resolution structures. Detailed aspects of SAXS experimental results are considered with a focus on data interpretation tools suitable to model protein and nucleic acid macromolecular structures, including membrane protein, RNA, DNA, and protein-nucleic acid complexes. The methods discussed provide the basis to examine molecular interactions in solution and to study macromolecular flexibility and conformational changes that have become increasingly relevant for accurate understanding, simulation, and prediction of mechanisms in structural cell biology and nanotechnology.     

Characteristic views of prokaryotic 50S ribosomal subunits

Summary Multivariate statistical analysis and classification techniques are powerful tools in sorting noisy electron micrographs of single particles according to their principal features, enabling one to form average images with an enhanced signal-to-noise ratio and a better reproducible resolution. We apply this methodology here to determining the characteristic views of the large (50S) ribosomal subunits from the eubacteriumEscherichia coli and the archaebacteriaMethanococcus vannielii, Sulfolobus solfataricus, andHalobacterium marismortui. Average images were obtained of the subunit in the common crown and kidney projections, but views of the particle in orientations intermediate between these two extremes were also elucidated for all species. These averages show reproducible detail of up to 2.0 nm resolution, thus enabling the visualization and interspecies comparison of many structural features as a first step toward comparing the actual three-dimensional structures. Our results disprove evolutionary lineages recently postulated on the basis of electron microscopical images of ribosomal subunits.     

Gold nanoparticle-protein arrays improve resolution for cryo-electron microscopy

Cryo-electron microscopy single particle analysis shows limited resolution due to poor alignment precision of noisy images taken under low electron exposure. Certain advantages can be obtained by assembling proteins into two-dimensional (2D) arrays since protein particles are locked into repetitive orientation, thus improving alignment precision. We present a labeling method to prepare protein 2D arrays using gold nanoparticles (NPs) interconnecting genetic tag sites on proteins. As an example, mycobacterium tuberculosis 20S proteasomes tagged with 6x-histidine were assembled into 2D arrays using 3.9-nm Au NPs functionalized with nickel-nitrilotriacetic acid. The averaged top-view images from the array particles showed higher resolution (by 6-8A) compared to analysis of single particles. The correct 7-fold symmetry was also evident by using array particles whereas it was not clear by analysis of a comparable number of single particles. The applicability of this labeling method for three-dimensional reconstruction of biological macromolecules is discussed.     

Detecting circular and rectangular particles based on geometric feature detection in electron micrographs

Accurate and automatic particle detection from cryo-electron microscopy (cryo-EM images) is very important for high-resolution reconstruction of large macromolecular structures. In this paper, we present a method for particle picking based on shape feature detection. Two fundamental concepts of computational geometry, namely, the distance transform and the Voronoi diagram, are used for detection of critical features as well as for accurate location of particles from the images or micrographs. Unlike the conventional template-matching methods, our approach detects the particles based on their boundary features instead of intensities. The geometric features derived from the boundaries provide an efficient way for locating particles quickly and accurately, which avoids a brute-force searching for the best position/orientation. Our approach is fully automatic and has been successfully applied to detect particles with approximately circular or rectangular shapes (e.g., KLH particles). Particle detection can be enhanced by multiple sets of parameters used in edge detection and/or by anisotropic filtering. We also discuss the extension of this approach to other types of particles with certain geometric features.     

Closed conformation of the active site loop of rabbit muscle triosephosphate isomerase in the absence of substrate: evidence of conformational heterogeneity

The active site loop of triosephosphate isomerase (TIM) exhibits a hinged-lid motion, alternating between the two well defined "open" and "closed" conformations. Until now the closed conformation had only been observed in protein complexes with substrate analogues. Here, we present the first rabbit muscle apo TIM structure, refined to 1.5A resolution, in which the active site loop is either in the open or in the closed conformation in different subunits of the enzyme. In the closed conformation described here, the lid loop residues participate in stabilizing hydrogen bonds characteristic of holo TIM structures, whereas chemical interactions observed in the open loop conformation are similar to those found in the apo structures of TIM. In the closed conformation, a number of water molecules are observed at the projected ligand atom positions that are hydrogen bonded to the active site residues. Additives used during crystallization (DMSO and Tris molecules and magnesium atoms) were modeled in the electron density maps. However, no specific binding of these molecules is observed at, or close to, the active site and the lid loop. To further investigate this unusual closed conformation of the apo enzyme, two more rabbit muscle TIM structures, one in the same and another in a different crystal form, were determined. These structures present the open lid conformation only, indicating that the closed conformation cannot be explained by crystal contact effects. To rationalize why the active site loop is closed in the absence of ligand in one of the subunits, extensive comparison with previously solved TIM structures was carried out, supported by the bulk of available experimental information about enzyme kinetics and reaction mechanism of TIM. The observation of both open and closed lid conformations in TIM crystals might be related to a persistent conformational heterogeneity of this protein in solution.     

Three-dimensional structure of 50 S Escherichia coli ribosomal subunits depleted of proteins L7/L12

A structural study of Escherichia coli 50 S ribosomal subunits depleted selectively of proteins L7/L12 and visualized by low-dose electron microscopy has been carried out by multivariate statistical analysis, classification schemes and the new reconstruction technique from single-exposure, random-conical tilt series. This approach has allowed us to solve the three-dimensional structure of the depleted 50 S subunits at a resolution of 3 nm-1. In addition, two distinct morphological populations of subunits (cores) have been identified in the electron micrographs analyzed and have been separately studied in three dimensions. Depleted subunits in the two morphological states present as main features common to these two structures but different from those of the non-depleted subunit (1) the absence of the stalk, (2) a rearrangement of the stalk-base that changes the overall structure of this region. This morphological change is quite noticeable and important, since this region is mapped as a part of the GTPase center. The two conformations differ mainly in the orientation of the area between the L1 region and the head (the probable localization of the peptidyl transferase center) and in the accessibility of the region located below the head. A possible relationship of these structural changes to the functional dynamics of the ribosome is suggested.     

Structural analysis of membrane protein complexes by single particle electron microscopy

Single particle electron microscopy (EM) is an increasingly important tool for the structural analysis of macromolecular complexes. The main advantage of the technique over other methods is that it is not necessary to precede the analysis with the growth of crystals of the sample. This advantage is particularly important for membrane proteins and large protein complexes where generating crystals is often the main barrier to structure determination. Therefore, single particle EM can be employed with great utility in the study of large membrane protein complexes. Although the construction of atomic resolution models by single particle EM is possible in theory, currently the highest resolution maps are still limited to approximately 7-10A resolution and 15-30 A resolution is more typical. However, by combining single particle EM maps with high-resolution models of subunits or subcomplexes from X-ray crystallography and NMR spectroscopy it is possible to build up an atomic model of a macromolecular assembly. Image analysis procedures are almost identical for micrographs of soluble protein complexes and detergent solubilized membrane protein complexes. However, electron microscopists attempting to prepare specimens of a membrane protein complex for imaging may find that these complexes require different handling than soluble protein complexes. This paper seeks to explain how high-quality specimen grids of membrane protein complexes may be prepared to allow for the determination of their structure by EM and image analysis.     

单颗粒电子显微学的研究进展

单颗粒电子显微学是一种新型的结构生物学技术和方法,一方面,其解析生物大分子复合体结构的分辨率日益提高,可以达到近原子分辨率,提供大蛋白分子或复合体的精细结构;另一方面,还可以解析生物大分子在不同功能状态下的结构及变化,对于揭示生物大分子复合体结构的作用机理具有重要作用。本文就单颗粒电子显微学的研究进展作一综述。     

Diversity of base-pair conformations and their occurrence in rRNA structure and RNA structural motifs

In addition to the canonical base-pairs comprising the standard Watson-Crick (C:G and U:A) and wobble U:G conformations, an analysis of the base-pair types and conformations in the rRNAs in the high-resolution crystal structures of the Thermus thermophilus 30S and Haloarcula marismortui 50S ribosomal subunits has identified a wide variety of non-canonical base-pair types and conformations. However, the existing nomenclatures do not describe all of the observed non-canonical conformations or describe them with some ambiguity. Thus, a standardized system is required to classify all of these non-canonical conformations appropriately. Here, we propose a new, simple and systematic nomenclature that unambiguously classifies base-pair conformations occurring in base-pairs, base-triples and base-quadruples that are associated with secondary and tertiary interactions. This system is based on the topological arrangement of the two bases and glycosidic bonds in a given base-pair. Base-pairs in the internal positions of regular secondary structure helices usually form with canonical base-pair groups (C:G, U:A, and U:G) and canonical conformations (C:G WC, U:A WC, and U:G Wb). In contrast, non-helical base-pairs outside of regular structure helices usually have non-canonical base-pair groups and conformations. In addition, many non-helical base-pairs are involved in RNA motifs that form a defined set of non-canonical conformations. Thus, each rare non-canonical conformation may be functionally and structurally important. Finally, the topology-based isostericity of base-pair conformations can rationalize base-pair exchanges in the evolution of RNA molecules.     

Structure of a human pre-40S particle points to a role for RACK1 in the final steps of 18S rRNA processing

Synthesis of ribosomal subunits in eukaryotes is a complex and tightly regulated process that has been mostly characterized in yeast. The discovery of a growing number of diseases linked to defects in ribosome biogenesis calls for a deeper understanding of these mechanisms and of the specificities of human ribosome maturation. We present the 19 Å resolution cryo-EM reconstruction of a cytoplasmic precursor to the human small ribosomal subunit, purified by using the tagged ribosome biogenesis factor LTV1 as bait. Compared to yeast pre-40S particles, this first three-dimensional structure of a human 40S subunit precursor shows noticeable differences with respect to the position of ribosome biogenesis factors and uncovers the early deposition of the ribosomal protein RACK1 during subunit maturation. Consistently, RACK1 is required for efficient processing of the 18S rRNA 3′-end, which might be related to its role in translation initiation. This first structural analysis of a human pre-ribosomal particle sets the grounds for high-resolution studies of conformational transitions accompanying ribosomal subunit maturation.     

Crystal structure of a 70S ribosome-tRNA complex reveals functional interactions and rearrangements

Our understanding of the mechanism of protein synthesis has undergone rapid progress in recent years as a result of low-resolution X-ray and cryo-EM structures of ribosome functional complexes and high-resolution structures of ribosomal subunits and vacant ribosomes. Here, we present the crystal structure of the Thermus thermophilus 70S ribosome containing a model mRNA and two tRNAs at 3.7 A resolution. Many structural details of the interactions between the ribosome, tRNA, and mRNA in the P and E sites and the ways in which tRNA structure is distorted by its interactions with the ribosome are seen. Differences between the conformations of vacant and tRNA-bound 70S ribosomes suggest an induced fit of the ribosome structure in response to tRNA binding, including significant changes in the peptidyl-transferase catalytic site.