Activation of the dynein adenosinetriphosphatase by microtubules

Previous work has indicated that following the rapid adenosine 5'-triphosphate (ATP) induced dissociation of the microtubule-dynein complex, the rate-limiting step in the ATPase cycle is product release [Johnson, K. A. (1983) J. Biol. Chem. 258, 13825-13832], which occurs at a rate of approximately 2-6 s-1. In this report we complete the analysis of the ATPase cycle by examining the effect of microtubules on the rate of product release. For these studies we used repolymerized Tetrahymena axonemal microtubules and microtubule-associated protein (MAP) free bovine brain microtubules which were shown to be free of any measureable ATPase activity. Tetrahymena 22S dynein bound to these microtubules predominantly by the ATP-sensitive site and at a rate giving an apparent second-order rate constant of (0.2-1) X 10(6) M-1 s-1, which is 50-fold greater than the rate observed with brain microtubules containing MAPs. ATP induced the rapid dissociation of the microtubule-dynein complex with an apparent second-order rate constant vs. ATP concentration equal to 1.6 X 10(6) M-1 s-1; this value is only slightly lower than that observed in the presence of MAPs. After the ATP-induced dissociation, the dynein reassociated with the microtubules following a lag period due to the time required to hydrolyze the ATP. The duration of the lag time for reassociation decreased with increasing microtubule concentration, suggesting that microtubules increased the rate of ATP turnover. Direct measurements at steady state showed that the specific activity of the dynein increased with increasing microtubule concentration.(ABSTRACT TRUNCATED AT 250 WORDS)     

ADP release is rate limiting in steady-state turnover by the dynein adenosinetriphosphatase

The kinetics of the product release steps in the pathway of ATP hydrolysis by dynein were investigated by examining the rate and partition coefficient of phosphate-water 18O exchange under equilibrium and steady-state conditions. Dynein catalyzed both medium and intermediate phosphate-water oxygen exchange with a partition coefficient of 0.30. The dependence of the rate of loss of the fully labeled phosphate species on the concentration of ADP was hyperbolic, with an apparent Kd for the binding of ADP to dynein of 0.085 mM. The apparent second-order rate constant for phosphate binding to the dynein-ADP complex was 8000 M-1 s-1. The time course of medium phosphate-water oxygen exchange during net ATP hydrolysis was examined in the presence of an ATP regeneration system. The observed rate of loss of P18O4 was comparable to the rate observed at saturating ADP which implies that ADP release is rate limiting for dynein in the steady state. Product inhibition of the dynein ATPase was also examined. ADP inhibited the enzyme competitively with a Ki of 0.4 mM. Phosphate was a linear noncompetitive mixed-type inhibitor with a Ki of 11 mM. These data were fit to a model in which phosphate release is fast and is followed by rate-limiting release of ADP, allowing us to define each rate constant in the pathway. A discrepancy between the total free energy calculated compared to the known free energy of ATP hydrolysis suggests that there is an additional step in the pathway, perhaps involving a change in conformation of the enzyme-ADP state preceding ADP release.     

Adenosine 5'-O-(3-thiotriphosphate) hydrolysis by dynein

The interaction of dynein with ATP gamma S, a phosphorothioate analogue of ATP, has been investigated in depth. The hydrolyses of ATP gamma S and of ATP were shown to be mutually competitive. ATP gamma S induced complete dissociation of the microtubule-dynein complex such that the time course of dissociation monitored by stopped-flow light-scattering methods followed a single exponential. The ATP gamma S concentration dependence of the rate of dissociation was hyperbolic, indicating that the dissociation is at least a two-step process: M.D + ATP gamma S in equilibrium M.D.ATP gamma S----M + D.ATP gamma S. The fit to the hyperbola gives an apparent Kd = 0.5 mM for the binding of ATP gamma S to the microtubule-dynein complex, and the maximal rate of 45 s-1 defines the rate of dissociation of the ternary M.D.ATP gamma S complex. Rapid quench-flow experiments demonstrated that the hydrolysis of ATP gamma S by dynein exhibited an initial burst of product formation. The size of the burst was 1.2 mol/10(6) g of dynein, comparable to that in the case of ATP hydrolysis. The steady-state rate of ATP gamma S turnover by dynein was activated by MAP-free microtubules. Because the rate of ATP gamma S turnover is severalfold (4-8) slower than ATP turnover, the rate-limiting step must be release of thiophosphate, not ADP. Thus, microtubules can activate the rate of thiophosphate release. The stereochemical course of phosphoric residue transfer was determined by using ATP gamma S stereospecifically labeled in the gamma position with 18O.(ABSTRACT TRUNCATED AT 250 WORDS)     

Rate of ATP synthesis by dynein

The rates of ATP synthesis and release by the dynein ATPase were determined in order to estimate thermodynamic parameters according to the pathway: (Formula: see text). Dynein was incubated with high concentrations of ADP and Pi to drive the net synthesis of ATP, and the rate of ATP production was monitored fluorometrically by production of NADPH through a coupled assay using hexokinase and glucose-6-phosphate dehydrogenase. The turnover number for the rate of release of ATP from 22S dynein was 0.01 s-1 per site at pH 7.0, 28 degrees C, assuming a molecular weight of 750 000 per site. The same method gave a rate of ATP synthesis by myosin subfragment 1 of 3.4 X 10(-4) s-1 at pH 7.0, 28 degrees C. The rate of ATP synthesis at the active site was estimated from the time dependence of medium phosphate-water oxygen exchange. Dynein was incubated with ADP and [18O] Pi, and the rate of loss of the labeled oxygen to water was monitored by 31P NMR. A partition coefficient of 0.31 was determined, which is equal to k-2/(k-2 + k3). Assuming k3 = 8 s-1 [Johnson, K.A. (1983) J. Biol. Chem. 258, 13825-13832], k-2 = 3.5 s-1. From the rates of ATP binding and hydrolysis measured previously (Johnson, 1983), the equilibrium constants for ATP binding and hydrolysis could be calculated: K1 = 5 X 10(7) M-1 and K2 = 14.(ABSTRACT TRUNCATED AT 250 WORDS)     

Activation of the dynein adenosinetriphosphatase by cross-linking to microtubules

The microtubule-dynein complex consisting of 22S dynein from Tetrahymena cilia and MAP-free microtubules was subjected to treatment with various concentrations of 1-ethyl-3-[3-(dimethylamino)-propyl]carbodiimide (EDC), a zero-length cross-linker, at 28 degrees C for 1 h. Following cross-linking of the microtubule-dynein complex, nearly all of the ATPase activity cosedimented with the microtubules in the presence of ATP. Electron microscopic observation by negative staining revealed that, following treatment with 1 mM EDC, the complex did not dissociate in the presence of ATP, although the dynein decoration pattern was disordered. The complex treated with 3 mM EDC exhibited normal microtubule-dynein patterns even after the addition of ATP. The ATPase activity of the microtubule-dynein complex was enhanced about 30-fold by the treatment with 1-3 mM EDC. These results indicate that the ATPase activation was caused by the close proximity of the dynein ATPase sites to the microtubules and provide further support for the functional interaction of all three dynein heads with the microtubule. The maximal specific activity was 12 mumol min-1 (mg of dynein)-1, corresponding to a turnover rate of 150 s-1, which may be the rate-limiting step at infinite microtubule concentration and may represent the maximum rate of force production in the axoneme.     

Presteady state kinetic analysis of vanadate-induced inhibition of the dynein ATPase

The effects of vanadate on the kinetics of ATP binding and hydrolysis by Tetrahymena 30 S dynein were examined by presteady state kinetic analysis. Up to a concentration of 400 microM, vanadate did not inhibit the rate or amplitude of the ATP binding-induced dissociation of the microtubule-dynein complex measured by stopped flow light-scattering methods. Chemical quench flow experiments showed that vanadate (80 microM) did not alter the rate or amplitude of the presteady state ATP binding or ATP hydrolysis transients, but the steady state hydrolysis of ATP was blocked immediately after a single turnover of ATP. Preincubation of the enzyme with ADP and vanadate inhibited both presteady state and steady state hydrolysis. These data suggest that vanadate acts as a phosphate analog to form an enzyme-ADP-vanadate complex, analogous to the transition state during catalysis, by the following pathway: (formula; see text) where V represents vanadate and D represents a dynein active site. ADP and vanadate, added together, induced dissociation of the microtubule-dynein complex at a maximum rate of 0.6 S-1. These observations imply that a microtubule-dynein-ADP-vanadate complex was formed which subsequently dissociated as shown below: (formula; see text) where M denotes a microtubule. The ADP plus vanadate-induced dissociation may represent the reverse of the normal forward pathway involving the binding of a dynein-ADP-phosphate complex to a microtubule.     

The pathway of ATP hydrolysis by dynein. Kinetics of a presteady state phosphate burst

The kinetics of ATP binding and hydrolysis (formation of acid-labile phosphate) by the Tetrahymena 30 S dynein ATPase has been measured by chemical quench flow methods. The amplitude of the ATP-binding transient gave a molecular weight per ATP-binding site of approximately 750,000, suggesting nearly 3 ATP binding sites/2 million Mr dynein molecule (Johnson, K. A., and Wall, J.S. (1983) J. Cell Biol. 96, 669-678). ATP binding occurred at the rate predicted from the apparent second order rate constant of 4.7 X 10(6) M-1 S-1 measured by analysis of the ATP-induced dissociation of the microtubule-dynein complex (Porter, M. E., and Johnson, K. A. (1983) J. Biol. Chem. 258, 6582-6587). Hydrolysis was slower than binding and occurred at a rate of 55 S-1, at 30 and 50 microM ATP. The rate limiting step for steady state turnover (product release) occurred with a rate constant of 8 S-1. These data show that the first two steps of the pathway of coupling ATP hydrolysis to the microtubule-dynein cross-bridge cycle are the same as those described by Lymn and Taylor for actomyosin (Lymn, R. W., and Taylor, E. W. (1971) Biochemistry 10, 4617-4624). Namely, ATP binding induces the very rapid dissociation of dynein from the microtubule and ATP hydrolysis occurs more slowly following dissociation. Moreover, in spite of rather gross structural differences, the kinetic constants for dynein and myosin are quite similar.     

Transient state kinetic analysis of the ATP-induced dissociation of the dynein-microtubule complex

The kinetics of ATP-induced dissociation of dynein from the dynein-microtubule complex has been investigated by stopped flow light scattering methods. The addition of ATP to the dynein-microtubule complex induced a large, rapid decrease in light scattering followed by a smaller and much slower decrease. The fast light scattering change was shown to be a measure of the ATP-induced dissociation of dynein from the dynein-microtubule complex and was distinguished from microtubule disassembly by several criteria. (i) The fast reaction occurred over a period of milliseconds and the rate was a function of the ATP concentration, whereas, the slow reaction occurred over a period of several seconds and was independent of ATP concentration; (ii) the amplitude of the fast reaction was directly proportional to the amount of dynein bound to the microtubule lattice; and (iii) only the slow phase was inhibited by the addition of the microtubule-stabilizing drug, taxol. The rate of ATP-induced dissociation of dynein from the microtubule increased linearly with increasing ATP concentration to give an apparent second order rate constant for ATP binding equal to k1 = 4.7 X 10(6) M-1 s-1 according to the following pathway: (formula; see text) where M X D represents the dynein-microtubule complex and D represents dynein. The loss of signal amplitude at high ATP concentration provided a minimum estimate for the rate of dissociation of the ternary complex (M X D X ATP) equal to kd greater than 1000 s-1. Thus, the dynein-microtubule system is similar to actomyosin in that ATP induces an extremely rapid dissociation of dynein from the microtubule.     

Dynamic interaction between actin and myosin subfragment 1 in the presence of ADP

The equilibrium and dynamics of the interaction between actin, myosin subfragment 1 (S1), and ADP have been investigated by using actin which has been covalently labeled at Cys-374 with a pyrene group. The results are consistent with actin binding to S1.ADP (M.D) in a two-step reaction, A + M.D K1 equilibrium A-M.D K2 equilibrium A.M.D, in which the pyrene fluorescence only monitors the second step. In this model, K1 = 2.3 X 10(4) M-1 (k+1 = 4.6 X 10(4) M-1 s-1) and K2 = 10 (k+2 less than or equal to 4 s-1); i.e., both steps are relatively slow compared to the maximum turnover of the ATPase reaction. ADP dissociates from both M.D and A-M.D at 2 s-1 and from A.M.D at greater than or equal to 500 s-1; therefore, actin only accelerates the release of product from the A.M.D state. This model is consistent with the actomyosin ATPase model proposed by Geeves et al. [(1984) J. Muscle Res. Cell Motil. 5, 351]. The results suggest that A-M.D cannot break down at a rate greater than 4 s-1 by dissociation of ADP, by dissociation of actin, or by isomerizing to A.M.D. It is therefore unlikely to be significantly occupied in a rapidly contracting muscle, but it may have a role in a muscle contracting against a load where the ATPase rate is markedly inhibited. Under these conditions, this complex may have a role in maintaining tension with a low ATP turnover rate.     

Catalytic site occupancy during ATP hydrolysis by MF1-ATPase. Evidence for alternating high affinity sites during steady-state turnover

The mechanism of ATP hydrolysis by the solubilized mitochondrial ATPase (MF1) has been studied under conditions where catalytic turnover occurs at one site, uni-site catalysis (obtained when enzyme is in excess of substrate), or at two sites, bi-site catalysis (obtained when substrate is in excess of enzyme). Pulse-chase experiments support the conclusion that the sites which participate in bi-site catalysis are the same as those which participate in uni-site catalysis. Upon addition of ATP in molar excess to MF1, label that was bound under uni-site conditions dissociates at a rate equal to the rate of bi-site catalysis. Similarly, when medium ATP is removed, label that was bound under bi-site conditions dissociates at a rate equal to the rate of uni-site catalysis. Evidence that a high affinity catalytic site equivalent to the one observed under uni-site conditions participates as an intermediate in bi-site catalysis includes the demonstration of full occupancy of a catalytically competent site during steady-state turnover at nanomolar concentrations of ATP. Improved measurements of the interaction of ADP at a high affinity catalytic site have lead to the revision of several of the rate constants that define uni-site catalysis. The rate constant for unpromoted dissociation of ADP is equal to that for Pi (4 X 10(-3) s-1). The rate of binding ADP at a high affinity chaseable site (Kd = 1 nM) is equal to the rate of binding ATP (4 X 10(6) M-1 s-1). The rate of catalysis obtained when substrate binding at one site promotes product release from an adjacent site (bi-site catalysis) is up to 100,000-fold faster than unpromoted product release (uni-site catalysis).     

Kinetic evidence for multiple dynein ATPase sites

We have examined the kinetics of ATP-induced dissociation of the microtubule-dynein complex at low ATP concentrations in the presence of vanadate, which inhibits the enzyme after the binding and hydrolysis of a single ATP per site (Shimizu, T., and Johnson, K. A. (1983) J. Biol. Chem. 258, 13833-13840). Four aspects of the dissociation reaction could not be explained by a model of dynein with a single ATP-sensitive microtubule binding site. First, titration of the light-scattering amplitude versus ATP concentration in the presence of vanadate gave Mr = 720,000/ATP binding site, indicating approximately 2.8 sites/2 million molecular weight particle. Second, the dissociation reaction was incomplete at concentrations of less than 2 microM ATP in the absence of vanadate, while the addition of vanadate led to complete dissociation at an increased rate. Third, the time course of dissociation induced by less than or equal to 1 microM ATP in the presence of vanadate was biphasic, with a small but distinct lag. Fourth, the ATP concentration dependence of the rate of dissociation in the absence of vanadate was concave upward at concentrations of ATP less than 5 microM, whereas the plot was linear in the presence of vanadate. These data suggest that dynein has three ATP-sensitive microtubule binding sites and each site must bind ATP for dynein to detach from the microtubule.     

Reactions of 1-N6-ethenoadenosine nucleotides with myosin subfragment 1 and acto-subfragment 1 of skeletal and smooth muscle

The fluorescent nucleotides epsilon ADP and epsilon ATP were used to study the binding and hydrolysis mechanisms of subfragment 1 (S-1) and acto-subfragment 1 from striated and smooth muscle. The quenching of the enhanced fluorescence emission of bound nucleotide by acrylamide analyzed either by the Stern-Volmer method or by fluorescence lifetime measurements showed the presence of two bound nucleotide states for 1-N6-ethenoadenosine triphosphate (epsilon ATP), 1-N6-ethenoadenosine diphosphate (epsilon ADP), and epsilon ADP-vanadate complexes with S-1. The equilibrium constant relating the two bound nucleotide states was close to unity. Transient kinetic studies showed two first-order transitions with rate constants of approximately 500 and 100 s-1 for both epsilon ATP and epsilon ADP and striated muscle S-1 and 300 and 30 s-1, respectively, for smooth muscle S-1. The hydrolysis of [gamma-32P] epsilon ATP yielded a transient phase of small amplitude (less than 0.2 mol/site) with a rate constant of 5-10 s-1. Consequently, the hydrolysis of the substrate is a step in the mechanism which is distinct from the two conformational changes induced by the binding of epsilon ATP. An essentially symmetric reaction mechanism is proposed in which two structural changes accompany substrate binding and the reversal of these steps occurs in product release. epsilon ATP dissociates acto-S-1 as effectively as ATP. For smooth muscle acto-S-1, dissociation proceeds in two steps, each accompanied by enhancement of fluorescence emission. A symmetric reaction scheme is proposed for the acto-S-1 epsilon ATPase cycle. The very similar kinetic properties of the reactions of epsilon ATP and ATP with S-1 and acto-S-1 suggest that two ATP intermediate states also occur in the ATPase reaction mechanism.     

Impact of profilin on actin-bound nucleotide exchange and actin polymerization dynamics

We have investigated the effects of profilin on nucleotide binding to actin and on steady state actin polymerization. The rate constants for the dissociation of ATP and ADP from monomeric Mg-actin at physiological conditions are 0.003 and 0.009 s-1, respectively. Profilin increases these dissociation rate constants to 0.08 s-1 for MgATP-actin and 1.4 s-1 for MgADP-actin. Thus, profilin can increase the rate of exchange of actin-bound ADP for ATP by 140-fold. The affinity of profilin for monomeric actin is found to be similar for MgATP-actin and MgADP-actin. Continuous sonication was used to allow study of solutions having sustained high filament end concentrations. During sonication at steady state, F-actin depolymerizes toward the critical concentration of ADP-actin [Pantaloni, D., et al. (1984)J. Biol. Chem. 259, 6274-6283], our analysis indicates that under these conditions a significant number of filaments contain terminal ADP-actin subunits. Addition of profilin to this system increases the polymer concentration and increases the steady state ATPase activity during sonication. These data are explained by the fast exchange of ATP for ADP on the profilin-ADP-actin complex, resulting in rapid ATP-actin regeneration. An important function of profilin may be to provide the growing ends of filaments with ATP-actin during periods when the monomer cycling rate exceeds the intrinsic nucleotide exchange rate of monomeric actin.     

Binding of dynein 21 S ATPase to microtubules. Effects of ionic conditions and substrate analogs

Binding of 21 S dynein ATPase isolated from Tetrahymena cilia to B subfibers of microtubule doublets was used as a model system to study dynein-tubulin interactions and their relationship to the microtubule-based sliding filament mechanism. Binding of 21 S dynein to both A and B microtubule subfibers is supported by monovalent as well as divalent ions. Monovalent cation chlorides support dynein binding to B subfibers with the specificity Li greater than Na congruent to K congruent to Rb congruent to Cs congruent to choline. The corresponding sodium or potassium halides follow the order F greater than Cl greater than Br greater than I. However, an optimal binding concentration of 40 mM KCl supports only 55% of the protein binding which takes place in 3 mM MgSO4 and does not stabilize dynein cross-bridges when whole axonemes are fixed for electron microscopy. Divalent metal ion chlorides (MgCl2, CaCl2, SrCl2, and BaCl2) have nearly equivalent effects at a concentration of 6 mM; all support about 140% of the binding observed in 6 mM MgSO4. The binding data suggest negative cooperativity or the presence of more than one class of dynein binding sites on the microtubule lattice. Low concentrations of MgATP2- induce dissociation of dynein bound to B subfibers in either 6 mM MgSO4 or 40 mM KCl. ADP, Pi, PPi, and AMP-PCH2P are unable to induce dynein dissociation, while AMP-PNHP and ATP4- both cause dynein release from B subfiber sites. The half-maximal sensitivities of the tubulin-dynein complex to MgATP2-, ATP4-, and adenylyl-imidodiphosphate (AMP.PNP) are 1.3 X 10(-8) M, 3.6 X 10(-5) M, and 4.7 X 10(-4) M respectively. Incubation of doublets or 21 S dynein in N-ethylmaleimide (NEM), which can inhibit active sliding, has no effect on either association of dynein with the B subfiber or on dissociation of the resulting dynein-B subfiber complex by MgATP2-.     

Energy-linked reactions in photosynthetic bacteria: Pi in equilibrium with HOH oxygen exchange catalyzed by the membrane-bound inorganic pyrophosphatase of Rhodospirillum rubrum

The inorganic phosphate-water oxygen exchange reaction has been studied in chromatophores of Rhodospirillum rubrum. Under appropriate conditions, chromatophores catalyzed this exchange at a rate of up to 150 μatom oxygen/h/mg bacteriochlorophyll. The reaction is largely inhibited by inhibitors of the membrane-bound inorganic pyrophosphatase, fluoride and methylene diphosphonate, and is not inhibited by oligomycin. These results indicate that the P_i ? HOH oxygen exchange is almost entirely due to the pyrophosphatase. In the presence of ADP, the exchange reaction was stimulated by about 40% and this portion of the exchange was sensitive to oligomycin, but not to fluoride or methylene diphosphonate. Thus this portion of the exchange can be attributed to the ATP synthese complex. The rates of the oxygen exchange reaction and other chromatophore-catyalyzed reactions are compared.     

Cytoplasmic dynein ATPase activity is regulated by dynactin-dependent phosphorylation

Cytoplasmic dynein is a microtubule-associated motor that utilizes ATP hydrolysis to conduct minus-end directed transport of various organelles. Dynactin is a multisubunit complex that has been proposed to both link dynein with cargo and activate dynein motor function. The mechanisms by which dynactin regulates dynein activity are not clear. In this study, we examine the role of dynactin in regulating dynein ATPase activity. We show that dynein-microtubule binding and ATP-dependent release of dynein from microtubules are reduced in dynactin null mutants, Deltaro-3 (p150(Glued)) and Deltaro-4 (Arp1), relative to wild-type. The dynein-microtubule binding activity, but not the ATP-dependent release of dynein from microtubules, is restored by in vitro mixing of extracts from dynein and dynactin mutants. Dynein produced in a Deltaro-3 mutant has approximately 8-fold reduced ATPase activity relative to dynein isolated from wild-type. However, dynein ATPase activity from wild-type is not reduced when dynactin is separated from dynein, suggesting that dynein produced in a dynactin mutant is inactivated. Treatment of dynein isolated from the Deltaro-3 mutant with lambda protein phosphatase restores the ATPase activity to near wild-type levels. The reduced dynein ATPase activity observed in dynactin null mutants is mainly due to altered affinity for ATP. Radiolabeling experiments revealed that low molecular mass proteins, particularly 20- and 8-kDa proteins, that immunoprecipitate with dynein heavy chain are hyperphosphorylated in the dynactin mutant and dephosphorylated upon lambda protein phosphatase treatment. The results suggest that cytoplasmic dynein ATPase activity is regulated by dynactin-dependent phosphorylation of dynein light chains.     

Monastrol inhibition of the mitotic kinesin Eg5

Monastrol is a small, cell-permeable molecule that arrests cells in mitosis by specifically inhibiting Eg5, a member of the Kinesin-5 family. We have used steady-state and presteady-state kinetics as well as equilibrium binding approaches to define the mechanistic basis of S-monastrol inhibition of monomeric human Eg5/KSP. In the absence of microtubules (Mts), the basal ATPase activity is inhibited through slowed product release. In the presence of microtubules, the ATPase activity is also reduced with weakened binding of Eg5 to microtubules during steady-state ATP turnover. Monastrol-treated Eg5 also shows a decreased relative affinity for microtubules under equilibrium conditions. The Mt.Eg5 presteady-state kinetics of ATP binding and the subsequent ATP-dependent isomerization are unaffected during the first ATP turnover. However, monastrol appears to stabilize a conformation that allows for reversals at the ATP hydrolysis step. Monastrol promotes a dramatic decrease in the observed rate of Eg5 association with microtubules, and ADP release is slowed without trapping the Mt.Eg5.ADP intermediate. We propose that S-monastrol binding to Eg5 induces a stable conformational change in the motor domain that favors ATP re-synthesis after ATP hydrolysis. The aberrant interactions with the microtubule and the reversals at the ATP hydrolysis step alter the ability of Eg5 to generate force, thereby yielding a nonproductive Mt.Eg5 complex that cannot establish or maintain the bipolar spindle.     

Reaction mechanism of the magnesium ion-dependent adenosine triphosphatase of frog muscle myosin and subfragment 1.

The Mg2+-dependent ATPase (adenosine 5'-triphosphatase) mechanism of myosin and subfragment 1 prepared from frog leg muscle was investigated by transient kinetic technique. The results show that in general terms the mechanism is similar to that of the rabbit skeletal-muscle myosin ATPase. During subfragment-1 ATPase activity at 0-5 degrees C pH 7.0 and I0.15, the predominant component of the steady-state intermediate is a subfragment-1-products complex (E.ADP.Pi). Binary subfragment-1-ATP (E.ATP) and subfragment-1-ADP (E.ADP) complexes are the other main components of the steady-state intermediate, the relative concentrations of the three components E.ATP, E.ADP.Pi and E.ADP being 5.5:92.5:2.0 respectively. The frog myosin ATPase mechanism is distinguished from that of the rabbit at 0-5 degrees C by the low steady-state concentrations of E.ATP and E.ADP relative to that of E.ADP.Pi and can be described by: E + ATP k' + 1 in equilibrium k' - 1 E.ATP k' + 2 in equilibrium k' - 2 E.ADP.Pi k' + 3 in equilibrium k' - 3 E.ADP + Pi k' + 4 in equilibrium k' - 4 E + ADP. In the above conditions successive forward rate constants have values: k' + 1, 1.1 X 10(5)M-1.S-1; k' + 2 greater than 5s-1; k' + 3, 0.011 s-1; k' + 4, 0.5 s-1; k'-1 is probably less than 0.006s-1. The observed second-order rate constants of the association of actin to subfragment 1 and of ATP-induced dissociation of the actin-subfragment-1 complex are 5.5 X 10(4) M-1.S-1 and 7.4 X 10(5) M-1.S-1 respectively at 2-5 degrees C and pH 7.0. The physiological implications of these results are discussed.     

Binding of magnesium to myosin subfragment-1 ATPase

Tyr 180 of chicken breast muscle alkali light chain A1 was nitrated with tetranitromethane. The nitroA1 was incorporated into chicken breast muscle subfragment-1 (S-1) by exchange with the intrinsic alkali light chain. In the presence of adenylylimidodiphosphate (AMPPNP) or ADP, the S-1 containing nitroA1 showed a difference visible absorption spectrum by Mg2+ or Ca2+. The difference spectrum has a trough around 435 nm, indicating a blue shift of the absorption spectrum due to the nitrophenol chromophore of the modified A1. The plot of delta A at 435 nm versus concentration of free Mg2+ fitted a single binding curve, independent of the total concentration of AMPPNP. These results reveal that free Mg2+ binds to the active site of S-1 ATPase, but not as Mg-AMPPNP complex. The dissociation constants of magnesium from S-1 complex were different with the two nucleotides and were 1.25 X 10(-8) M and 1.24 X 10(-7) with AMPPNP and ADP, respectively. The difference spectrum was also obtained in the presence of ATP. The delta epsilon value after adding ATP changed with the ATPase reaction. The steady state rate of S-1 ATPase was measured at various concentrations of free Mg2+. The dissociation constant of magnesium from the steady state complex, EPADP(a), was estimated as 6 X 10(-8) M. These results suggest that the affinity of magnesium at the active site of ATPase changes with the intermediate states of ATPase reaction. The affinity of calcium was lower than that of magnesium.     

Actin mediated release of ATP from a myosin-ATP complex.

The apparent second-order rate constant, ka-2, of actin binding to a myosin-ATP state (M*.ATP) and releasing ATP to the medium has been determined by two methods. The first was the measurement of the amount of ATP released when actin was added to the intermediate state, M*.ATP; the second was the measurement of oxygen exchange between ATP and HOH. A quantitative treatment of ATP in equilibrium HOH exchange is given to allow extraction of elementary rate constants from the data. Agreement between the two methods was good and at low ionic strength and 23 degrees C, ka-2 is 6 X 10(5) M-1 s-1 which is about one-third the value of the apparent second-order rate constant, ka4, of actin binding to the myosin product state (M**.ADP.Pi). The determination of ka-2 allows a lower limit of 6 s-1 to be placed upon the first-order rate of ATP release from AM.ATP. This is to be compared with a value of less than or equal to 1.5 X 10(-4) s-1 for the equivalent steps of the myosin scheme; thus actin enhances the rate by a factor of 4 X 10(4) or more. A greater proportion of the bound ATP is released to the medium as ATP with increasing actin concentration. This reflects the contribution to rate limitation at saturating actin concentration of steps between myosin states dissociated from actin.