AB-QTL analysis in winter wheat: I. Synthetic hexaploid wheat (<Emphasis Type="Italic">T. turgidum</Emphasis> ssp. <Emphasis Type="Italic">dicoccoides </Emphasis> × <Emphasis Type="Italic">T. tauschii</Emphasis>) as a source of favourable alleles for milling and baking quality traits

The advanced backcross QTL (AB-QTL) strategy was utilised to locate quantitative trait loci (QTLs) for baking quality traits in two BC₂F₃ populations of winter wheat. The backcrosses are derived from two German winter wheat cultivars, Batis and Zentos, and two synthetic, hexaploid wheat accessions, Syn022 and Syn086. The synthetics originate from hybridisations of wild emmer (T. turgidum spp. dicoccoides) and T. tauschii, rather than from durum wheat and T. tauschii and thus allowed for the first time to test for exotic QTL effects on wheat genomes A and B in addition to genome D. The investigated quality traits comprised hectolitre weight, grain hardness, flour yield Type 550, falling number, grain protein content, sedimentation volume and baking volume. One hundred and forty-nine SSR markers were applied to genotype a total of 400 BC₂F₃ lines. For QTL detection, a mixed-model ANOVA was conducted, including the effects DNA marker, BC₂F₃ line, environment and marker × environment interaction. Overall 38 QTLs significant for a marker main effect were detected. The exotic allele improved trait performance at 14 QTLs (36.8%), while the elite genotype contributed the favourable effect at 24 QTLs (63.2%). The favourable exotic alleles were mainly associated with grain protein content, though the greatest improvement of trait performance due to the exotic alleles was achieved for the traits falling number and sedimentation volume. At the QTL on chromosome 4B the exotic allele increased the falling number by 19.6% and at the QTL on chromosome 6D the exotic allele led to an increase of the sedimentation volume by 21.7%. The results indicate that synthetic wheat derived from wild emmer × T. tauschii carries favourable QTL alleles for baking quality traits, which might be useful for breeding improved wheat varieties by marker-assisted selection.     

Molecular detection of QTLs for agronomic and quality traits in a doubled haploid population derived from two Canadian wheats (Triticum aestivum L.)

Development of high-yielding wheat varieties with good end-use quality has always been a major concern for wheat breeders. To genetically dissect quantitative trait loci (QTLs) for yield-related traits such as grain yield, plant height, maturity, lodging, test weight and thousand-grain weight, and for quality traits such as grain and flour protein content, gluten strength as evaluated by mixograph and SDS sedimentation volume, an F₁-derived doubled haploid (DH) population of 185 individuals was developed from a cross between a Canadian wheat variety “AC Karma” and a breeding line 87E03-S2B1. A genetic map was constructed based on 167 marker loci, consisting of 160 microsatellite loci, three HMW glutenin subunit loci: Glu-A1, Glu-B1 and Glu-D1, and four STS-PCR markers. Data for investigated traits were collected from three to four environments in Manitoba, Canada. QTL analyses were performed using composite interval mapping. A total of 50 QTLs were detected, 24 for agronomic traits and 26 for quality-related traits. Many QTLs for correlated traits were mapped in the same genomic regions forming QTL clusters. The largest QTL clusters, consisting of up to nine QTLs, were found on chromosomes 1D and 4D. HMW glutenin subunits at Glu-1 loci had the largest effect on breadmaking quality; however, other genomic regions also contributed genetically to breadmaking quality. QTLs detected in the present study are compared with other QTL analyses in wheat.     

Genomic regions for yield and yield parameters in Chinese winter wheat (Triticum aestivum L.) genotypes tested under varying environments correspond to QTL in widely different wheat materials

Field trials with a population of 108 doubled haploid (DH) lines of bread wheat (Triticum aestivum L.) derived from a cross between the Chinese winter wheat cultivars CA9613 and H1488 were carried out at Beijing (China) in 2000/2001 and 2001/2002. In addition, a field trial and a pot experiment were carried out at the experimental field stations of Giessen University (Germany) in the vegetation periods 2004/2005 and 2006/2007. Phenotypic data for major agronomic yield-related traits, i.e. grain weight per ear (GWE), grain number per ear (GNE), plant height and thousand-grain weight (TGW), were recorded in all experiments. In addition, biomass weight per tiller and ear weight were evaluated in the two field trials at Beijing. Based on the phenotypic data and a genetic map comprising 168 SSR markers, an analysis of quantitative trait loci (QTL) was carried out for yield and yield parameters using the composite interval mapping (CIM) approach. A total of 30 QTL were detected for these traits across four environments. Five of these QTL located on chromosomes 1A, 1B, 2B, 2D and 7D exhibited pleiotropic effects. Such pleiotropic gene loci will be very useful for understanding the homologous/homeologous relationships among QTL and designing an appropriate marker-assisted breeding programme including multi-trait selection in order to accumulate (“pyramide”) favorable alleles at different genetic loci.     

A genome‐wide association study of 23 agronomic traits in Chinese wheat landraces

Uncovering the genetic basis of agronomic traits in wheat landraces is important for ensuring global food security via the development of improved varieties. Here, 723 wheat landraces from 10 Chinese agro‐ecological zones were evaluated for 23 agronomic traits in six environments. All accessions could be clustered into five subgroups based on phenotypic data via discriminant function analysis, which was highly consistent with genotypic classification. A genome‐wide association study was conducted for these traits using 52 303 DArT‐seq markers to identify marker‐trait associations and candidate genes. Using both the general linear model and the mixed linear model, 149 significant markers were identified for 21 agronomic traits based on best linear unbiased prediction values. Considering the linkage disequilibrium decay distance in this study, significant markers within 10 cM were combined as a quantitative trait locus (QTL), with a total of 29 QTL identified for 15 traits. Of these, five QTL for heading date, flag leaf width, peduncle length, and thousand kernel weight had been reported previously. Twenty‐five candidate genes associated with significant markers were identified. These included the known vernalization genes VRN‐B1 and vrn‐B3 and the photoperiod response genes Ppd and PRR. Overall, this study should be helpful in elucidating the underlying genetic mechanisms of complex agronomic traits and performing marker‐assisted selection in wheat.     

Novel and favorable QTL allele clusters for end-use quality revealed by introgression lines derived from synthetic wheat

Wheat quality is an important target trait. Previous studies mainly focus on storage protein, but their contribution to quality is partial, and most loci for quality are still undetected. Wild species of wheat are valuable resources for wheat improvement and introgression lines (ILs) are the ideal materials for detecting quantitative trait loci (QTL). In this study, a set of 82 BC5 F2-6 ILs, carrying a range of introgressed chromosome segments from a synthetic hexaploid wheat Am3 (Triticum carthlicum × Aegilops tauschii), was developed and genotyped with 170 microsatellite markers. QTL analysis was performed for 14 parameters, sodium dodecyl sulfate sedimentation volume, grain protein content (GPC), grain hardness and 11 mixograph parameters, associated with end-use quality of wheat, using the materials harvested in three environments. This led to the detection of 116 QTL, with c. 95% of the positive alleles contributed by Am3. Six important and novel genomic regions for bread-making quality were found on chromosomes 2D, 3A, 4A, 4B, 5A and 6A. These loci for bread-making quality showed pleiotropy and had large positive effects on several quality parameters with no or very weak negative effect on grain yield, thus demonstrating the value of synthetic wheat as a source of useful genetic variation for the improvement of bread wheat quality.     

Advanced backcross QTL analysis in progenies derived from a cross between a German elite winter wheat variety and a synthetic wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis>L.)

We report here the second advanced backcross quantitative trait locus (AB-QTL) analysis carried out in winter wheat. Seven agronomic traits were studied in a BC₂F₁population derived from a cross between the German winter wheat variety Flair and the synthetic wheat line XX86 developed in Japan. We selected 111 BC₂F₁ lines and genotyped these with 197 microsatellite markers. Field data for seven agronomic traits were collected from corresponding BC₂F₃ families that were grown at up to six locations in Germany. QTL analyses for yield and yield components were performed using single-marker regression and interval mapping. A total of 57 putative QTLs derived from XX86 were detected, of which 24 (42.1%) were found to have a positive effect from the synthetic wheat XX86. These favourable QTLs were mainly associated with thousand-grain weight and grain weight per ear. Many QTLs for correlated traits were mapped in similar chromosomal regions. The AB-QTL data obtained in the present study are discussed and compared with results from previous QTL analyses.     

The genetic control of milling yield, dough rheology and baking quality of wheat

Improving the end-use quality of wheat is a key target for many breeding programmes. With the exception of the relationship between glutenin alleles and some dough rheological characters, knowledge concerning the genetic control of wheat quality traits is somewhat limited. A doubled haploid population produced from a cross between two Australian cultivars ‘Trident’ and ‘Molineux’ has been used to construct a linkage map based largely on microsatellite molecular makers. ‘Molineux’ is superior to ‘Trident’ for a number of milling, dough rheology and baking quality characteristics, although by international standards ‘Trident’ would still be regarded as possessing moderately good end-use quality. This population was therefore deemed useful for investigation of wheat end-use quality. A number of significant QTL identified for dough rheological traits mapped to HMW and LMW glutenin loci on chromosomes 1A and 1B. However, QTL associated with dough strength and loaf volume were also identified on chromosome 2A and a significant QTL associated with loaf volume and crumb quality was identified on chromosome 3A. A QTL for flour protein content and milling yield was identified on chromosome 6A and a QTL associated with flour colour reported previously on chromosome 7B was confirmed in this population. The detection of loci affecting dough strength, loaf volume and flour protein content may provide fresh opportunities for the application of marker-assisted selection to improve bread-making quality.     

Mapping quantitative trait loci for quality factors in an inter-class cross of US and Chinese wheat

Wheat quality factors are critical in determining the suitability of wheat (Triticum aestivum L.) for end-use product and economic value, and they are prime targets for marker-assisted selection. Objectives of this study were to identify quantitative trait loci (QTLs) that ultimately influence wheat market class and milling quality. A population of 132 F₁₂ recombinant inbred lines (RILs) was derived by single-seed descent from a cross between the Chinese hard wheat line Ning7840 and the soft wheat cultivar Clark and grown at three Oklahoma locations from 2001 to 2003. Milling factors such as test weight (volumetric grain weight, TW), kernel weight (KW), and kernel diameter (KD) and market class factors such as wheat grain protein content (GPC) and kernel hardness index (HI) were characterized on the basis of a genetic map constructed from 367 SSR and 241 AFLP markers covering all 21 chromosomes. Composite interval mapping identified eight QTLs for TW, seven for KW, six for KD, two each for GPC and HI measured by near-infrared reflectance (NIR) spectroscopy, and four for HI measured by single kernel characterization system. Positive phenotypic correlations were found among milling factors. Consistent co-localized QTLs were identified for TW, KW, and KD on the short arms of chromosomes 5A and 6A. A common QTL was identified for TW and KD on the long arm of chromosome 5A. A consistent major QTL for HI peaked at the Pinb-D1 locus on the short arm of chromosome 5D and explained up to 85% of the phenotypic variation for hardness. We identified QTLs for GPC on 4B and the short arm of 3A chromosomes. The consistency of quality factor QTLs across environments reveals their potential for marker-assisted selection.     

QTL for body weight,morphometric traits and stress response in European sea bass Dicentrarchus labrax

Natural mating and mass spawning in the European sea bass (Dicentrarchus labrax L., Moronidae, Teleostei) complicate genetic studies and the implementation of selective breeding schemes. We utilized a two‐step experimental design for detecting QTL in mass‐spawning species: 2122 offspring from natural mating between 57 parents (22 males, 34 females and one missing) phenotyped for body weight, eight morphometric traits and cortisol levels, had been previously assigned to parents based on genotypes of 31 DNA microsatellite markers. Five large full‐sib families (five sires and two dams) were selected from the offspring (570 animals), which were genotyped with 67 additional markers. A new genetic map was compiled, specific to our population, but based on the previously published map. QTL mapping was performed with two methods: half‐sib regression analysis (paternal and maternal) and variance component analysis accounting for all family relationships. Two significant QTL were found for body weight on linkage group 4 and 6, six significant QTL for morphometric traits on linkage groups 1B, 4, 6, 7, 15 and 23 and three suggestive QTL for stress response on linkage groups 3, 14 and 23. The QTL explained between 8% and 38% of phenotypic variance. The results are the first step towards identifying genes involved in economically important traits like body weight and stress response in European sea bass.     

Quantitative trait loci analysis of a Duroc commercial population highlights differences in the genetic determination of meat quality traits at two different muscles

We performed a whole‐genome scan with 110 informative microsatellites in a commercial Duroc population for which growth, fatness, carcass and meat quality phenotypes were available. Importantly, meat quality traits were recorded in two different muscles, that is, gluteus medius (GM) and longissimus thoracis et lumborum (LTL), to find out whether these traits are determined by muscle‐specific genetic factors. At the whole‐population level, three genome‐wide QTL were identified for carcass weight (SSC7, 60 cM), meat redness (SSC13, 84 cM) and yellowness (SSC15, 108 cM). Within‐family analyses allowed us to detect genome‐wide significant QTL for muscle loin depth between the 3rd and 4th ribs (SSC15, 54 cM), backfat thickness (BFT) in vivo (SSC10, 58 cM), ham weight (SSC9, 69 cM), carcass weight (SSC7, 60 cM; SSC9, 68 cM), BFT on the last rib (SSC11, 48 cM) and GM redness (SSC8, 85 cM; SSC13, 84 cM). Interestingly, there was low positional concordance between meat quality QTL maps obtained for GM and LTL. As a matter of fact, the three genome‐wide significant QTL for colour traits (SSC8, SSC13 and SSC15) that we detected in our study were all GM specific. This result suggests that QTL effects might be modulated to a certain extent by genetic and environmental factors linked to muscle function and anatomical location.     

Identification of genetic factors controlling kernel hardness and related traits in a recombinant inbred population derived from a soft × ‘extra-soft’ wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) cross

Kernel hardness or texture, used to classify wheat (Triticum aestivum L.) into soft and hard classes, is a major determinant of milling and baking quality. Wheat genotypes in the soft class that are termed ‘extra-soft’ (with kernel hardness in the lower end of the spectrum) have been associated with superior end-use quality. In order to better understand the relationship between kernel hardness, milling yield, and various agronomic traits, we performed quantitative trait mapping using a recombinant inbred line population derived from a cross between a common soft wheat line and a genotype classified as an ‘extra-soft’ line. A total of 47 significant quantitative trait loci (QTL) (LOD ≥ 3.0) were identified for nine traits with the number of QTL affecting each trait ranging from three to nine. The percentage of phenotypic variance explained by these QTL ranged from 3.7 to 50.3%. Six QTL associated with kernel hardness and break flour yield were detected on chromosomes 1BS, 4BS, 5BS, 2DS, 4DS, and 5DL. The two most important QTL were mapped onto orthologous regions on chromosomes 4DS (Xbarc1118–Rht-D1) and 4BS (Xwmc617–Rht-B1). These results indicated that the ‘extra-soft’ characteristic was not controlled by the Hardness (Ha) locus on chromosome 5DS. QTL for eight agronomic traits occupied two genomic regions near semi-dwarf genes Rht-D1 on chromosome 4DS and Rht-B1 on chromosome 4BS. The clustering of these QTL is either due to the pleiotropic effects of single genes or tight linkage of genes controlling these various traits.     

Characterization of a major QTL for adult plant resistance to stripe rust in US soft red winter wheat

Stripe rust, caused by Puccinia striiformis f. sp. tritici, is an important disease of soft red winter wheat in the eastern region of the USA. Pioneer 26R61 has provided effective resistance to stripe rust for 10 years. To elucidate the genetic basis of the resistance, a mapping population of 178 recombinant inbred lines (RILs) was developed using single-seed descent from a cross between Pioneer 26R61 and the susceptible cultivar AGS 2000. A genetic map with 895 markers covering all 21 chromosomes was used for QTL analysis. One major QTL was detected, explaining up to 56.0% of the mean phenotypic variation, flanked by markers Xbarc124 and Xgwm359, and assigned to the distal 22% of the short arm of wheat chromosome 2A. Evidence showed that it was different from Yr17 derived from Ae. ventricosa, the only formally named Yr gene in 2AS, and the QTL was temporarily designated as YrR61. In addition, a minor QTL, QYr.uga-6AS, probably conditioned high-temperature adult plant resistance. The QTL explained 6–7% of the trait variation. Preliminary test of the flanking markers for YrR61, in two cultivars and two promising breeding lines with Pioneer 26R61 in their pedigree, indicated that YrR61 was present in these cultivars and lines, and these markers could therefore be used in marker-assisted selection.     

Identification of QTLs for resistance to Fusarium head blight, DON accumulation and associated traits in the winter wheat variety Arina

Fusarium head blight (FHB) of wheat has become a serious threat to wheat crops in numerous countries. In addition to loss of yield and quality, this disease is of primary importance because of the contamination of grain with mycotoxins such as deoxynivalenol (DON). The Swiss winter cultivar Arina possesses significant resistance to FHB. The objective of this study was to map quantitative trait loci (QTL) for resistance to FHB, DON accumulation and associated traits in grain in a double haploid (DH) population from a cross between Arina and the FHB susceptible UK variety Riband. FHB resistance was assessed in five trials across different years and locations. Ten QTL for resistance to FHB or associated traits were detected across the trials, with QTL derived from both parents. Very few of the QTL detected in this study were coincident with those reported by authors of two other studies of FHB resistance in Arina. It is concluded that the FHB resistance of Arina, like that of the other European winter wheat varieties studied to date, is conferred by several genes of moderate effect making it difficult to exploit in marker-assisted selection breeding programmes. The most significant and stable QTL for FHB resistance was on chromosome 4D and co-localised with the Rht–D1 locus for height. This association appears to be due to linkage of deleterious genes to the Rht-D1b (Rht2) semi-dwarfing allele rather than differences in height per se. This association may compromise efforts to enhance FHB resistance in breeding programmes using germplasm containing this allele.     

QTL mapping for grain filling rate and yield-related traits in RILs of the Chinese winter wheat population Heshangmai × Yu8679

A set of 142 winter wheat recombinant inbred lines (RILs) deriving from the cross Heshangmai x Yu8679 were tried in four ecological environments during the seasons 2006 and 2007. Nine agronomic traits comprising mean grain filling rate (GFR(mean)), maximum grain filling rate (GFR(max)), grain filling duration (GFD), grain number per ear (GNE), grain weight per ear (GWE), flowering time (FT), maturation time (MT), plant height (PHT) and thousand grain weight (TGW) were evaluated in Beijing (2006 and 2007), Chengdu (2007) and Hefei (2007). A genetic map comprising 173 SSR markers and two EST markers was generated. Based on the genetic map and phenotypic data, quantitative trait loci (QTL) were mapped for these agronomic traits. A total of 99 putative QTLs were identified for the nine traits over four environments except GFD, PHT and MT, measured in two environments (BJ07 and CD07), respectively. Of the QTL detected, 17 for GFR(mean), 16 for GFR(max), 21 for TGW and 10 for GWE involving the chromosomes 1A, 1B, 2A, 2D, 3A, 3B, 3D, 4A, 4D, 5A, 5B, 6D and 7D were identified. Moreover, 13 genomic regions showing pleiotropic effects were detected in chromosomes 1A, 1B, 1D, 2A, 2B, 2D, 3A, 3B, 4B, 4D, 5B, 6D and 7D; these QTL revealing pleiotropic effects may be informative for a better understanding of the genetic basis of grain filling rate and other yield-related traits, and represent potential targets for multi-trait marker aided selection in wheat.     

Fine mapping of the region on wheat chromosome 7D controlling grain weight

We report the fine mapping of the previously described quantitative trait loci (QTL) for grain weight QTgw.ipk-7D associated with microsatellite marker Xgwm1002-7D by using introgression lines (ILs) carrying introgressions of the synthetic wheat W-7984 in the genetic background of the German winter wheat variety ‘Prinz’. The BC₄F₃ ILs had a 10% increased thousand grain weight compared to the control group and the recurrent parent ‘Prinz’, and 84.7% of the phenotypic variance could be explained by the segregation of marker Xgwm1002-7D, suggesting the presence of a gene modulating grain weight, which was preliminarily designated gw1. It was possible to delimit the QTL QTgw.ipk-7D to the interval Xgwm295–Xgwm1002, which is located in the most telomeric bin 7DS4-0.61-1.00 in the physical map of wheat chromosome arm 7DS. Furthermore, our data suggest the presence of a novel plant height-reducing locus Rht on chromosome arm 7DS of ‘Prinz’. Larger grain and increased plant height may reflect the pleiotropic action of one gene or may be caused by two linked genes. In general, our data support the concept of using nearly isogenic ILs for validating and dissecting QTLs into single Mendelian genes and open the gateway for map-based cloning of a grain-weight QTL in wheat.     

Quantitative Trait Loci Associated with Phenological Development,Low-Temperature Tolerance,Grain Quality,and Agronomic Characters in Wheat (Triticum aestivum L.)

Plants must respond to environmental cues and schedule their development in order to react to periods of abiotic stress and commit fully to growth and reproduction under favorable conditions. This study was initiated to identify SNP markers for characters expressed from the seedling stage to plant maturity in spring and winter wheat (Triticum aestivum L.) genotypes adapted to western Canada. Three doubled haploid populations with the winter cultivar ‘Norstar’ as a common parent were developed and genotyped with a 90K Illumina iSelect SNP assay and a 2,998.9 cM consensus map with 17,541 markers constructed. High heritability’s reflected large differences among the parents and relatively low genotype by environment interactions for all characters considered. Significant QTL were detected for the 15 traits examined. However, different QTL for days to heading in controlled environments and the field provided a strong reminder that growth and development are being orchestrated by environmental cues and caution should be exercised when extrapolating conclusions from different experiments. A QTL on chromosome 6A for minimum final leaf number, which determines the rate of phenological development in the seedling stage, was closely linked to QTL for low-temperature tolerance, grain quality, and agronomic characters expressed up to the time of maturity. This suggests phenological development plays a critical role in programming subsequent outcomes for many traits. Transgressive segregation was observed for the lines in each population and QTL with additive effects were identified suggesting that genes for desirable traits could be stacked using Marker Assisted Selection. QTL were identified for characters that could be transferred between the largely isolated western Canadian spring and winter wheat gene pools demonstrating the opportunities offered by Marker Assisted Selection to act as bridges in the identification and transfer of useful genes among related genetic islands while minimizing the drag created by less desirable genes.     

Advanced backcross QTL mapping of resistance to Fusarium head blight and plant morphological traits in a <Emphasis Type="Italic">Triticum macha</Emphasis> × <Emphasis Type="Italic">T. aestivum</Emphasis> population

While many reports on genetic analysis of Fusarium head blight (FHB) resistance in bread wheat have been published during the past decade, only limited information is available on FHB resistance derived from wheat relatives. In this contribution, we report on the genetic analysis of FHB resistance derived from Triticum macha (Georgian spelt wheat). As the origin of T. macha is in the Caucasian region, it is supposed that its FHB resistance differs from other well-investigated resistance sources. To introduce valuable alleles from the landrace T. macha into a modern genetic background, we adopted an advanced backcross QTL mapping scheme. A backcross-derived recombinant-inbred line population of 321 BC₂F₃ lines was developed from a cross of T. macha with the Austrian winter wheat cultivar Furore. The population was evaluated for Fusarium resistance in seven field experiments during four seasons using artificial inoculations. A total of 300 lines of the population were genetically fingerprinted using SSR and AFLP markers. The resulting linkage map covered 33 linkage groups with 560 markers. Five novel FHB-resistance QTL, all descending from T. macha, were found on four chromosomes (2A, 2B, 5A, 5B). Several QTL for morphological and developmental traits were mapped in the same population, which partly overlapped with FHB-resistance QTL. Only the 2BL FHB-resistance QTL co-located with a plant height QTL. The largest-effect FHB-resistance QTL in this population mapped at the spelt-type locus on chromosome 5A and was associated with the wild-type allele q, but it is unclear whether q has a pleiotropic effect on FHB resistance or is closely linked to a nearby resistance QTL.     

A multiparental cross population for mapping QTL for agronomic traits in durum wheat (Triticum turgidum ssp. durum)

Multiparental cross designs for mapping quantitative trait loci (QTL) provide an efficient alternative to biparental populations because of their broader genetic basis and potentially higher mapping resolution. We describe the development and deployment of a recombinant inbred line (RIL) population in durum wheat (Triticum turgidum ssp. durum) obtained by crossing four elite cultivars. A linkage map spanning 2664 cM and including 7594 single nucleotide polymorphisms (SNPs) was produced by genotyping 338 RILs. QTL analysis was carried out by both interval mapping on founder haplotype probabilities and SNP bi‐allelic tests for heading date and maturity date, plant height and grain yield from four field experiments. Sixteen QTL were identified across environments and detection methods, including two yield QTL on chromosomes 2BL and 7AS, with the former mapped independently from the photoperiod response gene Ppd‐B1, while the latter overlapped with the vernalization locus VRN‐A3. Additionally, 21 QTL with environment‐specific effects were found. Our results indicated a prevalence of environment‐specific QTL with relatively small effect on the control of grain yield. For all traits, functionally different QTL alleles in terms of direction and size of genetic effect were distributed among parents. We showed that QTL results based on founder haplotypes closely matched functional alleles at known heading date loci. Despite the four founders, only 2.1 different functional haplotypes were estimated per QTL, on average. This durum wheat population provides a mapping resource for detailed genetic dissection of agronomic traits in an elite background typical of breeding programmes.     

亚麻主要农艺与品质相关性状的QTL定位

为了全面了解亚麻产量和品质相关性状的遗传基础,为亚麻基因克隆和分子标记辅助育种提供理论依据,在已构建SNP连锁遗传图谱的基础上,以LH-89为父本,R43为母本构建F2:3家系QTL定位群体,用R/QTL软件采用复合区间作图法对13个农艺和品质性状进行QTL定位。结果表明:(1)该研究共检测出35个QTL位点,与粗脂肪及其组成成分相关的QTL有20个,与农艺性状相关的QTL有15个;其中:亚油酸和粗脂肪各5个,亚麻酸、千粒重各4个,棕榈酸、株高、工艺长度各3个,硬脂酸、分枝数各2个,单株果数、果粒数、单株粒重、油酸各1个。(2)共有18个QTL的表型贡献率超10%(主效基因),其中农艺性状定位8个主效基因,品质性状定位10个主效基因。     

Mapping of main and epistatic effect QTLs associated to grain protein and gluten strength using a RIL population of durum wheat

Quality, specifically protein content and gluten strength are among the main objectives of a durum wheat breeding program. The aim of this work was to validate quantitative trait loci (QTLs) associated with grain protein content (GPC) and gluten strength measured by SDS sedimentation volume (SV) and to find additional QTLs expressed in Argentinean environments. Also, epistatic QTL and QTL x environmental interactions were analyzed. A mapping population of 93 RILs derived from the cross UC1113 x Kofa showing extreme values in gluten quality was used. Phenotypic data were collected along six environments (three locations, two years). Main effect QTLs associated with GPC were found in equivalent positions in two environments on chromosomes 3BS (R² = 21.0-21.6%) and 7BL (R² = 12.1-13%), and in one environment on chromosomes 1BS, 2AL, 2BS, 3BL, 4AL, 5AS, 5BL and 7AS. The most important and stable QTL affecting SV was located on chromosome 1BL (Glu-B1) consistently detected over the six environments (R² = 20.9- 54.2%). Additional QTLs were found in three environments on chromosomes 6AL (R² = 6.4-12.5%), and in two environments on chromosomes 6BL (R² = 11.5-12.1%), 7AS (R² = 8.2-10.2%) and 4BS (R² = 11–16.4%). In addition, pleiotropic effects were found affecting grain yield, test weight, thousand-kernel- weight and days to heading in some of these QTLs. Epistatic QTLs and QTL x environment interactions were found for both quality traits, mostly for GPC. The flanking markers of the QTLs detected in this work could be efficient tools to select superior genotypes for the mentioned traits.