Flightin is a myosin rod binding protein

The assembly of striated muscle myosin into thick filaments of precise and regular length requires the assistance of accessory proteins. Drosophila indirect flight muscle (IFM) contain flightin, a 20-kDa protein that has been shown to be essential for flight, for maintenance of sarcomeric integrity in active muscle, and informative in length determination of thick filaments during IFM development. Additionally, a point mutation in the myosin rod (Mhc ¹³) negates flightin accumulation in the IFM in vivo. The manner in which flightin interacts with thick filaments is not known. Here, two different solid-state binding assays demonstrate that flightin binds to myosin and to a recombinant fragment of the myosin rod that include the COOH-terminal 600 amino acids (zone 19 to tail piece). The interaction of flightin and myosin is abolished by the single amino acid substitution in Mhc ¹³ at position 1e of zone 27 of the red (residue 1554). The molar ratio of flightin to myosin is approx 1∶1 to 1∶2. Thus, the instability of thick filaments, seen in vivo in the absence of flightin suggests that the flightin-myosin interaction is critical for maintaining sarcomere integrity in active muscle.     

Flightin is essential for thick filament assembly and sarcomere stability in Drosophila flight muscles

Flightin is a multiply phosphorylated, 20-kD myofibrillar protein found in Drosophila indirect flight muscles (IFM). Previous work suggests that flightin plays an essential, as yet undefined, role in normal sarcomere structure and contractile activity. Here we show that flightin is associated with thick filaments where it is likely to interact with the myosin rod. We have created a null mutation for flightin, fln(0), that results in loss of flight ability but has no effect on fecundity or viability. Electron microscopy comparing pupa and adult fln(0) IFM shows that sarcomeres, and thick and thin filaments in pupal IFM, are 25-30% longer than in wild type. fln(0) fibers are abnormally wavy, but sarcomere and myotendon structure in pupa are otherwise normal. Within the first 5 h of adult life and beginning of contractile activity, IFM fibers become disrupted as thick filaments and sarcomeres are variably shortened, and myofibrils are ruptured at the myotendon junction. Unusual empty pockets and granular material interrupt the filament lattice of adult fln(0) sarcomeres. Site-specific cleavage of myosin heavy chain occurs during this period. That myosin is cleaved in the absence of flightin is consistent with the immunolocalization of flightin on the thick filament and biochemical and genetic evidence suggesting it is associated with the myosin rod. Our results indicate that flightin is required for the establishment of normal thick filament length during late pupal development and thick filament stability in adult after initiation of contractile activity.     

DAAM Is Required for Thin Filament Formation and Sarcomerogenesis during Muscle Development in Drosophila

During muscle development, myosin and actin containing filaments assemble into the highly organized sarcomeric structure critical for muscle function. Although sarcomerogenesis clearly involves the de novo formation of actin filaments, this process remained poorly understood. Here we show that mouse and Drosophila members of the DAAM formin family are sarcomere-associated actin assembly factors enriched at the Z-disc and M-band. Analysis of dDAAM mutants revealed a pivotal role in myofibrillogenesis of larval somatic muscles, indirect flight muscles and the heart. We found that loss of dDAAM function results in multiple defects in sarcomere development including thin and thick filament disorganization, Z-disc and M-band formation, and a near complete absence of the myofibrillar lattice. Collectively, our data suggest that dDAAM is required for the initial assembly of thin filaments, and subsequently it promotes filament elongation by assembling short actin polymers that anneal to the pointed end of the growing filaments, and by antagonizing the capping protein Tropomodulin.     

Suppression of muscle hypercontraction by mutations in the myosin heavy chain gene of Drosophila melanogaster

The indirect flight muscles (IFM) of Drosophila melanogaster provide a good genetic system with which to investigate muscle function. Flight muscle contraction is regulated by both stretch and Ca(2+)-induced thin filament (actin + tropomyosin + troponin complex) activation. Some mutants in troponin-I (TnI) and troponin-T (TnT) genes cause a "hypercontraction" muscle phenotype, suggesting that this condition arises from defects in Ca(2+) regulation and actomyosin-generated tension. We have tested the hypothesis that missense mutations of the myosin heavy chain gene, Mhc, which suppress the hypercontraction of the TnI mutant held-up(2) (hdp(2)), do so by reducing actomyosin force production. Here we show that a "headless" Mhc transgenic fly construct that reduces the myosin head concentration in the muscle thick filaments acts as a dose-dependent suppressor of hypercontracting alleles of TnI, TnT, Mhc, and flightin genes. The data suggest that most, if not all, mutants causing hypercontraction require actomyosin-produced forces to do so. Whether all Mhc suppressors act simply by reducing the force production of the thick filament is discussed with respect to current models of myosin function and thin filament activation by the binding of calcium to the troponin complex.     

Flightin Is Necessary for Length Determination, Structural Integrity, and Large Bending Stiffness of Insect Flight Muscle Thick Filaments

Despite the fundamental role of thick filaments in muscle contraction, little is known about the mechanical behavior of these filaments and how myosin-associated proteins dictate differences between muscle types. In this study, we used atomic force microscopy to study the morphological and mechanical properties of fully hydrated native thick filaments isolated from indirect flight muscle (IFM) of normal and mutant Drosophila lacking flightin (fln⁰). IFM thick filaments from newly eclosed (0-1 h old) wild-type flies have a mean length of 3.04 ± 0.05 μm. In contrast, IFM thick filaments from newly eclosed fln⁰ flies are more variable in length and, on average, are significantly longer (3.90 ± 1.33 μm) than wild-type filaments from flies of the same age. In the absence of flightin, thick filaments can attain lengths > 300% of wild-type filaments, indicating that flightin is required for setting the proper filament length in vivo. Filaments lacking flightin are structurally compromised, and filament preparations from fully matured 3- to 5-day-old adult fln⁰ IFM yielded fragments of variable length much shorter than 3.20 ± 0.04 μm, the length obtained from wild-type flies of similar age. The persistence length, an index of bending stiffness, was calculated from measurements of filament end-to-end length and contour length. We show that the presence of flightin increases persistence length by more than 40% and that wild-type filaments increase in stiffness with age. These results indicate that flightin fulfills an essential role in defining the structural and mechanical properties of IFM thick filaments.     

Thin filaments elongate from their pointed ends during myofibril assembly in Drosophila indirect flight muscle.

Tropomodulin (Tmod) is an actin pointed-end capping protein that regulates actin dynamics at thin filament pointed ends in striated muscle. Although pointed-end capping by Tmod controls thin filament lengths in assembled myofibrils, its role in length specification during de novo myofibril assembly is not established. We used the Drosophila Tmod homologue, sanpodo (spdo), to investigate Tmod's function during muscle development in the indirect flight muscle. SPDO was associated with the pointed ends of elongating thin filaments throughout myofibril assembly. Transient overexpression of SPDO during myofibril assembly irreversibly arrested elongation of preexisting thin filaments. However, the lengths of thin filaments assembled after SPDO levels had declined were normal. Flies with a preponderance of abnormally short thin filaments were unable to fly. We conclude that: (a) thin filaments elongate from their pointed ends during myofibril assembly; (b) pointed ends are dynamically capped at endogenous levels of SPDO so as to allow elongation; (c) a transient increase in SPDO levels during myofibril assembly converts SPDO from a dynamic to a permanent cap; and (d) developmental regulation of pointed-end capping during myofibril assembly is crucial for specification of final thin filament lengths, myofibril structure, and muscle function.     

Mutations in Drosophila myosin rod cause defects in myofibril assembly

The roles of myosin during muscle contraction are well studied, but how different domains of this protein are involved in myofibril assembly in vivo is far less understood. The indirect flight muscles (IFMs) of Drosophila melanogaster provide a good model for understanding muscle development and function in vivo. We show that two missense mutations in the rod region of the myosin heavy-chain gene, Mhc, give rise to IFM defects and abnormal myofibrils. These defects likely result from thick filament abnormalities that manifest during early sarcomere development or later by hypercontraction. The thick filament defects are accompanied by marked reduction in accumulation of flightin, a myosin binding protein, and its phosphorylated forms, which are required to stabilise thick filaments. We investigated with purified rod fragments whether the mutations affect the coiled-coil structure, rod aggregate size or rod stability. No significant changes in these parameters were detected, except for rod thermodynamic stability in one mutation. Molecular dynamics simulations suggest that these mutations may produce localised rod instabilities. We conclude that the aberrant myofibrils are a result of thick filament defects, but that these in vivo effects cannot be detected in vitro using the biophysical techniques employed. The in vivo investigation of these mutant phenotypes in IFM development and function provides a useful platform for studying myosin rod and thick filament formation generically, with application to the aetiology of human myosin rod myopathies.     

Actin-facilitated assembly of smooth muscle myosin induces formation of actomyosin fibrils

To identify regulatory mechanisms potentially involved in formation of actomyosin structures in smooth muscle cells, the influence of F-actin on smooth muscle myosin assembly was examined. In physiologically relevant buffers, AMPPNP binding to myosin caused transition to the soluble 10S myosin conformation due to trapping of nucleotide at the active sites. The resulting 10S myosin-AMPPNP complex was highly stable and thick filament assembly was suppressed. However, upon addition to F-actin, myosin readily assembled to form thick filaments. Furthermore, myosin assembly caused rearrangement of actin filament networks into actomyosin fibers composed of coaligned F-actin and myosin thick filaments. Severin-induced fragmentation of actin in actomyosin fibers resulted in immediate disassembly of myosin thick filaments, demonstrating that actin filaments were indispensable for mediating myosin assembly in the presence of AMPPNP. Actomyosin fibers also formed after addition of F-actin to nonphosphorylated 10S myosin monomers containing the products of ATP hydrolysis trapped at the active site. The resulting fibers were rapidly disassembled after addition of millimolar MgATP and consequent transition of myosin to the soluble 10S state. However, reassembly of myosin filaments in the presence of MgATP and F-actin could be induced by phosphorylation of myosin P-light chains, causing regeneration of actomyosin fiber bundles. The results indicate that actomyosin fibers can be spontaneously formed by F-actin-mediated assembly of smooth muscle myosin. Moreover, induction of actomyosin fibers by myosin light chain phosphorylation in the presence of actin filament networks provides a plausible hypothesis for contractile fiber assembly in situ.     

Paramyosin content and thick filament structure in insect muscles

Summary The myosin filaments of the flight muscles of the locust Locusta migratoria, the cockchafer Melolontha melolontha and the femur muscles of L. migratoria have solid centers. Those of the flight muscles of the housefly Musca domestica and Drosophila melanogaster are tubular. Electron micrographs of myofibrils of the fleshfly Phormia terrae-novae contain both filament types within one sarcomere and suggest the existence of 4 cross-bridges per crown.Estimates of the ratios of myosin to paramyosin and of myosin to actin on sodium dodecyl sulphate-polyacrylamide gels yielded paramyosin contents of 9% of the thick filament mass for the solid and 2.6% for the tubular filaments (3.8% for P. terrae-novae). Based on the myosinactin ratios up to 6 myosin dimers per crown could be calculated.The molar ratio of actin to arthrin on SDS gels was found to be 3.37 for native and extracted myofibrils of flight muscles from P. terrae-novae. Arthrin is also present in isolated actin filaments suggesting that it is localized in or on the thin filaments. If we assume that it is constituent part of the helices of the thin filaments the number of myosin dimers per crown can be diminished to 4.5, considerably closer to the values obtained by evaluation of electron micrographs.Dedicated to Prof. Dr. Bernhard Rensch on his 85^th birthday     

Tropomyosin prevents depolymerization of actin filaments from the pointed end

Regulation of the pointed, or slow-growing, end of actin filaments is essential to the regulation of filament length. The purpose of this study is to investigate the role of skeletal muscle tropomyosin (TM) in regulating pointed end assembly and disassembly in vitro. The effects of TM upon assembly and disassembly of actin monomers from the pointed filament end were measured using pyrenyl-actin fluorescence assays in which the barbed ends were capped by villin. Tropomyosin did not affect pointed end elongation; however, filament disassembly from the pointed end stopped in the presence of TM under conditions where control filaments disassembled within minutes. The degree of protection against depolymerization was dependent upon free TM concentration and upon filament length. When filaments were diluted to a subcritical actin concentration in TM, up to 95% of the filamentous actin remained after 24 h and did not depolymerize further. Longer actin filaments (150 monomers average length) were more effectively protected from depolymerization than short filaments (50 monomers average length). Although filaments stopped depolymerizing in the presence of TM, they were not capped as shown by elongation assays. This study demonstrates that a protein, such as TM, which binds to the side of the actin filament can prevent dissociation of monomers from the end without capping the end to elongation. In skeletal muscle, tropomyosin could prevent thin filament disassembly from the pointed end and constitute a mechanism for regulating filament length.     

Ultrastructure of Developing Flight Muscle in Drosophila. I. Assembly of Myofibrils

In order to evaluate the effects of specific mutations on sarcomere assembly and function in vivo, we describe the course of normal development of Drosophila indirect flight muscle (IFM) in staged pupae using electron microscopy. We find that no contractile assemblies remain in larval muscle remnants invaded by imaginal myoblasts, establishing that myofibrils in IFM assemble de novo. Stress-fiber-like structures or other template structures are not prominent before or during sarcomere assembly. By 42 hr pupation (eclosion 112 hr), thick and thin filaments have appeared simultaneously in slender, interdigitated arrays between regularly spaced Z-bodies. Each tiny, uniformly striated myofibril forms within a "sleeve" of microtubules, and both microtubules and myofibrils are attached to the cell membrane at each end of the fiber from the initial stages of assembly. Later in pupation, the microtubule "sleeves" disassemble. Sarcomere number appears to remain constant. We saw no evidence that terminal sarcomeres are sites for addition of new sarcomeres or that Z-lines split transversely, producing new, very short sarcomeres. Rather, initial thick and thin filaments and sarcomeres are much shorter than adult length. Sarcomere length increases smoothly and coordinately from 1.7 to 3.2 μm, reflecting increase in filament lengths and indicating that myosin and actin molecules must be incorporated into filaments after sarcomere formation. Myofilaments are not seen scattered in the cytoplasm at any time, nor do we detect filaments that could be in the process of being "trolleyed" along myofibrils into positions of lateral register. Myofibril diameter increases uniformly from 4-thick filaments to 36-thick filaments across, by peripheral addition of myofilaments. At each successive stage, all sarcomeres in a fiber attained similar length and diameter. Initial thick filaments are solid but within several hours these and all subsequently assembled thick filaments appear hollow. Initial Z-bodies do not show any internal lattice and are more irregularly shaped than adult Z-discs.     

Assembly of thick filaments and myofibrils occurs in the absence of the myosin head

We investigated the importance of the myosin head in thick filament formation and myofibrillogenesis by generating transgenic Drosophila lines expressing either an embryonic or an adult isoform of the myosin rod in their indirect flight muscles. The headless myosin molecules retain the regulatory light-chain binding site, the alpha-helical rod and the C-terminal tailpiece. Both isoforms of headless myosin co-assemble with endogenous full-length myosin in wild-type muscle cells. However, rod polypeptides interfere with muscle function and cause a flightless phenotype. Electron microscopy demonstrates that this results from an antimorphic effect upon myofibril assembly. Thick filaments assemble when the myosin rod is expressed in mutant indirect flight muscles where no full-length myosin heavy chain is produced. These filaments show the characteristic hollow cross-section observed in wild type. The headless thick filaments can assemble with thin filaments into hexagonally packed arrays resembling normal myofibrils. However, thick filament length as well as sarcomere length and myofibril shape are abnormal. Therefore, thick filament assembly and many aspects of myofibrillogenesis are independent of the myosin head and these processes are regulated by the myosin rod and tailpiece. However, interaction of the myosin head with other myofibrillar components is necessary for defining filament length and myofibril dimensions.     

THE FILAMENT LATTICE OF COCKROACH THORACIC MUSCLE

The fine structure of the tergo-coxal muscle of the cockroach, Leucophaea maderae, has been studied with the electron microscope. This muscle differs from some other types of insect flight muscles inasmuch as the ratio of thin to thick filaments is 4 instead of the characteristic 3. The cockroach flight muscle also differs from the cockroach femoral muscle in thin to thick filament ratios and diameters and in lengths of thick filaments. A comparison of these latter three parameters in a number of vertebrate and invertebrate muscles suggests in general that the diameters and lengths of the thick filaments and thin to thick filament ratios are related.     

Genes critical for muscle development and function in Caenorhabditis elegans identified through lethal mutations

By taking advantage of a lethal phenotype characteristic of Caenorhabditis elegans embryos that fail to move, we have identified 13 genes required for muscle assembly and function and discovered a new lethal class of alleles for three previously known muscle-affecting genes. By staining mutant embryos for myosin and actin we have recognized five distinct classes of genes: mutations in four genes disrupt the assembly of thick and thin filaments into the myofilament lattice as well as the polarized location of these components to the sarcolemma. Mutations in another three genes also disrupt thick and thin filament assembly, but allow proper polarization of lattice components based on the myosin heavy chain isoform that we analyzed. Another two classes of genes are defined by mutations with principal effects on thick or thin filament assembly into the lattice, but not both. The final class includes three genes in which mutations cause relatively minor defects in lattice assembly. Failure of certain mutants to stain with antibodies to specific muscle cell antigens suggest that two genes associated with severe disruptions of myofilament lattice assembly may code for components of the basement membrane and the sarcolemma that are concentrated where dense bodies (Z- line analogs) and M-lines attach to the cell membrane. Similar evidence suggests that one of the genes associated with mild effects on lattice assembly may code for tropomyosin. Many of the newly identified genes are likely to play critical roles in muscle development and function.     

Ubiquitylation by Trim32 causes coupled loss of desmin, Z-bands, and thin filaments in muscle atrophy

During muscle atrophy, myofibrillar proteins are degraded in an ordered process in which MuRF1 catalyzes ubiquitylation of thick filament components (Cohen et al. 2009. J. Cell Biol. http://dx.doi.org/10.1083/jcb.200901052). Here, we show that another ubiquitin ligase, Trim32, ubiquitylates thin filament (actin, tropomyosin, troponins) and Z-band (α-actinin) components and promotes their degradation. Down-regulation of Trim32 during fasting reduced fiber atrophy and the rapid loss of thin filaments. Desmin filaments were proposed to maintain the integrity of thin filaments. Accordingly, we find that the rapid destruction of thin filament proteins upon fasting was accompanied by increased phosphorylation of desmin filaments, which promoted desmin ubiquitylation by Trim32 and degradation. Reducing Trim32 levels prevented the loss of both desmin and thin filament proteins. Furthermore, overexpression of an inhibitor of desmin polymerization induced disassembly of desmin filaments and destruction of thin filament components. Thus, during fasting, desmin phosphorylation increases and enhances Trim32-mediated degradation of the desmin cytoskeleton, which appears to facilitate the breakdown of Z-bands and thin filaments.     

The N-terminal region of twitchin binds thick and thin contractile filaments: redundant mechanisms of catch force maintenance

Catch force maintenance in invertebrate smooth muscles is probably mediated by a force-bearing tether other than myosin cross-bridges between thick and thin filaments. The phosphorylation state of the mini-titin twitchin controls catch. The C-terminal phosphorylation site (D2) of twitchin with its flanking Ig domains forms a phosphorylation-sensitive complex with actin and myosin, suggesting that twitchin is the tether (Funabara, D., Osawa, R., Ueda, M., Kanoh, S., Hartshorne, D. J., and Watabe, S. (2009) J. Biol. Chem. 284, 18015-18020). Here we show that a region near the N terminus of twitchin also interacts with thick and thin filaments from Mytilus anterior byssus retractor muscles. Both a recombinant protein, including the D1 and DX phosphorylation sites with flanking 7th and 8th Ig domains, and a protein containing just the linker region bind to thin filaments with about a 1:1 mol ratio to actin and K(d) values of 1 and 15 μM, respectively. Both proteins show a decrease in binding when phosphorylated. The unphosphorylated proteins increase force in partially activated permeabilized muscles, suggesting that they are sufficient to tether thick and thin filaments. There are two sites of thin filament interaction in this region because both a 52-residue peptide surrounding the DX site and a 47-residue peptide surrounding the D1 site show phosphorylation-dependent binding to thin filaments. The peptides relax catch force, confirming the region's central role in the mechanism of catch. The multiple sites of thin filament interaction in the N terminus of twitchin in addition to those in the C terminus provide an especially secure and redundant mechanical link between thick and thin filaments in catch.     

A Drosophila melanogaster model of spinal muscular atrophy reveals a function for SMN in striated muscle

Mutations in human survival motor neurons 1 (SMN1) cause spinal muscular atrophy (SMA) and are associated with defects in assembly of small nuclear ribonucleoproteins (snRNPs) in vitro. However, the etiological link between snRNPs and SMA is unclear. We have developed a Drosophila melanogaster system to model SMA in vivo. Larval-lethal Smn-null mutations show no detectable snRNP reduction, making it unlikely that these animals die from global snRNP deprivation. Hypomorphic mutations in Smn reduce dSMN protein levels in the adult thorax, causing flightlessness and acute muscular atrophy. Mutant flight muscle motoneurons display pronounced axon routing and arborization defects. Moreover, Smn mutant myofibers fail to form thin filaments and phenocopy null mutations in Act88F, which is the flight muscle-specific actin isoform. In wild-type muscles, dSMN colocalizes with sarcomeric actin and forms a complex with alpha-actinin, the thin filament crosslinker. The sarcomeric localization of Smn is conserved in mouse myofibrils. These observations suggest a muscle-specific function for SMN and underline the importance of this tissue in modulating SMA severity.     

A Nebulin Ruler Does Not Dictate Thin Filament Lengths

To generate force, striated muscle requires overlap between uniform-length actin and myosin filaments. The hypothesis that a nebulin ruler mechanism specifies thin filament lengths by targeting where tropomodulin (Tmod) caps the slow-growing, pointed end has not been rigorously tested. Using fluorescent microscopy and quantitative image analysis, we found that nebulin extended 1.01-1.03 μm from the Z-line, but Tmod localized 1.13-1.31 μm from the Z-line, in seven different rabbit skeletal muscles. Because nebulin does not extend to the thin filament pointed ends, it can neither target Tmod capping nor specify thin filament lengths. We found instead a strong correspondence between thin filament lengths and titin isoform sizes for each muscle. Our results suggest the existence of a mechanism whereby nebulin specifies the minimum thin filament length and sarcomere length regulates and coordinates pointed-end dynamics to maintain the relative overlap of the thin and thick filaments during myofibril assembly.     

Genetic dissection of novel myopathy models reveals a role of CapZα and Leiomodin 3 during myofibril elongation

Myofibrils within skeletal muscle are composed of sarcomeres that generate force by contraction when their myosin-rich thick filaments slide past actin-based thin filaments. Although mutations in components of the sarcomere are a major cause of human disease, the highly complex process of sarcomere assembly is not fully understood. Current models of thin filament assembly highlight a central role for filament capping proteins, which can be divided into three protein families, each ascribed with separate roles in thin filament assembly. CapZ proteins have been shown to bind the Z-disc protein α-actinin to form an anchoring complex for thin filaments and actin polymerisation. Subsequent thin filaments extension dynamics are thought to be facilitated by Leiomodins (Lmods) and thin filament assembly is concluded by Tropomodulins (Tmods) that specifically cap the pointed end of thin filaments. To study thin filament assembly in vivo, single and compound loss-of-function zebrafish mutants within distinct classes of capping proteins were analysed. The generated lmod3- and capza1b-deficient zebrafish exhibited aspects of the pathology caused by variations in their human orthologs. Although loss of the analysed main capping proteins of the skeletal muscle, capza1b, capza1a, lmod3 and tmod4, resulted in sarcomere defects, residual organised sarcomeres were formed within the assessed mutants, indicating that these proteins are not essential for the initial myofibril assembly. Furthermore, detected similarity and location of myofibril defects, apparent at the peripheral ends of myofibres of both Lmod3- and CapZα-deficient mutants, suggest a function in longitudinal myofibril growth for both proteins, which is molecularly distinct to the function of Tmod4.