Immobilized amines and basic amino acids as mimetic heparin-binding domains for cell surface proteoglycan-mediated adhesion.

Diamines covalently coupled to glass substrates promoted human foreskin fibroblast adhesion in the absence of serum. These diamine-derivatized substrates were produced by coupling ethylene diamine, N-methylaminoethylamine, and N,N-dimethylaminoethylamine (NNDMAEA), to sulfonyl chloride-activated glass. Electron spectroscopy for chemical analysis demonstrated that the diamines were coupled via their primary amine ends to produce a surface-bound secondary amine linked to a free amino moiety via a two-carbon spacer. NNDMAEA-modified substrates containing free tertiary amines supported the highest degree of cell spreading (73 +/- 7% actively spreading cells) and the most extensive cytoskeletal organization. Both the free tertiary and surface-bound secondary amines were shown to be required for cell spreading. Lysine- and arginine-grafted substrates supported cell spreading and cytoskeletal organization similar to that on NNDMAEA-modified substrates. Although some stress fibers were observed within spread cells on these substrates, focal contacts did not form. Heparinase treatment did not inhibit cell attachment or spreading to the diamine-derivatized substrates, however chondroitinase ABC inhibited cell attachment and spreading on all substrates; heparinase inhibited spreading on lysine- and arginine-derivatized substrates to a lesser extent. These results imply that cell attachment to these substrates was mediated primarily by cell surface chondroitin sulfate proteoglycans. This study demonstrates that covalently grafted NNDMAEA, lysine, and arginine can mimic the adhesion-promoting activity of the glycosaminoglycan-binding domains of cell adhesion proteins. This study also demonstrates that the interaction with these proteoglycans depends in a very sensitive manner on the particular structure of the immobilized amine.     

The Effect of Surface Modification of Aligned Poly-L-Lactic Acid Electrospun Fibers on Fiber Degradation and Neurite Extension

The surface of aligned, electrospun poly-L-lactic acid (PLLA) fibers was chemically modified to determine if surface chemistry and hydrophilicity could improve neurite extension from chick dorsal root ganglia. Specifically, diethylenetriamine (DTA, for amine functionalization), 2-(2-aminoethoxy)ethanol (AEO, for alcohol functionalization), or GRGDS (cell adhesion peptide) were covalently attached to the surface of electrospun fibers. Water contact angle measurements revealed that surface modification of electrospun fibers significantly improved fiber hydrophilicity compared to unmodified fibers (p < 0.05). Scanning electron microscopy (SEM) of fibers revealed that surface modification changed fiber topography modestly, with DTA modified fibers displaying the roughest surface structure. Degradation of chemically modified fibers revealed no change in fiber diameter in any group over a period of seven days. Unexpectedly, neurites from chick DRG were longest on fibers without surface modification (1651 ± 488 μm) and fibers containing GRGDS (1560 ± 107 μm). Fibers modified with oxygen plasma (1240 ± 143 μm) or DTA (1118 ± 82 μm) produced shorter neurites than the GRGDS or unmodified fibers, but were not statistically shorter than unmodified and GRGDS modified fibers. Fibers modified with AEO (844 ± 151 μm) were significantly shorter than unmodified and GRGDS modified fibers (p<0.05). Based on these results, we conclude that fiber hydrophilic enhancement alone on electrospun PLLA fibers does not enhance neurite outgrowth. Further work must be conducted to better understand why neurite extension was not improved on more hydrophilic fibers, but the results presented here do not recommend hydrophilic surface modification for the purpose of improving neurite extension unless a bioactive ligand is used.     

In situ immobilization of proteins and RGD peptide on polyurethane surfaces via poly(ethylene oxide) coupling polymers for human endothelial cell growth

A "CBABC"-type pentablock coupling polymer, mesylMPEO, was designed and synthesized to promote human endothelial cell growth on the surfaces of polyurethane biomaterials. The polymer was composed of a central 4,4'-methylenediphenyl diisocyanate (MDI) coupling unit and poly(ethylene oxide) (PEO) spacer arms with methanesulfonyl (mesyl) end groups pendent on both ends. As the presurface modifying additive (pre-SMA), the mesylMPEO was noncovalently introduced onto the poly(ether urethane) (PEU) surfaces by dip coating, upon which the protein/peptide factors (gelatin, albumin, and arginine-glycine-aspartic acid tripeptide [RGD]) were covalently immobilized in situ by cleavage of the original mesyl end groups. The pre-SMA synthesis and PEU surface modification were characterized using nuclear magnetic resonance spectroscopy ((1)H NMR), attenuated total reflection infrared spectroscopy (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS). Human umbilical vein endothelial cells (HUVEC) were harvested manually by collagenase digestion and seeded on the modified PEU surfaces. Cell adhesion ratios (CAR) and cell proliferation ratios (CPR) were measured using flow cytometry, and the individual cell viability (ICV) was determined by MTT assay. The cell morphologies were investigated by optical inverted microscopy (OIM) and scanning electrical microscopy (SEM). The gelatin- and RGD-modified surfaces were HUVEC-compatible and promoted HUVEC growth. The albumin-modified surfaces were compatible but inhibited cell adhesion. The results also indicated that, for HUVEC in vitro cultivation, the cell adhesion stage was of particular importance and had a significant impact on the cell responses to the modified surfaces.     

Surface plasmon resonance measurement of pH-induced responses of immobilized biomolecules: conformational change or electrostatic interaction effects?

Recently, the observation of pH-induced conformational changes of biomolecules supported on carboxymethyldextran (CMD)-coated surfaces measured using surface plasmon resonance (SPR) has been reported. However, it is apparent that the evidence reported in the literature is ambiguous. The research presented in this paper describes investigations to study the changing SPR signal of immobilized biomolecules as a function of varying pH, to provide a detailed understanding of the origin of the pH-induced changes in the SPR profile. SPR measurements were performed with cytochrome c, concanavalin A, and poly-L-lysine, biomolecules that exhibit diverse conformational responses to changing pH, covalently immobilized onto CMD-coated supports. These SPR measurements were supported by circular dichroism (CD) solution studies. The SPR profiles recorded were not consistent with the conformational transitions of the biomolecules as observed using CD. An alternative explanation for the observed shifts in SPR is proposed, which explains the SPR profiles in terms of electrostatic interaction effects between the immobilized biomolecules and the carboxymethyldextran matrix.     

Adhesive properties of osteopontin: regulation by a naturally occurring thrombin-cleavage in close proximity to the GRGDS cell-binding domain.

Osteopontin (OPN) is a secreted adhesive glycoprotein with a functional glycine-arginine-glycine-aspartate-serine (GRGDS) cell-binding domain. An interesting feature of OPN structure is the presence of a thrombin-cleavage site in close proximity to the GRGDS region. Cleavage of OPN by thrombin is likely to be of physiological importance, because cleavage of blood plasma OPN occurs naturally after activation of the blood coagulation pathway. To investigate functional consequences of OPN cleavage by thrombin, cell attachment and spreading assays were performed with uncleaved and cleaved forms of OPN. For all cell lines examined, thrombin-cleaved OPN promoted markedly greater cell attachment and spreading than uncleaved OPN. Cell attachment and spreading on thrombin-cleaved OPN was inhibited both by the soluble GRGDS peptides and an OPN-specific antibody raised to the GRGDS domain of OPN, thus implicating the GRGDS region in mediating the increased cell attachment and spreading observed on thrombin-cleaved OPN. Because the GRGDS sequence in OPN is only six residues from the thrombin-cleavage site, the data suggest that possibility that thrombin cleavage allows greater accessibility of the GRGDS domain to cell surface receptors. To investigate receptors that recognize uncleaved and thrombin-cleaved OPN, affinity chromatography was performed on placental extracts; the cell surface integrin alpha v beta 3 bound to columns constructed either with native or thrombin-cleaved OPN and was selectively eluted from each with soluble GRGDS peptide and EDTA. Moreover, adhesion assays performed in the presence of alpha v beta 3 blocking monoclonal antibody LM609 identified alpha v beta 3 as a major functional receptor for thrombin-cleaved OPN. Several lines of evidence suggest that cleavage of OPN by thrombin occurs in vivo, such as in tumors and at sites of tissue injury, and adhesion assay data presented here indicate that such cleavage is important in the regulation of OPN function.     

Multifunctional poly(ethylene glycol) semi-interpenetrating polymer networks as highly selective adhesive substrates for bioadhesive peptide grafting

Novel artificial extracellular matrices were synthesized in the form of semi-interpenetrating polymer networks containing copolymers of poly(ethylene glycol) and acrylic acid (PEG-co-AA) grafted with synthetic bioadhesive peptides onto exposed carboxylic acid moieties. These substrates were very resistant to cell adhesion, but when they were grafted with adhesive peptides they were highly biospecific in their ability to support cell adhesion. Extensive preadsorption of adhesive proteins or peptides did not render these materials cell adhesive; yet covalent grafting of adhesive peptides did render these materials highly cell adhesive even in the absence of serum proteins. Polymer networks containing immobilized PEG-co-AA were grafted with peptides at densities of 475 +/- 40 pmol/cm(2). Polymer networks containing immobilized PEG-co-AA N-terminally grafted with GRGDS supported cell adhesion efficiencies of 42 +/- 4% 4 h after seeding and became confluent after 12 h. These cells displayed cell spreading and cytoskeletal grafted with inactive control peptides (GRDGS, GRGES, or no peptide) supported cell adhesion efficiencies of 0 +/- 0%, even when challenged with high seeding densities (to 100,000 cell/cm(2)) over 14 days. These polymer networks are suitable substrates to investigate in vitro cell-surface interactions in the presence of serum proteins without nonspecific protein adsorption adhesion signals other than those immobilized for study.     

Synthesis of Arg-Gly-Asp (RGD) sequence conjugated thermo-reversible gel via the PEG spacer arm as an extracellular matrix for a pheochromocytoma cell (PC12) culture

Adhesion molecules composed of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides and cell recognition ligands were inculcated into thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 3400) used as a biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was studied in vitro for its ability to promote cell spreading and to increase the viability of cells by introducing PEG spacers. Hydrogel lacking the adhesion molecules proved to be a poor ECM for adhesion, permitting only a 20% spread of the seeded cells after 10 days. When PEG spacer arms, immobilized by a peptide linkage, had been integrated into the hydrogel, conjugation of RGD promoted cell spread by 600% in a 10-day trial. In addition, in a serum-free medium, only GRGDS peptides conjugated with the spacer arm were able to promote cell spread. In terms of the cell viability, GRGDS peptides conjugated with the PEG-carrying copolymer gel specifically mediated cell spread. This result supports the theory that specific recognition is the result of interaction between the integrin families on the fibroblast, and the RGD sequence on the p(NiPAAm-co-PEG) copolymer gel.     

Fibroblast cell behavior on bound and adsorbed fibronectin onto hyaluronan and sulfated hyaluronan substrates

The effect of fibronectin protein (Fn) coating onto polysaccharide layers of hyaluronic acid (Hyal) and its sulfated derivative (HyalS) on fibroblast cell adhesion was analyzed. The Hyal or HyalS were coated and grafted on the glass substrate by a photolithographic method. The Fn coating was achieved by two different routes: the immobilization of Fn by covalent bond to the polysaccharide layers and the simple adsorption of Fn onto Hyal and HyalS surfaces. AFM, SEM, and ATR-FTIR techniques were used for the chemical and topographical characterization of the surfaces. According to AFM and SEM data, the surface topography was dependent on the method used to cover the polysaccharide layers with the protein. ATR-FTIR analysis supplied information about the rearrangement of Fn after the interaction (adsorption or binding) with the Hyal and the HyalS. The conformational changes of the Fn were minimal when it was simply adsorbed on HyalS surfaces and larger once bound, whereas on the Hyal layer the protein underwent a bigger conformational change once adsorbed and covalently grafted. Then, the biological characterization was carried out by analyzing the human diploid skin fibroblasts adhesion on these surfaces. The morphology of fibroblasts was evaluated by SEM, whereas the dynamics of fibroblasts movement were recorded by a time-lapse system. Cell variations in area, perimeter, and length were analyzed at 2, 4, and 6 h. It was found that the addition of Fn (covalently bound or merely adsorbed) was fundamental in the promotion of fibroblasts adhesion and spreading. The greatest adhesion occurred onto HyalS layers covered by the adsorbed Fn.     

Synthesis of Arg–Gly–Asp (RGD) Sequence Conjugated Thermo-Reversible Gel via the PEG Spacer Arm as an Extracellular Matrix for a Pheochromocytoma Cell (PC12) Culture

Adhesion molecules composed of Gly–Arg–Gly–Asp–Ser (GRGDS) peptides and cell recognition ligands were inculcated into thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 3400) used as a biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was studied in vitro for its ability to promote cell spreading and to increase the viability of cells by introducing PEG spacers. Hydrogel lacking the adhesion molecules proved to be a poor ECM for adhesion, permitting only a 20% spread of the seeded cells after 10 days. When PEG spacer arms, immobilized by a peptide linkage, had been integrated into the hydrogel, conjugation of RGD promoted cell spread by 600% in a 10-day trial. In addition, in a serum-free medium, only GRGDS peptides conjugated with the spacer arm were able to promote cell spread. In terms of the cell viability, GRGDS peptides conjugated with the PEG-carrying copolymer gel specifically mediated cell spread. This result supports the theory that specific recognition is the result of interaction between the integrin families on the fibroblast, and the RGD sequence on the p(NiPAAm-co-PEG) copolymer gel.     

Bioactive poly(ethylene terephthalate) fibers and fabrics: grafting, chemical characterization, and biological assessment

The grafting of poly(sodium styrene sulfonate) (pNaSS) onto ozone-treated poly(ethylene terephthalate) (PET) fabric surfaces was characterized by X-ray photoelectron spectroscopy and toluidine blue colorimetry. Significant amounts of pNaSS were grafted over the range of experimental conditions examined in this study (30-120 min of ozonation, reaction at 65 or 70 degrees C, and reaction times up to 240 min). Within these ranges the amount of grafted pNaSS increased with both ozonation time and reaction temperature. The amount of grafted pNaSS increased over the first 60 min of reaction, then remained relatively constant from 60 to 240 min. For the biological experiments pNaSS-grafted samples were prepared with 30 min of ozonation and 60 min of reaction at a grafting temperature of 70 degrees C. The ozonation time was limited to 30 min to minimize any possible degradation of the PET fabrics by the ozonation treatment. The pNaSS-grafted PET surface adsorbed a factor of 4 more compared to the nongrafted surfaces. The strength of fibroblast adhesion was an order of magnitude higher on pNaSS-grafted PET fabrics compared to that on nongrafted PET fabrics. This difference in the cell attachment was correlated to the cell spreading, which was better and more homogeneous on the grafted fibers compared to the nongrafted fibers. Fibroblasts adhered more strongly on surfaces precoated with normal human plasma compared to surfaces precoated with 10% fetal calf serum in Dulbecco's modified Eagle's medium.     

Heparin II domain of fibronectin uses alpha4beta1 integrin to control focal adhesion and stress fiber formation, independent of syndecan-4

Co-signaling events between integrins and cell surface proteoglycans play a critical role in the organization of the cytoskeleton and adhesion forces of cells. These processes, which appear to be responsible for maintaining intraocular pressure in the human eye, involve a novel cooperative co-signaling pathway between alpha5beta1 and alpha4beta1 integrins and are independent of heparan sulfate proteoglycans. Human trabecular meshwork cells isolated from the eye were plated on type III 7-10 repeats of fibronectin (alpha5beta1 ligand) in the absence or presence of the heparin (Hep) II domain of fibronectin. In the absence of the Hep II domain, cells had a bipolar morphology with few focal adhesions and stress fibers. The addition of the Hep II domain increased cell spreading and the numbers of focal adhesions and stress fibers. Cell spreading and stress fiber formation were not mediated by heparan sulfate proteoglycans because treatment with chlorate, heparinase, or soluble heparin did not prevent Hep II domain-mediated cell spreading. Cell spreading and stress fiber formation were mediated by alpha4beta1 integrin because soluble anti-alpha4 integrin antibodies inhibited Hep II domain-mediated cell spreading and soluble vascular cell adhesion molecule-1 (alpha4beta1 ligand)-induced cell spreading. This is the first demonstration of the Hep II domain mediating cell spreading and stress fiber formation through alpha4beta1 integrin. This novel pathway demonstrates a cooperative, rather than antagonistic, role between alpha5beta1 and alpha4beta1 integrins and suggests that interactions between the Hep II domain and alpha4beta1 integrin could modulate the strength of cytoskeleton-mediated processes in the trabecular meshwork of the human eye.     

Bioactivity of immobilized hyaluronic acid derivatives regarding protein adsorption and cell adhesion

Hyaluronic acid (HA) was chemically modified either by oxidation to obtain aldehyde-HA (aHA) or 3,3'-dithiobis(propanoic hydrazide) to obtain thiol-HA (tHA) that was covalently immobilized on model substrata such as amino-terminated surfaces or gold. Knowledge about the effect of modification with HA on physicochemical surface properties of these substrata and estimates of the quantities of immobilized HA were obtained by different physical methods such as contact angle measurements, ellipsometry, and atomic force microscopy. The bioactivity of aHA and tHA toward their natural binding partner aggrecan was studied by comparing surface plasmon resonance to native HA; this shows that binding of aggrecan was achieved in a similar way. Dermal human fibroblasts were used as a model cell to study how chemical modification and immobilization of HA impact adhesion and spreading of cells, which also affects cell growth and differentiation. A lower number and spreading of cells were observed on HA-modified surfaces compared to amino- and vinyl-terminated glass and silicon surfaces. Immunofluorescence microscopy also revealed that adhesion of fibroblast plated on HA-modified surfaces was mediated primarily by HA receptor CD44, indicating that bioactivity of HA was not significantly reduced by chemical modification.     

Bioactive microarrays immobilized on low-fouling surfaces to study specific endothelial cell adhesion

With the aim to study how to modulate the specific endothelial cell patterning and responses on biomaterials surfaces, bioactive microarrays were developed and validated for specific cell patterning. These microarrays were made of low-fouling surfaces, that prevent nonspecific cell adhesion, bearing bioactive molecules at given known locations by presenting specific ligands to cell receptors. Arrays of bioactive molecules (RGD, REDV, and SVVYGLR sequences and vascular endothelial growth factor (VEGF)) were immobilized on a carboxy-methyl-dextran low-fouling surface and were exposed to human endothelial cells and fibroblasts to screen for the effect of bioactive spot molecular composition on cell adhesion. Endothelial cells only were sensitive to RGD peptide co-immobilized with REDV or SVVYGLR sequences: they induced a reduction in cell spreading and a loss of actin stress fibers. RGD co-immobilized with VEGF also resulted in the reorganization of actin filaments and focal points in endothelial cells. Combination of RGD with these endothelial cell-selective biomolecules did not elicit a strong adhesion phenotype but rather one characteristic of migrating cells.     

Covalent surface immobilization of Arg-Gly-Asp- and Tyr-Ile-Gly-Ser-Arg-containing peptides to obtain well-defined cell-adhesive substrates

The synthetic peptides Gly-Arg-Gly-Asp-Tyr and Gly-Tyr-Ile-Gly-Ser-Arg-Tyr, which contain Arg-Gly-Asp (RGD) and Tyr-Ile-Gly-Ser-Arg (YIGSR), the ligands for two important classes of cell adhesion receptors, were covalently coupled to a nonadhesive modified glass surface by the N-terminal Gly. The N-terminal Gly served as a spacer, and the C-terminal Y served as a site for radioiodination. These modified substrates supported the adhesion and spreading of cultured human foreskin fibroblasts (HFFs) independently of adsorbed proteins and, it was demonstrated that a covalently immobilized YIGSR-containing peptide has biological activity. The surface concentration of grafted peptide on the glass was measured by 125I radio-labeling and was 12.1 pmol/cm2. HFFs spread on both immobilized peptide substrates, but at much slower rates on grafted YIGSR glass surfaces than on the RGD-containing substrates. Cells formed focal contacts on the RGD-derivatized substrates in the presence or absence of serum. Focal contacts formed on the YIGSR-grafted surfaces only when serum was present in the medium and had morphologies different from those observed on the RGD-containing substrates. Serum influenced the organization of microfilaments and the extent of spreading of adherent cells, although adsorption of adhesion proteins was minimal on all substrates. This derivatization method produced chemically stable substrates which may be useful in studying receptor-mediated cell adhesion, as the quantity of peptide available at the surface may be precisely measured and controlled.     

Intrinsic Response Towards Physiologic Stiffness is Cell-Type Dependent

In the continuous search for better tissue engineering scaffolds it has become increasingly clear that the substrate properties dramatically affect cell responses. Here we compared cells from a physiologically stiff tissue, melanoma, to cells isolated from a physiologically soft tissue, brain. We measured the cell line responses to laminin immobilized onto glass or polyacrylamide hydrogels tuned to have a Young’s modulus ranging from 1 to 390?kPa. Single cells were analyzed for spreading area, shape, total actin content, actin-based morphological features and modification of immobilized laminin. Both cell types exhibited stiffness- and laminin concentration-dependent responses on polyacrylamide and glass. Melanoma cells exhibited very little spreading and were rounded on soft (1, 5, and 15?kPa) hydrogels while cells on stiff (40, 100, and 390?kPa) hydrogels were spread and had a polarized cell shape with large lamellipodia. On rigid glass surfaces, spreading and actin-based morphological features were not observed until laminin concentration was much higher. Similarly, increased microglia cell spreading and presence of actin-based structures were observed on stiff hydrogels. However, responses on rigid glass surfaces were much different. Microglia cells had large spreading areas and elongated shapes on glass compared to hydrogels even when immobilized laminin density was consistent on all gels. While cell spreading and shape varied with Young’s modulus of the hydrogel, the concentration of f-actin was constant. A decrease in laminin immunofluorescence was associated with melanoma and microglia cell spreading on glass with high coating concentration of laminin, indicating modification of immobilized laminin triggered by supraphysiologic stiffness and high ligand density. These results suggest that some cell lines are more sensitive to mechanical properties matching their native tissue environment while other cell lines may require stiffness and extracellular ligand density well above physiologic tissue before saturation in cell spreading, elongation and cytoskeletal re-organization are reached.     

A Mr 72K cell surface concanavalin A binding glycoprotein is specifically involved in the spreading of chick embryo fibroblasts onto laminin substrate

In the present study we have identified a 72-kDa cell surface concanavalin A binding glycoprotein (cbg 72) involved in the chick embryo fibroblast (CEF) adhesion onto laminin (LM) substrate. The cbg 72 was shown to interact specifically with immobilized laminin and to be resistant to Triton X-100 extraction when CEF were plated on laminin substrate but not on fibronectin (FN) substrate. This behavior suggested that cbg 72 could interact with cytoskeletal elements during cell spreading onto LM. This assumption is also in good agreement with the partitioning of cbg 72 in Triton X-114. Isolated cbg 72 specifically inhibited CEF spreading onto LM after their initial attachment, whereas cbg 72 did not impair the spreading of CEF onto FN. These data provide a molecular explanation to the inhibition of CEF spreading onto LM observed in the presence of the lectin concanavalin A (P. Codogno, M.-A. Doyennette-Moyne, J. Botti, and M. Aubery, 1988, J. Cell Physiol. 136, 463-470). Moreover, these results provide evidence for the role of a novel LM binding glycoprotein during the adhesion of mesenchymal derived cells. The relationship between cbg 72 and other known cell surface LM binding sites or receptors is discussed.     

Galectin-8 functions as a matricellular modulator of cell adhesion

The interaction of cells with the extracellular matrix regulates cell adhesion and motility. Here we demonstrate that different cell types adhere and spread when cultured in serum-free medium on immobilized galectin-8, a mammalian beta-galactoside-binding protein. At maximal doses, galectin-8 is equipotent to fibronectin in promoting cell adhesion and spreading. Cell adhesion to immobilized galectin-8 is mediated by sugar-protein interactions with integrins, and galectin-8 triggers integrin-mediated signaling cascades including Tyr phosphorylation of focal adhesion kinase and paxillin. Cell adhesion is potentiated in the presence of Mn(2+), whereas it is interrupted in the presence of soluble galectin-8, integrin beta(1) inhibitory antibodies, EDTA, or thiodigalactoside but not by RGD peptides. Furthermore, cells readily adhere onto immobilized monoclonal galectin-8 antibodies, which are equipotent to integrin antibodies in promoting cell adhesion. Cell adhesion to immobilized galectin-8 is partially inhibited by serum proteins, suggesting that complex formation between immobilized galectin-8 and serum components generates a matrix that is less supportive of cell adhesion. Accordingly, cell motility on immobilized galectin-8 readily takes place in the presence of serum. Truncation of the C-terminal half of galectin-8, including one of its two carbohydrate recognition domains, largely abolishes its ability to modulate cell adhesion, indicating that both carbohydrate recognition domains are required to maintain a functional form of galectin-8. Collectively, our findings implicate galectin-8 as a physiological modulator of cell adhesion. When immobilized, it functions as a matrix protein equipotent to fibronectin in promoting cell adhesion by ligation and clustering of cell surface integrin receptors. In contrast, when present in excess as a soluble ligand, galectin-8 (like fibronectin) forms a complex with integrins that negatively regulates cell adhesion. Because of its dual effects on the adhesive properties of the cells and its association with fibronectin, galectin-8 might be considered a novel type of matricellular protein.     

Use of an immobilized monoclonal antibody to examine integrin α5β1 signaling independent of cell spreading

Cell attachment to the extracellular matrix (ECM) engages integrin signaling into the cell, but part of the signaling response also stem from cell spreading (3). To analyze specific integrin signaling-mediated responses independent of cell spreading, we developed a method engaging integrin signaling by use of an immobilized anti-integrin monoclonal antibody (mab) directed against the fibronectin (FN) receptor integrin α5β1. ECV 304 cells were plated onto FN or immobilized mab JBS5 (anti-integrin α5β1) or onto poly-L-lysin (P-L-L), which mediates integrin-independent attachment. Cells attached and spread on FN, while cells on JBS5 or P-L-L attached but did not spread. Importantly, plating onto FN or mab JBS5 gave rise to identical integrin-induced responses, including a down-regulation of the cyclin-dependent kinase (Cdk2) inhibitors p21^CIP1 and p27^KIP1, while attachment to P-L-L did not. We conclude that engagement of the FN-receptor integrin α5β1 induces integrin signaling regulating the Cdk2-inhibitors independent of cell spreading and present a method for how integrin signaling can be analyzed separate from the effects of cell spreading. Published: November 11, 2002     

Extracellular polymeric substances responsible for bacterial adhesion onto solid surface

The influence of extracellular polymeric substances (EPS) on bacterial cell adhesion onto solid surfaces was investigated using 27 heterotrophic bacterial strains isolated from a wastewater treatment reactor. Cell adhesion onto glass beads was carried out by the packed-bed method and the results were discussed in terms of the amount of each EPS component produced and cell surface characteristics such as zeta potential and hydrophobicity. Protein and polysaccharides accounted for 75-89% of the EPS composition, indicating that they are the major EPS components. Among the polysaccharides, the amounts of hexose, hexosamine and ketose were relatively high in EPS-rich strains. For EPS-poor strains, the efficiency of cell adhesion onto glass beads increased as the absolute values of zeta potential decreased, suggesting that electrostatic interaction suppresses cell adhesion efficiency. On the other hand, the amounts of hexose and pentose exhibited good correlations with cell adhesiveness for EPS-rich strains, indicating that polymeric interaction due to the EPS covering on the cell surface promoted cell adhesion. It was concluded that, if the EPS amount is relatively small, cell adhesion onto solid surfaces is inhibited by electrostatic interaction, and if it is relatively large, cell adhesion is enhanced by polymeric interaction.     

Polyvinylamine-graft-TEMPO adsorbs onto, oxidizes, and covalently bonds to wet cellulose

Described is a new, greener approach to increasing adhesion between wet cellulose surfaces. Polyvinylamine (PVAm) with grafted TEMPO spontaneously adsorbs onto cellulose and oxidizes the C6 hydroxyl to aldehyde groups that react to form covalent bonds with primary amines on PVAm. Grafted TEMPO offers two important advantages over solutions of low-molecular-weight water-soluble TEMPO derivatives. First, the oxidation of porous cellulose wood fibers is restricted to the exterior surfaces accessible to high-molecular-weight PVAm. Thus, fibers are not weakened by excessive oxidation of the interior fiber wall surfaces. The second advantage of tethered TEMPO is that the total dose of TEMPO required to oxidize dilute fiber suspensions is much less than that required by water-soluble TEMPO derivatives. PVAm-TEMPO is stable under oxidizing conditions. The oxidation activity of the immobilized TEMPO was demonstrated by the conversion of methylglyoxal to pyruvic acid.