High biomass production and CO<Subscript>2</Subscript> fixation from biogas by <Emphasis Type="Italic">Chlorella</Emphasis> and <Emphasis Type="Italic">Scenedesmus</Emphasis> microalgae using tequila vinasses as culture medium

Tequila vinasses (TVs) generated during Tequila production are brown liquid residues rich in nutrients. The nutrient content of agro-industrial effluents represents an excellent resource to support low-cost biomass production of microalgae; nonetheless, it is crucial to select the suitable microalgal strain to attain the highest biomass production in each residue used. In this study, biomass production, CO₂ fixation from biogas, and cell compound accumulation by Chlorella vulgaris U162, Chlorella sp., Scenedesmus obliquus U169, and Scenedesmus sp. using biodigested and filtered TVs as culture medium were evaluated and compared with the conventional microalgal culture media, C30, BG-11, Bold 3N, and Bristol. The four microalgae evaluated attained the highest biomass production and CO₂ fixation rate cultured in both residues, accumulating mainly carbohydrates and proteins although the most appropriate microalga to be cultured in TVs was Chlorella sp., recording 2.30 g L^?1. Moreover, the nutrient ratio of filtered TVs was ideal to support biomass production while biodigested TVs need to be supplemented with nitrogen. Overall, these results demonstrated that tequila vinasses are an excellent resource to support high and quick biomass production of microalgae, which can be used to obtain biofuels as ethanol, biogas, and supplement food depicting an extra benefit during the appropriate disposal of this residue.     

Current research trends on microplastic pollution from wastewater systems: a critical review

Microplastics have been widely considered as contaminants for the environment and biota. Till now, most previous studies have focused on the identification and characterization of microplastics in freshwater, sea water, and the terrestrial environment. Although microplastics have been extensively detected in the wastewater, research in this area is still lacking and not thoroughly understood. To fill this knowledge gap, the current review article covers the analytical methods of microplastics originating from wastewater streams and describes their sources and occurrences in wastewater treatment plants (WWTPs). Studies indicated that microplastic pollution caused by domestic washing of synthetic fibers could be detected in the effluent; however, most microplastics from personal care and cosmetic products (PCCPs) can be efficiently removed during wastewater treatment. Moreover, various techniques for sampling and analyzing microplastics from wastewater systems are reviewed; while, the implementation of standardized protocols for microplastics is required. Finally, the fate of microplastics during wastewater treatments and the environmental contamination of effluent to environment are presented. Previous studies reported that the advanced wastewater treatment (e.g., membrane bioreactor) is needed for improving the removal efficiency of small-sized microplastics (<?100 µm). Although the role of microplastics as transport vectors for persistent organic pollutants (POPs) is still under debate, they have demonstrated abilities to absorb harmful agents like pharmaceuticals.

     

A comprehensive review on application of bioreactor for industrial wastewater treatment

In the recent past, wastewater treatment processes performed a pivotal role in accordance with maintaining the sustainable environment and health of mankind at a proper hygiene level. It has been proved indispensable by government regulations throughout the world on account of the importance of preserving freshwater bodies. Human activities, predominantly from industrial sectors, generate an immeasurable amount of industrial wastewater loaded with toxic chemicals, which not only cause dreadful environmental problems, but also leave harmful impacts on public health. Hence, industrial wastewater effluent must be treated before being released into the environment to restrain the problems related to industrial wastewater discharged to the environment. Nowadays, biological wastewater treatment methods have been considered an excellent approach for industrial wastewater treatment process because of their cost-effectiveness in the treatment, high efficiency and their potential to counteract the drawbacks of conventional wastewater treatment methods. Recently, the treatment of industrial effluent through bioreactor has been proved as one of the best methods from the presently available methods. Reactors are the principal part of any biotechnology-based method for microbial or enzymatic biodegradation, biotransformation and bioremediation. This review aims to explore and compile the assessment of the most appropriate reactors such as packed bed reactor, membrane bioreactor, rotating biological contactor, up-flow anaerobic sludge blanket reactor, photobioreactor, biological fluidized bed reactor and continuous stirred tank bioreactor that are extensively used for distinct industrial wastewater treatment.     

Economic evaluation of the environmental impact of a dairy cattle intensive production cluster under arid lands conditions

At a global level, dairy cow production systems (DCPS) are important sources of nourishment and profits, but they generate environmental impacts such as overexploitation of different resources including water, lands and fossil energy. Quantification of water and carbon footprint to define mitigation strategies and a more rational use of natural resources, is a reiterated claim. The aim of this study was to perform an economic evaluation of the environmental impact of the DCPS from the Comarca Lagunera, Mexico (24°N, 102°W, 220 mm, hot-semiarid climate) We contrasted the economic value (EV) generated by the DCPS with respect to the economic costs (EC) due to the greenhouse gas emissions (GHGE) and the water footprint (WFP) of this DCPS. While quantifications of GHGE considered those proposed by the Intergovernmental Panel on Climate Change, the WFP involved the use of blue, gray and green water by the DCPS and related activities. Quantification of the EC of WFP considered an international average price of water. In the year 2017, the Comarca Lagunera registered a dairy cow inventory of 493 144 heads, with 227 142 lactating cows, which produced 2386 million liters of milk per year with an annual average EV of €525.3 million. The EC (€, millions) generated by the GHGE and WFP were €311.8 and €11 980.7, respectively, with a total EC of € 12 292.5 million. When the EV of milk production and the total environmental EC are compared, the contrast demonstrates not only the noteworthy environmental impact but also the significant and senseless biological and EC. In addition, having a large dairy cow concentration creates pollution concerns and the DCPS transfers both nutrients and water resources from an ecologically vulnerable arid region. Therefore, some mitigation strategies such as, better cow genotype, feed and manure management combined with the production of forages and grains in a different geographical region are suggested to promote an optimum use of water in order to uphold the social, economic and biologic sustainability of the Comarca Lagunera, Mexico.     

Monitoring biological wastewater treatment processes: recent advances in spectroscopy applications

Biological processes based on aerobic and anaerobic technologies have been continuously developed to wastewater treatment and are currently routinely employed to reduce the contaminants discharge levels in the environment. However, most methodologies commonly applied for monitoring key parameters are labor intensive, time-consuming and just provide a snapshot of the process. Thus, spectroscopy applications in biological processes are, nowadays, considered a rapid and effective alternative technology for real-time monitoring though still lacking implementation in full-scale plants. In this review, the application of spectroscopic techniques to aerobic and anaerobic systems is addressed focusing on UV–Vis, infrared, and fluorescence spectroscopy. Furthermore, chemometric techniques, valuable tools to extract the relevant data, are also referred. To that effect, a detailed analysis is performed for aerobic and anaerobic systems to summarize the findings that have been obtained since 2000. Future prospects for the application of spectroscopic techniques in biological wastewater treatment processes are further discussed.     

Developments in odour control and waste gas treatment biotechnology: a review

Waste and wastewater treatment processes produce odours, which can cause a nuisance to adjacent populations and contribute significantly to atmospheric pollution. Sulphurous compounds are responsible for acid rain and mist; many organic compounds of industrial origin contribute to airborne public health concerns, as well as environmental problems. Waste gases from industry have traditionally been treated using physicochemical processes, such as scrubbing, adsorption, condensation, and oxidation, however, biological treatment of waste gases has gained support as an effective and economical option in the past few decades. One emergent technique for biological waste gas treatment is the use of existing activated sludge plants as bioscrubbers, thus treating the foul air generated by other process units of the wastewater treatment system on site, with no requirement for additional units or for interruption of wastewater treatment. Limited data are available regarding the performance of activated sludge diffusion of odorous air in spite of numerous positive reports from full-scale applications in North America. This review argues that the information available is insufficient for precise process design and optimization, and simultaneous activated sludge treatment of wastewater and airborne odours could be adopted worldwide.     

Compatible solute addition to biological systems treating waste/wastewater to counteract osmotic and other environmental stresses: a review

This study reviews the addition of compatible solutes to biological systems as a strategy to counteract osmolarity and other environmental stresses. At high osmolarity many microorganisms accumulate organic solutes called “compatible solutes” in order to balance osmotic pressure between the cytoplasm and the environment. These organic compounds are called compatible solutes because they can function inside the cell without the need for special adaptation of the intracellular enzymes, and also serve as protein stabilizers in the presence of high ionic strength. Moreover, the compatible solutes strategy is regularly being employed by the cell, not only under osmotic stress at high salinity, but also under other extreme environmental conditions such as low temperature, freezing, heat, starvation, dryness, recalcitrant compounds and solvent stresses. The accumulation of these solutes from the environment has energetically a lower cost than de novo synthesis. Based on this cell mechanism several studies in the field of environmental biotechnology (most of them on biological wastewater treatment) employed this strategy by exogenously adding compatible solutes to the wastewater or medium in order to alleviate environmental stress. This current paper critically reviews and evaluates these studies, and examines the future potential of this approach. In addition to this, a strategy for the successful implementation of compatible solutes in biological systems is proposed.     

Quantitative real-time PCR approaches for microbial community studies in wastewater treatment systems: Applications and considerations

Quantitative real-time PCR (qPCR) has been widely used in recent environmental microbial ecology studies as a tool for detecting and quantifying microorganisms of interest, which aids in better understandings of the complexity of wastewater microbial communities. Although qPCR can be used to provide more specific and accurate quantification than other molecular techniques, it does have limitations that must be considered when applying it in practice. This article reviews the principle of qPCR quantification and its applications to microbial ecology studies in various wastewater treatment environments. Here we also address several limitations of qPCR-based approaches that can affect the validity of quantification data: template nucleic acid quality, nucleic acid extraction efficiency, specificity of group-specific primers and probes, amplification of nonviable DNA, gene copy number variation, and limited number of sequences in the database. Even with such limitations, qPCR is reportedly among the best methods for quantitatively investigating environmental microbial communities. The application of qPCR is and will continue to be increasingly common in studies of wastewater treatment systems. To obtain reliable analyses, however, the limitations that have often been overlooked must be carefully considered when interpreting the results.     

Genotoxicity biomonitoring of sewage in two municipal wastewater treatment plants using the Tradescantia pallida var. purpurea bioassay

The genotoxicity of untreated and treated sewage from two municipal wastewater treatment plants (WTP BN and WTP SJN) in the municipality of Porto Alegre, in the southern Brazilian state of Rio Grande do Sul, was evaluated over a one-year period using the Tradescantia pallida var. purpurea (Trad-MCN) bioassay. Inflorescences of T. pallida var. purpurea were exposed to sewage samples in February (summer), April (autumn), July (winter) and October (spring) 2009, and the micronuclei (MCN) frequencies were estimated in each period. The high genotoxicity of untreated sewage from WTP BN in February and April was not observed in treated sewage, indicating the efficiency of treatment at this WTP. However, untreated and treated sewage samples from WTP SJN had high MCN frequencies, except in October, when rainfall may have been responsible for reducing these frequencies at both WTPs. Physicochemical analyses of sewage from both WTPs indicated elevated concentrations of organic matter that were higher at WTP SJN than at WTP BN. Chromium was detected in untreated and treated sewage from WTP SJN, but not in treated sewage from WTP BN. Lead was found in all untreated sewage samples from WTP SJN, but only in the summer and autumn at WTP BN. These results indicate that the short-term Trad-MCN genotoxicity assay may be useful for regular monitoring of municipal WTPs.     

Nano-Scale Pollutants: Fate in Irish Surface and Drinking Water Regulatory Systems

Nano-functionalized products such as UV protective paints additives, antimicrobial food packaging, and fuel additives offering reduced CO₂ emissions have the potential to secure a significant Irish market share in the near future. This scoping study gives a first estimation of nanomaterial surface water concentrations and population ingestional exposure through drinking water resulting from these products. As nanomaterial behavior in wastewater treatment plants (WWTPs) and water treatment plants (WTPs) is currently unclear, bridging data relating to potentially relevant materials (pharmaceuticals and metal removal efficiencies in WWTPs; pathogen removal efficiencies in WTPs) are employed in this study. Mean nanomaterial removal efficiencies of 59.8% and 70.2% were predicted for Irish WWTPs, between 96.95% and 0% for Irish WTPs. Predicted nano-scale TiO₂ concentrations in surface waters (resulting from exterior paints) were 2 orders of magnitude greater than that of Ag (resulting from food packaging) and CeO₂ (resulting from fuel additives), respectively. Predicted surface and drinking water concentrations were unlikely to pose any ecotoxicological or human health risk, although nano-scale TiO₂ and Ag may warrant monitoring as part of standard surface water monitoring schemes. Future research should be directed toward characterizing the behavior of different categories of nanomaterials within WWTP processes.     

An economic evaluation of phosphorus recovery as struvite from digester supernatant

Phosphorus can be recovered from wastewater through crystallisation of struvite, MgNH(4)PO(4).6H(2)O. Approximately 1 kg of struvite can be crystallised from 100 m(3) of wastewater. Crystallisation is profitable compared to chemical and biological removal of phosphorus due to savings from the reduction in (i) chemicals used for precipitation and sludge disposal; and (ii) downtime for cleaning unwanted struvite formed during chemical and biological removal. The struvite produced annually from a wastewater treatment plant that processed 100 m3/d, would be sufficient to apply on 2.6 ha of arable land, as fertilizer. If struvite were to be recovered from wastewater treatment plants worldwide, 0.63 million tons of phosphorus (as P(2)O(5)) could be harvested annually, reducing phosphate rock mining by 1.6%. Therefore, this technology could provide opportunities to recover phosphorus sustainably from waste streams and preserve phosphorus reserves.     

A Survey of Cryptosporidium Oocysts in Water Supplies during a 10-Year Period (2000-2009) in Seoul

This study has been conducted to estimate the occurrence of Cryptosporidium oocysts in water supplies in the Metropolitan area of Seoul, South Korea, for 10 years from 2000 to 2009. Water samples were collected quarterly at 6 intakes in the Han River and its largest stream and 6 conventional Water Treatment Plants (WTPs) serving drinking water for 10 million people of Seoul. Cryptosporidium oocysts were found in 22.5% of intake water samples and arithmetic mean was 0.65 oocysts/10 L (range 0-22 oocysts/10 L). Although the annual mean of oocyst number was as low as 0.04-1.90 oocysts/10 L, 3 peaks in 2004 and 2007 were observed and the pollution level was a little higher in winter. The lowest density was observed at Paldang intake and the pollution level increased at Kuui and Jayang intakes. At the end of the largest stream, oocysts were found in 70% of collected samples (mean 5.71 oocysts/10 L) and it seemed that its joining the Han River resulted in the increase at Kuui intake and downstream. Oocyst removal by physical process exceeded 2.0-2.3 log and then all finished water samples collected at 6 WTPs were negative for Cryptosporidium in each 100 L sample for 10 years. These results suggested that domestic wastewater from the urban region could be a source of Cryptosporidium pollution and separating sewage systems adjacent to the intakes could be meaningful for some intakes having weakness related to parasitological water quality.     

Minimizing outputs: treatment

Many methods are available for the treatment of industrial wastewaters. The pollutant concentrations from aquaculture facilities are often low, but occur in high flow rates. Consequently, much care must be taken to transfer suitable technology. Of the four main types of treatment unit processes, i.e. biological, chemical, mechanical and gravitational, the latter two types are most commonly employed in flow-through aquaculture facilities in Europe. This paper identifies the properties of the wastewater upon which the units operate, the efficiency of selected examples and their suitability for various applications. Relevant strategies are recommended. A combination of screening to remove suspended particles, followed by sedimentation to thicken the resulting sludge appears, at resent, to be the most appropriate primary treatment strategy for flow-through facilities. Various other secondary or even tertiary techniques can be employed to further treat tie main effluent. These can, however, prove prohibitively expensive in high flow situations and can produce negligible improvements in environmental protection.     

污水生物处理中的噬菌体及其功能研究进展

污水生物处理是一种利用微生物分解污水中的污染物、实现污水净化的方法。噬菌体是侵染细菌的病毒,在污水生物处理系统中广泛存在,它们能够特异性地控制微生物菌群,影响污水处理效果和调控污泥性状。因此,研究污水生物处理中噬菌体的分布及其功能具有重要意义。本文介绍了不同污水生物处理中噬菌体的分布,简要分析了噬菌体分离、培养与鉴定方法及其优缺点,详细总结了噬菌体在污水生物处理中的功能,包括:(1)调节微生物群落结构,影响污水处理效果;(2)作为环境监测的指示生物;(3)控制病原菌、污泥膨胀、污泥发泡和膜污染;(4)减少污泥产量,重点分析了影响噬菌体功能的因素,探讨了污水生物处理中噬菌体功能应用存在的问题及其解决方法,最后对噬菌体未来应用的发展方向进行了展望,以期为污水生物处理技术和工艺的开发与应用提供参考,促进污水处理健康发展。     

A ten-year survey of Giardia cysts in drinking water supplies of Seoul, the Republic of Korea

To understand the distribution of Giardia cysts in drinking water supplies in Seoul, Korea, we collected water samples quarterly at 6 intakes in the Han River, its largest stream and 6 conventional water treatment plants (WTPs) serving drinking water, from 2000 to 2009. Giardia cysts in each of 10 L water were confirmed in 35.0% of intake water samples and the arithmetic mean was 1.65 cysts/10 L (range 0-35 cysts/10 L). The lowest cyst density was observed at Paldang and Kangbuk intakes, and the pollution level was higher at 4 intakes downstream. It seemed that these 4 intakes were under influence of Wangsuk stream at the end of which cysts were found in all samples with the mean of 140 cysts/10 L. The annual mean number of cysts was 0.21-4.21 cysts/10 L, and the cyst level at the second half of the 10 years was about 1/5 of that at first half on average. The cysts were more frequently found in winter, and their mean density was 3.74 cysts/10 L in winter and 0.80-1.08 cysts/10 L in other seasons. All finished water samples collected at 6 WTPs were negative for Giardia in each of 100 L sample for 10 years and cyst removal by physical process was average 2.9-log. It was concluded that conventional water treatment at 6 WTPs of Seoul appears to remove the cysts effectively under the present level of their source water. Domestic wastewater from the urban region could be an important source of Giardia pollution in the river.     

Here a virus, there a virus, everywhere the same virus?

There are an estimated 10(31) viruses on Earth, most of which are phages that infect bacteria. Metagenomic analyses have shown that environmental viral communities are incredibly diverse. There are an estimated 5000 viral genotypes in 200 liters of seawater and possibly a million different viral genotypes in one kilogram of marine sediment. By contrast, some culturing and molecular studies have found that viruses move between different biomes. Together, these findings suggest that viral diversity could be high on a local scale but relatively limited globally. Also, by moving between environments, viruses can facilitate horizontal gene transfer.     

Constructed Wetlands for Tannery Wastewater Treatment in Portugal: Ten Years of Experience

Wastewaters from tannery industry are complex in composition and providing adequate treatment can be difficult. Constructed wetlands (CW) are regarded as an alternative treatment to the conventional biological systems, as a developing cost-effective and environmentally friendly phytoremediation technology. The present review compiles and integrates information on CWs technology for the needs of the tannery sector. The following issues arise as crucial for the implementation of such systems, namely i) an accurate wastewater characterization and an effective pretreatment before reaching the CW, ii) choosing the plants species better adapted to the imposed conditions, iii) substrate selection and iv) range of organic loadings applied. The examples practiced in Portugal give indication that horizontal subsurface flow systems, with expanded clay media, are a suitable option to be considered when dealing with high organic loading tannery wastewater (up to c.a. 3800 kgCODha^?1d^?1), being resilient to a wide range of hydraulic variations. Plants such as Phragmites and Typha have shown to be adequate for tannery wastewater depuration, with Arundo donax proving resilient to high salinity wastewaters. The flexibility of implementation allows the CW to be adapted to different sites with different configurations, being suitable as main secondary or tertiary treatment stage.     

Strategies and Practices for Sustainable Use of Water in Industrial Papermaking Processes

The problem of water use in industrial sectors is analyzed in the context of sustainability, and the manufacturing process as one of the most important water consumers is scrutinized. Some practices of water conservation and reduction of water consumption, as well as the implementation of advanced treatment processes for wastewater recycling are considered under the general aspect of process integration and control in order to minimize environmental discharges. Reduction of effluents in papermaking processes are discussed as well as preventative approaches. It is emphasized that four groups of methods can be applied in order to minimize water consumption: process changes, water reuse, regeneration reuse and regeneration recycling. Minimizing the water consumption and thus reducing the hydraulic load may help to improve effluent treatment, reduce operating costs and, when subsequent disposal is to sewers, minimize effluent disposal charges. The data presented show that initially producing less effluents will reduce the demands on the effluent treatment plant and thus save both money and efforts. Separation techniques for minimizing effluents and effluent loads are presented, as well as potential practices to ensure a sustainable use of water, grouped as short term and long term measures. Prevention measures for water consumption in a Romanian paper mill are considered and discussed in relation with best available techniques (BAT), taking into account both economical and environmental benefits.     

Sludge minimisation technologies

The treatment and disposal of excess sludge represents a bottleneck of wastewater treatment plants all over the world, due to environmental, economic, social and legal factors. There is therefore a growing interest in developing technologies to reduce the wastewater sludge generation. The goal of this paper is to present the state-of-the-art of current minimisation techniques for reducing sludge production in biological wastewater treatment processes. An overview of the main technologies is given considering three different strategies: The first option is to reduce the production of sludge by introducing in the wastewater treatment stage additional stages with a lower cellular yield coefficient compared to the one corresponding to the activated sludge process (lysis-cryptic growth, uncoupling and maintenance metabolism, predation on bacteria, anaerobic treatment). The second choice is to act on the sludge stage. As anaerobic digestion is the main process in sewage sludge treatment for reducing and stabilising the organic solids, two possibilities can be considered: introducing a pre-treatment process before the anaerobic reaction (physical, chemical or biological pre-treatments), or modifying the digestion configuration (two-stage and temperature-phased anaerobic digestion, anoxic gas flotation). And, finally, the last minimisation strategy is the removal of the sludge generated in the activated sludge plant (incineration, gasification, pyrolysis, wet air oxidation, supercritical water oxidation).